- Shop
- Bikes / Frames
-
Components
- Tires / Tubes / Sealant / Valves
- Forks / Parts
- Rear Shocks / Parts
- Groupsets / Drivetrain Bundles
- Drivetrain
- Shifters
- Handlebars / Grips
- Stems
- Brakes / Pads / Adaptors
- Seatposts / Clamps / Levers
- Saddles / Seats
- Pedals / Cleats / Parts
- Wheels / Hubs / Rims
- Headsets / Parts
- Cables / Housing
-
Accessories
- Tools / Lube / Solvents
- Car / Truck Racks / Tailgate Pads
- Frame Straps
- Pumps / Inflation
- Chainstay / Frame Protectors / Fenders
- Computers / GPS / Electronics
- Hydration Packs / Bags
- Lights
- Water Bottles / Cages
- Gift Ideas / Novelties
- Indoor Trainers
- Bike Travel / Shipping Cases
- Nutritionals
- Locks
- Storage Racks / Stands
-
Apparel
- Helmets
- Jerseys
- Shorts / Bibs
- Gloves
- Shoes / Socks
- Pads / Protective Gear
- Pants
- Eyewear
- Chamois / Short Liners / Base Layer
- Chamois Creams / Embrocations / Butt'r
- Jackets / Vests / Hoodies / Flannels
- Casual Wear
- Headwear
- Brands
- Top Secret Sales (Do Not Tell!)
- Watch
- Read
- My Account
- Help / FAQ's
- Contact Us / Locations
- Call Us | 1-805-375-4525
- Why Shop With Us?
- About Us
- Continue Shopping
- Your Cart is Empty
Headset Parts
Showing 61 products
-
Cane Creek 110-Series Alloy 52/40 1.5" Crown Race
—$18.75
Cane Creek Crown Races Compatible across 10, 40 and 110 Series headsets and backwards compatible with S and XX Series All crown races feature integral molded seals Cane Creek Crown Races Crown Race UPC: 840226076959
Mpn: BAA0173Aby Cane Creek
-
Cane Creek ZN40 Series Bearing Kit 36 x 45, 41/52mm
—$34.99
ZN40-Series bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of your headset.Compatible with 110-, 40-, and 10-Series headsets Item Specifications Bearing I.D. (mm) 41 Bearing O.D. (mm) 52 Bearing Type Cartridge Cartridge Bearing Angle 36x45 Thickness 6.5 Cane Creek ZN40-Series Bearing Headset Bearing UPC: 840226078441
Mpn: BAA1172by Cane Creek
-
Cane Creek 40-Series Steel 52/40 1.5" Crown Race
—$14.94
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 52mm lower headset bearings Compatible with 40mm (1-1/2") tapered steerer tubes Durable steel construction Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series Integral mold seals keep out the elements Item Specifications Crown Race 40 Cane Creek Crown Races Crown Race UPC: 840226076690
Mpn: BAA0010Sby Cane Creek
-
Cane Creek 40-Series Steel 52/30 Conversion Crown Race 1.5" to 1-1/8"
—$14.94
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 52mm lower headset bearings Compatible with 30mm (1-1/8") straight steerer tubes Durable steel construction Allows the installation of a straight steerer fork without changing out the headset lower 36x45 Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series Integral mold seals keep out the elements Cane Creek Crown Races Crown Race UPC: 840226076676
Mpn: BAA0009Sby Cane Creek
-
Cane Creek 40-Series ZS Short Top Subassembly ZS44/28.6 Black
—$17.27
Cane Creek Headset Top Sub AssembliesStack height =8mm Cane Creek Top Covers Headset Small Part UPC: 840226077598
Mpn: BAA0726Kby Cane Creek
-
Cane Creek ZN40-Bearing 52mm Zinc Plated, Each
—$20.15
