—$81.95

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 3mm offset is designed for boost cranksets (52mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 30 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719025614

by Wolf Tooth

—$81.95

Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 52mm chainline / 3mm offset for boost spacing Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 32 Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719025522

by Wolf Tooth

—$81.95

Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 52mm chainline / 3mm offset for boost spacing Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 30 Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719025515

by Wolf Tooth

—$86.95

This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. Compatible only with Hyperglide+ 12-speed chains For use with Shimano XTR M9100 series cranksets Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention Prevents premature ring and chain wear that can come from non-optimized profiles Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount Shimano Drivetrain Speeds 12 keyword search Hyperglide Plus Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 32 Wolf Tooth Elliptical Shimano Hyperglide+ Direct Mount Chainrings Direct Mount Chainrings UPC: 810006800654

by Wolf Tooth

—$76.95

Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. Chainline is 49mm Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings Not compatible with 9 speed chains If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Round or Oval Round Tooth Count 32 Wolf Tooth RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719020923

by Wolf Tooth

—$76.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 3mm offset is designed for boost cranksets (52mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Round or Oval Round Tooth Count 28 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719025577

by Wolf Tooth

—$76.95

Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. Made from 7075 Aluminum for long life Not compatible with 9 speed chains Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Optimized for use with 10, 11, and 12 speed chains Chainline is 49mm Item Specifications Material Aluminum Offset 6 Defined Color Black Ring Position/TYPE Chain Retaining Single Ring Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Tooth Count 30 Direct Mount Type Direct Mount CINCH Round or Oval Round Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainline/Hub Compatibility 170/177 Hubs Chainline/Hub Compatibility 190/197 Hubs Wolf Tooth RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719020916

by Wolf Tooth

—$81.95

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 3mm offset is designed for Boost 52mm chainline Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 3 Round or Oval Oval Tooth Count 30 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006808117

by Wolf Tooth

—$79.95

These Wolf Tooth Elliptical Direct Mount Chainrings are designed to work with Cane Creek eeWings cranksets and SRAM direct mount cranksets with a 3-bolt interface. The proprietary Powertrac design has an ovality of 10% and a timing of 112 degrees after top dead center, providing benefits such as greater rear wheel traction. The tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain. Nickel plated chainrings are designed to be compatible with Cane Creek eeWings cranksets Compatible with Shimano 12-speed Hyperglide+ chains on bikes with boost and non-boost spacing Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Silver Direct Mount Type Direct Mount SRAM Drivetrain Speeds 12 Material Aluminum Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 32 Wolf Tooth Elliptical 3-Bolt Direct Mount Chainring for Hyperglide+ Chain Direct Mount Chainrings UPC: 810006801774

by Wolf Tooth

—$81.95

Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 49mm chainline / 6mm offset for standard spacing Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainline/Hub Compatibility 170/177 Hubs Chainline/Hub Compatibility 190/197 Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 30 Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719021814

by Wolf Tooth

—$79.95

This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. Compatible only with Hyperglide+ chains For use with Shimano XTR M9100 series cranksets Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention Prevents premature ring and chain wear that can come from non-optimized profiles Item Specifications Defined Color Black Direct Mount Type Direct Mount Shimano Drivetrain Speeds 12 Material Alloy Offset 3 Round or Oval Round Tooth Count 30 Wolf Tooth Shimano Hyperglide+ Direct Mount Chainrings Direct Mount Chainrings UPC: 810006800692

by Wolf Tooth

—$81.95

Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 49mm chainline / 6mm offset for standard spacing Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainline/Hub Compatibility 170/177 Hubs Chainline/Hub Compatibility 190/197 Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 32 Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719021821

by Wolf Tooth

—$81.95

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 6mm offset designed for use with cyclocross and road cranksets (47mm chainline) or GXP and long spindle BB30 cranksets (49mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 170/177 Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 28 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719022231

by Wolf Tooth

—$79.95

This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. Compatible only with Hyperglide+ chains For use with Shimano XTR M9100 series cranksets Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention Prevents premature ring and chain wear that can come from non-optimized profiles Item Specifications Defined Color Black Direct Mount Type Direct Mount Shimano Drivetrain Speeds 12 Material Alloy Offset 3 Round or Oval Round Tooth Count 32 Wolf Tooth Shimano Hyperglide+ Direct Mount Chainrings Direct Mount Chainrings UPC: 810006800708

