Ohlins

—$20.49

Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 10 mm x 20 mm (10 mm diameter bolt hole and 20 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 10 Frame Mount Width 20 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153641985

by Ohlins

—$55

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 150 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640384

by Ohlins

—$245

This air spring shaft kits are used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins. This 130mm air spring shaft kit is used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins The original fork's top cap is reused; only the shaft assembly is replaced The kit includes the lower shaft assembly, all dynamic air piston seals, new circlips, and a new footnut The air shaft has 4 negative volume spacers installed from the factory, which are adjustable to customize the level of support and suppleness in addition to the adjustable volume in the main spring Interchangeable with RXF34 chassis Ohlins Air Spring Shaft Assembly Air Springs & Parts UPC: 840153641404

by Ohlins

—$300

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 170mm air spring cartridge for the RXF38 m.2 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup Ohlins Complete Air Spring Cartridge Assembly Air Springs & Parts UPC: 840153644702

by Ohlins

—$63

Change the stroke on the Ohlins TTX Air m.1 rear shock by unthreading the end-eye and sliding these spacers onto the shaft to get the correct stroke. All TTX Air shocks arrive from the factory set up in the longest stroke. Intended for the m.1 version of the TTX Air Kit includes (4) stroke reducing spacers and (1) stroke/volume reducer Spacer one (7mm long = Full stroke), Spacer two (9.5mm long = Reduces stroke 2.5mm, Spacer three (12mm long = Reduces stroke 5mm, Spacer 4 (14.5mm long = Reduces stroke 7.5mm The 7.5mm stroke/volume reducer is larger with a different appearance due to it serving as both an air volume reducer as well as the stroke reducer Ohlins Rear Shock Stroke Spacer Rear Shock Tune Kits UPC: 840153640513

by Ohlins

—$88

The Ohlins 200 hour rebuild kit for their suspension fork air spring cartridges includes all major wear items for a more thorough rebuild. Thorough rebuild kit (also called the "200-hour" kit) for the 3-chamber air spring cartridge The 3-chamber air spring cartridge is found in all RXF36, RXF38, and DH38 forks Use this kit if the fork has skipped a few services, has been abused, or exhibits any signs of leaking Includes less common wear items, such as Schrader valves, IFP bump rubber, and seal head scrapers (Please note that not all parts will be used upon completion Individually labeled when necessary to ease identification Ohlins 200 Hour Air Spring Rebuild Kit Service Kit UPC: 840153641510

by Ohlins

—$55

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 140 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640377

by Ohlins

—$55

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 180 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640414

by Ohlins

—$55

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 90mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm 90 mm tube intended to convert RXF36 forks for dirt jumping Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640438

by Ohlins

—$140

Achieve a perfectly tuned suspension with the Ohlins lightweight spring series. With a wide range of spring rates available, you can easily find the right spring for your bike and riding style. The latest generation of their spring series combines race-ready weights with big mountain strength. Cutting-edge heat treatments and advanced materials enable Ohlins to stress their spring coils more intensely without damage, allowing them to build them stronger and lighter than ever before. All spring series come in increments as small as 4 Nm/23 lbs/in, making it easy to find a spring that suits your bike and riding style If you require more than two turns of preload, we recommend switching to a stiffer spring to achieve optimal performance Item Specifications I.D. (mm) 36 Material Steel Spring Weight 574 Stroke (ins) 2.25 Ohlins Rear Shock Lightweight Coil Spring Rear Shock Spring UPC: 840153641671

by Ohlins

—$140

Achieve a perfectly tuned suspension with the Ohlins lightweight spring series. With a wide range of spring rates available, you can easily find the right spring for your bike and riding style. The latest generation of their spring series combines race-ready weights with big mountain strength. Cutting-edge heat treatments and advanced materials enable Ohlins to stress their spring coils more intensely without damage, allowing them to build them stronger and lighter than ever before. All spring series come in increments as small as 4 Nm/23 lbs/in, making it easy to find a spring that suits your bike and riding style If you require more than two turns of preload, we recommend switching to a stiffer spring to achieve optimal performance Item Specifications I.D. (mm) 36 Material Steel Spring Weight 708 Stroke (ins) 2.65 Ohlins Rear Shock Lightweight Coil Spring Rear Shock Spring UPC: 840153641879

by Ohlins

—$140

Achieve a perfectly tuned suspension with the Ohlins lightweight spring series. With a wide range of spring rates available, you can easily find the right spring for your bike and riding style. The latest generation of their spring series combines race-ready weights with big mountain strength. Cutting-edge heat treatments and advanced materials enable Ohlins to stress their spring coils more intensely without damage, allowing them to build them stronger and lighter than ever before. All spring series come in increments as small as 4 Nm/23 lbs/in, making it easy to find a spring that suits your bike and riding style If you require more than two turns of preload, we recommend switching to a stiffer spring to achieve optimal performance Item Specifications I.D. (mm) 36 Material Steel Spring Weight 741 Stroke (ins) 2.25 Ohlins Rear Shock Lightweight Coil Spring Rear Shock Spring UPC: 840153623578

