Fork Parts / Service

—$35

RockShox Full Service Kits for service and repairs.MPN: 11.4018.007.000

by RockShox

—$155

RockShox XLoc PartsIncludes hose/banjoMPN: 11.4315.013.050

by RockShox

—$39.95

White Bros LOOP Seal Kits Item Specifications Fits LOOP MPN: 102675

by MRP

—$90

RockShox Recon Spring Kits Item Specifications Fits Recon ,Recon MPN: 11.4018.010.036

by RockShox

—$395

RockShox 35mm Crown/Steerer/Uppertube AssembliesMPN: 11.4018.008.419

by RockShox

—$78

Replacement parts for Fox suspension forks.For use with remotely controlled 3-position FOX suspension forks and rear shocksMPN: 820-07-190

by FOX

—$10.99

RockShox crown hardware for use in repairs or replacementUpper and lower crown hardware for use on SRAM Boxxer D1+ (2024+) suspension forksMPN: 11.4018.135.001

by RockShox

—$70

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 50 lbs/in spring rate intended for riders weighing between 180 lbs to 200 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (50 lbs/in has blue bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 4.6 mm wire diameter MPN: 19287-03

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. Ohlins offers a wide range of 7 fork spring rates for the RXF38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins RXF38 fork 50 lbs/in spring rate intended for riders weighing between 180 lbs to 200 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (50 lbs/in has blue bands) 191 mm of actual stroke 335 mm (+/- 3mm) free length 18.5 mm I.D. / 4.6 mm wire diameter MPN: 19286-03

by Ohlins

—$93

FOX 36 SL suspension fork air shaft assemblies for service and repair.MPN: 820-02-275-KIT

by FOX

—$93

FOX 36 SL suspension fork air shaft assemblies for service and repair.MPN: 820-02-274-KIT

by FOX

—$340

New for model year 2025 is the Fox GRIP X Damper. Built off of the foundation of the wildly successful GRIP2 damper, the GRIP X is built for utmost performance while keeping the adjustments relatively simple. The GRIP X shares most of the same structure of the GRIP X2 (which is more adjustable with high speed rebound) while weighing 120 grams less. This upgrade kit will fit any 2020 and newer Fox 38. This upgrade kit includes (1) Fox GRIP X damper which is compatible with all Fox 38 models. This upgrade allows you to independently adjust High & Low Speed Compression and Low Speed Rebound. Variable Valve Control (VVC) on the rebound circuit. Pair up your GRIP X fork damper with a DHX or Float X rear shock to maintain similar suspension performance and adjustability front and rear. GRIP X Damper requires the following FOX 4wt Suspension Oil - 1 liter MPN: 820-18-522-KIT

by FOX

—$395

Built with input from the world's best riders, Charger 3.1 RC2 is a brilliant evolution of SRAM's proven damper platform. With increased damping range and High Speed Compression (HSC), Low Speed Compression (LSC), and Low Speed Rebound adjustments, Charger 3.1 RC2 smooths out the roughest trails. Compatible with RockShox FS-ZEB-R-A1, FS-ZEB-SEL-A1, FS-ZEB-SEL-A2, FS-ZEB-ULT-A1, FS-ZEB-ULT-A2, FS-ZEB-ULT-A3 Charger 3.1 RC2 s adjustment range is broader with less compression damping in the LSC open position and additional support in the HSC closed position, this gives you the traction, control, and comfort you need to charge dicey lines all day Includes full right-side internals including controls High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments Includes vibration-fighting ButterCups to block 20% of trail chatter MPN: 00.4318.095.002

by RockShox

—$42

Thru-axles engineered for a better ride! Designed and tested in the rugged conditions of Colorado, these thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look. A unique captive rotating thru-axle washer reduces friction on dropouts during installation, allowing for a precise fit and prevents damage when torquing. Whether you are looking to upgrade or replace an existing factory axle, these thru-axles will fit a wide variety of bike and fork models. Designed, machined and tested in Colorado, USA 5mm hex on both ends of the axle for easy installation and removal 7075 aluminum with hard anodized finish for extra durability Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage Axle length is compatible +/- 2mm An ideal replacement for OEM thru-axles Item Specifications Axle Diameter (mm) 12 Color Black Length 165 Overall Length (mm) 165 Rear Axle Type 12mm Thru-axle Thread Length (mm) 22 Thread Pitch 1.75 MPN: RTA-12-165-1.75