ZN40-Series bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of your headset.Compatible with 110-, 40-, and 10-Series headsets Item Specifications Bearing I.D. (mm) 40.1 Bearing O.D. (mm) 52 Bearing Type Cartridge Cartridge Bearing Angle 36x45 Thickness 6.5 Cane Creek ZN40-Series Bearing Headset Bearing UPC: 840226078328
Mpn: BAA1132by Cane Creek
-
ENVE Composites Compression Plug, 1 1/8"
—$30
ENVE Composites Compression PlugsCarbon top cap compatible with steerer tube inner diameter of 23.2 mm Item Specifications Color Black ENVE Composites Compression Plugs Compression Plug UPC: 851705006046
Mpn: 200-0000-001by ENVE Composites
-
Cane Creek Hellbender Bearing, 41mm SHIS
—$34.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets. Item Specifications Bearing I.D. (mm) 30.3 Bearing O.D. (mm) 41 Bearing Type Cartridge Cartridge Bearing Angle 36x45 Thickness 6.5 Cane Creek Hellbender Headset Bearing Headset Bearing UPC: 840226078137
Mpn: BAA1054by Cane Creek
-
Cane Creek Hellbender Bearing, 52mm SHIS
—$57.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets. Item Specifications Bearing I.D. (mm) 40.1 Bearing O.D. (mm) 52 Bearing Type Cartridge Cartridge Bearing Angle 36x45 Thickness 6.5 Cane Creek Hellbender Headset Bearing Headset Bearing UPC: 840226078144
Mpn: BAA1055by Cane Creek
-
Cane Creek ZN40-Bearing 41mm Zinc Plated, Each
—$13.69
ZN40-Series bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of your headset.Compatible with 110-, 40-, and 10-Series headsets Item Specifications Bearing I.D. (mm) 30.3 Bearing O.D. (mm) 41 Bearing Type Cartridge Cartridge Bearing Angle 36x45 Thickness 6.5 Cane Creek ZN40-Series Bearing Headset Bearing UPC: 840226078304
Mpn: BAA1130by Cane Creek
-
Chris King Baseplate, 39.8mm ID for 1.5 Headsets
—$37.50
The Chris King Base Plates (Crown Races) DOES NOT work for DropSet series headsets 44.0mm OD base plate is for headsets produced prior to 4/1995 and have an F designation 40.5mm OD base plate is for headsets produced after 4/1995 and have a B designation Chris King Base Plates (Crown Races) Crown Race UPC: 841529031508
Mpn: PHS625by Chris King
-
Cane Creek ZN40-Bearing 52mm 45 x 45 Zinc, Each
—$24.99
ZN40-Series bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of your headset.Compatible with 110-, 40-, and 10-Series headsets Item Specifications Bearing I.D. (mm) 40.15 Bearing O.D. (mm) 52 Bearing Type Cartridge Cartridge Bearing Angle 45x45 Thickness 7 Cane Creek ZN40-Series Bearing Headset Bearing UPC: 840226078380
Mpn: BAA1161by Cane Creek
-
Cane Creek 40 Compression Ring 41-42/28.6
—$9.99
Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal.Compatible with 41mm and 42mm OD upper bearings Cane Creek Compression Ring Headset Small Part UPC: 840226093352
Mpn: AAA0001Bby Cane Creek
-
Cane Creek 110-Series Alloy 52/30 Conversion 1.5>1-1/8"
—$17.99
Cane Creek Crown Races Compatible across 10, 40 and 110 Series headsets and backwards compatible with S and XX Series All crown races feature integral molded seals Cane Creek Crown Races Crown Race UPC: 840226077062
Mpn: BAA0463Aby Cane Creek
-
Cane Creek 40-Series IS41/42 Short Top Subassembly IS41-42/28.6 Black
—$17.27
Cane Creek Headset Top Sub AssembliesStack height =9mm Cane Creek Top Covers Headset Small Part UPC: 840226077581
Mpn: BAA0725Kby Cane Creek
-
Chris King Baseplate, 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets
—$35
