Wolf Tooth

—$139.95

Wolf Tooth T47 Internal bottom Brackets are engineered to be smooth, durable, lightweight, fast, and user-serviceable. Their ground-up design features custom bearings, seals, bushings, and cups, which eliminate creaking and balance best-in-class weather sealing with optimized bearing radial compression, alignment, and preload for low drag. The Wolf Tooth Bottom Bracket bearings feature custom designed balls and races that are made from a hardened chrome bearing steel which has a higher surface hardness than stainless to improve the durability, reduce spinning resistance, and noise. An ACOSUR ZNA coating has also been applied to the race to provide corrosion resistance that is equal to or better than stainless steel after a 500-hour saltwater test. Bearing material paired with an extensive sealing system and the elimination of metal-on-metal contact means Wolf Tooth Bottom Brackets deliver superior performance in all conditions. Wolf Tooth bottom brackets are designed, engineered, machined and assembled in-house at Wolf Tooth HQ in Minnesota, USA. Bottom bracket also includeds: (2) 2.5mm shell spacers, (2) 0.5mm spindle spacers, (2) 1mm spindle spacers, (1) 3mm spindle spacer, (1) 5mm spindle spacer, and (1) 7.5mm spindle spacer Best-in-class sealing achieved by grouping a spindle o-ring, seals on the bearing/bushing gutter, inner and outer low contact bearing seals, shell o-rings, and a labyrinth-style end cap to ensure your bottom bracket will run smoothly no matter what conditions you ride in Custom bushings separate the bearing inner race and crank spindle to eliminate metal-on-metal contact, the leading cause of bottom bracket creaks, while also aiding in bearing longevity with an interface to the bearing gutter seal for maximum weatherproofing Custom AlSl 52100 chrome bearing steel hardened to Rc 61-66 reduces friction for smooth pedaling with ZNA corrosion-resistant coating Adjustable-width design allows the same shell to be used for 85.5mm - 92mm width T47 Internal Bottom Brackets Easy installation and removal using a standard spline 52-16 bottom bracket tool (Sold separately) Item Specifications BB Shell Width (mm) 86 BB Shell Width (mm) 92 BB/Frame Interface T47 Bottom Bracket Shell I.D. 47 Defined Color Purple Spindle Interface Type SRAM DUB Weight 96 Wolf Tooth T47 Internal Bottom Brackets Bottom Brackets UPC: 810159401449

by Wolf Tooth

—$139.95

Wolf Tooth T47 Internal bottom Brackets are engineered to be smooth, durable, lightweight, fast, and user-serviceable. Their ground-up design features custom bearings, seals, bushings, and cups, which eliminate creaking and balance best-in-class weather sealing with optimized bearing radial compression, alignment, and preload for low drag. The Wolf Tooth Bottom Bracket bearings feature custom designed balls and races that are made from a hardened chrome bearing steel which has a higher surface hardness than stainless to improve the durability, reduce spinning resistance, and noise. An ACOSUR ZNA coating has also been applied to the race to provide corrosion resistance that is equal to or better than stainless steel after a 500-hour saltwater test. Bearing material paired with an extensive sealing system and the elimination of metal-on-metal contact means Wolf Tooth Bottom Brackets deliver superior performance in all conditions. Wolf Tooth bottom brackets are designed, engineered, machined and assembled in-house at Wolf Tooth HQ in Minnesota, USA. Bottom bracket also includeds: (2) 2.5mm shell spacers, (2) 0.5mm spindle spacers, (2) 1mm spindle spacers, (1) 3mm spindle spacer, (1) 5mm spindle spacer, and (1) 7.5mm spindle spacer Best-in-class sealing achieved by grouping a spindle o-ring, seals on the bearing/bushing gutter, inner and outer low contact bearing seals, shell o-rings, and a labyrinth-style end cap to ensure your bottom bracket will run smoothly no matter what conditions you ride in Custom bushings separate the bearing inner race and crank spindle to eliminate metal-on-metal contact, the leading cause of bottom bracket creaks, while also aiding in bearing longevity with an interface to the bearing gutter seal for maximum weatherproofing Custom AlSl 52100 chrome bearing steel hardened to Rc 61-66 reduces friction for smooth pedaling with ZNA corrosion-resistant coating Adjustable-width design allows the same shell to be used for 85.5mm - 92mm width T47 Internal Bottom Brackets Easy installation and removal using a standard spline 52-16 bottom bracket tool (Sold separately) Item Specifications BB Shell Width (mm) 86 BB Shell Width (mm) 92 BB/Frame Interface T47 Bottom Bracket Shell I.D. 47 Defined Color Silver Spindle Interface Type SRAM DUB Weight 96 Wolf Tooth T47 Internal Bottom Brackets Bottom Brackets UPC: 810159401456

