Component Specific Tools

—$47.95

Bottom brackets have some of the highest torque specs of any component found on a bicycle. Despite this, some bottom bracket cups feature tool fittings that allow mere millimeters of engagement, which can be a problem when attempting removal or installation. Solution: the Park Tool Bottom Bracket Tool Retaining System. Used in conjunction with nearly any Park Tool bottom bracket tool, the BBT-RS uses a spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. The BBT-RS can be configured for use with the vast majority of threaded and thread-together bottom bracket standards. The BBT-RS features an M8 threaded rod and a double-sided adapter nut with M12 and M15 threads, allowing it to thread directly into any compatible cartridge bottom bracket. The M15 adapter can also be used to install any of Park Tool's nine aluminum bottom bracket tools, all of which feature integrated threading for use with the BBT-RS. Washer diameter: 57 mm (2.25") Rod length: 175 mm (6.9") Rod threading: M8 x 1.0 Adapter nut threading: M12 x 1.0 & M15 x 1.0 Park Tool BBT-RS Bottom Bracket Tool Retaining System Bottom Bracket Tool UPC: 763477001603

by Park Tool

—$45

Tools for maintaining RockShox suspension forks. RockShox Suspension Fork Tools Suspension Tool UPC: 710845838910

by RockShox

—$269.95

High quality tools ensure that headsets are properly serviced. Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork New for 2013, the tool is fully adjustable, allowing precise, independent positioning of each blade around the crown race Locating each blade independently provides flexibility to fit around crown race interferences Universal design works with 1", 1-1/8", 1-1/4" and 1.5 forks (suspension or rigid) and crown races with outside diameters up to 64mm Accepts steering columns up to 430mm in length All steel construction Park Tool Headset Tools Headset Tool UPC: 763477002129

by Park Tool

—$109.95

High quality tools ensure that headsets are properly serviced. Includes: one universal setting tube, three 1" inserts, and three 1-1/8" inserts Works on forks of 340mm column length or less By using different inserts to ensure proper fit on the race, the bearing surface is spared damage The CRS-1 services in SHIS sizes 26, 27, 30 Park Tool Headset Tools Headset Tool UPC: 763477002181

by Park Tool

—$16

The Rotor Truing Fork 2.0 can eliminate warped disc rotors with two different tuning depths. It is a great solution for the shop, or while traveling. Deep, 2mm truing slot plus shallow 2.0mm and 2.3mm slots for different rotor depths Strong steel core with overmolded nylon surface Angled design promotes ample spoke clearance and efficient leverage Tapered tip can double as a brake pad piston press Non-marking nylon rotor truing surfaces Feedback Sports Rotor Truing Fork 2.0 Brake Tool UPC: 817966011373

by Feedback Sports

—$11.95

Tools designed by Park Tool to service Bottom Brackets. Uses a 1" hex shape Fits the splined 12-tooth Campagnolo bottom bracket cups found on the square type spindle systems (Record, Chorus, Centaur and Athena) Removes and installs Campagnolo cassette lockrings including 11 speed Park Tool BBT Series Bottom Bracket Tool UPC: 763477003515

by Park Tool

—$35.50

The Wheels MFG Centerlock Socket is designed to create a tight grip on a standard 44mm Centerlock Rotor Lockring to avoid slipping while torquing lockrings onto Centerlock Hubs. Designed to be used with a 3/8" drive socket or torque wrench for easy installation and removal. The socket can also be used with 3/8" ACME threaded press rods and adjustable press stop mini to prevent slipping. (Not Included). Precision machined 6061 aluminum Anodized red 3/8" drive interface Wheels Manufacturing Centerlock Socket Tool Other Hub Tool UPC: 811079029553

by Wheels Manufacturing

—$13.95

Rear shock tools for repair and maintenance of Rockshox rear shocks. RockShox Rear Shock Tools Suspension Tool UPC: 710845801631

by RockShox

—$130

The SRAM Pro Disc Brake Bleed Kit is designed for servicing SRAM disc brakes systems. High-quality syringes and hoses for precise bleeding Compatible with various SRAM brake models Includes essential tools like bleed blocks and adapters Ensures optimal brake performance with regular maintenance SRAM Bleed Kit Brake Tool UPC: 710845917769

