Components

—$50

RockShox Service Kits Item Specifications Fits 32mm SID RockShox Service Kits Service Kit UPC: 710845608346

by RockShox

—$155

Make a good fork a great fork. Introducing the Luftkappe air piston kit for Fox Float forks. The Luftkappe is available for: 34 Float NA2 (2016-17) Performance & Factory Series (130mm + only - 120mm and lower need the 2018 Evol air shaft before a Luftkappe can be fitted) 34 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA (2015-17) Performance & Factory Series (max 180mm travel, min 120mm travel) Pinkbike: "The Luftkappe's change to the feel of the Lyrik was immediately noticeable on the trail. Traction was increased across chatter and the fork remained higher in its travel and more stable, improving the dynamic ride height without sacrificing the top end. My confidence soared when hitting sections with a lot of chatter and mid to large-sized hits, and the result meant more comfort and speed through such sections." Taking everything we learned with the Corset air sleeves and the Luftkappe we developed for the Pike, Yari & Lyrik, this second generation Luftkappe is a new air piston assembly for Fox's 34 NA2/Evol and 36 Evol forks. User installable and simple to set up, the Luftkappe transforms a good fork into a great fork. Softer initial stroke Larger negative air chamber Increased sag without the associated diving Coil-like initial & mid-stroke spring rate without excessive bottoming Increased sensitivity Improved mid stroke support & control Superior bump compliance and traction Reduced hand fatigue Reduces required compression damping Retains volume spacer compatibility Optional tools available for self-install What's included in the kit: 34 Evol: Upgrade low friction air piston assembly. 34 NA2: Upgrade low friction air piston assembly & upgrade low friction, low profile sealhead 36 Evol: Upgrade low friction air piston assembly. 36 NA: Upgrade low friction air piston assembly & upgrade topout spacer ring Note: If your 36 Evol tops out noticeably, you will need to replace your air shaft assembly before purchasing the Luftkappe. Fox have updated this part due to the topout issues that many of the 2018 36 Evol forks had. 34 forks do not have this issue. Relevant Fox part numbers for the new air shaft assemblies, by travel: 180mm: 820-02-534-KIT 170mm: 820-02-535-KIT 160mm: 820-02-536-KIT 150mm: 820-02-537-KIT 140mm: 820-02-538-KIT 100mm (36 831): 820-02-539-KIT If your fork does not have noticeable top-out issues, you don't need to replace the shaft before installing the Luftkappe. FAQ: 1. Can I install it myself? Yes, provided you have access to the supplies and tools listed in the installation instructions above. If you're really crafty (and EXTREMELY careful) it is possible to install the Luftkappes (all Evol variants) without the installation tools, however the risk of damaging things is much higher and we really don't recommend trying. If you choose to take this route and damage your air shaft (or anything else), we cannot be held responsible - we make the tools available for a reason. It is not possible to install the 34 NA2 Luftkappe kit without 10mm shaft clamps and the bullet tool - you'll damage the shaft AND damage the seals on the new sealhead. 2. Does it work with TALAS forks? No, sorry. 3. Does it work with versions of the 36 prior to 2015? No, sorry! 4. Does it work with 32s or 40s? No, sorry. 5. How does it actually work? It enlarges the negative air chamber to reduce the initial spring rate. This lets you run higher air pressure for more support in the middle and end of the stroke with improved sensitivity in the start of the stroke. 6. Is it compatible with MRP's Ramp Control cartridge? Generally speaking no. If you are running your fork at least 30mm shorter than its maximum available travel, then yes. 7. Shouldn't I just buy a new fork instead? Sure, they're about the same price as the Luftkappe. 8. What parts does it actually replace in the air spring? It replaces the plastic piston itself, and the rubber topout bumper in the 34s is removed but not replaced (36 topout assembly is unchanged). You reuse your air shaft, though the 34NA2 kit comes with a replacement low friction, low profile sealhead comparable in size to the stock 2018 Evol sealhead. This is also why the NA2 kit is more expensive than the other two - it's basically a 2018 Factory update on top of a Luftkappe. 9. Who is this NOT suited for? The Luftkappe is outright superior to the stock air spring for nearly everyone, however there are a few cases where it might not be for you: - If you run your 36 at 180mm, it will be quite progressive. You may like it, but you may also find it hard to use the last 5-10mm of travel - if this would bother you then have a think about it first. At 170mm and below it will be fine. - If you like running really low sag for some reason. The Luftkappe runs more sag than the stock fork, but is firmer in the mid stroke - similar to a coil fork, but with ending-stroke ramp up to prevent harsh bottoming. If you're the kind of person who wants the fork to run 5% sag, this isn't for you. We could point out that a setup like that probably just means your handlebars are set too low and you're compensating with oversprung suspension, but we aren't here to judge you, so maybe just don't buy it. - If you're anal about your fork having an exact (but rounded-to-the-nearest-10mm) amount of travel. Because the Luftkappe balances forces at a pneumatic topout, the force right around topout is very low (literally zero other than friction), meaning the weight of the bike alone will cause it to sag a few millimetres. Your car's suspension sags under the vehicle's own weight, so should your bike - unless it was so sticky, overly stiff or over-preloaded that 10kg of bike weight wasn't enough to cause your suspension to move at all, of course. If only having an apparent 148mm out of a 150mm fork is a big deal for you, stick with the stock fork. (in)Compatibility Information: Luftkappe IS available for: 34 Float NA2 (Performance, Performance Elite and Factory Series, 2016-17), 130mm and higher travel 34 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA1 (NA) Not compatible with: Rhythm-series forks E-bike specific forks Non-Evol (pre-2018) 36 forks 34mm forks for 29" wheels with 150mm or more travel Pre-2016 34 forks Pre-2016 34 forks that were later updated with the factory NA air system update Any TALAS forks Any 32mm forks Any 40mm forks Vorsprung Luftkappe Air Springs & Parts