by Wolf Tooth

—$139.95

Wolf Tooth T47 Internal bottom Brackets are engineered to be smooth, durable, lightweight, fast, and user-serviceable. Their ground-up design features custom bearings, seals, bushings, and cups, which eliminate creaking and balance best-in-class weather sealing with optimized bearing radial compression, alignment, and preload for low drag. The Wolf Tooth Bottom Bracket bearings feature custom designed balls and races that are made from a hardened chrome bearing steel which has a higher surface hardness than stainless to improve the durability, reduce spinning resistance, and noise. An ACOSUR ZNA coating has also been applied to the race to provide corrosion resistance that is equal to or better than stainless steel after a 500-hour saltwater test. Bearing material paired with an extensive sealing system and the elimination of metal-on-metal contact means Wolf Tooth Bottom Brackets deliver superior performance in all conditions. Wolf Tooth bottom brackets are designed, engineered, machined and assembled in-house at Wolf Tooth HQ in Minnesota, USA. Bottom bracket also includeds: (2) 2.5mm shell spacers, (2) 0.5mm spindle spacers, (2) 1mm spindle spacers, (1) 2mm spindle spacer, (1) 3mm spindle spacer, and (1) 5mm spindle spacer Best-in-class sealing achieved by grouping a spindle o-ring, seals on the bearing/bushing gutter, inner and outer low contact bearing seals, shell o-rings, and a labyrinth-style end cap to ensure your bottom bracket will run smoothly no matter what conditions you ride in Custom bushings separate the bearing inner race and crank spindle to eliminate metal-on-metal contact, the leading cause of bottom bracket creaks, while also aiding in bearing longevity with an interface to the bearing gutter seal for maximum weatherproofing Custom AlSl 52100 chrome bearing steel hardened to Rc 61-66 reduces friction for smooth pedaling with ZNA corrosion-resistant coating Adjustable-width design allows the same shell to be used for 85.5mm - 92mm width T47 Internal Bottom Brackets Easy installation and removal using a standard spline 52-16 bottom bracket tool (Sold separately) Item Specifications BB Shell Width (mm) 86 BB Shell Width (mm) 92 BB/Frame Interface T47 Bottom Bracket Shell I.D. 47 Defined Color Black Spindle Interface Type 386 EVO Spindle Interface Type 392 EVO Spindle Interface Type RaceFace/Easton CINCH Weight 91 Wolf Tooth T47 Internal Bottom Brackets Bottom Brackets UPC: 810159401463

by Wolf Tooth

—$139.95

Wolf Tooth T47 Internal bottom Brackets are engineered to be smooth, durable, lightweight, fast, and user-serviceable. Their ground-up design features custom bearings, seals, bushings, and cups, which eliminate creaking and balance best-in-class weather sealing with optimized bearing radial compression, alignment, and preload for low drag. The Wolf Tooth Bottom Bracket bearings feature custom designed balls and races that are made from a hardened chrome bearing steel which has a higher surface hardness than stainless to improve the durability, reduce spinning resistance, and noise. An ACOSUR ZNA coating has also been applied to the race to provide corrosion resistance that is equal to or better than stainless steel after a 500-hour saltwater test. Bearing material paired with an extensive sealing system and the elimination of metal-on-metal contact means Wolf Tooth Bottom Brackets deliver superior performance in all conditions. Wolf Tooth bottom brackets are designed, engineered, machined and assembled in-house at Wolf Tooth HQ in Minnesota, USA. Bottom bracket also includeds: (2) 2.5mm shell spacers, (2) 0.5mm spindle spacers, (2) 1mm spindle spacers, (1) 2mm spindle spacer, (1) 3mm spindle spacer, and (1) 5mm spindle spacer Best-in-class sealing achieved by grouping a spindle o-ring, seals on the bearing/bushing gutter, inner and outer low contact bearing seals, shell o-rings, and a labyrinth-style end cap to ensure your bottom bracket will run smoothly no matter what conditions you ride in Custom bushings separate the bearing inner race and crank spindle to eliminate metal-on-metal contact, the leading cause of bottom bracket creaks, while also aiding in bearing longevity with an interface to the bearing gutter seal for maximum weatherproofing Custom AlSl 52100 chrome bearing steel hardened to Rc 61-66 reduces friction for smooth pedaling with ZNA corrosion-resistant coating Adjustable-width design allows the same shell to be used for 85.5mm - 92mm width T47 Internal Bottom Brackets Easy installation and removal using a standard spline 52-16 bottom bracket tool (Sold separately) Item Specifications BB Shell Width (mm) 86 BB Shell Width (mm) 92 BB/Frame Interface T47 Bottom Bracket Shell I.D. 47 Defined Color Silver Spindle Interface Type 386 EVO Spindle Interface Type 392 EVO Spindle Interface Type RaceFace/Easton CINCH Weight 91 Wolf Tooth T47 Internal Bottom Brackets Bottom Brackets UPC: 810159401494

by Wolf Tooth

—$139.95

Wolf Tooth T47 Internal bottom Brackets are engineered to be smooth, durable, lightweight, fast, and user-serviceable. Their ground-up design features custom bearings, seals, bushings, and cups, which eliminate creaking and balance best-in-class weather sealing with optimized bearing radial compression, alignment, and preload for low drag. The Wolf Tooth Bottom Bracket bearings feature custom designed balls and races that are made from a hardened chrome bearing steel which has a higher surface hardness than stainless to improve the durability, reduce spinning resistance, and noise. An ACOSUR ZNA coating has also been applied to the race to provide corrosion resistance that is equal to or better than stainless steel after a 500-hour saltwater test. Bearing material paired with an extensive sealing system and the elimination of metal-on-metal contact means Wolf Tooth Bottom Brackets deliver superior performance in all conditions. Wolf Tooth bottom brackets are designed, engineered, machined and assembled in-house at Wolf Tooth HQ in Minnesota, USA. Bottom bracket also includeds: (2) 2.5mm shell spacers, (2) 0.5mm spindle spacers, (2) 1mm spindle spacers, (1) 2mm spindle spacer, (1) 3mm spindle spacer, and (1) 5mm spindle spacer Best-in-class sealing achieved by grouping a spindle o-ring, seals on the bearing/bushing gutter, inner and outer low contact bearing seals, shell o-rings, and a labyrinth-style end cap to ensure your bottom bracket will run smoothly no matter what conditions you ride in Custom bushings separate the bearing inner race and crank spindle to eliminate metal-on-metal contact, the leading cause of bottom bracket creaks, while also aiding in bearing longevity with an interface to the bearing gutter seal for maximum weatherproofing Custom AlSl 52100 chrome bearing steel hardened to Rc 61-66 reduces friction for smooth pedaling with ZNA corrosion-resistant coating Adjustable-width design allows the same shell to be used for 85.5mm - 92mm width T47 Internal Bottom Brackets Easy installation and removal using a standard spline 52-16 bottom bracket tool (Sold separately) Item Specifications BB Shell Width (mm) 86 BB Shell Width (mm) 92 BB/Frame Interface T47 Bottom Bracket Shell I.D. 47 Defined Color Purple Spindle Interface Type 386 EVO Spindle Interface Type 392 EVO Spindle Interface Type RaceFace/Easton CINCH Weight 91 Wolf Tooth T47 Internal Bottom Brackets Bottom Brackets UPC: 810159401487