by SRAM

—$32.95

The EP-1 is purpose-built to securely install end caps onto brake, derailleur, and dropper post cables. The short tapered jaws with dual crimping positions make it ideal for crimping in tight, inaccessible spaces. Built from forged machined steel with vinyl-dipped handles. Designed to install end caps on brake, derailleur, and dropper post cables Short tapered jaws with dual crimping positions for tight, inaccessible spaces Made from forged machined steel for long-lasting use Vinyl-dipped handles for a secure and comfortable grip Park Tool EP-1 End Cap Crimping Pliers Cable Cutter UPC: 763477003034

by Park Tool

—$70

The SRAM Pro Disc Brake Bleed Kit is designed for servicing SRAM disc brakes systems. High-quality syringes and hoses for precise bleeding Compatible with various SRAM brake models Includes essential tools like bleed blocks and adapters Ensures optimal brake performance with regular maintenance SRAM Bleed Kit Brake Tool UPC: 710845905643

by SRAM

—$32.95

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, Presta valve core remover, valve stem lock nut wrench and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self closes the tool. Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman) Master links are not included Tire lever not recommended for use on carbon rims Weight: 38.5g Material: 7075-T6 aluminum Made in the USA Wolf Tooth Masterlink Combo Pack Pliers Chain Tool UPC: 812719028400

by Wolf Tooth

—$10.25

Shimano Chainring Nut Wrench with dustcap tool. Shimano Chainring Nut Wrench Chainring Tool UPC: 689228228818

by Shimano

—$29

Installation and removal tool for chainring lock ringsFor use with XTR M9100 and M9120 cranksets Shimano Direct Mount Chainring Lockring tool Chainring Tool UPC: 689228699267

by Shimano

—$13.09

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006264

by Park Tool

—$25.95

Bicycle disc brake rotors can become warped from extensive use, excessive heat, or impact. Even new disc rotors may not always be perfectly straight, causing annoying pad rub and affecting performance. The Park Tool DT-2.2 is specially designed and precisely manufactured to gently adjust bent bicycle disc brake rotors. The DT-2.2 features one long slot and two short slots for maximum compatibility with any rotor design or thickness up to 2.5 mm. Constructed from high quality steel with a vinyl dipped handle for comfort.Compatible with rotors up to 2.5mm thick Park Tool DT-2.2 Rotor Truing Fork Brake Tool UPC: 763477003065

by Park Tool

—$45

Tools for maintaining RockShox suspension forks. RockShox Suspension Fork Tools Suspension Tool UPC: 710845848261

by RockShox

—$12.49

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006325

by Park Tool

—$65

Rear shock tools for repair and maintenance of Rockshox rear shocks. RockShox Rear Shock Tools Suspension Tool UPC: 710845817236

by RockShox

—$30

Rear shock tools for repair and maintenance of Rockshox rear shocks. RockShox Rear Shock Tools Suspension Tool UPC: 710845880964

by RockShox

—$145

This tool set is designed to fully service DT Swiss hubs and other hub manufacturers that utilize DT Swiss hub internals. The set includes all the bearing guide sizes for front and rear hubs, two low-drag silicone freehub seals and a high-quality, ratchet removal tool. Enduro DT Hub Tool Kit Other Hub Tool UPC: 811780024656

by Enduro

—$32

Enduro calls it a TorqTite wrench but it actually does a lot more than that. This Tool allows you to tighten and loosen TorqTite bottom bracket cups for BB86/92, BB386 and PF30 BB shells, as well as, outboard BSA/ITA cups for 24mm spindles and all T47 cups. The BB86/92 side also works for centerlock disc brake lock-rings. Allows you to tighten and loosen TorqTite bottom bracket cups for BB86/92, BB386 and PF30 BB shells, as well as, outboard BSA/ITA cups for 24mm spindles and all T47 cups BB86/92 side also works for centerlock disc brake lock-rings This item is a single wrench, though Enduro recommends two for proper TorqTite BB installation, or a single wrench can be used in conjunction with BBT-001, BBT-015, BBT-029 or BBT-025 on the opposite side Constructed from rugged steel featuring a corrosion-resistant black finish that is designed to provide high strength for precise torque application, preventing slippage during the installation and removal of TorqTite bottom bracket cups Item Specifications keyword search spanner Enduro Torqtite Flat Wrench Bottom Bracket Tool Bottom Bracket Tool UPC: 811780020757

