Fork Parts / Service

—$50

RockShox Motion Control Compression Dampers RockShox Motion Control Compression Damper Damper, Compression UPC: 710845870064

by RockShox

—$60

200 Hour Service Kit for the repair and maintenance of RockShox forks. Performing yearly maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. RockShox 200 Hour Fork Service Kit Service Kit UPC: 710845869891

by RockShox

—$115

The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. Includes air shaft assembly, ButterCup & seal head Can be used to change travel Compatible with ZEB A1+ models:FS-ZEB-R-A1, FS-ZEB-SEL-A1, FS-ZEB-SEL-A2, FS-ZEB-UFA-A3, FS-ZEB-ULT-A1, FS-ZEB-ULT-A2, FS-ZEB-ULT-A4 RockShox DebonAir+ Air Spring Assembly Upgrade Air Springs & Parts UPC: 710845877612

by RockShox

—$39.95

The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. Designed and manufactured in Minneapolis, MN USA 7075 T6 Aluminum Item Specifications Axle Diameter (mm) 15 Color Purple Over Locknut (mm) 110 Overall Length (mm) 125 Thread Length (mm) 12 Thread Pitch 1.5 Weight 53 Wolf Tooth Front Thru Axles Thru Axle UPC: 812719029001

by Wolf Tooth

—$137

38 Air Shaft Assembly for Fox suspension forks. FOX 38 Air Shaft Assembly Air Springs & Parts UPC: 821973387369

by FOX

—$325

Transform your existing RockShox Pike, Lyrik or Yari suspension fork into the ultimate trail fork. The ACS3 coil conversion kit combines small bump sensitivity, traction, and mid stroke support of a coil with the big hit performance of an air spring. By using coil springs, you can eliminate the constant maintenance required to keep your fork running optimally! Fits 2016-Current RockShox Yari and Lyrik Includes Air Bump Stop, Spring Assembly, Lower Plunger Rod, retaining ring and travel indicator adapter Reduced friction for smoother overall fork performance Air Bump Stop cartridge technology to control the bigger hits towards the end of the travel PUSH Industries ACS3 Coil Component Kit RockShox Coil Springs & Parts UPC: 840031600073