by Wolf Tooth

—$25.95

The precision-engineered Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. M6 stainless steel bolt with integrated washer Tool interface - 4mm hex key Item Specifications Color Ultraviolet Purple Defined Color Purple Diameter 29.8 keyword search Color Pop Purple Material Aluminum Type Bolt-On Wolf Tooth Seatpost Clamp Seatpost Clamp UPC: 810159400930

by Wolf Tooth

—$34.95

These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner. 6mm length Made in the US out of 7075-T6 Aluminum Has hex heads on both the bolt and nut for easy installation Max torque of 7-8 Nm with light grease on threads only Item Specifications Color Ultraviolet Purple Defined Color Purple Length 6 Material Aluminum Wolf Tooth 1x Chainring Bolt Sets Chainring Bolt UPC: 810159400886

by Wolf Tooth

—$89.95

These Wolf Tooth Elliptical direct mount rings are designed for SRAM cranks with 8-bolt mounting. This chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings Compatible with SRAM AXS cranksets and other cranks that use the 8-bolt mounting Includes set of 8 custom T20 stainless steel bolts Made from 7075-T6 aluminum for long life Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM 8-Bolt Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Round or Oval Oval Tooth Count 42 Wolf Tooth SRAM Elliptical 8-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006806090

by Wolf Tooth

—$89.95

These Wolf Tooth Elliptical direct mount rings are designed for SRAM cranks with 8-bolt mounting. This chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings Compatible with SRAM AXS cranksets and other cranks that use the 8-bolt mounting Includes set of 8 custom T20 stainless steel bolts Made from 7075-T6 aluminum for long life Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM 8-Bolt Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Round or Oval Oval Tooth Count 38 Wolf Tooth SRAM Elliptical 8-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006806076

by Wolf Tooth

—$94.95

These Wolf Tooth direct mount rings are designed for SRAM cranks with 8-bolt mounting. This chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings Compatible with SRAM AXS cranksets and other cranks that use the 8-bolt mounting Includes set of 8 custom T20 stainless steel bolts Made from 7075-T6 aluminum for long life Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM 8-Bolt Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 6 Round or Oval Round Tooth Count 44 Wolf Tooth SRAM 8-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006802894

by Wolf Tooth

—$39.95

Wolf Tooth Performance Headsets are machined out of aircraft grade aluminum and assembled with Black Oxide Cartridge Bearings, balancing quality and price. Black Oxide Bearings are made from chromium steel for high load capacity and durability Custom molded dual-lip seal on the crown race to protect lower bearing in the toughest conditions Item Specifications Bearing Type Black Oxide Steel Color Ultraviolet Purple Crown Race 30 Lower Stack Height 12.25 S.H.I.S Lower EC34 Weight 37 Wolf Tooth Performance EC Lower Headset Headset Lower UPC: 810159401135

by Wolf Tooth

—$59.95

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. Stainless Steel Bearings provide unparalleled corrosion resistance Highly recommended if your headset will be exposed to wet conditions or sweat Custom molded dual-lip seal on the crown race to protect lower bearing in the toughest conditions Lifetime warranty Item Specifications Bearing Type Stainless Steel Color Ultraviolet Purple Crown Race 30 Lower Stack Height 12.25 S.H.I.S Lower EC34 Weight 37 Wolf Tooth Premium EC Lower Headset Headset Lower UPC: 810159401128

by Wolf Tooth

—$39.95

Wolf Tooth Performance Headsets are machined out of aircraft grade aluminum and assembled with Black Oxide Cartridge Bearings, balancing quality and price. Black Oxide Bearings are made from chromium steel for high load capacity and durability Custom-molded dual-lip seal on the crown race protects lower bearing in the toughest conditions Item Specifications Bearing Type Black Oxide Steel Color Ultraviolet Purple Crown Race 40 S.H.I.S Lower ZS56 Weight 58 Wolf Tooth Performance ZS Lower Headset Headset Lower UPC: 810159401098

by Wolf Tooth

—$69.95

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. Stainless steel bearings provide unparalleled corrosion resistance Highly recommended if your headset will be exposed to wet conditions or sweat Ultralight stem cap with integrated spacer, plus an aluminum bolt and a star nut 5mm top cover = 16mm total stack O-ring seal prevents water intrusion around the steerer tube Custom-molded upper lip seal provides additional protection for upper bearing Lifetime warranty Item Specifications Bearing Type Black Oxide Steel Color Ultraviolet Purple Defined Color List Purple S.H.I.S Upper EC34 S.H.I.S. Stem Clamp Diameter 28.6 Upper Stack Height 16 Weight 64 Wolf Tooth Premium EC Upper Headset Headset Upper UPC: 810159401104

by Wolf Tooth

—$49.95

Wolf Tooth Performance Headsets are machined out of aircraft grade aluminum and assembled with Black Oxide Cartridge Bearings, balancing quality and price. Black Oxide Bearings are made from chromium steel for high load capacity, durability and corrision resistance Ultralight stem cap with integrated spacer, plus an aluminum bolt and a star nut 5mm top cover = 16mm total stack O-ring seal prevents water intrusion around the steerer tube Custom-molded upper lip seal provides additional protection for upper bearing Item Specifications Bearing Type Stainless Steel Color Ultraviolet Purple Defined Color List Purple S.H.I.S Upper EC34 S.H.I.S. Stem Clamp Diameter 28.6 Upper Stack Height 16 Weight 64 Wolf Tooth Performance EC Upper Headset Headset Upper UPC: 810159401111

by Wolf Tooth

—$16.16

It's a stack spacer. It's a top cap. It's both! The Ultralight stem cap is designed specifically for carbon steerers that require that the steer tube extend above the stem. 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only Light-weight and durable 6061-T6 aluminum Item Specifications Color Ultraviolet Purple Defined Color Purple Includes Star Nut No S.H.I.S. Stem Clamp Diameter 28.6 Wolf Tooth Ultralight Stem Cap with Integrated Spacer Headset Top Cap UPC: 810159401043