by Vorsprung

—$39.95

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it.Made in Minnesota to aerospace standards Item Specifications Axle Diameter (mm) 12 Color Black Overall Length (mm) 159 Thread Length (mm) 12 Thread Pitch 1.0 Weight 42 Wolf Tooth Rear Thru Axle Thru Axle UPC: 810006801620

by Wolf Tooth

—$25.95

The precision-engineered Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. M6 stainless steel bolt with integrated washer Tool interface - 4mm hex key Item Specifications Color Raw Silver Defined Color Silver Diameter 36.4 Material Aluminum Type Bolt-On Wolf Tooth Seatpost Clamp Seatpost Clamp UPC: 810006809701

by Wolf Tooth

—$187.99

EC70 Carbon Seatpost Item Specifications Clamp Style Standard Rails Color Black Defined Color Black Diameter 27.2 Length 350 Material Carbon Offset (mm) 0 Easton EC70 Carbon Seatpost UPC: 821973339177

by Easton

—$22.95

Ritchey seatpost clamp kits allow safe and secure clamping of oval shaped saddle rails, such as carbon rails from Fizik (7x9.6mm) and Selle Italia (8x8.5mm)For installing large railed saddles on Ritchey one-bolt posts Ritchey WCS 1-Bolt Seatpost Saddle Rail Clamps Seatpost Part UPC: 796941412438

by Ritchey

—$69

Dropper post levers are something a lot of us overlook, we want our dropper to work but don't think about the button that makes the magic happen. After testing a bunch of levers, from the plastic ones to the ergonomically weird, even the best in class, PNW decided they could do EVEN better. So they made the Loam Lever V2. It's the most adjustable lever around, ensuring you can modify it to fit your exact ergonomic specifications. The levers grippy injection molded pad has got your back in sloppy weather conditions. And speaking of weather, we made sure the whole thing was as weather proof as possible, meaning your lever won't squeak, bind up or fail after being in the rain. The changes in Loam Lever Gen 2 stemmed directly from customer feedback for those looking for a wider range of adjustment and a larger contact patch on the thumb pad. PNW focused on these two areas while keeping all of the great features that have made their Loam Lever one of the best dropper post levers available - high-end construction, smooth lever action and feel, and ride-or-die reliability in all weather conditions. **Product image is shown without mount and may not match title. Please confirm your fitment matches the title before purchase** THE LOAM LEVER HAS 5 KEY CHARACTERISTICS: Adjustability - We believe precision matters, this lever provides two forms of adjustment so you can dial in your perfect placement. Weather Proof - Oversized high quality sealed bearing paired with an additional seal and all stainless hardware for longevity and durability. No Slip Grip - Speaking of weather, the Loam Lever features a grippy injection molded thumb pad to keep your paws in place in even the sloppiest of conditions. Techy AF - Custom CNC machining throughout the whole design of the Loam Lever for precision and weight reduction. Direct Mount - Available in SRAM's MatchMaker X, Shimano's I-Spec II and I-Spec EV ***Inner cable no longer included in the packaging. Package includes the lever, selected clamp and mounting hardware*** TECH SPECS: Clamp Styles: Standard 22.2mm Hinge Clamp 31.8mm Hinge Clamp for road bars SRAM MatchMaker X (Code, Guide, excluding Level T versions) Shimano I-Spec II (XTR M9000, XT M8000, SLX M7000, DEORE M6000) Shimano I-Spec EV (Shimano I-SPEC EV XTR M9100/M9120, XT M8100/M8120, SLX M7100/M7120, Deore M6100/M6120) Weight: 36g w/o clamp Works with just about all dropper posts with cable routing from either direction 1x Shifter Style We don't believe in waste: 100% recyclable packaging PNW Loam V2 Dropper Remote Dropper Seatpost Remote UPC: 810035872356

