—$159.95

The Wolf Tooth EnCase Pump offers easy access, quick use, and reliable performance for mountain, gravel, and fat bike tires. It requires less force per stroke than competitors, making it efficient for high-volume tires. The EnviroLock sealing protects internal components from water and debris. The pump is easily accessible when mounted on a frame, ensuring it remains clean and ready to use. Part of the EnCase System, The pump can store an EnCase System tools. Designed for high-volume tires with less effort per pump stroke Enviro-Lock sealing protects internal components from water and debris Fits EnCase System multi-tools or tubeless tire plug inside the pump Precision machined 6061 aluminum body for long-lasting use Item Specifications Color Black Defined Color Black Includes Gauge No Includes Mount Bracket Yes PSI 70 Valve Compatibility Presta Weight 260 Wolf Tooth EnCase Pump Frame Pump UPC: 810159400060

by Wolf Tooth

—$79.95

Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 3mm offset is designed for Boost 52mm chainline Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings Not compatible with 9 speed chains If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Round or Oval Round Tooth Count 34 Wolf Tooth RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 810006808216

by Wolf Tooth

—$31.95

These Presta valve stems are compatible with tubeless rims and tires for road, gravel, mountain, and fat bike wheels. The kit includes two Presta valve stems, two machined aluminum caps, two nuts, two extra valve cores, a unique machined aluminum valve core remover, and three rubber base options for compatibility with more rim internal shapes. Slotted stem base for compatibility with tire inserts Oversized stem nut for better sealing and easier removal Stem threaded below rubber seal for better performance on single wall rims Three rubber bases included: two types of cones (one installed), one channel Available in 44mm or 60mm stem length options Replacement parts available via Wolf Tooth Right To Repair, including cap kit with two caps, nut kit with two nuts, and valve cores Wolf Tooth Tubeless Valve Stem Kit Tubeless Valves UPC: 812719029223

by Wolf Tooth

—$89.95

These chainrings are for Shimano GRX cranks. They feature Wolf Tooth's patented Drop-Stop design for the best wear life, chain retention, and mud clearance. Drop-Stop ST is specifically for the Shimano 12-speed Hyperglide+ chain, which is used by GRX 12-speed. Compatible with Shimano GRX cranksets including RX600 and RX810 Drop-Stop ST is designed for Shimano Hyperglide+ and KMC 12-speed chains only Wolf Tooth s patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud-shedding ability Intended for 50mm chainlines (Same as Shimano GRX chainrings) CNC machined with premium 7075-T6 aluminum for exceptional strength and weight savings Manufactured in Minnesota USA Item Specifications Chainring BCD 110 Shimano Asymmetric Color Black Defined Color Black Drivetrain Speeds 12 Material Aluminum Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 44 Wolf Tooth 110 Asymmetrical BCD Chainrings for 12-Speed Shimano GRX Chainring UPC: 810006809145

by Wolf Tooth

—$84.95

These Wolf Tooth direct mount rings are designed for SRAM cranks with 8-bolt mounting. This chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings Compatible with SRAM AXS cranksets and other cranks that use the 8-bolt mounting Includes set of 8 custom T20 stainless steel bolts Made from 7075-T6 aluminum for long life Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM 8-Bolt Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 0 Round or Oval Round Tooth Count 36 Wolf Tooth SRAM 8-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006808964

by Wolf Tooth

—$89.95

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 0mm offset is designed for BB30 short spindle cranks (49mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM 3-Bolt Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 0 Round or Oval Oval Tooth Count 30 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006808032

by Wolf Tooth

—$84.95

These Wolf Tooth direct mount rings are designed for SRAM cranks with 8-bolt mounting. This chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings Compatible with SRAM AXS cranksets and other cranks that use the 8-bolt mounting Includes set of 8 custom T20 stainless steel bolts Made from 7075-T6 aluminum for long life Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM 8-Bolt Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 3 Round or Oval Round Tooth Count 32 Wolf Tooth SRAM 8-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006808575

by Wolf Tooth

—$84.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 0mm offset is designed for BB30 short spindle cranks (49mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM 3-Bolt Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 0 Round or Oval Round Tooth Count 34 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006807929

by Wolf Tooth

—$84.95

These Wolf Tooth Elliptical direct mount rings are designed for SRAM cranks with 8-bolt mounting. This chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings Compatible with SRAM AXS cranksets and other cranks that use the 8-bolt mounting Includes set of 8 custom T20 stainless steel bolts Made from 7075-T6 aluminum for long life Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM 8-Bolt Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 3 Round or Oval Oval Tooth Count 34 Wolf Tooth SRAM Elliptical 8-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006808612

