All.

—$131.87

Shimano Dura-Ace SL-BSR1 Shifters The right-side/rear shifter is 11-Speed, index-only, left-side/front is 2-Speed. All bar-end road shifters produced after Nov 2008 have an I.D. spec fit range of 19-22mm Item Specifications Double or Triple Double Drivetrain Speeds 11 End Type Shimano/SRAM Front Der/Shifter Compatibility Shimano Road Mount Type Bar End Mount Type Downtube Rear Der/Shifter Compatibility Shimano Road Shimano Dura-Ace SL-BSR1 Bar End Shifters Shifter, Road UPC: 689228317734

by Shimano

—$120

KMC DLC 11 chains features an extra-hard surface (diamond-like coating) that reduces abrasive wear and provides optimal stability. Hollow inner and outer plates and pins to reduce weight and help shed mud Features inner and outer plate chamfering to aid in smooth shifting Triple X-durability KMC chains are put through a heat treatment process three times to maximize strength so the chain last longer and goes farther High rigidity provides precise shifting and extra durability Compatible with BOX, Campagnolo, Shimano, and SRAM 11-speed drivetrains Designed for a variety of riding styles Item Specifications Chain Connection Type Single Use Master Link Color Black/Pink Defined Color Pink Drivetrain Speeds 11 Half Link Chain No Links 118 Weight 243 KMC DLC 11 Chain Chains UPC: 766759711009

by KMC

—$105

The Minion DHX was born specifically from the demands of Maxxis' top athletes to provide more support, more control, and more confidence on next-level modern DH race tracks. Featuring an improved dual-ply casing structure, compound compositions and tread layout, the next generation Minion DHX provides an unparalleled combination of grip and support in fast and / or high load conditions. 3C MaxxGrip compound uses the stickiest, slowest rebounding rubber offered by Maxxis to provide lots of traction on the trail New DH Casing provides more puncture protection and durability, while achieving improved compliance over chattery rocks and roots for better support under high cornering loads and impacts This improved progressive casing stiffness favors performance over sidewall stability or rim strike prevention, allowing for lower pressures (2 3 psi less than previous gen DH casing), resulting in slower tire rebound and more planted, damped feel More side knob support to keep knobs from folding at the base, with low depth sipes to allow for surface conformation Intuitive handling characteristics with smooth transition from center to side knobs Comparable rolling speed and braking power as DHR II but with increased stability and a smoother transition to cornering knobs Front and rear versatility Item Specifications Color Black Defined Color Black Designed for ebike Yes Flat Protection Tread and Sidewall ISO Diameter 584 / 650b / 27.5" ISO Width (mm) 63 Labeled Size 27.5 x 2.50 Tire Bead Folding Tire Type Tubeless Ready Clincher TPI 120 Weight 1433 Maxxis Minion DHX Tire Tires EAN: 4717784046181

by Maxxis

—$105

The Minion DHX was born specifically from the demands of Maxxis' top athletes to provide more support, more control, and more confidence on next-level modern DH race tracks. Featuring an improved dual-ply casing structure, compound compositions and tread layout, the next generation Minion DHX provides an unparalleled combination of grip and support in fast and / or high load conditions. 3C MaxxGrip compound uses the stickiest, slowest rebounding rubber offered by Maxxis to provide lots of traction on the trail New DH Casing provides more puncture protection and durability, while achieving improved compliance over chattery rocks and roots for better support under high cornering loads and impacts This improved progressive casing stiffness favors performance over sidewall stability or rim strike prevention, allowing for lower pressures (2 3 psi less than previous gen DH casing), resulting in slower tire rebound and more planted, damped feel More side knob support to keep knobs from folding at the base, with low depth sipes to allow for surface conformation Intuitive handling characteristics with smooth transition from center to side knobs Comparable rolling speed and braking power as DHR II but with increased stability and a smoother transition to cornering knobs Front and rear versatility Item Specifications Color Black Defined Color Black Designed for ebike Yes Flat Protection Tread and Sidewall ISO Diameter 622 / Road / 29" ISO Width (mm) 63 Labeled Size 29 x 2.50 Tire Bead Folding Tire Type Tubeless Ready Clincher TPI 120 Weight 1527 Maxxis Minion DHX Tire Tires EAN: 4717784046174

by Maxxis

—$49.03

Every high-quality, Galfer-patented Wave MTB 6-bolt disc rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Wave design comes from the Galfer motorcycle division and has been used across many disciplines at the highest level. Wave design keeps brakes extremely cool in demanding conditions Made with a proprietary blend of 420 virgin stainless steel with high carbon content that provides better memory and friction Laser cut to reduce the stress of the steel during production Includes 6 mounting bolts Precision made at the Galfer factory in Barcelona, Spain Item Specifications Hub/Disc Compatibility 6-Bolt keyword search Galfer Rotor Pad Compatibility All Pad Compounds Rotor Size (mm) 160 Rotor Type One Piece Weight 99 Galfer MTB 6-Bolt Rotor Disc Rotor EAN: 8400170112572

by Galfer

—$50.78

Every high-quality, Galfer-patented Wave MTB 6-bolt disc rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Wave design comes from the Galfer motorcycle division and has been used across many disciplines at the highest level. Wave design keeps brakes extremely cool in demanding conditions Made with a proprietary blend of 420 virgin stainless steel with high carbon content that provides better memory and friction Laser cut to reduce the stress of the steel during production Includes 6 mounting bolts Precision made at the Galfer factory in Barcelona, Spain Item Specifications Hub/Disc Compatibility 6-Bolt keyword search Galfer Rotor Pad Compatibility All Pad Compounds Rotor Size (mm) 180 Rotor Type One Piece Weight 120 Galfer MTB 6-Bolt Rotor Disc Rotor EAN: 8400170112589

by Galfer

—$54.28

Every high-quality, Galfer-patented Wave MTB 6-bolt disc rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Wave design comes from the Galfer motorcycle division and has been used across many disciplines at the highest level. Wave design keeps brakes extremely cool in demanding conditions Made with a proprietary blend of 420 virgin stainless steel with high carbon content that provides better memory and friction Laser cut to reduce the stress of the steel during production Includes 6 mounting bolts Precision made at the Galfer factory in Barcelona, Spain Item Specifications Hub/Disc Compatibility 6-Bolt keyword search Galfer Rotor Pad Compatibility All Pad Compounds Rotor Size (mm) 203 Rotor Type One Piece Weight 140 Galfer MTB 6-Bolt Rotor Disc Rotor EAN: 8400170112596

by Galfer

—$18.94

Galfer USA brake pads for use with Shimano Alivio/Deore and TRP disc brake calipers. The Galfer USA Standard Compound is a moderate-use pad with a similar feel to an OEM brake pad Strong durability in most riding conditions Fits: Shimano Alivio BR-MT200, BR-M355, BR-M375, BR-M395, BR-M415, BR-M447, BR-M465, BR-M475, BR-M495, BR-M505, BR-MT400, BR-MT500, BR-C601, BR-M416, BR-M445, BR-M446, BR-M485, BR-M486, BR-M505, BR-M506, BR-M515, BR-M525, BR-M575, Deore BR-T615, LX BR-T675 Also fits: TRP Dash Sport, Hylex, Spyre; Tektro Auriga, Dorado, Draco, Gemini, HDC 300, Mota, Orion Item Specifications Backing Plate Material Steel Compound Semi-Metallic Heat Sink No keyword search Galfer Disc Brake Pad Pad Shape Number 22 Galfer Shimano Alivio/Deore and TRP Compatible Disc Brake Pads Disc Brake Pad EAN: 8400160086302