by PNW

—$14.90

Saddle clamp heads and lowers for KS Dropper posts. KS Saddle Clamp Parts Dropper Seatpost Part EAN: 4718287313091

by KS

—$224.10

Featuring a new keyway system to prevent free-play in the post, the LEV Si represents the latest incarnation of affordable premium dropper performance. With its all alloy construction, micro-adjust head clamp and a variety of travel sizes, the LEV Si is ready for your next ride. Remote sold separately Adjustable air spring cartridge Aluminum Post, Mast, and Saddle Clamp Microadjust aluminum head clamp LEV Si Dropper seatposts are adjustable up to 250lbs of pressure Item Specifications Actuation Cable Remote Cable Routing Internal Clamp Style Std Rails Color Black Defined Color Black Diameter 27.2 Length 465 Offset (mm) 0 Remote Position Left Remote Position Right Travel (mm) 120 Weight 538 KS LEV Si Dropper Seatpost Dropper Seatpost EAN: 4718022315434

by KS

—$431.10

LEV-Ci has defined what a lightweight dropper should be. Ultralight and strong, LEV-Ci is the result of using premium materials and proven technology. Remote sold separately 7000-series alloy stanchion with reinforced carbon fiber mast Adjustable air sprung hydraulic cartridge Patented one-way roller clutch bearing Designed for internal frame routing Short insertion length to travel ratio Compatible with all KS Southpaw, KG and Westy remotes Item Specifications Actuation Cable Remote Cable Routing Internal Clamp Style Std Rails Color Black Defined Color Black Diameter 27.2 Length 460 Offset (mm) 0 Remote Position Left Remote Position Right Travel (mm) 120 Weight 477 KS LEV CI Dropper Seatpost Dropper Seatpost EAN: 4718022314031

by KS

—$242.10

Using the proven Lev design, the Integra takes advantage of internal routing to provide a clean aesthetic on modern mountain bikes. Next level of integration is possible when you replace the inner clamp of ODI lock-on grips with the KG Alloy remote. Remote sold separately The LEV Integra's internally routed cable significantly cleans up the look of your bike Black anodized mast and head with hard anodized stanchion Adjustable air sprung hydraulic cartridge Item Specifications Actuation Cable Remote Cable Routing Internal Clamp Style Std Rails Color Black Defined Color Black Diameter 31.6 Length 430 Offset (mm) 0 Remote Position Left Remote Position Right Travel (mm) 150 Weight 530 KS LEV Integra Dropper Seatpost Dropper Seatpost EAN: 4718022313959

by KS

—$69.99

The Spank Spoon bars are a value oriented way to personalize your trail, all-mountain, enduro, park or downhill bike. Micro grain refinement during the extrusion process for additional strength and toughness from the metal Extreme Gradual taper technology (XGT) spreads the load out over a greater area of the bar to minimize breaks and bends Item Specifications Back Sweep (deg) 8.5 Bar Clamp Diameter (mm) 31.8 Color Black/Green Defined Color Black Material Aluminum Rise 20 Upsweep 5 Weight 357 Width 800 Spank Spoon Handlebar Flat/Riser Handlebar EAN: 4710155965869

by Spank

—$89.99

Cane Creek 110 ZS Headset Lowers 110 version of former Cane Creek XXcII ZS bottoms Zero Stack (ZS) assemblies feature press-in cups with bearings inside the frame Item Specifications Color Black Weight 61.3g Material AL-7075 Crown Race 30.0 Stack Height 4mm Bearing Type Stainless Steel S.H.I.S Lower ZS56 Cane Creek 110-Series ZS - Zero Stack Headset Headset Lower UPC: 840226096100

by Cane Creek

—$210

InSet 2 combines legendary performance in a precision low stack tapered 44mm/56mm headset. The InSet 2 is equipped with in-house built bearings and is designed to give riders the option of a low stack height and effortless hassle-free performance. InSet 2 has 44mm upper internal cup, 56mm lower internal cup, 1.5" baseplate Engineered, manufactured and assembled in Portland, Oregon USA Designed specifically for a 44mm/56mm tapered headtube and a 1-1/8 to 1.5 tapered steerer tube Item Specifications Bearing Type Cartridge Color Matte Black Crown Race 40 Defined Color Black Lower Stack Height 8 S.H.I.S Lower ZS56 S.H.I.S Upper ZS44 S.H.I.S. Stem Clamp Diameter 28.6 Threadless Upper Stack Height 4 Weight 150 Chris King InSet 2 Headset Headsets UPC: 841529082555

