—$50

Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.Compatible with 240S Center Lock "Fifteen" front hubs, 240S Center Lock Straight-Pull front hubs, 2014 15x100mm white 180 front hubs and 2016 RC Spline wheels (black hubs) Item Specifications Front Axle Type 12mm Thru x 100mm DT Swiss Front Axle Conversion Kits Front Axle Conversion Kit EAN: 7630033835244

by DT Swiss

—$85.30

Replacement freehub bodies for hubs and wheels that utilize the DT Swiss 3-Pawl system.End Cap Included Item Specifications Cassette Body Type Shimano HG Material Aluminum Material Steel Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 DT Swiss 3-Pawl Freehub Body Freehub Body EAN: 7630024381965

by DT Swiss

—$24.99

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. Double Butted: 2.0/1.8/2.0 Compatible with straight pull hubs only One 264mm spoke = 5.9g Nipples sold separately Item Specifications Color Black Defined Color Black Length 300 Spoke Interface Straight Pull Spoke Profile Double Butted Thread Diameter 2.0 DT Swiss Competition Straight Pull Black Spokes Spoke, Bulk EAN: 7613052035284

by DT Swiss

—$49.95

The Better Boost Adaptor Kits allow you to upgrade your existing 15x100mm front wheel to the Boost 15x110mm fork standard. Even better, this kit maintains the existing dish of the wheel by shifting the brake rotor outboard. Compatible with all Hope Pro 2, Pro 2 Evo, and Pro 4 mountain bike front hubs with 6-bolt disc mounts Consists of two precisely machined end caps, a brake spacer with bolts Does not require wheel re-dishing MRP Better Boost Adaptor Kits Front Axle Conversion Kit UPC: 702430174534

by MRP

—$40.90

DT Swiss RWS Thru Bolt Rear Quick Release Skewers. Up to 50% more clamping force than standard quick releases Lever can be placed in an ideal Ratcheting system tightens skewers with turns rather than cam Item Specifications Color Black Weight 65g Rear Axle Type 12mm Thru-axle DT Swiss RWS Rear Thru Axle Thru Axle EAN: 7630024380272

by DT Swiss

—$12.75

ABI Standard Design Cartridge Bearings. 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals If the bearing you are replacing is not marked with a manufacturer number, measure it and compare to specifications listed Item Specifications Bearing I.D. 25mm Bearing O.D. 37mm Bearing Thickness 7mm Manufacturer Number 6805 Enduro Standard Cartridge Bearing Cartridge Bearing UPC: 185843000155

by Enduro

—$23.99

Thru-Axle hub adapters allow the use of 100 mm front thru-axle hubs in 100 mm QR forks. For use with 12 x 100 mm front hubs Allows the use of modern thru-axle wheels in forks designed for quick-release compatible hubs 100 mm front hub spacing only CNC-machined AL-6061 Compatible with most thru axle hubs-verify with hub manufacturer Problem Solvers Thru-Axle/QR Adaptor Front Axle Conversion Kit UPC: 708752201385

by Problem Solvers

—$50

Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control. Fits 15mm Boost-spaced front hubs as well as 15x100mm Centerlock hubs Does not fit 240s 15x100mm 6-bolt hubs(Oversized) Allows for easy installation on Rock Shox Torque Cap compatible forks DT Swiss Torque Caps Other Hub Part EAN: 7630033858977

by DT Swiss

—$24.54

The DT Squorx Pro Head nipple combines ease of use, lightweight and optimum performance in a single product. The Torx head facilitates wheelbuilds with bladed spokes while the spherical contact area perfectly aligns the nipple with the spoke. The square interface finally allows for easy truing with standard tools when the tire is mounted.32 nipples weigh approximately 14g Item Specifications Color Silver Defined Color Silver Length 15 Material Alloy Spoke Diameter 2.0 DT Swiss Squorx Spoke Nipples Spoke Nipple EAN: 7630024368409