by Enduro

—$15.76

Press adaptors for sealed bearing installation press. Compatible with PRESS-1 or PRESS-4 handles Sold individually Inner hole sized to fit 3/8" ACME threaded rod Sold individually (2 drifts required for some installations) Wheels Manufacturing Press Adaptors Bearing Tool UPC: 836572009499

by Wheels Manufacturing

—$21.99

TRP Mineral Oil Brake Fluid boasts excellent thermal stability, ensuring consistent performance even under extreme temperatures. This advanced formula minimizes heat buildup, reducing the risk of brake fade and ensuring smooth, controlled stops every time. Say goodbye to spongy brakes and experience the difference that TRP Mineral Oil Brake Fluid brings to your cycling adventures. Not only does TRP Mineral Oil Brake Fluid excel in performance, but it also prioritizes the longevity of your braking system. This high-quality fluid is engineered to provide superior protection against corrosion, extending the lifespan of your brake components and promoting smooth operation. Trust in TRP Mineral Oil Brake Fluid to keep your brakes in top-notch condition, mile after mile. Maintaining your brakes has never been easier with TRP Mineral Oil Brake Fluid. Its low-viscosity formulation ensures effortless bleeding and compatibility with various brake systems. Whether you're a seasoned mechanic or a DIY enthusiast, you'll appreciate the user-friendly nature of this brake fluid, allowing for quick and hassle-free maintenance. Elevate your braking experience with TRP Mineral Oil Brake Fluid. Combining performance, reliability, and convenience, this 100ml bottle is the ultimate choice for those who demand the best from their brake systems. Don't compromise on safety or performance – trust in TRP Mineral Oil Brake Fluid to deliver unrivaled braking excellence. For all TRP and Tektro hydraulic braking systems. Non-corrosive mineral oil. Increased Boiling point to 270 degrees C Decreased viscosity for better fluid flow TRP Mineral Oil Brake Fluid Brake Tool EAN: 4717592033083

by TRP

—$29.95

Park Tool bottom bracket tools for installation and removal of 16 notch bottom brackets. Fits 16-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 39-40 mm and a minor diameter (inside of notches) of 37.6 mm Fits Shimano XTR BB93, Dura-Ace BB9000, and Token Also fits Shimano STEPS square spindle e-bike systems including: E6000, E6002, E6050 Replacement for Shimano TL-FC38 tool Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477001610

by Park Tool

—$64.99

The Piston Spreader simultaneously pushes the pistons back into the caliper with parallel spreading plates in preparation for brake pad replacements. Tektro Piston Spreader Brake Tool EAN: 4717592035964

by Tektro

—$29.95

Simple and precise cleat fitting tool provides critical alignment for cleats giving riders maximum pedal efficiency.For installing Crank Brothers Style cleats on shoes Ergon TP1 Cleat Fitting Tool Measurement Tool EAN: 4260012356694

by Ergon

—$44.95

This lightweight chainwhip is strong enough to be your go to chainwhip, but light enough that you won't need to leave it at home when on the move. Compatible with any cassette up to and including 12 speed cassettes Design and manufactured in Minneapolis, MN USA 7075-T6 Aluminum Wolf Tooth Chain Whip Chain Whip & Cog Holder UPC: 812719026789

by Wolf Tooth

—$24.26

hlins Renolit SI 410 M Silicone Grease is a high-performance, non-aging lubricant formulated with calcium soap. It is specifically designed for use in hlins suspension systems, including fork seals and air spring internals. This grease offers excellent water resistance, low friction, and compatibility with most elastomers and plastics (excluding silicone rubber). With a wide operating temperature range from -55 C to +130 C, it ensures reliable sealing and long-lasting protection for suspension components. Performs reliably from -55 C to +130 C, making it suitable for diverse environmental conditions Maintains sealing integrity and lubrication even in wet conditions, with minimal evaporation loss Ideal for hlins fork seals and air spring internals, enhancing service performance and longevity Ohlins Renolit SI 410 M Silicone Grease Suspension Tool UPC: 840153638794