by Wheels Manufacturing

—$40

Thru-axles engineered for a better ride! Designed and tested in the rugged conditions of Colorado, these thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look. A unique captive rotating thru-axle washer reduces friction on dropouts during installation, allowing for a precise fit and prevents damage when torquing. Whether you are looking to upgrade or replace an existing factory axle, these thru-axles will fit a wide variety of bike and fork models. Designed, machined and tested in Colorado, USA 5mm hex on both ends of the axle for easy installation and removal 7075 aluminum with hard anodized finish for extra durability Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage Axle length is compatible +/- 2mm An ideal replacement for OEM thru-axles Item Specifications Axle Diameter (mm) 15 Color Black Front Axle Type 15mm Thru Axle Length 158 Overall Length (mm) 158 Thread Length (mm) 9 Thread Pitch 1.5 MPN: FTA-15-158-1.5

by Wheels Manufacturing

—$45

Domain Debonair shaft for repair and maintenance of Rockshox suspension.MPN: 11.4018.111.016

by RockShox

—$71

34 Step-Cast Air Shaft AssemblyMPN: 820-02-595-KIT

by FOX

—$237

34 Step-Cast Damper Assembly for Fox suspension forks.MPN: 820-18-286-KIT

by FOX

—$409

FOX 38 Crown/Steerer/Uppertube Assembies for service and repair.MPN: 820-12-464-KIT

by FOX

—$39

Seal kits for Fox suspension repair and rebuild.MPN: 803-01-549

by FOX

—$349

FOX 36 Crown/Steerer/Uppertube Assembies for service and repair.MPN: 820-12-555-KIT

by FOX

—$18.99

Replacement compression knobs for RockShox suspension forks.MPN: 11.4018.082.038

by RockShox

—$75

The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system. Overall length: 125 Thread length: 9mm Thread pitch: M15x1.5 Item Specifications Axle Diameter (mm) 15 Color Black Over Locknut (mm) 100 Overall Length (mm) 125 Thread Length (mm) 9 Thread Pitch 1.5 Weight 76 MPN: 00.4318.005.006

by RockShox

—$220

Replacement CSU Components for RockShoxMPN: 11.4018.094.001

by RockShox

—$85

RockShox Motion Control Compression DampersMPN: 11.4018.088.000

by RockShox

—$145

RockShox XLoc PartsMPN: 11.4318.000.000

by RockShox

—$30.99

RockShox Seal HeadMPN: 11.4018.037.000

by RockShox

—$45

RockShox Basic Service Kits include dust seals, foam rings, o-ring seals Item Specifications Fits Lyrik MPN: 00.4315.032.110

by RockShox

—$35

RockShox Service Kits include o-rings, glide rings, air valve caps, air valves, c-clips, bottom out bumpers, crush washer, etc. Kits include many extra parts to cover all years and models. Item Specifications Fits Revelation MPN: 11.4015.553.000

by RockShox

—$190

RockShox XLoc PartsMPN: 11.4315.013.080

by RockShox

—$77

Ohlins complete fork seal head assembly for all Ohlins 3-chamber air cartridge forks. The kit includes an updated m.2-spec "L-cup" scraper to ensure less oil and dirt ingestion, also increasing negative volume. Great upgrade for older RXF forks. Complete seal head replacement for all Ohlins forks with 3-chamber air spring cartridges Blue seal head features an upgraded scraper that significantly reduces oil ingestion, enabling the use of more bath oil The "Blue" seal head also has more negative volume available, which means a more supple off-the-top feel, and helps combat initial stiction Includes a white volume spacer pre-installed to help tune the negative air volume Retrofittable to all 3-chamber forks: RXF 36, 38, and DH38 MPN: 18976-50