by Wolf Tooth

—$25.95

The precision-engineered Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. M6 stainless steel bolt with integrated washer Tool interface - 4mm hex key Item Specifications Color Olive Defined Color Green Diameter 29.8 Material Aluminum Type Bolt-On Wolf Tooth Seatpost Clamp Seatpost Clamp UPC: 810006808445

by Wolf Tooth

—$84.95

Wolf Tooth Direct Mount Chainrings for Trek TQ E-Bike Motors are compatible with all Boost and Super Boost bikes that use the Trek TQ Motor. This brings a lightweight chainring with patented Drop-Stop technology to e-bike chainrings for the first time. Direct Mount Chainrings for Trek TQ E-Bike Motors are machined with 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. Drop-Stop B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, SRAM Flattop Road or Transmission (T-Type), KMC, Connex or Wippermann chains 55 mm chainline Item Specifications Color Black Defined Color Black Designed for ebike Yes Tooth Count 30 Wolf Tooth Trek TQ Direct Mount Ebike Chainring eBike Chainrings and Sprockets UPC: 810006807080

by Wolf Tooth

—$84.95

Wolf Tooth Direct Mount Chainrings for Shimano EP-8 E-Bike Motors are compatible with all Boost and Super Boost bikes that use the Shimano EP-8 Motor. This brings a lightweight chainring with patented Drop-Stop technology to e-bike chainrings for the first time. Direct Mount Chainrings for Shimano EP-8 E-Bike Motors are machined with 7075-T6 aluminum at Wolf Tooth in Minnesota, USA.Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains Item Specifications Color Black Defined Color Black Designed for ebike Yes Tooth Count 32 Wolf Tooth Shimano EP-8 Direct Mount Ebike Chainring eBike Chainrings and Sprockets UPC: 810006808506

by Wolf Tooth

—$199.95

Waveform Pedals are designed for all-mountain riding, from XC to downhill. Available in two different sizes, proportionally scaled to provide a supportive platform that's shaped to match the footprint of your shoe. They have a slim, dual-concave profile that is 14mm thick at the perimeter and just 12.5mm thick in the center, cradling your foot for optimal pedal feel. Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. The design also features a large, tapered leading edge to deflect pedal strikes on rough terrain. A custom radial seal protects three fully sealed cartridge bearings for low-friction riding in all conditions. Proportionally designed platform, shaped to match shoe profile Slim, concave profile with large tapered leading edge to deflect pedal strikes 3 low friction, fully sealed cartridge bearings and 1 Igus bushing per pedal V-ring rotary seal to protect against contamination 11 stainless steel, rear-loading pins per side (pins 4.5mm tall), includes 6 extra grip pins Fully serviceable with a set of hex keys, no special tools needed Item Specifications Color Silver Defined Color Silver Pedal Body Material Aluminum Pedal Spindle 9/16" Pedal Type Platform Spindle Material 17-4 PH Stainless Steel Wolf Tooth Waveform Pedals Pedals UPC: 810006807578

by Wolf Tooth

—$199.95

Waveform Pedals are designed for all-mountain riding, from XC to downhill. Available in two different sizes, proportionally scaled to provide a supportive platform that's shaped to match the footprint of your shoe. They have a slim, dual-concave profile that is 14mm thick at the perimeter and just 12.5mm thick in the center, cradling your foot for optimal pedal feel. Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. The design also features a large, tapered leading edge to deflect pedal strikes on rough terrain. A custom radial seal protects three fully sealed cartridge bearings for low-friction riding in all conditions. Large Platform: 112mm x 106mm Proportionally designed platform, shaped to match shoe profile Slim, concave profile with large tapered leading edge to deflect pedal strikes 3 low friction, fully sealed cartridge bearings and 1 Igus bushing per pedal V-ring rotary seal to protect against contamination 11 stainless steel, rear-loading pins per side (pins 4.5mm tall), includes 6 extra grip pins Fully serviceable with a set of hex keys, no special tools needed Item Specifications Color Orange Defined Color Orange Pedal Body Material Aluminum Pedal Spindle 9/16" Pedal Type Platform Spindle Material 17-4 PH Stainless Steel Wolf Tooth Waveform Pedals Pedals UPC: 810006806809