by PUSH Industries

—$115

Make a good fork a great fork. Introducing the Luftkappe air piston kit for Fox Float forks. The Luftkappe is available for: 34 Float NA2 (2016-17) Performance & Factory Series (130mm + only - 120mm and lower need the 2018 Evol air shaft before a Luftkappe can be fitted) 34 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA (2015-17) Performance & Factory Series (max 180mm travel, min 120mm travel) Pinkbike: "The Luftkappe's change to the feel of the Lyrik was immediately noticeable on the trail. Traction was increased across chatter and the fork remained higher in its travel and more stable, improving the dynamic ride height without sacrificing the top end. My confidence soared when hitting sections with a lot of chatter and mid to large-sized hits, and the result meant more comfort and speed through such sections." Taking everything we learned with the Corset air sleeves and the Luftkappe we developed for the Pike, Yari & Lyrik, this second generation Luftkappe is a new air piston assembly for Fox's 34 NA2/Evol and 36 Evol forks. User installable and simple to set up, the Luftkappe transforms a good fork into a great fork. Softer initial stroke Larger negative air chamber Increased sag without the associated diving Coil-like initial & mid-stroke spring rate without excessive bottoming Increased sensitivity Improved mid stroke support & control Superior bump compliance and traction Reduced hand fatigue Reduces required compression damping Retains volume spacer compatibility Optional tools available for self-install What's included in the kit: 34 Evol: Upgrade low friction air piston assembly. 34 NA2: Upgrade low friction air piston assembly & upgrade low friction, low profile sealhead 36 Evol: Upgrade low friction air piston assembly. 36 NA: Upgrade low friction air piston assembly & upgrade topout spacer ring Note: If your 36 Evol tops out noticeably, you will need to replace your air shaft assembly before purchasing the Luftkappe. Fox have updated this part due to the topout issues that many of the 2018 36 Evol forks had. 34 forks do not have this issue. Relevant Fox part numbers for the new air shaft assemblies, by travel: 180mm: 820-02-534-KIT 170mm: 820-02-535-KIT 160mm: 820-02-536-KIT 150mm: 820-02-537-KIT 140mm: 820-02-538-KIT 100mm (36 831): 820-02-539-KIT If your fork does not have noticeable top-out issues, you don't need to replace the shaft before installing the Luftkappe. FAQ: 1. Can I install it myself? Yes, provided you have access to the supplies and tools listed in the installation instructions above. If you're really crafty (and EXTREMELY careful) it is possible to install the Luftkappes (all Evol variants) without the installation tools, however the risk of damaging things is much higher and we really don't recommend trying. If you choose to take this route and damage your air shaft (or anything else), we cannot be held responsible - we make the tools available for a reason. It is not possible to install the 34 NA2 Luftkappe kit without 10mm shaft clamps and the bullet tool - you'll damage the shaft AND damage the seals on the new sealhead. 2. Does it work with TALAS forks? No, sorry. 3. Does it work with versions of the 36 prior to 2015? No, sorry! 4. Does it work with 32s or 40s? No, sorry. 5. How does it actually work? It enlarges the negative air chamber to reduce the initial spring rate. This lets you run higher air pressure for more support in the middle and end of the stroke with improved sensitivity in the start of the stroke. 6. Is it compatible with MRP's Ramp Control cartridge? Generally speaking no. If you are running your fork at least 30mm shorter than its maximum available travel, then yes. 7. Shouldn't I just buy a new fork instead? Sure, they're about the same price as the Luftkappe. 8. What parts does it actually replace in the air spring? It replaces the plastic piston itself, and the rubber topout bumper in the 34s is removed but not replaced (36 topout assembly is unchanged). You reuse your air shaft, though the 34NA2 kit comes with a replacement low friction, low profile sealhead comparable in size to the stock 2018 Evol sealhead. This is also why the NA2 kit is more expensive than the other two - it's basically a 2018 Factory update on top of a Luftkappe. 9. Who is this NOT suited for? The Luftkappe is outright superior to the stock air spring for nearly everyone, however there are a few cases where it might not be for you: - If you run your 36 at 180mm, it will be quite progressive. You may like it, but you may also find it hard to use the last 5-10mm of travel - if this would bother you then have a think about it first. At 170mm and below it will be fine. - If you like running really low sag for some reason. The Luftkappe runs more sag than the stock fork, but is firmer in the mid stroke - similar to a coil fork, but with ending-stroke ramp up to prevent harsh bottoming. If you're the kind of person who wants the fork to run 5% sag, this isn't for you. We could point out that a setup like that probably just means your handlebars are set too low and you're compensating with oversprung suspension, but we aren't here to judge you, so maybe just don't buy it. - If you're anal about your fork having an exact (but rounded-to-the-nearest-10mm) amount of travel. Because the Luftkappe balances forces at a pneumatic topout, the force right around topout is very low (literally zero other than friction), meaning the weight of the bike alone will cause it to sag a few millimetres. Your car's suspension sags under the vehicle's own weight, so should your bike - unless it was so sticky, overly stiff or over-preloaded that 10kg of bike weight wasn't enough to cause your suspension to move at all, of course. If only having an apparent 148mm out of a 150mm fork is a big deal for you, stick with the stock fork. (in)Compatibility Information: Luftkappe IS available for: 34 Float NA2 (Performance, Performance Elite and Factory Series, 2016-17), 130mm and higher travel 34 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA1 (NA) Not compatible with: Rhythm-series forks E-bike specific forks Non-Evol (pre-2018) 36 forks 34mm forks for 29" wheels with 150mm or more travel Pre-2016 34 forks Pre-2016 34 forks that were later updated with the factory NA air system update Any TALAS forks Any 32mm forks Any 40mm forks Vorsprung Luftkappe Air Springs & Parts

