Component Specific Tools

—$173.70

High quality hub tools designed to work with DT Swiss components. All the tools you will need to disassemble and reassemble DT Swiss ratchet EXP hubs Includes: bearing disassembly tool (HXTXXX00N6106S), star ratchet disassembly tool (W20x1 HXTXXX00N8387S), short installation cylinder ( 15/26x40MM HXTXXX00N5314S) and long installation cylinder ( 15/24x60MM HXTXXX00N5025S) DT Swiss Hub Tools Other Hub Tool EAN: 7613052330242

by DT Swiss

—$11.89

A nearly indispensable tool for setting up SRAM derailleurs. Item Specifications Drivetrain Speeds 8 SRAM Chain Gap Adjustment Gauge Chain Tool UPC: 710845806872

by SRAM

—$17.95

Park Chain Tool Replacement Pins Includes four hardened replacement pins and one replacement ball bearing for the CT-4 Chain Tool CTP-4K works for CT-4, CT-4.2, CT-4.3 and CT-11 Park Tool Chain Tool Replacement Pins Chain Tool Replacement Pin UPC: 763477002303

by Park Tool

—$17.39

Hope Bleed Syringes for bleeding RX4 calipers. RX4 systems using DOT fluid have a D etched on caliper bore cap. RX4 systems using mineral oil have a M etched on caliper bore cap. Hope RX4 Bleed Syringe Brake Tool EAN: 5056033477840

by Hope

—$64.99

This tool secures the end of a hydraulic hose and allows for installation of the barb. Quickly installs needle inserts with a squeeze of the handle The sliding piston ensures straight installation, while the long lever arm reduces effort. 2-way clamp fits 5.0 and 5.5mm hydraulic hose and features adjustable tension The Needle Starter pin set into the handle can be used to quickly start the needle into the hose The front handle features a textured surface for better grip during operation Jagwire Needle Driver Disc Hose Tool EAN: 4715910041925

by Jagwire

—$59

RockShox Suspension Miscellaneous Tools.Includes two syringes and fittings plus one torx tool RockShox Bleed Kit Suspension Tool UPC: 710845659973

by RockShox

—$13.09

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006271

by Park Tool

—$17.95

Features the Y-head design with lazer cut openings to ensure a tight, accurate fit. Park Tool Headset Wrench Headset Tool UPC: 763477004062

by Park Tool

—$48.50

Thin Flange Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. Compatible with all Wheels Manufacturing (Some FSA MegaEVO) bottom brackets that have the following spline patterns: 48.5mm, 16-notch, 1/2 UNC threaded Press Rod 3/8" drive can be used to allow torque wrench Machined 6061 Aluminum Wheels Manufacturing Thin Flange Bottom Bracket Socket Bottom Bracket Tool UPC: 811079027221

by Wheels Manufacturing

—$10.49

SRAM Brake Lever Tool SRAM Lever Tool Brake Tool UPC: 710845783791

by SRAM

—$33

hlins fork lube is a high-performance suspension fluid engineered for use in motorcycle and mountain bike forks, cartridge kits, and damper systems. It is fully synthetic and designed to reduce internal friction, resist foaming, and maintain stable viscosity across a wide temperature range. Available in multiple viscosities, it enhances responsiveness, durability, and overall ride quality under demanding conditions. Provides excellent lubrication for reduced friction and smoother fork operation Offers ultra-low foaming and stable viscosity even under extreme temperatures Enhances suspension performance and longevity with multiple viscosity options Ohlins Fork Lube Suspension Tool UPC: 840153638770

by Ohlins

—$38

Bearing extractors set for pushing out sealed bearings from bottom bracket cups. Compatible with our 1/2" threaded press rod and handles.Sealed bearing extractor for 29mm ID bearings. Extractor has 1/2" thru hole for use with our 1/2" threaded rod press handles. Wheels Manufacturing Bottom Bracket Sealed Bearing Extractor Set Bearing Tool UPC: 811079025586

by Wheels Manufacturing

—$13.09

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006226

by Park Tool

—$10.99

Jagwire Brake Pad Tuner Designed for easy toe adjustment Works with all rims including deep section rims Jagwire Brake Pad Tuner Brake Tool EAN: 4715910030912