by Ohlins

—$75

RockShox Bleed Kits for servicing various RockShox suspension components. RockShox Bleed Kit Suspension Tool UPC: 710845909016

by RockShox

—$79.99

Pro Bleed Kits include state-of-the-art fittings, syringes, and fluid for an effective, repeatable bleed. Includes syringes and universal adapters with squeeze valves Compatible with most mineral oil hydraulic disc brakes from Shimano, Magura, Tektro, TRP, and Hayes Red seals provide easy identification for use with mineral oil systems only Jagwire Pro Bleed Kit Brake Tool EAN: 4715910042922

by Jagwire

—$40

The SRAM chain wear indicator tool is compatible will all the existing SRAM chain models and this includes HARD CHROME and non-HARD CHROME chain technology with a 0.8% wear critical specification. SRAM Chain Wear Tool Chain Tool UPC: 710845871009

by SRAM

—$45

Bearing-size specific cartridge bearing removal tool. Individual extractor for removing 6805 sealed bearing Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing Tap the extractor out with a punch Wheels Manufacturing Bearing Extractor Bearing Tool UPC: 836572005088

by Wheels Manufacturing

—$10.95

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006363

by Park Tool

—$32.95

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, Presta valve core remover, valve stem lock nut wrench and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self closes the tool. Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman) Master links are not included Tire lever not recommended for use on carbon rims Weight: 38.5g Material: 7075-T6 aluminum Made in the USA Wolf Tooth Masterlink Combo Pack Pliers Chain Tool UPC: 812719027076

by Wolf Tooth

—$76.30

High quality hub tools designed to work with DT Swiss components.Includes axle disassembly tool and short disassembly cylinder for 2010+ 240S front hubs DT Swiss Hub Tools Other Hub Tool EAN: 7613052127378

by DT Swiss

—$29.95

High quality, long service life, cast CrMo steel construction chain tool for single and multi-speed chains up to 13 speed, including Campangnolo hollow pin chains. Built-in clip holds tool pieces together. Contains 4 and 5mm Allen wrenches and chain hook. CrMo steel chain tool, 4 / 5 mm Allen wrenches, steel wire chain hook Chain hook holder, chain pin holder, and chain pin breaker Topeak Super Chain Tool II Chain Tool UPC: 883466036277

by Topeak

—$30.95

Park Tool BBT Series Bottom Bracket Tools. Fits 16-notch bottom bracket tool fittings with a major diameter of 48 50 mm and a minor diameter of 46.4 mm, including:FSA MegaEvo, and Wheels Mfg Thread Together Does not fit Hope BSA30 Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive Item Specifications keyword search FSA MegaEvo keyword search Wheels Mfg Thread Together Park Tool BBT Series Bottom Bracket Tool UPC: 763477001368

by Park Tool

—$39

Shimano tools for installation and removal of lockring for cassette, and disc rotors.Fits cassette and rotor lockrings Shimano Cassette Lockring Tools Freewheel Tool UPC: 689228890701

by Shimano

—$28.99

OneUp Components EDC Top Cap, Purple The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes.  Check fork compatibility.   KIT INCLUDES EDC TOP CAP EDC steerer plug 2x 1mm, 3mm, & 5mm Headset Spacers    INSTALL THE EDC TOP CAP You need a minimum of 5mm of headset spacer above the stem and your steerer tube should be 1-2mm below the top of this spacer. Apply a small amount of grease to your newly cut thread and screw in your new EDC top cap. The Top Cap interface uses a standard cassette lockring tool. You do not need to apply much torque as you are only preloading the bearings. (Your stem pinch bolts are what holds your fork in place). The EDC multitool contains a top cap tightening tool. So even when riding you always have the ability to tighten your headset if need be.  Align your stem and tighten your stem bolts to the manufacturers recommended torque.  The final step is to insert the plastic bung/plug into the bottom of your fork. Turn your 8mm hex sideways and use it to push the plug into the fork by pulling the 8mm towards your chest. This piece holds the bottom of the EDC Tool and stops it from rattling. It also keeps dirt out of your fork and has a small drain hole. Note* The EDC Tap kit includes a star nut puller and self aligning tap Patents Pending All compatibility and fit determinations have been made solely by OneUp. Use of this or any other aftermarket product may void any warranty you have with the original part manufacturer. OneUp EDC Top Cap Headset Tool

