—$94.99

Eliminate dropped chains forever and more than double your chainring life with the new OneUp Components V2 Chain Guide. As the trend for lower and slacker bikes continues, chainring protection is becoming even more important. The OneUp Bash Guide uses the same simple, one tool installation and adjustment as our best-selling ISCG05 Chain Guide, but adds more strength where you need it. The OneUp Bash Guide was developed with input from EWS World Champions, Richie Rude and Jared Graves. Reinforced Nylon bash guards and a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the OneUp Bash Guide can handle the biggest hits, but at a weight of only 102g (34T) you may forget it’s even there. The first chain guide designed to be both Oval and Boost compatible Weight: 90g 28-30T, 105g 32-34T, 110g 36T Capacity: 28-36T Chainline: 7.5mm adjustment Mount: ISCG05 Color: Black top guide piece included Material: 7075 aluminum, top guide glass reinforced thermoplastic OneUp Bash Guide V2 Chain Retention System EAN: 0038362821940

by OneUp

—$59.99

Eliminate dropped chains forever and more than double your chainring life with the new OneUp Components Chain Guide. At only 35g the OneUp Chain Guide weighs less than a sip of water, and can save you money in less than a season. The first chain guide designed to be both Oval and Boost compatible. Weight: 40g Capacity: 26-38T Chainline: 7.5mm adjustment Mount: ISCG05 Color: Black top guide piece included Material: 7075 aluminum, top guide glass reinforced thermoplastic WHY DO I NEED A GUIDE AND A NARROW WIDE CHAINRING? NW rings are awesome, but they're not perfect and every once in a while you can drop a chain while riding. On a social ride, this means getting dropped by your friends. But when racing an Enduro a dropped chain can cost you the podium, which is why almost every EWS pro runs both a chain guide and narrow wide chainring. HOW CAN I DOUBLE MY CHAINRING LIFE? As a Narrow Wide ring wears, over time the teeth thin and lose their chain retention ability, leading to more dropped chains. The OneUp guide extends NW ring life by limiting the chains side-to-side movement reducing the NW tooth wear and totally preventing the chain from derailing. Installing a OneUp guide means you now only have to replace your chainring when the driving faces have worn out, which typically doubles your usable chainring life. Buy less stuff - Work Less Ride More. OneUp Top Chainguide V2 Chain Retention System EAN: 0038262821941

by OneUp

—$119.95

The absoluteBLACK Oval Bash Guide is designed specifically for oval chainrings, keeping your chain secure at every single crank position. This bash guard system provides exceptional durability with maximum weight savings thanks to intelligent design and titanium hardware. Chainline is adjustable in 0.5mm increments, with 4 included spacers 0.5, 1, 2 and 3.5mm Designed for use with any 1x10, 1x11 or 1x12 drivetrain with absoluteBLACK oval or round chainring Suitable for XC, trial, enduro, and aggressive enduro 26-34t capacity for oval chainrings or 28-36t capacity for round chainrings The outer section of the cage can be moved without tools, allowing for easy access to the chain while on the trail Fits to ISCG-05 mount Small markers on the side of the back-plate show the ideal position of the guide for your desired chainring size 69g Fully compatible with oval chainrings The adjustable 48-53mm chainline makes it compatible with most bike setups Includes titanium hardware and spacers Item Specifications Color Black Defined Color Black Material Aluminum Max Tooth (teeth) 34 Weight 69 absoluteBLACK Oval Bash Guide Chain Retention System EAN: 5110846002559

by absoluteBLACK

—$39.95

The MRP 1x V3 CS is a durable and lightweight chainguide that features a dual-material "TR" upper guide with a soft material on the interior walls for quiet performance. 28-34t range (oval compatible up to 32t) Ideal for 1x10, 1x11, and 1x12 drivetrains Tracked and grooved upper guide and backplate interface increases stiffness and eases installation Compatible with chainlines 49mm and wider Composite backplate Item Specifications Chainguide Mount Type ISCG-05 Color Black Max Tooth (teeth) 34 Weight 33 MRP 1x V3 CS Chainguide Chain Retention System UPC: 702430172936

by MRP

—$20.99

Plastic and rubber replacement parts for e*thirteen chainguides. Replacement upper slider for Gen2 LG1 and TRS guides. Fits Gen2 guides only Includes Upper slider, bolt x1, nut x1 e*thirteen Chainguide Service Parts Chain Retention System Part EAN: 4710751500822