by Wolf Tooth

—$39.95

The new Wolf Tooth 6-Bit Hex Wrench is a slim, strong multi-tool with 11 functions for common bike repairs and everyday needs. Six hex bits are stored inside the handles that fit into the end of a ball detent swivel head for use. It is small enough to fit into a riding tool wrap or pocket, and has an optional key ring attachment to fit on any keychain for use away from the bike. Six bits with eleven functions: 2, 2.5, 3, 4, 5, 6, and 8mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible bits All bits are ED-coated and corrosion-resistant Magnets keep all bits in place and secure Ball detent swivel head tested to over 40Nm of torque Same bits as 8-Bit System and EnCase System multi-tools Replacement parts available Wolf Tooth 6-Bit Hex Wrench Multi-Tool Bike Multi-Tool UPC: 810006805703

by Wolf Tooth

—$39.95

The new Wolf Tooth 6-Bit Hex Wrench is a slim, strong multi-tool with 11 functions for common bike repairs and everyday needs. Six hex bits are stored inside the handles that fit into the end of a ball detent swivel head for use. It is small enough to fit into a riding tool wrap or pocket, and has an optional key ring attachment to fit on any keychain for use away from the bike. Six bits with eleven functions: 2, 2.5, 3, 4, 5, 6, and 8mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible bits All bits are ED-coated and corrosion-resistant Magnets keep all bits in place and secure Ball detent swivel head tested to over 40Nm of torque Same bits as 8-Bit System and EnCase System multi-tools Replacement parts available Wolf Tooth 6-Bit Hex Wrench Multi-Tool Bike Multi-Tool UPC: 810006805758

by Wolf Tooth

—$59.95

This chainring's tooth profile was developed specifically for Shimano's 12-speed Hyperglide+ chain. Wolf Tooth's CAMO is all about choice - these elliptical chainrings are made from 7075-T6 Aluminum Alloy for lightweight performance. Only compatible with CAMO spiders. Compatible only with Hyperglide+ 12-speed chain Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention Prevents premature ring and chain wear that can come from non-optimized profiles For use with Wolf Tooth CAMO spiders (not compatible with any other chainring mountings) Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Features Wolf Tooth s patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud shedding ability Made from 7075-T6 aluminum for long life Item Specifications Chainring BCD Wolf Tooth CAMO Defined Color Black Drivetrain Speeds 12 keyword search Hyperglide Plus Material Aluminum Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 30 Wolf Tooth CAMO Aluminum Elliptical Hyperglide+ Chainrings Chainring UPC: 810006802467

by Wolf Tooth

—$54.95

This chainring's tooth profile was developed specifically for Shimano's 12-speed Hyperglide+ chain. Wolf Tooth's CAMO is all about choice - these chainrings are made from 7075-T6 Aluminum Alloy for lightweight performance. Only compatible with CAMO spiders Compatible only with Hyperglide+ 12-speed chain Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention Prevents premature ring and chain wear that can come from non-optimized profiles For use with Wolf Tooth CAMO spiders (not compatible with any other chainring mountings) Features Wolf Tooth s patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud shedding ability Made from 7075-T6 aluminum for long life Item Specifications Chainring BCD Wolf Tooth CAMO Defined Color Black Drivetrain Speeds 12 keyword search Hyperglide Plus Material Aluminum Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 34 Wolf Tooth CAMO Aluminum Hyperglide+ Chainrings Chainring UPC: 810006800753

by Wolf Tooth

—$34.95

These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner. 6mm length Made in the US out of 7075-T6 Aluminum Has hex heads on both the bolt and nut for easy installation Max torque of 7-8 Nm with light grease on threads only Item Specifications Color Gun Metal Gray keyword search Wolf Tooth Chainring Bolt Length 6 Material Aluminum Wolf Tooth 1x Chainring Bolt Sets Chainring Bolt UPC: 812719021401

by Wolf Tooth

—$54.95

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. Stainless Steel Bearings provide unparalleled corrosion resistance Highly recommended if your headset will be exposed to wet conditions or sweat Custom molded dual-lip seal on the crown race to protect lower bearing in the toughest conditions Lifetime warranty Item Specifications Bearing Type Cartridge Bearing Type Stainless Steel Color Purple Crown Race 40 S.H.I.S Lower EC44 Wolf Tooth Premium EC Lower Headset Headset Lower UPC: 812719027472

by Wolf Tooth

—$104.95

The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction. 2 Degree Adjustment Long version is designed for headtube lengths between 115 - 140 mm Enduro black oxide coated chromium steel bearing included on both the upper and lower Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately) Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt Item Specifications Bearing Type Cartridge Color Black Crown Race 40 Defined Color Black Lower Stack Height 13 Material Alloy S.H.I.S Lower EC44 S.H.I.S Upper EC44 S.H.I.S. Stem Clamp Diameter 28.6 Threadless Stack Height 28.9 Upper Stack Height 15.9 Wolf Tooth GeoShift Performance Angle Headset Headsets UPC: 810006805338