by Vorsprung

—$105

Push Industries Complete Lower Leg Service Kit   We understand that sometimes finding all of the right supplies for servicing your fork can be difficult, but not anymore! This Lower Leg Service Kits include the same premium parts, fluids, and tools used by our professional staff here at PUSH.    Kit Includes PUSH ULF Fork Seals PUSH High Absorbency Foam Rings PUSH Crush Washers PUSH Fork Seal Installation Tool PUSH SOS-Assembly Lube, 1 oz jar Maxima PLUSH 10wt Lower Leg Fluid, 16 floz bottle 60cc Syringe PUSH Industries Lower Leg Service Kit

by PUSH Industries

—$20

RockShox Basic Service Kits include dust seals, foam rings, o-ring seals Item Specifications Fits Argyle RockShox Fork Basic Service Kits Service Kit UPC: 710845684487

by RockShox

—$39.50

Thru-axles engineered for a better ride! Designed and tested in the rugged conditions of Colorado, these thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look. A unique captive rotating thru-axle washer reduces friction on dropouts during installation, allowing for a precise fit and prevents damage when torquing. Whether you are looking to upgrade or replace an existing factory axle, these thru-axles will fit a wide variety of bike and fork models. Designed, machined and tested in Colorado, USA 5mm hex on both ends of the axle for easy installation and removal 7075 aluminum with hard anodized finish for extra durability Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage Axle length is compatible +/- 2mm An ideal replacement for OEM thru-axles Item Specifications Axle Diameter (mm) 12 Color Black Length 172 Overall Length (mm) 172 Rear Axle Type 12mm Thru-axle Thread Length (mm) 18 Thread Pitch 1.5 Wheels Manufacturing Rear Thru Axle Thru Axle UPC: 811079029430

by Wheels Manufacturing

—$39.95

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it.Made in Minnesota to aerospace standards Item Specifications Axle Diameter (mm) 12 Color Black Overall Length (mm) 159 Thread Length (mm) 12 Thread Pitch 1.0 Weight 42 Wolf Tooth Rear Thru Axle Thru Axle UPC: 810006801620

