Fork Parts / Service

—$470

FOX 38 Crown/Steerer/Uppertube Assembies for service and repair.MPN: 820-12-957-KIT

by FOX

—$49

Lower Leg Bushings for Fox suspension fork service and repair.MPN: 803-04-054

by FOX

—$380

Damper Assembly for Marzocchi Bomber 38 suspension forks.MPN: 820-18-684-KIT

by FOX

—$699

The Flight Attendant Charger 3.2 Damper Upgrade kit converts specific non-Flight Attendant suspension forks into a Flight Attendant-capable unit. Includes necessary parts to convert RockShox ZEB B1 Suspension Fork (2027+) into a Flight Attendant-capable unit IMPORTANT - Requires power meter or pedal sensor for Flight Attendant functionality (Sold separately) Kit Includes: Damper, Module, Battery, USB-C Charger W/O Cord Compatible with RockShox Suspension Fork Models: FS-ZEB-SEL-B1, FS-ZEB-UFA-B1, FS-ZEB-ULT-B1 MPN: 00.4318.118.001

by RockShox

—$699

The Flight Attendant Charger 3.2 Damper Upgrade kit converts specific non-Flight Attendant suspension forks into a Flight Attendant-capable unit. Includes necessary parts to convert RockShox Pike C1+ Suspension Fork (2023+) into a Flight Attendant-capable unit IMPORTANT - Requires power meter or pedal sensor for Flight Attendant functionality (Sold separately) Kit Includes: Damper, Module, Battery, USB-C Charger W/O Cord Compatible with RockShox Suspension Fork Models: FS-PIKE-SEL-C1, FS-PIKE-UFA-C2, FS-PIKE-UFA-C3, FS-PIKE-ULT-C1, FS-PIKE-ULT-C2 MPN: 00.4318.119.000

by RockShox

—$699

The Flight Attendant Charger 3.2 Damper Upgrade kit converts specific non-Flight Attendant suspension forks into a Flight Attendant-capable unit. Includes necessary parts to convert RockShox Lyrik E1 Suspension Fork (2027+) into a Flight Attendant-capable unit IMPORTANT - Requires power meter or pedal sensor for Flight Attendant functionality (Sold separately) Kit Includes: Damper, Module, Battery, USB-C Charger W/O Cord Compatible with RockShox Suspension Fork Models: FS-LYRK-SEL-E1, FS-LYRK-UFA-E1, FS-LYRK-ULT-E1 MPN: 00.4318.118.000

by RockShox

—$497

Damper Assembles for FOX 40 suspension forks.MPN: 820-18-655-KIT

by FOX

—$519

Damper Assembly for FOX Podium Inverted suspension forks.MPN: 820-18-657-KIT

by FOX

—$193

FOX damper shaft assembly for repairs and maintenance of GRIP X2 fork dampersMPN: 820-03-831-KIT

by FOX

—$441

Grip X2 damper assembly for FOX 38 suspension forks.MPN: 820-18-663-KIT

by FOX

—$44

Air spring seal kits for Fox suspension repair and rebuild.MPN: 803-04-703

by FOX

—$209

40 Air Shaft AssemblyMPN: 820-02-754-KIT

by FOX

—$62

Neg Plate subassembly or service on FOX suspension forks.MPN: 820-02-752-KIT

by FOX

—$209

40 Air Shaft AssemblyMPN: 820-02-753-KIT

by FOX

—$44

Air spring seal kits for Fox suspension repair and rebuild.MPN: 803-04-704

by FOX

—$353

FOX 34 SL suspension fork complete damper assemblies for service and repair.MPN: 820-18-648-KIT

by FOX

—$144

38 Air Shaft Assembly for Fox suspension forks.MPN: 820-02-751-KIT

by FOX

—$144

38 Air Shaft Assembly for Fox suspension forks.MPN: 820-02-750-KIT

by FOX

—$8.99

Volume Spacer tuning kits for FOX suspension fork service and repairs.MPN: 234-44-450

by FOX

—$399

The RockShox 3.2 RC2 damper upgrade kit offers intuitive HSC/LSC controls and features ButterCups technology to make setup fast, understandable, and easy to communicate. Compatible with RockShox ZEB fork models: FS-ZEB-SEL-B1, FS-ZEB-UFA-B1, FS-ZEB-ULT-B1 New Rebound/Compression tunes that match Linear XL air spring, achieves virtually silent performance, keeping riders focused on the trail ButterCups technology blocks 20% of high-frequency trail chatter to reduce hand and arm fatigue Delivers speed-sensitive control with fully independent High Speed and Low Speed Compression damping Includes complete right side internals MPN: 00.4318.112.001

by RockShox

—$399

The RockShox 3.2 RC2 damper upgrade kit offers intuitive HSC/LSC controls and features ButterCups technology to make setup fast, understandable, and easy to communicate. Compatible with RockShox Lyrik fork models: FS-LYRK-SEL-E1, FS-LYRK-UFA-E1, FS-LYRK-ULT-E1 New Rebound/Compression tunes that match Linear XL air spring, achieves virtually silent performance, keeping riders focused on the trail ButterCups technology blocks 20% of high-frequency trail chatter to reduce hand and arm fatigue Delivers speed-sensitive control with fully independent High Speed and Low Speed Compression damping Includes complete right side internals MPN: 00.4318.112.000

