Tools / Lube / Solvents

—$13.09

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006264 MPN: SCW-23

by Park Tool

—$25.95

Bicycle disc brake rotors can become warped from extensive use, excessive heat, or impact. Even new disc rotors may not always be perfectly straight, causing annoying pad rub and affecting performance. The Park Tool DT-2.2 is specially designed and precisely manufactured to gently adjust bent bicycle disc brake rotors. The DT-2.2 features one long slot and two short slots for maximum compatibility with any rotor design or thickness up to 2.5 mm. Constructed from high quality steel with a vinyl dipped handle for comfort.Compatible with rotors up to 2.5mm thick Park Tool DT-2.2 Rotor Truing Fork Brake Tool UPC: 763477003065 MPN: DT-2.2

by Park Tool

—$30

Rear shock tools for repair and maintenance of Rockshox rear shocks. RockShox Rear Shock Tools Suspension Tool UPC: 710845880964 MPN: 00.4318.041.002

by RockShox

—$45

Tools for maintaining RockShox suspension forks. RockShox Suspension Fork Tools Suspension Tool UPC: 710845848261 MPN: 00.4318.044.000

by RockShox

—$39.95

The TCS Rocket Tire Plug Kit features reusable "Rocket" anchors that can be preloaded with tire plugs to ensure they're ready for immediate use upon detecting a puncture with your tubeless set-up. With two sizes of Rocket anchors available, riders can use 1-4 plugs per repair, accommodating various puncture sizes. Unlike traditional tire plugs that may rip out under high pressure or during aggressive cornering, the reusable Rocket anchors securely hold the plug in place. This dependable solution keeps the puncture sealed until the tire is replaced, at which point the Rocket anchor can be removed and reused with fresh tire plugs. Additionally, the "extra-hand" feature built into the storage cap is there to keep the air in the tire while you prepare your anchor and plug repair. Reusable Rocket anchors rotate once pushed into the tire and physically prevent the plug from pulling back through the tire as a traditional plug would, due to high pressures or heavy cornering. There are four anchors included in each kit; two small and two large Rocket Launcher tool facilitates easy insertion of plug-loaded anchors into the tire, its length is adjustable for various needs and tread depths. depths. The right number of plugs can be chosen based on local conditions. Once a puncture occurs, the rider quickly uses the tool to insert the selected number of plugs, achieving an instant, air-tight seal The Extra Hand feature seals punctures temporarily, allowing riders to assess and address the damage without rush. It also serves as a reamer and aids in removing sticky anchors from the storage tubes, ensuring a smooth repair process The Rocket Launcher tool is covered by slip-fit cap to provide quick and easy access during the fleeting seconds after a puncture occurs. This also fits on the backend of WTB TCS Rocket Tire Plug Kit Tubeless Patch Kit UPC: 714401951136 MPN: W095-0113

by WTB

—$42

Our Travel Bag collection is an awesome travel and protective companion for ensuring your stand looks new for years to come. Be the most popular rider at the trailhead with a Feedback Sports repair stand. Be the most popular mechanic at home with a brilliant storage bag. Maximize the portability of your Feedback Sports repair stand Protect your stand s aluminum finish and your other equipment when traveling Travel bag is water-resistant, durable and padded Enough space for a repair stand, Flop Stop, and Pro Truing Stand External window for business cards / ID card Padded Velcro strap for comfortable carrying and transport Full length, dual-zipper design 1-Year Warranty Feedback Sports Repair Stand Travel Bag Repair Stand Accessory UPC: 817966010079 MPN: 16505

by Feedback Sports

—$18.95

Disc brake rotors should be regularly checked for wear to ensure safety and performance. The DCA-1 installs onto most digital, dial, or vernier calipers (including the Park Tool DC-1) and features protruding contact points that allow measurement of the center of the braking surface, bypassing the unworn edge to ensure an accurate measurement. The conical end points of the DCA-1 can be used to measure center-to-center distances of bolt holes for calculating bolt circle diameter (BCD) of chainrings and cranks.Compatible with most standard vernier, dial, and digital caliper designs Park Tool DCA-1 Digital Caliper Accessory Measuring Tool UPC: 763477002389 MPN: DCA-1

