—$2,295

Berd Hawk27 Wheels with Industry Nine Hydra Hubs Berd’s new Hawk27 are ideal for cross country and trail racing and riding, the new Hawk27 wheels combine lightweight and vibration damping Berd spokes with 27mm internal carbon rims. The Hawk27 wheels are made entirely in North America, with Berd’s spokes being made in the USA and the carbon rim being made by We Are One Composites in Canada all wrapped around an Industry Nine Hydra hub, also made in the USA. The Hawk27 rims are only 18mm deep, which are the lowest profile 27mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd’s new rims spread out tire/rim impacts across a larger surface area to prevent tire damage during acute impacts. The Hawk27 wheelset is built around black Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability, along with remarkably low weight. Technical Specifications: Wheelset Weight: 1375g (Includes rim tape and valves) Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: Industry Nine Hydra Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Black Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty BERD Hawk27 Wheelset

by BERD

—$2,295

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: I9 Hydra Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,295

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: I9 Hydra Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,295

Berd Hawk27 Wheels with I9 Solix Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: I9 Solix Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,095

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Talon Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,095

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Talon Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,095

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Talon Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,095

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Talon Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,095

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Talon Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,295

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: I9 Hydra Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,295

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: I9 Hydra Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,295

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: I9 Hydra Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,295

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: I9 Hydra Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,095

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Talon Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,095

Berd Hawk27 Wheels with Talon Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: Talon Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,295

Berd Hawk27 Wheels with I9 Solix Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: I9 Solix Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,095

Berd Hawk27 Wheels with Talon Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: Talon Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,295

Berd Hawk27 Wheels with I9 Solix Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: I9 Solix Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,095

Berd Hawk27 Wheels with Talon Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: Talon Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,095

Berd Hawk27 Wheels with Talon Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: Talon Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,295

Berd Hawk27 Wheels with I9 Solix Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: I9 Solix Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,295

Berd Hawk27 Wheels with I9 Solix Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: I9 Solix Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,095

Berd Hawk27 Wheels with Talon Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: Talon Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,295

Berd Hawk27 Wheels with I9 Solix Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: I9 Solix Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,095

Berd Hawk27 Wheels with Talon Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: Talon Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,295

Berd Wheels new offering, the Berd Hawk30 rim to the Berd Talon hub, with their new hook flange technology and dual ratchet hub internals. It's no secret that we have been huge fans of BERD Spokes here at Worldwide Cyclery, and with each iteration of the new product that feeling remains the same. Striking the balance between lightweight and reliability is often a hard thing to find and BERD has done it again with their Talon hub offering. With the hook flange made specifically for BERD spokes, it makes total sense to lace these spokes up like that. Takes out any hub modification you might have to do, the spoke has a straighter and more direct interface, and the hubs use a dual-star ratchet system where you know that will not fail on you. Pair that with the HAWK30 rim (made by the carbon fiber experts at We Are One) and you have an extremely well-rounded wheelset that we feel is perfect for cross-country use, downcountry, or trail riding. Specifications Wheel Size: 29"" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Berd Talon Hookflange Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2"" - 2.5"" Wheelset Weight: 1,444g Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,295

Berd Wheels new offering, the Berd Hawk30 rim to the Berd Talon hub, with their new hook flange technology and dual ratchet hub internals. It's no secret that we have been huge fans of BERD Spokes here at Worldwide Cyclery, and with each iteration of the new product that feeling remains the same. Striking the balance between lightweight and reliability is often a hard thing to find and BERD has done it again with their Talon hub offering. With the hook flange made specifically for BERD spokes, it makes total sense to lace these spokes up like that. Takes out any hub modification you might have to do, the spoke has a straighter and more direct interface, and the hubs use a dual-star ratchet system where you know that will not fail on you. Pair that with the HAWK30 rim (made by the carbon fiber experts at We Are One) and you have an extremely well-rounded wheelset that we feel is perfect for cross-country use, downcountry, or trail riding. Specifications Wheel Size: 29"" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Berd Talon Hookflange Freehub: SRAM XD Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2"" - 2.5"" Wheelset Weight: 1,444g Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,295

Berd Wheels new offering, the Berd Hawk30 rim to the Berd Talon hub, with their new hook flange technology and dual ratchet hub internals. It's no secret that we have been huge fans of BERD Spokes here at Worldwide Cyclery, and with each iteration of the new product that feeling remains the same. Striking the balance between lightweight and reliability is often a hard thing to find and BERD has done it again with their Talon hub offering. With the hook flange made specifically for BERD spokes, it makes total sense to lace these spokes up like that. Takes out any hub modification you might have to do, the spoke has a straighter and more direct interface, and the hubs use a dual-star ratchet system where you know that will not fail on you. Pair that with the HAWK30 rim (made by the carbon fiber experts at We Are One) and you have an extremely well-rounded wheelset that we feel is perfect for cross-country use, downcountry, or trail riding. Specifications Wheel Size: 29"" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Berd Talon Hookflange Freehub: SRAM XD Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2"" - 2.5"" Wheelset Weight: 1,444g Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,295