by Wolf Tooth

—$69.95

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. Stainless steel bearings provide unparalleled corrosion resistance Highly recommended if your headset will be exposed to wet conditions or sweat Ultralight stem cap with integrated spacer, plus an aluminum bolt and a star nut O-ring seal prevents water intrusion around the steerer tube Custom-molded upper lip seal provides additional protection for upper bearing Lifetime warranty Item Specifications Bearing Type Stainless Steel Color Ultraviolet Purple Defined Color List Purple S.H.I.S Upper ZS44 S.H.I.S. Stem Clamp Diameter 28.6 Upper Stack Height 6 Weight 58 Wolf Tooth Premium ZS Upper Headset Headset Upper UPC: 810159401067

by Wolf Tooth

—$59.95

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. Stainless Steel Bearings provide unparalleled corrosion resistance Highly recommended if your headset will be exposed to wet conditions or sweat Custom-molded dual-lip seal on the crown race protects lower bearing in the toughest conditions Lifetime warranty Item Specifications Bearing Type Stainless Steel Color Ultraviolet Purple Crown Race 40 S.H.I.S Lower ZS56 Weight 58 Wolf Tooth Premium ZS Lower Headset Headset Lower UPC: 810159401081

by Wolf Tooth

—$64.95

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. Stainless steel bearings provide unparalleled corrosion resistance Highly recommended if your headset will be exposed to wet conditions or sweat Ultralight stem cap with integrated spacer, plus an aluminum bolt and a star nut O-ring seal prevents water intrusion around the steerer tube Custom-molded upper lip seal provides additional protection for upper bearing Lifetime warranty Item Specifications Bearing Type Stainless Steel Color Ultraviolet Purple Defined Color List Purple S.H.I.S Upper IS41 S.H.I.S. Stem Clamp Diameter 28.6 Upper Stack Height 7 Weight 52 Wolf Tooth Premium IS Upper Headset Headset Upper UPC: 810159401166

by Wolf Tooth

—$59.95

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. Stainless Steel Bearings provide unparalleled corrosion resistance Highly recommended if your headset will be exposed to wet conditions or sweat Custom molded dual-lip seal on the crown race to protect lower bearing in the toughest conditions Lifetime warranty Item Specifications Bearing Type Stainless Steel Color Ultraviolet Purple Crown Race 40 Lower Stack Height 12.25 S.H.I.S Lower EC44 Weight 45 Wolf Tooth Premium EC Lower Headset Headset Lower UPC: 810159401142

by Wolf Tooth

—$36.95

Made in the USA, BlingKits add a dash of style and color to any bike in an easy to manage package. Includes a 3mm, 5mm,10mm,15mm headset spacer and ultralight integrated 5mm top cap Also includes 2x sets of matching anodized bottle cage bolts (for use with bottle cages only) Included longer black aluminum top cap bolt should be used Compatible with 1-1/8" top (straight 1-1/8" or 1-1/2" to 1-1/8" taper) steerer tubes only Item Specifications Color Ultraviolet Purple Defined Color Purple Material Aluminum S.H.I.S. Stem Clamp Diameter 28.6 Wolf Tooth Headset BlingKit Headset Stack Spacer UPC: 810159401180

by Wolf Tooth

—$219.95

Wolf Tooth Premium Internal EC44 Headsets were developed for frames using the ENVE IN-Route System of cable integration with a 44mm head tube. It was made for cyclists who want a clean, aero cockpit that keeps cables and brake lines out of sight. Wolf Tooth headsets are machined with aircraft-grade 6061 aluminum at Wolf Tooth in Minnesota, USA. Designed for the ENVE IN-Route System with a 44mm straight headtube and a 1-1/8 to 1.5 tapered steerer tube (FITS ONLY ENVE In-Route System) This Internal headset helps reduce aerodynamic drag by hiding cables away from airflow, and presents a svelte profile with its ultra-low 15.8mm upper and 12.25mm lower stack height Features Wolf Tooth's best-in-class triple-sealed system to protect the premium Enduro stainless steel bearings from the elements Internal o-ring top cap seal prevents water intrusion around the steerer tube Uses the largest possible ball size and are filled with high-pressure waterproof lubricant Item Specifications Bearing Type Stainless Steel Color Blue Crown Race 40 Defined Color Blue Lower Stack Height 12.25 Material Aluminum S.H.I.S Lower EC44 S.H.I.S Upper EC44 Upper Stack Height 15.8 Weight 116 Wolf Tooth Premium Internal Headset for Enve In-Route System Headsets

by Wolf Tooth

—$219.95

Wolf Tooth Premium Internal EC44 Headsets were developed for frames using the ENVE IN-Route System of cable integration with a 44mm head tube. It was made for cyclists who want a clean, aero cockpit that keeps cables and brake lines out of sight. Wolf Tooth headsets are machined with aircraft-grade 6061 aluminum at Wolf Tooth in Minnesota, USA. Designed for the ENVE IN-Route System with a 44mm straight headtube and a 1-1/8 to 1.5 tapered steerer tube (FITS ONLY ENVE In-Route System) This Internal headset helps reduce aerodynamic drag by hiding cables away from airflow, and presents a svelte profile with its ultra-low 15.8mm upper and 12.25mm lower stack height Features Wolf Tooth's best-in-class triple-sealed system to protect the premium Enduro stainless steel bearings from the elements Internal o-ring top cap seal prevents water intrusion around the steerer tube Uses the largest possible ball size and are filled with high-pressure waterproof lubricant Item Specifications Bearing Type Stainless Steel Color Purple Crown Race 40 Defined Color Purple Lower Stack Height 12.25 Material Aluminum S.H.I.S Lower EC44 S.H.I.S Upper EC44 Upper Stack Height 15.8 Weight 116 Wolf Tooth Premium Internal Headset for Enve In-Route System Headsets UPC: 810159400640