by Galfer

—$50

Maurten Gel Mix 480 is a powder-based hydrogel fuel built for long-distance and long-duration efforts. Mixed with 200 ml of water, it creates a flask-friendly consistency that is thicker than Drink Mix and looser than Gel, giving athletes an efficient way to carry 120 grams of carbohydrates in one soft flask. Gel Mix 480 uses Maurten Hydrogel Technology. Like Maurten Drink Mix, it is pH-sensitive and forms a hydrogel in the acidity of the stomach, helping encapsulate carbohydrates and transport them through the stomach to be absorbed and used as fuel. Designed to be prepared before use, Gel Mix 480 can be consumed across one long effort or split into two 60 gram carbohydrate servings. It is compatible with Maurten Additions in Cola, Orange, Apple, and Menthol for athletes looking to adjust taste during long training blocks, races, or big days on the bike. 120 grams of carbohydrates and 480 calories per sachet Mixes with 200 ml of water to create a loose gel consistency Designed for use with a soft flask Thicker than Drink Mix and looser than Maurten Gel Can be split into two 60 gram carbohydrate servings Compatible with Maurten Additions: Cola, Orange, Apple, and Menthol No added flavors, colors, or preservatives Informed Sport certified Item Specifications Calories 480 Total Carbohydrates 120g Serving Size 1 Sachet Serving Per Container 6 Water Needed 200 ml Net Weight 125g / 4.4 oz Texture Loose Gel Additions Compatible Yes Prepare Before Use Yes Type Gel Mix Maurten Gel Mix Gel UPC: 7350008412996

by Maurten

—$629

CeramicSpeed's OSPW RS for SRAM RED D1/E1 and Force D1 AXS rear derailleurs has been lifted with a distinctly modern and angular design. The updated design brings balance and refinement to the OSPW RS System allowing it to blend seamlessly into the contemporary design trends of bikes and groupsets - making up the whole of which the OSPW System is part. Innovative tech features of the OSPW RS meets consumer demands for a premium ride experience. The design for the OSPW RS isn't solely a visual update. The cage itself has been reinforced to offer new levels of strength and durability. The CeramicSpeed OSPW RS System continues the tradition of providing optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Injection Molded Carbon Fiber reinforced PA cage offers new levels of strength and durability Anodized aluminum 5-spoke 15-tooth upper and 19-tooth lower pulley wheels are light weight and durable This OSPW System has handbuilt CeramicSpeed bearings installed in each pulley and features Grade 3 Silicon Nitride ball bearings that are 400% smoother, 128% harder and 58% lighter than standard steel balls normally used in the bicycle industry 2 customizable spring tension settings for optimal setup Compatible with SRAM Red D1/E1 and SRAM Force D1 AXS rear derailleurs Note; this OSPW system is not compatible with the SRAM RED XPLR, Force XPLR, or Rival XPLR eTap AXS rear derailleurs This version 2 system is compatible with both SRAM RED D1/E1 and Force D1 AXS rear derailleurs with or without the newly added spring tension holes Item Specifications Defined Color Black Drivetrain Speeds 12 Fits Brand SRAM Fits Model Red D1/E1 and Force D1 Largest Cog 36 CeramicSpeed OSPW RS Pulley Wheel System for SRAM D1/E1 and Force D1 AXS - v2 Cage Assembly EAN: 5711050156375

by CeramicSpeed

—$699

CeramicSpeed's OSPW RS Alpha System for SRAM Force E1 and Rival E1 rear derailleurs has been lifted lifted into the future with a distinctly modern and angular design. The updated design brings balance and refinement to the OSPW System allowing it to blend seamlessly into the contemporary design trends of bikes and groupsets - making up the whole of which the OSPW System is part. Innovative tech features of the OSPW RS Alpha meets consumer demands for a premium ride experience. The design for the OSPW RS Alpha isn't solely a visual update. The cage itself has been reinforced to offer new levels of strength and durability. The CeramicSpeed OSPW RS Alpha System continues the tradition of providing optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Injection Molded Carbon Fiber reinforced PA cage offers new levels of strength and durability Alpha disc pulleys are paired with a composite, narrow-wide tooth profile to help prevent debris from external objects getting stuck between the spokes The 15-tooth upper and 19-tooth lower Alpha pulley wheels feature ADR (Active Debris Remover) bearing protection that completely encloses the bearings This OSPW System has handbuilt CeramicSpeed bearings installed in each pulley and feartures Grade 3 Silicon Nitride ball bearings that are 400% smoother, 128% harder and 58% lighter than standard steel balls normally used in the bicycle industry 2 customizable spring tension settings for optimal setup Item Specifications Defined Color Black Drivetrain Speeds 12 Fits Brand SRAM Fits Model Force E1 and Rival E1 Largest Cog 36 CeramicSpeed OSPW RS Alpha Pulley Wheel System for SRAM Force E1 and Rival E1 Cage Assembly EAN: 5711050150175

by CeramicSpeed

—$69.80

SRAM AXS batteries, chargers, and battery accessories for all SRAM, eTap, and RockShox AXS system components. Easy and fast charging for your SRAM batteries (battery and cord sold separately) Battery charging takes up to 60 minutes to complete Charges batteries used on SRAM eTap AXS derailleurs, Eagle AXS derailleurs, RockShox Reverb AXS seatposts, and Flight Attendant suspension SRAM AXS Battery and Charger Accessories Electronic Shifter Part, SRAM UPC: 710845928123

by SRAM

—$183.46

When you need reliably consistent braking action, excellent modulation with a streamlined, clean appearance without shelling out big cash, the Deore M6200 2-piston disc brake and lever delivers. The BR-M6200 2-piece, 2-piston caliper design prioritizes weight savings and modulation. The lever features SERVO WAVE technology for quick pad contact and an optimized power curve, and the new low-viscosity oil helps braking remain stable over a wide range of temperatures. It's also I-SPEC EV compatible for full on-bar system integration. Caliper features two-piece construction to provide a rigid, durable design 2-Piston design prioritizes weight savings and modulation New piston seal, heat resistant resin pistons, and Shimano's low-viscosity oil ensure that braking remains stable over a wide range of temperatures The lever's clean aesthetic is achieved by running the hose parallel the the bar, along with I-SPEC EV compatibility for added handlebar adjustability Tooled reach-adjustment for perfect hand fitment Includes G04S-MX metal pads Item Specifications Adjustable Reach Yes Brake Caliper Type Post Mount Brake Lever Actuation Hydraulic Brake Lever Use Right Color Gray/Black Hydraulic Fluid Type Mineral Oil Hydraulic Hose Length 1700 Pad Compound Metallic Rotor Included No Shimano Deore M6200 Disc Brake and Lever Disc Brake & Lever UPC: 192790000459