Berd Wheels new offering, the Berd Hawk27 rim to the Berd Talon hub, with their new hook flange technology and dual ratchet hub internals. It's no secret that we have been huge fans of BERD Spokes here at Worldwide Cyclery, and with each iteration of the new product that feeling remains the same. Striking the balance between lightweight and reliability is often a hard thing to find and BERD has done it again with their Talon hub offering. With the hook flange made specifically for BERD spokes, it makes total sense to lace these spokes up like that. Takes out any hub modification you might have to do, the spoke has a straighter and more direct interface, and the hubs use a dual-star ratchet system where you know that will not fail on you. Pair that with the HAWK27 rim (made by the carbon fiber experts at We Are One) and you have an extremely well-rounded wheelset that we feel is perfect for cross-country use, downcountry, or trail riding. Specifications Wheel Size: 29"" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Berd Talon Hookflange Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 34.5mm Internal Rim Width: 27mm Recommended Tire Width: 2.2"" - 2.5"" Wheelset Weight: 1,400g Lifetime Warranty BERD Hawk27 Wheelset

by BERD

—$2,295

Berd Wheels new offering, the Berd Hawk30 rim to the Berd Talon hub, with their new hook flange technology and dual ratchet hub internals. It's no secret that we have been huge fans of BERD Spokes here at Worldwide Cyclery, and with each iteration of the new product that feeling remains the same. Striking the balance between lightweight and reliability is often a hard thing to find and BERD has done it again with their Talon hub offering. With the hook flange made specifically for BERD spokes, it makes total sense to lace these spokes up like that. Takes out any hub modification you might have to do, the spoke has a straighter and more direct interface, and the hubs use a dual-star ratchet system where you know that will not fail on you. Pair that with the HAWK30 rim (made by the carbon fiber experts at We Are One) and you have an extremely well-rounded wheelset that we feel is perfect for cross-country use, downcountry, or trail riding. Specifications Wheel Size: 29"" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Berd Talon Hookflange Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2"" - 2.5"" Wheelset Weight: 1,444g Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,295

Berd Wheels new offering, the Berd Hawk27 rim to the Berd Talon hub, with their new hook flange technology and dual ratchet hub internals. It's no secret that we have been huge fans of BERD Spokes here at Worldwide Cyclery, and with each iteration of the new product that feeling remains the same. Striking the balance between lightweight and reliability is often a hard thing to find and BERD has done it again with their Talon hub offering. With the hook flange made specifically for BERD spokes, it makes total sense to lace these spokes up like that. Takes out any hub modification you might have to do, the spoke has a straighter and more direct interface, and the hubs use a dual-star ratchet system where you know that will not fail on you. Pair that with the HAWK27 rim (made by the carbon fiber experts at We Are One) and you have an extremely well-rounded wheelset that we feel is perfect for cross-country use, downcountry, or trail riding. Specifications Wheel Size: 29"" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Berd Talon Hookflange Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 34.5mm Internal Rim Width: 27mm Recommended Tire Width: 2.2"" - 2.5"" Wheelset Weight: 1,400g Lifetime Warranty BERD Hawk27 Wheelset

by BERD

—$2,295

Berd Wheels new offering, the Berd Hawk27 rim to the Berd Talon hub, with their new hook flange technology and dual ratchet hub internals. It's no secret that we have been huge fans of BERD Spokes here at Worldwide Cyclery, and with each iteration of the new product that feeling remains the same. Striking the balance between lightweight and reliability is often a hard thing to find and BERD has done it again with their Talon hub offering. With the hook flange made specifically for BERD spokes, it makes total sense to lace these spokes up like that. Takes out any hub modification you might have to do, the spoke has a straighter and more direct interface, and the hubs use a dual-star ratchet system where you know that will not fail on you. Pair that with the HAWK27 rim (made by the carbon fiber experts at We Are One) and you have an extremely well-rounded wheelset that we feel is perfect for cross-country use, downcountry, or trail riding. Specifications Wheel Size: 29"" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Berd Talon Hookflange Freehub: SRAM XD Hole Count: 28 Brake Type: Centerlock External Rim Width: 34.5mm Internal Rim Width: 27mm Recommended Tire Width: 2.2"" - 2.5"" Wheelset Weight: 1,400g Lifetime Warranty BERD Hawk27 Wheelset

by BERD

—$2,295

Berd Wheels new offering, the Berd Hawk27 rim to the Berd Talon hub, with their new hook flange technology and dual ratchet hub internals. It's no secret that we have been huge fans of BERD Spokes here at Worldwide Cyclery, and with each iteration of the new product that feeling remains the same. Striking the balance between lightweight and reliability is often a hard thing to find and BERD has done it again with their Talon hub offering. With the hook flange made specifically for BERD spokes, it makes total sense to lace these spokes up like that. Takes out any hub modification you might have to do, the spoke has a straighter and more direct interface, and the hubs use a dual-star ratchet system where you know that will not fail on you. Pair that with the HAWK27 rim (made by the carbon fiber experts at We Are One) and you have an extremely well-rounded wheelset that we feel is perfect for cross-country use, downcountry, or trail riding. Specifications Wheel Size: 29"" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Berd Talon Hookflange Freehub: SRAM XD Hole Count: 28 Brake Type: Centerlock External Rim Width: 34.5mm Internal Rim Width: 27mm Recommended Tire Width: 2.2"" - 2.5"" Wheelset Weight: 1,400g Lifetime Warranty BERD Hawk27 Wheelset

by BERD