Fork Parts / Service

—$78

36 Rhythm Air Shaft AssemblyMPN: 820-02-545-KIT

by FOX

—$220

Replacement CSU Components for RockShoxMPN: 11.4018.099.002

by RockShox

—$39

One of the single biggest improvements you can make to your fork. Engineered and developed over several years, the PUSH Ultra Low Friction fork seals provide class leading sealing while offering incredibly low friction, resulting in an increase in small bump sensitivity. (2) fork seals, (2) foam rings, crush washers, a travel indicator, and a P-Icon sticker Advanced friction-reducing, Molybdenum filled material increases small bump sensitivity while also increasing durability Dual scraping lip design provides maximum scraping effect while minimizing friction Loaded oil sealing lip integrated into wiper to keep lower leg fluid from escaping fork, increasing performance and durability High-volume, absorbent foam rings ensure consistent lubrication improving seal life and bump sensitivity Molded utilizing precision 3D machined molds for exact tolerance MPN: PFS-32-600-RS-PK

by PUSH Industries

—$40

Replacement top caps and parts for RockShox forks.MPN: 11.4015.461.020

by RockShox

—$45

RockShox Basic Service Kits include dust seals, foam rings, o-ring seals Item Specifications Fits Lyrik MPN: 00.4315.032.100

by RockShox

—$130

RockShox 32mm Seal Kit for repair and maintenance of Rockshox suspension forks.MPN: 11.4018.028.003

by RockShox

—$100

RockShox Motion Control For Remote Compression DampersMPN: 11.4015.544.420

by RockShox

—$435

RockShox 35mm Crown/Steerer/Uppertube AssembliesNo gradientsMPN: 11.4018.008.440

by RockShox

—$55

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 160 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) MPN: 18976-05

by Ohlins

—$78

FOX 34 SL suspension fork air shaft assemblies for service and repair.MPN: 820-02-710-KIT

by FOX

—$115

The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. Includes air shaft assembly, ButterCup & seal head Can be used to change travel Compatible with PIKE C1+(2023+) models: FS-PIKE-SEL-C1, FS-PIKE-UFA-C2, FS-PIKE-ULT-C1, FS-PIKE-ULT-C2 MPN: 00.4318.064.003

by RockShox

—$85

The Charger 3.1 RC2 Piston Kit upgrades existing Charger 3 dampers to the NEW Charger 3.1. With increased damping range, Charger 3.1 RC2 is primed to take on any trail. Less compression damping in the Low Speed Compression open position and additional support in the High Speed Compression closed position gives you the traction, control, and comfort you need to charge dicey lines all day. Upgrades existing Charger 3 dampers to Charger 3.1 Includes piston assembly, tuning shims, and Head Valve Tool Compatible with BoXXer D1+ (2024+) Pike C1+(2023+), Lyrik D1+(2023+), and ZEB A1+(2021+) Charger 3 dampers MPN: 00.4318.096.000

by RockShox

—$295

The lightest production damper. Ever. Performance packed with a rock-solid lockout to power up climbs and smash through sprint finishes. Every detail machined and optimized to save on weight and maximize your performance Factory tuned compression (in open position) provides the highest level of XC performance, precision and control Maximum efficiency with a rock-solid lockout MPN: 00.4318.087.001

by RockShox

—$42

Thru-axles engineered for a better ride! Designed and tested in the rugged conditions of Colorado, these thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look. A unique captive rotating thru-axle washer reduces friction on dropouts during installation, allowing for a precise fit and prevents damage when torquing. Whether you are looking to upgrade or replace an existing factory axle, these thru-axles will fit a wide variety of bike and fork models. Designed, machined and tested in Colorado, USA 5mm hex on both ends of the axle for easy installation and removal 7075 aluminum with hard anodized finish for extra durability Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage Axle length is compatible +/- 2mm An ideal replacement for OEM thru-axles Item Specifications Axle Diameter (mm) 12 Color Black Length 175 Overall Length (mm) 175 Rear Axle Type 12mm Thru-axle Thread Length (mm) 18 Thread Pitch 1 MPN: RTA-12-175-1.0

by Wheels Manufacturing

—$45

Domain Debonair shaft for repair and maintenance of Rockshox suspension.MPN: 11.4018.111.018

by RockShox

—$25.99

RockShox Seal Head AssembliesMPN: 11.4018.096.005

by RockShox

—$115

The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. Includes air shaft assembly, ButterCup & seal head Can be used to change travel Compatible with Lyrik D1+(2023+) models: FS-LYRK-SEL-D1, FS-LYRK-UFA-D2, FS-LYRK-ULT-D1, FS-LYRK-ULT-D2 MPN: 00.4318.065.000