by Shimano

—$44.98

These bite-sized, soft chews from Honey Stinger feature added caffeine for quick, customizable, and sustained energy on-the-go. Caffeinated Chews are the balanced, great-tasting nutrition you need for increased endurance and better performance, ensuring you don't hit a wall when you're chasing your personal best. 100mg caffeine vs 50g in original flavors Bite-sized burst of flavor Easy to digest Delivers 50mg of caffeine from tea Portable and customizable energy Includes electrolytes to replenish reserves Item Specifications Added Sugars 14mg Calcium 0mg Calories 80 Cholesterol 0mg Dietary Fiber 0g Flavor Tropical Twist Iron 0mg Potassium 21mg Protein 0g Saturated Fat 0g Serving Per Container 12 Serving Size 5 Chews (25g) Sodium 65mg Sugars 14g Total Carbohydrates 20g Total Fat 0g Trans Fat 0g Use During Vitamin D 0mcg Honey Stinger Caffeinated Energy Chews Chew UPC: 810815029307

by Honey Stinger

—$108.58

The Shimano BR-MT620 hydraulic four-piston disc brake calipers bring consistent and full-power braking to the line. The calipers are built around a rigid two-piece design and offer better bike control through their new low-viscosity oil, new piston seal and new heat-resistant resin piston, allowing the braking system to stay stable over a wide range of temperatures. Two-piece construction provides a rigid, durable design Dual-diameter 4-piston design, offering high power and control New piston seal, heat resistant resin pistons, and Shimano's low-viscosity oil ensure that braking remains stable over a wide range of temperatures Includes D03S-MX resin pads Recommended for use Deore BL-M6200 brake levers (sold separately) Compatible with both standard and 2.2mm thick disc brake rotors Item Specifications Brake Caliper Type Post Mount Brake Position Front or Rear Color Black Defined Color Black Hydraulic Fluid Type Mineral Oil Pad Compound Resin Rotor Included No Shimano Deore BR-MT620 Disc Brake Caliper Disc Brake Calipers UPC: 192790999845

by Shimano

—$44.98

These bite-sized, soft chews from Honey Stinger feature added caffeine for quick, customizable, and sustained energy on-the-go. Caffeinated Chews are the balanced, great-tasting nutrition you need for increased endurance and better performance, ensuring you don't hit a wall when you're chasing your personal best. 100mg of caffeine vs 50mg in original flavors Bite-sized burst of flavor Easy to digest Delivers 50mg of caffeine from tea Portable and customizable energy Includes electrolytes to replenish reserves Item Specifications Added Sugars 14mg Calcium 0mg Calories From Fat 0 Calories 80 Cholesterol 0mg Flavor Berry Blast Iron 0mg Potassium 21mg Protein 0g Saturated Fat 0g Serving Per Container 12 Serving Size 5 Chews (25g) Sodium 65mg Sugars 14g Total Carbohydrates 20g Total Fat 0g Trans Fat 0g Use During Vitamin D 58mg Honey Stinger Caffeinated Energy Chews Chew UPC: 810815029338

by Honey Stinger

—$2,999

The pinnacle of cross-country cycling performance can be found in the SRAM XX SL T-Type Eagle AXS Transmission Power Meter Groupset. Built to serve the most demanding rider's needs in the lightest weight configuration, XX SL Transmission is the evolution of SRAM's World Champion, World Cup winning XX Eagle AXS . AXS Pod ULT features a click and fire two-button design that transforms the crucial act of rider inputs into a vastly more personal experience for all your AXS controls Engineered as integrated, interdependent transmission components, the XX SL Eagle T-Type rear derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface XX SL T-Type derailleur offers the same intuitive pairing and set-up procedure as SRAM's Eagle AXS derailleur To further its performance, the lower pulley called, "Magic Wheel", keeps spinning if an object becomes lodged Derailleur features an overload clutch that accommodates common maintenance Ultra-lightweight XX SL T-Type 10-52t cassette offers game-changing inboard and outboard shifting performance under load XX SL Eagle AXS T-Type Power Meter crankset boasts SRAMs XX SL carbon crankarm with an integrated power meter to record and deliver live, accurate power readings to your head unit Power Meter spider Item Specifications Cogs 10-12-14-16-18-21-24-28-32-38-44-52 Length 170 Rings 34 SRAM XX SL Eagle AXS T-Type Transmission Power Meter 12-Speed Groupset Kit-In-A-Box Mtn Group UPC: 710845928758

by SRAM

—$56.16

When weight is a bigger factor, Shimano BR-MT600 two-piston brake calipers just might be the ticket. They offer the same consistent braking and excellent modulation but shave weight than the four-piston M6220 model. The M6200 incorporates the same features as the entire caliper line, designed to keep braking stable over a wider range of temperatures. Two-piece construction provides a rigid, durable design 2-Piston design prioritizes weight savings and modulation New piston seal, heat resistant resin pistons, and Shimano's low-viscosity oil ensure that braking remains stable over a wide range of temperatures Includes G05S-MX resin pads Recommended for use with Deore BL-M6200 brake levers (sold separately) Item Specifications Brake Caliper Type Post Mount Brake Position Front or Rear Color Black Defined Color Black Hydraulic Fluid Type Mineral Oil Pad Compound Resin Rotor Included No Shimano Deore BR-MT600 Disc Brake Caliper Disc Brake Calipers UPC: 192790999890

by Shimano

—$2,299

With the perfect balance of robustness and weight savings, the SRAM XX Eagle T-Type AXS Transmission groupset has the strength to handle big enduro days with the weight to make it manageable. This T-Type transmission takes a holistic approach to a bicycles shifting, an entire system synchronized, providing you with a superior ride experience. AXS Pod ULT features a click and fire two-button design that transforms the crucial act of rider inputs into a vastly more personal experience for all your AXS controls Engineered as integrated, interdependent transmission components, the XX Eagle T-Type rear derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface XX T-Type derailleur offers the same intuitive pairing and set-up procedure as SRAM's Eagle AXS derailleurs Derailleur features an overload clutch that boosts resiliency and a tucked-in profile that houses protection covers on the fully replaceable B-knuckle and outer link To further its performance, the lower pulley called, "Magic Wheel", keeps spinning if an object becomes lodged Shifting under load is made possible on the XX T-Type 10-52t cassette due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output The XX T-Type DUB carbon cranks, based o Item Specifications Cogs 10-12-14-16-18-21-24-28-32-38-44-52 Length 165 Rings 32 SRAM XX Eagle AXS T-Type Transmission 12-Speed Groupset Kit-In-A-Box Mtn Group UPC: 710845928796