by RockShox

—$399

The RockShox 3.2 RC2 damper upgrade kit offers intuitive HSC/LSC controls and features ButterCups technology to make setup fast, understandable, and easy to communicate. Compatible with RockShox BoXXer fork models: FS-BXR-SEL-D2, FS-BXR-ULT-D1, FS-BXR-ULT-D2 New Rebound/Compression tunes that match Linear XL air spring, achieves virtually silent performance, keeping riders focused on the trail ButterCups technology blocks 20% of high-frequency trail chatter to reduce hand and arm fatigue Delivers speed-sensitive control with fully independent High Speed and Low Speed Compression damping Includes complete right side internals MPN: 00.4318.112.002

by RockShox

—$188

FOX carbon fiber lower leg guard assembly replaces the oriiginal stanchion guards of the Podium Inverted suspension fork. These guards provide valuable protection for the premium Kashima coated stanchions to keep your Podium Inverted fork performing at highest level and looking good while doing it. Replacement guards for FOX Podium Inverted fork Carbon Fiber guards are both extremely durable and lightweight Includes mounting hardware MPN: 820-09-161-KIT

by FOX

—$295

The RockShox 2-position Charger Race Day 2 damper-every detail perfected, every extra ounce shaved away; this is their lightest performance-driven damper ever. Light. Speed. Performance. Podium. This 2P damper features two compression positions: Open or a rock-solid Lock. Includes complete right side damper internals for an easy upgrade 30mm (60mm Max Travel) Compatible with RockShox RUDY XL model: FS-RDYX-ULT-A1 suspension fork Includes complete right side damper internals for an easy upgrade Compatible with previous Rudy models 30mm (40mm Max Travel) MPN: 00.4318.086.005

by RockShox

—$69.95

The MRP Noken is a spring upgrade that increases air-spring volume, reducing the compression ratio and creating a more linear spring curve that mimics the plush feel of a coil spring. This simple upgrade addresses a key challenge for many riders with long-travel forks: finding the right balance between a supple initial stroke, strong mid-stroke support, and fully utilizing all the fork's travel. With the Noken, you can optimize that perfect trifecta. Increases the positive spring volume by 1.5 volume spacers on Fox 36 models Compatible with FOX 2018-2025 FOX 36 Factory, Performance Elite, Performance, and Rhythm models, including E-tuned versions. As well as 2019+ Marzocchi Z1 models, Performance Elite, and Performance models, including E-tuned versions Also compatible with Marzocchi Z1 (2019+) models Preserves small-bump compliance and mid-stroke support, while also regaining the travel that is typically lost due to the harsh, steep progression of some stock air springs Creates a more linear spring curve with a less dramatic spring rate change near bottom-out The Noken is 10-13mm taller than standard damper control knobs, so it s important to confirm downtube clearance before installation Installs with a 32mm six-sided socket MPN: WB-24-2223

by MRP

—$40

These service kits for Ohlins fork damper cartridges include common wear items to perform a 100-hour damper service. This is the standard service kit (also known as the "100-hour" kit) for the OTX14 fork damper cartridge used on all XC forks (RXC34 m.1, carbon and alloy crown) forks Use this kit for a routine service Simplified service kit includes all the common wearing dynamic seals (X-ring, backup rings, etc.) MPN: 19968-01

by Ohlins

—$90

Isolator's shim-based, spring-backed Internal Floating Piston (IFP) is designed to give riders a consistent and predictable feel throughout travel. Isolator offers a three-position Compression damping adjustment: a plush Open to absorb big impacts, a supportive Pedal without harshness on successive hits, and a watt-saving Firm for the maximum damping force to calm bobbing for the most efficient ride. Includes full right-side internals and controls Compatible Reba RL B1 (2026+) 3-Position crown type For use with RockShox model: FS-REBA-GLD-B1 MPN: 00.4318.063.014

by RockShox

—$65

RockShox Motion Control For Remote Compression Dampers For use with 10mm cable pull remote (remote sold separately) Compatible with RockShox model: FS-REBA-GLD-B1 MPN: 11.4018.104.043

by RockShox

—$55

RockShox Motion Control Compression DampersCompatible with RockShox model: FS-REBA-GLD-B1MPN: 11.4018.104.042

by RockShox

—$55

200 Hour Service Kit for the repair and maintenance of RockShox forks. Performing yearly maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. RockShox recommended 200hr/1 Year service kit for Reba RL/Gold (2026+) generation-B suspension forks Compatible with RockShox model: FS-REBA-GLD-B1 MPN: 00.4318.025.224

by RockShox

—$70

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 70 lbs/in spring rate intended for riders weighing 260+ lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (70 lbs/in has yellow/black/yellow bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 5.2 mm wire diameter MPN: 19287-07

