Tools / Lube / Solvents

—$32.95

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, Presta valve core remover, valve stem lock nut wrench and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self closes the tool. Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman) Master links are not included Tire lever not recommended for use on carbon rims Weight: 38.5g Material: 7075-T6 aluminum Made in the USA Wolf Tooth Masterlink Combo Pack Pliers Chain Tool UPC: 812719027076

by Wolf Tooth

—$71.95

The QTH-1 is an ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners and fittings found on bicycles. The magnetic "quick-change" handle allows for one-handed operation and makes changing bits quick and easy. The bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box, or can be permanently mounted to any wall or tool board. The QTH-1 is a professional-grade tool built to withstand the rigors of daily shop use, and is fully rebuildable. Includes the following magnetic 1/4" bits: 2mm, 2.5mm, 3mm, 4mm, 5mm & 6mm hex T25 Torx-compatible #2 Philips cross tip Bit holder includes empty spaces for 2 extra bits Park Tool Quick Change Bit Driver Set Ratchets & Bits UPC: 763477006967

by Park Tool

—$275

The Feedback Sports Ultralight Bike Repair Stand comes in at 10.3lb (4.8kg) while still matching the same durability and stability of our other stands. Featuring a 360 rotating Slide-Lock clamp, a 54" (137cm) wide base with rubber-coated end caps, confidence in the security of your bike is never in question. When the service day is done, it folds in to a space-saving unit for storage or travel. Rubber-coated clamp secures and protects expensive components and beautifully painted frames Clamp opening up to 1.9 (4.8cm) accommodates large diameter frame tubes Anodized 6061 T6 aluminum construction is lightweight, corrosion resistant and incredibly durable Stiff tripod base and rubber-coated end caps create ultimate stability even on uneven surfaces Item Specifications Bike Weight Limit (per bike) 75 Clamp Style Seatpost Stand Style Folding Weight (lb) 10.6 Feedback Sports Ultralight Bike Repair Stand Repair Stands UPC: 817966010055

by Feedback Sports

—$338.95

Designed to be easily mounted to any post or wall stud, the PRS-4 is a shop quality stand. Features the 100-3C adjustable linkage clamp fits bike frame tubes from 1" to 1 5/8" Clamp has reliefs on both jaws to allow for cable routing and durable replaceable clamp covers Places the clamp approximately 14.5" from the wall Features powder coat finish and solid cast aluminum construction Mounting bolts not included Mounting plate is 6 x 2.5" (15 x 6cm) with holes approximately 1/2" in diameter on 4" centers Item Specifications Ship Weight 10lbs Stand Style Wall-mount Park Tool PRS-4 Wall Mounted Repair Stand Repair Stands UPC: 763477005823

by Park Tool

—$99.99

The Muc-Off Bio Drivetrain Cleaner is a complete drivetrain cleaning solution that can either be poured into a chain cleaning device or sprayed directly to your chain rings, rear cassettes and derailleurs to clean your entire drivetrain within seconds. It's also fully biodegradable and safe for metal, plastic, rubber and seals. Item Specifications Application Type Bulk Case Pack No Petroleum Based No Muc-Off Drivetrain Cleaner Degreaser / Cleaner EAN: 5037835807004

by Muc-Off

—$13.95

Individual metric combination wrench for daily shop use or advanced mechanics. 15mm combination wrench Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip Item Specifications Tip Size 15mm Park Tool Metric Wrench Combination Wrench UPC: 763477024909

by Park Tool

—$10.95

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006363

by Park Tool

—$45

Bearing-size specific cartridge bearing removal tool. Individual extractor for removing 6805 sealed bearing Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing Tap the extractor out with a punch Wheels Manufacturing Bearing Extractor Bearing Tool UPC: 836572005088

by Wheels Manufacturing

—$12.95

Park Tool saw guides ensure a straight, clean cut every time.Insert for the SG-7.2 Saw Guide to cut either alloy or carbon handlebars for the WTB PadLoc grips Item Specifications keyword search padloc Park Tool Saw Guides Head & Steerer Tube Cutting Tool UPC: 763477006554