by Jagwire

—$24.26

hlins Air Spring Lube is a premium lubricant engineered specifically for servicing the air suspension systems in hlins forks and shocks. The product is formulated to reduce friction, enhance fork responsiveness, and ensure smooth, consistent suspension performance. Minimizes internal resistance in air spring cartridges, improving responsiveness and ride feel Formulation is non-hazardous and designed for consistent performance across temperature ranges Ohlins Air Spring Lube Suspension Tool UPC: 840153638787

by Ohlins

—$28.95

Park Tool BBT Series Bottom Bracket Tools. Fits 12-notch bottom bracket tool fittings with a major diameter of 48 50 mm and a minor diameter of 46.3 mm, including:Praxis Works M30 Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive Item Specifications keyword search Praxis Works M30 Park Tool BBT Series Bottom Bracket Tool UPC: 763477001375

by Park Tool

—$36.99

High quality tools ensure that headsets are properly serviced. Replacement stepped bushings for HHP-2 Ensures proper headset cup alignment Pair Park Tool Headset Tools Headset Tool UPC: 763477013101

by Park Tool

—$12.95

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006288

by Park Tool

—$11.49

Small, nickel plated wrenches can be used on brakes, derailleurs, etc. 9mm and 11mm open ends Nominal Wrench Thickness: 1/8" (3.2mm) Park Tool Open End Wrench Brake Tool UPC: 763477001177

by Park Tool

—$105

Rear shock tools for repair and maintenance of Rockshox rear shocks. RockShox Rear Shock Tools Suspension Tool UPC: 710845862984

by RockShox

—$10.95

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006349

by Park Tool

—$155

Rear shock tools for repair and maintenance of Rockshox rear shocks. RockShox Rear Shock Tools Suspension Tool UPC: 710845896033

by RockShox

—$9

The Pro Internal Cable Routing Tool uses a rare earth magnet that attaches directly to cables, housing, hydraulic hose, and electronic shifting wire, and can be fed directly though difficult internal setups without the need for a separately routed "lead wire."This pack includes replacement fittings to attach magnet to cables, housing, hydraulic hose, and electronic wire Jagwire Pro Internal Routing Tool Cable Puller EAN: 4715910038765

by Jagwire

—$46.99

Jagwire Disc Brake Multi Tool4-in-1 tool works as a pad spacer, bleed block, rotor truer and piston pres Jagwire Disc Brake Multi Tool Brake Tool EAN: 4715910030943

by Jagwire

—$104.99

Elite Bleed Kits feature premium syringes and components designed for the professional mechanic. Extra-long 16cm hose included for filling brake fluid from bulk canisters Compatible with most DOT fluid hydraulic disc brakes from Avid, SRAM, Formula, Hayes, and Hope Black seals provide easy identification for use with DOT fluid systems only Premium syringes offer enhanced clarity, improved durability, and ergonomic handles Innovative quarter-turn valves make it easy to quickly open and close the bleed system Straight and 90-degree clips keep the syringe upright to lend an extra hand to the technician Includes bleed blocks for most popular 2-piston and 4-piston brake calipers Jagwire Elite Bleed Kit Brake Tool EAN: 4715910042519

by Jagwire

—$100

Rear Shock Tools FOX Rear Shock Tools Suspension Tool UPC: 821973455945

by FOX

—$40

Easy to use chain breaker tool for single speed through 11 speed chains. Reversible pin for longer tool life Replaceable pin Item Specifications Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 5 Drivetrain Speeds 6 Drivetrain Speeds 7 Drivetrain Speeds 8 Drivetrain Speeds 9 Drivetrain Speeds Single KMC Reversible Chain Tool Chain Tool UPC: 766759000028

by KMC

—$36

Tools designed by Shimano to service Bottom Brackets. Fits Ultegra SM-BBR60 bottom bracket cups Does not fit standard size Shimano Hollowtech II bottom bracket cups 1/2' socket drive Shimano Bottom Bracket Tool Bottom Bracket Tool UPC: 689228395428

by Shimano

—$225

This drift and over axle set is used to install common-sized thru-axle hub and frame sealed bearings. Originally Press-3 & Drift Set Hub 1 Compatible with the 3/8 Wheels Mfg. BP0001, BP0005, Press 1 handles and rod Originally Driftset-Hub1 - Press-3 Wheels Manufacturing Bearing Drift Set Essential Kit Bearing Tool UPC: 811079027054