by RockShox

—$17.99

Volume Spacer tuning kits for FOX suspension fork service and repairs.Sold in Qty 5 Item Specifications keyword search 234-04-735 MPN: 803-01-665

by FOX

—$29

Service your suspension fork with the Enduro HyGlide Fork Seal Kit. HyGlide seals utilize the material and design advantages of our two-part seals (Polyurethane wipers and Moly-Disulphide-infused oil seals) and combine them into a single wiper/oil seal. This unique design joins the oil seal and wiper into a single unit, creating a sealing system that eliminates one of the sealing lips and decreases seal friction or "stiction" by 25%. The cold-fused integrated seal design also features a large oil cavity between the two sealing lips to prevent contamination and further ease fork's movement. This seal kit includes HyGlide integrated upper wiper/lower oil seal, foam rings and crush washers for RockShox 32mm suspension forks HyGlide seal superior sealing action and can increase fork service intervals by as much as 2 or 3 times compared to OE recommendations MPN: FKH-7010

by Enduro

—$34.99

Salsa Split Pivot Suspension Service Kits. Main pivot hardware kit for Super Boost 142mm and 148 mm spacing Split Pivot suspension bike Fits all Split Pivot Suspension bikes with 142mm and 148 mm rear hub spacing Fits Rustler Carbon and Alloy V1, 2019+ Fits Spearfish Carbon and Alloy V1, 2014-2018 Fits Horsethief Carbon and Alloy V2, 2014-2018 Fits Pony Rustler Carbon and Alloy, 2016-2018 Fits Deadwood Sus Carbon and Alloy, 2017-2018 MPN: 06-001586-A

by Salsa

—$44

Top Caps for Fox suspension fork service and repair.MPN: 820-05-500-KIT

by FOX

—$80

RockShox Fork Compression DampersMPN: 11.4018.009.039

by RockShox

—$220

Replacement CSU Components for RockShoxMPN: 11.4018.093.001

by RockShox

—$20.99

RockShox XLoc PartsMPN: 11.4318.001.000

by RockShox

—$45

RockShox Basic Service Kits include dust seals, foam rings, o-ring seals Item Specifications Fits Lyrik MPN: 00.4315.032.090

by RockShox

—$28.99

Enduro Bushing & Seal KitsIncludes 2 black oil seals & 2 blue wiper seals Item Specifications Fits Lyrik/Domain MPN: FK-6660

by Enduro

—$45

RockShox Basic Service Kits include dust seals, foam rings, o-ring seals Item Specifications Fits BoXXer MPN: 00.4315.032.170

by RockShox

—$45

200 Hour Service Kit for the repair and maintenance of RockShox forks. Performing yearly maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike.Includes dust seals, foam rings, o-ring seals, Charger 2 sealhead, Solo Air sealheadMPN: 00.4315.032.641

by RockShox

—$140

RockShox Motion Control DNA for Remote Compression DampersMPN: 11.4015.544.080

by RockShox

—$50

RockShox Full Service Kits for service and repairs.Includes Solo Air and damper seals and hardwareMPN: 11.4018.065.003

by RockShox

—$80

RockShox Full Service Kits for service and repairs.Includes upgraded seal head, Solo Air and damper seals and hardwareMPN: 11.4018.027.005

by RockShox

—$45

RockShox Basic Service Kits provide replacement dust seals, foam rings, o-ring seals, etc. for regular maintenance intervals. Kit includes: dust seals, foam rings, o-ring seals Helps maintain proper fork function MPN: 00.4315.032.550

by RockShox

—$34

Seal kits for Fox suspension repair and rebuild.MPN: 803-04-091

by FOX

—$47

The Ohlins lower leg seal kit includes blue SKF scrapers, foam rings and Sag/Travel o-ring for 100 hour chassis service. Lower leg seal kit for Ohlins RXF34 and RXC34 forks with 34mm stancions Blue colored energized scrapers are made by SKF and ensure grit is pushed off without adding unnecessary friction Foam rings soaked in bath oil during installation ensure smooth action and no dirt bypassing into the bushings Include (2) blue scrapers, (2) foam rings, and (1) sag/travel o-ring MPN: 19542-01

by Ohlins

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX 38 Factory 2021+ and FOX 38 Factory, Performance Elite, and Performance 2021+ New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MPN: WB-25-2182