by Wolf Tooth

—$76.95

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 3mm offset is designed for boost cranksets (52mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 34 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719026192

by Wolf Tooth

—$84.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Round or Oval Round Tooth Count 40 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006801156

by Wolf Tooth

—$81.95

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 6mm offset designed for use with cyclocross and road cranksets (47mm chainline) or GXP and long spindle BB30 cranksets (49mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 170/177 Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 32 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719021524

by Wolf Tooth

—$81.95

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 3mm offset is designed for boost cranksets (52mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 3 Round or Oval Oval Tooth Count 32 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006808124

by Wolf Tooth

—$81.95

Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 49mm chainline / 6mm offset for standard spacing Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainline/Hub Compatibility 170/177 Hubs Chainline/Hub Compatibility 190/197 Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 28 Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719022224

by Wolf Tooth

—$86.95

This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Compatible only with Hyperglide+ 12-speed chains For use with any RaceFace CINCH crankset Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention Prevents premature ring and chain wear that can come from non-optimized profiles Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 12 keyword search Hyperglide Plus Material Alloy Offset 3 Round or Oval Oval Tooth Count 32 Wolf Tooth Elliptical RaceFace CINCH Hyperglide+ Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 810006800647

by Wolf Tooth

—$76.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 6mm offset designed for use with cyclocross and road cranksets (47mm chainline) or GXP and long spindle BB30 cranksets (49mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Round or Oval Round Tooth Count 26 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719020688

by Wolf Tooth

—$86.95

This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Compatible only with Hyperglide+ 12-speed chains For use with any RaceFace CINCH crankset Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention Prevents premature ring and chain wear that can come from non-optimized profiles Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 12 keyword search Hyperglide Plus Material Alloy Offset 3 Round or Oval Oval Tooth Count 30 Wolf Tooth Elliptical RaceFace CINCH Hyperglide+ Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 810006800630

by Wolf Tooth

—$81.95

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 6mm offset designed for use with cyclocross and road cranksets (47mm chainline) or GXP and long spindle BB30 cranksets (49mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 170/177 Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 30 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719021517

by Wolf Tooth

—$76.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 6mm offset designed for use with cyclocross and road cranksets (47mm chainline) or GXP and long spindle BB30 cranksets (49mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Round or Oval Round Tooth Count 28 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719020695

by Wolf Tooth

—$76.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 0mm offset is designed for BB30 short spindle cranks (49mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 0 Round or Oval Round Tooth Count 30 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006807905

by Wolf Tooth

—$76.95

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 0mm offset is designed for BB30 short spindle cranks (49mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 0 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 32 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719021951

by Wolf Tooth

—$76.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 6mm offset designed for use with cyclocross and road cranksets (47mm chainline) or GXP and long spindle BB30 cranksets (49mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Round or Oval Round Tooth Count 32 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719020718

by Wolf Tooth

—$76.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 3mm offset is designed for boost cranksets (52mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 3 Round or Oval Round Tooth Count 28 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006808230

by Wolf Tooth

—$81.95

Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 52mm chainline / 3mm offset for boost spacing Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 28 Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719025508

by Wolf Tooth

—$84.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Compatible with 12-speed SRAM Flattop chain Not compatible with 12-speed Shimano Hyperglide + chains Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Round or Oval Round Tooth Count 42 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006801163

by Wolf Tooth

—$76.95

This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. Compatible only with Hyperglide+ 12-speed chains For use with any RaceFace CINCH crankset Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention Prevents premature ring and chain wear that can come from non-optimized profiles Item Specifications Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 12 keyword search Hyperglide Plus Material Alloy Offset 3 Round or Oval Round Tooth Count 30 Wolf Tooth RaceFace/Easton CINCH Hyperglide+ Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 810006800661

by Wolf Tooth

—$76.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 3mm offset is designed for boost cranksets (52mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 3 Round or Oval Round Tooth Count 32 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006808254

by Wolf Tooth

—$84.95

Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Round or Oval Round Tooth Count 38 Wolf Tooth RaceFace / Easton CINCH Direct Mount Road Chainrings Direct Mount Chainrings UPC: 810006801330

by Wolf Tooth

—$76.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 6mm offset designed for use with cyclocross and road cranksets (47mm chainline) or GXP and long spindle BB30 cranksets (49mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Round or Oval Round Tooth Count 30 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719020701

