Tools / Lube / Solvents

—$15.84

KMC Missing Link Opener KMC Missing Link Opener Chain Tool Chain Tool UPC: 766759000035

by KMC

—$72.95

Securely holds the TS-4.2 Professional Wheel Truing Stand and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height. Features a wide, sturdy base, small parts compartments, spoke wrench holders, and is constructed of a durable composite material. Fits Park Tool TS-4.2 Professional Wheel Truing Stand Features a wide, sturdy base Includes a compartment designed to hold small parts while you work Spoke wrench holders Constructed of a durable composite material Footprint approximately 17.5" x 12.75" (44.5 x 32.4cm) with TS-4.2 installed Park Tool TSB-4.2 Tilting Truing Stand Base Truing Stand Accessory UPC: 763477008336

by Park Tool

—$9.95

These cone wrenches are designed for the home mechanic or occasional user. Made of thin steel and are nickel plated and heat treated for long use Small tool size to carry along for quick repairs Park Tool Double-Ended Cone Wrench Cone Wrench UPC: 763477002792

by Park Tool

—$34.95

WTK-2 Essential Tool Kit Includes 2 TL-1.2 Tire Levers, AWS-9.2 Fold up Hex Set, 2 TB-2 Tire Boots and GP-2 Patch Kit Packaged in convenient nylon carrying case Park Tool WTK-2 Tool Kit UPC: 763477009210

by Park Tool

—$11.99

Formulated for bearings, this grease sticks and strings like a triple cheese pizza. Will not migrate away from bearing surfaces Things run smoother and water will not be washing this grease out Item Specifications Ounces 4fl oz Rock-N-Roll Super-Web Grease Grease UPC: 851880001096

by Rock-N-Roll

—$12.90

White Lightning Epic Ride is an excellent all-conditions bicycle lubricant that satisfies the demands of road and off-road cyclists.Light synthetic lube, all-conditions Item Specifications Ounces 4fl oz White Lightning Epic Ride Bike Chain Lube Lubricant UPC: 610990001002

by White Lightning

—$18.95

Park Repair Stand Accessories Durable Nylon tray with slots and dividers is ideal for holding small parts and tools Features deep sides and a variety of slots and holes to securely hold tools Tray uses a shim to fit tubes of 1-1/2" (38mm); Without the shim it will fit tubes 1-5/8" (41mm) Intend for stands with a vertical upright tube Fits all Park Tool Repair Stands except PRS-2 OS, PRS-3 OS, and PRS-4 OS, and PRS-15 Park Tool Stand Accessories Repair Stand Accessory UPC: 763477005403

by Park Tool

—$25.95

Professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit. 6mm Sliding T-Handle Hex Wrench Carefully selected combination of Chrome Vanadium and S-2 tool steels Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless Machined, chamfered tips allow easier insertion into hex fittings Integrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy Sliding T-handle creates increased leverage and multiple access positions Item Specifications Ball End No Set or Individual Individual Style T-Handle Tip Size 6mm Hex Park Tool THH Sliding Hex Wrench Hex Wrench UPC: 763477009456

by Park Tool

—$37.50

Wheels Manufacturing Bushing Removal Tools Fits: 1/2", 10mm & 12mm eyelets Includes bushing drifts and support sleeve with foot Replacement bushings available direct from Wheels Manufacturing Wheels Manufacturing Bushing Removal Tool Suspension Tool UPC: 836572007198

by Wheels Manufacturing

—$17.95

Self-Extracting crank cap toolInvestment cast steel construction with 8mm hex key for better leverage Park Tool Crank Cap Tools Crank Arm Tool UPC: 763477000798

by Park Tool

—$18.49

Quickly cleans without damage to plastic, rubber or carbon components. Strong enough for the grimiest metal parts and safe for parts with rubber O-rings and seals, urethane elastomers, and painted surfaces. Strong and Safe biodegradable formula that is safe for use with all plastic, rubber and carbon fiber parts Non-toxic, made using a soy-based extract Can be diluted with water for less difficult cleaning jobs Item Specifications Application Type Drip Case Pack No Petroleum Based Yes Finish Line EcoTech Degreaser Degreaser / Cleaner UPC: 036121710375

by Finish Line

—$19.95

Mini folding, multi-tools keep bolts tight while still being small enough to fit into a jersey pocket. Material Construction: Extruded Aluminum frame with hardened steel tools Smooth tool edges won't snag jersey pockets Topeak Mini 6 Multitool Bike Multi-Tool UPC: 768661117450

