Wheels / Hubs / Rims

—$693.39

Increase the agility of lightweight eMTBs using this specific aluminum wheelset. Aligned to the purpose of lightweight eMTBs, the HX 1700 SPLINE LS aim for the right balance between lightness and resistance for more dynamic handling. The 350 hubs have been redesigned for eMTB to offer more resistance to the acceleration and braking forces. In addition, the spokes have been modified to increase their strength without drastically increasing the weight. These wheels are ready to be ridden on the fastest lines in technical sections and to carve into fast and tight turns. Built to provide enhanced riding agility for light eMTBs Agility-focused aluminum rims are light, yet resistant; helping to enable agile riding New Hybrid-specific spokes for an advanced riding experience, combining resistance and lightweight Built with the 350 Hybrid LS hub for enhanced reliability and contained weight. The well-known Ratchet System 24 makes the load distribution uniform, providing lasting durability Item Specifications Cassette Body Type Shimano HG Color Black Defined Color Black Designed for ebike Yes Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 584 / 650b / 27.5" Rear Axle 12mm Thru x 148mm Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 27.5" DT Swiss HX 1700 Spline LS Rear Wheel Rear Wheel EAN: 7613052340814 MPN: WHX1700THDSSA18396

by DT Swiss

—$1,196.52

The HXC 1501 SPLINE ONE are extra lightweight carbon eMTB wheels are engineered for riders looking for outstanding agility. Thanks to the low weight carbon rims, riders benefit from increased agility and dynamism when going uphill and downhill, while withstanding the increased torques of eMTBs. The spokes were designed with specific diameters to align light weight and resistance. Inside the 240 hub, oversized bearings support the additional loads of eMTBs. Each component has been designed with the specific aim of delivering advanced agility to find flow and fun on the trails. Built to provide ultimate riding agility for light eMTBs Perfect balance between low weight and resistance, ready to go faster in the ups and the downs Hybrid-specific spoke design provides an advanced riding experience, combining resistance and lightweight Ratchet EXP OS, optimized for the requirements of an eMTB, with a bigger threaded ring for direct acceleration through a torque-resistant freehub system Item Specifications Cassette Body Type Shimano Micro Spline Color Black Defined Color Black Designed for ebike Yes Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 148mm Rim Material Carbon Rim Width (Internal) 30 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 29" DT Swiss HXC 1501 Spline ONE Rear Wheel Rear Wheel EAN: 7613052340692 MPN: WHXC150TFD3CA18296

by DT Swiss

—$225

Upgrading to a set of quality tubeless wheels is the number one way to improve the ride of your XC or Gravel bike. Tubeless offers more comfort and control with less rolling resistance, and when it comes to tubeless, nothing beats the easy inflation and performance of Stan's patented Bead Socket Technology. First introduced over 15 years ago, the original Crest rim design with BST helped launch the tubeless revolution. Today's Crest S2 wheels offer quick and easy inflation, the legendary airtight seal, and a 25mm width that offers incredible stability for 40mm to 2.3" Gravel and XC tires. 32 Spokes 25mm rim width optimized for Gravel and XC tires up to 2.3 6061 aluminum with sleeved joint and stainless steel rim eyelets Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability E-sync hubs feature Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs Connection program includes 3-year E-sync hub warranty, 3-year S2 rim warranty, 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice Tubeless tape installed, requires additional valve stems Item Specifications Color Black Defined Color Black Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rim Material Alloy Rim Width (Internal) 25 Tire Type Tubeless Ready Valve Presta Wheel Size 29" Stan's No Tubes Crest S2 Front Wheel Front Wheel UPC: 847746060246 MPN: DWC290001

by Stan's No Tubes

—$441.90

When motor assistance and leg power meet, the range of terrain a bike can conquer grows almost exponentially. The H 1900 SPLINE is designed for this, now upgraded with the famous DT Swiss Ratchet technology. The Ratchet LN system distributes the combined forces from the rider and the motor over a larger area than the previous pawl freehub systems, increasing the systems' durability thanks to lower load peaks. The 370 hub enables full power transmission to the ground with reinforced hybrid spokes laced to a resistant aluminum rim, available in two inner widths. Aluminum rim, Hooked / Crotchet tubeless ready DT Hybrid 1 spokes are reinforced and increase the lateral and torsional stiffness of the wheel 370 Hub with Ratchet LN 18pt Includes Tubeless Valve and Tape Item Specifications Cassette Body Type Shimano HG Defined Color Black Designed for ebike Yes Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" keyword search electric bikes, electric bicycle, e-bike, e-bikes keyword search hybrid Rear Axle 12mm Thru x 148mm Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 29" DT Swiss H 1900 Spline 30 Rear Wheel Rear Wheel EAN: 7613052349572 MPN: W0H1900TFDSSA18347

by DT Swiss

—$543

The Flow MK4 wheelset lets you do more. Corner harder, send it further, and carry more speed through any section of trail. Today's Flow MK4 gives you the control you need to push boundaries. Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires Durable 6069 aluminum with welded joint and reinforced spoke bed BST-Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel build M-pulse ultra-low drag magnetic pawl adjustable hubs with 1.66 deg engagement Enduro bearings with double-row freehub bearing Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability Includes tubeless tape and presta valves Item Specifications Cassette Body Type Shimano HG 11/12-Speed Road Color Black Defined Color Black Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 148mm Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Valve Presta Wheel Size 29" Stan's No Tubes Flow MK4 Rear Wheel Rear Wheel UPC: 847746059974 MPN: DWF490007

by Stan's No Tubes

—$543

The Flow MK4 wheelset lets you do more. Corner harder, send it further, and carry more speed through any section of trail. Today's Flow MK4 gives you the control you need to push boundaries. Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires Durable 6069 aluminum with welded joint and reinforced spoke bed BST-Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel build M-pulse ultra-low drag magnetic pawl adjustable hubs with 1.66 deg engagement Enduro bearings with double-row freehub bearing Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability Includes tubeless tape and presta valves Item Specifications Cassette Body Type Shimano HG 11/12-Speed Road Color Black Defined Color Black Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 584 / 650b / 27.5" Rear Axle 12mm Thru x 148mm Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Valve Presta Wheel Size 27.5" Stan's No Tubes Flow MK4 Rear Wheel Rear Wheel UPC: 847746059769 MPN: DWF470007

by Stan's No Tubes

—$316

Confident and capable of cleaning the A-line yet budget friendly to save up for a season of bucket list rides, the 1/1 hub stays true to the performance heritage of Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 points with 4 engagement, by way of a six pawl driver and 45 tooth drivering. High-load sealed cartridge bearings Classic j-bend spokes Robust protection system using a labyrinth radial lip seal and endcap proximity seals unencumbered by bearing wear or preload CNC machined, anodized and assembled entirely in Asheville, NC Service-friendly retained pawls actuated by durable leaf-springs Unified service parts across the range Item Specifications Bearing Type Sealed Cartridge Cassette Body Type Shimano Micro Spline Color Black Defined Color Black Hub Drilling 28 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend Industry Nine 1/1 Classic Rear Hub Rear Hub UPC: 810098980234 MPN: H0MBXBXE7