by Ohlins

—$140

Achieve a perfectly tuned suspension with the Ohlins lightweight spring series. With a wide range of spring rates available, you can easily find the right spring for your bike and riding style. The latest generation of their spring series combines race-ready weights with big mountain strength. Cutting-edge heat treatments and advanced materials enable Ohlins to stress their spring coils more intensely without damage, allowing them to build them stronger and lighter than ever before. All spring series come in increments as small as 4 Nm/23 lbs/in, making it easy to find a spring that suits your bike and riding style If you require more than two turns of preload, we recommend switching to a stiffer spring to achieve optimal performance Item Specifications I.D. (mm) 36 Material Steel Spring Weight 640 Stroke (ins) 2.25 Ohlins Rear Shock Lightweight Coil Spring Rear Shock Spring UPC: 888818362752

by Ohlins

—$140

Achieve a perfectly tuned suspension with the Ohlins lightweight spring series. With a wide range of spring rates available, you can easily find the right spring for your bike and riding style. The latest generation of their spring series combines race-ready weights with big mountain strength. Cutting-edge heat treatments and advanced materials enable Ohlins to stress their spring coils more intensely without damage, allowing them to build them stronger and lighter than ever before. All spring series come in increments as small as 4 Nm/23 lbs/in, making it easy to find a spring that suits your bike and riding style If you require more than two turns of preload, we recommend switching to a stiffer spring to achieve optimal performance Item Specifications I.D. (mm) 36 Material Steel Spring Weight 343 Stroke (ins) 3 Ohlins Rear Shock Lightweight Coil Spring Rear Shock Spring UPC: 888818362660

by Ohlins

—$140

Achieve a perfectly tuned suspension with the Ohlins lightweight spring series. With a wide range of spring rates available, you can easily find the right spring for your bike and riding style. The latest generation of their spring series combines race-ready weights with big mountain strength. Cutting-edge heat treatments and advanced materials enable Ohlins to stress their spring coils more intensely without damage, allowing them to build them stronger and lighter than ever before. All spring series come in increments as small as 4 Nm/23 lbs/in, making it easy to find a spring that suits your bike and riding style If you require more than two turns of preload, we recommend switching to a stiffer spring to achieve optimal performance Item Specifications I.D. (mm) 36 Material Steel Spring Weight 502 Stroke (ins) 2.25 Ohlins Rear Shock Lightweight Coil Spring Rear Shock Spring UPC: 888818362769

by Ohlins

—$140

Achieve a perfectly tuned suspension with the Ohlins lightweight spring series. With a wide range of spring rates available, you can easily find the right spring for your bike and riding style. The latest generation of their spring series combines race-ready weights with big mountain strength. Cutting-edge heat treatments and advanced materials enable Ohlins to stress their spring coils more intensely without damage, allowing them to build them stronger and lighter than ever before. All spring series come in increments as small as 4 Nm/23 lbs/in, making it easy to find a spring that suits your bike and riding style If you require more than two turns of preload, we recommend switching to a stiffer spring to achieve optimal performance Item Specifications I.D. (mm) 36 Material Steel Spring Weight 502 Stroke (ins) 3 Ohlins Rear Shock Lightweight Coil Spring Rear Shock Spring UPC: 888818362899

by Ohlins

—$140

Achieve a perfectly tuned suspension with the Ohlins lightweight spring series. With a wide range of spring rates available, you can easily find the right spring for your bike and riding style. The latest generation of their spring series combines race-ready weights with big mountain strength. Cutting-edge heat treatments and advanced materials enable Ohlins to stress their spring coils more intensely without damage, allowing them to build them stronger and lighter than ever before. All spring series come in increments as small as 4 Nm/23 lbs/in, making it easy to find a spring that suits your bike and riding style If you require more than two turns of preload, we recommend switching to a stiffer spring to achieve optimal performance Item Specifications I.D. (mm) 36 Material Steel Spring Weight 365 Stroke (ins) 3 Ohlins Rear Shock Lightweight Coil Spring Rear Shock Spring UPC: 888818362783

by Ohlins

—$140

Achieve a perfectly tuned suspension with the Ohlins lightweight spring series. With a wide range of spring rates available, you can easily find the right spring for your bike and riding style. The latest generation of their spring series combines race-ready weights with big mountain strength. Cutting-edge heat treatments and advanced materials enable Ohlins to stress their spring coils more intensely without damage, allowing them to build them stronger and lighter than ever before. All spring series come in increments as small as 4 Nm/23 lbs/in, making it easy to find a spring that suits your bike and riding style If you require more than two turns of preload, we recommend switching to a stiffer spring to achieve optimal performance Item Specifications I.D. (mm) 36 Material Steel Spring Weight 480 Stroke (ins) 3 Ohlins Rear Shock Lightweight Coil Spring Rear Shock Spring UPC: 888818362585