by DT Swiss

—$50

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted. These end caps are specific to 11-speed road freehub bodies/cassettes and are not compatible with 9/10 speed 12x142 mountain hubs Compatible with classic flanged hubs DT 12 x 142mm and 12 x 148mm rear hubs use the same end caps NOTE: Not SCS compatible End caps do not convert non-Boost hubs to Boost 148mm spacing. DT 142x12mm and 148x12mm hubs simply share the same end caps Item Specifications Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 Rear Hub Spacing (mm) 148 DT Swiss Rear Axle Conversion Kits Rear Axle Conversion Kit EAN: 7630024367082

by DT Swiss

—$22

Front end cap conversion kits for Neo and Neo Ultimate Increases the contact area between wheel and fork to provide a stronger and stiffer interface; must be used with a Rock Shox Torque Cap fork SealLock end caps feature a low friction U-cup seal that snaps into place Not compatible with OS or CenterLock hubs Stan's No Tubes Neo Front End Caps Front Axle Conversion Kit UPC: 847746019480

by Stan's No Tubes

—$24.99

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. Double Butted: 2.0/1.8/2.0 Compatible with straight pull hubs only One 264mm spoke = 5.9g Nipples sold separately Item Specifications Color Black Defined Color Black Length 298 Spoke Interface Straight Pull Spoke Profile Double Butted Thread Diameter 2.0 DT Swiss Competition Straight Pull Black Spokes Spoke, Bulk EAN: 7613052035260

by DT Swiss

—$28

Industry Nine Spoke Kit. Item Specifications Defined Color Black Industry Nine Spoke Kit Spoke Kit

by Industry Nine

—$13.85

Industry Nine cartridge bearings are OE replacement bearings. Item Specifications Bearing I.D. (mm) 17 Bearing O.D. (mm) 30 Manufacturer Number 61903 Thickness 7 Industry Nine Hub Bearing Cartridge Bearing

by Industry Nine

—$83.20

Original equipment freehub bodies to fit SRAM hubs and wheels. Item Specifications Cassette Body Type SRAM XD Material Aluminum SRAM Freehub Bodies Freehub Body UPC: 710845742477

by SRAM

—$40.90

DT Swiss RWS Thru Bolt Rear Quick Release Skewers. Up to 50% more clamping force than standard quick releases Lever can be placed in an ideal Ratcheting system tightens skewers with turns rather than cam Item Specifications Color Black Weight 70g Rear Axle Type 10mm Thru DT Swiss RWS Rear Thru Bolt Rear QR Skewer EAN: 7630013901723

by DT Swiss

—$17.04

MT200B Rear Quick Release Shimano MT200B Rear QR Skewer UPC: 192790387734

by Shimano

—$11.99

Enduro Max Cartridge bearings.90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals, full complement of bearings, up to 45% increased load capacity Item Specifications Bearing I.D. 12mm Bearing O.D. 24mm Bearing Thickness 6mm Manufacturer Number 8901 Enduro MAX-Type Cartridge Bearings Cartridge Bearing UPC: 185843000124

by Enduro

—$19

Front Axle Conversion Caps for SRAM hubs. SRAM Front Axle Conversion Caps Front Axle Conversion Kit UPC: 710845739224

by SRAM

—$24.50

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. Double Butted: 2.0/1.8/2.0 Compatible with straight pull hubs only One 264mm spoke = 5.9g Nipples sold separately Item Specifications Color Black Defined Color Black Length 286 Spoke Interface Straight Pull Spoke Profile Double Butted Thread Diameter 2.0 DT Swiss Competition Straight Pull Black Spokes Spoke, Bulk EAN: 7630024311023

by DT Swiss

—$50

QR Thru-axles for Fox suspension forks. FOX QR Thru-Axles Thru Axle UPC: 611056143315

by FOX

—$108

Zipp Freehub Bodies Item Specifications Cassette Body Type Shimano HG 11/12-Speed Road Zipp Freehub Bodies Freehub Body UPC: 710845839900

