• Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering
• S is for steel, in this case the spokes. A high-performance 28h hub and conventional J-bend spokes
• 2-Year Warranty coverage against defects on your Industry Nine wheelset or Classic hubset

• Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering
• S is for steel, in this case the spokes. A high-performance 28h hub and conventional J-bend spokes
• 2-Year Warranty coverage against defects on your Industry Nine wheelset or Classic hubset

• Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering
• S is for steel, in this case the spokes. A high-performance 28h hub and conventional J-bend spokes
• 2-Year Warranty coverage against defects on your Industry Nine wheelset or Classic hubset

Berd Hawk27 Wheels with Industry Nine Hydra Hubs

Berd’s new Hawk27 are ideal for cross country and trail racing and riding, the new Hawk27 wheels combine lightweight and vibration damping Berd spokes with 27mm internal carbon rims. The Hawk27 wheels are made entirely in North America, with Berd’s spokes being made in the USA and the carbon rim being made by We Are One Composites in Canada all wrapped around an Industry Nine Hydra hub, also made in the USA.

The Hawk27 rims are only 18mm deep, which are the lowest profile 27mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd’s new rims spread out tire/rim impacts across a larger surface area to prevent tire damage during acute impacts. The Hawk27 wheelset is built around black Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability, along with remarkably low weight.

Technical Specifications:

• Wheelset Weight: 1375g (Includes rim tape and valves)
• Internal Rim Width: 27 mm
• Rim Size: 29"
• Spoke Count: 28h (Front and Rear)
• Hub Model: Industry Nine Hydra
• Hub Spacing: 148 Boost / 110 Front Boost
• Disc Brake Type: Centerlock
• Tire Compatibility: 2.1" - 2.7"
• Tubeless Ready: Black Berd rim tape and Stans No Tubes valves installed
• Maximum Tire Pressure: 45 PSI
• Warranty: Berd's 5 Year Limited Warranty

• Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering
• S is for steel, in this case the spokes. A high-performance 28h hub and conventional J-bend spokes
• 2-Year Warranty coverage against defects on your Industry Nine wheelset or Classic hubset

EN355 is a wheelset designed from the ground up for riders looking to utilize modern, wide aggressive all-mountain tires. Like it’s skinnier sibling, the EN315, the EN355 is ready for any terrain but wide enough to support the latest generation of off-road rubber allowing greater traction and control via an increased contact patch. No compromises are made to deliver this all-mountain wheelset - built on our 32h Hydra system chassis, EN355 conquers any phase of the ride but shines when the trail gets steep.

There’s only one way to sum up EN315 - category-defying. A gladiator crossed with a gymnast, this true all-mountain wheelset is at home in any stage of your most demanding rides. Whether railing through a switchback or hucking to a blind landing, EN315 always keeps pace. When laced to our 24h Hydra chassis, the ride quality comes alive with the perfect mix of agility, compliance and telepathic manners when the going gets rough.

Your race calendar is starting to fill up, but you’ve also got a bucket list trip to Moab on the horizon - limit your worries to keeping your GPS charged, not your wheelset. A true do it all option, the TR280 wheelset was conceived as a gravity-capable wheelset on a diet. If your riding style is more along the lines of "point and pray," TR280 laced to our 32h Hydra system chassis will have your back when things get sketchy. The TR280 32h is synonymous with all day, everyday riding that'll see equal climbing and descending.

Fastest XC Wheels In the Real World 1240 grams is an obscenely light weight when talking about mountain bike wheelsets, the kind of weight that XC racers dream about. But light weight alone is no longer enough. So, we engineered the new Control SL wheels to be sharp handling, smooth riding, extra durable, and 22% less likely to pinch-flat your tires, in addition to being some of the lightest weight production wheels on the planet.

• Bearing Type: SiNC Ceramic Sealed cartridge
• Front Hub: Alloy body, 15mmx110 thru-axle, 19 and 31mm OD end cap options included. Max Rotor Size <200mm
• Front Spoke Pattern: DT Swiss Aerolite Straightpull 294mm, 24-hole, Two-cross
• Nipple Type: DT Swiss Pro Lock Hexagonal Alloy 14mm 2.0mm
• Rear Hub: CNC-machined alloy body, SiNC Ceramic Bearings, premium-quality DT 180 internals and 36t quick engagement ratchet system cassette, includes Shimano 12-Spd MicroSpline freehub and 148 end caps. Max Rotor Size <200mm
• Rear Spoke Pattern:DT Swiss Aerolite Straightpull 294mm, 24-hole, Two-cross
• Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook 4mm FlatTop design. Not compatible with tire inserts.
• Rim Width: 29mm internal
• System Weight Limit: 275lbs / 125kg
• Total Wheelset Weight: 1240g

If your idea of “fun” is going cross-eyed on a climb or tracking your FTP throughout the course of a season, we have the wheelset to match your mindset. We share your obsession over every detail to accomplish the goal of making the UL280 the best XC race wheelset available - the instantly-engaging 24 hole Hydra chassis wrapped in a 370g rim screams speed and looks fantastic doing it. When crossing the finish line first is the primary goal, the UL280 is your wheelset.

There’s only one way to sum up EN315 - category-defying. A gladiator crossed with a gymnast, this true all-mountain wheelset is at home in any stage of your most demanding rides. Whether railing through a switchback or hucking to a blind landing, EN315 always keeps pace. Built on our Hydra 32h chassis, the EN315 places emphasis on rowdy-readiness while still being light enough to pedal all day.