by Wolf Tooth

—$219.95

Wolf Tooth Premium Internal EC44 Headsets were developed for frames using the ENVE IN-Route System of cable integration with a 44mm head tube. It was made for cyclists who want a clean, aero cockpit that keeps cables and brake lines out of sight. Wolf Tooth headsets are machined with aircraft-grade 6061 aluminum at Wolf Tooth in Minnesota, USA. Designed for the ENVE IN-Route System with a 44mm straight headtube and a 1-1/8 to 1.5 tapered steerer tube (FITS ONLY ENVE In-Route System) This Internal headset helps reduce aerodynamic drag by hiding cables away from airflow, and presents a svelte profile with its ultra-low 15.8mm upper and 12.25mm lower stack height Features Wolf Tooth's best-in-class triple-sealed system to protect the premium Enduro stainless steel bearings from the elements Internal o-ring top cap seal prevents water intrusion around the steerer tube Uses the largest possible ball size and are filled with high-pressure waterproof lubricant Item Specifications Bearing Type Stainless Steel Color Raw Silver Crown Race 40 Defined Color Silver Lower Stack Height 12.25 Material Aluminum S.H.I.S Lower EC44 S.H.I.S Upper EC44 Upper Stack Height 15.8 Weight 116 Wolf Tooth Premium Internal Headset for Enve In-Route System Headsets UPC: 810159400657

by Wolf Tooth

—$219.95

Wolf Tooth Premium Internal EC44 Headsets were developed for frames using the ENVE IN-Route System of cable integration with a 44mm head tube. It was made for cyclists who want a clean, aero cockpit that keeps cables and brake lines out of sight. Wolf Tooth headsets are machined with aircraft-grade 6061 aluminum at Wolf Tooth in Minnesota, USA. Designed for the ENVE IN-Route System with a 44mm straight headtube and a 1-1/8 to 1.5 tapered steerer tube (FITS ONLY ENVE In-Route System) This Internal headset helps reduce aerodynamic drag by hiding cables away from airflow, and presents a svelte profile with its ultra-low 15.8mm upper and 12.25mm lower stack height Features Wolf Tooth's best-in-class triple-sealed system to protect the premium Enduro stainless steel bearings from the elements Internal o-ring top cap seal prevents water intrusion around the steerer tube Uses the largest possible ball size and are filled with high-pressure waterproof lubricant Item Specifications Bearing Type Stainless Steel Color Red Crown Race 40 Defined Color Red Lower Stack Height 12.25 Material Aluminum S.H.I.S Lower EC44 S.H.I.S Upper EC44 Upper Stack Height 15.8 Weight 116 Wolf Tooth Premium Internal Headset for Enve In-Route System Headsets

by Wolf Tooth

—$219.95

Wolf Tooth Premium Internal EC44 Headsets were developed for frames using the ENVE IN-Route System of cable integration with a 44mm head tube. It was made for cyclists who want a clean, aero cockpit that keeps cables and brake lines out of sight. Wolf Tooth headsets are machined with aircraft-grade 6061 aluminum at Wolf Tooth in Minnesota, USA. Designed for the ENVE IN-Route System with a 44mm straight headtube and a 1-1/8 to 1.5 tapered steerer tube (FITS ONLY ENVE In-Route System) This Internal headset helps reduce aerodynamic drag by hiding cables away from airflow, and presents a svelte profile with its ultra-low 15.8mm upper and 12.25mm lower stack height Features Wolf Tooth's best-in-class triple-sealed system to protect the premium Enduro stainless steel bearings from the elements Internal o-ring top cap seal prevents water intrusion around the steerer tube Uses the largest possible ball size and are filled with high-pressure waterproof lubricant Item Specifications Bearing Type Stainless Steel Color Orange Crown Race 40 Defined Color Orange Lower Stack Height 12.25 Material Aluminum S.H.I.S Lower EC44 S.H.I.S Upper EC44 Upper Stack Height 15.8 Weight 116 Wolf Tooth Premium Internal Headset for Enve In-Route System Headsets UPC: 810159400633

by Wolf Tooth

—$95.95

Wolf Tooth 110 BCD 5-Bolt Drop-Stop ST chainrings are manufactured using premium 7075-T6 aluminum and designed for use with Shimano HG+ and KMC 12-Speed chains. These chainrings are optimized for Gravel, Cyclocross and Road disciplines. Wolf Tooth's patented Drop-Stop ST wide/narrow technology provides maximum contact on the drive side of the wide teeth to spread the load and improves chainring life Narrow side allows clearance for mud and debris which reduces friction Alternating wide/narrow tooth pattern prevents chain derailment Compatible with Shimano HG+ and KMC 12-Speed chains only Requires 6mm chainring bolts (Sold Separately) Item Specifications Chainring BCD 110 Color Black Defined Color Black Drivetrain Speeds 12 Material Aluminum Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 52 Wolf Tooth 110 BCD 5-Bolt Gravel/CX/Road Chainring for 12-Speed Shimano HG+ Chain Chainring UPC: 810159400459

by Wolf Tooth

—$95.95

Wolf Tooth 110 BCD 5-Bolt Drop-Stop ST chainrings are manufactured using premium 7075-T6 aluminum and designed for use with Shimano HG+ and KMC 12-Speed chains. These chainrings are optimized for Gravel, Cyclocross and Road disciplines. Wolf Tooth's patented Drop-Stop ST wide/narrow technology provides maximum contact on the drive side of the wide teeth to spread the load and improves chainring life Narrow side allows clearance for mud and debris which reduces friction Alternating wide/narrow tooth pattern prevents chain derailment Compatible with Shimano HG+ and KMC 12-Speed chains only Requires 6mm chainring bolts (Sold Separately) Item Specifications Chainring BCD 110 Color Black Defined Color Black Drivetrain Speeds 12 Material Aluminum Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 50 Wolf Tooth 110 BCD 5-Bolt Gravel/CX/Road Chainring for 12-Speed Shimano HG+ Chain Chainring UPC: 810159400442