by Industry Nine

—$257

The Arch MK4 wheelset is an ideal choice for All-mountain, Downcountry and Trailduro- a versatile aluminum wheelset available for riders who want to push the limits on every trail. Up, down, and wherever the ride takes you, the Arch MK4 wheelset has it under control. Versatile 28mm internal rim width optimized for 2.2-2.5 tires Light and durable 6069 aluminum with welded joint and reinforced spoke bed BST-Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel build M-pulse ultra-low drag hubs with Enduro bearings Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability Includes tubeless tape and presta valves Item Specifications Color Black Defined Color Black Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 584 / 650b / 27.5" Rim Material Alloy Rim Width (Internal) 28 Tire Type Tubeless Ready Valve Presta Wheel Size 27.5" Stan's No Tubes Arch MK4 Front Wheel Front Wheel UPC: 847746059301 MPN: DWA470001

by Stan's No Tubes

—$543

When you're looking for a lightweight Gravel and XC wheelset built to roll fast and last forever, the aluminum Crest MK4 is your wheelset. 25mm rim width optimized for Gravel and XC tires up to 2.3 Light and durable 6069 aluminum with welded joint and reinforced spoke bed BST-Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel build M-pulse ultra-low drag magnetic pawl adjustable hubs with 1.66 deg engagement Enduro bearings with double-row freehub bearing Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability Includes tubeless tape and presta valves Item Specifications Cassette Body Type Shimano Micro Spline Color Black Defined Color Black Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 148mm Rim Material Alloy Rim Width (Internal) 25 Tire Type Tubeless Ready Valve Presta Wheel Size 29" Stan's No Tubes Crest MK4 Rear Wheel Rear Wheel UPC: 847746059141 MPN: DWC490007

by Stan's No Tubes

—$453.90

Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM. Spline Hub with Ratchet LN 18T freehub drive system Intended use = Cross-Country Tubeless ready, 25mm wide and light rim Straight-pull hubs/spokes built with a 3-cross pattern Includes Disc brake adapter, Tubeless Valve and Tape Item Specifications Cassette Body Type SRAM XD Color Black Defined Color Black Hub/Brake Compatibility 6-Bolt Disc Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 148mm Rim Width (Internal) 25 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 29" DT Swiss X 1900 Spline Rear Wheel Rear Wheel EAN: 7613052101040 MPN: W0X1900TEDRSA18806

by DT Swiss

—$359.90

Thanks to the proven freehub Ratchet System, the 350 hub is a dependable partner for every adventure. The 36 tooth ratchets ensure direct power transmission. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools, but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence. 36 points of engagement Patented Star-Ratchet system Contact-free seals and high precision build guarantee smooth bearings Press-fit end caps allow tool-free maintenance and conversion Item Specifications Bearing Type Sealed Cartridge Cassette Body Type SRAM XD Color Black Defined Color Black Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 150mm Skewer Included No Spoke Interface J-Bend DT Swiss 350 Rear Hub Rear Hub EAN: 7613052329178 MPN: H350LDDRR32SA2430S

by DT Swiss

—$329.90

Thanks to the proven freehub Ratchet System, the 350 hub is a dependable partner for every adventure. The 36 tooth ratchets ensure direct power transmission. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools, but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence. 36 points of engagement Patented Star-Ratchet system Contact-free seals and high precision build guarantee smooth bearings Press-fit end caps allow tool-free maintenance and conversion Item Specifications Bearing Type Sealed Cartridge Cassette Body Type Shimano HG Color Black Defined Color Black Hub Drilling 28 Hub/Brake Compatibility Center-Lock Disc Rear Axle 12mm Thru x 142mm Skewer Included No Spoke Interface J-Bend DT Swiss 350 Rear Hub Rear Hub EAN: 7613052330457 MPN: H350NCDBR28SA0442S

by DT Swiss

—$329.90

Thanks to the proven freehub Ratchet System, the 350 hub is a dependable partner for every adventure. The 36 tooth ratchets ensure direct power transmission. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools, but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence. 36 points of engagement Patented Star-Ratchet system Contact-free seals and high precision build guarantee smooth bearings Press-fit end caps allow tool-free maintenance and conversion Item Specifications Bearing Type Sealed Cartridge Cassette Body Type Shimano HG Color Black Defined Color Black Hub Drilling 28 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend DT Swiss 350 Rear Hub Rear Hub EAN: 7613052329307 MPN: H350TDDBR28SA0482S

by DT Swiss

—$564.90

The 240 EXP rear hub is designed for riders with the most extreme ambitions, now lighter, stiffer, more precise and easier to maintain. Enhanced with Ratchet EXP driver technology, using fewer parts while providing greater reliability and easier maintenance. 54 points of engagement 15% improvement in axle stiffness due to new design placing the bearings further apart Integrated notch in end cap allows easier dissasembly Item Specifications Bearing Type Sealed Cartridge Cassette Body Type Shimano Micro Spline Color Black/Red Defined Color Black Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend DT Swiss 240 EXP Rear Hubs Rear Hub EAN: 7613052332819 MPN: H240TDD2R32SA2294S

by DT Swiss

—$57.61

DT hidden nipples are designed for high profile rims, where the inverted design is essential for optimum precision. It is very light and hidden on the inside of the rim and therefore, perfectly suited for high aero wheels. The nipple will align perfectly due to its spherical contact surface. ProLock nipples contain a special adhesive compond (Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond 32 nipples weigh approximately 10 grams Item Specifications Color Silver Defined Color Silver Length 12 Material Alloy Spoke Diameter 2.0 DT Swiss Hidden Spoke Nipple EAN: 7613052199443 MPN: NPAF20120N0100

by DT Swiss

—$931.88

The EXC 1501 Spline One wheel features a tough enduro carbon rim that's paired with a durable 240 hub, creating a reliable wheel for going fast. A 30 mm internal width rim is designed for serious business on the trail, offers precise control to reach and hit the line that isn't always the easiest, but is the fastest. At its center, the legendary 240 hub reliably holds everything together with DT competition race straightpull spokes, optimized for performance and weight. Designed for Enduro applications Carbon, hookless tubeless rim with 30mm internal width 240 hub Competition race spokes Item Specifications Color Black Defined Color Black Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 584 / 650b / 27.5" Rim Material Carbon Rim Width (Internal) 30 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 27.5" DT Swiss EXC 1501 Spline One Front Wheel Front Wheel EAN: 7613052374598 MPN: WEXC150BHIXCA11493