by e*thirteen

—$18.25

Plastic and rubber replacement parts for e*thirteen chainguides. e*thirteen Chainguide Service Parts Chain Retention System Part EAN: 4710751503212

by e*thirteen

—$15

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$29.95

Adaptor backplate that allows an ISCG-05 guide to be mounted on a bike with a traditional threaded bottom bracket. MRP BB Adaptor Chain Retention System Part UPC: 702430155021

by MRP

—$15

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$79.95

Designed for enduro and trail riding, the MRP AMg CS chain guide utilizes a premium-finish steel backplate, durable nylon upper guide and a patented integrated skid to eliminate dropped chains and bent chainrings. Premium-finish steel backplate provides stiffness and durability The co-molded TR upper guide provides for quiet operation Compatible with 28-34T chainrings ISCG-05 mount Designed for use with 1x drivetrains Boost compatible Item Specifications Chainguide Mount Type ISCG-05 Color Black Defined Color Black Material Steel Max Tooth (teeth) 34 Weight 152 MRP AMg CS Composite Chain Guide Chain Retention System UPC: 702430174343

by MRP

—$15

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$69.95

MRP XCg line of bash guards tuck neatly behind your crankset and protect those costly chainrings from damage. Available in ISCG-05 and BB mount options. Perfect for frames with integrated upper guides Mounts to lowest two ISCG-05 bolt holes Sturdy aluminum backplate for extra durability and stiffness Protects chainrings up to 32T (or 30T oval) Designed for XC and trail riding Integrated skid protects chainrings and glides over rocks and obstacles Helps prevent frame damage caused by dropped chains Item Specifications Color Black Defined Color Black Max Tooth (teeth) 32 MRP XCg Bash Guards Chain Retention System UPC: 702430173759

by MRP

—$19.50

Frame tab adaptersFor use with English threaded bottom bracket shells with no ISCG'05 mount tabs e*thirteen Adaptors Chain Retention System Part EAN: 4712757573329

by e*thirteen

—$15

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$11.12

Plastic and rubber replacement parts for e*thirteen chainguides. e*thirteen Chainguide Service Parts Chain Retention System Part EAN: 4710751500884

by e*thirteen

—$15

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$20.99

Plastic and rubber replacement parts for e*thirteen chainguides. e*thirteen Chainguide Service Parts Chain Retention System Part EAN: 4710751500839

by e*thirteen

—$19.95

MRP chain retention system parts for G2, System 1,2 and 3, SB-3 and LRP guides Kit includes one roller with bearings and mounting bolts/washers; there are two roller kits per chainguide Bearing, Bolt, Sleeve, Washer and Urethane Roller 50g MRP Rollers and Pulleys Chain Retention System Part UPC: 702430129077

by MRP

—$69.95

The absoluteBLACK Oval Chainguide is designed specifically for oval chainrings, keeping the chain secure at every single crank position Fits to ISCG-05 mount Fully compatible with 26-34 tooth oval chainrings, or 28-36 tooth round chainrings Designed for use with any 1x10, 1x11 or 1x12 drivetrain with absoluteBLACK oval or round chainring Chainline is adjustable in 0.5mm increments, with 4 included spacers 0.5, 1, 2 and 3.5mm The outer section of the cage can be moved without tools, allowing for easy access to the chain while on the trail Fully compatible with oval chainrings The adjustable 48-53mm chainline makes it compatible with most bike setups Includes titanium hardware and spacers Item Specifications Chainguide Mount Type ISCG-05 Color Black Max Tooth (teeth) 34 Weight 22.2 absoluteBLACK Oval Guide Chain Retention System EAN: 5110846001804

by absoluteBLACK

—$99.95

The MRP AMg SL chainguide eliminates dropped chains and bent chainrings. It combines a lightweight upper guide and a durable bashguard, mated to an aluminum backplate. Unlike the cheap, flexy, and rattle-prone upper guides found on other products, the AMg features our premium, stiff, silent upper guide and a tough fiber-infused bashguard. Aluminum back plate is strong and lightweight Works with 28-32t round rings (and 26-30t oval rings) 4mm of chainline adjustment (without use of spacers) so adjustments can be made quickly Works with most chainlines (including non-boost, Boost, and Super Boost) Forefront 4-way, front-accessible setup and adjustment Pop-Up tool-free chain access for simplified installation and drivetrain maintenance Upper guide features TPU co-molding to silence chain contact Requires ISCG-05 tabs Item Specifications Chainguide Mount Type ISCG-05 Color Black Defined Color Black Material Aluminum Material Composite Max Tooth (teeth) 32 Weight 109 MRP AMg SL Chainguide Chain Retention System UPC: 702430205849