by Ohlins

—$215

The Ohlins coil spring kit for DH38 suspension fork allows the rider to swap from the standard air spring to a coil spring setup. Due to the unique Ohlins air cartridge design, the fork can be exchanged between coil and air indefinitely. Experience the lower friction, initial suppleness, and lack of maintenance a coil spring offers. Two important notes: The actual spring IS NOT INCLUDED (Sold Separately). Requires Ohlins coil tool for installation (Sold Separately). Intended for DH38 fork series Kit includes the top cap with adjustable preload and the bottom coil shaft (Spring Sold Separately) Adjustable travel from 160 mm up to 200 mm Arrives from the factory set up in 200mm Allows riders to indefinitely swap between air and coil spring options Requires Ohlins coil tool for installation (Sold Separately) MPN: 19284-01

by Ohlins

—$28.99

Fox Float NA Air Spring Rebuild Kit.MPN: 803-04-351

by FOX

—$419

FOX 36 SL suspension fork complete damper assemblies for service and repair.MPN: 820-18-540-KIT

by FOX

—$470

hlins offers four different crown sets for DH38 suspension fork that differ in offset, allowing riders to further customize their ride. Offset is the distance between the wheel axle and the steerer tube and affects how the bike steers by changing the "trail" dimension. There are three different offsets: 46mm, 50mm, 54mm, and 58mm. Typically, shorter offsets are more stable but require more steering input to change direction. The opposite is true, too; the longer the offset, the easier it is to steer, but it will be less stable at speed. Most DH bikes with 29" wheels use 58mm and 54mm offset, while DH bikes with 27.5" front wheels use 46mm. Provides 54mm offset to DH38 suspension forks Includes one lower crown with a straight 1.125" steerer tube pressed in Includes two upper crowns; one flat, one drop crown Comes with two rubber fork bumpers M6 x 16 clamp bolts Black Anodized Finish MPN: 19233-16

by Ohlins

—$45

Rudy XPLR Debonair shaft for repair and maintenance of Rockshox suspension.MPN: 11.4018.111.020

by RockShox

—$370

RockShox 35mm Crown/Steerer/Uppertube AssembliesCompatible with RockShox SID Select and Ultimate Models: FS-SID-SEL2-D1, FS-SID-SEL3-D1, FS-SID-UFA-D2, FS-SID-ULT2-D1, FS-SID-ULT3-D1MPN: 11.4018.090.090

by RockShox

—$42

Thru-axles engineered for a better ride! Designed and tested in the rugged conditions of Colorado, these thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look. A unique captive rotating thru-axle washer reduces friction on dropouts during installation, allowing for a precise fit and prevents damage when torquing. Whether you are looking to upgrade or replace an existing factory axle, these thru-axles will fit a wide variety of bike and fork models. Designed, machined and tested in Colorado, USA 5mm hex on both ends of the axle for easy installation and removal 7075 aluminum with hard anodized finish for extra durability Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage Axle length is compatible +/- 2mm An ideal replacement for OEM thru-axles Item Specifications Axle Diameter (mm) 12 Color Black Length 164 Overall Length (mm) 164 Rear Axle Type 12mm Thru-axle Thread Length (mm) 10 Thread Pitch 1.5 MPN: RTA-12-164-1.5

by Wheels Manufacturing

—$245

RockShox 35mm Crown/Steerer/Uppertube AssembliesMPN: 11.4018.090.022

by RockShox

—$310

RockShox Fork Compression DampersMPN: 11.4018.104.002

by RockShox

—$4.99

Top Caps for Fox suspension fork service and repair.MPN: 019-01-048

by FOX

—$68

200 Hour Service Kit for the repair and maintenance of RockShox forks. Performing yearly maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike.MPN: 00.4318.025.197

by RockShox

—$429

FOX 36 Crown/Steerer/Uppertube Assembies for service and repair.MPN: 820-12-538-KIT