by DT Swiss

—$1,138.99

Tailored to the needs of performance orientated cross-country riders, the XRC 1501 SPLINE ONE leaves nothing to be desired. Lightweight 30 mm wide carbon rims offer ideal support for modern XC tires. Rolling on race proven and super durable 240 hubs with the Ratchet EXP freehub system, allowing every bit of energy to be transferred into forward motion. Designed for Cross Country applications Carbon rim with 30mm internal width 240 hub with Ratchet EXP driver Competition race spokes and Squorx nipples Item Specifications Cassette Body Type Shimano Micro Spline Cassette Body Type SRAM XD Color Black Defined Color Black Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 148mm Rim Material Carbon Rim Width (Internal) 30 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 29" DT Swiss XRC 1501 SPLINE ONE Rear Wheel Rear Wheel EAN: 7613052374529 MPN: WXRC150TEDRCA11460

by DT Swiss

—$710

Versatility is the name of the game with the Industry Nine AR25. AR25 is intended to be used on all road surfaces - tarmac to gravel. Every road on the map is fair game when you're riding AR25. Torch 3-pawl freehub body offers low drag and reliable 6 degree engagement High quality aluminum alloy with weatherproof sublimated graphics, tubeless friendly bead shelf, and a proprietary profile Item Specifications Cassette Body Type Shimano HG 11/12-Speed Road Defined Color Black Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 142mm Rim Width (Internal) 21.5 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 700c Industry Nine AR25 Rear Wheel Rear Wheel UPC: 810098988339 MPN: WCDLBBBBXB1

by Industry Nine

—$157.90

RR 511 Rim Tubeless-Ready Alloy rim can be used with or without tubes (tape, valves and sealant sold separately) 2.0 silver alloy Prolock Squorx Pro Head nipples and PHR washers included The wheel must be built with the supplied PHR washers and Pro Head nipples. The PHR washer must be positioned between the nipple and rim and fit correctly within the radius of the rim. DT Swiss recommends that the contact area between the nipple and PHR washer is greased ERD and weights shown include PHR washers Item Specifications Brake Compatibility Rim Brake Brake Track Machined Color Black Defined Color Black Hub Drilling 24 ISO Diameter 622 / Road / 29" Manufacturer Spec ERD (mm) 581 Rim Center Offset (mm) 0 Rim Material Alloy Rim Width (Internal) 18 Tire Type Clincher Tire Type Tubeless Ready Valve Presta Weight 533 Wheel Size 700c DT Swiss RR 511 Rims EAN: 7630033821957 MPN: RDRR51RPN24S011417

by DT Swiss

—$120.09

Competition Black Spokes for wheel service and repairs. Double Butted: 2.0/1.8/2.0 One 264mm spoke = 6g Nipples sold separately Item Specifications Color Black Defined Color Black Length 287 Spoke Interface J-Bend Spoke Profile Double Butted Thread Diameter 2.0 DT Swiss Competition Black Spokes Spoke, Bulk EAN: 7613052263182 MPN: SCO020287S0100

by DT Swiss

—$470

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing and assembly is done to exacting standards. 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control 6 pawl, 6 phase 115 tooth drivering Easily serviced with no proprietary tools. Designed to keep you in the saddle and out of the service queue Classic j-bend spoke interface Steel cartridge bearings are durable Item Specifications Bearing Type Sealed Cartridge Cassette Body Type Shimano Micro Spline Center to Flange, Left 38 Center to Flange, Right 25 Color Orange Defined Color Orange Flange Diameter, Left 58 Flange Diameter, Right 60 Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend Weight 299 Industry Nine Hydra Classic Rear Hub Rear Hub UPC: 810098980784 MPN: H2MOXAXE7

by Industry Nine

—$1,036.90

High end, bladed straightpull spokes and the most reliable and light weight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip and lightweight in combination with a higher volume tire, the wide and stiff full carbon rims accelerate with the best of them. So the PRC 1400 SPLINE 35 is ready for anything, are you?Spline 240S based hub Item Specifications Color Black Defined Color Black Front Axle 12mm Thru x 100mm Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rim Width (Internal) 18 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 700c DT Swiss PRC 1400 Spline Front Wheel Front Wheel EAN: 7613052051864 MPN: WPRC140AIDXCA04402

by DT Swiss

—$850

The 303 XPLR S is big upgrade for gravel riders without a big price tag. This wheelset borrows key innovations from the premium wide gravel wheelset, it is affordable and robust for discerning gravel riders. The 303 XPLR S are fast on gravel, thanks to its mega-wide rim that integrates seamlessly with approved gravel racing tires. In gravel, resistance and vibrations from bumpy surfaces create a barrier that slows riders down. To combat this, Zipp applied Total System Efficiency specifically to the challenges of gravel. The wide profile increases air volume, allowing for lower tire pressures without squirm. That means you mitigate surface vibrations while maintaining grip when cornering or traction while climbing. The rim profile also creates a seamless transition with gravel tires for unsurpassed aero efficiency on gravel. And while the 303 XPLR S is built big, it's light to keep you fast and fresh for those long, fulfilling days in the saddle. UD Carbon fiber construction, tubeless and hookless rim construction: 32mm width and 54mm depth profile Wide and deep profile integrates seamlessly with gravel tires to increase aerodynamic efficiency CX-Ray spokes with aluminum nipples, carbon steel cartridge bearings Applies Zipp s Total System Efficiency to high-performance gravel Zipp 76D hubs with sealed cartridge - carbon Steel bearings Designed for Zipp approved, compatible tires only Max tire pressure 50 psi, with the ability to run pressures under 30 psi Item Specifications Cassette Body Type SRAM XDR Color Black/Dark Gray Defined Color Carbon Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 142mm Rim Material Carbon Rim Width (Internal) 32 Tire Type Tubeless Ready Valve Presta Wheel Size 700c Zipp 303 XPLR S Rear Wheel - B1 Rear Wheel UPC: 710845931468 MPN: 00.1918.805.002

by Zipp

—$700

The 303 XPLR S is big upgrade for gravel riders without a big price tag. This wheelset borrows key innovations from the premium wide gravel wheelset, it is affordable and robust for discerning gravel riders. The 303 XPLR S are fast on gravel, thanks to its mega-wide rim that integrates seamlessly with approved gravel racing tires. In gravel, resistance and vibrations from bumpy surfaces create a barrier that slows riders down. To combat this, Zipp applied Total System Efficiency specifically to the challenges of gravel. The wide profile increases air volume, allowing for lower tire pressures without squirm. That means you mitigate surface vibrations while maintaining grip when cornering or traction while climbing. The rim profile also creates a seamless transition with gravel tires for unsurpassed aero efficiency on gravel. And while the 303 XPLR S is built big, it's light to keep you fast and fresh for those long, fulfilling days in the saddle. UD Carbon fiber construction, tubeless and hookless rim construction: 32mm width and 54mm depth profile Wide and deep profile integrates seamlessly with gravel tires to increase aerodynamic efficiency CX-Ray spokes with aluminum nipples, carbon steel cartridge bearings Applies Zipp s Total System Efficiency to high-performance gravel Zipp 76D hubs with sealed cartridge - carbon Steel bearings Designed for Zipp approved, compatible tires only Max tire pressure 50 psi, with the ability to run pressures under 30 psi Item Specifications Color Black/Dark Gray Defined Color Carbon Front Axle 12mm Thru x 100mm Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rim Material Carbon Rim Width (Internal) 32 Tire Type Tubeless Ready Valve Presta Wheel Size 700c Zipp 303 XPLR S Front Wheel - B1 Front Wheel UPC: 710845931420 MPN: 00.1918.804.000