by MRP

—$88

The Ohlins 200 hour rebuild kit for their suspension fork air spring cartridges includes all major wear items for a more thorough rebuild. Thorough rebuild kit (also called the "200-hour" kit) for the 3-chamber air spring cartridge The 3-chamber air spring cartridge is found in all RXF36, RXF38, and DH38 forks Use this kit if the fork has skipped a few services, has been abused, or exhibits any signs of leaking Includes less common wear items, such as Schrader valves, IFP bump rubber, and seal head scrapers (Please note that not all parts will be used upon completion Individually labeled when necessary to ease identification MPN: 18850-13

by Ohlins

—$44

Air spring seal kits for Fox suspension repair and rebuild.MPN: 803-04-352

by FOX

—$93

FOX 36 SL suspension fork air shaft assemblies for service and repair.MPN: 820-02-273-KIT

by FOX

—$55

Debonair Shafts for repair and maintenance of Rockshox SID and SID SL suspension forks.MPN: 11.4018.111.036

by RockShox

—$45

Domain Debonair shaft for repair and maintenance of Rockshox suspension.MPN: 11.4018.111.017

by RockShox

—$43.99

MTB fork seals are a vital protective part of the overall front suspension system, with a crucial impact on riding comfort and trouble-free operation in the harshest environments. This completely redesigned fork seal - adding on to SKF's well established fork seals range that has already been available on the market for more than 10 years - consists of newly developed rubber compounds and new geometries for both the scraper lip and the sealing lip. The co-molded combination of compounds, together with improved sealing lip properties, offers enhanced followability on the shaft. In addition, there is a new metal insert and an open wound spring on the dirt scraper lip, effectively preventing the ingress of contaminants. Fits Rockshox 32mm Extended sealing capability Improved contamination exclusion Reliable protection of the interior fork mechanism Minimum friction for enhanced control MPN: MTBDUAL-32RN

by SKF

—$43.99

MTB fork seals are a vital protective part of the overall front suspension system, with a crucial impact on riding comfort and trouble-free operation in the harshest environments. This completely redesigned fork seal - adding on to SKF's well established fork seals range that has already been available on the market for more than 10 years - consists of newly developed rubber compounds and new geometries for both the scraper lip and the sealing lip. The co-molded combination of compounds, together with improved sealing lip properties, offers enhanced followability on the shaft. In addition, there is a new metal insert and an open wound spring on the dirt scraper lip, effectively preventing the ingress of contaminants. Fits FOX Air 32mm, All Models Extended sealing capability Improved contamination exclusion Reliable protection of the interior fork mechanism Minimum friction for enhanced control MPN: MTBDUAL-32FN

by SKF

—$78

38 Rhythm Air Shaft Assembly for FOX suspension service and repair. MPN: 820-02-629-KIT

by FOX

—$329

FOX 38 Crown/Steerer/Uppertube Assembies for service and repair.MPN: 820-12-473-KIT