by Ohlins

—$925

Experience the next generation of big-hit suspension technology. With better end stroke control and an improved adjustment range, the TTX22m.2 coil rear shock (Coil spring separately) builds on the supreme levels of performance, traction, and control that made the original TTX22 the go-to shock choice for professional gravity riders. The TTX22m.2 bottom out performance significantly improves mid- to end-stroke control as a result of earlier engagement and more consistent, predictable support. In addition, the TTX22m.2 features easier stroke adjustment, wider adjustment range, and improved fitting. Coil spring is sold separately. New bump rubber, in combination with the cup it sits in, acts as a second spring, loading and releasing energy to ensure the rider returns back into position after a heavy compression in a quick, controlled manner (Coil spring sold separately) Spring curve of the shock improves performance for less progressive bikes that require more end-stroke support New design boasts the added effect of lowering the risk for a hard bottom out that could impact handling Changing both spring and stroke is an easy operation on the TTX22m.2 with no special tools and no shock disassembly needed to perform the operation Updated blue trail high-speed compression valve provides a wider adjustment range to give the rider more distinct alternatives to choose between when customizing setup External adjustments include: 3-level high-speed compression adjustment, 16-click low-speed compression adjustment, 7-click rebound adjustment Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 210 Eyelet Diameter (mm) 12.7 Lockout Switch Shock Mounted Switch Positive Spring Coil Stroke (mm) 55 Ohlins TTX22 m.2 Coil Rear Shock Rear Shock UPC: 840153624186

by Ohlins

—$1,550

The new RXF38 m.3 features reworked internals and updated settings, built around the race-proven TTX18 damper cartridge. This stiff fork is the perfect match for e-MTBs, aggressive trail riding and enduro racing, delivering significant performance upgrades on every ride. The new RXF38 m.3 fork delivers hard-hitting, dual-crown downhill performance in a single-crown design, with improvements in comfort, sensitivity, and bottom-out control. Bottom-out progressiveness has been increased with the addition of a spring booster, and the system is further optimized for use with volume spacers, giving riders greater flexibility to fine-tune their ride feel. With these upgrades, the new RXF38 m.3 fork is the most advanced trail fork Ohlins has ever created and your top choice when the trails get steeper, the rock gardens rougher, and the gaps bigger. The RXF38 m.3 s adjustment range provides 16 clicks of low-speed compression, 3 clicks of high-speed compression, and 16 clicks of rebound adjustment Cartridge-based air spring allows for quick swaps between air and coil setups when needed (coil cartridge sold separately) Features Ohlins floating axle design to minimize friction and weighs 2,320 g (with bolts and axle) For 29 wheel sized frames New surface treatment on the 38mm stanchions improves small-bump sensitivity and overall ride smoothness in the new RXF38 m.3 Updated lowers feature a gloss black finish and bold new graphics, ensuring riders can both feel and see the next level of performance every time they hit the trail or park 15mm x 110mm boost floating thru-axle axle design to minimize friction eMTB approved Item Specifications Axle to Crown Length 593 Brake Type Post Mount 200 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Tapered Travel (mm) 180 Weight 2320 Wheel Size 29" Ohlins RXF38 m.3 Suspension Fork Suspension Fork UPC: 840153644399

by Ohlins

—$1,350

The RXF36 m.3 features an all-new chassis built around the race-proven TTX18 damper cartridge. This lightweight and highly progressive fork is fully optimized for demanding, next-level trail riding performance. The Ohlins race-winning TTX18 damping technology from the DH38 Race Fork has been adapted to deliver its renowned top-tier traction and control on the most demanding trails. The updated settings and reduced chassis friction offers improved sensitivity for greater traction and comfort to conquer any trail~With the new chassis, the fork delivers ultra-sensitive tracking over small bumps while maintaining Ohlins' signature precise steering and predictable handling-no matter how long or hard it's pushed. RXF36 m.3 features increased internal bushing overlap and an optimized configuration for 29 wheels Race-proven adjustment range is specifically designed for tough trails and provides 16 clicks of low-speed compression, 3 clicks of high-speed compression, and 16 clicks of rebound adjustment Features Ohlins' floating axle design for minimal friction and weighs 2050 g (with bolts and axle) The retuned, twin piston, three chamber air-spring system allows you to completely dial-in the level of progression from the initial movement, right through to the bottom out Air spring is cartridge-based, allowing for easy swaps between coil and air if desired (coil cartridge sold separately) New surface treatment on the 36mm stanchions lowers the friction, boosts small bump sensitivity and overall ride smoothness Updated lowers feature a gloss black finish and bold new graphics, ensuring riders can feel and see the next level of performance every time they hit the trail or park 15mm x 110mm boost floating thru-axle a Item Specifications Axle to Crown Length 573 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Type Tapered Travel (mm) 160 Weight 2050 Wheel Size 29" Ohlins RXF36 m.3 Suspension Fork Suspension Fork UPC: 840153642890