by Zipp

—$310

Boost front hubs are designed as precision mountain tools. Featuring a one-piece axle to provide a stiff hub with rail accurate steering. To thwart mud, water, and contaminants as you power through rough trails, Boost hubs have heavy-duty bearing seals and snaprings, that provide superior protection with ultra-low drag. Wide flange placement Fits 110x15mm Boost spacing Easily serviceable with a T10 Torx and pick or pen knife Engineered, manufactured, and assembled in Portland, Oregon USA with King Lifetime Warranty Item Specifications Bearing Type Sealed Cartridge Color Matte Jade Defined Color Green Front Axle 15mm Thru x 110mm Hub Drilling 28 Hub/Brake Compatibility 6-Bolt Disc Spoke Interface J-Bend Chris King Boost Front Hub Front Hub UPC: 841529275360 MPN: DDG2BB

by Chris King

—$1,599

30 XC Wheels deliver climbing efficiency and descending performance for the needs of today's World Cup XC racing and modern XC bikes. With steeper and more technical courses, the world's best riders need more control and strength, without compromising on weight. 30 XC delivers on both. Modern XC race bikes have wider tires, more travel and geometry that allows riders to push harder than ever before. The 30mm internal width accommodates wider tires (2.35-2.5), for better support in corners and more traction in technical sections Increased spoke count to 28. The new rim gives you improved strength anddurability at a lower weight DT Swiss Degree of Freedom system offers a tangible increase in performance, with no weight penalty, by reducing pedal kickback and improving suspension performance 30 XC Wheels include DT Swiss Deg 90 Hubs with Degree of Freedom ratchets installed in the 0deg position for high engagement and quick acceleration Item Specifications Cassette Body Type SRAM XD Color Carbon Defined Color Black Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 148mm Rim Material Carbon Rim Width (Internal) 30 Tire Type Tubeless Ready Valve Presta Wheel Size 29" Reserve Wheels Reserve 30 XC Wheelset Wheelset UPC: 192219526126 MPN: 86-29714

by Reserve Wheels

—$999

Trail One Components - Shed Wheelset w/ Industry Nine Hydra 2 Hubs Built around the Trail One Components Shed Rim inspired by the Frederick Watershed, this wheelset is made for riders who want something strong, dependable, and a little more premium when it comes to hub performance. The Shed Rim is downhill and e-bike rated, designed to hold up to repeated impacts, rock strikes, and hard miles on the kind of rough trails that can quickly expose a weaker wheelset. Paired with Industry Nine Hydra 2 hubs, this build adds ultra-fast engagement, proven performance, and a more refined finish for riders who want a wheelset that feels every bit as capable as it looks. We finish it off with DT Swiss Competition spokes and silver brass nipples for a clean, classic build that rides balanced and is ready for real abuse. Stock hub colors are available in Black, Silver, and Bronze, with Gold, Orange, Purple, Red, and Turquoise offered as optional colors for riders looking to add a little more personality to their bike. It is the kind of wheelset built to take a beating, respond quickly under power, and keep rolling with confidence, all backed by a lifetime warranty and Trail One’s 60% off crash replacement program. $1 Per Wheel Sold Donated to Mid-Atlantic Off-Road Enthusiasts (MORE) Trail One Shed rims paired with Industry Nine Hydra 2 hubs create a premium, fast-engaging wheelset for aggressive trail, enduro, and e-bike riding Asymmetric rim design helps create more even spoke tension from side to side, contributing to a stronger, more balanced, and longer-lasting wheel build 28 hole front and 32 hole rear layout helps keep ride feel more comfortable and compliant up front while giving the rear wheel added strength for repeated impacts and hard use Wheel Specifications Product Trail One Shed Wheelset with Industry Nine Hydra 2 Hubs Wheel Size Options 29" / 29" Rim Material 6061 Aluminum Rim Rating Downhill and E-Bike Rated Front Hole Count 28h Rear Hole Count 32h Rim Offset 4mm Hub Model Industry Nine Hydra 2 Hub Colors Black, Silver, Bronze stock / Gold, Orange, Purple, Red, Turquoise optional Freehub Options SRAM XD or Shimano MS Hub Engagement 870 Points of Engagement / 0.41 Degrees Spokes DT Swiss Competition, Silver Nipples Silver Brass Warranty Lifetime Crash Replacement 60% Off Crash Replacement Program Trail Support $1 Per Wheel Sold Donated to Mid-Atlantic Off-Road Enthusiasts (MORE) Trail One Components Shed Wheelset Hydra 2 Wheelset

by Trail One Components

—$478.90

The 350 Hybrid hub is built for extended eMTB adventures, featuring a larger hub body and the proven Ratchet System with 24 teeth for improved durability. The increased hub flange size and larger spoke holes are designed to accommodate 2.34 mm DT Swiss spokes, providing greater resistance to acceleration and braking torques. The freehub system, made of hardened steel, further enhances the overall system durability. Consider building this hub into your next eMTB wheelset for an extended and stress-free riding experience. DEG DF (Degrees of freedom) offers 3 setup options: 0 , 10 and 20 . The number of values that have the freedom to vary in the final result of a statistical calculation 60 points of engagement Increased wall thickness Oversize spoke interface Oversize hub shell Item Specifications Bearing Type Sealed Cartridge Cassette Body Type Shimano HG Color Black/White Defined Color Black Designed for ebike Yes Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend Tooth Count 60 DT Swiss 350 DEG Hybrid Rear Hub Rear Hub EAN: 7613052426259 MPN: H350TDD5R32SA1208S