by Chris King

—$10.58

Continental Standard Schrader valve tubes.Seamless and mold cured construction Item Specifications Weight 180g Valve Long Schrader ISO Diameter 622 / road / 29" ISO Width 28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47mm Labeled Size 700 x 28-47mm Valve Length Schrader Tube Compound Butyl Valve Core Removable Valve Shaft Smooth Continental Standard Tube Tubes EAN: 4019238556650

by Continental

—$64.90

The accessible E 593 rim is tough enough for all those moments that don't go to plan, but also for your normal Enduro riding adventures. Available in multiple options to build your own hard-hitting Enduro-ready wheelset with this 30 mm internal width, pinned alloy rim. Intended use = Enduro/All-Mountain/Trail Tubeless ready, 30mm wide alloy rim with pinned joint, Disc Brake Only Item Specifications Brake Compatibility Disc Only Brake Track None Color Black Defined Color Black Hub Drilling 28 ISO Diameter 622 / Road / 29" Rim Center Offset (mm) 0 Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Valve Presta Weight 665 Wheel Size 29" DT Swiss E 593 Rim Rims EAN: 7613052550794

by DT Swiss

—$319.90

When motor assistance and leg power meet, the range of terrain a bike can conquer grows almost exponentially. The H 1900 SPLINE is designed for this, now upgraded with the famous DT Swiss Ratchet technology. The Ratchet LN system distributes the combined forces from the rider and the motor over a larger area than the previous pawl freehub systems, increasing the systems' durability thanks to lower load peaks. The 370 hub enables full power transmission to the ground with reinforced hybrid spokes laced to a resistant aluminum rim, available in two inner widths. Aluminum rim, Hooked / Crotchet tubeless ready DT Hybrid 1 spokes are reinforced and increase the lateral and torsional stiffness of the wheel 370 Hub Includes Tubeless Valve and Tape Item Specifications Color Black Defined Color Black Designed for ebike Yes Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" keyword search electric bikes, electric bicycle, e-bike, e-bikes keyword search hybrid Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 29" DT Swiss H 1900 Spline 30 Front Wheel Front Wheel EAN: 7613052349558

by DT Swiss

—$99.99

Duroc Rim Welded seam Double wall construction STR tubeless ready Item Specifications Brake Compatibility Disc Only Brake Track None Color Black Defined Color Black Hub Drilling 32 ISO Diameter 584 / 650b / 27.5" Manufacturer Spec ERD (mm) 570 Rim Center Offset (mm) 0 Rim Material Alloy Rim Width (Internal) 36 Tire Type Tubeless Ready Valve Presta Weight 515 Wheel Size 27.5" Sun Ringle Duroc Rims UPC: 844171054925

by Sun Ringle

—$485

Onyx Vesper hubs transfer the precise amount of torque you want to the ground when you need it. Nasty climbs on boulders and rock require just the right amount of instantaneous power but only at your command. There is no substitute for absolute control of your machine. Uphill or downhill, Onyx ceramic hybrid bearings get you rolling faster and with less effort. Vesper hubs are the lightest MTB hubs from Onyx, intended for cross-country and trail use Onyx s patented sprag clutch design removes the ratcheting noise of traditional hubs Item Specifications Bearing Type Sealed Cartridge Cassette Body Type Shimano HG Center to Flange, Left 35.65 Center to Flange, Right 22.47 Color Black Defined Color Black Flange Diameter, Left 60 Flange Diameter, Right 60 Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 148mm Spoke Interface J-Bend Weight 420 ONYX Racing Products Vesper Rear Hub Rear Hub

by ONYX Racing Products

—$215

With 105-level disc hubs and tubeless-compatible DT rims, you're set up for Adventure, Gravel, Pavement, and light-duty offroad. Professional tubeless tape installation included 32 spokes 22mm inner width Uses 25mm tubeless tape Item Specifications Cassette Body Type Shimano HG 11/12-Speed Road Defined Color Black Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 142mm Rim Width (Internal) 22 Tire Type Tubeless Ready Clincher Wheel Size 700c Quality Wheels 105 / DT R500 Disc Rear Wheel Rear Wheel UPC: 708752228931

by Quality Wheels

—$54.19

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. One 264mm spoke = 7g Nipples sold separately Item Specifications Color Silver Defined Color Silver Length 297 Spoke Interface J-Bend Spoke Profile Straight Gauge Thread Diameter 2.0 DT Swiss Champion 2.0 Silver Spokes Box of 100 Spoke, Bulk EAN: 7613052012278