by SRAM

—$56.16

When you need reliably consistent braking action and a streamlined, clean appearance without shelling out big cash, the Deore M6200 brake lever delivers. SERVO WAVE serves up quick pad contact and an optimized power curve, and the new low-viscosity oil helps braking remain stable over a wide range of temperatures. It's also I-SPEC EV compatible for full on-bar system integration. SERVO WAVE technology provides greater power with improved control through rapid pad travel from the first pull Shimano Low Viscosity oil ensures that braking remains stable over a wide range of temperatures A clean aesthetic is achieved by running the hose parallel the the bar, along with I-SPEC EV compatibility for added handlebar adjustability Tooled reach-adjustment for perfect hand fitment Recommended for use with Shimano BR-M6200 and BR-M6220 disc brake calipers (sold separately) Item Specifications Brake Lever Actuation Hydraulic Brake Lever Use Right Color Gray/Black Defined Color List Black Defined Color List Gray Shimano Deore BL-M6200 Brake Lever Hydraulic Brake Lever Part UPC: 192790999159

by Shimano

—$224.64

The Shimano Deore BR-M6220 hydraulic four-piston disc brake calipers bring consistent and full-power braking to the line and is paired with a Deore BL-M6200 brake lever that provides reliably consistent braking action and a streamlined, clean appearance. The calipers are built around a rigid two-piece design and offer better bike control through their new low-viscosity oil, new piston seal and new heat-resistant resin piston, allowing the braking system to stay stable over a wide range of temperatures. The lever features SERVO WAVE technology for quick pad contact and an optimized power curve. It's also I-SPEC EV compatible for full on-bar system integration. Caliper features a two-piece construction that provides a rigid, durable design Dual-diameter 4-piston design, offering high power and control New piston seal, heat resistant resin pistons, and Shimano's low-viscosity oil ensure that braking remains stable over a wide range of temperatures The lever's clean aesthetic is achieved by running the hose parallel the the bar, along with I-SPEC EV compatibility for added handlebar adjustability Tooled reach-adjustment for perfect hand fitment Includes D02S-MX metal pads Item Specifications Adjustable Reach Yes Brake Caliper Type Post Mount Brake Lever Actuation Hydraulic Brake Lever Use Left Color Gray/Black Hydraulic Fluid Type Mineral Oil Hydraulic Hose Length 1000 Pad Compound Metallic Rotor Included No Shimano Deore BR-M6220 Disc Brake and BL-M6200 Lever Disc Brake & Lever UPC: 192790000947

by Shimano

—$169.81

When you need reliably consistent braking action, excellent modulation with a streamlined, clean appearance without shelling out big cash, the Deore M6200 2-piston disc brake and lever delivers. The BR-M6200 2-piece, 2-piston caliper design prioritizes weight savings and modulation. The lever features SERVO WAVE technology for quick pad contact and an optimized power curve, and the new low-viscosity oil helps braking remain stable over a wide range of temperatures. It's also I-SPEC EV compatible for full on-bar system integration. Caliper features two-piece construction to provide a rigid, durable design 2-Piston design prioritizes weight savings and modulation New piston seal, heat resistant resin pistons, and Shimano's low-viscosity oil ensure that braking remains stable over a wide range of temperatures The lever's clean aesthetic is achieved by running the hose parallel the the bar, along with I-SPEC EV compatibility for added handlebar adjustability Tooled reach-adjustment for perfect hand fitment Includes G04S-MX metal pads Item Specifications Adjustable Reach Yes Brake Caliper Type Post Mount Brake Lever Actuation Hydraulic Brake Lever Use Left Color Gray/Black Hydraulic Fluid Type Mineral Oil Hydraulic Hose Length 1000 Pad Compound Metallic Rotor Included No Shimano Deore M6200 Disc Brake and Lever Disc Brake & Lever UPC: 192790000329

by Shimano

—$234.68

The Shimano Deore BR-M6220 hydraulic four-piston disc brake calipers bring consistent and full-power braking to the line and is paired with a Deore BL-M6200 brake lever that provides reliably consistent braking action and a streamlined, clean appearance. The calipers are built around a rigid two-piece design and offer better bike control through their new low-viscosity oil, new piston seal and new heat-resistant resin piston, allowing the braking system to stay stable over a wide range of temperatures. The lever features SERVO WAVE technology for quick pad contact and an optimized power curve. It's also I-SPEC EV compatible for full on-bar system integration. Caliper features a two-piece construction that provides a rigid, durable design Dual-diameter 4-piston design, offering high power and control New piston seal, heat resistant resin pistons, and Shimano's low-viscosity oil ensure that braking remains stable over a wide range of temperatures The lever's clean aesthetic is achieved by running the hose parallel the the bar, along with I-SPEC EV compatibility for added handlebar adjustability Tooled reach-adjustment for perfect hand fitment Includes D02S-MX metal pads Item Specifications Adjustable Reach Yes Brake Caliper Type Post Mount Brake Lever Actuation Hydraulic Brake Lever Use Right Color Gray/Black Hydraulic Fluid Type Mineral Oil Hydraulic Hose Length 1700 Pad Compound Metallic Rotor Included No Shimano Deore BR-M6220 Disc Brake and BL-M6200 Lever Disc Brake & Lever UPC: 192790000985

by Shimano

—$56.16

When you need reliably consistent braking action and a streamlined, clean appearance without shelling out big cash, the Deore M6200 brake lever delivers. SERVO WAVE serves up quick pad contact and an optimized power curve, and the new low-viscosity oil helps braking remain stable over a wide range of temperatures. It's also I-SPEC EV compatible for full on-bar system integration. SERVO WAVE technology provides greater power with improved control through rapid pad travel from the first pull Shimano Low Viscosity oil ensures that braking remains stable over a wide range of temperatures A clean aesthetic is achieved by running the hose parallel the the bar, along with I-SPEC EV compatibility for added handlebar adjustability Tooled reach-adjustment for perfect hand fitment Recommended for use with Shimano BR-M6200 and BR-M6220 disc brake calipers (sold separately) Item Specifications Brake Lever Actuation Hydraulic Brake Lever Use Left Color Gray/Black Defined Color List Black Defined Color List Gray Shimano Deore BL-M6200 Brake Lever Hydraulic Brake Lever Part UPC: 192790999098

by Shimano

—$121.68

The Deore BR-M6220 hydraulic four-piston disc brake calipers bring consistent and full-power braking to the line. The calipers are built around a rigid two-piece design and offer better bike control through their new low-viscosity oil, new piston seal and new heat-resistant resin piston, allowing the braking system to stay stable over a wide range of temperatures. Two-piece construction provides a rigid, durable design Dual-diameter 4-piston design, offering high power and control New piston seal, heat resistant resin pistons, and Shimano's low-viscosity oil ensure that braking remains stable over a wide range of temperatures Includes D02S-MX metal pads Recommended for use Deore BL-M6200 brake levers (sold separately) Compatible with both standard and 2.2mm thick disc brake rotors Item Specifications Brake Caliper Type Post Mount Brake Position Front or Rear Color Gray Defined Color Gray Hydraulic Fluid Type Mineral Oil Pad Compound Metallic Rotor Included No Shimano Deore BR-M6220 Disc Brake Caliper Disc Brake Calipers UPC: 192790999616