by Wolf Tooth

—$76.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 3mm offset is designed for boost cranksets (52mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Round or Oval Round Tooth Count 34 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719026215

by Wolf Tooth

—$76.95

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 0mm offset is designed for BB30 short spindle cranks (49mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 0 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 30 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719021944

by Wolf Tooth

—$84.95

Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Round or Oval Round Tooth Count 42 Wolf Tooth RaceFace / Easton CINCH Direct Mount Road Chainrings Direct Mount Chainrings UPC: 810006801354

by Wolf Tooth

—$76.95

This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. Compatible only with Hyperglide+ 12-speed chains For use with any RaceFace CINCH crankset Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention Prevents premature ring and chain wear that can come from non-optimized profiles Item Specifications Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 12 keyword search Hyperglide Plus Material Alloy Offset 3 Round or Oval Round Tooth Count 32 Wolf Tooth RaceFace/Easton CINCH Hyperglide+ Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 810006800678

by Wolf Tooth

—$81.95

These Wolf Tooth Elliptical Direct Mount Chainrings are designed to work with Cane Creek eeWings cranksets and SRAM direct mount cranksets with a 3-bolt interface. The proprietary Powertrac design has an ovality of 10% and a timing of 112 degrees after top dead center, providing benefits such as greater rear wheel traction. The tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain. 7075-T6 aluminum Drop Stop ST Compatible with Shimano 12-speed Hyperglide+ chains on bikes with boost and non-boost spacing Designed to be compatible with Cane Creek eeWings cranksets Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention Prevents premature ring and chain wear that can come from non-optimized profiles Item Specifications Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 12 Material Aluminum Offset 3 Round or Oval Oval Tooth Count 30 Wolf Tooth Elliptical 3-Bolt Direct Mount Chainring for Hyperglide+ Chain Direct Mount Chainrings UPC: 810006806373

by Wolf Tooth

—$76.95

Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. Chainline is 49mm Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings Not compatible with 9 speed chains If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Round or Oval Round Tooth Count 34 Wolf Tooth RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719020930

by Wolf Tooth

—$49.95

Wolf Tooth's CAMO is all about choice - this premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention.. Only compatible with Wolf Tooth CAMO spiders. Requires the use of a CAMO spider Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Chainring BCD Wolf Tooth CAMO Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 32 Wolf Tooth CAMO Aluminum Round Chainrings Direct Mount Chainrings UPC: 812719023511

by Wolf Tooth

—$84.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Round or Oval Round Tooth Count 38 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006801149

by Wolf Tooth

—$84.95

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. Compatible with 12-speed SRAM Flattop chain Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 141/148 Boost Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainline/Hub Compatibility 170/177 Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 42 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006801194

by Wolf Tooth

—$76.95

Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. Chainline is 49mm Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings Not compatible with 9 speed chains If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Round or Oval Round Tooth Count 28 Wolf Tooth RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719020893

by Wolf Tooth

—$81.95

Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 49mm chainline / 6mm offset for standard spacing Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainline/Hub Compatibility 170/177 Hubs Chainline/Hub Compatibility 190/197 Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 34 Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719021838

by Wolf Tooth

—$76.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 3mm offset is designed for boost cranksets (52mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 3 Round or Oval Round Tooth Count 30 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006808247

by Wolf Tooth

—$76.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 0mm offset is designed for BB30 short spindle cranks (49mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 0 Round or Oval Round Tooth Count 32 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719020299

by Wolf Tooth

—$79.95

These Wolf Tooth Elliptical direct mount rings are designed for SRAM cranks with 8-bolt mounting. This chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings Compatible with SRAM AXS cranksets and other cranks that use the 8-bolt mounting Includes set of 8 custom T20 stainless steel bolts Made from 7075-T6 aluminum for long life Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 3 Round or Oval Oval Tooth Count 32 Wolf Tooth SRAM Elliptical 8-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006808605

by Wolf Tooth

—$76.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 3mm offset is designed for boost cranksets (52mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 3 Round or Oval Round Tooth Count 36 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006808278

by Wolf Tooth

—$84.95

Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Round or Oval Round Tooth Count 40 Wolf Tooth RaceFace / Easton CINCH Direct Mount Road Chainrings Direct Mount Chainrings UPC: 810006801347

by Wolf Tooth