by Wolf Tooth

—$68

32 Step-Cast Air Shaft Assembly FOX 32 Step-Cast Air Shaft Assembly Air Springs & Parts UPC: 611056146606

by FOX

—$140

Make a good fork a great fork. Introducing the Luftkappe air piston kit for Fox Float forks. The Luftkappe is available for: 34 Float NA2 (2016-17) Performance & Factory Series (130mm + only - 120mm and lower need the 2018 Evol air shaft before a Luftkappe can be fitted) 34 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA (2015-17) Performance & Factory Series (max 180mm travel, min 120mm travel) Pinkbike: "The Luftkappe's change to the feel of the Lyrik was immediately noticeable on the trail. Traction was increased across chatter and the fork remained higher in its travel and more stable, improving the dynamic ride height without sacrificing the top end. My confidence soared when hitting sections with a lot of chatter and mid to large-sized hits, and the result meant more comfort and speed through such sections." Taking everything we learned with the Corset air sleeves and the Luftkappe we developed for the Pike, Yari & Lyrik, this second generation Luftkappe is a new air piston assembly for Fox's 34 NA2/Evol and 36 Evol forks. User installable and simple to set up, the Luftkappe transforms a good fork into a great fork. Softer initial stroke Larger negative air chamber Increased sag without the associated diving Coil-like initial & mid-stroke spring rate without excessive bottoming Increased sensitivity Improved mid stroke support & control Superior bump compliance and traction Reduced hand fatigue Reduces required compression damping Retains volume spacer compatibility Optional tools available for self-install What's included in the kit: 34 Evol: Upgrade low friction air piston assembly. 34 NA2: Upgrade low friction air piston assembly & upgrade low friction, low profile sealhead 36 Evol: Upgrade low friction air piston assembly. 36 NA: Upgrade low friction air piston assembly & upgrade topout spacer ring Note: If your 36 Evol tops out noticeably, you will need to replace your air shaft assembly before purchasing the Luftkappe. Fox have updated this part due to the topout issues that many of the 2018 36 Evol forks had. 34 forks do not have this issue. Relevant Fox part numbers for the new air shaft assemblies, by travel: 180mm: 820-02-534-KIT 170mm: 820-02-535-KIT 160mm: 820-02-536-KIT 150mm: 820-02-537-KIT 140mm: 820-02-538-KIT 100mm (36 831): 820-02-539-KIT If your fork does not have noticeable top-out issues, you don't need to replace the shaft before installing the Luftkappe. FAQ: 1. Can I install it myself? Yes, provided you have access to the supplies and tools listed in the installation instructions above. If you're really crafty (and EXTREMELY careful) it is possible to install the Luftkappes (all Evol variants) without the installation tools, however the risk of damaging things is much higher and we really don't recommend trying. If you choose to take this route and damage your air shaft (or anything else), we cannot be held responsible - we make the tools available for a reason. It is not possible to install the 34 NA2 Luftkappe kit without 10mm shaft clamps and the bullet tool - you'll damage the shaft AND damage the seals on the new sealhead. 2. Does it work with TALAS forks? No, sorry. 3. Does it work with versions of the 36 prior to 2015? No, sorry! 4. Does it work with 32s or 40s? No, sorry. 5. How does it actually work? It enlarges the negative air chamber to reduce the initial spring rate. This lets you run higher air pressure for more support in the middle and end of the stroke with improved sensitivity in the start of the stroke. 6. Is it compatible with MRP's Ramp Control cartridge? Generally speaking no. If you are running your fork at least 30mm shorter than its maximum available travel, then yes. 7. Shouldn't I just buy a new fork instead? Sure, they're about the same price as the Luftkappe. 8. What parts does it actually replace in the air spring? It replaces the plastic piston itself, and the rubber topout bumper in the 34s is removed but not replaced (36 topout assembly is unchanged). You reuse your air shaft, though the 34NA2 kit comes with a replacement low friction, low profile sealhead comparable in size to the stock 2018 Evol sealhead. This is also why the NA2 kit is more expensive than the other two - it's basically a 2018 Factory update on top of a Luftkappe. 9. Who is this NOT suited for? The Luftkappe is outright superior to the stock air spring for nearly everyone, however there are a few cases where it might not be for you: - If you run your 36 at 180mm, it will be quite progressive. You may like it, but you may also find it hard to use the last 5-10mm of travel - if this would bother you then have a think about it first. At 170mm and below it will be fine. - If you like running really low sag for some reason. The Luftkappe runs more sag than the stock fork, but is firmer in the mid stroke - similar to a coil fork, but with ending-stroke ramp up to prevent harsh bottoming. If you're the kind of person who wants the fork to run 5% sag, this isn't for you. We could point out that a setup like that probably just means your handlebars are set too low and you're compensating with oversprung suspension, but we aren't here to judge you, so maybe just don't buy it. - If you're anal about your fork having an exact (but rounded-to-the-nearest-10mm) amount of travel. Because the Luftkappe balances forces at a pneumatic topout, the force right around topout is very low (literally zero other than friction), meaning the weight of the bike alone will cause it to sag a few millimetres. Your car's suspension sags under the vehicle's own weight, so should your bike - unless it was so sticky, overly stiff or over-preloaded that 10kg of bike weight wasn't enough to cause your suspension to move at all, of course. If only having an apparent 148mm out of a 150mm fork is a big deal for you, stick with the stock fork. (in)Compatibility Information: Luftkappe IS available for: 34 Float NA2 (Performance, Performance Elite and Factory Series, 2016-17), 130mm and higher travel 34 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA1 (NA) Not compatible with: Rhythm-series forks E-bike specific forks Non-Evol (pre-2018) 36 forks 34mm forks for 29" wheels with 150mm or more travel Pre-2016 34 forks Pre-2016 34 forks that were later updated with the factory NA air system update Any TALAS forks Any 32mm forks Any 40mm forks Vorsprung Luftkappe Air Springs & Parts