by Shimano

—$71.14

When weight is a bigger factor, Deore BR-M6200 two-piston brake calipers just might be the ticket. They offer the same consistent braking and excellent modulation but shave weight than the four-piston M6220 model. The M6200 incorporates the same features as the entire caliper line, designed to keep braking stable over a wider range of temperatures. Two-piece construction provides a rigid, durable design 2-Piston design prioritizes weight savings and modulation New piston seal, heat resistant resin pistons, and Shimano's low-viscosity oil ensure that braking remains stable over a wide range of temperatures Includes G04S-MX metal pads Recommended for use with Deore BL-M6200 brake levers (sold separately) Item Specifications Brake Caliper Type Post Mount Brake Position Front or Rear Color Gray Defined Color Gray Hydraulic Fluid Type Mineral Oil Pad Compound Metallic Rotor Included No Shimano Deore BR-M6200 Disc Brake Caliper Disc Brake Calipers UPC: 192790999531

by Shimano

—$209.99

Concave platform-clipless pedal with mud-shedding 4-sided entry is designed for downhill riding and racing. Mallet DH pedals feature 8 adjustable pins per side, ribbed body for better traction when not clipped in and chamfered leading edges to help reduce rock strikes. Loic Bruni's signature version features an anodized aluminum body, springs, and pins in a metallic bronze hue selected by Loic himself Premium internals: outboard Enduro cartridge bearing, inboard igus II glide bearing and double seal system Aluminum body, Chromoly spindle and Cast Steel wings Brass cleats and plastic shims included Integrated traction pad technology to optimize cleat engagement and shoe tread interface with pedal body Wide 57mm Q-factor for stability at speed 5 year manufacturer's warranty Item Specifications Cleat Interface Crankbrothers Brass Color Loic Bruni Edition Bronze Defined Color Copper Pedal Body Material Aluminum Pedal Spindle 9/16" Pedal Type Dual Sided Clipless with Platform Spindle Material Chromoly Steel Weight 479 Crank Brothers Mallet DH Pedals Pedals UPC: 641300172235

by Crank Brothers

—$2,299

With the perfect balance of robustness and weight savings, the SRAM XX Eagle T-Type AXS Transmission groupset has the strength to handle big enduro days with the weight to make it manageable. This T-Type transmission takes a holistic approach to a bicycles shifting, an entire system synchronized, providing you with a superior ride experience. AXS Pod ULT features a click and fire two-button design that transforms the crucial act of rider inputs into a vastly more personal experience for all your AXS controls Engineered as integrated, interdependent transmission components, the XX Eagle T-Type rear derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface XX T-Type derailleur offers the same intuitive pairing and set-up procedure as SRAM's Eagle AXS derailleurs Derailleur features an overload clutch that boosts resiliency and a tucked-in profile that houses protection covers on the fully replaceable B-knuckle and outer link To further its performance, the lower pulley called, "Magic Wheel", keeps spinning if an object becomes lodged Shifting under load is made possible on the XX T-Type 10-52t cassette due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output The XX T-Type DUB carbon cranks, based o Item Specifications Cogs 10-12-14-16-18-21-24-28-32-38-44-52 Length 170 Rings 32 SRAM XX Eagle AXS T-Type Transmission 12-Speed Groupset Kit-In-A-Box Mtn Group UPC: 710845928789

by SRAM

—$22.13

Consume it straight from the packet before or during activity, spread it on toast, or stir it into tea, Energy Gel is versatile. Energy Gel with added electrolytes for a quick bust of energy on the go 100mg sodium and 24g of carbs per serving Comprised of 95% honey and fortified with B vitamins and electrolytes 100 calories per packet Provides both short and long-term energy Dairy-free, soy-free, nut-free, certified gluten-free Item Specifications Added Sugars 11g Calcium 0mg Calories From Fat 0 Calories 100 Cholesterol 0mg Flavor Raspberry Lemonade Iron 0mg Potassium 50mg Protein 0g Saturated Fat 0g Serving Per Container 12 Serving Size 1 Packet (31g) Sodium 100mg Sugars 11g Total Carbohydrates 24g Total Fat 0g Trans Fat 0g Use During Vitamin D 0mcg Honey Stinger Energy Gel Gel UPC: 810815029369

by Honey Stinger

—$1,759

Pure performance with no compromise. Force AXS builds on the design of previous generations, taking SRAM's fully wireless technology and adding refined ergonomics, effortless braking and further AXS integration. Beyond aesthetics and tech, Force AXS has shed a significant amount of weight, delivering a pro-level, lightweight drivetrain. SRAM Force eTap AXS E2 groupset includes - hydraulic brake/shift eTap lever pair, front and rear flat mount disc calipers, Paceline A2 disc brake rotors, front and rear wireless derailleurs, batteries, charger (cord not included) Force eTap AXS HRD Brake/Shift System provides simple and intuitive eTap shift logic and is AXS enabled for easy personalization Shift/brake lever Bonus Button provides ANT+ device control or auxiliary shift option Force eTap AXS enabled rear derailleur covers cassette ranges from 10-28t up to 10-36t and features larger pulleys to decrease chain articulation and increase efficiency Force 2-Piston flat mount 20mm offset calipers are stiffer are than the previous version 160mm Paceline A2 disc brake rotors features a light weight carrier and a brake track that provides smooth and quiet brake operation Force E1 Flattop chain is lighter, stronger and even more durable than all previous versions Crankset, bottom bracket and cassette sold separately Item Specifications Brake Caliper Type Flat Mount Brake Lever Actuation Hydraulic Brake Type Disc Drivetrain Speeds 12 Front Der/Shifter Compatibility SRAM eTap AXS Front Derailleur Clamp Braze-on Rear Der/Shifter Compatibility SRAM eTap AXS Rotor Included Yes SRAM Force eTap AXS Electronic Groupset E1/E2 Kit-In-A-Box Road Group UPC: 710845929045

by SRAM

—$2,499

With the perfect balance of robustness and weight savings, the SRAM XX Eagle T-Type AXS Transmission Power Meter groupset has the strength to handle big enduro days with the weight to make it manageable. This T-Type transmission takes a holistic approach to a bicycles shifting, an entire system synchronized, providing you with a superior ride experience. AXS Pod ULT features a click and fire two-button design that transforms the crucial act of rider inputs into a vastly more personal experience for all your AXS controls Engineered as integrated, interdependent transmission components, the XX Eagle T-Type rear derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface XX T-Type derailleur offers the same intuitive pairing and set-up procedure as SRAM's Eagle AXS derailleurs Derailleur features an overload clutch that boosts resiliency and a tucked-in profile that houses protection covers on the fully replaceable B-knuckle and outer link To further its performance, the lower pulley called, "Magic Wheel", keeps spinning if an object becomes lodged Shifting under load is made possible on the XX T-Type 10-52t cassette due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output XX Eagle AXS T-Type crankset utilizes Item Specifications Cogs 10-12-14-16-18-21-24-28-32-38-44-52 Length 165 Rings 32 SRAM XX Eagle AXS T-Type Transmission Power Meter 12-Speed Groupset Kit-In-A-Box Mtn Group UPC: 710845928826