The Chris King Base Plates (Crown Races) 44.0mm OD base plate is for headsets produced prior to 4/1995 and have an F designation 40.5mm OD base plate is for headsets produced after 4/1995 and have a B designation Headset marked "B" Chris King Base Plates (Crown Races) Crown Race UPC: 841529023053
Mpn: PHS432by Chris King
-
Enduro 1.5" 45 x 45 Stainless Steel Angular Contact Bearing 40mm ID x 52mm OD x 7mm
—$37.50
ABI Headset Bearing for new builds or replacements. Item Specifications Bearing I.D. (mm) 40 Bearing O.D. (mm) 52 Bearing Type Cartridge Cartridge Bearing Angle 45x45 Thickness 7 Enduro Headset Bearing Headset Bearing UPC: 811780023130
Mpn: ACB 4545 150 SS-BAGby Enduro
-
Chris King Devolution Baseplate, 30.0mm ID for 1.5 lower bearing and 1- 1/8" steerer
—$35
The Chris King Base Plates (Crown Races) 44.0mm OD base plate is for headsets produced prior to 4/1995 and have an F designation 40.5mm OD base plate is for headsets produced after 4/1995 and have a B designation Chris King Base Plates (Crown Races) Crown Race UPC: 841529031683
Mpn: PHS626by Chris King
-
Cane Creek Ancora Expansion Plug - Gold
—$26.99
The Ancora Expansion Plug is designed for use with carbon steerer tubes. Machined Aluminum expansion wedges paired with a knurled sleeve ensure a secure fit with the correct preload amount. Accepts any standard preload bolt and top cap (sold separately) Compatible with steerer tube inner diameter of 22.75 mm to 24.6 mm Insertion length: 46mm Contact surface length: 38mm Item Specifications Color Gold Cane Creek Ancora Expansion Plug Compression Plug UPC: 840226091341
Mpn: BAK0010by Cane Creek
-
Cane Creek 110-Series Alloy 41/30 1-1/8" Crown Race
—$15.69
Cane Creek Crown Races Compatible across 10, 40 and 110 Series headsets and backwards compatible with S and XX Series All crown races feature integral molded seals Cane Creek Crown Races Crown Race UPC: 840226076928
Mpn: BAA0170Aby Cane Creek
-
Enduro 1-1/8" 36 x 45 degree Stainless Steel Angular Contact Bearing 30.2mm ID x 41mm OD
—$32.50
ABI Headset Bearing for new builds or replacements. Item Specifications Bearing I.D. (mm) 30.2 Bearing O.D. (mm) 41 Bearing Type Cartridge Cartridge Bearing Angle 36x45 Thickness 6.5 Enduro Headset Bearing Headset Bearing UPC: 811780022041
Mpn: ACB 3645 SS-BAGby Enduro
-
Cane Creek 40-Series Steel 41/30 1-1/8" Crown Race
—$13.55
Cane Creek Crown Races Compatible across 10, 40 and 110 Series headsets and backwards compatible with S and XX Series All crown races feature integral molded seals Cane Creek Crown Races Crown Race UPC: 840226076652
Mpn: BAA0008Sby Cane Creek
-
Cane Creek 40-Series Alloy Crown Race 52/40 + 6mm
—$24.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series Integral mold seals keep out the elements Item Specifications Crown Race 40 Cane Creek Crown Races Crown Race UPC: 840226078199
Mpn: BAA1078Kby Cane Creek
-
Cane Creek ZN40 Series Bearing Kit - 45 x 45, (1) 42mm O.D and (1) 52mm O.D
—$39.99
40-Series replacement cartridge bearings feature durable zinc construction.Compatible with 110-, 40-, and 10-Series headsets Item Specifications Bearing I.D. (mm) 42 Bearing O.D. (mm) 52 Bearing Type Cartridge Cartridge Bearing Angle 45x45 Thickness 7 Cane Creek ZN40-Series Bearing Headset Bearing UPC: 840226078465
Mpn: BAA1174by Cane Creek
-
Cane Creek 110-Series Alloy 47/30 Conversion Crown Race 1-1/4" to 1-1/8"