by Ohlins

—$1,550

The new RXF38 m.3 features reworked internals and updated settings, built around the race-proven TTX18 damper cartridge. This stiff fork is the perfect match for e-MTBs, aggressive trail riding and enduro racing, delivering significant performance upgrades on every ride. The new RXF38 m.3 fork delivers hard-hitting, dual-crown downhill performance in a single-crown design, with improvements in comfort, sensitivity, and bottom-out control. Bottom-out progressiveness has been increased with the addition of a spring booster, and the system is further optimized for use with volume spacers, giving riders greater flexibility to fine-tune their ride feel. With these upgrades, the new RXF38 m.3 fork is the most advanced trail fork Ohlins has ever created and your top choice when the trails get steeper, the rock gardens rougher, and the gaps bigger. The RXF38 m.3 s adjustment range provides 16 clicks of low-speed compression, 3 clicks of high-speed compression, and 16 clicks of rebound adjustment Cartridge-based air spring allows for quick swaps between air and coil setups when needed (coil cartridge sold separately) Features Ohlins floating axle design to minimize friction and weighs 2,320 g (with bolts and axle) For 29 wheel sized frames New surface treatment on the 38mm stanchions improves small-bump sensitivity and overall ride smoothness in the new RXF38 m.3 Updated lowers feature a gloss black finish and bold new graphics, ensuring riders can both feel and see the next level of performance every time they hit the trail or park 15mm x 110mm boost floating thru-axle axle design to minimize friction eMTB approved Item Specifications Axle to Crown Length 573 Brake Type Post Mount 200 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Tapered Travel (mm) 160 Weight 2320 Wheel Size 29" Ohlins RXF38 m.3 Suspension Fork Suspension Fork UPC: 840153644368

by Ohlins

—$470

hlins offers four different crown sets for DH38 suspension fork that differ in offset, allowing riders to further customize their ride. Offset is the distance between the wheel axle and the steerer tube and affects how the bike steers by changing the "trail" dimension. There are three different offsets: 46mm, 50mm, 54mm, and 58mm. Typically, shorter offsets are more stable but require more steering input to change direction. The opposite is true, too; the longer the offset, the easier it is to steer, but it will be less stable at speed. Most DH bikes with 29" wheels use 58mm and 54mm offset, while DH bikes with 27.5" front wheels use 46mm. Provides 50mm offset to DH38 suspension forks Includes one lower crown with a straight 1.125" steerer tube pressed in Includes two upper crowns; one flat, one drop crown Comes with two rubber fork bumpers M6 x 16 clamp bolts Black Anodized Finish Ohlins DH38 Suspension Fork Crownset Crown/Steerer/Uppertube Assembly UPC: 840153633492

by Ohlins

—$925

Experience the next generation of big-hit suspension technology. With better end stroke control and an improved adjustment range, the TTX22m.2 coil rear shock (Coil spring separately) builds on the supreme levels of performance, traction, and control that made the original TTX22 the go-to shock choice for professional gravity riders. The TTX22m.2 bottom out performance significantly improves mid- to end-stroke control as a result of earlier engagement and more consistent, predictable support. In addition, the TTX22m.2 features easier stroke adjustment, wider adjustment range, and improved fitting. Coil spring is sold separately. New bump rubber, in combination with the cup it sits in, acts as a second spring, loading and releasing energy to ensure the rider returns back into position after a heavy compression in a quick, controlled manner (Coil spring sold separately) Spring curve of the shock improves performance for less progressive bikes that require more end-stroke support New design boasts the added effect of lowering the risk for a hard bottom out that could impact handling Changing both spring and stroke is an easy operation on the TTX22m.2 with no special tools and no shock disassembly needed to perform the operation Updated blue trail high-speed compression valve provides a wider adjustment range to give the rider more distinct alternatives to choose between when customizing setup External adjustments include: 3-level high-speed compression adjustment, 16-click low-speed compression adjustment, 7-click rebound adjustment Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 225 Eyelet Diameter (mm) 12.7 Lockout Switch Shock Mounted Switch Positive Spring Coil Stroke (mm) 75 Ohlins TTX22 m.2 Coil Rear Shock Rear Shock UPC: 840153624230

by Ohlins

—$925

Experience the next generation of big-hit suspension technology. With better end stroke control and an improved adjustment range, the TTX22m.2 coil rear shock (Coil spring separately) builds on the supreme levels of performance, traction, and control that made the original TTX22 the go-to shock choice for professional gravity riders. The TTX22m.2 bottom out performance significantly improves mid- to end-stroke control as a result of earlier engagement and more consistent, predictable support. In addition, the TTX22m.2 features easier stroke adjustment, wider adjustment range, and improved fitting. Coil spring is sold separately. New bump rubber, in combination with the cup it sits in, acts as a second spring, loading and releasing energy to ensure the rider returns back into position after a heavy compression in a quick, controlled manner (Coil spring sold separately) Spring curve of the shock improves performance for less progressive bikes that require more end-stroke support New design boasts the added effect of lowering the risk for a hard bottom out that could impact handling Changing both spring and stroke is an easy operation on the TTX22m.2 with no special tools and no shock disassembly needed to perform the operation Updated blue trail high-speed compression valve provides a wider adjustment range to give the rider more distinct alternatives to choose between when customizing setup External adjustments include: 3-level high-speed compression adjustment, 16-click low-speed compression adjustment, 7-click rebound adjustment Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 205 Eyelet Diameter (mm) 12.7 Lockout Switch Shock Mounted Switch Positive Spring Coil Stroke (mm) 65 Ohlins TTX22 m.2 Coil Rear Shock Rear Shock UPC: 840153624223