by FOX

—$56

Top Caps for Fox suspension fork service and repair.MPN: 820-05-520-KIT

by FOX

—$40

Replacement compression knobs for RockShox suspension forks.MPN: 11.4018.082.043

by RockShox

—$20.99

RockShox Seal Head AssembliesMPN: 11.4018.096.004

by RockShox

—$44

32 Air Shaft AssemblyMPN: 820-02-416-KIT

by FOX

—$220

Replacement CSU Components for RockShoxMPN: 11.4018.099.003

by RockShox

—$165

Make a good fork a great fork. Introducing the Luftkappe air piston kit for Fox Float forks. The Luftkappe is available for: 34 Float NA2 (2016-17) Performance & Factory Series (130mm + only - 120mm and lower need the 2018 Evol air shaft before a Luftkappe can be fitted) 34 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA (2015-17) Performance & Factory Series (max 180mm travel, min 120mm travel) Pinkbike: "The Luftkappe's change to the feel of the Lyrik was immediately noticeable on the trail. Traction was increased across chatter and the fork remained higher in its travel and more stable, improving the dynamic ride height without sacrificing the top end. My confidence soared when hitting sections with a lot of chatter and mid to large-sized hits, and the result meant more comfort and speed through such sections." Taking everything we learned with the Corset air sleeves and the Luftkappe we developed for the Pike, Yari & Lyrik, this second generation Luftkappe is a new air piston assembly for Fox's 34 NA2/Evol and 36 Evol forks. User installable and simple to set up, the Luftkappe transforms a good fork into a great fork. Softer initial stroke Larger negative air chamber Increased sag without the associated diving Coil-like initial & mid-stroke spring rate without excessive bottoming Increased sensitivity Improved mid stroke support & control Superior bump compliance and traction Reduced hand fatigue Reduces required compression damping Retains volume spacer compatibility Optional tools available for self-install What's included in the kit: 34 Evol: Upgrade low friction air piston assembly. 34 NA2: Upgrade low friction air piston assembly & upgrade low friction, low profile sealhead 36 Evol: Upgrade low friction air piston assembly. 36 NA: Upgrade low friction air piston assembly & upgrade topout spacer ring Note: If your 36 Evol tops out noticeably, you will need to replace your air shaft assembly before purchasing the Luftkappe. Fox have updated this part due to the topout issues that many of the 2018 36 Evol forks had. 34 forks do not have this issue. Relevant Fox part numbers for the new air shaft assemblies, by travel: 180mm: 820-02-534-KIT 170mm: 820-02-535-KIT 160mm: 820-02-536-KIT 150mm: 820-02-537-KIT 140mm: 820-02-538-KIT 100mm (36 831): 820-02-539-KIT If your fork does not have noticeable top-out issues, you don't need to replace the shaft before installing the Luftkappe. FAQ: 1. Can I install it myself? Yes, provided you have access to the supplies and tools listed in the installation instructions above. If you're really crafty (and EXTREMELY careful) it is possible to install the Luftkappes (all Evol variants) without the installation tools, however the risk of damaging things is much higher and we really don't recommend trying. If you choose to take this route and damage your air shaft (or anything else), we cannot be held responsible - we make the tools available for a reason. It is not possible to install the 34 NA2 Luftkappe kit without 10mm shaft clamps and the bullet tool - you'll damage the shaft AND damage the seals on the new sealhead. 2. Does it work with TALAS forks? No, sorry. 3. Does it work with versions of the 36 prior to 2015? No, sorry! 4. Does it work with 32s or 40s? No, sorry. 5. How does it actually work? It enlarges the negative air chamber to reduce the initial spring rate. This lets you run higher air pressure for more support in the middle and end of the stroke with improved sensitivity in the start of the stroke. 6. Is it compatible with MRP's Ramp Control cartridge? Generally speaking no. If you are running your fork at least 30mm shorter than its maximum available travel, then yes. 7. Shouldn't I just buy a new fork instead? Sure, they're about the same price as the Luftkappe. 8. What parts does it actually replace in the air spring? It replaces the plastic piston itself, and the rubber topout bumper in the 34s is removed but not replaced (36 topout assembly is unchanged). You reuse your air shaft, though the 34NA2 kit comes with a replacement low friction, low profile sealhead comparable in size to the stock 2018 Evol sealhead. This is also why the NA2 kit is more expensive than the other two - it's basically a 2018 Factory update on top of a Luftkappe. 9. Who is this NOT suited for? The Luftkappe is outright superior to the stock air spring for nearly everyone, however there are a few cases where it might not be for you: - If you run your 36 at 180mm, it will be quite progressive. You may like it, but you may also find it hard to use the last 5-10mm of travel - if this would bother you then have a think about it first. At 170mm and below it will be fine. - If you like running really low sag for some reason. The Luftkappe runs more sag than the stock fork, but is firmer in the mid stroke - similar to a coil fork, but with ending-stroke ramp up to prevent harsh bottoming. If you're the kind of person who wants the fork to run 5% sag, this isn't for you. We could point out that a setup like that probably just means your handlebars are set too low and you're compensating with oversprung suspension, but we aren't here to judge you, so maybe just don't buy it. - If you're anal about your fork having an exact (but rounded-to-the-nearest-10mm) amount of travel. Because the Luftkappe balances forces at a pneumatic topout, the force right around topout is very low (literally zero other than friction), meaning the weight of the bike alone will cause it to sag a few millimetres. Your car's suspension sags under the vehicle's own weight, so should your bike - unless it was so sticky, overly stiff or over-preloaded that 10kg of bike weight wasn't enough to cause your suspension to move at all, of course. If only having an apparent 148mm out of a 150mm fork is a big deal for you, stick with the stock fork. (in)Compatibility Information: Luftkappe IS available for: 34 Float NA2 (Performance, Performance Elite and Factory Series, 2016-17), 130mm and higher travel 34 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA1 (NA) Not compatible with: Rhythm-series forks E-bike specific forks Non-Evol (pre-2018) 36 forks 34mm forks for 29" wheels with 150mm or more travel Pre-2016 34 forks Pre-2016 34 forks that were later updated with the factory NA air system update Any TALAS forks Any 32mm forks Any 40mm forksMPN: VS-36-NA-15-17-SC

by Vorsprung