by Vorsprung

—$50

RockShox Service Kits Item Specifications Fits 32mm SID RockShox Service Kits Service Kit UPC: 710845608346

by RockShox

—$25

RockShox Adjuster Knobs & External Hardware RockShox Bumpers Adjuster Knob & External Hardware UPC: 710845620195

by RockShox

—$60

RockShox Lever Assemblies17mm cable pull, not compatible with 2013+ Motion Control RockShox PopLoc Lever Remotes & Parts UPC: 710845304439

by RockShox

—$20

RockShox Basic Service Kits provide replacement dust seals, foam rings, o-ring seals, etc. for regular maintenance intervals. Kit includes: dust seals, foam rings, o-ring seals Helps maintain proper fork function RockShox Fork Basic Service Kits Service Kit UPC: 710845782336

by RockShox

—$200

RockShox 35mm Crown/Steerer/Uppertube Assemblies RockShox 35mm Crown/Steerer/Upper Tube Assembly Crown/Steerer/Uppertube Assembly UPC: 710845753541

by RockShox

—$130

It's tough to find space for a remote that looks good and gives the rider full control. The TwistLoc remote makes it easy to control your suspension while on the go. Twist back to lock, twist forward to release - on forks, rear shocks, or both in tandem. With a consistent grip size and light-touch action, the TwistLoc maximizes efficiency while keeping your hand safely on the bar. RockShox TwistLoc Remote and Grip Set Remote Upgrade Kits UPC: 710845895067

by RockShox

—$35

Replacement rebound knobs for RockShox forks. RockShox Rebound Knob Adjuster Knob & External Hardware UPC: 710845877841

by RockShox

—$26

Service your suspension fork with the Enduro HyGlide Fork Seal Kit. HyGlide seals utilize the material and design advantages of our two-part seals (Polyurethane wipers and Moly-Disulphide-infused oil seals) and combine them into a single wiper/oil seal. This unique design joins the oil seal and wiper into a single unit, creating a sealing system that eliminates one of the sealing lips and decreases seal friction or "stiction" by 25%. The cold-fused integrated seal design also features a large oil cavity between the two sealing lips to prevent contamination and further ease fork's movement. This seal kit includes HyGlide integrated upper wiper/lower oil seal, foam rings and crush washers for Fox 32mm suspension forks HyGlide seal superior sealing action and can increase fork service intervals by as much as 2 or 3 times compared to OE recommendations Enduro HyGlide Fork Seals Seal Kit UPC: 811780024588

by Enduro

—$378

34 Grip Damper Assembly for Fox suspension forks. FOX Grip / Grip 2 Damper Assemblies Damper, Compression UPC: 821973397450

by FOX

—$85

The tool-free Maxle Ultimate Rear brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system. Overall length: 167 Thread length: 20mm Thread pitch: M12x1.75 Item Specifications Axle Diameter (mm) 12 Color Black Over Locknut (mm) 135 Overall Length (mm) 167 Thread Length (mm) 20 Thread Pitch 1.75 Weight 76 RockShox Maxle Ultimate Rear Thru Axle Thru Axle UPC: 710845768101

by RockShox

—$25

Replacement compression knobs for RockShox suspension forks. RockShox Compression Knob Adjuster Knob & External Hardware UPC: 710845739941