by Ohlins

—$115.69

Ohlin's latest generation spring series combines race-ready weights with big mountain strength. Cutting edge heat treatments and advanced materials enable us to stress our spring coils harder without damage, meaning we can build them stronger and lighter than before. All spring series come with as little as 4 Nm/23 lbs increments enabling you to find the perfect spring for your bike and riding style. If you need more than two turns of preload, we recommend switching to a stiffer spring in order to get the best performance. Spring weight is ~2 lbs 67mm Stroke (18077 series) 36mm ID x 120-130mm H If you have any questions regarding this item please reach out to our educated customer service staff. 805-375-4525. Ohlins Coil Rear Shock Spring

by Ohlins

—$115.69

Ohlin's latest generation spring series combines race-ready weights with big mountain strength. Cutting edge heat treatments and advanced materials enable us to stress our spring coils harder without damage, meaning we can build them stronger and lighter than before. All spring series come with as little as 4 Nm/23 lbs increments enabling you to find the perfect spring for your bike and riding style. If you need more than two turns of preload, we recommend switching to a stiffer spring in order to get the best performance. Spring weight is ~2 lbs 67mm Stroke (18077 series) 36mm ID x 120-130mm H If you have any questions regarding this item please reach out to our educated customer service staff. 805-375-4525. Ohlins Coil Rear Shock Spring

by Ohlins

—$115.69

Ohlin's latest generation spring series combines race-ready weights with big mountain strength. Cutting edge heat treatments and advanced materials enable us to stress our spring coils harder without damage, meaning we can build them stronger and lighter than before. All spring series come with as little as 4 Nm/23 lbs increments enabling you to find the perfect spring for your bike and riding style. If you need more than two turns of preload, we recommend switching to a stiffer spring in order to get the best performance. Spring weight is ~2 lbs 67mm Stroke (18077 series) 36mm ID x 120-130mm H If you have any questions regarding this item please reach out to our educated customer service staff. 805-375-4525. Ohlins Coil Rear Shock Spring

by Ohlins

—$115.69

Ohlin's latest generation spring series combines race-ready weights with big mountain strength. Cutting edge heat treatments and advanced materials enable us to stress our spring coils harder without damage, meaning we can build them stronger and lighter than before. All spring series come with as little as 4 Nm/23 lbs increments enabling you to find the perfect spring for your bike and riding style. If you need more than two turns of preload, we recommend switching to a stiffer spring in order to get the best performance. Spring weight is ~2 lbs 67mm Stroke (18077 series) 36mm ID x 120-130mm H If you have any questions regarding this item please reach out to our educated customer service staff. 805-375-4525. Ohlins Coil Rear Shock Spring

by Ohlins

—$780

It is a high performing and robust air sprung shock that utilizes on the possibilities made by the metric system. By combining the superior damping function of the TTX system together with a completely new air spring design it was possible to improve both performance as well as robustness. Ohlins brought the TTX concept into MTB market and the technology set a new standard in damping function, a path followed by competitor companies. The TTX Air improves on an already proven package in terms of damping performance and making individual tuning simple. The air spring design take full advantage of the possibilities introduced by the metric design. Added support and bushing overlap made a more robust air spring with improved side load management. This along with a specific wiper seal and air sleeve lubrication reduces friction throughout the service interval. The TTX Air shock makes it a bit easier to find the right shock for your bike! With the many different stroke lengths today Ohlins thought it made sense to be able to sell 1 length eye to eye shock and offer that same shock with the ability to switch between stroke length for the proper stoke. An added plus with the ability to switch these travel spacers is if your bike is cabable of "long shocking" where you can get a bit more rear travel this gives you the ability to make that change and change it back if you don't like that travel setup! Features TTX-technology Adjustable low speed compression Adjustable rebound High speed compression adjuster Air spring volume spacers included in kit Metric 190/210/230 mm lengths Climb mode Ohlins TTX Air Rear Shock Rear Shock

by Ohlins

—$115.69

Ohlin's latest generation spring series combines race-ready weights with big mountain strength. Cutting edge heat treatments and advanced materials enable us to stress our spring coils harder without damage, meaning we can build them stronger and lighter than before. All spring series come with as little as 4 Nm/23 lbs increments enabling you to find the perfect spring for your bike and riding style. If you need more than two turns of preload, we recommend switching to a stiffer spring in order to get the best performance. If you have any questions regarding this item please reach out to our educated customer service staff. 805-375-4525. Ohlins Coil Rear Shock Spring

by Ohlins

—$115.69

Ohlin's latest generation spring series combines race-ready weights with big mountain strength. Cutting edge heat treatments and advanced materials enable us to stress our spring coils harder without damage, meaning we can build them stronger and lighter than before. All spring series come with as little as 4 Nm/23 lbs increments enabling you to find the perfect spring for your bike and riding style. If you need more than two turns of preload, we recommend switching to a stiffer spring in order to get the best performance. If you have any questions regarding this item please reach out to our educated customer service staff. 805-375-4525. Ohlins Coil Rear Shock Spring