by Wheels Manufacturing

—$6.75

Tools designed by Shimano to service Bottom Brackets. Plastic bottom bracket tool adaptor to fit SM-BB9000 cups Designed for use with Shimano TL-FC24, TL-FC32 (TL6137) or similar bottom bracket tool Included in initial shipment of Dura-Ace BB9000 bottom brackets Shimano Bottom Bracket Tool Bottom Bracket Tool UPC: 689228945623

by Shimano

—$12.89

Park Chain Tool Replacement Pins Park Tool Chain Tool Replacement Pins Chain Tool Replacement Pin UPC: 763477004741

by Park Tool

—$115

Tools for maintaining RockShox suspension forks. Use to remove air shaft and damper shaft Reverse threaded RockShox Suspension Fork Tools Suspension Tool UPC: 710845755095

by RockShox

—$20.40

Shimano Mineral Oil Disc Brake Fluid Not compatible with all Shimano brakes Compatible with XTR M9200, M9220, Deore XT M8200, M8220 Cannot be mixed with regular mineral oil Non-corrosive mineral oil that offers excellent heat expansion properties Mineral oil will not absorb water from the air Not caustic and is non-toxic Shimano Mineral Oil Brake Tool UPC: 192790309712

by Shimano

—$83

FOX clamp tools for various models. FOX Clamps Suspension Tool Suspension Tool UPC: 821973417028

by FOX

—$125

The KMC Digital Chain Wear Indicator provides a quick and accurate way to assess the condition of your bike chain. Its digital display offers precise measurements, helping you determine when it's time for maintenance or replacement. Compact and easy to use, it's a valuable tool for cyclists looking to maintain optimal performance and prolong the life of their chains. Fits all chains including 11-speed Measures up to 2.5mm of elongation and displays measurement on the digital screen Stainless hardened metal body for durability Provides quick and accurate assessment of bike chain condition Compact and easy-to-use design Digital display offers precise measurements for maintenance or replacement timing KMC Digital Indicator Wear Indicator UPC: 766759000011

by KMC

—$30

RockShox Suspension Tools RockShox Rear Shock Tools Suspension Tool UPC: 710845663307

by RockShox

—$30

RockShox Suspension Seal Installation Tools.Works on Totem Item Specifications Manufacturer Number 114015207000 RockShox Suspension Fork Tools Suspension Tool UPC: 710845312397

by RockShox

—$27.95

Features the Y-head design with lazer cut openings to ensure a tight, accurate fit. Park Tool Headset Wrench Headset Tool UPC: 763477004079

by Park Tool

—$22.65

Our universal bottom bracket frame drift is designed to press all current Wheels Mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters, each step is laser etched with the diameter size. Inner hole sized to fit 1/2" threaded rod. Not for use with our PRESS-1 or PRESS-4 Compatible with any other press with a 1/2" diameter rod Recommended for use with Wheels Mfg BP0006, BP0007 Machined aluminum Anodized Red Sold individually Wheels Manufacturing Bottom Bracket Frame Drift Bearing Tool UPC: 811079027160

by Wheels Manufacturing

—$66

The Adjustable Press Stop slides along 1/2" UNC threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings. Compatible with Wheels Manufacturing press kits: BP0006, BP0007, BP0008, Press-7, Press-7-Pro, Press-8, and Press-9-Pro Machined aluminum body, anodized red Durable steel button For use with 1/2" UNC threaded press rod Wheels Manufacturing Adjustable Press Stop Bearing Tool UPC: 811079027023

by Wheels Manufacturing

—$11.49

Piston removal tool for servicing SRAM disc brakes.Includes plug & removal block SRAM Piston Removal Tool Brake Tool UPC: 710845838965

by SRAM

—$43.30

High quality hub tools designed to work with DT Swiss components. DT Swiss Hub Tools Other Hub Tool EAN: 7613052361826

by DT Swiss

—$24

Tools designed by Shimano to service Bottom Brackets.Fits BB-7700, BB-6500, BB-5500, BB-ES70, BB-ES50 and BB-ES25 bottom brackets Shimano Bottom Bracket Tool Bottom Bracket Tool UPC: 689228000353