by MRP

—$129.95

The e*thirteen Vario Downhill chainguides are ready for the toughest riding. Most appropriate for all downhill or freeride riding on bikes with 140mm travel and up Adjustable upper slider: The Vario compact slider offers lateral infinite adjustments to cater to different chainlines, using a simple single bolt mechanism Versatility in mounting: The armature can be fixed either inside or outside of the guide backplate to better suit various bike setups Choice in coverage: Riders have the option of choosing between a longer, full-coverage slider and a shorter, ultra-compact slider Bashguards: Includes a selection of bashguards for 28-32 or 34-36 tooth chainring sizes Optional lower idler: For those who prefer, the downhill guides can be used with or without the super quiet, low-friction stealth lower idler for maximum chain retention Compatible with Boost and SuperBoost Chainlines Premium aluminum backplate 28-36t chainring capacity ISCG05 3-bolt mount Item Specifications Chainguide Mount Type ISCG-05 Color Black Defined Color Black Material Aluminum Max Tooth (teeth) 36 Weight 181 e*thirteen Vario Downhill Chainguide Chain Retention System EAN: 4710751509269

by e*thirteen

—$69.95

If you are a 1x rider and can't afford to drop a chain, the Wolf Tooth GnarWolf chain guide is for you. Designed specifically around 1x wide/narrow chainrings the GnarWolf will keep your chain glued to your chainring in the roughest and muddiest of conditions. Designed for use with round chainrings 28t-36t or oval chainrings 28t-34 on bikes with an ISCG-05 Mount Infinite vertical adjustment between 28t and 36t for round chainrings and 28t-34t oval chainrings Due to frame and bike geometry there will be some bikes that need modifications or flat out won't work - Here are the known exceptions: Ibis Mojo 3 (will not work), Ibis Ripmo (will not work), Ibis Ripley (will not work), Specialized Stumpjumper 2016-2017 models (works with 1mm of spacers between the frames ISCG05 mounts and the guide, washers not included), Evil The Following (will not work), Santa Cruz Tallboy (will not work) 8mm of chainline adjustment via Wolf Tooth's GuideLock quick adjustment system (No shims required) Specific guide shaping is optimized for use with elliptical and round chainrings Installation only takes a few minutes and all adjustments made easily with common 4 mm hex key Easy chain removal without losing any of the guide's adjustments Guide is designed for 1x use only and NOT compatible with crankset mounted bashrings Item Specifications Chainguide Mount Type ISCG-05 Color Black Defined Color Black Max Tooth (teeth) 36 Wolf Tooth Gnarwolf Chainguide Chain Retention System UPC: 812719023009

by Wolf Tooth

—$34.99

K-Edge Pro Chain Catchers. A lighter version of the original K-Edge chain catcher, the Pro has been tested and proven. 6061 T6 aluminum construction for light weight - 9.8 grams including hardware Locking system allows installation and setup of front derailleur separate from adjustment of the chain catcher Compatible with all braze-on road front derailleurs from SRAM, Campagnolo, and Shimano Item Specifications Front Derailleur Clamp Braze-on K-Edge Chain Catcher Professional Chain Deflector UPC: 858953003230

by K-Edge

—$29.95

Replacement uppers for a variety of MRP chain guides. MRP Upper Guide Chain Retention System Part UPC: 702430165198

by MRP

—$15

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$34.99

Problem Solvers Chain Spy Chain Deflectors 31.8mm clamp with shims for 28.6mm Alloy clamp & slider Plastic guide Not intended for downhill, aggressive or trick riding Item Specifications Front Derailleur Clamp 31.8 (1-1/4") Problem Solvers ChainSpy Chain Retention System Chain Deflector UPC: 708752095236