by Ohlins

—$825

The Ohlins TTX1 Air m.2 rear shock is designed for trail bikes and eMTBs with more linear suspension systems and builds on their race-proven foundation of damping performance. It offers the same exceptional trail-smoothing capabilities as their double-can TTX2Air m.2 but comes in a slimmer and lighter single-can size. The TTX1Air m.2 is a formidable and versatile choice for riders seeking a lighter or more compact shock without compromising capability and tuning options. With upgrades across key areas, it delivers more precise fine-tuning, unmatched comfort and sensitivity, and stands as the most well-balanced, predictable damper they've created to date. Riders now have a broader range of tuning options to perfectly match their bike and riding style-whether pushing limits between the tape or just riding for fun. A high-performing and robust air sprung shock that offers exceptional trail-smoothing capabilities With reduced friction and enhanced sensitivity and comfort, combined with ultimate traction and control, the shock now delivers an even more refined coil-like feel Elevated ride quality is made possible by new seals and the introduction of a bladder system, resulting in better rear-wheel control and improved ground contact Features an improved pedal platform that provides better support when pushing hard and efficiently through challenging climbs Redesigned spacer system makes it easier than ever to adjust the air volume in the positive chamber and stroke adjustment has also been simplified, and there is no longer any need to remove the end-eye for modification (Delivered with the longest stroke, plus the additional parts required to alter the stroke) Redesigned adjustment knob for quicker, more intuitive tuning, allowing riders to fine-tune their setup on the fly Compact end-eye design for better compatibility Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 185 Eyelet Diameter (mm) 12.7 Lockout Switch Shock Mounted Switch Positive Spring Air Stroke (mm) 55 Ohlins TTX1 Air m.2 Rear Shock Rear Shock

by Ohlins

—$819.50

The Ohlins TTX1 Air m.2 rear shock is designed for trail bikes and eMTBs with more linear suspension systems and builds on their race-proven foundation of damping performance. It offers the same exceptional trail-smoothing capabilities as their double-can TTX2Air m.2 but comes in a slimmer and lighter single-can size. The TTX1Air m.2 is a formidable and versatile choice for riders seeking a lighter or more compact shock without compromising capability and tuning options. With upgrades across key areas, it delivers more precise fine-tuning, unmatched comfort and sensitivity, and stands as the most well-balanced, predictable damper they've created to date. Riders now have a broader range of tuning options to perfectly match their bike and riding style-whether pushing limits between the tape or just riding for fun. A high-performing and robust air sprung shock that offers exceptional trail-smoothing capabilities With reduced friction and enhanced sensitivity and comfort, combined with ultimate traction and control, the shock now delivers an even more refined coil-like feel Elevated ride quality is made possible by new seals and the introduction of a bladder system, resulting in better rear-wheel control and improved ground contact Features an improved pedal platform that provides better support when pushing hard and efficiently through challenging climbs Redesigned spacer system makes it easier than ever to adjust the air volume in the positive chamber and stroke adjustment has also been simplified, and there is no longer any need to remove the end-eye for modification (Delivered with the longest stroke, plus the additional parts required to alter the stroke) Redesigned adjustment knob for quicker, more intuitive tuning, allowing riders to fine-tune their setup on the fly Compact end-eye design for better compatibility Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 190 Eyelet Diameter (mm) 12.7 Lockout Switch Shock Mounted Switch Positive Spring Air Stroke (mm) 45 Ohlins TTX1 Air m.2 Rear Shock Rear Shock

by Ohlins

—$825

The Ohlins TTX1 Air m.2 rear shock is designed for trail bikes and eMTBs with more linear suspension systems and builds on their race-proven foundation of damping performance. It offers the same exceptional trail-smoothing capabilities as their double-can TTX2Air m.2 but comes in a slimmer and lighter single-can size. The TTX1Air m.2 is a formidable and versatile choice for riders seeking a lighter or more compact shock without compromising capability and tuning options. With upgrades across key areas, it delivers more precise fine-tuning, unmatched comfort and sensitivity, and stands as the most well-balanced, predictable damper they've created to date. Riders now have a broader range of tuning options to perfectly match their bike and riding style-whether pushing limits between the tape or just riding for fun. A high-performing and robust air sprung shock that offers exceptional trail-smoothing capabilities With reduced friction and enhanced sensitivity and comfort, combined with ultimate traction and control, the shock now delivers an even more refined coil-like feel Elevated ride quality is made possible by new seals and the introduction of a bladder system, resulting in better rear-wheel control and improved ground contact Features an improved pedal platform that provides better support when pushing hard and efficiently through challenging climbs Redesigned spacer system makes it easier than ever to adjust the air volume in the positive chamber and stroke adjustment has also been simplified, and there is no longer any need to remove the end-eye for modification (Delivered with the longest stroke, plus the additional parts required to alter the stroke) Redesigned adjustment knob for quicker, more intuitive tuning, allowing riders to fine-tune their setup on the fly Compact end-eye design for better compatibility Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 165 Eyelet Diameter (mm) 12.7 Lockout Switch Shock Mounted Switch Positive Spring Air Stroke (mm) 45 Ohlins TTX1 Air m.2 Rear Shock Rear Shock