by Wolf Tooth

—$94.95

Designed to fit Shimano GRX 4-bolt 110 Asymmetric BCD cranksets. The design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. These rings feature Wolf Tooth's Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Compatible with Shimano GRX cranksets including RX600 and RX810 The Powertrac elliptical design means the diameter is that of a chainring 2t bigger Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Use of a clutch-style rear derailleur is recommended Made from 7075-T6 aluminum for long life Item Specifications Chainring BCD 110 Shimano Asymmetric Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Ring Position/Type Single Tooth Count 46 Wolf Tooth Elliptical 110 BCD GRX Chainrings Chainring UPC: 810006801743

by Wolf Tooth

—$20.95

Designed for the XC racers. 5mm of 100% silicone compound provides excellent vibration dampening and superior comfort. 100% Silicone weather resistant material Plastic bar end plugs 5mm thick Item Specifications Color Yellow Defined Color Yellow Flange No Length 133 Lock On No Shape Round Weight 54 Wolf Tooth Razer Grips Grip UPC: 810006801019

by Wolf Tooth

—$94.95

The Wolf Tooth 110 BCD Asymmetric Chainrings are designed for use with Shimano GRX cranks. Chainrings feature Wolf Tooth's patented Drop-Stop design for the best wear life, chain retention, and mud clearance. Compatible with Shimano GRX cranksets including RX600 and RX810 Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Use of a clutch-style rear derailleur is recommended Made from 7075-T6 aluminum for long life Item Specifications Chainring BCD 110 Shimano Asymmetric Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Ring Position/Type Chain Retaining Single Ring Tooth Count 46 Wolf Tooth 110 Asymmetrical BCD Chainrings for Shimano GRX Chainring UPC: 810006801712

by Wolf Tooth

—$79.95

This chainring's tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain. Compatible only with Hyperglide+ chains Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with optimal chain retention Prevents premature ring and chain wear that can come from non-optimized profiles Chainrings fit on the Shimano XTR M9000 and M9020 1x or 2x cranksets Use only the stock Shimano XTR chainring bolts (M7) Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainring BCD 96 Shimano Asymmetric Color Black Defined Color Black Drivetrain Speeds 12 Ring Position/Type Chain Retaining Single Ring Tooth Count 34 Wolf Tooth Shimano XTR M9000 96 BCD Asymmetrical Hyperglide + Chainrings Chainring UPC: 810006800746

by Wolf Tooth

—$24.75

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. Designed and manufactured in Minneapolis, MN USA Fits 1-1/8"" steerers only Made from 6061-T6 Aluminum Item Specifications Color Blue Defined Color Blue Material Aluminum S.H.I.S. Stem Clamp Diameter 28.6 Thickness 15 Wolf Tooth Precision Headset Stack Spacer 5 Pack Headset Stack Spacer UPC: 812719022842

by Wolf Tooth

—$84.95

Wolf Tooth 110 BCD 5-Bolt Drop-Stop ST chainrings are manufactured using premium 7075-T6 aluminum and designed for use with Shimano HG+ and KMC 12-Speed chains. These chainrings are optimized for Gravel, Cyclocross and Road disciplines. Wolf Tooth's patented Drop-Stop ST wide/narrow technology provides maximum contact on the drive side of the wide teeth to spread the load and improves chainring life Narrow side allows clearance for mud and debris which reduces friction Alternating wide/narrow tooth pattern prevents chain derailment Compatible with Shimano HG+ and KMC 12-Speed chains only Requires 6mm chainring bolts (Sold Separately) Item Specifications Chainring BCD 110 Color Black Defined Color Black Drivetrain Speeds 12 Material Aluminum Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 42 Wolf Tooth 110 BCD 5-Bolt Gravel/CX/Road Chainring for 12-Speed Shimano HG+ Chain Chainring UPC: 810006809206