by Park Tool

—$29.95

High quality, long service life, cast CrMo steel construction chain tool for single and multi-speed chains up to 13 speed, including Campangnolo hollow pin chains. Built-in clip holds tool pieces together. Contains 4 and 5mm Allen wrenches and chain hook. CrMo steel chain tool, 4 / 5 mm Allen wrenches, steel wire chain hook Chain hook holder, chain pin holder, and chain pin breaker Topeak Super Chain Tool II Chain Tool UPC: 883466036277

by Topeak

—$139.95

The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. Wolf Tooth 8-Bit System Bike Multi-Tool UPC: 810006805321

by Wolf Tooth

—$54.99

When a puncture strikes and it's just too big and gnarly to seal, the Muc-Off Stealth Tubeless Puncture Plug is the ultimate backup tool, which is cleverly stored inside your bar ends. The expanding silica plugs (which are included) cover most MTB, road and gravel handlebar sizes and the premium CNC Machined Aluminum bar ends are available in many anodized colors to match your ride. Each lightweight and durable set contains everything you need to get back riding when you're stuck battling a hole that's just not sealing. Designed to plug and repair multiple holes that won t seal with just sealant, compatible with all tubeless MTB, Gravel and Road tires CNC Machined from 6061 Aluminum, anodized for style Expanding plug insert fits most MTB, Gravel & Road Handlebars, adjustable with included 17mm, 19mm and 21mm silica plugs to fit different diameters Easy installation into bars using a 4mm Allen key, compatible with all open-end grips and drop bars Kit includes: (1) Stainless steel 2-in-1puncture plug/reamer tool, (1) knife trimming tool, (5ea) thin, medium, and thick tire plug worms Muc-Off Stealth Tubeless Puncture Plugs Tire Repair Kit Tubeless Patch Kit EAN: 5037835207927

by Muc-Off

—$20.95

Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. Carefully selected combination of Chrome Vanadium and S-2 tool steels Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless Sliding T-handle creates increased leverage and multiple access positions Park Tool THT Sliding T-Handle Torx Compatible Wrench Torx Wrench UPC: 763477009548

by Park Tool

—$10.35

Latex-free and coated in polyurethane that seals out grease, oil and grime. The textured surface on the palm-side of the glove provides enhancing grip, making it easier handling small parts. Reusable and long lasting. Breathable upper fabric keeps hands cool and dry Designed to last for many weeks of heavy use Item Specifications keyword search Gloves, Mechanic Gloves Finish Line Mechanic's Grip Gloves Miscellaneous Shop Supply UPC: 036121710528

by Finish Line

—$39.95

Professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined, perfectly balanced 6061 aluminum handle hard anodized to take the rigors of everyday use.Ergonomic, CNC machined, perfectly balanced 6061 aluminum handle hard anodized Park Tool Precision Hex Driver Hex Wrench UPC: 763477002693

by Park Tool

—$10.49

Truing Stand parts and Accessories designed to maintain or improve your Park Tool truing stand. Park Tool Truing Stand Parts and Accessories Truing Stand Part UPC: 763477501189

by Park Tool

—$44.95

Hexus X Multi-Tool Chain tool is compatible with single and multi-speed chains up to 12 speed Not compatible with Campagnolo 11 speed hollow pin chains Chrome vanadium steel Includes Secondary chain link fence, air release button, self-tightening tool and chain pin breaker Allen wrenches - 2 / 2.5 / 3 / 4 (2 pcs) / 5 / 6 mm tool bit - 8 mm hex, Torx bits - T15 / T25, Torx wrench - T30, #2 Phillips screw driver, 14G / 15G spoke wrenches, steel wire chain hook, 2 engineering grade plastic tire levers, Presta Core Tool and chromoly steel chain tool Topeak Hexus X Bike Multi-Tool UPC: 883466016200

by Topeak

—$76.30

High quality hub tools designed to work with DT Swiss components.Includes axle disassembly tool and short disassembly cylinder for 2010+ 240S front hubs DT Swiss Hub Tools Other Hub Tool EAN: 7613052127378

by DT Swiss

—$14.80

Quickly cleans without damage to plastic, rubber or carbon components. Strong enough for the grimiest metal parts and safe for parts with rubber O-rings and seals, urethane elastomers, and painted surfaces. Strong and Safe biodegradable formula that is safe for use with all plastic, rubber and carbon fiber parts Non-toxic, made using a soy-based extract Can be diluted with water for less difficult cleaning jobs Item Specifications Application Type Aerosol Case Pack No Petroleum Based Yes Finish Line EcoTech Degreaser Degreaser / Cleaner UPC: 036121710368