by Zipp

—$775

Confident and capable of cleaning the A-line yet budget friendly to save up for a season of bucket list rides, the 1/1 hub stays true to the performance heritage of Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering, 1/1 takes a no-nonsense approach in welcoming riders to Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering S is for steel, in this case the spokes. A high performance 28h hub and conventional J-bend spokes 2-Year Warranty coverage against defects on your Industry Nine wheelset or Classic hubset Item Specifications Cassette Body Type Shimano Micro Spline Defined Color List Black Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / road / 29" Rear Axle 12mm Thru x 148mm Rim Width (Internal) 30.5 Tire Type Tubeless Ready Wheel Size 29" Industry Nine 1/1 Enduro S Wheelset Wheelset UPC: 810098986069

by Industry Nine

—$765

Confident and capable of cleaning the A-line yet budget friendly to save up for a season of bucket list rides, the 1/1 hub stays true to the performance heritage of Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering, 1/1 takes a no-nonsense approach in welcoming riders to Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering S is for steel, in this case the spokes. A high performance 28h hub and conventional J-bend spokes 2-Year Warranty coverage against defects on your Industry Nine wheelset or Classic hubset Item Specifications Cassette Body Type SRAM XD 11/12 Speed Defined Color List Black Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 584 / 650b / 27.5" Rear Axle 12mm Thru x 148mm Rim Width (Internal) 30.5 Tire Type Tubeless Ready Wheel Size 27.5" Industry Nine 1/1 Enduro S Wheelset Wheelset UPC: 810098986083

by Industry Nine

—$39.95

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it.Made in Minnesota to aerospace standards Item Specifications Axle Diameter (mm) 12 Color Black Overall Length (mm) 180 Thread Length (mm) 17 Thread Pitch 1.75 Weight 43 Wolf Tooth Rear Thru Axle Thru Axle UPC: 812719029155

by Wolf Tooth

—$30

Industry Nine End Cap Kits for Torch Series Wheels The front hub is compatible with QR, 9mm thru bolt, 15mm, and 20mm (x110mm) by swapping endcaps The front hub utilizes o-ring seals to protect bearings Kit includes 2 axle conversion end caps Does not include skewers Item Specifications Fits Torch Industry Nine Torch Classic Mountain End Cap Conversion Kit Front Axle Conversion Kit UPC: 810098984621

by Industry Nine

—$26

Stan's Neo hub end caps. Stan's No Tubes Neo Rear End Caps Rear Axle Conversion Kit UPC: 847746012498

by Stan's No Tubes

—$21.70

Bearings for maintaining and rebuilding DT Swiss hubs. Genuine DT replacement steel bearings; 240s quality Replacement bearing for rear driveside on Spline 1200, 2nd generation 1501 and DiCut disc wheels Item Specifications Bearing I.D. (mm) 15 Bearing O.D. (mm) 26 Manufacturer Number 1526 Material Steel Thickness 7 DT Swiss Cartridge Bearings Cartridge Bearing EAN: 7630024374486

by DT Swiss

—$22

Front end cap conversion kits for Neo and Neo Ultimate SealLock end caps feature a low friction U-cup seal that snaps into place Not compatible with OS or CenterLock hubs Stan's No Tubes Neo Front End Caps Front Axle Conversion Kit UPC: 847746012436

by Stan's No Tubes

—$38

Axle set includes axle and end caps.Does not convert a hub or wheel to a different axle diameter or length SRAM Axle Kits Axle Set UPC: 710845774393

by SRAM

—$44.95

The Better Boost Adaptor Kits allow you to upgrade your existing 15x100mm front wheel to the Boost 15x110mm fork standard. Even better, this kit maintains the existing dish of the wheel by shifting the brake rotor outboard. Consists of two precisely machined end caps, a brake spacer with bolts Does not require wheel re-dishing MRP Better Boost Adaptor Kits Front Axle Conversion Kit UPC: 702430171977