by Park Tool

—$39.99

When OneUp came out with the EDC tool it changed the game for tool storage on your bike. Now, with the threadless carrier, you can switch over from the original threaded steerer option, or get that EDC hidden if you've got it externally mounted. If you don't have an EDC tool, don't worry, we sell those here too! The EDC Threadless carrier is the stealthiest way to have a full size OneUp EDC tool sitting nicely inside your steerer tube. If you thought the EDC Lite wasn't quite enough, this is the setup for you that fits all the essential tools inside your steerer tube! All you need to do is remove your star nut by knocking it all the way down the steerer, drop in and thread from the bottom. Just make sure to tension your headset properly! Features Compatible with the EDC V2 Tool *not included If you don't have an EDC tool, Click Here to complete your ultimate EDC kit! The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool) Easy to install in less than 5 mins. Color matched in anodize to OneUp Composite Pedals, Grips and Handlebar Decals! Keeps mud and debris out of the bottom of your steerer. **Needed Steerer tube length Ensure your fork is compatible - Very Important Incompatible forks: Fox 38 with oval steerer (Use a EDC Threaded install), Giant Overdrive 2 Forks. Cannondale Lefty Forks. Carbon Steerers **Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement. Fox (NO Fox 38) = 190mm min RockShox Forks = 220-265mm OneUp EDC Threadless Carrier Bike Multi-Tool EAN: 0050062821945 MPN: 1C0677ORA

by OneUp

—$39.99

When OneUp came out with the EDC tool it changed the game for tool storage on your bike. Now, with the threadless carrier, you can switch over from the original threaded steerer option, or get that EDC hidden if you've got it externally mounted. If you don't have an EDC tool, don't worry, we sell those here too! The EDC Threadless carrier is the stealthiest way to have a full size OneUp EDC tool sitting nicely inside your steerer tube. If you thought the EDC Lite wasn't quite enough, this is the setup for you that fits all the essential tools inside your steerer tube! All you need to do is remove your star nut by knocking it all the way down the steerer, drop in and thread from the bottom. Just make sure to tension your headset properly! Features Compatible with the EDC V2 Tool *not included If you don't have an EDC tool, Click Here to complete your ultimate EDC kit! The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool) Easy to install in less than 5 mins. Color matched in anodize to OneUp Composite Pedals, Grips and Handlebar Decals! Keeps mud and debris out of the bottom of your steerer. **Needed Steerer tube length Ensure your fork is compatible - Very Important Incompatible forks: Fox 38 with oval steerer (Use a EDC Threaded install), Giant Overdrive 2 Forks. Cannondale Lefty Forks. Carbon Steerers **Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement. Fox (NO Fox 38) = 190mm min RockShox Forks = 220-265mm OneUp EDC Threadless Carrier Bike Multi-Tool EAN: 0049962821940 MPN: 1C0677GRN

by OneUp

—$24.99

Finish Line Shock Oil Suspension Fluid is Premium suspension fluid formulated specifically for all oil damped bicycle forks. 100% compatible with all suspension designs and seals. A semi-synthetic oil formulation that has become the top choice of professionals worldwide. Will not thicken or thin due to changes in temperature. Low foam technology delivers consistent and predictable damping in all riding conditions. Race proven to deliver superior performance in all suspension systems. A super high viscosity index of over 235 provides consistent damping through the longest and most extreme of riding conditions. Premium suspension fluid formulated specifically for all oil damped bicycle forks 100% compatible with all suspension designs and seals Will not thicken or thin due to changes in temperature Low foam technology delivers consistent and predictable damping in all riding conditions Race proven to deliver superior performance in all suspension systems Combines reliability of mineral oils with durability of synthetic oils Prevents stiction and viscosity breakdown Won't foam - provides consistent and predictable damping Item Specifications Ounces 16fl oz Fork Oil Weight 2.5 Finish Line Shock Oil Suspension Oil and Lube UPC: 036121700109 MPN: S00162501