by Finish Line

—$631.95

Park Tool offers quality tapping and facing tools for use on bottom brackets. Cuts and cleans threads and faces of BB shell for proper BB installation Includes handle set, Right and Left hand English taps, and facing cutter Compatible with Park handle sets only Park Tool Tapping/Facing Tools Bottom Bracket Tapping & Facing Tool UPC: 763477000903

by Park Tool

—$28.99

OneUp Components EDC Top Cap, Purple The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes.  Check fork compatibility.   KIT INCLUDES EDC TOP CAP EDC steerer plug 2x 1mm, 3mm, & 5mm Headset Spacers    INSTALL THE EDC TOP CAP You need a minimum of 5mm of headset spacer above the stem and your steerer tube should be 1-2mm below the top of this spacer. Apply a small amount of grease to your newly cut thread and screw in your new EDC top cap. The Top Cap interface uses a standard cassette lockring tool. You do not need to apply much torque as you are only preloading the bearings. (Your stem pinch bolts are what holds your fork in place). The EDC multitool contains a top cap tightening tool. So even when riding you always have the ability to tighten your headset if need be.  Align your stem and tighten your stem bolts to the manufacturers recommended torque.  The final step is to insert the plastic bung/plug into the bottom of your fork. Turn your 8mm hex sideways and use it to push the plug into the fork by pulling the 8mm towards your chest. This piece holds the bottom of the EDC Tool and stops it from rattling. It also keeps dirt out of your fork and has a small drain hole. Note* The EDC Tap kit includes a star nut puller and self aligning tap Patents Pending All compatibility and fit determinations have been made solely by OneUp. Use of this or any other aftermarket product may void any warranty you have with the original part manufacturer. OneUp EDC Top Cap Headset Tool

by OneUp

—$16.95

The Dummy Pedal allows for easy adjustments. Quickly installs to take the place of a pedal when making adjustments during bike assembly Use of the DP-3 is much quicker than threading a pedal into the crank and then unthreading it after the bike is assembled Park Tool Dummy Pedal Pedal Tool UPC: 763477002815

by Park Tool

—$525

The Feedback Sports Pro Mechanic HD Bike Repair Stand is made to accommodate heavier Ebikes, cargo bikes, and more. With oversized, anodized aluminum tubes, a wide and stable base, stronger jaws, and faster closure, the Pro Mechanic HD matches the expanded capability of today's bicycles. It can support bikes up to 100lbs, while still lightweight, and portable at 18lbs. Oversized, anodized 6061-T6 aluminum construction is lightweight, corrosion-resistant, and durable Ideally suited for heavier bicycles: 145% stiffer than Pro Elite New, ratcheting and rotating crank for jaw closure is faster and one-hand operable: closes 60% faster than Pro Elite New, replaceable rubber pads on forged clamp and micro-adjustment secures and protects expensive components and painted frames SAG Sustainability Action Group approved 100% recyclable packaging, no plastic, lifetime right to repair Item Specifications Bike Weight Limit (per bike) 100 Clamp Style Seatpost Stand Style Folding Weight (lb) 18 Feedback Sports Pro Mechanic HD Bike Repair Stand Repair Stands UPC: 817966011250

by Feedback Sports

—$39.99

If you own an E-Bike, then you'll know that cleaning and lubing your chain is a tricky business, as the crank doesn't spin backwards like a regular bike unless it's flipped upside down - which can scratch components. Our new E-Bike precision-machined Crank Tool contains three different sized tool bits which snap into place with a magnetized connection, all wrapped up in a durable CNC machined 6061 aluminium body. It fits straight onto a chain ring, so the crank can be spun backwards, and the protective silicone sleeve prevents any crank damage. Comes supplied with a handy lanyard and carabiner clip Precision Machined, 6061 aluminum body with a screw cap Inner polypropylene tool bit holder contains: 5mm, 6mm hex and T30 Torx bits Rubber O-ring reduces water ingress into tool bits Silicone sleeve protects bicycle crank when backpedaling Corrosion-resistant neodymium magnet snaps tool bits into place Anodized finish in Muc-Off pink Muc-Off E-Bike Drivetrain Tool Cleaning Tool EAN: 5037835213058