by FOX

—$166

32 Grip Damper Assembly for FOX suspension fork service and repair.MPN: 820-18-099-KIT

by FOX

—$45

DebonAir+ Air Shaft Assembly for RockShox suspension forks.MPN: 11.4018.111.031

by RockShox

—$50

RockShox Seal Head AssembliesMPN: 00.4020.575.001

by RockShox

—$28.99

Top Caps for Fox suspension fork service and repair.MPN: 820-05-430-KIT

by FOX

—$325

Transform your existing RockShox Pike, Lyrik or Yari suspension fork into the ultimate trail fork. The ACS3 coil conversion kit combines small bump sensitivity, traction, and mid stroke support of a coil with the big hit performance of an air spring. By using coil springs, you can eliminate the constant maintenance required to keep your fork running optimally! Fits 2014-2017 RockShox Boost 27.5 Pike/2018-Current 27.5 and 29 Pike Includes Air Bump Stop, Spring Assembly, Lower Plunger Rod, retaining ring and travel indicator adapter Reduced friction for smoother overall fork performance Air Bump Stop cartridge technology to control the bigger hits towards the end of the travel MPN: ASY-76-RSB-160

by PUSH Industries

—$130

Make a good fork a great fork. Introducing the Luftkappe air piston kit for Fox Float forks. The Luftkappe is available for: 34 Float NA2 (2016-17) Performance & Factory Series (130mm + only - 120mm and lower need the 2018 Evol air shaft before a Luftkappe can be fitted) 34 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA (2015-17) Performance & Factory Series (max 180mm travel, min 120mm travel) Pinkbike: "The Luftkappe's change to the feel of the Lyrik was immediately noticeable on the trail. Traction was increased across chatter and the fork remained higher in its travel and more stable, improving the dynamic ride height without sacrificing the top end. My confidence soared when hitting sections with a lot of chatter and mid to large-sized hits, and the result meant more comfort and speed through such sections." Taking everything we learned with the Corset air sleeves and the Luftkappe we developed for the Pike, Yari & Lyrik, this second generation Luftkappe is a new air piston assembly for Fox's 34 NA2/Evol and 36 Evol forks. User installable and simple to set up, the Luftkappe transforms a good fork into a great fork. Softer initial stroke Larger negative air chamber Increased sag without the associated diving Coil-like initial & mid-stroke spring rate without excessive bottoming Increased sensitivity Improved mid stroke support & control Superior bump compliance and traction Reduced hand fatigue Reduces required compression damping Retains volume spacer compatibility Optional tools available for self-install What's included in the kit: 34 Evol: Upgrade low friction air piston assembly. 34 NA2: Upgrade low friction air piston assembly & upgrade low friction, low profile sealhead 36 Evol: Upgrade low friction air piston assembly. 36 NA: Upgrade low friction air piston assembly & upgrade topout spacer ring Note: If your 36 Evol tops out noticeably, you will need to replace your air shaft assembly before purchasing the Luftkappe. Fox have updated this part due to the topout issues that many of the 2018 36 Evol forks had. 34 forks do not have this issue. Relevant Fox part numbers for the new air shaft assemblies, by travel: 180mm: 820-02-534-KIT 170mm: 820-02-535-KIT 160mm: 820-02-536-KIT 150mm: 820-02-537-KIT 140mm: 820-02-538-KIT 100mm (36 831): 820-02-539-KIT If your fork does not have noticeable top-out issues, you don't need to replace the shaft before installing the Luftkappe. FAQ: 1. Can I install it myself? Yes, provided you have access to the supplies and tools listed in the installation instructions above. If you're really crafty (and EXTREMELY careful) it is possible to install the Luftkappes (all Evol variants) without the installation tools, however the risk of damaging things is much higher and we really don't recommend trying. If you choose to take this route and damage your air shaft (or anything else), we cannot be held responsible - we make the tools available for a reason. It is not possible to install the 34 NA2 Luftkappe kit without 10mm shaft clamps and the bullet tool - you'll damage the shaft AND damage the seals on the new sealhead. 