by SRAM

—$199.99

The Stamp EVO is 20% longer than the Stamp 7 pedal, enhancing support, stability, and comfort for all your flat pedal riding needs. Because climbing is part of every ride, the Stamp EVO is engineered to get more out of every pedal stroke, helping you ride longer and stronger. The size-specific platform improves foot placement, while a thin, concave profile and 13 adjustable pins per side ensure secure grip. A two-material construction design focuses on durability in the aluminum body, while the replaceable composite bashguards help deflect rock strikes and minimize pedal hang-ups. Built with a chromoly steel spindle and IGUS internals, available in two sizes to Match your shoe size, the Stamp EVO is ready to rip. 114mm x 133mm Platform Large pedals are recommended for shoes sizes 10-15 (43-49) Forged 6061-T6 Aluminum body with reinforced Nylon composite Bashguard with Forged SCM 435 Chromoly Steel Spindle Minimal profile 11mm-15.5mm thin, with a concave platform (2.25mm per side) for secure foothold, and 13 adjustable pins per side for customized grip Igus LL-glide premium bearings and seal system Extra pin kit and bashguards included Item Specifications Color Silver Defined Color Silver Pedal Body Material Aluminum Pedal Spindle 9/16" Pedal Type Platform Spindle Material Chromoly Weight 464 Crank Brothers Stamp EVO Pedals Pedals UPC: 641300172273

by Crank Brothers

—$15.74

Stamp EVO Bashguards are made from reinforced nylon composite and designed to improve deflection from your pedals. These guards reduce hang-ups during rock strikes and hide scratches, keeping your pedals looking good for longer. Fits size small pedals Designed to fit Stamp EVO pedals as a direct replacement Includes Left and Right Bashguards, (4) 23mm Silver Corner Pins, and (4) 23mm Black Corner Pins Not compatible with the Stamp 1, Gen 1 and Gen 2, Stamp 2, Stamp 3, Stamp 7, Stamp 11 pedals Item Specifications Color Dark Grey Defined Color List Gray Material Composite Pedal Body Material Composite Crank Brothers Stamp EVO Bashguards Pedal Small Part UPC: 641300172303

by Crank Brothers

—$22.13

Consume it straight from the packet before or during activity, spread it on toast, or stir it into tea, Energy Gel is versatile. Energy Gel with added electrolytes for a quick bust of energy on the go 100mg sodium and 24g of carbs per serving Comprised of 95% honey and fortified with B vitamins and electrolytes 100 calories per packet Provides both short and long-term energy Dairy-free, soy-free, nut-free, certified gluten-free Item Specifications Added Sugars 11g Calcium 0mg Calories From Fat 0 Calories 100 Cholesterol 0mg Dietary Fiber 0g Flavor Watermelon Lime Iron 0mg Potassium 50mg Protein 0g Saturated Fat 0g Serving Per Container 12 Serving Size 1 Packet (31g) Sodium 100mg Sugars 11g Total Carbohydrates 24g Total Fat 0g Trans Fat 0g Use During Vitamin D 0mcg Honey Stinger Energy Gel Gel UPC: 810815029390

by Honey Stinger

—$199.99

The Stamp EVO is 20% longer than the Stamp 7 pedal, enhancing support, stability, and comfort for all your flat pedal riding needs. Because climbing is part of every ride, the Stamp EVO is engineered to get more out of every pedal stroke, helping you ride longer and stronger. The size-specific platform improves foot placement, while a thin, concave profile and 13 adjustable pins per side ensure secure grip. A two-material construction design focuses on durability in the aluminum body, while the replaceable composite bashguards help deflect rock strikes and minimize pedal hang-ups. Built with a chromoly steel spindle and IGUS internals, available in two sizes to Match your shoe size, the Stamp EVO is ready to rip. 103mm x 117mm Platform Small pedals are recommended for shoes sizes 5-10 (37-43) Forged 6061-T6 Aluminum body with reinforced Nylon composite Bashguard with Forged SCM 435 Chromoly Steel Spindle Minimal profile 11mm-15.5mm thin, with a concave platform (2.25mm per side) for secure foothold, and 13 adjustable pins per side for customized grip Igus LL-glide premium bearings and seal system Extra pin kit and bashguards included Item Specifications Color Silver Defined Color Silver Pedal Body Material Aluminum Pedal Spindle 9/16" Pedal Type Platform Spindle Material Chromoly Weight 418 Crank Brothers Stamp EVO Pedals Pedals UPC: 641300172280

by Crank Brothers

—$199.99

The Stamp EVO is 20% longer than the Stamp 7 pedal, enhancing support, stability, and comfort for all your flat pedal riding needs. Because climbing is part of every ride, the Stamp EVO is engineered to get more out of every pedal stroke, helping you ride longer and stronger. The size-specific platform improves foot placement, while a thin, concave profile and 13 adjustable pins per side ensure secure grip. A two-material construction design focuses on durability in the aluminum body, while the replaceable composite bashguards help deflect rock strikes and minimize pedal hang-ups. Built with a chromoly steel spindle and IGUS internals, available in two sizes to Match your shoe size, the Stamp EVO is ready to rip. 114mm x 133mm Platform Large pedals are recommended for shoes sizes 10-15 (43-49) Forged 6061-T6 Aluminum body with reinforced Nylon composite Bashguard with Forged SCM 435 Chromoly Steel Spindle Minimal profile 11mm-15.5mm thin, with a concave platform (2.25mm per side) for secure foothold, and 13 adjustable pins per side for customized grip Igus LL-glide premium bearings and seal system Extra pin kit and bashguards included Item Specifications Color Black Defined Color Black Pedal Body Material Aluminum Pedal Spindle 9/16" Pedal Type Platform Spindle Material Chromoly Weight 464 Crank Brothers Stamp EVO Pedals Pedals UPC: 641300172259

by Crank Brothers

—$15.74

Stamp EVO Bashguards are made from reinforced nylon composite and designed to improve deflection from your pedals. These guards reduce hang-ups during rock strikes and hide scratches, keeping your pedals looking good for longer. Fits size large pedals Designed to fit Stamp EVO pedals as a direct replacement Includes Left and Right Bashguards, (4) 23mm Silver Corner Pins, and (4) 23mm Black Corner Pins Not compatible with the Stamp 1, Gen 1 and Gen 2, Stamp 2, Stamp 3, Stamp 7, Stamp 11 pedals Item Specifications Color Dark Grey Defined Color List Gray Material Composite Pedal Body Material Composite Crank Brothers Stamp EVO Bashguards Pedal Small Part UPC: 641300172297

by Crank Brothers

—$15.74

Stamp EVO Bashguards are made from reinforced nylon composite and designed to improve deflection from your pedals. These guards reduce hang-ups during rock strikes and hide scratches, keeping your pedals looking good for longer. Fits size small pedals Designed to fit Stamp EVO pedals as a direct replacement Includes Left and Right Bashguards, (4) 23mm Silver Corner Pins, and (4) 23mm Black Corner Pins Not compatible with the Stamp 1, Gen 1 and Gen 2, Stamp 2, Stamp 3, Stamp 7, Stamp 11 pedals Item Specifications Color Black Defined Color List Black Material Composite Pedal Body Material Composite Crank Brothers Stamp EVO Bashguards Pedal Small Part UPC: 641300172501