by OneUp

—$16.95

The Dummy Pedal allows for easy adjustments. Quickly installs to take the place of a pedal when making adjustments during bike assembly Use of the DP-3 is much quicker than threading a pedal into the crank and then unthreading it after the bike is assembled Park Tool Dummy Pedal Pedal Tool UPC: 763477002815

by Park Tool

—$13.09

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006240

by Park Tool

—$206

The Headset Press Pro Install Kit is a robust, and easy to use tool. The kit includes a machined aluminum handle, 1/2" threaded rod, two machined aluminum drifts and the Adjustable Press Stop allowing for easy drift placement. One drift is machined with multiple steps to fit common head tube inner diameters listed in the Compatibility tab below. The other drift has two sizes to press in cups with either 1-1/8" or 1-1/2" bearings. Originally Press-8 Machined aluminum handle and drifts Red anodized drifts and handles Zinc-plated 1/2" diameter threaded rod Long threaded rod works with long head tubes up to 250mm Wheels Manufacturing Headset Press Pro Install Kit Headset Tool UPC: 811079027108

by Wheels Manufacturing

—$268.10

High quality hub tools designed to work with DT Swiss components. DT Swiss Hub Tools Other Hub Tool EAN: 7613052306544

by DT Swiss

—$105

RockShox Suspension Tools RockShox Rear Shock Tools Suspension Tool UPC: 710845730597

by RockShox

—$38.50

hlins High Performance Suspension Fluid is a premium-grade lubricant engineered for use in forks, shocks, and cartridge kits across hlins suspension systems. Designed to deliver consistent damping and minimal fade under extreme conditions, it features ultra-low foaming and stable viscosity across a broad temperature range. Its formulation reduces friction and wear, extending service intervals and enhancing responsiveness. Available in multiple viscosities, it supports a wide range of applications from racing to mountain biking. Minimizes friction and wear on fork internals, ensuring longer service life and consistent damping Maintains stable viscosity and negligible fade even under extreme temperature variations Highly resistant to cavitation, improving responsiveness and reliability in demanding conditions Ohlins High Performance Suspension Fluid Suspension Tool UPC: 840153616761

by Ohlins

—$21.70

The XTR Cap Driver is specifically designed to remove and install the crank arm bolt cap on Shimano-XTR-M9100 series crank arms. Servicing crank arms or removing damaged M9100 crank arm bolts has never been easier. Designed to be used with a 3/8" drive socket or torque wrench for easy installation and removal. 3/8" drive interface Precision machined aluminum Anodized Red Wheels Manufacturing XTR Cap Driver Crank Arm Tool UPC: 811079029577

by Wheels Manufacturing

—$344.95

Hub bearing press kit that fits nearly every model of cartridge bearing and hub. Designed to press bearings into a wide variety of cartridge bearing-type bicycle hubs Includes quick release bearing presses, aluminum pilots, spacers and bushings to work with more than 20 different cartridge bearing sizes and multiple axle configurations Park Tool Bearing Press Other Hub Tool UPC: 763477003775

by Park Tool

—$20.95

Holds an axle in place using a bench vise, so it will not turn while work is done on the hub.2 different diameter receptacles for front and rear axles Park Tool Hub Axle Vise Other Hub Tool UPC: 763477000101

by Park Tool

—$15.95

The FCT-1 is a versatile tool for easy and damage-free removal of suspension fork caps, which can be difficult to remove by hand when overtightened. The six sides of the FCT-1 correspond to the most popular fork cap designs for a snug and secure fit. NOTE: Do not use the FCT-1 to overtighten fork caps. Always follow manufacturer recommendations for fork cap installation Compatible with select suspension top caps from the following manufacturers: FOX, RockShox, DVO, Marzocchi, hlins Park Tool FCT-1 Fork Cap Tool Suspension Tool UPC: 763477009258

by Park Tool