by RockShox

—$35.99

Seal kits for servicing Manitou suspension forks. Manitou Seal Kits Seal Kit UPC: 844171018644

by Manitou

—$45

RockShox Basic Service Kits include dust seals, foam rings, o-ring seals Item Specifications Fits Pike RockShox Fork Basic Service Kits Service Kit UPC: 710845716737

by RockShox

—$35

RockShox Service Kits include o-rings, glide rings, air valve caps, air valves, c-clips, bottom out bumpers, crush washer, etc. Kits include many extra parts to cover all years and models. Item Specifications Fits Sektor/Argyle RockShox Service Kits Service Kit UPC: 710845652875

by RockShox

—$21.59

RockShox Basic Service Kits include dust seals, foam rings, o-ring seals Item Specifications Fits Revelation RockShox Fork Basic Service Kits Service Kit UPC: 710845729607

by RockShox

—$20

RockShox Basic Service Kits provide replacement dust seals, foam rings, o-ring seals, etc. for regular maintenance intervals. Kit includes: dust seals, foam rings, o-ring seals Helps maintain proper fork function RockShox Fork Basic Service Kits Service Kit UPC: 710845798443

by RockShox

—$190

RockShox XLoc Parts RockShox Xloc Parts Remotes & Parts UPC: 710845741777

by RockShox

—$43

RockShox Bluto Air Shaft RockShox Bluto Air Shaft Air Springs & Parts UPC: 710845752650

by RockShox

—$55

200 Hour Service Kit for the repair and maintenance of RockShox forks. Performing yearly maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. RockShox recommended 200hr/1 Year service kit for SID SL (32mm) RL / RLC / XX / Select / Select+ / Ultimate (2017-2020) Generation-B suspension forks Compatible with RockShox FS-SID-RL-B1, FS-SID-RL-B2, FS-SID-RL-B3, FS-SID-RLC-A1, FS-SID-RLC-A2, FS-SID-RLC-B1, FS-SID-SEL-B4, FS-SID-ULT-B4, FS-SID-ULTC-B4, FS-SID-WC-B1, FS-SID-WC-B2, FS-SID-WC-B3, FS-SID-XX-B1 RockShox 200 Hour Fork Service Kit Service Kit UPC: 710845902338

by RockShox

—$25

RockShox Charger Damper Parts for repair and maintenance of Rockshox suspension. RockShox Charger Damper Damper, Compression UPC: 710845838415

by RockShox

—$30

The replacement 18t idler pulley wheel, compatible with both the Claymore and Highlander frames. If you have a Claymore or Highlander it's a great idea to have a spare pulley wheel. Compatible with Deviate Claymore & Highlander Frames Machined aluminum body anodized black Deviate Cycles Deviate Idler Wheel Suspension Part

by Deviate Cycles

—$50

DebonAir+ Air Shaft Assembly for RockShox suspension forks. RockShox DebonAir+ Air Shaft Assembly Upgrade Air Springs & Parts UPC: 710845879258

by RockShox

—$159.95

Ramp control adds speed sensitive ending stroke/bottom out adjustability to forks. At high shaft speeds, the cartridge it mimics the addition of volume reducing spacers in the fork. At low shaft speeds it allows the fork to be more active. Total tuning range (strictly in terms of ending-stroke support) is roughly equivalent to 1-4 volume spacers. Thus fully open, the Ramp Control cartridge reduces spring volume similar to one volume spacer. In its strongest setting, and under a high-speed compression, the ending-stroke support will be similar to a spring with its volume reduced by four standard spacers. Fits 2021 and newer 160-180mm Travel 38 Float NA2 Forks with FIT 4, RC2 and GRIP dampers Easy installation with no lower-leg removal Will Not Work on TALAS equipped fork Adds speed-sensitive ending-stroke control and bottom-out force adjustability Isolate and tune bottom-out with minimal changes to initial and mid-stroke Easily change tune for different trails without tools MRP Ramp Control Cartridge Air Springs & Parts UPC: 702430185639

