Unno Mith Race Build - Black/Raw/Bronze

MULLET WHEELS / 160MM REAR TRAVEL / EMTB

The Mith is Unno's first jump into the EBike market, and in true Unno fasion, they made a statement with looks and performance. This all-new bike utilizes 160mm of rear travel and 170mm up front along with a mullet wheel setup. Unno currently offers one build kit utilizing a Bosch Performance Line CX Gen4 750WH Battery & Kiox 300 display, Fox Factory suspension, Crankbrothers alloy synthesis wheels wrapped in Maxxis rubber, a SRAM AXS Drivetrain and Formula Cura 4 brakes. The Mith also features their new integrated bar/stem combo to add to the sleekness of the design.

REAL AUTONOMY. NO BULLS*?T.

Endless adventures in the woods or bigger-than-conventional weekday spins racing against the sunset at full gas mode. You decide how you want to spend your 750Wh battery. And, since this is a bike to give it all, we designed our own motor plate.

KINEMATICS

We are suspension system developers. Our e-bike optimised virtual pivot link is specially created to seize every single millimetre of the 160 available. A 35% sag set up is recommended (+/-5%). Use air or coil shocks at your own taste!

PIONEERS IN GEOMETRIES

Since it's the first time we do sizes at Unno, we wanted to make them properly. Choose between reach-based sizes: S1, S2 and S3. Watch out! At 35% recommended SAG, geometries become longer, lower and slacker than others! Ask us if you're in doubt.

SAY YES TO RECYCLED PLASTIC

The global sourcing engine for responsible plastic. At Unno they partenered up with Oceanworks and developed all resin parts of the frame with recycled nylon. Thier small grain of sand for a better world.

DESIGNED TO GO ALL OUT

A platform that delivers ultimate stability and fun. An easy to ride bike always willing to press send. Thanks to its double row EnduroMAX bearings, the bike feels stiff and smooth at all times even in the most hardcore terrains. And yup, there was no other way than giving it a disruptive, iconic, Unno-like look!

Like the BURN, the Mith also comes in the same 3 frame sizes named S1, S2, and S3 to fit riders from 5'4" to 6'4".

Specs

• Frame:Carbon fiber, high strength fibers, 150mm travel, Enduro Max Dual row bearings, Resign parts made from recycled plastics Geometry, Boost 12x148mm rear axle, integrated Bosch Screen, integrated dropout speed sensor, exclusive plastic motor covers
• Rear Shock:Fox Float X2 LV, 230x65mm.
• Fork: Fox 38 29 Float FIT GRIP EVOL Performance, 170mm
• Headset:Integrated with internal routing, tapered for 1-1/8” to 1-1/2” head tube
• Stem:Deux Enduro Bar/Stem 40mm length
• Bars:Deux Enduro Bar/Stem 800mm wide, 20mm rise, 7 backsweep, 5 upsweep
• Grips:Lizard Skin Lock On
• Seat Post:Fox Transfer Factory
• Saddle:Selle Italia sLR Boost
• Brakes:Formula Cura 4
• Front Rotor:Formula Rotor 220mm
• Rear Rotor:Formula Rotor 203mm
• Wheels:Crank Brothers Synthesis Alloy E-Bike
• Front Tire:Maxxis Assegai 29x2.5, tubeless ready, 3C MAXX TERRA, EXO+
• Rear Tire:Maxxis Minion DHR II 29x2.4, tubeless ready, 3C MAXX TERRA, EXO+
• Cranks:E13 Alloy Bosch Cranks, 160mm
• Chainring:Sram X-Sync 2 Eagle 36T, steel, narrow-wide, Bosch Direct Mount
• Chain:Sram GX Eagle, 12s, Powerlock
• Cassette:Sram PG-1275, 10-50T, 12s
• Rear Derrailleur:Sram GX Eagle AXS
• Shifter:Sram GX EAgle AXS
• Motor:Bosch Performance Line CX Cruise (25Km/h) GEN4
• Battery:Bosch Powertube 750Wh

*On the cart page, please specify in the notes/special instructions section if you'd like to specify your BB to saddle height so we can cut the cables as nicely as possible or any other minor preferances for the bike. Allow 1-2 weeks for bike to be built and ready to ship or pickup.