by Finish Line

—$17.95

Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. Carefully selected combination of Chrome Vanadium and S-2 tool steels Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless Sliding T-handle creates increased leverage and multiple access positions Park Tool THT Sliding T-Handle Torx Compatible Wrench Torx Wrench UPC: 763477009500 MPN: THT-10

by Park Tool

—$461.95

PRS-22 Repair Stand Constucted from 6063 T6 Lightweight alumium & composites, weighs 12.5lbs Adjustable BB height adjustment from 30"-45" 360 Degree rotation for easy access to all sides of the bike Bottom bracket supports a wide variety of different BB shells Non-Frame clamping, holds securely by bottom bracket and front fork Solid and stable folding tripod design. Works with all axle systems Park Tool PRS-22 Repair Stands UPC: 763477005250 MPN: PRS-22.2

by Park Tool

—$26.99

Wunder Shine Bike Polish Removes imperfections and fills minor scratches Flouro Polymer technology creates a microscopic layer of protection Repels water and atmospheric pollutants Reduces washing and maintenance time Silicon oils allow easy application and incredible depth of shine Will not leave a powdery white residue Safe on paintwork, clear coat, carbon fibre, chrome, metal & plastics Item Specifications keyword search Accessories Tools Discounts Muc-Off Wunder Shine Polish EAN: 5037835113105 MPN: 1131US

by Muc-Off

—$74.95

Nano Torqbar X Torque Wrench is a compact, easy to use and read torque wrench provides correct tightening of bolts on frame and component bolts to recommended torque values for safety and performance. Two of your favorite bits can be carried in the handle of the Nano TorqBar X for immediate use and even greater portability during rides. Torque range: 2-6 Nm. Aluminum / Engineering grade polymer Integrated compartment for two bits, Carry case Includes: 3, 4, 5mm hex bits, T20, and T25 Torx bits, and carry case Item Specifications Bit Size 3mm Hex,4mm Hex,5mm Hex,T20,T26 Bits Included Yes Topeak Nano Torqbar X Torque Wrench UPC: 883466017405 MPN: TT2576

by Topeak

—$17.95

MTC Multi-Function Tool 2.5, 3, 4, 5, 6 and 8mm hex wrenches T25 & T30 Torx compatible drivers Combo cross/straight tip screwdriver 8 & 15mm box wrenches Key ring holder Park Tool MTC Bike Multi-Tool UPC: 763477003867 MPN: MTC-30

by Park Tool

—$13.95

Designed to fit internal spoke nipples found on many deep section aero rims. Fits internal nipples on many deep section aero rims Extra long (3.25"/ 8.5cm) spoke wrench socket Ergonomically-designed screwdriver handle Item Specifications Tip Size 5.5mm Park Tool Nipple Drivers Spoke Wrench UPC: 763477007322 MPN: SW-18

by Park Tool

—$75

RockShox Bleed Kits for servicing various RockShox suspension components. RockShox Bleed Kit Suspension Tool UPC: 710845909016 MPN: 00.4318.098.000

by RockShox

—$29.95

Park Tool bottom bracket tools for installation and removal of 16 notch bottom brackets. Fits 16-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 39-40 mm and a minor diameter (inside of notches) of 37.6 mm Fits Shimano XTR BB93, Dura-Ace BB9000, and Token Also fits Shimano STEPS square spindle e-bike systems including: E6000, E6002, E6050 Replacement for Shimano TL-FC38 tool Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477001610 MPN: BBT-49.3