—$15.49
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series Integral mold seals keep out the elements Item Specifications Crown Race 30 Cane Creek Crown Races Crown Race UPC: 840226077802
Mpn: BAA0842Aby Cane Creek
-
Wheels Manufacturing 5/32" x 16 Headset Bearing Retainer: Bag of 10, Fits many 1" Imported headsets
—$15.28
Wheels Manufacturing Headset Bearings Item Specifications Bearing Type Retainer Bearing Wheels Manufacturing Headset Bearing Retainers Headset Bearing UPC: 836572001813
Mpn: BALLRET5/32X16by Wheels Manufacturing
-
Wolf Tooth 52/40 1 1/2" Crown Race
—$20.90
Crown races for Wolf Tooth headsets.For Wolf Tooth headsets Item Specifications Crown Race 40 Wolf Tooth Crown Race Crown Race UPC: 812719028011
Mpn: HS-CR40by Wolf Tooth
-
Enduro 1.5" 36 x 36 Degree Stainless Steel Angular Contact Bearing 40mm ID x 51mm OD x 6.5mm
—$39.75
ABI Headset Bearing for new builds or replacements. Item Specifications Bearing I.D. (mm) 40 Bearing O.D. (mm) 51 Bearing Type Cartridge Cartridge Bearing Angle 36x36 Thickness 6.5 Enduro Headset Bearing Headset Bearing UPC: 810191012634
Mpn: ACB 6808 SS, 290413-BAGby Enduro
-
Cane Creek ZN40-Bearing 41.8mm 45 x 45 Zinc, Each
—$13.90
ZN40-Series bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of your headset.Compatible with 110-, 40-, and 10-Series headsets Item Specifications Bearing I.D. (mm) 30.3 Bearing O.D. (mm) 41.8 Bearing Type Cartridge Cartridge Bearing Angle 45x45 Thickness 7 Cane Creek ZN40-Series Bearing Headset Bearing UPC: 840226079103
Mpn: BAA1162by Cane Creek
-
Wolf Tooth Compression Plug fits 1 1/8" Steerer
—$20
Compression plug for Wolf Tooth headsets.Compatible with steerer tube inner diameter 23.2 mm to 24.2 mm Item Specifications Color Silver Wolf Tooth Compression Plug Compression Plug UPC: 812719028332
Mpn: WT-CPLUGby Wolf Tooth
-
Cane Creek ZN40-Bearing 47mm 45 x 45 Zinc, Each
—$24.99
ZN40-Series bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of your headset.Compatible with 110-, 40-, and 10-Series headsets Item Specifications Bearing I.D. (mm) 34.25 Bearing O.D. (mm) 47 Bearing Type Cartridge Cartridge Bearing Angle 45x45 Thickness 7 Cane Creek ZN40-Series Bearing Headset Bearing UPC: 840226078373
Mpn: BAA1160by Cane Creek
-
Cane Creek 110-Series Steel 52/33 Conversion Crown Race 1.5" to 1-1/4"
—$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series Integral mold seals keep out the elements Item Specifications Crown Race 33 Cane Creek Crown Races Crown Race UPC: 840226077918
Mpn: BAA0902A-01by Cane Creek
-
Wolf Tooth Bearing - 41mm 36x45 Fits 1 1/8", Black Oxide
—$18.49
Headset bearings for Wolf Tooth headsets. Made from chromium steel for high load capacity and durability Black oxide coating reduces corrosion Replacement bearings Item Specifications Bearing O.D. (mm) 41 Bearing Type Black Oxide Steel Bearing Type Cartridge Cartridge Bearing Angle 36x45 Color Black Wolf Tooth Headset Bearing Headset Bearing UPC: 810006803631
Mpn: WTSSBRG-41-Bby Wolf Tooth
-
Cane Creek ZN40 Series Bearing Kit 36 x 45, 42/52mm
—$34.99
ZN40-Series bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of your headset.Compatible with 110-, 40-, and 10-Series headsets Item Specifications Bearing I.D. (mm) 42 Bearing O.D. (mm) 52 Bearing Type Cartridge Cartridge Bearing Angle 36x45 Thickness 6.5 Cane Creek ZN40-Series Bearing Headset Bearing UPC: 840226078458