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. Ohlins offers a wide range of 7 fork spring rates for the RXF38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins RXF38 fork 65 lbs/in spring rate intended for riders weighing between 240 lbs to 260 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (65 lbs/in has red/black/red bands) 191 mm of actual stroke 335 mm (+/- 3mm) free length 18.5 mm I.D. / 4.9 mm wire diameter MPN: 19286-06

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. Ohlins offers a wide range of 7 fork spring rates for the RXF38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins RXF38 fork 70 lbs/in spring rate intended for riders weighing 260+ lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (70 lbs/in has yellow/black/yellow bands) 191 mm of actual stroke 335 mm (+/- 3mm) free length 18.5 mm I.D. / 5.0 mm wire diameter MPN: 19286-07

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 45 lbs/in spring rate intended for riders weighing between 160 lbs to 180 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (45 lbs/in has green bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 4.5 mm wire diameter MPN: 19287-02

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 40 lbs/in spring rate intended for riders weighing between 140 lbs to 160 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (40 lbs/in has yellow bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 4.3 mm wire diameter MPN: 19287-01

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 65 lbs/in spring rate intended for riders weighing between 240 lbs to 260 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (65 lbs/in has red/black/red bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 5.1 mm wire diameter MPN: 19287-06

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 55 lbs/in spring rate intended for riders weighing between 200 lbs to 220 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (55 lbs/in has white bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 4.8 mm wire diameter MPN: 19287-04

by Ohlins

—$55

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 100 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm 100 mm tube intended to convert RXF36 forks for dirt jumping Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) MPN: 18976-08

by Ohlins

—$330

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 180mm air spring cartridge for the DH38 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup MPN: 19240-09

by Ohlins

—$300

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 180mm air spring cartridge for the RXF38 m.2 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup MPN: 19240-18

by Ohlins

—$330

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 200mm air spring cartridge for the DH38 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup MPN: 19240-08

by Ohlins

—$245

This air spring shaft kits are used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins. This 120mm air spring shaft kit is used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins The original fork's top cap is reused; only the shaft assembly is replaced The kit includes the lower shaft assembly, all dynamic air piston seals, new circlips, and a new footnut The air shaft has 4 negative volume spacers installed from the factory, which are adjustable to customize the level of support and suppleness in addition to the adjustable volume in the main spring Interchangeable with RXF34 chassis MPN: 19965-03

by Ohlins

—$245

This air spring shaft kits are used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins. This air spring shaft ONLY works with the 100mm carbon-crown RXC34 m.1 fork, part number FGMTB 3410 239x This 100mm air spring shaft kit is used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins The original fork's top cap is reused; only the shaft assembly is replaced The kit includes the lower shaft assembly, all dynamic air piston seals, new circlips, and a new footnut The air shaft has 4 negative volume spacers installed from the factory, which are adjustable to customize the level of support and suppleness in addition to the adjustable volume in the main spring MPN: 19965-01

by Ohlins

—$245

This air spring shaft kits are used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins. This 110mm air spring shaft kit is used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins The original fork's top cap is reused; only the shaft assembly is replaced The kit includes the lower shaft assembly, all dynamic air piston seals, new circlips, and a new footnut The air shaft has 4 negative volume spacers installed from the factory, which are adjustable to customize the level of support and suppleness in addition to the adjustable volume in the main spring Interchangeable with RXF34 chassis MPN: 19965-02

by Ohlins

—$17.99

This kit includes four small, pellet-shaped volume spacers, used to adjust the negative air volume found in the air spring shaft in the Ohlins RXF34 m.1 fork. Remove the negative volumes spacers for a more supple off-the-top feeling. Add spacers to gain more initial support and tire feel. Allows riders to customize the feel of their Ohlins RXC34 m.1 air spring Includes (4) spacers Remove spacers for an easier breakaway force or add spacers to gain more support and tire feel Only works on the XC-specific air spring in the Ohlins RXC34 m.1 fork MPN: 19977-01

by Ohlins

—$300

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 160mm air spring cartridge for the RXF38 m.2 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup MPN: 19240-16

by Ohlins

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Model D (long body) is compatible with RockShox models: Pike 2015-2022 with "Boost" 15x110 axle spacing, Pike 2017+ (regardless of axle spacing), Revelation 2017-2022 (35mm) Recommended for 120 and 130mm 29 /27.5+ and 120mm 27.5 and 26 forks New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MPN: WB-25-2174

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX models: 34 Float 2016-2021forks (Recommended for 140-160mm 29 , 27.5+, and 27.5 forks), 34 Float 2022+ (130-140mm 29 forks, FOX 34 Step Cast 2019+ (Recommended for 110-120mm 29 forks) Also compatible with Marzocchi 2020 Z2 (Recommended for 140-160mm 29 , 27.5+, and 27.5 forks) Cartridges NOT compatible with TALAS forks New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MPN: WB-25-2172

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX 32 Float 2016+ with the FIT 4 and Grip dampers (Recommended for 100-130mm 26 , 27.5 and 29" forks) Not recommended for 80-90mm forks NOT compatible with 140-150mm forks or FOX 32 Step Cast forks New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MPN: WB-25-2177

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with RockShock ZEB 2020+ (All travels and both wheel-size options) New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MPN: WB-25-2183

by MRP