by Park Tool

—$8.62

High quality Wera L-keys with colour coded, convenient plastic sleeve. This means that the tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Color coded, easy-to-grip plastic sleeve, even at low temperatures Hexagonal ballpoint on the long arm Wear-resistant size marking Wera 950 SPKL L-Key Hex Wrench Hex Wrench EAN: 4013288167897 MPN: 05022612001

by Wera

—$39.99

The ultimate trailside companion - these high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold. Includes: Chain tool: 8/9/10 speed compatible Hex wrenches: 2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #1, phillips #2, flat #2 Spoke wrench: 0, 1, 2, 3 Torx: T-10, T-25 Lifetime Warranty Item Specifications Chain Tool Yes Number of Tools 19 Style Folding Crank Brothers Multi-Tools Bike Multi-Tool UPC: 641300161925 MPN: 16192

by Crank Brothers

—$12.49

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006325 MPN: SCW-14

by Park Tool

—$15.76

Press adaptors for sealed bearing installation press. Compatible with PRESS-1 or PRESS-4 handles Sold individually Inner hole sized to fit 3/8" ACME threaded rod Sold individually (2 drifts required for some installations) Wheels Manufacturing Press Adaptors Bearing Tool UPC: 836572009499 MPN: 6903OA-7

by Wheels Manufacturing

—$10.95

Regular lubrication of bicycle chains addresses annoying squeaks and noises, and extends the life of the chain and drivetrain components. Formulated using a proprietary blend of oils, Park Tool CL-1.2 Chain Lube works great in wet or dry conditions. It penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion. Compatible with all bicycle chains. Also works great as general-purpose light lubricant for use on bicycle brake and derailleur cables and housing, spoke nipples, and derailleur and brake pivots.Some painted surfaces can be sensitive to oil and grease. Clean off any excess oil or grease immediately. Test first on an inconspicuous area to see if it causes a stain or discoloration Park Tool CL-1.2 Chain Lube Lubricant UPC: 763477001825 MPN: CL-1.2

by Park Tool

—$21.95

Disposable gloves keep hands free of grime and protected from potentially harmful chemicals and solvents. Made from a thick, heavy-duty nitrile material, our gloves provide superior fit and are tough enough to withstand a day's work. An essential companion for brake bleeding, drivetrain cleaning, and other messy procedures. Powder-free and latex-free Ambidextrous Box of 100 gloves Available in sizes S, M, L, and XL Park Tool MG-3 Nitrile Mechanics Gloves Miscellaneous Shop Supply UPC: 763477009739 MPN: MG-3X

by Park Tool

—$45.99

High quality set of L-keys for hexagonal socket screws in a practical clip made of wear-free material for lasting secure retention of the L-keys, with easy removal when required. Hex-Plus L-keys provide larger contact surfaces on the screw head. The notching effect is thereby reduced to a minimum; the destruction of the screw head is almost eliminated. The ball on the long arm allows safe working even in difficult mounting positions.The BlackLaser surface treatment provides excellent surface protection, corrosion resistance and long life. Laser coated abrasion-resistant size markings on the L-keys for quick access. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer L-keys are quickly to hand thanks to their size markings Wear-resistant size marking Wear-resistant clip material for enhanced durability Wera 950/9 Hex-Plus SPKS L-Key Hex Wrench Set Hex Wrench EAN: 4013288207517 MPN: 05133164001

by Wera

—$7.25

Built for everyday bike shop use, the Shop Inflator utilizes a true dual Presta and Schrader head that rotates, making valve access quick and easy.Includes 3 different size O-Rings Park Tool Shop Inflator Shop Air Compressor Head UPC: 763477015389 MPN: 1595K

by Park Tool

—$145

This tool set is designed to fully service DT Swiss hubs and other hub manufacturers that utilize DT Swiss hub internals. The set includes all the bearing guide sizes for front and rear hubs, two low-drag silicone freehub seals and a high-quality, ratchet removal tool. Enduro DT Hub Tool Kit Other Hub Tool UPC: 811780024656 MPN: BRT-013