Mpn: BAA1173by Cane Creek
-
Cane Creek +3mm 40mm Lower Race custom for Salsa
—$20
Cane Creek Lower Race Required to fit RockShox Bluto on SM and MD Beargrease Carbon frames May be required to fit Manitou Mastodon Mukluk Carbon frames Item Specifications Crown Race 40 keyword search +3 mm Crown Race Riser Salsa Lower Race Crown Race UPC: 840226125558
Mpn: BAA0855Kby Salsa
-
Wolf Tooth Headset Bearing 52mm 36x45 Fits 1 1/2"
—$39.95
Headset bearings for Wolf Tooth headsets.Replacement bearings Item Specifications Bearing Type Cartridge Cartridge Bearing Angle 36x45 Wolf Tooth Headset Bearing Headset Bearing UPC: 812719028318
Mpn: WTSSBRG-52by Wolf Tooth
-
Cane Creek ZN40-Bearing 41.8mm Zinc Plated, Each
—$14.99
ZN40-Series bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of your headset.Compatible with 110-, 40-, and 10-Series headsets Item Specifications Bearing I.D. (mm) 30.3 Bearing O.D. (mm) 41.8 Bearing Type Cartridge Cartridge Bearing Angle 36x45 Thickness 6.5 Cane Creek ZN40-Series Bearing Headset Bearing UPC: 840226078311
Mpn: BAA1131by Cane Creek
-
Enduro 1 1/4" 45 x 45 Degree Stainless Steel Angular Contact Bearing 34.1mm ID x 46.8mm OD x 7mm
—$42
ABI Headset Bearing for new builds or replacements. Item Specifications Bearing I.D. (mm) 34.1 Bearing O.D. (mm) 46.8 Bearing Type Cartridge Cartridge Bearing Angle 45x45 Thickness 7 Enduro Headset Bearing Headset Bearing UPC: 811780023123
Mpn: ACB 4545 125L SS-BAGby Enduro
-
Cane Creek 110-Series Alloy 47/33 45/45 1-1/4" Crown Race
—$12.99
Cane Creek Crown Races Compatible across 10, 40 and 110 Series headsets and backwards compatible with S and XX Series All crown races feature integral molded seals Cane Creek Crown Races Crown Race UPC: 840226077536
Mpn: BAA0699Aby Cane Creek
-
Wolf Tooth Bearing - 52mm 36x45 Fits 1 1/2", Black Oxide
—$20.67
Headset bearings for Wolf Tooth headsets.Replacement bearings Item Specifications Bearing O.D. (mm) 52 Bearing Type Black Oxide Steel Bearing Type Cartridge Cartridge Bearing Angle 36x45 Wolf Tooth Headset Bearing Headset Bearing UPC: 810006803648
Mpn: WTSSBRG-52-Bby Wolf Tooth
-
Wolf Tooth Compression Plug with Integrated Spacer Stem Cap, Black
—$24.95
The Wolf Tooth Compression Plug provides an anchor point to set the headset preload on road, MTB, or gravel bikes with carbon forks-essentially securing everything on the steerer tube. A stem cap with a 5mm integrated spacer is included, which is important since many fork manufacturers require the steerer tube to extend above the top of the stem. It is available in multiple color options to add some style to your bike. Fits forks with 1 1/8" steerer tubes Designed for carbon steerer tubes but works with metal steerer tubes with ID from 23.5 mm to 24.5 mm 7075-T6 aluminum Never use a star nut on forks with carbon steerers Wolf Tooth Compression Plug With Integrated Spacer Stem Cap Compression Plug UPC: 810006804720
Mpn: CPLUG-STEM5MM-BLKby Wolf Tooth
-
Cane Creek ZN40-Bearing 38mm Zinc Plated, Each
—$13.90
ZN40-Series bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of your headset.Compatible with 110-, 40-, and 10-Series headsets Item Specifications Bearing I.D. (mm) 27.25 Bearing O.D. (mm) 38 Bearing Type Cartridge Cartridge Bearing Angle 36x45 Thickness 6.5 Cane Creek ZN40-Series Bearing Headset Bearing UPC: 840226078366