by Wolf Tooth

—$395.95

Resolve rev2 expands upon the original Resolve while adding 34.9 diameter, a 242mm travel option, and new internals for 25% lighter actuation and better self-bleeding. It's lightweight, keeps a low profile, and will perform as expected every time it is needed. It also has a low lifetime cost of ownership because it is covered by Wolf Tooth Right to Repair and is serviceable at home. The Resolve Dropper Post uses a unique, proprietary design with the patented Resolve self-bleeding cartridge at its core. Any air that gets into the fluid chamber is automatically purged with every up/down motion, which means it never sags so there is no need for manual reset or purchase of new cartridges. It has the shortest stack height of any dropper post at 32mm and is one of the lightest dropper posts on the market when looking at grams per millimeter of travel. Designed, developed, and assembled at Wolf Tooth in Minnesota, USA with CNC machined parts 100% user-serviceable by any experienced home bike mechanic 7075 and 7050 aluminum for the structural parts Self-bleeding cartridge that removes air from the fluid chamber with every actuation, while rev2 features even faster self-bleeding when compared to rev1 Short insertion length is vital for smaller bikes, frames with curved seat tubes, and frames with seat tubes that have bottle bosses Cable actuated with infinite height adjustment, lever sold separately Spacers for travel adjustment available individually or as kits Item Specifications Actuation Cable Remote Adjustment Infinite Cable Routing Internal Clamp Style Standard Rails Color Black Defined Color Black Diameter 31.6 Length 587 Material Aluminum Max Height 405 Min Height 274 Offset (mm) 0 Remote Position Left Remote Position Right Travel (mm) 242 Weight 621 Wolf Tooth Wolf Tooth Resolve Dropper Seatpost Rev 2 Dropper Seatpost UPC: 810159400381

by Wolf Tooth

—$365

Resolve rev2 expands upon the original Resolve while adding 34.9 diameter, a 242mm travel option, and new internals for 25% lighter actuation and better self-bleeding. It's lightweight, keeps a low profile, and will perform as expected every time it is needed. It also has a low lifetime cost of ownership because it is covered by Wolf Tooth Right to Repair and is serviceable at home. The Resolve Dropper Post uses a unique, proprietary design with the patented Resolve self-bleeding cartridge at its core. Any air that gets into the fluid chamber is automatically purged with every up/down motion, which means it never sags so there is no need for manual reset or purchase of new cartridges. It has the shortest stack height of any dropper post at 32mm and is one of the lightest dropper posts on the market when looking at grams per millimeter of travel. Designed, developed, and assembled at Wolf Tooth in Minnesota, USA with CNC machined parts 100% user-serviceable by any experienced home bike mechanic 7075 and 7050 aluminum for the structural parts Self-bleeding cartridge that removes air from the fluid chamber with every actuation, while rev2 features even faster self-bleeding when compared to rev1 Short insertion length is vital for smaller bikes, frames with curved seat tubes, and frames with seat tubes that have bottle bosses Cable actuated with infinite height adjustment, lever sold separately Spacers for travel adjustment available individually or as kits Item Specifications Actuation Cable Remote Adjustment Infinite Cable Routing Internal Clamp Style Standard Rails Color Black Defined Color Black Diameter 31.6 Length 423 Material Aluminum Max Height 323 Min Height 192 Offset (mm) 0 Remote Position Left Remote Position Right Travel (mm) 160 Weight 511 Wolf Tooth Wolf Tooth Resolve Dropper Seatpost Rev 2 Dropper Seatpost UPC: 810159400367

by Wolf Tooth

—$79.95

Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 3mm offset is designed for Boost 52mm chainline Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings Not compatible with 9 speed chains If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 3 Round or Oval Round Tooth Count 28 Wolf Tooth RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 810006808186

by Wolf Tooth

—$124.95

Designed for gravel and road racing, and for those looking to optimize each detail in pursuit of speed, Wolf Tooth Aero Chainrings are strong, lightweight, and profiled to mate perfectly with your crankset for a clean, integrated look. Taking advantage of 1x drivetrain systems and wider-range rear cassettes, Aero Chainrings are available in sizes 46T to 52T to provide similar overall range to standard 2x drivetrain configurations. They feature our patented Drop-Stop design for the best wear life, chain retention, and mud clearance. Drop-Stop B is optimized for SRAM Eagle and Flattop chains. Aero Direct Mount Chainrings for SRAM 8-Bolt Cranks replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined 7075-T6 aluminum billet Replaces the direct mount chainring for SRAM AXS cranksets and other cranks that use the 8-bolt mounting standard Compatible with SRAM Direct Mount DUB road cranksets that use the 8-bolt mounting standard or any crankset with a removable spider that also uses the 8-bolt mount Features Wolf Tooth s patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability Chainline is 45mm on standard spindle cranks and 47.5mm on wide spindle cranks for 46-52t chainrings Includes set of 8 custom T20 stainless steel bolts Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM 8-Bolt Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Round or Oval Round Tooth Count 46 Wolf Tooth Aero Direct Mount SRAM 8-Bolt Chainring Direct Mount Chainrings UPC: 812719029360