by DT Swiss

—$682.90

When you're fully committed to having fun and not always riding the planned lines, the EX 1700 Classic is ready to get rowdy. Asymmetric aluminum rims are laced with DT competition race spokes, supported by the reliable 350 hub to keep you rolling the rough. For enduro riders looking to reach the podium, the EX 1700 Classic is all about fun and no fuss, and ready to get rowdy. Includes 32mm Tubeless tape, Black alloy tubeless valve 18-25mm Asymmetrical, aluminum rim design with welded rim joint to ensure a stronger wheel build with even spoke tension Tubeless ready design, with tape pre-installed Reliable DT 350 hubs; tool-free to adjust, require low maintenance and add no extra weight State-of-the-art Ratchet DEG DF (Degrees of Freedom) technology; high-engagement 72pt driver with a tunable anti-pedal kickback system designed into the hub to maximize pedal efficiency DT competition race spokes feature an extra thin middle section, while still ensuring stiffness and durability Each spoke is hand-laced to the hubs and rims using flat hex aluminum nipples to prevent tape pinching, creating an even more durable wheelset Item Specifications Cassette Body Type SRAM XD Color Black Defined Color Black Designed for ebike Yes Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 584 / 650b / 27.5" Rear Axle 12mm Thru x 148mm Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 27.5" DT Swiss EX 1700 Classic 30 Rear Wheel Rear Wheel EAN: 7613052532042 MPN: WEX1700THDRSA27986

by DT Swiss

—$1,291.90

Prepare to get going with a trail-optimized e-MTB upgrade: the HXC 1500 Spline carbon wheelset. Built with DT hybrid spokes, these wheels are designed to handle the high torque of e-bikes while delivering agility. The Pure carbon rims keep your ride light and nimble, allowing you to dance through the forest with ease. The robust 240 Spline Hybrid hub with Ratchet DEG, including the e-MTB specific DF Hybrid technology, ensures maximum reliability so you can focus on what's important. Get going, the form will follow the flow. Includes both XD and Micro Spline Freehub Body, 32mm Tubeless tape, Black alloy tubeless valve 18-25mm Pure carbon rim technology reduces rotational mass and boosts the wheels lightness for faster acceleration and improved airtime. The patented carbon construction uses continuous carbon layers to reinforce the rim, ensuring high impact resistance even on hard landings, so you won't break a sweat Tubeless ready design, with tape pre-installed 240 Hybrid Straightpull hub provides additional reliability, adapted for the area of application of each wheel e-MTB specific state-of-the-art Ratchet DEG DF (Degrees of Freedom) technology; high-engagement 60pt driver with a tunable anti-pedal kickback system designed into the hub to maximize pedal efficiency Built with DT Complite spokes featuring a unique blading process to create a durable spoke that's made to last Item Specifications Cassette Body Type Shimano Micro Spline Cassette Body Type SRAM XD Color Black Defined Color Black Designed for ebike Yes Hub/Brake Compatibility Center-Lock Disc ISO Diameter 584 / 650b / 27.5" Rear Axle 12mm Thru x 148mm Rim Material Carbon Rim Width (Internal) 30 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 27.5" DT Swiss HXC 1500 Spline 30 Rear Wheel Rear Wheel EAN: 7613052533315 MPN: WHXC150TGDNCA28653

by DT Swiss

—$1,270.90

All mountain, trail or just mountain biking - the XMC 1500 Spline wheelset is made for long climbs, endless descents and trails that end in the horizon. Pure carbon rims keep it light and tough, DT Complite spokes keep it straight and smooth, and the 240 hub ensures it rolls and holds in all conditions. Whether shredding through singletrack or heading into the unknown, this wheelset delivers the pop and control to make every ride unforgettable. Get out there and the form will follow the flow. Includes both XD and Micro Spline Freehub Body, 32mm Tubeless tape, Black alloy tubeless valve 18-25mm Pure carbon rim technology reduces rotational mass and boosts the wheels lightness for faster acceleration and improved airtime. The patented carbon construction uses continuous carbon layers to reinforce the rim, ensuring high impact resistance even on hard landings, so you won't break a sweat Tubeless ready design, with tape pre-installed 240 Straightpull hub provides additional reliability, adapted for the area of application of each wheel State-of-the-art Ratchet DEG DF (Degrees of Freedom) technology; high-engagement 90pt driver with a tunable anti-pedal kickback system designed into the hub to maximize pedal efficiency Built with DT Complite spokes featuring a unique blading process to create a durable spoke that's made to last Item Specifications Cassette Body Type Shimano Micro Spline Cassette Body Type SRAM XD Color Black Defined Color Black Designed for ebike Yes Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 148mm Rim Material Carbon Rim Width (Internal) 30 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 29" DT Swiss XMC 1500 Spline 30 Rear Wheel Rear Wheel EAN: 7613052532776 MPN: WXMC150TEDRCA28599

by DT Swiss

—$459.90

When you're fully committed to having fun and not always riding the planned lines, the EX 1700 Classic is ready to get rowdy. Asymmetric aluminum rims are laced with DT competition race spokes, supported by the reliable 350 hub to keep you rolling the rough. For enduro riders looking to reach the podium, the EX 1700 Classic is all about fun and no fuss, and ready to get rowdy. Includes 32mm Tubeless tape, Black alloy tubeless valve 18-25mm Asymmetrical, aluminum rim design with welded rim joint to ensure a stronger wheel build with even spoke tension Tubeless ready design, with tape pre-installed Reliable DT 350 hubs require low maintenance and add no extra weight DT competition race spokes feature an extra thin middle section, while still ensuring stiffness and durability Each spoke is hand-laced to the hubs and rims using flat hex aluminum nipples to prevent tape pinching, creating an even more durable wheelset Item Specifications Color Black Defined Color Black Designed for ebike Yes Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 584 / 650b / 27.5" Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 27.5" DT Swiss EX 1700 Classic 30 Front Wheel Front Wheel EAN: 7613052532035 MPN: WEX1700BHIXSA27985

by DT Swiss

—$459.90

When you're fully committed to having fun and not always riding the planned lines, the EX 1700 Classic is ready to get rowdy. Asymmetric aluminum rims are laced with DT competition race spokes, supported by the reliable 350 hub to keep you rolling the rough. For enduro riders looking to reach the podium, the EX 1700 Classic is all about fun and no fuss, and ready to get rowdy. Includes 32mm Tubeless tape, Black alloy tubeless valve 18-25mm Asymmetrical, aluminum rim design with welded rim joint to ensure a stronger wheel build with even spoke tension Tubeless ready design, with tape pre-installed Reliable DT 350 hubs require low maintenance and add no extra weight DT competition race spokes feature an extra thin middle section, while still ensuring stiffness and durability Each spoke is hand-laced to the hubs and rims using flat hex aluminum nipples to prevent tape pinching, creating an even more durable wheelset Item Specifications Color Black Defined Color Black Designed for ebike Yes Front Axle 15mm Thru x 110mm Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 29" DT Swiss EX 1700 Classic 30 Front Wheel Front Wheel EAN: 7613052546964 MPN: WEX1700BEIXSA27977