by Problem Solvers

—$69.95

If you are a 1x rider and can't afford to drop a chain, the Wolf Tooth GnarWolf chain guide is for you. Designed specifically around 1x wide/narrow chainrings the GnarWolf will keep your chain glued to your chainring in the roughest and muddiest of conditions. Designed for use with round and oval 34t-46t chainrings on bikes with an Integral Braze-On Mount Infinite vertical adjustment between 34t and 46t for round and oval chainrings Accommodate chainlines from approx. 45mm to 51mm 8mm of chainline adjustment via Wolf Tooth's GuideLock quick adjustment system (No shims required) Specific guide shaping is optimized for use with elliptical and round chainrings Installation only takes a few minutes and all adjustments made easily with common 4 mm hex key Easy chain removal without losing any of the guide's adjustments Guide is designed for 1x use only and NOT compatible with crankset mounted bashrings Item Specifications Chainguide Mount Type Braze-on Color Black Defined Color Black Max Tooth (teeth) 46 Wolf Tooth Gnarwolf Chainguide Chain Retention System UPC: 812719023047

by Wolf Tooth

—$19.50

Plastic and rubber replacement parts for e*thirteen chainguides. e*thirteen Chainguide Service Parts Chain Retention System Part EAN: 4710751500846

by e*thirteen

—$15.35

e*thirteen Bolt Kits e*thirteen ISCG Bolt Kits Chain Retention System Part EAN: 4712757572940

by e*thirteen

—$15

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$79.95

The e*thirteen Vario Enduro chainguide has a tough alloy 3-bolt backplate, fitted with an ultra-compact upper slider and bashguard. It's perfect for the bike park or when trails get a little rowdy and require more protection. Most appropriate for all mountain or enduro riding on bikes with 140mm travel and up. Adjustable upper slider: The Vario compact slider offers infinite lateral adjustments to cater to different chainlines, using a simple single bolt mechanism Versatility in mounting: The armature can be fixed either inside or outside of the guide backplate to better suit various bike setups Choice in coverage: Riders have the option of choosing between a longer, full-coverage slider and a shorter, ultra-compact slider Bashguards: Includes a selection of bashguards for 28-32 or 34-36 tooth chainring sizes Compatible with Boost and SuperBoost Chainlines Premium aluminum backplate 28-36t chainring capacity ISCG05 3-Bolt mount Item Specifications Chainguide Mount Type ISCG-05 Color Black Defined Color Black Material Aluminum Max Tooth (teeth) 36 Weight 138 e*thirteen Vario Enduro Chainguide Chain Retention System EAN: 4710751509276

by e*thirteen

—$17.69

MRP chain retention system parts for G2, System 1,2 and 3, SB-3 and LRP guides MRP Rollers and Pulleys Chain Retention System Part UPC: 702430136556

by MRP

—$99.95

MRP XCg line of bash guards tuck neatly behind your crankset and protect those costly chainrings from damage. Available in ISCG-05 and BB mount options. Carbon fiber backplate provides premium durability and stiffness ISCG-05 mount Protects chainrings up to 32T Designed for XC and trail riding Integrated skid protects chainrings and glides over rocks and obstacles Helps prevent frame damage caused by dropped chains Item Specifications Color Carbon Defined Color Carbon Material Carbon Max Tooth (teeth) 32 Weight 88 MRP XCg Bash Guards Chain Retention System UPC: 702430185608

by MRP

—$39.95

The MRP 1x V3 CS is a durable and lightweight chainguide that features a dual-material "TR" upper guide with a soft material on the interior walls for quiet performance. 28-36t range Ideal for 1x10, 1x11, and 1x12 drivetrains Tracked and grooved upper guide and backplate interface increases stiffness and eases installation Compatible with chainlines 49mm and wider Composite backplate Item Specifications Chainguide Mount Type E2 Type Mount Color Black Max Tooth (teeth) 36 MRP 1x V3 CS Chainguide Chain Retention System UPC: 702430174350

by MRP

—$69.95

If you are a 1x rider and can't afford to drop a chain, the Wolf Tooth GnarWolf chain guide is for you. Designed specifically around 1x wide/narrow chainrings the GnarWolf will keep your chain glued to your chainring in the roughest and muddiest of conditions. Designed for use with round and oval 28t-36t chainrings on bikes with a High Direct Mount Infinite vertical adjustment between 28t and 36t for round and oval chainrings Chainline adjustment between 48mm to 54mm 8mm of chainline adjustment via Wolf Tooth's GuideLock quick adjustment system (No shims required) Specific guide shaping is optimized for use with elliptical and round chainrings Installation only takes a few minutes and all adjustments made easily with common 4 mm hex key Easy chain removal without losing any of the guide's adjustments Guide is designed for 1x use only and NOT compatible with crankset mounted bashrings Item Specifications Chainguide Mount Type High Direct Mount Color Black Defined Color Black Max Tooth (teeth) 36 Wolf Tooth Gnarwolf Chainguide Chain Retention System UPC: 812719023016