The crew over at Revel Bikes designed this new carbon-like rim called the RW30. That's right, it's not your traditional carbon fiber, the material is called Fusion-Fiber™.Until now, carbon wheels and just about all carbon bike parts were made of pre-preg carbon fiber with epoxy and then hand laid into a rim mold.The epoxy component is what not only makes the process harmful to workers but it also makes it nearly impossible to recycle once the life of the carbon part is over.

From a performance standpoint, the Fusion-Fiber™ material has a strength to weight ratio better than traditional carbon fiber.Because of this,Revelhas been able to make an equally, if not stronger, rim than competitors while coming in quite a bit lighter than the rest.

The Revel RW30 rims are available as a rim only for $700, as well as two wheelset options using Industry Nine hubs. The RW30 laced to the Industry Nine 1/1 hub is $1975 and the Industry Nine Hydra hub option is $2200.

Specifications

• Wheel Size: 29"
• Front Hub Spacing: 15x110mm
• Rear Hub Spacing: 12x148mm
• Hub Model: Industry Nine Hydra
• Freehub: SRAM XD
• Hole Count: 28
• Brake Type: 6 Bolt
• External Rim Width: 35mm
• Internal Rim Width: 29mm
• ERD: 590mm
• Recommended Tire Width: 2.3" - 2.6"
• Wheelset Weight: 1840g
• Lifetime Warranty
• 100% Recyclable

To follow up on the RW30 that the Revel Bikes crew released last year, the RW27 takes what we love about the RW30 and makes it a bit lighter and faster for narrow tires. Still using the Fusion-Fiber™ that makes the RW30 so unique. That's right, it's not your traditional carbon fiber, until now, carbon wheels and just about all carbon bike parts were made of pre-preg carbon fiber with epoxy and then hand laid into a rim mold. The epoxy component is what not only makes the process harmful to workers but it also makes it nearly impossible to recycle once the life of the carbon part is over.

From a performance standpoint, the Fusion-Fiber™ material has a strength to weight ratio better than traditional carbon fiber. Because of this, Revel has been able to make an equally, if not stronger, rim than competitors while coming in quite a bit lighter than the rest.

The Revel RW27 rims are available as a rim only for $700, as well as two wheelset options using Industry Nine hubs. The RW27 laced to the Industry Nine 1/1 hub is $1975 and the Industry Nine Hydra hub option is $2200.

Specifications

• Wheel Size: 29"
• Front Hub Spacing: 15x110mm
• Rear Hub Spacing: 12x148mm
• Hub Model: Industry Nine Hydra
• Freehub: SRAM XD
• Hole Count: 28
• Brake Type: 6 Bolt
• External Rim Width: 33mm
• Internal Rim Width: 27mm
• ERD: 592mm
• Recommended Tire Width: 2.2" - 2.5"
• Wheelset Weight: 1749g (I9 Hydra)
• Wheelset Weight: 1758g (I9 1/1)
• Lifetime Warranty
• 100% Recyclable

Your race calendar is starting to fill up, but you’ve also got a bucket list trip to Moab on the horizon - limit your worries to keeping your GPS charged, not your wheelset. A true do it all option, the TR280 wheelset was conceived as a gravity-capable wheelset on a diet. If your riding style is more along the lines of "point and pray," TR280 laced to our 32h Hydra system chassis will have your back when things get sketchy. The TR280 32h is synonymous with all day, everyday riding that'll see equal climbing and descending.

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN.

Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims.

The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue.

With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts.

The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability.

These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs.

Specifications

• Wheel Size: 29"
• Front Hub Spacing: 15x110mm
• Rear Hub Spacing: 12x148mm
• Hub Model: I9 Hydra
• Freehub: Microspline
• Hole Count: 28
• Brake Type: Centerlock
• External Rim Width: 37.5mm
• Internal Rim Width: 30mm
• Recommended Tire Width: 2.2" - 2.5"
• Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams
• Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed
• Suggested Weight Limit: 280 lbs
• Lifetime Warranty

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN.

Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims.

The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue.

With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts.

The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability.

These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs.

Specifications

• Wheel Size: 29"
• Front Hub Spacing: 15x110mm
• Rear Hub Spacing: 12x148mm
• Hub Model: I9 Hydra
• Freehub: Microspline
• Hole Count: 28
• Brake Type: Centerlock
• External Rim Width: 37.5mm
• Internal Rim Width: 30mm
• Recommended Tire Width: 2.2" - 2.5"
• Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams
• Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed
• Suggested Weight Limit: 280 lbs
• Lifetime Warranty

Berd Hawk27 Wheels with I9 Solix Hubs

Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN.

Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims.

The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue.

With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts.

The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub.

HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs.

These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs.

Technical Specifications:

• Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams
• Internal Rim Width: 27 mm
• Rim Size: 29"
• Spoke Count: 28h (Front and Rear)
• Hub Model: I9 Solix
• Hub Spacing: 148 Boost / 110 Front Boost
• Disc Brake Type: Centerlock
• Tire Compatibility: 2.1" - 2.7"
• Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed
• Maximum Tire Pressure: 45 PSI
• Warranty: Berd's 5 Year Limited Warranty
• Suggested Weight Limit: 280 lbs