by DT Swiss

—$24.99

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. Double Butted: 2.0/1.8/2.0 Compatible with straight pull hubs only One 264mm spoke = 5.9g Nipples sold separately Item Specifications Color Black Defined Color Black Length 264 Spoke Interface Straight Pull Spoke Profile Double Butted Thread Diameter 2.0 DT Swiss Competition Straight Pull Black Spokes Spoke, Bulk EAN: 7613052035116

by DT Swiss

—$120.09

Competition Black Spokes for wheel service and repairs. Double Butted: 2.0/1.8/2.0 One 264mm spoke = 6g Nipples sold separately Item Specifications Color Black Defined Color Black Length 276 Spoke Interface J-Bend Spoke Profile Double Butted Thread Diameter 2.0 DT Swiss Competition Black Spokes Spoke, Bulk EAN: 7613052263076

by DT Swiss

—$307.90

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. Intended use = All-Mountain/Trail, Enduro and Freeride Tubeless ready, 30mm wide and light rim Straight-pull hubs/spokes built with a 3-cross pattern Item Specifications Color Black Defined Color Black Front Axle 15mm Thru x 110mm Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rim Width (Internal) 30 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 29" DT Swiss E 1900 Spline Front Wheel Front Wheel EAN: 7613052100111

by DT Swiss

—$453.90

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. Spline Hub with Ratchet LN 18T freehub drive system Intended use = All-Mountain/Trail, Enduro and Freeride Tubeless ready, 30mm wide and light rim Straight-pull hubs/spokes built with a 3-cross pattern Item Specifications Cassette Body Type Shimano Micro Spline Color Black Defined Color Black Hub/Brake Compatibility Center-Lock Disc ISO Diameter 584 / 650b / 27.5" Rear Axle 12mm Thru x 148mm Rim Width (Internal) 30 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 27.5" DT Swiss E 1900 Spline Rear Wheel Rear Wheel EAN: 7613052100005

by DT Swiss

—$218.75

900 Rear Hub Durable Double Time four pawl mechanism offers quick engagement 1.8 mm spacer is included for use with XD cassettes Sealed cartridge bearings Angled flanges provide optimum spoke geometry Axle end caps for alternate frame specs are included (except for Boost hubs) and can be swapped without tools Item Specifications Bearing Type Sealed Cartridge Cassette Body Type SRAM XD Cassette Body Type SRAM XDR Center to Flange, Left 34.25 Center to Flange, Right 20.5 Color Black Defined Color Black Flange Diameter, Left 58 Flange Diameter, Right 60 Hub Drilling 28 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 142mm Rear Axle QR x 135mm Skewer Included Yes Spoke Interface J-Bend Weight 275 SRAM 900 Rear Hub UPC: 710845784767

by SRAM

—$111.90

Track Front HubHigh polish silver aluminum Item Specifications Center to Flange, Left 34.6 Center to Flange, Right 34.6 Color Polished Defined Color Silver Flange Diameter, Left 64 Flange Diameter, Right 64 Front Axle 9x1 Threaded x 100mm Hub Drilling 20 Hub/Brake Compatibility Rim Brake Spoke Interface J-Bend Weight 280 DT Swiss Track Front Hub EAN: 7630024378613

by DT Swiss

—$174.90

XM 481 Rims are tubeless ready and constructed from alloy, ready for your next wheel build. Tubeless-Ready Alloy rim (tape, valves and sealant sold separately) 2.0 silver alloy Prolock Squorx Pro Head nipples and PHR washers included The wheel must be built with the supplied PHR washers and Pro Head nipples. The PHR washer must be positioned between the nipple and rim and fit correctly within the radius of the rim. DT Swiss recommends that the contact area between the nipple and PHR washer is greased ERD and weights shown include PHR washers Intended use is XC, All Mountain and Enduro riding Item Specifications Brake Compatibility Disc Only Brake Track None Color Black Defined Color Black Hub Drilling 28 ISO Diameter 584 / 650b / 27.5" Manufacturer Spec ERD (mm) 563 Rim Center Offset (mm) 0 Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Valve Presta Weight 510 Wheel Size 27.5" DT Swiss XM 481 Rims Rims EAN: 7630033834155

by DT Swiss

—$157.90

RR 521 Rims are tubeless ready and constructed from alloy, ready for your next wheel build.32mm deep and 20mm wide Item Specifications Brake Compatibility Disc Only Brake Track None Color Black Defined Color Black Hub Drilling 32 ISO Diameter 622 / Road / 29" Manufacturer Spec ERD (mm) 581 Rim Center Offset (mm) 0 Rim Material Alloy Rim Width (Internal) 20 Tire Type Tubeless Ready Valve Presta Weight 520 Wheel Size 700c DT Swiss RR 521 Rims Rims EAN: 7630033894128