by Wolf Tooth

—$64.95

If you are a 1x rider and can't afford to drop a chain, the Wolf Tooth GnarWolf chain guide is for you. Designed specifically around 1x wide/narrow chainrings the GnarWolf will keep your chain glued to your chainring in the roughest and muddiest of conditions. Designed for use with round and oval 32-52t chainrings on bikes with a 34.9mm round seat tube Nearly unlimited vertical adjustment by sliding the seat tube clamp Accommodate chainlines from approx. 45mm to 51mm 8mm of chainline adjustment via Wolf Tooth's GuideLock quick adjustment system (No shims required) Specific guide shaping is optimized for use with elliptical and round chainrings Installation only takes a few minutes and all adjustments made easily with common 4 mm hex key Easy chain removal without losing any of the guide's adjustments Guide is designed for 1x use only and NOT compatible with crankset mounted bashrings Item Specifications Chainguide Mount Type Seat Tube Color Black Defined Color Black Max Tooth (teeth) 52 Wolf Tooth Gnarwolf Chainguide Chain Retention System Part UPC: 812719026062

by Wolf Tooth

—$22.99

The K-EDGE chain catcher mounts to all braze-on type front derailleurs. Prevents frame damage from a dropped chain. 10 grams For use with braze-on front derailleurs Protects your valuable frame from damage caused by a derailed chain Includes all mounting hardware for Shimano, SRAM and Campagnolo front derailleurs, including a new radius washer with secure mounting interface 6061 T6 aluminum Item Specifications Front Derailleur Clamp Braze-on K-Edge Chain Catcher Road Braze On Chain Catcher Chain Deflector UPC: 852508002006

by K-Edge

—$84.95

The e*thirteen Vario Downhill chainguides are ready for the toughest riding. Most appropriate for all downhill or freeride riding on bikes with 140mm travel and up Versatility in mounting: The armature can be fixed either inside or outside of the guide backplate to better suit various bike setups Choice in coverage: Includes a selection of bashguards for 28-32 or 34-36 tooth chainring sizes Optional lower idler: For those who prefer, the downhill guides can be used with or without the super quiet, low-friction stealth lower idler for maximum chain retention Compatible with Boost and SuperBoost Chainlines Premium aluminum backplate 28-36t chainring capacity ISCG05 2-Bolt mount Item Specifications Chainguide Mount Type ISCG-05 Color Black Defined Color Black Material Aluminum Max Tooth (teeth) 36 Weight 120 e*thirteen Vario Downhill Chainguide Chain Retention System EAN: 4710751509290

by e*thirteen

—$99.95

SXg Alloy Chain Guide Full-sized upper and lower guides with quiet, TPU co-molded inner Nylon skid attached directly to integrated lower guide Swingset hardware allows guides to rotate apart for easy chain installation Installs and adjusts with a single 4mm hex Compatible with chain lines 49mm and wider, including Boost 148 Compatible with 1x7, 1x9, 1x10, and 1x11 drivetrains Item Specifications Chainguide Mount Type ISCG-05 Color Black MRP SXg Alloy Chain Retention System UPC: 702430173742

by MRP

—$99.95

The 1x V3 Carbon chain guide provides extra security for 1x10 or 1x11 drivetrains. A thick carbon mounting plate provides stiffness, durability, and light weight. Compatible with 28t to 38t chainrings Carbon backplate Softer co-molded upper for quiet operation Installs and adjusts with a single 4mm hex Tracked and grooved upper guide and backplate increases stiffness MRP 1x V3 Carbon Chain Retention System UPC: 702430164993

by MRP

—$149.95

The MRP MXg only guide specifically designed for high-pivot and similar suspension layouts with high chain growth. Silence and efficiency are the key benefits of this chainguide. For use with High-Pivot and similar suspension layouts Features MRP's S5 roller with 14 mini-teeth to keep it spinning smoothly in all conditions Large diameter roller reduces the articulation angle of the chain, which yields better efficiency and feel than typical, small guide pulleys Aluminum back plate is strong and light weight Integrated skid provides smooth chain movement Confirmed fit list: Forbidden models: Druid, Dreadnought; Cannondale model: Jekyll; GT model: Force; Devinci models: Chainsaw, Spartan Item Specifications Chainguide Mount Type ISCG-05 Color Black Defined Color Black Material Aluminum Material Composite Max Tooth (teeth) 32 MRP MXg SL Chainguide Chain Retention System UPC: 702430206327