Mpn: BAA1159by Cane Creek
-
Chris King Base Plate, 26.4mm ID
—$35
The Chris King Base Plates (Crown Races) 44.0mm OD base plate is for headsets produced prior to 4/1995 and have an F designation 40.5mm OD base plate is for headsets produced after 4/1995 and have a B designation Chris King Base Plates (Crown Races) Crown Race UPC: 841529023039
Mpn: PHS430by Chris King
-
Cane Creek Hellbender Lite Headset Bearing - 52mm, 36 x 45mm
—$39.99
Hellbender Lite bearings have an improved seal structure and are cross compatible with Cane Creek headsets. Item Specifications Bearing O.D. (mm) 52 Bearing Type Cartridge Cartridge Bearing Angle 36x45 Cane Creek Hellbender Lite Headset Bearing Headset Bearing UPC: 840226091143
Mpn: BAA2153Aby Cane Creek
-
Ritchey WCS Headset Compression Device 1-1/8 Black
—$19.95
Ritchey compression plug and top cap for for forks with carbon steerer. Item Specifications Color Black Ritchey Compression Plug Compression Plug UPC: 796941331593
Mpn: 33055337001by Ritchey
-
Cane Creek Hellbender Bearing, 42mm SHIS
—$29.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets. Item Specifications Bearing I.D. (mm) 30.3 Bearing O.D. (mm) 41.8 Bearing Type Cartridge Cartridge Bearing Angle 36x45 Thickness 6.5 Cane Creek Hellbender Headset Bearing Headset Bearing UPC: 840226078151
Mpn: BAA1058by Cane Creek
-
Cane Creek ZN40 Series Headset Bearing 49mm 36x45 degree
—$24.99
ZN40-Series bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of your headset.Compatible with 110-, 40-, and 10-Series headsets Item Specifications Bearing O.D. (mm) 49 Bearing Type Cartridge Cartridge Bearing Angle 36x45 Cane Creek ZN40-Series Bearing Headset Bearing UPC: 840226084367
Mpn: BAA2062by Cane Creek
-
Cane Creek Hellbender Lite Headset Bearing - 41mm, 36 x 45mm
—$26.99
Hellbender Lite bearings have an improved seal structure and are cross compatible with Cane Creek headsets. Item Specifications Bearing O.D. (mm) 41 Bearing Type Cartridge Cartridge Bearing Angle 36x45 Cane Creek Hellbender Lite Headset Bearing Headset Bearing UPC: 840226091129
Mpn: BAA2151Aby Cane Creek
-
MRP Riser Crown Race - High Rise, 10mm
—$25.46
The MRP Riser Crown Race offers 5mm (LowRise) or 10mm (HighRise) of added height compared to a traditional crown race. It can be used to gain downtube clearance for fork crowns, the Noken air-spring upgrade, or to adjust the geometry of your bike. The Riser Crown Race is compatible with any 1.5" headset using 36/45 bearings, giving you the flexibility to fine-tune your setup with ease. HighRise Riser Crown Race typically reduces head angle by approximately 0.5 degrees though the exact effect will vary based on your bike's geometry Compatible with 36/45 degree headset bearings 1.5" I.D with 36 degree mating surface (Cane Creek, FSA, Chris King, etc.) Aluminum HighRise Riser crown race weighs 24g Item Specifications Crown Race 40 MRP Riser Crown Race Crown Race UPC: 702430223874
Mpn: MR-20-1-301by MRP
-
Chris King InSet 1/2/3/7/8 Headset Bearing Cap - ZS44, Matte Gold 50th Anniversary
—$49