by Wolf Tooth

—$395.95

Resolve rev2 expands upon the original Resolve while adding 34.9 diameter, a 242mm travel option, and new internals for 25% lighter actuation and better self-bleeding. It's lightweight, keeps a low profile, and will perform as expected every time it is needed. It also has a low lifetime cost of ownership because it is covered by Wolf Tooth Right to Repair and is serviceable at home. The Resolve Dropper Post uses a unique, proprietary design with the patented Resolve self-bleeding cartridge at its core. Any air that gets into the fluid chamber is automatically purged with every up/down motion, which means it never sags so there is no need for manual reset or purchase of new cartridges. It has the shortest stack height of any dropper post at 32mm and is one of the lightest dropper posts on the market when looking at grams per millimeter of travel. Designed, developed, and assembled at Wolf Tooth in Minnesota, USA with CNC machined parts 100% user-serviceable by any experienced home bike mechanic 7075 and 7050 aluminum for the structural parts Self-bleeding cartridge that removes air from the fluid chamber with every actuation, while rev2 features even faster self-bleeding when compared to rev1 Short insertion length is vital for smaller bikes, frames with curved seat tubes, and frames with seat tubes that have bottle bosses Cable actuated with infinite height adjustment, lever sold separately Spacers for travel adjustment available individually or as kits Item Specifications Actuation Cable Remote Adjustment Infinite Cable Routing Internal Clamp Style Standard Rails Color Black Defined Color Black Diameter 34.9 Length 587 Material Aluminum Max Height 405 Min Height 274 Offset (mm) 0 Remote Position Left Remote Position Right Travel (mm) 242 Weight 711 Wolf Tooth Wolf Tooth Resolve Dropper Seatpost Rev 2 Dropper Seatpost UPC: 810159400411

by Wolf Tooth

—$350

Resolve rev2 expands upon the original Resolve while adding 34.9 diameter, a 242mm travel option, and new internals for 25% lighter actuation and better self-bleeding. It's lightweight, keeps a low profile, and will perform as expected every time it is needed. It also has a low lifetime cost of ownership because it is covered by Wolf Tooth Right to Repair and is serviceable at home. The Resolve Dropper Post uses a unique, proprietary design with the patented Resolve self-bleeding cartridge at its core. Any air that gets into the fluid chamber is automatically purged with every up/down motion, which means it never sags so there is no need for manual reset or purchase of new cartridges. It has the shortest stack height of any dropper post at 32mm and is one of the lightest dropper posts on the market when looking at grams per millimeter of travel. Designed, developed, and assembled at Wolf Tooth in Minnesota, USA with CNC machined parts 100% user-serviceable by any experienced home bike mechanic 7075 and 7050 aluminum for the structural parts Self-bleeding cartridge that removes air from the fluid chamber with every actuation, while rev2 features even faster self-bleeding when compared to rev1 Short insertion length is vital for smaller bikes, frames with curved seat tubes, and frames with seat tubes that have bottle bosses Cable actuated with infinite height adjustment, lever sold separately Spacers for travel adjustment available individually or as kits Item Specifications Actuation Cable Remote Adjustment Infinite Cable Routing Internal Clamp Style Standard Rails Color Black Defined Color Black Diameter 31.6 Length 353 Material Aluminum Max Height 263 Min Height 157 Offset (mm) 0 Remote Position Left Remote Position Right Travel (mm) 125 Weight 457 Wolf Tooth Wolf Tooth Resolve Dropper Seatpost Rev 2 Dropper Seatpost UPC: 810159400350

by Wolf Tooth

—$380

Resolve rev2 expands upon the original Resolve while adding 34.9 diameter, a 242mm travel option, and new internals for 25% lighter actuation and better self-bleeding. It's lightweight, keeps a low profile, and will perform as expected every time it is needed. It also has a low lifetime cost of ownership because it is covered by Wolf Tooth Right to Repair and is serviceable at home. The Resolve Dropper Post uses a unique, proprietary design with the patented Resolve self-bleeding cartridge at its core. Any air that gets into the fluid chamber is automatically purged with every up/down motion, which means it never sags so there is no need for manual reset or purchase of new cartridges. It has the shortest stack height of any dropper post at 32mm and is one of the lightest dropper posts on the market when looking at grams per millimeter of travel. Designed, developed, and assembled at Wolf Tooth in Minnesota, USA with CNC machined parts 100% user-serviceable by any experienced home bike mechanic 7075 and 7050 aluminum for the structural parts Self-bleeding cartridge that removes air from the fluid chamber with every actuation, while rev2 features even faster self-bleeding when compared to rev1 Short insertion length is vital for smaller bikes, frames with curved seat tubes, and frames with seat tubes that have bottle bosses Cable actuated with infinite height adjustment, lever sold separately Spacers for travel adjustment available individually or as kits Item Specifications Actuation Cable Remote Adjustment Infinite Cable Routing Internal Clamp Style Standard Rails Color Black Defined Color Black Diameter 30.9 Length 503 Material Aluminum Max Height 363 Min Height 232 Offset (mm) 0 Remote Position Left Remote Position Right Travel (mm) 200 Weight 545 Wolf Tooth Wolf Tooth Resolve Dropper Seatpost Rev 2 Dropper Seatpost UPC: 810159400336