by DT Swiss

—$4.95

The 2.34mm DT Champion is suited to the big loads occurring in high performance e-bike and tandem wheels Individual spoke for repair or replacement Spoke nipple not included Item Specifications Color Black Defined Color Black Designed for ebike Yes Length 272 Spoke Interface J-Bend Spoke Profile Straight Gauge Thread Diameter 2.34 DT Swiss Champion 2.34 Individual Spoke Spoke, Individual

by DT Swiss

—$54.19

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. One 264mm spoke = 7g Nipples sold separately Item Specifications Color Silver Defined Color Silver Length 258 Spoke Interface J-Bend Spoke Profile Straight Gauge Thread Diameter 2.0 DT Swiss Champion 2.0 Silver Spokes Box of 100 Spoke, Bulk EAN: 7613052011578

by DT Swiss

—$9.85

DT aerolite is the lightest flat spoke in the DT Swiss spoke range with excellent aerodynamic characteristics and a very high stability. The center piece is first reduced and butted to a light 1.5 mm during the cold forging process and subsequently it is bladed. This process again increases the strength of the material and generates the flat shape. This spoke fits hubs with standard spoke holes. Single straight-pull spoke, nipple not included Double Butted: 2.0/0.9/2.0 No slotting necessary; blade is 2.3mm wide Compatible with straight pull hubs only One 264mm spoke = 4.3g Nipples sold separately Item Specifications Color Black Defined Color Black Length 286 Spoke Interface Straight Pull Spoke Profile Bladed/Double Butted Thread Diameter 2.0 DT Swiss Aerolite Straight Pull Individual Spoke Spoke, Individual

by DT Swiss

—$83.99

Popular AR rims have been updated with an asymmetric rim profile, improving spoke tension balance and overall wheel build quality and durability. The rim extrusion has also been improved to increase impact performance for more aggressive applications. Offset nipple bed for improved spoke tension balance and wheel strength/stiffness Tubeless ready with strong tire retention bead Item Specifications Brake Compatibility Disc Only Brake Track None Color Black Defined Color Black Hub Drilling 32 ISO Diameter 584 / 650b / 27.5" Rim Center Offset (mm) 4.5 Rim Material Alloy Rim Width (Internal) 35 Tire Type Tubeless Ready Valve Presta Wheel Size 27.5" RaceFace AR Offset Rim Rims UPC: 821973336008

by RaceFace

—$84.99

SLX Series Rear Hubs provide a simple setup and reliable performance. 142mm O.L.D Easy disc brake rotor installation with spline mount and lock ring Stiff and lightweight Labyrinth & Contact Sealing Item Specifications Bearing Type Loose Ball Cassette Body Type Shimano Micro Spline Color Black Defined Color Black Flange Diameter, Left 61 Flange Diameter, Right 61 Hub Drilling 32 Hub/Brake Compatibility Center-Lock Disc keyword search EFHM9110B Rear Axle 12mm Thru x 142mm Skewer Included No Spoke Interface J-Bend Weight 352 Shimano SLX FH-M7000 Series Rear Hubs Rear Hub UPC: 192790444413

by Shimano

—$257

The Flow MK4 wheelset lets you do more. Corner harder, send it further, and carry more speed through any section of trail. Today's Flow MK4 gives you the control you need to push boundaries. Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires Durable 6069 aluminum with welded joint and reinforced spoke bed BST-Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel build M-pulse ultra-low drag hubs with Enduro bearings Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability Includes tubeless tape and presta valves Item Specifications Color Black Defined Color Black Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Valve Presta Wheel Size 29" Stan's No Tubes Flow MK4 Front Wheel Front Wheel UPC: 847746059912

by Stan's No Tubes

—$61.63

Shimano Pedal Small Parts for service and repair.Fits XTR SPD PD-M9100 left hand pedals Item Specifications Color Silver Pedal Spindle 9/16" Shimano Pedal Small Parts Pedal Small Part UPC: 192790470320

by Shimano

—$57.99

Chester returns to the party with more grip, a second size option and a better ride feel, all with the same tough composite build at a price that any rider can get behind. With fully serviceable internals, eight colors and a Lifetime Warranty inclusive of crashes, you'll be glad to have Chester along for the ride. Chester pedals provide the feel you want with the grip you need, at an exceptional value. Small: 105 x 100mm Chromoly Steel axle Nylon Composite body 11 pins per side, including 9 metal and 2 co-molded plastic 16mm platform height Available in two size options Item Specifications Color Black Defined Color Black Pedal Body Material Composite Pedal Spindle 9/16" Pedal Type Platform Spindle Material Chromoly Weight 345 RaceFace Chester Pedals Pedals UPC: 821973469379