by Topeak

—$20.99

Keep your chain fresher than ever with our advanced Dry Chain Degreaser. It makes light work of oil build up, grease and grime, without the need for rinsing. Its unique dry 'zero residue' formula means that after cleaning, it evaporates to leave the area as clean as can be, with no residue. It rips right through the toughest grime, including waterproof grease and chain lube. New high-pressure turbo spray Easily cuts through tough grease in seconds No rinse, heavy duty formula Can be used on chains, gears and individual components Works on the tough waterproof grease and chain wax Item Specifications Application Type Aerosol Muc-Off High Pressure Quick Drying Chain Degreaser Degreaser / Cleaner EAN: 5037835209242

by Muc-Off

—$29.99

The Lezyne Tubeless Insert Kit is a stealth-mounted tubeless tire repair kit that discretely and securely inserts into the opening of a bicycle handlebar. It's constructed from lightweight, durable machined aluminum and features a hardened stainless-steel reamer. The kit is easily accessible for quick tire repairs and comes with five high quality tubeless plugs that can also be stored inside its body. It also doubles as a bar-end plug, and comes with three differently sized O-ring fasteners to ensure a secure fit inside most handlebar openingsIncluded: 5 tire plugs, combined tire reamer and insertion tool Lezyne Tubeless Bar End Mount Tool Tubeless Patch Kit EAN: 4710582542916

by Lezyne

—$116

Eyelet Roller Bearing Tool for installation and removal of the Eyelet Roller Bearing Kit. FOX Eyelet Roller Bearing Tool Suspension Tool UPC: 611056187319

by FOX

—$29.99

The ultimate trailside companion - these high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold. Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm Screwdrivers : phillips #2, flat #2 Torx : t-25 Chain tool : 8/9/10 speed compatible Spoke wrench : #0, 1, 2 & 3 Open wrench : 8 & 10mm Lifetime Warranty Item Specifications Chain Tool Yes Number of Tools 17 Style Folding Crank Brothers Multi-Tools Bike Multi-Tool UPC: 641300159601

by Crank Brothers

—$63.95

Park Truing stand accessories to keep your current stand working correctly or updating to newer wheel standards. Park Tool Truing Stand Accessories Truing Stand Accessory UPC: 763477008671

by Park Tool

—$47

The fork Seal Driver design allows preloading of both flanged and flangeless fork seals. Guide bushing and seal stop design ensures 100% alignment of new generation flangeless seals each and every time without the guess work! Great for both the DIY and professional mechanic. Machined from High-Strength Black Acetyl Flanged and Flangeless ends Works with both Flanged and Flangeless fork seals Locates into fork bushing for perfect alignment Sits above fork brace when installed for extra protection PUSH Industries Fork Seal Installation Tool Suspension Tool UPC: 840031600769

by PUSH Industries

—$89.22

Squorx nipple drivers for wheelbuilding and servicing DT wheels with Squorx nipples (Spline One). DT Swiss Squorx Nipple Drivers Spoke Wrench EAN: 7630033861274

by DT Swiss

—$12.89

Park Tool hex tools are made from high torque industrial steel and through hardened for long life. Item Specifications Type L Wrench Tip Size 12.0mm Park Tool Hex Wrenches Hex Wrench UPC: 763477004369

by Park Tool

—$47

The fork Seal Driver design allows preloading of both flanged and flangeless fork seals. Guide bushing and seal stop design ensures 100% alignment of new generation flangeless seals each and every time without the guess work! Great for both the DIY and professional mechanic. Machined from High-Strength Black Acetyl Flanged and Flangeless ends Works with both Flanged and Flangeless fork seals Locates into fork bushing for perfect alignment Sits above fork brace when installed for extra protection PUSH Industries Fork Seal Installation Tool Suspension Tool UPC: 840031605788

by PUSH Industries

—$65.95

Park Truing Stand parts to get truing stands back into tip-top working condition. Park Tool Truing Stand Parts Truing Stand Part UPC: 763477008343