by Shimano

—$17.39

Hope Bleed Syringes for bleeding RX4 calipers. RX4 systems using DOT fluid have a D etched on caliper bore cap. RX4 systems using mineral oil have a M etched on caliper bore cap. Hope RX4 Bleed Syringe Brake Tool EAN: 5056033477857

by Hope

—$12.79

The Thru-Axle Chain Keeper is an ideal solution for keeping your bike chain secure during bike washing, tune-ups and traveling. This elegant, lightweight, bio-based plastic design fits perfectly on the axles of 12mm thru-axle dropout systems, no tools required. By keeping chain tension with the Thru-Axle Chain Keeper, you can be confident your bike is safe during drivetrain cleaning or travel. Fits 12mm Thru-Axle dropouts Prevents the chain from slapping against delicate and painted frame surfaces High-density, solvent resistant, Bio-based PA56 roller is easy on your chain, yet incredibly durable SAG Sustainability Action Group approved - bio-based material, low packaging volume, and mono-material for easy recycling Feedback Sports Thru-Axle Chain Keeper Other Hub Tool UPC: 817966011366

by Feedback Sports

—$45

The Feedback Sports Chain Tool 3.0 is designed to work with 1-12 Shimano, 1-12 SRAM, and 13 speed Campagnolo. Features a 360 degree backside plate support structure to ensure chain pins are pressed perfectly, every time. Oversized, comfortable, knurled texture rubber handle provides secure grip Broad, high-leverage pin press paddle makes quick work of the most stubborn chain pins Soft close push pin handle CNC-machined pin driver threads provide deliberate and consistent pressure for efficient pressing Compatible with Shimano and SRAM 7, 8, 9, 10, 11, 12 speed chains, and single-speed style chains Extra replacement pin included, conveniently secured inside storage cavity in the handle Limited lifetime warranty; fully serviceable Item Specifications Drivetrain Speeds 12 Drivetrain Speeds 13 Feedback Sports Chain Tool 3.0 Chain Tool UPC: 817966011151

by Feedback Sports

—$171

These extractors remove sealed bearings with inside diameters from 8, 9, 10 ,and 12mm. Bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer. Originally Press-5 Removes these sealed bearing sizes: 608, 609, 6000, 6001 Wheels Manufacturing Sealed Bearing Extractor Set for Hub Bearings Essential Kit Bearing Tool UPC: 811079027122

by Wheels Manufacturing

—$84.99

Hydraulic line cutting tools provide precise, repeatable cuts in a convenient handheld package. Innovative design provides extra leverage for smooth, clean cuts The ergonomically shaped front grip and rubber- inset rear handle make the tool easy to hold and use for all-day comfort. With premium aluminum construction, this tool is built for professional workshops with a long lever am to provide smooth cutting action and a razor-sharp cut The hydraulic hose sits in a specially designed cradle to ensure a perfect, perpendicular cut every time. Replaceable cutting blades(not included) to keep the tool in operation for years Jagwire Hydraulic Brake Line Cutter Disc Hose Tool EAN: 4715910041918

by Jagwire

—$10.08

Hope DOT 5.1 hydraulic brake fluid is a high-performance fluid designed for use in Hope hydraulic braking systems. It is formulated to provide excellent braking performance and reliability under extreme conditions. This brake fluid is compatible with all Hope hydraulic brakes and is ideal for riders who demand the best from their braking systems. Hope DOT 5.1 brake fluid has a high boiling point, which helps prevent vapor lock and ensures consistent braking performance even under extreme conditions Compatible with all Hope hydraulic brakes, making it a versatile choice for various braking systems Designed to be safe and reliable, meeting all necessary safety standards and regulations Hope Hope Hydraulic Brake Oil - DOT 5:1 Brake Tool EAN: 5055168051185

by Hope

—$51

Shimano Mineral Oil Disc Brake Fluid Not compatible with all Shimano brakes Compatible with XTR M9200, M9220, Deore XT M8200, M8220 Cannot be mixed with regular mineral oil Non-corrosive mineral oil that offers excellent heat expansion properties Mineral oil will not absorb water from the air Not caustic and is non-toxic Shimano Mineral Oil Brake Tool UPC: 192790309736

by Shimano