by RaceFace

—$124.80

The Hope MTB Floating Centre-Lock disc brake rotor is a high performance option designed for demanding applications. Constructed in two parts, the aluminum center provides weight savings, while the specially formulated laser-cut 410 stainless-steel braking surface can handle high temperatures without warping. High performance disc allows the stainless steel outer to expand separately from the center to handle high temperatures without warping True floating design allows 1 degree of freedom so outer is always free to expand when subjected to heat CNC machined aluminum center is stiff and lightweight to offer the advantages of a thicker fixed disc without the weight penalty Aluminum center acts as heat sink to keep disc temperatures lower for reliable braking Laser-cut and heat-treated 410 stainless steel braking surface provides increased life and oxidation prevention 1.8mm thickness (1.5mm minimum) Item Specifications Hub/Disc Compatibility Center-Lock Pad Compatibility All Pad Compounds Rotor Size (mm) 220 Rotor Type Two Piece Weight 200.5 Hope MTB Floating Centre-Lock Disc Brake Rotor Disc Rotor EAN: 5056454914504

by Hope

—$117.90

The Hope RX Floating Centre-Lock disc brake rotor is a high performance disc, allowing the stainless steel outer to expand separately from the aluminum centre and handle high temperatures without warping. 2-piece floating design allows the laser cut 410 stainless steel outer to expand separately from the CNC machined center to handle high temperatures without warping True floating design allows 1 degree of freedom so outer is always free to expand when subjected to heat CNC machined aluminum center is stiff and lightweight to offer the advantages of a thicker fixed disc without the weight penalty Aluminum center acts as heat sink to keep disc temperatures lower for reliable braking Laser-cut and heat-treated 410 stainless steel braking surface provides increased life and oxidation prevention Machined round outer edge for safety and easier wheel changing 1.8mm thickness (1.5mm minimum) Item Specifications Hub/Disc Compatibility Center-Lock Pad Compatibility All Pad Compounds Rotor Size (mm) 160 Rotor Type Two Piece Hope RX Floating Center-Lock Disc Brake Rotor Disc Rotor EAN: 5056033482585

by Hope

—$124.80

The Hope MTB Floating Centre-Lock disc brake rotor is a high performance option designed for demanding applications. Constructed in two parts, the aluminum center provides weight savings, while the specially formulated laser-cut 410 stainless-steel braking surface can handle high temperatures without warping. High performance disc allows the stainless steel outer to expand separately from the center to handle high temperatures without warping True floating design allows 1 degree of freedom so outer is always free to expand when subjected to heat CNC machined aluminum center is stiff and lightweight to offer the advantages of a thicker fixed disc without the weight penalty Aluminum center acts as heat sink to keep disc temperatures lower for reliable braking Laser-cut and heat-treated 410 stainless steel braking surface provides increased life and oxidation prevention 1.8mm thickness (1.5mm minimum) Item Specifications Hub/Disc Compatibility Center-Lock Pad Compatibility All Pad Compounds Rotor Size (mm) 200 Rotor Type Two Piece Weight 167.5 Hope MTB Floating Centre-Lock Disc Brake Rotor Disc Rotor EAN: 5056454914382

by Hope

—$61.58

The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. All calipers have 74mm mounting bolt spacing For use with with long cable-pull levers Due to the shape of the brake pad installation tabs, this model is not compatible with Centerlock or HSX rotors Pad retraction and spring tension are adjustable Includes steel-backed sintered pads Item Specifications Brake Caliper Type Post Mount Defined Color Gray Rotor Included No Avid BB7 Mountain Disc Brake Disc Brake Calipers UPC: 710845783562

by Avid

—$124.24

The SRAM RED AXS HRD hydraulic disc brake caliper integrates top technology into an easily personalized premium package. SRAM's HydroHC brake platform offers superior brake control Features a multitude of heat management technologies heat shield, insulated aluminum pistons, and a wider pad pocket Only compatible with SRAM RED eTap derailleurs Built on SRAM's HydroHC brake platform Can be personalized for your preferences with the contact point adjustment feature Bleeding Edge technology offers easy and clean bleeds Item Specifications Brake Caliper Type Post Mount Brake Lever Actuation Hydraulic Defined Color Gray Pad Compound Organic Rotor Included No SRAM RED AXS HRD Hydraulic Disc Brake Caliper Assembly Disc Brake Calipers UPC: 710845796333