by Wolf Tooth

—$395.95

Resolve rev2 expands upon the original Resolve while adding 34.9 diameter, a 242mm travel option, and new internals for 25% lighter actuation and better self-bleeding. It's lightweight, keeps a low profile, and will perform as expected every time it is needed. It also has a low lifetime cost of ownership because it is covered by Wolf Tooth Right to Repair and is serviceable at home. The Resolve Dropper Post uses a unique, proprietary design with the patented Resolve self-bleeding cartridge at its core. Any air that gets into the fluid chamber is automatically purged with every up/down motion, which means it never sags so there is no need for manual reset or purchase of new cartridges. It has the shortest stack height of any dropper post at 32mm and is one of the lightest dropper posts on the market when looking at grams per millimeter of travel. Designed, developed, and assembled at Wolf Tooth in Minnesota, USA with CNC machined parts 100% user-serviceable by any experienced home bike mechanic 7075 and 7050 aluminum for the structural parts Self-bleeding cartridge that removes air from the fluid chamber with every actuation, while rev2 features even faster self-bleeding when compared to rev1 Short insertion length is vital for smaller bikes, frames with curved seat tubes, and frames with seat tubes that have bottle bosses Cable actuated with infinite height adjustment, lever sold separately Spacers for travel adjustment available individually or as kits Item Specifications Actuation Cable Remote Adjustment Infinite Cable Routing Internal Clamp Style Standard Rails Color Black Defined Color Black Diameter 30.9 Length 587 Material Aluminum Max Height 405 Min Height 274 Offset (mm) 0 Remote Position Left Remote Position Right Travel (mm) 242 Weight 601 Wolf Tooth Wolf Tooth Resolve Dropper Seatpost Rev 2 Dropper Seatpost UPC: 810159400343

by Wolf Tooth

—$89.95

Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 3mm offset is designed for Boost 52mm chainline Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 3 Round or Oval Oval Tooth Count 36 Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 810006808094

by Wolf Tooth

—$199.95

Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris. 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer 118mm long x 102mm wide, creating a large platform size that provides strong foot support Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal Shorter 3mm pins are available separately as replacement parts to customize the convexity of the pedal Item Specifications Color Orange Defined Color Orange Pedal Body Material Aluminum Pedal Spindle 9/16" Pedal Type Platform Spindle Material 17-4 PH Stainless Steel Wolf Tooth Ripsaw Aluminum Pedals Pedals UPC: 810159400688

by Wolf Tooth

—$11.65

Add color to your chainguide with Gnarwolf Chainguide replacement heads. These heads are compatible with all rev1 and rev2 Gnarwolf Chainguides. Compatible with Wolf Tooth GnarWolf Rev 1 and Rev 2 chainguides Glass-filled nylons heads are incredible durable and light weight Item Specifications Color Purple Defined Color Purple Wolf Tooth Gnarwolf Replacement Chainguide Head Chain Retention System Part UPC: 812719029346

by Wolf Tooth

—$11.65

Add color to your chainguide with Gnarwolf Chainguide replacement heads. These heads are compatible with all rev1 and rev2 Gnarwolf Chainguides. Compatible with Wolf Tooth GnarWolf Rev 1 and Rev 2 chainguides Glass-filled nylons heads are incredible durable and light weight Item Specifications Color Orange Defined Color Orange Wolf Tooth Gnarwolf Replacement Chainguide Head Chain Retention System Part UPC: 812719029339

by Wolf Tooth

—$11.55

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. Designed and manufactured in Minneapolis, MN USA Fits 1-1/8"" steerers only Made from 6061-T6 Aluminum Item Specifications Color Raw Silver Defined Color Silver S.H.I.S. Stem Clamp Diameter 28.6 Thickness 3 Wolf Tooth Precision Spacer 5 Pack Headset Stack Spacer UPC: 810006809565

by Wolf Tooth

—$11.55

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. Designed and manufactured in Minneapolis, MN USA Fits 1-1/8"" steerers only Made from 6061-T6 Aluminum Item Specifications Color Raw Silver Defined Color Silver S.H.I.S. Stem Clamp Diameter 28.6 Thickness 5 Wolf Tooth Precision Spacer 5 Pack Headset Stack Spacer UPC: 810006809572

by Wolf Tooth

—$11.65

Add color to your chainguide with Gnarwolf Chainguide replacement heads. These heads are compatible with all rev1 and rev2 Gnarwolf Chainguides. Compatible with Wolf Tooth GnarWolf Rev 1 and Rev 2 chainguides Glass-filled nylons heads are incredible durable and light weight Item Specifications Color Black Defined Color Black Wolf Tooth Gnarwolf Replacement Chainguide Head Chain Retention System Part UPC: 812719029292

by Wolf Tooth

—$84.95

Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 3mm offset is designed for Boost 52mm chainline Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 3 Round or Oval Oval Tooth Count 34 Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 810006808087

by Wolf Tooth

—$54.95

These Wolf Tooth aluminum single speed cogs feature extra tall teeth for reliable chain retention when using chain tensioners. Item weight: 28g Crafted with strong and lightweight premium 7075-T6 aluminum Optimized for use with 9,10,11 speed chains, but suitable for use with some 12-speed chains Reversible and 4.5mm wide at the base to help prevent cog from damaging your freehub body Fits Shimano Hyperglide style freehub splines Not compatible with Shimano Microspline or SRAM XD freehubs Not compatible with Campagnolo 13-speed chains Item Specifications Cassette Body Type Shimano HG Defined Color Gold Drivetrain Speeds Single Speed 3/32" Material Aluminum Tooth Count 22 Wolf Tooth Aluminum Single Speed Cog Driver and Single Cog UPC: 812719026499

by Wolf Tooth

—$54.95

These Wolf Tooth aluminum single speed cogs feature extra tall teeth for reliable chain retention when using chain tensioners. Item weight: 19g Crafted with strong and lightweight premium 7075-T6 aluminum Optimized for use with 9,10,11 speed chains, but suitable for use with some 12-speed chains Reversible and 4.5mm wide at the base to help prevent cog from damaging your freehub body Fits Shimano Hyperglide style freehub splines Not compatible with Shimano Microspline or SRAM XD freehubs Not compatible with Campagnolo 13-speed chains Item Specifications Cassette Body Type Shimano HG Defined Color Orange Drivetrain Speeds Single Speed 3/32" Material Aluminum Tooth Count 18 Wolf Tooth Aluminum Single Speed Cog Driver and Single Cog UPC: 812719025065