by Wolf Tooth

—$34.95

Wolf Tooth Performance Headsets are machined out of aircraft grade aluminum and assembled with Black Oxide Cartridge Bearings, balancing quality and price. Black Oxide Bearings are made from chromium steel for high load capacity and durability Custom molded dual-lip seal on the crown race to protect lower bearing in the toughest conditions Item Specifications Bearing Type Black Oxide Steel Color Raw Silver Crown Race 40 Lower Stack Height 12.25 S.H.I.S Lower EC44 Weight 45 Wolf Tooth Performance EC Lower Headset Headset Lower UPC: 810006809794

by Wolf Tooth

—$64.95

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. Stainless steel bearings provide unparalleled corrosion resistance Highly recommended if your headset will be exposed to wet conditions or sweat Ultralight stem cap with integrated spacer, plus an aluminum bolt and a star nut O-ring seal prevents water intrusion around the steerer tube Custom-molded upper lip seal provides additional protection for upper bearing Lifetime warranty Item Specifications Bearing Type Stainless Steel Color Raw Silver Defined Color List Silver S.H.I.S Upper ZS44 S.H.I.S. Stem Clamp Diameter 28.6 Upper Stack Height 6 Wolf Tooth Premium ZS Upper Headset Headset Upper UPC: 810006809756

by Wolf Tooth

—$14.46

It's a stack spacer. It's a top cap. It's both! The Ultralight stem cap is designed specifically for carbon steerers that require that the steer tube extend above the stem. 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only Light-weight and durable 6061-T6 aluminum Item Specifications Color Raw Silver Defined Color Silver Includes Star Nut No S.H.I.S. Stem Clamp Diameter 28.6 Wolf Tooth Ultralight Stem Cap with Integrated Spacer Headset Top Cap UPC: 810006809640

by Wolf Tooth

—$44.95

Wolf Tooth Performance Headsets are machined out of aircraft grade aluminum and assembled with Black Oxide Cartridge Bearings, balancing quality and price. Black Oxide Bearings are made from chromium steel for high load capacity, durability and corrision resistance Ultralight stem cap with integrated spacer, plus an aluminum bolt and a star nut O-ring seal prevents water intrusion around the steerer tube Custom-molded upper lip seal provides additional protection for upper bearing Item Specifications Bearing Type Black Oxide Steel Color Raw Silver Defined Color List Silver S.H.I.S Upper ZS44 S.H.I.S. Stem Clamp Diameter 28.6 Upper Stack Height 6 Wolf Tooth Performance ZS Upper Headset Headset Upper UPC: 810006809732

by Wolf Tooth

—$109.95

The Wolf Tooth EnCase Pump offers easy access, quick use, and reliable performance for mountain, gravel, and fat bike tires. It requires less force per stroke than competitors, making it efficient for high-volume tires. The EnviroLock sealing protects internal components from water and debris. The pump is easily accessible when mounted on a frame, ensuring it remains clean and ready to use. Part of the EnCase System, The pump can store an EnCase System tools. Designed for high-volume tires with less effort per pump stroke Enviro-Lock sealing protects internal components from water and debris Fits EnCase System multi-tools or tubeless tire plug inside the pump Precision machined 6061 aluminum body for long-lasting use Item Specifications Color Black Defined Color Black Includes Gauge No Includes Mount Bracket Yes PSI 70 Valve Compatibility Presta Weight 151 Wolf Tooth EnCase Pump Frame Pump UPC: 810159400039

by Wolf Tooth

—$199.95

Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris. 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer 118mm long x 102mm wide, creating a large platform size that provides strong foot support Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal Shorter 3mm pins are available separately as replacement parts to customize the convexity of the pedal Item Specifications Color Ultraviolet Purple Defined Color Purple Pedal Body Material Aluminum Pedal Spindle 9/16" Pedal Type Platform Spindle Material 17-4 PH Stainless Steel Wolf Tooth Ripsaw Aluminum Pedals Pedals UPC: 812719029261

by Wolf Tooth

—$31.95

These Presta valve stems are compatible with tubeless rims and tires for road, gravel, mountain, and fat bike wheels. The kit includes two Presta valve stems, two machined aluminum caps, two nuts, two extra valve cores, a unique machined aluminum valve core remover, and three rubber base options for compatibility with more rim internal shapes. Slotted stem base for compatibility with tire inserts Oversized stem nut for better sealing and easier removal Stem threaded below rubber seal for better performance on single wall rims Three rubber bases included: two types of cones (one installed), one channel Available in 44mm or 60mm stem length options Replacement parts available via Wolf Tooth Right To Repair, including cap kit with two caps, nut kit with two nuts, and valve cores Wolf Tooth Tubeless Valve Stem Kit Tubeless Valves UPC: 812719029100