by DT Swiss

—$459.90

When you just want the fun of exploring the mountains, don't search further, the XM 1700 Spline is ready to conquer the roughest terrain without any fuss. Its fast-engaging 350 hub is just what you need to tackle technical uphill sections where the bike's reactivity is as important as yours. Built with DT competition race spokes, asymmetric rims - light at the front and more resistant at the back - this aluminum wheelset has all the versatility you need for all the mountains out there. Includes 6-bolt adapter, 32mm Tubeless tape, Black alloy tubeless valve 18-25mm Asymmetrical, aluminum rim design with welded rim joint to ensure a stronger wheel build with even spoke tension Reliable DT 350 Hybrid Straightpull hubs require low maintenance and add no extra weight Tubeless ready design, with tape pre-installed Competition spokes and Squorx nipples Designed for All Mountain applications Item Specifications Color Black Defined Color Black Designed for ebike Yes Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 29" DT Swiss XM 1700 Spline 30 Front Wheel Front Wheel EAN: 7613052546698 MPN: WXM1700BEIXSA27944

by DT Swiss

—$917.90

All mountain, trail or just mountain biking - the XMC 1500 Spline wheelset is made for long climbs, endless descents and trails that end in the horizon. Pure carbon rims keep it light and tough, DT Complite spokes keep it straight and smooth, and the 240 hub ensures it rolls and holds in all conditions. Whether shredding through singletrack or heading into the unknown, this wheelset delivers the pop and control to make every ride unforgettable. Get out there and the form will follow the flow. Includes 6-bolt adapter, 32mm Tubeless tape, Black alloy tubeless valve 18-25mm Pure carbon rim technology reduces rotational mass and boosts the wheels lightness for faster acceleration and improved airtime. The patented carbon construction uses continuous carbon layers to reinforce the rim, ensuring high impact resistance even on hard landings, so you won't break a sweat Tubeless ready design, with tape pre-installed 240 Straightpull hub provides additional reliability, adapted for the area of application of each wheel Built with DT Complite spokes featuring a unique blading process to create a durable spoke that's made to last Item Specifications Color Black Defined Color Black Designed for ebike Yes Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rim Material Carbon Rim Width (Internal) 30 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 29" DT Swiss XMC 1500 Spline 30 Front Wheel Front Wheel EAN: 7613052532769 MPN: WXMC150BEIXCA28598

by DT Swiss

—$118.95

Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig. KOM Tough rims are extruded from top-tier AL 6069 alloy to provide utmost durability at a reasonable weight. WTB's I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world's most aggressive riders. Proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world, KOM Tough rims provide a burly rim for every usage and style of riding. TCS2.0 rims require the application of TCS tape on top of the Solid-Strip Patented CVX technology strengthens the spoke bed without increasing weight, by thickening material where it s needed and removing where it s not. The unique geometry also increases contact area between the nipple head and rim to better distribute load and reduce stress at the spoke hole TCS 2.0 creates a more robust, easily installed and dependable tubeless system A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area Item Specifications Brake Compatibility Disc Only Brake Track None Color Black Defined Color Black Eyelets None Hub Drilling 32 ISO Diameter 584 / 650b / 27.5" Manufacturer Spec ERD (mm) 570 Material Alloy Rim Center Offset (mm) 0 Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Valve Presta Weight 531 Wheel Size 27.5" WTB KOM Tough Rim Rims UPC: 714401206427 MPN: W020-0642

by WTB

—$398.99

Vault series hubs represent a top-tier platform, engineered for riders who want quick engagement, exceptional stiffness, and long-term durability across aggressive trail, enduro, and gravity riding. Built around a standout oversized hub shell and a high-engagement drive system, the Vault hubs are designed to transfer rider power efficiently while withstanding heavy loads and harsh terrain. Oversized hub shell for increased torsional and lateral stiffness Proven 6902 cartridge bearings were selected due to their large ball diameter and durability 60 tooth drive ring alternately engages six double tooth pawls, giving you 3degree engagement for near-instant power transfer Wide bearing placement was designed to decrease load on the bearings, improving lifespan Low-drag labyrinth seals designed specifically for the Vault hubs to protect internals Swap endcaps without tools for hassle-free changes Item Specifications Bearing Type Sealed Cartridge Cassette Body Type SRAM XD Center to Flange, Left 36.5 Center to Flange, Right 23 Color Kashmoney Defined Color Gold Designed for ebike Yes Flange Diameter, Left 61.5 Flange Diameter, Right 71.5 Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend RaceFace Vault Rear Hub Rear Hub UPC: 821973495798 MPN: 945-00-003

by RaceFace

—$230.99

Vault series hubs represent a top-tier platform, engineered for riders who want exceptional stiffness, low-rolling resistance, and long-term durability across aggressive trail, enduro, and gravity riding. Built around a standout oversized hub shell and high quality internals, the Vault hubs are designed to transfer rider power efficiently while withstanding heavy loads and harsh terrain. Oversized hub shell for increased torsional and lateral stiffness Proven 6902 cartridge bearings were selected due to their large ball diameter and durability Wide bearing placement was designed to decrease load on the bearings, improving lifespan Low-drag labyrinth seals designed specifically for the Vault hubs to protect internals Swap endcaps without tools for hassle-free changes Item Specifications Bearing Type Sealed Cartridge Center to Flange, Left 27.5 Center to Flange, Right 27 Color Kashmoney Defined Color Gold Flange Diameter, Left 66 Flange Diameter, Right 56.5 Front Axle 15mm Thru x 110mm Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Skewer Included No Spoke Interface J-Bend Weight 177 RaceFace Vault Front Hub Front Hub UPC: 821973496122 MPN: 945-00-005

by RaceFace

—$799

Your wheels are arguably the most important component on your mountain bike, which is why Reserve developed an all-new line of do-it-all aluminum wheels. Reserve aluminum wheels have been designed and developed to provide a product that rivals the performance of the much-loved carbon wheels, but at a much more accessible price point. And with an industry-leading lifetime guarantee, you can feel confident you will be enjoying these wheels for years to come. 30 HD AL wheels are designed for everything from DH to trail to Ebikes. Built with DT Swiss Hubs featuring the Degrees Of Freedom Anti-pedal Kickback Sytem Offers 3 setup options: 0 , 10 and 20 ; the number of values that have the freedom to vary in the final result of a statistical calculation Aluminum wheels are designed to withstand any abuse you can throw at them, supported by a Reserve lifetime guarantee Asymmetrical rims build stiffer, stronger and more reliable wheels by improving the bracing angles and equalizing the spoke tensions between the drive and non-drive side spokes Disc brake only, tubeless ready design with tape included Includes the patented Fillmore valves with a high-flow design that eases tubeless set up and eliminates the traditional, delicate, clog-inciting valve core of yesteryear 30 HD Al rims feature a 30mm width and 22mm depth profile that's designed for DH, Trail, All Mountain, Enduro and E-bikes Recommended for tires 2.2 - 2.6" wide Item Specifications Cassette Body Type SRAM XD Color Black Defined Color Black Front Axle 20mm Thru x 110mm Boost Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 584 / 650b / 27.5" ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 157mm Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Valve Presta Wheel Size 27.5" Wheel Size 29" Reserve Wheels Reserve 30 HD AL Wheelset Wheelset UPC: 192219524122 MPN: 86-29652