by Ohlins

—$819.50

The Ohlins TTX1 Air m.2 rear shock is designed for trail bikes and eMTBs with more linear suspension systems and builds on their race-proven foundation of damping performance. It offers the same exceptional trail-smoothing capabilities as their double-can TTX2Air m.2 but comes in a slimmer and lighter single-can size. The TTX1Air m.2 is a formidable and versatile choice for riders seeking a lighter or more compact shock without compromising capability and tuning options. With upgrades across key areas, it delivers more precise fine-tuning, unmatched comfort and sensitivity, and stands as the most well-balanced, predictable damper they've created to date. Riders now have a broader range of tuning options to perfectly match their bike and riding style-whether pushing limits between the tape or just riding for fun. A high-performing and robust air sprung shock that offers exceptional trail-smoothing capabilities With reduced friction and enhanced sensitivity and comfort, combined with ultimate traction and control, the shock now delivers an even more refined coil-like feel Elevated ride quality is made possible by new seals and the introduction of a bladder system, resulting in better rear-wheel control and improved ground contact Features an improved pedal platform that provides better support when pushing hard and efficiently through challenging climbs Redesigned spacer system makes it easier than ever to adjust the air volume in the positive chamber and stroke adjustment has also been simplified, and there is no longer any need to remove the end-eye for modification (Delivered with the longest stroke, plus the additional parts required to alter the stroke) Redesigned adjustment knob for quicker, more intuitive tuning, allowing riders to fine-tune their setup on the fly Compact end-eye design for better compatibility Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 210 Eyelet Diameter (mm) 12.7 Lockout Switch Shock Mounted Switch Positive Spring Air Stroke (mm) 55 Ohlins TTX1 Air m.2 Rear Shock Rear Shock UPC: 840153644429

by Ohlins

—$48.51

These Ohlins air spring volume spacer kits enable riders to precisely tailor the ride characteristics of the air spring on their Ohlins rear shock by clipping larger or smaller volume spacers onto the shaft within the end eye/air can cavity. This air spring volume kit enables riders to precisely tailor the ride characteristics of the air spring of the Ohlins TXC Air m.1 / m.2 rear shocks by clipping larger or smaller volume spacers onto the shaft within the end eye/air can cavity Includes (6) spacers in all: (4) 1000 mm "C"-shaped plastic spacers, (2) 750 mm "C"-shaped plastic spacers The 750 mm and 1000 mm spacers are bagged separately for easy identification Clips onto the damper shaft; no end-eye disassembly needed Ohlins Rear Shock Air Spring Volume Spacer Rear Shock Tune Kits UPC: 840153641206

by Ohlins

—$825

The Ohlins TTX2Air m.2 version rear shock builds on their race-proven, robust air-sprung shock and is best suited for bikes with more progressive linkage ratios. It has larger positive and negative air chamber volumes, a double-can, air spring design with additional control of the air volume spacing. This gives riders greater freedom to adjust the spring curve and easily dial-in the exact amount of progression they desire. With upgrades across key areas, TTX2Air m.2 delivers more precise fine-tuning, unmatched comfort and sensitivity, and stands as the most well-balanced, predictable damper they've created to date. Riders now have a broader range of tuning options to perfectly match their bike and riding style-whether pushing limits between the tape or just riding for fun. The highly adjustable TTX2 Air m.2 boasts Ohlins twin-tube damping technology in a double-can, higher volume, air spring shock designed for more progressive suspension systems With reduced friction and enhanced sensitivity and comfort, combined with ultimate traction and control, the shock now delivers an even more refined coil-like feel Elevated ride quality is made possible by new seals and the introduction of a bladder system, resulting in better rear-wheel control and improved ground contact The updated damper allows the rear wheel to track terrain more precisely through rough sections, ensuring superior traction and handling Features an improved pedal platform that provides better support when pushing hard and efficiently through challenging climbs Redesigned spacer system makes it easier than ever to adjust the air volume in the positive chamber and stroke adjustment has also been simplified, and there is no longer any need to remove the end-eye for modification (Delivered with the longest stroke, plus Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 185 Eyelet Diameter (mm) 12.7 Lockout Switch Shock Mounted Switch Positive Spring Air Stroke (mm) 55 Ohlins TTX2 Air m.2 Rear Shock Rear Shock UPC: 840153644443

by Ohlins

—$825

The Ohlins TTX2Air m.2 version rear shock builds on their race-proven, robust air-sprung shock and is best suited for bikes with more progressive linkage ratios. It has larger positive and negative air chamber volumes, a double-can, air spring design with additional control of the air volume spacing. This gives riders greater freedom to adjust the spring curve and easily dial-in the exact amount of progression they desire. With upgrades across key areas, TTX2Air m.2 delivers more precise fine-tuning, unmatched comfort and sensitivity, and stands as the most well-balanced, predictable damper they've created to date. Riders now have a broader range of tuning options to perfectly match their bike and riding style-whether pushing limits between the tape or just riding for fun. The highly adjustable TTX2 Air m.2 boasts Ohlins twin-tube damping technology in a double-can, higher volume, air spring shock designed for more progressive suspension systems With reduced friction and enhanced sensitivity and comfort, combined with ultimate traction and control, the shock now delivers an even more refined coil-like feel Elevated ride quality is made possible by new seals and the introduction of a bladder system, resulting in better rear-wheel control and improved ground contact The updated damper allows the rear wheel to track terrain more precisely through rough sections, ensuring superior traction and handling Features an improved pedal platform that provides better support when pushing hard and efficiently through challenging climbs Redesigned spacer system makes it easier than ever to adjust the air volume in the positive chamber and stroke adjustment has also been simplified, and there is no longer any need to remove the end-eye for modification (Delivered with the longest stroke, plus Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 230 Eyelet Diameter (mm) 12.7 Lockout Switch Shock Mounted Switch Positive Spring Air Stroke (mm) 65 Ohlins TTX2 Air m.2 Rear Shock Rear Shock UPC: 840153644474