by SRAM

—$47.45

EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. Compatible with SRAM HRD, eTap HRD and Road AXS HRD. Will NOT fit SRAM Level Ultimate or Level TLM The EXOTherm2 technology is SwissStop's maximum pad life compound that also offers minimum brake fade Organic compound provides a low pad wear rate Aluminum backing plate is equipped with cooling fins for heat dissipation and is lightweight Smooth, consistent brake performance Item Specifications Backing Plate Material Aluminum Compound Organic Designed for ebike Yes Heat Sink Yes Pad Shape Number 68 SwissStop EXOTherm2 Disc Brake Pad Set Disc Brake Pad EAN: 7640121222948

by SwissStop

—$27.99

These disc brake pads fit a variety of Shimano brakes and offer industry-leading brake compounds for consistent, confident performance. Jagwire Pro E-Bike pads feature a friction compound developed specifically for the unique needs of pedal-assist E-bikes Tuned to provide more stopping power and durability than typical pads, with consistent modulation and little braking noise Steel backing plate Compatible with Shimano XTR (M9020, M9000), Deore XT (M8100, M8000), SLX (M7100, M7000) Deore (M6000, M615), Alfine (S700), Non-Series RS785, R785, CX77, CX75, R517, R515, R317, R315 Compatible with RIDEREVER ARC, Attack, MCX-1 (Post Mount), MCX-2 (Post Mount), MTN-1 Item Specifications Backing Plate Material Steel Compound Semi-Metallic Designed for ebike Yes Pad Shape Number 19 Jagwire Shimano Compatible Disc Brake Pads Disc Brake Pad EAN: 4715910041871

by Jagwire

—$17.99

Formula Compatible Disc Brake Pads 18.5 grams per pair Formerly Jagwire "Red Zone" Item Specifications Fits Formula ORO Springs Included yes Compound Semi-Metallic Jagwire Formula Compatible Disc Brake Pads Disc Brake Pad EAN: 4715910020067

by Jagwire

—$30.62

Endurance series disc pads feature a harder organic compound than the Performance series, giving them a longer wear life but less power.Steel backing plate Item Specifications Backing Plate Material Steel Compound Semi-Metallic Heat Sink No Pad Shape Number 45 Magura Endurance Brake Pads Disc Brake Pad EAN: 4055184003473

by Magura

—$20.76

Shimano disc brake adaptors.Click in individual parts to see detailed descriptions of application Item Specifications Rotor Size 180mm Caliper Type 51mm I.S Brake Caliper Mount 51mm Rear For Rotor Diameter Rear 180 Frame/Fork Mount 51mm IS Rear Shimano Disc Brake Adapter Disc Brake Adaptor UPC: 689228283473

by Shimano

—$295

GRX RX810 Hydraulic Brake Lever Streamlined cockpit minimizes stress and distractions Control adjustable seatpost from lever Anti-slip brake lever Integrated cable pulling system 9 mm max cable stroke Gravel inspired lever and bracket ergonomics Item Specifications Brake Lever Actuation Hydraulic Brake Lever Use Left Defined Color Black Shimano GRX BL-RX810 Brake Lever Brake Lever, Drop Bar Individual UPC: 192790448794

by Shimano

—$235

Housing the same medal-winning technology as SRAM's other Transmission cassettes, their XS-1270 Cassette offers incredible performance with amazing value. Finished in a unique black nickel chrome, this cassette is quiet, durable, and features a replaceable cluster of gears 8-12. And for the first time on a traditional splined driver body, features a full 10-52t range thanks to the 55mm chainline and integration of the 10-tooth cog and lockring. SRAM Transmission (T-Type) cassette offers a complete 10-52t range Compatible with 8-10 speed traditional spline freehub bodies Approved for aluminum driver body use as well as steel on both MTB and E-MTB applications 55mm chainline compatibility for more moderate chain angle, longer wear and greater precision Full X-SYNC design for exceptional inboard and outboard shifting performance under load Finished in a unique black nickel chrome, this cassette is quiet, durable, and features a replaceable cluster of gears 8-12 Item Specifications Cassette Body Type Shimano HG Cogs 10-12-14-16-18-21-24-28-32-38-44-52 Color Black/Silver Defined Color Black Defined Color Silver Drivetrain Speeds 12 Range 10-52 Weight 565 SRAM Eagle T-Type XS-1270 12-Speed Cassette Cassettes UPC: 710845904684

by SRAM

—$29.95

Replacement uppers for a variety of MRP chain guides. Stock upper guide for G5 and SXg chainguides Also fits all AMg, G4, G3, Micro, and 1x v2/v3 chainguides Item Specifications Color Black Defined Color Black MRP Upper Guide Chain Retention System Part UPC: 702430186575

by MRP