by MRP

—$21.70

ABEC-3 Sealed Bearing OD: 37mm / ID: 24mm / Width: 7mm Sealed with LLB type silicone seals Includes 2 bearings Item Specifications Bearing I.D. (mm) 24 Bearing O.D. (mm) 37 Manufacturer Number SB-24X37 Thickness 7 Wheels Manufacturing ABEC-3 Cartridge Bearing UPC: 836572009987

by Wheels Manufacturing

—$8.99

MAX type bearings are designed specifically for suspension pivots. Using a special design where the maximum number of balls are inserted into the bearing, they have more load capacity than standard radial bearings The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with suspension pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside. 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals, full complement of bearings, up to 45% increased load capacity Installed with shield facing out 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals, full complement of bearings, up to 45% increased load capacity Item Specifications Bearing I.D. (mm) 15 Bearing O.D. (mm) 28 Manufacturer Number 7902 1ZS MAX Material Steel Thickness 7 Enduro MAX-Type Cartridge Bearings Cartridge Bearing UPC: 810191019091

by Enduro

—$460

Made in Asheville, NC, Torch Hydra hubs feature low weight and 690 points of engagement with .52 degrees between engagements making them one of the highest engaging hubs on the market. The hubs are offered in a wide range of colors, as well as HG, XD, and Micro Splined freehub bodies. From the outside, the new Hydra hubs look identical to the previous generation; the real magic happens inside with the upgraded Hydra drive mechanism. Featuring the new Hydra internals, designed around a traditional flanged hub Angled flanges for lower spoke stress Hydra freehub mechanism improves over previous Torch hub internals with multiple heads engaging for strength and quicker engagement 6-pawl, 6-phase, 115-tooth drive ring with .52 deg between engagement points, 690 amazing points of engaging Item Specifications Flange Diameter Left 58mm Flange Diameter Right 60mm Hub Drilling 32 Spoke Interface J-Bend Cassette Body Type SRAM XD Skewer Included No Industry Nine Hydra Classic Rear Hub Rear Hub UPC: 810098980043

by Industry Nine

—$765

Confident and capable of cleaning the A-line yet budget friendly to save up for a season of bucket list rides, the 1/1 hub stays true to the performance heritage of Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering, 1/1 takes a no-nonsense approach in welcoming riders to Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering S is for steel, in this case the spokes. A high performance 28h hub and conventional J-bend spokes 2-Year Warranty coverage against defects on your Industry Nine wheelset or Classic hubset Item Specifications Cassette Body Type Shimano Dynasys 11 Speed Mountain Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / road / 29" Rear Axle 12mm Thru x 148mm Rim Width (Internal) 30.5 Tire Type Tubeless Ready Wheel Size 29" Industry Nine 1/1 Enduro S Wheelset Wheelset UPC: 810098986502

by Industry Nine

—$50

Thru-Axles for 36mm Fox Suspension. FOX 36 Thru-Axles Thru Axle UPC: 611056147283

by FOX

—$109

Quality Wheels Mountain Disc Rear Wheels Item Specifications Color Black Weight 1195g Hub Drilling 32spokes Rear Axle Type 10x1 Cassette Body Type Shimano 9/10/SRAM Hub/Brake Compatibility 6-Bolt Disc Valve Presta ISO Diameter 622 / road / 29" Valve Length Short 32-40mm Wheel Size 29er Tire Type Clincher Rear Wheel Type Mountain Rear Hub Spacing 135mm Spoke Info DT Champion Rim Sun SR25 Skewer Included Yes Rim Material Alloy Defined Color Black Quality Wheels Value Double Wall Series Disc Rear Wheel Rear Wheel UPC: 708752056886