2. Does it work with TALAS forks? No, sorry. 3. Does it work with versions of the 36 prior to 2015? No, sorry! 4. Does it work with 32s or 40s? No, sorry. 5. How does it actually work? It enlarges the negative air chamber to reduce the initial spring rate. This lets you run higher air pressure for more support in the middle and end of the stroke with improved sensitivity in the start of the stroke. 6. Is it compatible with MRP's Ramp Control cartridge? Generally speaking no. If you are running your fork at least 30mm shorter than its maximum available travel, then yes. 7. Shouldn't I just buy a new fork instead? Sure, they're about the same price as the Luftkappe. 8. What parts does it actually replace in the air spring? It replaces the plastic piston itself, and the rubber topout bumper in the 34s is removed but not replaced (36 topout assembly is unchanged). You reuse your air shaft, though the 34NA2 kit comes with a replacement low friction, low profile sealhead comparable in size to the stock 2018 Evol sealhead. This is also why the NA2 kit is more expensive than the other two - it's basically a 2018 Factory update on top of a Luftkappe. 9. Who is this NOT suited for? The Luftkappe is outright superior to the stock air spring for nearly everyone, however there are a few cases where it might not be for you: - If you run your 36 at 180mm, it will be quite progressive. You may like it, but you may also find it hard to use the last 5-10mm of travel - if this would bother you then have a think about it first. At 170mm and below it will be fine. - If you like running really low sag for some reason. The Luftkappe runs more sag than the stock fork, but is firmer in the mid stroke - similar to a coil fork, but with ending-stroke ramp up to prevent harsh bottoming. If you're the kind of person who wants the fork to run 5% sag, this isn't for you. We could point out that a setup like that probably just means your handlebars are set too low and you're compensating with oversprung suspension, but we aren't here to judge you, so maybe just don't buy it. - If you're anal about your fork having an exact (but rounded-to-the-nearest-10mm) amount of travel. Because the Luftkappe balances forces at a pneumatic topout, the force right around topout is very low (literally zero other than friction), meaning the weight of the bike alone will cause it to sag a few millimetres. Your car's suspension sags under the vehicle's own weight, so should your bike - unless it was so sticky, overly stiff or over-preloaded that 10kg of bike weight wasn't enough to cause your suspension to move at all, of course. If only having an apparent 148mm out of a 150mm fork is a big deal for you, stick with the stock fork. (in)Compatibility Information: Luftkappe IS available for: 34 Float NA2 (Performance, Performance Elite and Factory Series, 2016-17), 130mm and higher travel 34 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA1 (NA) Not compatible with: Rhythm-series forks E-bike specific forks Non-Evol (pre-2018) 36 forks 34mm forks for 29" wheels with 150mm or more travel Pre-2016 34 forks Pre-2016 34 forks that were later updated with the factory NA air system update Any TALAS forks Any 32mm forks Any 40mm forksMPN: VS-34-NA2EVOL-18-19-NT