by Enduro

—$32

Enduro calls it a TorqTite wrench but it actually does a lot more than that. This Tool allows you to tighten and loosen TorqTite bottom bracket cups for BB86/92, BB386 and PF30 BB shells, as well as, outboard BSA/ITA cups for 24mm spindles and all T47 cups. The BB86/92 side also works for centerlock disc brake lock-rings. Allows you to tighten and loosen TorqTite bottom bracket cups for BB86/92, BB386 and PF30 BB shells, as well as, outboard BSA/ITA cups for 24mm spindles and all T47 cups BB86/92 side also works for centerlock disc brake lock-rings This item is a single wrench, though Enduro recommends two for proper TorqTite BB installation, or a single wrench can be used in conjunction with BBT-001, BBT-015, BBT-029 or BBT-025 on the opposite side Constructed from rugged steel featuring a corrosion-resistant black finish that is designed to provide high strength for precise torque application, preventing slippage during the installation and removal of TorqTite bottom bracket cups Item Specifications keyword search spanner Enduro Torqtite Flat Wrench Bottom Bracket Tool Bottom Bracket Tool UPC: 811780020757 MPN: BBT-010

by Enduro

—$28.99

Replacement Parts for Park Tool Clamps. Fits the older clamps with plastic-dipped jaws No cable groove Plastic cover should be removed before installing new covers Parts not listed below can be drop shipped from Park, please call QBP and ask for extension 1205 for more information Park Tool Clamp Parts Repair Stand Replacement Part UPC: 763477012906 MPN: 466

by Park Tool

—$274.95

The portable work bench features a large work surface with specially sized slots, holes, and ports for holding tools and accessories. Heavy duty steel legs provide a rock solid base for heavy tools and supplies Folds down for compact storage Work Surface: 36 x 23" Folded Dimensions: 42.5 x 23 x 7" Set Up Dimensions: 36 x 23 x 32.5" Park Tool PB-1 Portable Work Bench Work Bench UPC: 763477005717 MPN: PB-1

by Park Tool

—$47.95

Mini folding, multi-tools keep bolts tight while still being small enough to fit into a jersey pocket. Includes neoprene carrying pouch with belt loop Dimensions: 3.2 x 1.7 x 0.8" Weight: 185g Chain tool is compatible with single- and multi-speed chains, including 10-speed hollow pin (Not 11-speed compatible) Material Construction: Extruded Aluminum frame with hardened steel tools Smooth tool edges won't snag jersey pockets Item Specifications Includes - 2, 2.5, 3, 4, 5, 6, 8, and 10mm Allen Wrenches - T25 Torx - Phillips and Flat-head Screwdrivers - 14g and 15g Spoke Wrenches - Chain Tool - Chain Pin Breaker - Tire Lever - Bottle Opener Topeak Mini 18 Multitool Bike Multi-Tool UPC: 768661117610 MPN: TT2518

by Topeak

—$33

hlins fork lube is a high-performance suspension fluid engineered for use in motorcycle and mountain bike forks, cartridge kits, and damper systems. It is fully synthetic and designed to reduce internal friction, resist foaming, and maintain stable viscosity across a wide temperature range. Available in multiple viscosities, it enhances responsiveness, durability, and overall ride quality under demanding conditions. Provides excellent lubrication for reduced friction and smoother fork operation Offers ultra-low foaming and stable viscosity even under extreme temperatures Enhances suspension performance and longevity with multiple viscosity options Ohlins Fork Lube Suspension Tool UPC: 840153638770 MPN: 01336-01

by Ohlins

—$17.91

A proprietary ceramic formulation containing integral Boron Nitride compounds for low friction in dry and dusty conditions. Formulated with our unique eBike specific lubricity pack to handle the higher torque loads of an eBike drivetrain. Ideal for chains, cables, shifters, derailleurs & pedals. Creates a dry ceramic coating for increased durability and dry condition performance Contains Boron Nitride compounds Ceramic compounds provide ultra-low friction for unparalleled lubrication Non-dust attracting - excels in dry and dusty conditions Utilizes biodegradable organic compounds Ideal for road and off-road ntegral UV tracer dye - aids accurate application to ensure total protection Item Specifications Application Type Drip Case Pack No Designed for ebike Yes Petroleum Based No Muc-Off eBike Dry Lube Lubricant EAN: 5037835217032 MPN: 20956