by MRP

—$24.95

Replacement skids for MRP bash guards and chain guides. MRP Skid Chain Retention System Part UPC: 702430165181

by MRP

—$15.57

e*thirteen Bolt Kits e*thirteen ISCG Bolt Kits Chain Retention System Part EAN: 4712757572964

by e*thirteen

—$69.95

The 1x V3 chain guide provides extra security for 1x10 or 1x11 drivetrains in a lightweight, durable package. Available with a variety of mounting options. Compatible with 28t to 40t chainrings Softer co-molded upper for quiet operation Installs and adjusts with a single 4mm hex Tracked and grooved upper guide and backplate increases stiffness MRP 1x V3 Alloy Chainguide Chain Retention System UPC: 702430165228

by MRP

—$99.95

The MRP AMg SL chainguide eliminates dropped chains and bent chainrings. It combines a lightweight upper guide and a durable bashguard, mated to an aluminum backplate. Unlike the cheap, flexy, and rattle-prone upper guides found on other products, the AMg features our premium, stiff, silent upper guide and a tough fiber-infused bashguard. Aluminum back plate is strong and lightweight Works with 32-36t round rings (and 30-34t oval rings) 4mm of chainline adjustment (without use of spacers) so adjustments can be made quickly Works with most chainlines (including non-boost, Boost, and Super Boost) Forefront 4-way, front-accessible setup and adjustment Pop-Up tool-free chain access for simplified installation and drivetrain maintenance Upper guide features TPU co-molding to silence chain contact Requires ISCG-05 tabs Item Specifications Bashguard No Chainguide Mount Type ISCG-05 Color Black Defined Color Black Material Aluminum Material Composite Max Tooth (teeth) 36 Weight 105 MRP AMg SL Chainguide Chain Retention System UPC: 702430205900

by MRP

—$15.01

MRP chain retention system parts for G2, System 1,2 and 3, SB-3 and LRP guides MRP Upper Guide Chain Retention System Part UPC: 702430142939

by MRP

—$69.95

The 1x V3 chain guide provides extra security for 1x10 or 1x11 drivetrains in a lightweight, durable package. Available with a variety of mounting options. Compatible with 28t to 38t chainrings Softer co-molded upper for quiet operation Installs and adjusts with a single 4mm hex Tracked and grooved upper guide and backplate increases stiffness MRP 1x V3 Alloy Chainguide Chain Retention System UPC: 702430165242

by MRP

—$44.95

Replacement skids for MRP bash guards and chain guides. MRP Skid Chain Retention System Part UPC: 702430152877

by MRP

—$44.95

The LoneWolf Aero Chainguide prevents dropped chains on road, gravel, and CX bikes with 1x drivetrains. This chainguide has been tested and developed with Team Jumbo-Visma, has been trusted in road cycling's biggest races, and ridden to victory in the 2023 Giro d'Italia. Combines a low profile head that only covers the top and inboard side of the chain with Wolf Tooth's GuideLock quick adjustment system that eliminates the need for shims to provide security in a light, easy to use, and aerodynamically optimized chainguide solution For use with any road or gravel frame with a braze-on for front derailleur running a 34t-52t chainring Only for use with 1x drivetrains Conveniently works with both round or oval chainrings Head has 8mm of adjustment for chainline via Wolf Tooth's GuideLock quick adjustment system 6061-T6 aluminum base, stainless steel hardware, and injection molded head Item Specifications Chainguide Mount Type Braze-on Color Black Defined Color Black Max Tooth (teeth) 52 Weight 33 Wolf Tooth LoneWolf Aero Chainguide Chain Retention System UPC: 810006808711

by Wolf Tooth

—$99.95

G5 CS Steel Chain Guide Co-molded "HD2" upper guide with softer durometer interior for silent guidance Integrated skid protects chainrings and glides over rocks and obstacles Includes standard pulley and new G-slide slider block for quiet, dependable operation in muddy and dank conditions Installs and adjusts with a single 4mm hex Swingset hardware allows guides to rotate apart for easy chain installation Compatible with chain lines 50mm and wider Compatible with 7-12 speed drivetrains Steel backplate Item Specifications Chainguide Mount Type ISCG-05 Color Black Max Tooth (teeth) 38 Weight 236 MRP G5 CS Steel Chain Retention System UPC: 702430186407

by MRP