by Muc-Off

—$28.99

Formulated specifically for bicycle brake systems. Compatible with all mineral oil brake systems including Shimano and Magura. Provides maximum fluid life and braking performance, even at low temperatures. Super low viscosity yields superior lever response, pad retraction, and consistent performance through a full range of operating temperatures Prevents foaming and overheating Finish Line Mineral Oil Brake Fluid Disc Brake Fluid UPC: 036121960022

by Finish Line

—$149.95

Torq Stick Torque Wrech Pull & rotate to select your target torque value Audible signal: Torque wrench clicks when preset torque is reached Storage pen integrated with tool holder snaps to hold the Ratchet Stick together for riding or storage Turn the ratchet wheel to tighten or loosen mounting bolt 3, 4, 5 Allen bits, T20, T25 Torx bits included Material: aluminum and engineering grade polymer body, hardened steel ratchet, S2 hardened steel bits 15 x 2.5 x 2.15 cm / 5.8 x 1 x 0.85 Item Specifications Bit Size 3mm Hex,4mm Hex,5mm Hex,T20,T25 Bits Included Yes Topeak Torq Stick Torque Wrench UPC: 883466019331

by Topeak

—$24.99

Finish Line Shock Oil Suspension Fluid is Premium suspension fluid formulated specifically for all oil damped bicycle forks. 100% compatible with all suspension designs and seals. A semi-synthetic oil formulation that has become the top choice of professionals worldwide. Will not thicken or thin due to changes in temperature. Low foam technology delivers consistent and predictable damping in all riding conditions. Race proven to deliver superior performance in all suspension systems. A super high viscosity index of over 235 provides consistent damping through the longest and most extreme of riding conditions. Labels wrinkled due to other product leakage Premium suspension fluid formulated specifically for all oil damped bicycle forks 100% compatible with all suspension designs and seals Will not thicken or thin due to changes in temperature Low foam technology delivers consistent and predictable damping in all riding conditions Race proven to deliver superior performance in all suspension systems Combines reliability of mineral oils with durability of synthetic oils Prevents stiction and viscosity breakdown Won't foam - provides consistent and predictable damping Item Specifications Ounces 16fl oz Fork Oil Weight 15 Finish Line Shock Oil Suspension Oil and Lube UPC: 036121700147

by Finish Line

—$28.95

Professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit. 8mm Sliding T-Handle Hex Wrench Carefully selected combination of Chrome Vanadium and S-2 tool steels Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless Machined, chamfered tips allow easier insertion into hex fittings Integrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy Sliding T-handle creates increased leverage and multiple access positions Item Specifications Ball End No Set or Individual Individual Style T-Handle Tip Size 8mm Hex Park Tool THH Sliding Hex Wrench Hex Wrench UPC: 763477009463

by Park Tool

—$435.95

Professional quality bench mount stand that rotates 360 degrees with 3 different height adjustments. Clamping height can be raised up to 16.25 (41CM) above the bench surface Includes 100-3D Micro Adjust Clamp (clamps tubes up to 3 , fully adjustable clamping pressure, narrow 2.7 clamping jaws) Clamp rotates 360 degrees Chrome plated Item Specifications Clamp Style Seatpost Stand Style Bench-mount Weight (lb) 14 Park Tool PRS-4 Bench Mounted Repair Stand Repair Stands UPC: 763477006172

by Park Tool

—$16.46

Park Spoke Wrenches are precisely sized for the spoke nipple and made from durable materials that provide years of dependable use. Ideal for wheel truing when there s limited access to spoke nipples such as small, high spoke count wheels or while using an anti-rotation spoke holder SW-9 combines two common spoke nipple sizes, .127 /3.23mm (Park Tool Black SW-0) and .136 /3.45mm (Park Tool Red SW-2) Forged, machined, heat treated, plated and vinyl dipped for years of dependable use Park Tool Spoke Wrenches Spoke Wrench UPC: 763477007353