by Muc-Off

—$64.99

The Piston Spreader simultaneously pushes the pistons back into the caliper with parallel spreading plates in preparation for brake pad replacements. Tektro Piston Spreader Brake Tool EAN: 4717592035964 MPN: ABOT001000

by Tektro

—$24.99

Finish Line Shock Oil Suspension Fluid is Premium suspension fluid formulated specifically for all oil damped bicycle forks. 100% compatible with all suspension designs and seals. A semi-synthetic oil formulation that has become the top choice of professionals worldwide. Will not thicken or thin due to changes in temperature. Low foam technology delivers consistent and predictable damping in all riding conditions. Race proven to deliver superior performance in all suspension systems. A super high viscosity index of over 235 provides consistent damping through the longest and most extreme of riding conditions. Premium suspension fluid formulated specifically for all oil damped bicycle forks 100% compatible with all suspension designs and seals Will not thicken or thin due to changes in temperature Low foam technology delivers consistent and predictable damping in all riding conditions Race proven to deliver superior performance in all suspension systems Combines reliability of mineral oils with durability of synthetic oils Prevents stiction and viscosity breakdown Won't foam - provides consistent and predictable damping Item Specifications Ounces 16fl oz Fork Oil Weight 10 Finish Line Shock Oil Suspension Oil and Lube UPC: 036121700130 MPN: S00161001

by Finish Line

—$29.99

Rockshox Suspension Oil. Item Specifications Ounces 34fl oz Fork Oil Weight 2.5 RockShox Suspension Oil Suspension Oil and Lube UPC: 710845616761 MPN: 11.4015.354.000

by RockShox

—$9.99

High quality Wera L-keys with colour coded, convenient plastic sleeve. This means that the tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Color coded, easy-to-grip plastic sleeve, even at low temperatures Hexagonal ballpoint on the long arm Wear-resistant size marking Wera 950 SPKL L-Key Hex Wrench Hex Wrench EAN: 4013288167880 MPN: 05022610001

by Wera

—$29.95

Simple and precise cleat fitting tool provides critical alignment for cleats giving riders maximum pedal efficiency.For installing Crank Brothers Style cleats on shoes Ergon TP1 Cleat Fitting Tool Measurement Tool EAN: 4260012356694 MPN: 48000010

by Ergon

—$44.95

This lightweight chainwhip is strong enough to be your go to chainwhip, but light enough that you won't need to leave it at home when on the move. Compatible with any cassette up to and including 12 speed cassettes Design and manufactured in Minneapolis, MN USA 7075-T6 Aluminum Wolf Tooth Chain Whip Chain Whip & Cog Holder UPC: 812719026789 MPN: CWP

by Wolf Tooth

—$19

Ergonomic handle fits your palm with a four-finger grip to make wrenching easier. Tool provides an unmistakable 20 degree overrun when the torque limit is reached. Users can be confident knowing they have the correct tension. Low profile allows the tool to fit into more places for use, overall 60% lower height than tools costing twice as much. Won t break or lose accuracy from drops or unscrewing Low profile ergonomic grip for ease of use Item Specifications Bit Size 4mm Hex,5mm Hex,6mm Hex,T20,T25 Prestacycle TorqKey Mini & Bit Set Torque Wrench UPC: 689466771152 MPN: 77115

by Prestacycle

—$49

Three-way pocket Ratchet with Extension and T-Handle function, all in a compact, lightweight design to carry on your bike. The Patented reversible thumb-wheel ratchet head is rated to up-to 60Nm of total force, so this tool can even be used to install and remove pedals. Prestacycle T-Handle Rachet Deluxe Bike Multi-Tool UPC: 689466771299 MPN: 77129