by Ohlins

—$825

The Ohlins TTX2Air m.2 version rear shock builds on their race-proven, robust air-sprung shock and is best suited for bikes with more progressive linkage ratios. It has larger positive and negative air chamber volumes, a double-can, air spring design with additional control of the air volume spacing. This gives riders greater freedom to adjust the spring curve and easily dial-in the exact amount of progression they desire. With upgrades across key areas, TTX2Air m.2 delivers more precise fine-tuning, unmatched comfort and sensitivity, and stands as the most well-balanced, predictable damper they've created to date. Riders now have a broader range of tuning options to perfectly match their bike and riding style-whether pushing limits between the tape or just riding for fun. The highly adjustable TTX2 Air m.2 boasts Ohlins twin-tube damping technology in a double-can, higher volume, air spring shock designed for more progressive suspension systems With reduced friction and enhanced sensitivity and comfort, combined with ultimate traction and control, the shock now delivers an even more refined coil-like feel Elevated ride quality is made possible by new seals and the introduction of a bladder system, resulting in better rear-wheel control and improved ground contact The updated damper allows the rear wheel to track terrain more precisely through rough sections, ensuring superior traction and handling Features an improved pedal platform that provides better support when pushing hard and efficiently through challenging climbs Redesigned spacer system makes it easier than ever to adjust the air volume in the positive chamber and stroke adjustment has also been simplified, and there is no longer any need to remove the end-eye for modification (Delivered with the longest stroke, plus Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 210 Eyelet Diameter (mm) 12.7 Lockout Switch Shock Mounted Switch Positive Spring Air Stroke (mm) 55 Ohlins TTX2 Air m.2 Rear Shock Rear Shock UPC: 840153644467

by Ohlins

—$40

These service kits for Ohlins fork damper cartridges include common wear items to perform a 100-hour damper service. This is the standard service kit (also known as the "100-hour" kit) for the OTX14 fork damper cartridge used on all XC forks (RXC34 m.1, carbon and alloy crown) forks Use this kit for a routine service Simplified service kit includes all the common wearing dynamic seals (X-ring, backup rings, etc.) Ohlins 100 Hour Damper Service Kit Service Kit UPC: 840153641626

by Ohlins

—$100

The Ohlins 200 hour rebuild kit for their suspension fork air spring cartridges includes all major wear items for a more thorough rebuild. This is the more thorough rebuild kit (also known as the "200-hour" kit) for the 2-chamber "more traditional" air spring found only on the RXF34 m.2 Use this kit if the fork has skipped a few services, has been abused, or exhibits any signs of leakage Includes less common items, such as the seal head circlip, bump rubber, top-out rubber, and Schrader valves Ohlins 200 Hour Air Spring Rebuild Kit Service Kit UPC: 840153623738

by Ohlins

—$47

These service kits for Ohlins fork damper cartridges include common wear items to perform a 100-hour damper service.Simplified 100-hour damper service kit covers all common wear items for the TTX18 fork damper cartridge (TTX18 cartridge is found in the RXF36 m.2/m.3, RXF38 m.2/m.3, and the DH38 m.1/m.2 Ohlins 100 Hour Damper Service Kit Service Kit UPC: 840153641473

by Ohlins

—$20

Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 8 mm x 44.85 mm (8 mm diameter bolt hole and 44.85 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 8 Frame Mount Width 44.85 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153639821

by Ohlins

—$20

Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 6 mm x 20 mm (6 mm diameter bolt hole and 20 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 6 Frame Mount Width 20 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153639845

by Ohlins

—$20.49

Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 6 mm x 22 mm (6 mm diameter bolt hole and 22 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 6 Frame Mount Width 22 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153641923

by Ohlins

—$20.49

Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 8 mm x 26 mm (8 mm diameter bolt hole and 26 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 8 Frame Mount Width 26 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153641909

by Ohlins

—$20

Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 8 mm x 21.8 mm (8 mm diameter bolt hole and 21.8 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 8 Frame Mount Width 21.8 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153639814

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 70 lbs/in spring rate intended for riders weighing 260+ lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (70 lbs/in has yellow/black/yellow bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 5.2 mm wire diameter Ohlins DH38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642173

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. Ohlins offers a wide range of 7 fork spring rates for the RXF38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins RXF38 fork 70 lbs/in spring rate intended for riders weighing 260+ lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (70 lbs/in has yellow/black/yellow bands) 191 mm of actual stroke 335 mm (+/- 3mm) free length 18.5 mm I.D. / 5.0 mm wire diameter Ohlins RXF38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642104

by Ohlins