by Quality Wheels

—$18.56

Through the spherical contact surface, DT Pro Head nipples align automatically with the angle of the spoke, which leads to a homogeneous power transmission. The special shape of the head prevents the nipple of tilting in the rim base, which is a great advantage for wheel building. Can be used in place of alloy Squorx Pro Head nipples when building DT rims that require Prohead nipples and washers (PHR washer is still required) 32 nipples weigh approximately 30 grams Item Specifications Color Black Defined Color Black Length 12 Material Brass Spoke Diameter 2.0 DT Swiss ProHead Spoke Nipples Spoke Nipple EAN: 7613052164939

by DT Swiss

—$17.91

The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy. Item Specifications Rim Strip Width (mm) 28 Muc-Off Rim Tape Rim Strips and Tape EAN: 5037835204704

by Muc-Off

—$155

Perfect for Mountain, Gravel, and All-Road commuting, these tubeless-ready do-it-all wheels are ready to take you wherever you want to go Minimum tire width 1.35" / 28c 2.7" maximum tire width 22mm inner width Tubeless ready Item Specifications Color Black Hub Drilling 32 Cassette Body Type Shimano/SRAM 8, 9, 10 Speed Rim Depth 20.5 ISO Diameter 584 / 650b / 27.5" Valve Length Medium Presta Valve 41-55mm Wheel Size 27.5" Tire Type Tubeless Ready Clincher Spoke Info DT Factory Rim DT 533d Skewer Included Yes Rim Joint Pinned Defined Color Black Spoke Interface J-Bend Nipple Material Brass Hub Color Black Rear Axle QR x 135mm Rim Width (External) 28 Rim Material Alloy Hub/Brake Compatibility Center-Lock Disc Spoke Profile Round Nipple Color Black Eyelets Single Rim Width (Internal) 22 Spoke Color Black Rim Color Black Hub Model Deore M610 Quality Wheels DT 533D Disc Rear Wheel Rear Wheel UPC: 708752214347

by Quality Wheels

—$170.80

The Ratchet LN freehub body upgrade kit makes it possible to convert DT Swiss 3-Pawl hubs to the beloved Ratchet System. With just a few simple steps, it is possible to incorporate the benefits of Ratchet Systems, such as the outstanding reliability and adaptability of the engagement angle.Ratchet LN freehub bodies have a freehub system seal designed into it, allowing the conversion of 3-Pawl driven hubs to the Ratchet LN. It's an ideal upgrade for hubs such as the 360 and 370 series. Item Specifications Cassette Body Type SRAM XD Material Aluminum DT Swiss Ratchet LN Freehub Body Upgrade Kit Freehub Body EAN: 7613052299112

by DT Swiss

—$45

The Maxle Stealth offers a light, low profile, tooled alternative to Maxle Lite. 34g lighter than Maxle Lite Easy Allen wrench installation Item Specifications Axle Diameter (mm) 12 Color Black Over Locknut (mm) 100 Overall Length (mm) 125 Thread Length (mm) 12 Thread Pitch 12 x 1.5 Weight 37 RockShox Maxle Stealth Front Thru Axle Thru Axle UPC: 710845768187

by RockShox

—$157.90

The EX 511 rim was designed to meet the needs of riders that want to ride burlier terrain, faster and faster. It comes with all the technology that has delivered many EWS wins, and packs it in a 30 mm wide profile. 2.0 silver alloy Prolock Squorx Pro Head nipples and PHR washers included The wheel must be built with the supplied PHR washers and Pro Head nipples. The PHR washer must be positioned between the nipple and rim and fit correctly within the radius of the rim. DT Swiss recommends that the contact area between the nipple and PHR washer is greased ERD and weights shown include PHR washers,Intended use is All Mountain, Enduro and Freeride/Downhill Item Specifications Brake Track None Color Black Defined Color Black Hub Drilling 32 ISO Diameter 584 / 650b / 27.5" Manufacturer Spec ERD (mm) 563 Rim Center Offset (mm) 0 Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Valve Presta Weight 550 Wheel Size 27.5" DT Swiss EX 511 Rims EAN: 7630033861830