by Wolf Tooth

—$129.95

Designed for racing, and for those looking to optimize each detail in pursuit of speed, Wolf Tooth Aero Chainrings are strong, lightweight, and profiled to mate perfectly with your crankset for a clean, integrated look. Taking advantage of 1x drivetrain systems and wider-range rear cassettes, Aero Chainrings provide similar overall range to standard 2x drivetrain configurations. They feature Wolf Tooth's patented Drop-Stop design for the best wear life, chain retention, and mud clearance. Drop-Stop ST is specifically for the Shimano 12-speed Hyperglide+ chain, which is used by GRX 800 12-speed. Compatible with Shimano GRX 800 series cranksets Drop-Stop ST is designed for Shimano Hyperglide+ and KMC 12-speed chains only Wolf Tooth s patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud-shedding ability Intended for 50mm chainlines (Same as Shimano GRX 800 series chainrings) CNC machined with premium 7075-T6 aluminum for exceptional strength and weight savings Manufactured in Minnesota USA Item Specifications Chainring BCD 110 Shimano Asymmetric Color Black Defined Color Black Drivetrain Speeds 12 Material Aluminum Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 48 Wolf Tooth 110 Asymmetrical BCD Aero Chainrings for 12-Speed Shimano GRX 800 Series Chainring UPC: 810006809169

by Wolf Tooth

—$134.95

Designed for racing, and for those looking to optimize each detail in pursuit of speed, Wolf Tooth Aero Chainrings are strong, lightweight, and profiled to mate perfectly with your crankset for a clean, integrated look. Taking advantage of 1x drivetrain systems and wider-range rear cassettes, Aero Chainrings provide similar overall range to standard 2x drivetrain configurations. They feature Wolf Tooth's patented Drop-Stop design for the best wear life, chain retention, and mud clearance. Drop-Stop ST is specifically for the Shimano 12-speed Hyperglide+ chain, which is used by GRX 800 12-speed. Compatible with Shimano GRX 800 series cranksets Drop-Stop ST is designed for Shimano Hyperglide+ and KMC 12-speed chains only Wolf Tooth s patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud-shedding ability Intended for 50mm chainlines (Same as Shimano GRX 800 series chainrings) CNC machined with premium 7075-T6 aluminum for exceptional strength and weight savings Manufactured in Minnesota USA Item Specifications Chainring BCD 110 Shimano Asymmetric Color Black Defined Color Black Drivetrain Speeds 12 Material Aluminum Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 50 Wolf Tooth 110 Asymmetrical BCD Aero Chainrings for 12-Speed Shimano GRX 800 Series Chainring UPC: 810006809176

by Wolf Tooth

—$350

The Resolve Dropper Post uses a unique, proprietary design with the patented Resolve self-bleeding cartridge at its core. Any air that gets into the fluid chamber is automatically purged with every up/down motion, which means it never sags so there is no need for manual reset or purchase of new cartridges. It has the shortest stack height of any dropper post at 32mm and is one of the lightest dropper posts on the market when looking at grams per millimeter of travel. Designed, developed, and assembled at Wolf Tooth in Minnesota, USA with CNC machined parts 100% user-serviceable by any experienced home bike mechanic 7075 and 7050 aluminum for the structural parts Self-bleeding cartridge that removes air from the fluid chamber with every actuation Short insertion length is vital for smaller bikes, frames with curved seat tubes, and frames with seat tubes that have bottle bosses Cable actuated with infinite height adjustment, lever sold separately Spacers for travel adjustment available individually or as kits Item Specifications Actuation Cable Remote Adjustment Infinite Cable Routing Internal Clamp Style Standard Rails Color Black Defined Color Black Diameter 31.6 Length 353 Material Aluminum Max Height 263 Min Height 157 Offset (mm) 0 Remote Position Left Remote Position Right Travel (mm) 125 Weight 456 Wolf Tooth Wolf Tooth Resolve Dropper Seatpost Rev 1 Dropper Seatpost UPC: 810006806274

by Wolf Tooth

—$11.65

Replacement parts and extra supplies for the EnCase System. Bacon Strip plugs store inside handle of the EnCase System Chain + Tire Plug Multi-Tool. The Presta Valve Core and Presta to Schraeder adapter and Master Links store in EnCase System Storage Sleeves bonus area. Wolf Tooth EnCase Replacement Parts Bike Multi-Tool UPC: 810006802511

by Wolf Tooth

—$10.85

Replacement parts and extra supplies for the EnCase System. Bacon Strip plugs store inside handle of the EnCase System Chain + Tire Plug Multi-Tool. The Presta Valve Core and Presta to Schraeder adapter and Master Links store in EnCase System Storage Sleeves bonus area. Wolf Tooth EnCase Replacement Parts Bike Multi-Tool UPC: 810006802498

by Wolf Tooth

—$11.65

Replacement parts and extra supplies for the EnCase System. Bacon Strip plugs store inside handle of the EnCase System Chain + Tire Plug Multi-Tool. The Presta Valve Core and Presta to Schraeder adapter and Master Links store in EnCase System Storage Sleeves bonus area. Wolf Tooth EnCase Replacement Parts Bike Multi-Tool UPC: 810006802481

by Wolf Tooth

—$10.85

Replacement parts and extra supplies for the EnCase System. Bacon Strip plugs store inside handle of the EnCase System Chain + Tire Plug Multi-Tool. The Presta Valve Core and Presta to Schraeder adapter and Master Links store in EnCase System Storage Sleeves bonus area. Wolf Tooth EnCase Replacement Parts Bike Multi-Tool UPC: 810006802504

by Wolf Tooth

—$54.95

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. Stainless Steel Bearings provide unparalleled corrosion resistance Highly recommended if your headset will be exposed to wet conditions or sweat Custom molded dual-lip seal on the crown race to protect lower bearing in the toughest conditions Lifetime warranty Item Specifications Bearing Type Cartridge Bearing Type Stainless Steel Color Gold Crown Race 40 S.H.I.S Lower EC49 Wolf Tooth Premium EC Lower Headset Headset Lower UPC: 812719027571

by Wolf Tooth