by Reserve Wheels

—$2,395

The Berd HAWK30 GOLD Carbon Wheels are a purpose built XC race wheelset, claimed to be the lightest and fastest 30mm cross country wheels on the planet. With a 30 mm internal width and a 22 mm rim profile, the HAWK30 GOLD is designed to keep modern XC tires supported and cornering confidently, while staying absolutely ridiculous on the scale. Berd claims nearly 250 grams shaved from their previous XC wheelset and a headline 1,022 gram wheelset weight, which is a fancy way of saying these things want to sprint the moment the trail turns to dirt. At the center is the Berd Talon ESL hub, developed with Erase Components in Belgium, featuring a titanium freehub driver and 70 points of engagement, all while weighing 333 grams for the set. “ESL” stands for Equal Spoke Length, meaning the same spoke length is used throughout, which makes life easier for both wheel nerds and anyone who has ever tried to label spare spokes at midnight. The whole package is tied together with Berd’s PolyLight spokes for a smoother, vibration damping ride feel, and it comes tubeless ready with Boost spacing, 24 spokes front and rear, and Centerlock compatibility, plus lifetime warranty and free crash replacement on the HAWK30 GOLD rims for extra peace of mind when race brain takes over. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Berd Talon ESL Hookflange Freehub: Shimano HG, Microspline, or SRAM XD Hole Count: 24 Brake Type: Centerlock External Rim Width: 35mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: 1,022 grams (without rim tape and valves) Lifetime Warranty Berd Hawk30 GOLD Wheelset MPN: BERD-H30-GLD-PARENT

by Berd

—$2,395

The Berd HAWK30 GOLD Carbon Wheels are a purpose built XC race wheelset, claimed to be the lightest and fastest 30mm cross country wheels on the planet. With a 30 mm internal width and a 22 mm rim profile, the HAWK30 GOLD is designed to keep modern XC tires supported and cornering confidently, while staying absolutely ridiculous on the scale. Berd claims nearly 250 grams shaved from their previous XC wheelset and a headline 1,022 gram wheelset weight, which is a fancy way of saying these things want to sprint the moment the trail turns to dirt. At the center is the Berd Talon ESL hub, developed with Erase Components in Belgium, featuring a titanium freehub driver and 70 points of engagement, all while weighing 333 grams for the set. “ESL” stands for Equal Spoke Length, meaning the same spoke length is used throughout, which makes life easier for both wheel nerds and anyone who has ever tried to label spare spokes at midnight. The whole package is tied together with Berd’s PolyLight spokes for a smoother, vibration damping ride feel, and it comes tubeless ready with Boost spacing, 24 spokes front and rear, and Centerlock compatibility, plus lifetime warranty and free crash replacement on the HAWK30 GOLD rims for extra peace of mind when race brain takes over. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Berd Talon ESL Hookflange Freehub: Shimano HG, Microspline, or SRAM XD Hole Count: 24 Brake Type: Centerlock External Rim Width: 35mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: 1,022 grams (without rim tape and valves) Lifetime Warranty Berd Hawk30 GOLD Wheelset MPN: BERD-H30-GLD-WHT-PARENT

by Berd

—$318.80

Building on Hope's 30+ years of manufacturing hubs, the Pro 5 is the combination of all their experience into a product that meets and exceed the demands of current and future bike technology. Improved sealing to stop dirt ingress and to reduce drag, while the Labyrinth seals have zero drag for incredible freewheeling performance Wire cut pawls from high strength steel for maximum strength, design to increase longevity, load capacity and a reduction of drag Hub shell is machined from forged 2014 T6 Aluminium billet, the profile is designed for increased stiffness without adding weight Increased engagement to 108 with a new offset 6 pawl freehub design Fully serviceable and rebuildable with simple tools End spacers can be easily swapped to suit different frame and axle standards - Sold separately Item Specifications Bearing Type Cartridge Bearings Cassette Body Type Shimano Micro Spline Center to Flange, Left 35 Center to Flange, Right 22.6 Color Black Defined Color Black Flange Diameter, Left 57 Flange Diameter, Right 59 Hub Drilling 28 Hub/Brake Compatibility 6-Bolt Disc Hope Pro 5 Rear Hub Rear Hub EAN: 5056850908169 MPN: RHP528K148MS

by Hope

—$318.80

Building on Hope's 30+ years of manufacturing hubs, the Pro 5 is the combination of all their experience into a product that meets and exceed the demands of current and future bike technology. Improved sealing to stop dirt ingress and to reduce drag, while the Labyrinth seals have zero drag for incredible freewheeling performance Wire cut pawls from high strength steel for maximum strength, design to increase longevity, load capacity and a reduction of drag Hub shell is machined from forged 2014 T6 Aluminium billet, the profile is designed for increased stiffness without adding weight Increased engagement to 108 with a new offset 6 pawl freehub design Fully serviceable and rebuildable with simple tools End spacers can be easily swapped to suit different frame and axle standards - Sold separately Item Specifications Bearing Type Cartridge Bearings Cassette Body Type SRAM XD Center to Flange, Left 35 Center to Flange, Right 22.6 Color Black Defined Color Black Flange Diameter, Left 57 Flange Diameter, Right 59 Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Hope Pro 5 Rear Hub Rear Hub EAN: 5056850908466 MPN: RHP532K148XD

by Hope

—$381

The Arch MK4 LTD wheels combine Stan's flagship MK4 rim design with the robust E-Sync hub. For a limited time, the MK4 LTD is a performance wheelset at an incredible price point! Laced with premium Sapim Race spokes and brass nipples laced to the extra-durable E-sync hub. Featuring chromoly steel axles and double row Enduro bearings, special heat treated steel ratchet rings, and a pawl design that reduces stress on freehub and bearings, making it the perfect choice for traditional and e-bike use. 32 Spokes 28mm rim width optimized for Trail and XC tires up to 2.5 Light and durable 6069 aluminum with welded joint and reinforced spoke bed BST Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel build E-sync hubs offer fast 8.18 engagement with reinforced pawls Enduro bearings with double-row freehub bearing and chromoly axle offer 47% increase in max torque capacity over Neo hubs Includes Tubeless Tape and Valve 3-year rim warranty with 1-year crash replacement Item Specifications Cassette Body Type Shimano Micro Spline Color Black Defined Color Black Designed for ebike Yes Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 148mm Rim Material Alloy Rim Width (Internal) 28 Tire Type Tubeless Ready Valve Presta Wheel Size 29" Stan's No Tubes Arch MK4 LTD Rear Wheel Rear Wheel UPC: 708752545441