by DT Swiss

—$54.90

The patented RWS wheel mounting system from DT Swiss is a stiffer, safer and more user friendly option than conventional quick releases. Ratcheting system tightens skewers with turns rather than using a cam Lever can be rotated into an ideal position after tightening Alloy axle and lever Item Specifications Axle Diameter (mm) 12 Color Black Over Locknut (mm) 142 Overall Length (mm) 171 Thread Length (mm) 13 Thread Pitch 1.5 DT Swiss RWS Rear Thru Axle Thru Axle EAN: 7613052055039

by DT Swiss

—$40.90

The patented RWS wheel mounting system from DT Swiss is a stiffer, safer and more user friendly option than conventional quick releases. Ratcheting system tightens skewers with turns rather than using a cam Lever can be rotated into an ideal position after tightening Alloy axle and lever Item Specifications Axle Diameter (mm) 12 Color Black Over Locknut (mm) 142 Overall Length (mm) 171 Thread Length (mm) 11.5 Thread Pitch 1.5 Weight 65 DT Swiss RWS Rear Thru Axle Thru Axle EAN: 7630024352194

by DT Swiss

—$50

Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control. Fits Black 180 front hubs as well as the following wheels: 2016+ Spline 1501, XMC 1200 and RR21 Dicut Disc Allows for easy installation on Rock Shox Torque Cap compatible forks DT Swiss Torque Caps Other Hub Part EAN: 7630033858984

by DT Swiss

—$40.90

The patented RWS wheel mounting system from DT Swiss is a stiffer, safer and more user friendly option than conventional quick releases. Compatible with RockShox Bluto Forks Ratcheting system tightens skewers with turns rather than cam Lever can be rotated into an ideal position after tightening Alloy axle and lever Item Specifications Axle Diameter (mm) 15 Color Black Over Locknut (mm) 150 Overall Length (mm) 198 Thread Length (mm) 10 Thread Pitch 1.5 DT Swiss RWS Front Thru Axle Thru Axle EAN: 7630033837712

by DT Swiss

—$40.90

The RWS for road or MTB wheels with its steel axle and alloy lever is strong and reliable. It will always give the rider a strong connection between wheel and frame or fork, ensuring a safe and precise ride at all times. The patented wheel mounting system from DT Swiss is stiffer, safer and more user friendly than conventional quick releases. 100% disc brake compatible. Ratcheting system tightens skewers with turns rather than using a cam Up to 50% more clamping force than standard quick releases Lever can be rotated into an ideal position after tightening Item Specifications Weight 55 DT Swiss RWS Rear Steel QR Skewer Rear QR Skewer EAN: 7630024323385

by DT Swiss

—$157.90

The EX 511 rim was designed to meet the needs of riders that want to ride burlier terrain, faster and faster. It comes with all the technology that has delivered many EWS wins, and packs it in a 30 mm wide profile. 2.0 silver alloy Prolock Squorx Pro Head nipples and PHR washers included The wheel must be built with the supplied PHR washers and Pro Head nipples. The PHR washer must be positioned between the nipple and rim and fit correctly within the radius of the rim. DT Swiss recommends that the contact area between the nipple and PHR washer is greased ERD and weights shown include PHR washers,Intended use is All Mountain, Enduro and Freeride/Downhill Item Specifications Brake Track None Color Black Defined Color Black Hub Drilling 28 ISO Diameter 584 / 650b / 27.5" Manufacturer Spec ERD (mm) 563 Rim Center Offset (mm) 0 Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Valve Presta Weight 550 Wheel Size 27.5" DT Swiss EX 511 Rims EAN: 7630033861816

by DT Swiss

—$24.50

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. Double Butted: 2.0/1.8/2.0 Compatible with straight pull hubs only One 264mm spoke = 5.9g Nipples sold separately Item Specifications Color Black Defined Color Black Length 296 Spoke Interface Straight Pull Spoke Profile Double Butted Thread Diameter 2.0 DT Swiss Competition Straight Pull Black Spokes Spoke, Bulk EAN: 7613052035246

by DT Swiss