by Vorsprung

—$135

Make a good fork a great fork. Introducing the Luftkappe air piston kit for Fox Float forks. The Luftkappe is available for: 34 Float NA2 (2016-17) Performance & Factory Series (130mm + only - 120mm and lower need the 2018 Evol air shaft before a Luftkappe can be fitted) 34 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA (2015-17) Performance & Factory Series (max 180mm travel, min 120mm travel) Pinkbike: "The Luftkappe's change to the feel of the Lyrik was immediately noticeable on the trail. Traction was increased across chatter and the fork remained higher in its travel and more stable, improving the dynamic ride height without sacrificing the top end. My confidence soared when hitting sections with a lot of chatter and mid to large-sized hits, and the result meant more comfort and speed through such sections." Taking everything we learned with the Corset air sleeves and the Luftkappe we developed for the Pike, Yari & Lyrik, this second generation Luftkappe is a new air piston assembly for Fox's 34 NA2/Evol and 36 Evol forks. User installable and simple to set up, the Luftkappe transforms a good fork into a great fork. Softer initial stroke Larger negative air chamber Increased sag without the associated diving Coil-like initial & mid-stroke spring rate without excessive bottoming Increased sensitivity Improved mid stroke support & control Superior bump compliance and traction Reduced hand fatigue Reduces required compression damping Retains volume spacer compatibility Optional tools available for self-install What's included in the kit: 34 Evol: Upgrade low friction air piston assembly. 34 NA2: Upgrade low friction air piston assembly & upgrade low friction, low profile sealhead 36 Evol: Upgrade low friction air piston assembly. 36 NA: Upgrade low friction air piston assembly & upgrade topout spacer ring Note: If your 36 Evol tops out noticeably, you will need to replace your air shaft assembly before purchasing the Luftkappe. Fox have updated this part due to the topout issues that many of the 2018 36 Evol forks had. 34 forks do not have this issue. Relevant Fox part numbers for the new air shaft assemblies, by travel: 180mm: 820-02-534-KIT 170mm: 820-02-535-KIT 160mm: 820-02-536-KIT 150mm: 820-02-537-KIT 140mm: 820-02-538-KIT 100mm (36 831): 820-02-539-KIT If your fork does not have noticeable top-out issues, you don't need to replace the shaft before installing the Luftkappe. FAQ: 1. Can I install it myself? Yes, provided you have access to the supplies and tools listed in the installation instructions above. If you're really crafty (and EXTREMELY careful) it is possible to install the Luftkappes (all Evol variants) without the installation tools, however the risk of damaging things is much higher and we really don't recommend trying. If you choose to take this route and damage your air shaft (or anything else), we cannot be held responsible - we make the tools available for a reason. It is not possible to install the 34 NA2 Luftkappe kit without 10mm shaft clamps and the bullet tool - you'll damage the shaft AND damage the seals on the new sealhead. 2. Does it work with TALAS forks? No, sorry. 3. Does it work with versions of the 36 prior to 2015? No, sorry! 4. Does it work with 32s or 40s? No, sorry. 5. How does it actually work? It enlarges the negative air chamber to reduce the initial spring rate. This lets you run higher air pressure for more support in the middle and end of the stroke with improved sensitivity in the start of the stroke. 6. Is it compatible with MRP's Ramp Control cartridge? Generally speaking no. If you are running your fork at least 30mm shorter than its maximum available travel, then yes. 7. Shouldn't I just buy a new fork instead? Sure, they're about the same price as the Luftkappe. 8. What parts does it actually replace in the air spring? It replaces the plastic piston itself, and the rubber topout bumper in the 34s is removed but not replaced (36 topout assembly is unchanged). You reuse your air shaft, though the 34NA2 kit comes with a replacement low friction, low profile sealhead comparable in size to the stock 2018 Evol sealhead. This is also why the NA2 kit is more expensive than the other two - it's basically a 2018 Factory update on top of a Luftkappe. 9. Who is this NOT suited for? The Luftkappe is outright superior to the stock air spring for nearly everyone, however there are a few cases where it might not be for you: - If you run your 36 at 180mm, it will be quite progressive. You may like it, but you may also find it hard to use the last 5-10mm of travel - if this would bother you then have a think about it first. At 170mm and below it will be fine. - If you like running really low sag for some reason. The Luftkappe runs more sag than the stock fork, but is firmer in the mid stroke - similar to a coil fork, but with ending-stroke ramp up to prevent harsh bottoming. If you're the kind of person who wants the fork to run 5% sag, this isn't for you. We could point out that a setup like that probably just means your handlebars are set too low and you're compensating with oversprung suspension, but we aren't here to judge you, so maybe just don't buy it. - If you're anal about your fork having an exact (but rounded-to-the-nearest-10mm) amount of travel. Because the Luftkappe balances forces at a pneumatic topout, the force right around topout is very low (literally zero other than friction), meaning the weight of the bike alone will cause it to sag a few millimetres. Your car's suspension sags under the vehicle's own weight, so should your bike - unless it was so sticky, overly stiff or over-preloaded that 10kg of bike weight wasn't enough to cause your suspension to move at all, of course. If only having an apparent 148mm out of a 150mm fork is a big deal for you, stick with the stock fork. (in)Compatibility Information: Luftkappe IS available for: 34 Float NA2 (Performance, Performance Elite and Factory Series, 2016-17), 130mm and higher travel 34 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA1 (NA) Not compatible with: Rhythm-series forks E-bike specific forks Non-Evol (pre-2018) 36 forks 34mm forks for 29" wheels with 150mm or more travel Pre-2016 34 forks Pre-2016 34 forks that were later updated with the factory NA air system update Any TALAS forks Any 32mm forks Any 40mm forksMPN: VS-36-NA-15-17-NT

by Vorsprung