by Crank Brothers

—$15.74

Stamp EVO Bashguards are made from reinforced nylon composite and designed to improve deflection from your pedals. These guards reduce hang-ups during rock strikes and hide scratches, keeping your pedals looking good for longer. Fits size large pedals Designed to fit Stamp EVO pedals as a direct replacement Includes Left and Right Bashguards, (4) 23mm Silver Corner Pins, and (4) 23mm Black Corner Pins Not compatible with the Stamp 1, Gen 1 and Gen 2, Stamp 2, Stamp 3, Stamp 7, Stamp 11 pedals Item Specifications Color Blue Defined Color List Blue Material Composite Pedal Body Material Composite Crank Brothers Stamp EVO Bashguards Pedal Small Part UPC: 641300172334

by Crank Brothers

—$15.74

Stamp EVO Bashguards are made from reinforced nylon composite and designed to improve deflection from your pedals. These guards reduce hang-ups during rock strikes and hide scratches, keeping your pedals looking good for longer. Fits size small pedals Designed to fit Stamp EVO pedals as a direct replacement Includes Left and Right Bashguards, (4) 23mm Silver Corner Pins, and (4) 23mm Black Corner Pins Not compatible with the Stamp 1, Gen 1 and Gen 2, Stamp 2, Stamp 3, Stamp 7, Stamp 11 pedals Item Specifications Color Blue Defined Color List Blue Material Composite Pedal Body Material Composite Crank Brothers Stamp EVO Bashguards Pedal Small Part UPC: 641300172341

by Crank Brothers

—$15.74

Stamp EVO Bashguards are made from reinforced nylon composite and designed to improve deflection from your pedals. These guards reduce hang-ups during rock strikes and hide scratches, keeping your pedals looking good for longer. Fits size small pedals Designed to fit Stamp EVO pedals as a direct replacement Includes Left and Right Bashguards, (4) 23mm Silver Corner Pins, and (4) 23mm Black Corner Pins Not compatible with the Stamp 1, Gen 1 and Gen 2, Stamp 2, Stamp 3, Stamp 7, Stamp 11 pedals Item Specifications Color Purple Defined Color List Purple Material Composite Pedal Body Material Composite Crank Brothers Stamp EVO Bashguards Pedal Small Part UPC: 641300172327

by Crank Brothers

—$199.99

The Stamp EVO is 20% longer than the Stamp 7 pedal, enhancing support, stability, and comfort for all your flat pedal riding needs. Because climbing is part of every ride, the Stamp EVO is engineered to get more out of every pedal stroke, helping you ride longer and stronger. The size-specific platform improves foot placement, while a thin, concave profile and 13 adjustable pins per side ensure secure grip. A two-material construction design focuses on durability in the aluminum body, while the replaceable composite bashguards help deflect rock strikes and minimize pedal hang-ups. Built with a chromoly steel spindle and IGUS internals, available in two sizes to Match your shoe size, the Stamp EVO is ready to rip. 103mm x 117mm Platform Small pedals are recommended for shoes sizes 5-10 (37-43) Forged 6061-T6 Aluminum body with reinforced Nylon composite Bashguard with Forged SCM 435 Chromoly Steel Spindle Minimal profile 11mm-15.5mm thin, with a concave platform (2.25mm per side) for secure foothold, and 13 adjustable pins per side for customized grip Igus LL-glide premium bearings and seal system Extra pin kit and bashguards included Item Specifications Color Black Defined Color Black Pedal Body Material Aluminum Pedal Spindle 9/16" Pedal Type Platform Spindle Material Chromoly Weight 418 Crank Brothers Stamp EVO Pedals Pedals UPC: 641300172266

by Crank Brothers

—$32.99

The 3-Hole Cleat Kit is designed for road shoes with a 3-hole bolt pattern. Compatibility with Eggbeater, Candy, and Quattro pedals Release angle of 15/20 deg 86g per pair Item Specifications Cleat Bolt Pattern 3-Bolt Cleat Compatibility Crankbrothers Color Brass Float (deg) 6 Material Brass Material Composite Crank Brothers 3-Hole Cleat Kit Pedal Small Part UPC: 641300152893

by Crank Brothers

—$15.74

Stamp EVO Bashguards are made from reinforced nylon composite and designed to improve deflection from your pedals. These guards reduce hang-ups during rock strikes and hide scratches, keeping your pedals looking good for longer. Fits size large pedals Designed to fit Stamp EVO pedals as a direct replacement Includes Left and Right Bashguards, (4) 23mm Silver Corner Pins, and (4) 23mm Black Corner Pins Not compatible with the Stamp 1, Gen 1 and Gen 2, Stamp 2, Stamp 3, Stamp 7, Stamp 11 pedals Item Specifications Color Black Defined Color List Black Material Composite Pedal Body Material Composite Crank Brothers Stamp EVO Bashguards Pedal Small Part UPC: 641300172495

by Crank Brothers

—$799

he CeramicSpeed OSPW Aero ALPHA system for SRAM Red D1/E1 and Force D1 AXS rear derailleurs updates the fastest proven aero derailleur cage to include the CeramicSpeed's patent pending ADR bearing protection and quiet performing ALPHA disc with composite tooth profile pulleys. Furthermore, a speed defying pinstripe graphic has been added for a splash of visual motion. This version 2 system is compatible with both SRAM RED D1/E1 and Force D1 AXS rear derailleurs with or without the newly added spring tension holes Injection Molded Carbon Fiber reinforced PA Aero cage reduces aerodynamic drag on the rear derailleur by up to 60% and offers new levels of strength and durability Alpha disc pulleys are paired with a composite, narrow-wide tooth profile to help prevent debris from external objects getting stuck The 15-tooth upper and 19-tooth lower Alpha pulley wheels feature ADR bearing protection that completely encloses the bearings This OSPW System has handbuilt CeramicSpeed bearings installed in each pulley and feartures Grade 3 Silicon Nitride ball bearings that are 400% smoother, 128% harder and 58% lighter than standard steel balls normally used in the bicycle industry 2 customizable spring tension settings for optimal setup It is not possible to add these pulleys to a previous generation OSPW Aero cage Item Specifications Defined Color Black Drivetrain Speeds 12 Fits Brand SRAM Fits Model Red D1/E1 and Force D1 Largest Cog 36 CeramicSpeed OSPW Pulley Wheel Aero Alpha System for SRAM Red D1/E1 and Force D1 AXS - v2 Cage Assembly EAN: 5711050156481