by Prestacycle

—$99.99

The Muc-Off Bio Drivetrain Cleaner is a complete drivetrain cleaning solution that can either be poured into a chain cleaning device or sprayed directly to your chain rings, rear cassettes and derailleurs to clean your entire drivetrain within seconds. It's also fully biodegradable and safe for metal, plastic, rubber and seals. Item Specifications Application Type Bulk Case Pack No Petroleum Based No Muc-Off Drivetrain Cleaner Degreaser / Cleaner EAN: 5037835807004 MPN: 807US

by Muc-Off

—$21.95

Environmentally friendly, soy-based cutting fluid that makes any frame cutting tool work better and last longer. Effective on all metals A quality cutting fluid should be used when performing any cutting, tapping, facing, threading, or reaming procedure Item Specifications Ounces 8fl oz Park Tool CF-2 Cutting Fluid Cutting Oil UPC: 763477001078 MPN: CF-2

by Park Tool

—$16.95

Park Tool hex tools are made from high torque industrial steel and through hardened for long life. Item Specifications Type L Wrench,Ball End Tip Size 10.0mm Park Tool Hex Wrenches Hex Wrench UPC: 763477004284 MPN: HT-10

by Park Tool

—$24.95

Park Snap Ring Pliers Park Tool Snap Ring Pliers Snap Ring Plier UPC: 763477006042 MPN: RP-3

by Park Tool

—$40

The SRAM chain wear indicator tool is compatible will all the existing SRAM chain models and this includes HARD CHROME and non-HARD CHROME chain technology with a 0.8% wear critical specification. SRAM Chain Wear Tool Chain Tool UPC: 710845871009 MPN: 00.2518.058.000

by SRAM

—$79.99

Pro Bleed Kits include state-of-the-art fittings, syringes, and fluid for an effective, repeatable bleed. Includes syringes and universal adapters with squeeze valves Compatible with most mineral oil hydraulic disc brakes from Shimano, Magura, Tektro, TRP, and Hayes Red seals provide easy identification for use with mineral oil systems only Jagwire Pro Bleed Kit Brake Tool EAN: 4715910042922 MPN: WST076

by Jagwire

—$30.95

Park Tool BBT Series Bottom Bracket Tools. Fits 16-notch bottom bracket tool fittings with a major diameter of 48 50 mm and a minor diameter of 46.4 mm, including:FSA MegaEvo, and Wheels Mfg Thread Together Does not fit Hope BSA30 Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive Item Specifications keyword search FSA MegaEvo keyword search Wheels Mfg Thread Together Park Tool BBT Series Bottom Bracket Tool UPC: 763477001368 MPN: BBT-27.3

by Park Tool

—$32.95

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, Presta valve core remover, valve stem lock nut wrench and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self closes the tool. Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman) Master links are not included Tire lever not recommended for use on carbon rims Weight: 38.5g Material: 7075-T6 aluminum Made in the USA Wolf Tooth Masterlink Combo Pack Pliers Chain Tool UPC: 812719027076 MPN: MLCP-BLK-GRY

by Wolf Tooth

—$71.95

The QTH-1 is an ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners and fittings found on bicycles. The magnetic "quick-change" handle allows for one-handed operation and makes changing bits quick and easy. The bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box, or can be permanently mounted to any wall or tool board. The QTH-1 is a professional-grade tool built to withstand the rigors of daily shop use, and is fully rebuildable. Includes the following magnetic 1/4" bits: 2mm, 2.5mm, 3mm, 4mm, 5mm & 6mm hex T25 Torx-compatible #2 Philips cross tip Bit holder includes empty spaces for 2 extra bits Park Tool Quick Change Bit Driver Set Ratchets & Bits UPC: 763477006967 MPN: QTH-1

by Park Tool