The Chris King InSet bearing cap features their patented GripLock (US Patent 8662517) retention design for exclusively reliable headset adjustment. For use with Chris King InSet 1,2, 3, 7, and 8 headsets ONLY Patented GripLock (US Patent 8662517) retention design for exclusively reliable headset adjustment Anodized finish provides added protection and great looks Item Specifications Color Matte Gold Material Aluminum Chris King InSet Headset Bearing Cap Headset Small Part UPC: 841529278897
Mpn: PHS714Y2by Chris King
1 2 Next »
Cane Creek 110-Series Alloy 52/40 1.5" Crown Race
Cane Creek ZN40 Series Bearing Kit 36 x 45, 41/52mm
Cane Creek 40-Series Steel 52/40 1.5" Crown Race
Cane Creek 40-Series Steel 52/30 Conversion Crown Race 1.5" to 1-1/8"
Cane Creek 40-Series ZS Short Top Subassembly ZS44/28.6 Black
Cane Creek ZN40-Bearing 52mm Zinc Plated, Each
ENVE Composites Compression Plug, 1 1/8"
Cane Creek Hellbender Bearing, 41mm SHIS
Cane Creek Hellbender Bearing, 52mm SHIS
Cane Creek ZN40-Bearing 41mm Zinc Plated, Each
Chris King Baseplate, 39.8mm ID for 1.5 Headsets
Cane Creek ZN40-Bearing 52mm 45 x 45 Zinc, Each
Cane Creek 40 Compression Ring 41-42/28.6
Cane Creek 110-Series Alloy 52/30 Conversion 1.5>1-1/8"
Cane Creek 40-Series IS41/42 Short Top Subassembly IS41-42/28.6 Black
Chris King Baseplate, 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets
Enduro 1.5" 45 x 45 Stainless Steel Angular Contact Bearing 40mm ID x 52mm OD x 7mm
Chris King Devolution Baseplate, 30.0mm ID for 1.5 lower bearing and 1- 1/8" steerer
Cane Creek Ancora Expansion Plug - Gold
Cane Creek 110-Series Alloy 41/30 1-1/8" Crown Race
Enduro 1-1/8" 36 x 45 degree Stainless Steel Angular Contact Bearing 30.2mm ID x 41mm OD
Cane Creek 40-Series Steel 41/30 1-1/8" Crown Race
Cane Creek 40-Series Alloy Crown Race 52/40 + 6mm
Cane Creek ZN40 Series Bearing Kit - 45 x 45, (1) 42mm O.D and (1) 52mm O.D
Cane Creek 110-Series Alloy 47/30 Conversion Crown Race 1-1/4" to 1-1/8"
Wheels Manufacturing 5/32" x 16 Headset Bearing Retainer: Bag of 10, Fits many 1" Imported headsets
Wolf Tooth 52/40 1 1/2" Crown Race
Enduro 1.5" 36 x 36 Degree Stainless Steel Angular Contact Bearing 40mm ID x 51mm OD x 6.5mm
Cane Creek ZN40-Bearing 41.8mm 45 x 45 Zinc, Each
Wolf Tooth Compression Plug fits 1 1/8" Steerer
Cane Creek ZN40-Bearing 47mm 45 x 45 Zinc, Each
Cane Creek 110-Series Steel 52/33 Conversion Crown Race 1.5" to 1-1/4"
Wolf Tooth Bearing - 41mm 36x45 Fits 1 1/8", Black Oxide
Cane Creek ZN40 Series Bearing Kit 36 x 45, 42/52mm
Cane Creek +3mm 40mm Lower Race custom for Salsa
Wolf Tooth Headset Bearing 52mm 36x45 Fits 1 1/2"
Cane Creek ZN40-Bearing 41.8mm Zinc Plated, Each
Enduro 1 1/4" 45 x 45 Degree Stainless Steel Angular Contact Bearing 34.1mm ID x 46.8mm OD x 7mm
Cane Creek 110-Series Alloy 47/33 45/45 1-1/4" Crown Race
Wolf Tooth Bearing - 52mm 36x45 Fits 1 1/2", Black Oxide
Wolf Tooth Compression Plug with Integrated Spacer Stem Cap, Black
Cane Creek ZN40-Bearing 38mm Zinc Plated, Each
Chris King Base Plate, 26.4mm ID
Cane Creek Hellbender Lite Headset Bearing - 52mm, 36 x 45mm
Ritchey WCS Headset Compression Device 1-1/8 Black
Cane Creek Hellbender Bearing, 42mm SHIS
Cane Creek ZN40 Series Headset Bearing 49mm 36x45 degree
Cane Creek Hellbender Lite Headset Bearing - 41mm, 36 x 45mm
MRP Riser Crown Race - High Rise, 10mm
Chris King InSet 1/2/3/7/8 Headset Bearing Cap - ZS44, Matte Gold 50th Anniversary
--- Shop Info ---
Newsletter Signup -
© 2026 Worldwide Cyclery