by Stan's No Tubes

—$892.99

Ride Light. Log Miles. Get Loose. The Era SL wheel was designed to bridge two riding disciplines with the goal of excelling at both ends of the spectrum. Not your typical XC race wheel, nor a strength-forward Enduro wheel. A happy medium, designed specifically for the mass of riders who sit happily in between. At 385 grams, the Era SL rim is the lightest ever produced by Race Face. That low rotational mass allows quick acceleration and maintains momentum on climbs. The complete wheel is light enough for the weekend XC racer who wants to push their bike well beyond the demands of your typical XC course Era SL uses a 22mm rim depth to keep strength up so you can throw your little bike head-first into the rough stuff without remorse or hesitation. The 29mm internal width allows up to 2.6-inch tires for all your low-pressure, low rolling resistance, high traction needs Laced to the proven and reliable Vault Hub, Era SL is made to be laterally compliant, smoothing out the small bumps and lowering rider fatigue, all while keeping that XC pedal efficiency. With 3-degrees of engagement and large-diameter bearings, Vault keeps spinning for years of daily punishment Carbon fiber rim construction, tubeless ready with tape and valves included Item Specifications Cassette Body Type SRAM XD Color Carbon Black Defined Color Carbon Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 148mm Rim Width (Internal) 29 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 29" RaceFace Era SL Rear Wheel Rear Wheel UPC: 821973510026 MPN: 944-00-122

by RaceFace

—$244

The Arch MK4 LTD wheels combine Stan's flagship MK4 rim design with the robust E-Sync hub. For a limited time, the MK4 LTD is a performance wheelset at an incredible price point! Laced with premium Sapim Race spokes and brass nipples laced to the extra-durable E-sync hub, featuring chromoly steel axles and double row Enduro bearings, and special heat treated steel ratchet rings, making it the perfect choice for traditional and e-bike use. 32 Spokes 28mm rim width optimized for Trail and XC tires up to 2.5 Light and durable 6069 aluminum with welded joint and reinforced spoke bed BST Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel build E-sync hubs with Enduro bearings for relabile performance Includes Tubeless Tape and Valve 3-year rim warranty with 1-year crash replacement Item Specifications Color Black Defined Color Black Designed for ebike Yes Front Axle 15mm Thru x 100mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rim Material Alloy Rim Width (Internal) 28 Tire Type Tubeless Ready Valve Presta Wheel Size 29" Stan's No Tubes Arch MK4 LTD Front Wheel Front Wheel UPC: 708752545342

by Stan's No Tubes

—$244

The Arch MK4 LTD wheels combine Stan's flagship MK4 rim design with the robust E-Sync hub. For a limited time, the MK4 LTD is a performance wheelset at an incredible price point! Laced with premium Sapim Race spokes and brass nipples laced to the extra-durable E-sync hub, featuring chromoly steel axles and double row Enduro bearings, and special heat treated steel ratchet rings, making it the perfect choice for traditional and e-bike use. 32 Spokes 28mm rim width optimized for Trail and XC tires up to 2.5 Light and durable 6069 aluminum with welded joint and reinforced spoke bed BST Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel build E-sync hubs with Enduro bearings for relabile performance Includes Tubeless Tape and Valve 3-year rim warranty with 1-year crash replacement Item Specifications Color Black Defined Color Black Designed for ebike Yes Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rim Material Alloy Rim Width (Internal) 28 Tire Type Tubeless Ready Valve Presta Wheel Size 29" Stan's No Tubes Arch MK4 LTD Front Wheel Front Wheel UPC: 708752545380

by Stan's No Tubes

—$244

The Flow MK4 LTD wheels combine Stan's flagship MK4 rim design with the robust E-Sync hub. For a limited time, the MK4 LTD is a performance wheelset at an incredible price point! Laced with premium Sapim Race spokes and brass nipples laced to the extra-durable E-sync hub, featuring chromoly steel axles and double row Enduro bearings, and special heat treated steel ratchet rings, making it the perfect choice for traditional and e-bike use. 32 Spokes Low-profile 30mm internal width opitimizes tire shape, traction , and control for 2.3-2.6" tires Light and durable 6069 aluminum with welded joint and reinforced spoke bed BST Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel build E-sync hubs with Enduro bearings for relabile performance Includes Tubeless Tape and Valve 3-year rim warranty with 1-year crash replacement Item Specifications Color Black Defined Color Black Designed for ebike Yes Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Valve Presta Wheel Size 29" Stan's No Tubes Flow MK4 LTD Front Wheel Front Wheel UPC: 708752545489

by Stan's No Tubes

—$839.99

Ride Light. Log Miles. Get Loose. The Era SL wheel was designed to bridge two riding disciplines with the goal of excelling at both ends of the spectrum. Not your typical XC race wheel, nor a strength-forward Enduro wheel. A happy medium, designed specifically for the mass of riders who sit happily in between. At 385 grams, the Era SL rim is the lightest ever produced by Race Face. That low rotational mass allows quick acceleration and maintains momentum on climbs. The complete wheel is light enough for the weekend XC racer who wants to push their bike well beyond the demands of your typical XC course Era SL uses a 22mm rim depth to keep strength up so you can throw your little bike head-first into the rough stuff without remorse or hesitation. The 29mm internal width allows up to 2.6-inch tires for all your low-pressure, low rolling resistance, high traction needs Laced to the proven and reliable Vault Hub, Era SL is made to be laterally compliant, smoothing out the small bumps and lowering rider fatigue, all while keeping that XC pedal efficiency. With large-diameter bearings, Vault keeps spinning for years of daily punishment Carbon fiber rim construction, tubeless ready with tape and valves included Item Specifications Color Carbon Black Defined Color Carbon Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rim Material Carbon Rim Width (Internal) 29 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 29" RaceFace Era SL Front Wheel Front Wheel UPC: 821973509969 MPN: 944-00-118

by RaceFace

—$2,199

Developed and tested using Turbulent Aero technology, the 42/49 is designed for everything you do, providing all-day capability with aerodynamic sensibilities. Raced at events as varied as the Paris-Roubaix and the Giro D'Italia, the 42/49 wheels have a lifetime warranty supported by a no-fault crash replacement. And in keeping with Reserve workmanlike ways, you'll find external nipples, standard spokes, no tire limitations with a semi-hooked design and no rider weight limits. Built with DT Swiss Hubs Wind tunnel tested using Computational Fluid Dynamics (CFD), with the goal of maximizing aerodynamics while enhancing stability Optimized carbon fiber rim construction allows Reserve to define the exact fiber orientation for each rim model, to maximize stiffness and strength without sacrificing weight Item Specifications Cassette Body Type Shimano HG 11/12-Speed Road Color Carbon Defined Color Black Front Axle 12mm Thru x 100mm Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 142mm Rim Material Carbon Rim Width (Internal) 24.8 Rim Width (Internal) 25.4 Tire Type Tubeless Ready Valve Presta Wheel Size 700c Reserve Wheels Reserve 42/49 Turbulent Aero Wheelset Wheelset UPC: 192219464220 MPN: 89-25204

by Reserve Wheels