by Park Tool

—$39

Shimano tools for installation and removal of lockring for cassette, and disc rotors.Fits cassette and rotor lockrings Shimano Cassette Lockring Tools Freewheel Tool UPC: 689228890701

by Shimano

—$34.95

Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a presta-to-schrader adapter and valve core or a master link for support on the trail. Bonus storage space fits a presta-to-schrader adapter and valve core or a master link (both sold separately) Vibration-damping material and snug fit prevents rattling Durable precision-machined aluminum end caps Custom fit rubber flap can be trimmed to fit in smaller diameter bars Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) Wolf Tooth EnCase System Storage Sleeves Bike Multi-Tool UPC: 810006801804

by Wolf Tooth

—$59.95

Nano Torqbox X Torque Wrench Set is a compact adjustable torque socket. Works with a 5mm Allen wrench or any mini-tool with a 5mm Allen key to provide correct tightening of frame and component bolts to recommended torque values for safety and performance. Torque range: 2-6 Nm. Constructed from hardened steel Includes: 3, 4, 5mm, Allen bits, T20, T25 Torx bits, and carry case Item Specifications Bit Size 3mm Hex,4mm Hex,5mm Hex,T20,T25 Bits Included Yes Topeak Nano Torqbox X Torque Wrench UPC: 883466017412

by Topeak

—$44.95

This ultralight hex and bottom bracket wrench has a 1-inch hex at one end and an external BB cup spline at the other end. The 1-inch hex end features magnets that quickly couple with Wolf Tooth's steel hex insert tools. 1-inch hex drive at one end and 16-notch 44mm bottom bracket tool (or centerlock rotor tool) at the other end Includes the wrench only. Steel inserts are not included but can be purchased separately 1-inch hex drive interface compatible. Magnets inset allow quick coupling and decoupling of steel inserts Wolf Tooth Pack Wrench Other Tool UPC: 812719028523

by Wolf Tooth

—$15.95

MWR Metric Ratchet Wrenches offer world famous Park Tool quality. Strong, comfortable, and beautiful! Wrenches feature open ends and 12-point box ends with 72 tooth, two-way ratcheting mechanisms Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip Item Specifications Tip Size 10mm Park Tool MWR Metric Ratchet Wrench Combination Wrench UPC: 763477024657

by Park Tool

—$25

Prestacycle TorqKey T-Handle Torque-Limiting Bits Tool. Torque value accurate to + / - 8% Torque accuracy lifecycle exceeds 5000 cycles Provides 20 degree overrun when maximum torque is reached Overrun provides user with unmistakable feedback when torque value is reached Polymer T-Handle ergonomically designed for comfortable four-finger and palm grip Color-coded tension markings on both sides 12mm wide Zinc shaft has 50% thicker walls; stronger than other Torque tools Magnetic 1/4" hex bit retention makes bit changes easy Item Specifications Bits Included No Prestacycle TorqKey Torque Tool Torque Wrench UPC: 689466771053

by Prestacycle

—$115

RockShox Dynamic Seal GreaseRecommended for rear shock service RockShox Dynamic Seal Grease Grease UPC: 710845796241

by RockShox

—$15.95

Park Tool Taps cut easily and fit conventional tap handles. TAP-10 is a 10 x 1mm thread For rear derailleur hangers All taps are made of high carbon steel and are precision ground and hardened to stay sharp Park Tool Thread Taps Taps UPC: 763477007650

by Park Tool

—$39.99

Finish Line's Ceramic Grease is formulated with sub-micron ceramic particles, Teflon fluoropolymer and premium non-toxic synthetic oils. Guaranteed to optimize the performance and efficiency of bottom brackets, hubs and headset bearings. As bearings become coated with the Teflon and ceramic particles, friction and heat is dissipated. Bearings last longer and run quieter and smoother. Features the latest ceramic technology Coats and smooth frictional surfaces with ceramic particles and Teflon fluoropolymers Clear and non-staining Item Specifications Ounces 16fl oz Finish Line Ceramic Grease Grease UPC: 036121610095

by Finish Line

—$13.09

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006240

by Park Tool

—$27.95

Made for the rigors of everyday shop use, this adjustable tap handle fits many common bicycle taps. Fits most metric taps from M4-M12 Fits most standard taps from #8-9/16" Park Tool Tap Handle Taps UPC: 763477007766