by Wolf Tooth

—$54.95

These Wolf Tooth aluminum single speed cogs feature extra tall teeth for reliable chain retention when using chain tensioners. Item weight: 23.5g Crafted with strong and lightweight premium 7075-T6 aluminum Optimized for use with 9,10,11 speed chains, but suitable for use with some 12-speed chains Reversible and 4.5mm wide at the base to help prevent cog from damaging your freehub body Fits Shimano Hyperglide style freehub splines Not compatible with Shimano Microspline or SRAM XD freehubs Not compatible with Campagnolo 13-speed chains Item Specifications Cassette Body Type Shimano HG Defined Color Gold Drivetrain Speeds Single Speed 3/32" Material Aluminum Tooth Count 20 Wolf Tooth Aluminum Single Speed Cog Driver and Single Cog UPC: 812719023030

by Wolf Tooth

—$54.95

These Wolf Tooth aluminum single speed cogs feature extra tall teeth for reliable chain retention when using chain tensioners. Item weight: 23.5g Crafted with strong and lightweight premium 7075-T6 aluminum Optimized for use with 9,10,11 speed chains, but suitable for use with some 12-speed chains Reversible and 4.5mm wide at the base to help prevent cog from damaging your freehub body Fits Shimano Hyperglide style freehub splines Not compatible with Shimano Microspline or SRAM XD freehubs Not compatible with Campagnolo 13-speed chains Item Specifications Cassette Body Type Shimano HG Defined Color Orange Drivetrain Speeds Single Speed 3/32" Material Aluminum Tooth Count 20 Wolf Tooth Aluminum Single Speed Cog Driver and Single Cog UPC: 812719026307

by Wolf Tooth

—$31.95

These Presta valve stems are compatible with tubeless rims and tires for road, gravel, mountain, and fat bike wheels. The kit includes two Presta valve stems, two machined aluminum caps, two nuts, two extra valve cores, a unique machined aluminum valve core remover, and three rubber base options for compatibility with more rim internal shapes. Slotted stem base for compatibility with tire inserts Oversized stem nut for better sealing and easier removal Stem threaded below rubber seal for better performance on single wall rims Three rubber bases included: two types of cones (one installed), one channel Available in 44mm or 60mm stem length options Replacement parts available via Wolf Tooth Right To Repair, including cap kit with two caps, nut kit with two nuts, and valve cores Wolf Tooth Tubeless Valve Stem Kit Tubeless Valves UPC: 812719029230

by Wolf Tooth

—$84.95

These Wolf Tooth direct mount rings are designed for SRAM cranks with 8-bolt mounting. This chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings Compatible with SRAM AXS cranksets and other cranks that use the 8-bolt mounting Includes set of 8 custom T20 stainless steel bolts Made from 7075-T6 aluminum for long life Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM 8-Bolt Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 0 Round or Oval Round Tooth Count 32 Wolf Tooth SRAM 8-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006808940

by Wolf Tooth

—$84.95

Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 3mm offset is designed for Boost 52mm chainline Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings Not compatible with 9 speed chains If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Round or Oval Round Tooth Count 36 Wolf Tooth RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 810006808223

by Wolf Tooth

—$69.95

Featuring the proprietary mud clearing Drop-Stop tooth design, these rings are designed to fit any 104 BCD crankset. Made in Minneapolis, MN with exceptional chain retention in mind, these chainrings are best paired with a clutch-style rear derailleur. Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Use of a clutch-style rear derailleur is recommended Made from 7075-T6 aluminum for long life Item Specifications Chainring BCD 104 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 38 Wolf Tooth 104 BCD Chainrings Chainring UPC: 810006807899

by Wolf Tooth

—$84.95

Wolf Tooth chainrings designed for Shimano direct mount cranksets. This chainring is crafted with premium 7075-T6 aluminum and features the patented Drop-Stop design for the best wear life, chain retention and mud clearance. Drop-Stop B chainrings are designed for use with all 9, 10, and 11-speed chains or 12-speed SRAM Eagle, SRAM Road and Tranmission (T-Type) Flattop Chains, KMC, Connex, Campagnolo or Wippermann chains Not compatible with 12-speed Shimano Hyperglide+ or 13-Speed Campagnolo chains 3mm offset is designed for boost cranksets (52mm chainline) Designed for use with Shimano MTB cranksets such as XTR M9100, XT M8100, and SLX M7100 Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount Shimano Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 3 Round or Oval Round Tooth Count 32 Wolf Tooth Shimano Direct Mount Chainrings Direct Mount Chainrings UPC: 810006808285