by CeramicSpeed

—$1,995

CeramicSpeed's OSPW RS for SRAM Force E1 and Rival E1 AXS has been lifted with a distinctly modern and angular design. The updated design brings balance and refinement to the OSPW RS System allowing it to blend seamlessly into the contemporary design trends of bikes and groupsets - making up the whole of which the OSPW System is part. Innovative tech features of the OSPW RS meets consumer demands for a premium ride experience. The design for the OSPW RS isn't solely a visual update. The cage itself has been reinforced to offer new levels of strength and durability. The CeramicSpeed OSPW RS System continues the tradition of providing optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Injection Molded Carbon Fiber reinforced PA cage offers new levels of strength and durability Premium 3D printed hollow titanium 15-tooth upper and 19-tooth lower pulley wheels are exceptionally light weight and incredibly durable and feature an oil slick PVD coating for added protection with great looks This OSPW System has handbuilt CeramicSpeed coated bearings installed in each pulley and features Grade 3 Silicon Nitride ball bearings that are 400% smoother, 128% harder and 58% lighter than standard steel balls normally used in the bicycle industry 2 customizable spring tension settings for optimal setup Compatible with SRAM Force E1 and SRAM Force E1 AXS rear derailleurs Note; this OSPW system is not compatible with the SRAM Force XPLR or Rival XPLR eTap AXS rear derailleurs Item Specifications Defined Color Black Defined Color Silver Drivetrain Speeds 12 Fits Brand SRAM Fits Model Force E1 and Rival E1 Largest Cog 36 CeramicSpeed OSPW RS Pulley Wheel System for SRAM Force E1 and Rival E1 AXS Cage Assembly EAN: 5711050150236

by CeramicSpeed

—$699

CeramicSpeed's OSPW RS Alpha System for SRAM RED D1/E1 and Force D1 AXS rear derailleurs has been lifted lifted into the future with a distinctly modern and angular design. The updated design brings balance and refinement to the OSPW System allowing it to blend seamlessly into the contemporary design trends of bikes and groupsets - making up the whole of which the OSPW System is part. Innovative tech features of the OSPW RS Alpha meets consumer demands for a premium ride experience. The design for the OSPW RS Alpha isn't solely a visual update. The cage itself has been reinforced to offer new levels of strength and durability. The CeramicSpeed OSPW RS Alpha System continues the tradition of providing optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. This version 2 system is compatible with both SRAM RED D1/E1 and Force D1 AXS rear derailleurs with or without the newly added spring tension holes Injection Molded Carbon Fiber reinforced PA cage offers new levels of strength and durability Alpha disc pulleys are paired with a composite, narrow-wide tooth profile to help prevent debris from external objects getting stuck between the spokes The 15-tooth upper and 19-tooth lower Alpha pulley wheels feature ADR (Active Debris Remover) bearing protection that completely encloses the bearings This OSPW System has handbuilt CeramicSpeed bearings installed in each pulley and feartures Grade 3 Silicon Nitride ball bearings that are 400% smoother, 128% harder and 58% lighter than standard steel balls normally used in the bicycle industry 2 customizable spring tension settings for optimal setup Item Specifications Defined Color Black Defined Color Red Drivetrain Speeds 12 Fits Brand SRAM Fits Model Red D1/E1 and Force D1 Largest Cog 36 CeramicSpeed OSPW RS Alpha Pulley Wheel System for SRAM Red D1/E1 and Force D1 AXS - v2 Cage Assembly EAN: 5711050156610

by CeramicSpeed

—$699

CeramicSpeed's OSPW RS Alpha System for SRAM Force E1 and Rival E1 rear derailleurs has been lifted lifted into the future with a distinctly modern and angular design. The updated design brings balance and refinement to the OSPW System allowing it to blend seamlessly into the contemporary design trends of bikes and groupsets - making up the whole of which the OSPW System is part. Innovative tech features of the OSPW RS Alpha meets consumer demands for a premium ride experience. The design for the OSPW RS Alpha isn't solely a visual update. The cage itself has been reinforced to offer new levels of strength and durability. The CeramicSpeed OSPW RS Alpha System continues the tradition of providing optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Injection Molded Carbon Fiber reinforced PA cage offers new levels of strength and durability Alpha disc pulleys are paired with a composite, narrow-wide tooth profile to help prevent debris from external objects getting stuck between the spokes The 15-tooth upper and 19-tooth lower Alpha pulley wheels feature ADR (Active Debris Remover) bearing protection that completely encloses the bearings This OSPW System has handbuilt CeramicSpeed bearings installed in each pulley and feartures Grade 3 Silicon Nitride ball bearings that are 400% smoother, 128% harder and 58% lighter than standard steel balls normally used in the bicycle industry 2 customizable spring tension settings for optimal setup Item Specifications Defined Color Black Defined Color Silver Drivetrain Speeds 12 Fits Brand SRAM Fits Model Force E1 and Rival E1 Largest Cog 36 CeramicSpeed OSPW RS Alpha Pulley Wheel System for SRAM Force E1 and Rival E1 Cage Assembly EAN: 5711050150151

by CeramicSpeed

—$15.74

Stamp EVO Bashguards are made from reinforced nylon composite and designed to improve deflection from your pedals. These guards reduce hang-ups during rock strikes and hide scratches, keeping your pedals looking good for longer. Fits size large pedals Designed to fit Stamp EVO pedals as a direct replacement Includes Left and Right Bashguards, (4) 23mm Silver Corner Pins, and (4) 23mm Black Corner Pins Not compatible with the Stamp 1, Gen 1 and Gen 2, Stamp 2, Stamp 3, Stamp 7, Stamp 11 pedals Item Specifications Color Purple Defined Color List Purple Material Composite Pedal Body Material Composite Crank Brothers Stamp EVO Bashguards Pedal Small Part UPC: 641300172310

by Crank Brothers

—$629

CeramicSpeed's OSPW RS for SRAM Force E1 and Rival E1 AXS has been lifted with a distinctly modern and angular design. The updated design brings balance and refinement to the OSPW RS System allowing it to blend seamlessly into the contemporary design trends of bikes and groupsets - making up the whole of which the OSPW System is part. Innovative tech features of the OSPW RS meets consumer demands for a premium ride experience. The design for the OSPW RS isn't solely a visual update. The cage itself has been reinforced to offer new levels of strength and durability. The CeramicSpeed OSPW RS System continues the tradition of providing optimization and increased efficiency of the rear derailleur through its extremely low-friction bearings and unique overall design. Injection Molded Carbon Fiber reinforced PA cage offers new levels of strength and durability Anodized aluminum 5-spoke 15-tooth upper and 19-tooth lower pulley wheels are light weight and durable This OSPW System has handbuilt CeramicSpeed bearings installed in each pulley and features Grade 3 Silicon Nitride ball bearings that are 400% smoother, 128% harder and 58% lighter than standard steel balls normally used in the bicycle industry 2 customizable spring tension settings for optimal setup Compatible with SRAM Force E1 and SRAM Force E1 AXS rear derailleurs Note; this OSPW system is not compatible with the SRAM Force XPLR or Rival XPLR eTap AXS rear derailleurs Item Specifications Defined Color Black Drivetrain Speeds 12 Fits Brand SRAM Fits Model Force E1 and Rival E1 Largest Cog 36 CeramicSpeed OSPW RS Pulley Wheel System for SRAM Force E1 and Rival E1 AXS Cage Assembly EAN: 5711050150199

by CeramicSpeed