by MRP

—$150

This control and shock link set allows you to convert the suspension travel of a Blackthorn 1.0 frame to the 165 mm rear travel found on Cassidy 1.0. Also acts as a replacement for existing Cassidy 1.0 Control or Shock Link Fits 2020 2024 Blackthorn and Blackthorn C 1.0, and Cassidy and Cassidy C 1.0; will NOT fit 2025+ Blackthorn C 125 or Blackthorn C 145 Use ONLY with 230 x 62.5 air shock Best paired with a 170-180mm suspension fork Please consult the Split Pivot+ instructions for complete conversion requirements and steps Salsa Cassidy 1.0 Control and Shock Link Suspension Part UPC: 657993282625

by Salsa

—$179.95

Ramp Control Pro Model B for Rock Shox Pike 15x110 Boost 2015-2016/Pike 2017-2019/Lyrik/ Yari 2015- 2019 Adds speed-sensitive ending-stroke control and bottom-out force adjustability to compatible forks Isolate and tune bottom-out with minimal changes to initial and mid-stroke Easy installation requires little time and few tools - no lower-leg removal required MRP Ramp Control Pro Air Springs & Parts UPC: 702430182294

by MRP

—$31.99

Seal kits for servicing Manitou suspension forks. Manitou Seal Kits Seal Kit UPC: 844171038079

by Manitou

—$25

Replacement rebound knobs for RockShox forks. RockShox Rebound Knob Adjuster Knob & External Hardware UPC: 710845625794

by RockShox

—$415

35mm / 29" / Boost Lower Leg Assembly RockShox 35mm / 29" / Boost Lowers & Bushing Sets UPC: 710845817557

by RockShox

—$24.99

RockShox Service Kits include o-rings, glide rings, air valve caps, air valves, c-clips, bottom out bumpers, crush washer, etc. Kits include many extra parts to cover all years and models. Item Specifications Fits Tora TK RockShox Service Kits Service Kit UPC: 710845650413

by RockShox

—$20

Refresh your fork with a color matching decal kit. Available in various colors and styles to fit different models and sizes.RockShox decal kits are carefully constructed with Fresh Clean Sticker technology to keep them looking their best RockShox Fork Decal Kits Other Fork Part UPC: 710845803765

by RockShox

—$30

Revelation Air Shaft for repair and maintenance of Rockshox suspension.can be used to change travel to 100mm On 26"/27.5"/29" Solo Air, not compatible with Dual Air RockShox Revelation Air Shaft Air Springs & Parts UPC: 710845724220

by RockShox

—$85

RockShox Full Service Kits for service and repairs. RockShox Full Service Kits Service Kit UPC: 710845754456

by RockShox

—$75

200 Hour Service Kit for the repair and maintenance of RockShox forks. Performing yearly maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. RockShox recommended 200hr/1 Year service kit for Pike Base / Select / Select+ / Ultimate (2022+) Generation-C suspension forks Compatible with RockShox FS-PIKE-SEL-C1, FS-PIKE-UFA-C2, FS-PIKE-ULT-C1, FS-PIKE-ULT-C2 RockShox 200 Hour Fork Service Kit Service Kit UPC: 710845903359

by RockShox

—$68

34 Air Shaft Assembly FOX 34 Air Shaft Assembly Air Springs & Parts UPC: 821973422497

by FOX

—$22.37

Replacement parts for Fox suspension forks. FOX Bottom Stud Interface Other Fork Part UPC: 611056147122

by FOX

—$6.99

Top Caps for Fox suspension fork service and repair. FOX Top Caps Adjuster Knob & External Hardware UPC: 611056171202

by FOX

—$18.09

Replacement rebound knobs for RockShox forks.Includes adjuster knob and bolt RockShox Rebound Knob Adjuster Knob & External Hardware UPC: 710845806391

by RockShox