by Park Tool

—$15.95

Park Repair Stand AccessoriesThe 1707.2 Collar is designed to allow Pre-2012 PRS-20 and PRS-21 Team Race Stands to accept installation of the #106 Work Tray Park Tool Stand Accessories Repair Stand Accessory UPC: 763477014702

by Park Tool

—$15

SRAM Hydraulic Disc Brake grease is specially formulated to lubricate all moving part inside the lever and caliper assemblies. This grease keeps brakes performing at their best and can be used with both DOT and Mineral Oil brake systems. Designed to keep DOT and Mineral Oil brake systems performing at their best Hydraulic Brake assembly grease should be used to lubricate all moving parts inside the lever and caliper assembly Recommended for Lever Pistons, Hose Compression Nuts, Threaded Barbs, and Olives Item Specifications Case Pack No Petroleum Based No Unit of Sale Retail-Single SRAM Hydraulic Disc Brake Grease Grease UPC: 710845918964

by SRAM

—$206

The Headset Press Pro Install Kit is a robust, and easy to use tool. The kit includes a machined aluminum handle, 1/2" threaded rod, two machined aluminum drifts and the Adjustable Press Stop allowing for easy drift placement. One drift is machined with multiple steps to fit common head tube inner diameters listed in the Compatibility tab below. The other drift has two sizes to press in cups with either 1-1/8" or 1-1/2" bearings. Originally Press-8 Machined aluminum handle and drifts Red anodized drifts and handles Zinc-plated 1/2" diameter threaded rod Long threaded rod works with long head tubes up to 250mm Wheels Manufacturing Headset Press Pro Install Kit Headset Tool UPC: 811079027108

by Wheels Manufacturing

—$164

Magura T-Handle Torque Control Tool with slotted 8mm bit. Torque limiting cam-over clutch prevents over tightening of critical fasteners to protect carbon fiber and other parts at critical junctions (bar/stem; stem/steerer tube; frame/seatpost) 1/4" hex magnetic bit shank with T25 (1", and 4" lengths), M4 (1", and 4" lengths), M5, and M6 bits Adjustable from 2Nm to 8Nm indexing at every 0.1 (tenth) of a Newton Meter 8mm slotted sleeve nut bit for tightening your brake hose sleeve nut to accurately compress hose fittings Ergonomic grip Manufactured by Snap On Industrial to the highest standards and accuracy Item Specifications Bit Size 4mm Hex,5mm Hex,6mm Hex,T25 Bits Included Yes Magura Torque Control Tool Torque Wrench EAN: 4055184030035

by Magura

—$13.29

Super slick and made with a three-part propriety package of ingredients known as Trilinium. Finish Line's 100% synthetic oil grease coats ball bearings and races, preventing wear and distortion in headsets and bottom brackets. Advanced corrosion inhibitors and extreme pressure additives withstand extreme conditions. Polymers prevents washout and water emulsification Prevents rust and corrosion even in saltwater Item Specifications Application Type Tube Case Pack No Petroleum Based Yes Finish Line Premium Grease with Trilinium Technology Grease UPC: 036121960787

by Finish Line

—$268.10

High quality hub tools designed to work with DT Swiss components. DT Swiss Hub Tools Other Hub Tool EAN: 7613052306544

by DT Swiss

—$39.99

Suspension oil for servicing Manitou forks.5wt, 1 liter Manitou Manitou Suspension Fork Oil Suspension Oil and Lube UPC: 844171014837

by Manitou

—$9.75

High quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. "Take it easy" Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Hexagonal screwdriver hex-plus Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: color coding according to profile and size Hex-plus allows socket head screws to live longer Hexagonal anti-roll feature against rolling away Wera 354 Hex Driver Hex Wrench EAN: 4013288003966

by Wera

—$7.29

Park Tool socket bit sets are precision-engineered tools designed specifically for bicycle maintenance and repair. Known for their durability and professional-grade quality, these sets are widely used by home mechanics, bike shops, and cycling enthusiasts who need reliable, repeatable performance when working on modern bicycles.All Sockets and Bits are 3/8" drive Park Tool SBS Socket and Bit Sets Ratchets & Bits UPC: 763477017208

by Park Tool