by Wolf Tooth

—$71.95

Designed for 104 BCD Mountain Cranksets. The proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the benefits of an oval ring without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life These rings are threaded, use with 10mm chainring bolts 48mm - 50mm chainline depending on the crankset Item Specifications Chainring BCD 104 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 34 Wolf Tooth Elliptical 104 BCD Chainrings Chainring UPC: 810006808162

by Wolf Tooth

—$84.95

Wolf Tooth Direct Mount Chainrings for Trek TQ E-Bike Motors are compatible with all Boost and Super Boost bikes that use the Trek TQ Motor. This brings a lightweight chainring with patented Drop-Stop technology to e-bike chainrings for the first time. Direct Mount Chainrings for Trek TQ E-Bike Motors are machined with 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains 55 mm chainline Item Specifications Color Black Defined Color Black Designed for ebike Yes Tooth Count 32 Wolf Tooth Trek TQ Direct Mount Ebike Chainring eBike Chainrings and Sprockets UPC: 810006807806

by Wolf Tooth

—$84.95

Wolf Tooth Direct Mount Chainrings for Shimano EP-8 E-Bike Motors are compatible with all Boost and Super Boost bikes that use the Shimano EP-8 Motor. This brings a lightweight chainring with patented Drop-Stop technology to e-bike chainrings for the first time. Direct Mount Chainrings for Shimano EP-8 E-Bike Motors are machined with 7075-T6 aluminum at Wolf Tooth in Minnesota, USA.Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains Item Specifications Color Black Defined Color Black Designed for ebike Yes Tooth Count 34 Wolf Tooth Shimano EP-8 Direct Mount Ebike Chainring eBike Chainrings and Sprockets UPC: 810006808513

by Wolf Tooth

—$199.95

Waveform Pedals are designed for all-mountain riding, from XC to downhill. Available in two different sizes, proportionally scaled to provide a supportive platform that's shaped to match the footprint of your shoe. They have a slim, dual-concave profile that is 14mm thick at the perimeter and just 12.5mm thick in the center, cradling your foot for optimal pedal feel. Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. The design also features a large, tapered leading edge to deflect pedal strikes on rough terrain. A custom radial seal protects three fully sealed cartridge bearings for low-friction riding in all conditions. Proportionally designed platform, shaped to match shoe profile Slim, concave profile with large tapered leading edge to deflect pedal strikes 3 low friction, fully sealed cartridge bearings and 1 Igus bushing per pedal V-ring rotary seal to protect against contamination 11 stainless steel, rear-loading pins per side (pins 4.5mm tall), includes 6 extra grip pins Fully serviceable with a set of hex keys, no special tools needed Item Specifications Color Olive Defined Color Green Pedal Body Material Aluminum Pedal Spindle 9/16" Pedal Type Platform Spindle Material 17-4 PH Stainless Steel Wolf Tooth Waveform Pedals Pedals UPC: 810006807608

by Wolf Tooth

—$365

The Resolve Dropper Post uses a unique, proprietary design with the patented Resolve self-bleeding cartridge at its core. Any air that gets into the fluid chamber is automatically purged with every up/down motion, which means it never sags so there is no need for manual reset or purchase of new cartridges. It has the shortest stack height of any dropper post at 32mm and is one of the lightest dropper posts on the market when looking at grams per millimeter of travel. Designed, developed, and assembled at Wolf Tooth in Minnesota, USA with CNC machined parts 100% user-serviceable by any experienced home bike mechanic 7075 and 7050 aluminum for the structural parts Self-bleeding cartridge that removes air from the fluid chamber with every actuation Short insertion length is vital for smaller bikes, frames with curved seat tubes, and frames with seat tubes that have bottle bosses Cable actuated with infinite height adjustment, lever sold separately Spacers for travel adjustment available individually or as kits Item Specifications Actuation Cable Remote Adjustment Infinite Cable Routing Internal Clamp Style Standard Rails Color Black Defined Color Black Diameter 30.9 Length 423 Material Aluminum Max Height 323 Min Height 192 Offset (mm) 0 Remote Position Left Remote Position Right Travel (mm) 160 Weight 490 Wolf Tooth Wolf Tooth Resolve Dropper Seatpost Rev 1 Dropper Seatpost UPC: 810006806250

by Wolf Tooth