by Park Tool

—$579.95

The Park Tool TS-4.2 Professional Wheel Truing Stand is designed to fit a wide range of hub, wheel and tire combinations with room to spare, utilizing a wider base structure and larger calipers. More accurate and easier to calibrate, the versatile TS-4.2 is solidly built to accommodate and self-center nearly any diameter wheel 16" to 29" and any tire width up to 5"+. Both uprights move simultaneously to always keep wheel centered in the stand Accommodates tire widths up to 5"+ with or without brake rotor mounted Speed knob to quickly change axle widths Accommodates hub widths from 75mm to over 250mm Precise operation and adjustability Precise accuracy, operation and adjustability Built in thru-axle adaptors Chrome plated and powder coated heavy gauge steel construction Removable, replaceable nylon caliper tips to protect painted/anodized rims Park Tool TS-4.2 Professional Wheel Truing Stand Truing Stand UPC: 763477008268

by Park Tool

—$23.95

Park Tool Hex wrenches made from industrial tool steel, hardened and tempered for shop use. Available in Y, L-Shape and folding versions Wall Mount does not include Hex Tools but is marked for sizes 2, 2.5, 3, 4, 5, 6, 8 & 10mm Y-Wrenchs not included but easily fit into base of holder Park Tool Hex Wrenches Hex Wrench UPC: 763477003669

by Park Tool

—$13.95

Rear shock tools for repair and maintenance of Rockshox rear shocks. RockShox Rear Shock Tools Suspension Tool UPC: 710845801631

by RockShox

—$109.95

High quality tools ensure that headsets are properly serviced. Includes: one universal setting tube, three 1" inserts, and three 1-1/8" inserts Works on forks of 340mm column length or less By using different inserts to ensure proper fit on the race, the bearing surface is spared damage The CRS-1 services in SHIS sizes 26, 27, 30 Park Tool Headset Tools Headset Tool UPC: 763477002181

by Park Tool

—$11.95

Tools designed by Park Tool to service Bottom Brackets. Uses a 1" hex shape Fits the splined 12-tooth Campagnolo bottom bracket cups found on the square type spindle systems (Record, Chorus, Centaur and Athena) Removes and installs Campagnolo cassette lockrings including 11 speed Park Tool BBT Series Bottom Bracket Tool UPC: 763477003515

by Park Tool

—$17.68

The Rotor Truing Fork 2.0 can eliminate warped disc rotors with two different tuning depths. It is a great solution for the shop, or while traveling. Deep, 2mm truing slot plus shallow 2.0mm and 2.3mm slots for different rotor depths Strong steel core with overmolded nylon surface Angled design promotes ample spoke clearance and efficient leverage Tapered tip can double as a brake pad piston press Non-marking nylon rotor truing surfaces Feedback Sports Rotor Truing Fork 2.0 Brake Tool UPC: 817966011373

by Feedback Sports

—$472.95

The PRS-26 incorporates proven features from our other Team Issue stands to produce a strong, lightweight repair stand that's at home on-the-go or in the race pits. The sturdy tripod leg design folds and unfolds quickly and easily, and provides stability on any surface. The clamp is height-adjustable from 97 to 147 cm (38" to 58"), and can be positioned over one leg or between two legs to accommodate any bike. Precisely constructed from anodized 6063 T6 lightweight aluminum and durable composites, the PRS-26 is our lightest full-featured repair stand, and folds compactly for storage or transport. The PRS-26 is equipped with the time-tested 100-25D Micro-Adjust Clamp, the same design featured on our shop repair stands. The 100-25D features narrow clamping jaws to fit into tight areas or on short seat posts, and clamps nearly any tube from 23 to 76 mm (7/8" to 3"), including aero tubes and dropper posts. The cam-actuated adjustment system allows for quick entry, adjustment and exit. Maximum weight capacity*: 36 kg (80 lbs.) Clamp capacity: round and aero tubes from 22 to 76 mm (7/8" to 3") wide Jaw width: 70 mm (2.75") Height adjustable from 97 to 147 cm (38" to 58") Base when open forms a triangle of 126 x 126 x 126 cm (49.6" x 49.6" x 49.6") Weight: 5.7 kg (12.6 lbs.) The PRS-26 uses the 100-25D Micro-Adjust Clamp Replaceable jaw covers (part #1960) Item Specifications Clamp Style Seatpost Stand Style Folding Park Tool PRS-26 Team Issue Repair Stand Repair Stands UPC: 763477009647

by Park Tool

—$18.95

Specially designed brushes for cleaning hard to reach areas on most bicycles.Includes two rotating brushes, two sponges and two wicking pads already installed in a composite cartridge, ready to snap into the CM-25 Professional Chain Scrubbe Park Tool Brushes and Cleaning Tools Cleaning Tool UPC: 763477006417

by Park Tool

—$16.95

Park Tool offers a variety of high quality spoke wrenches that are built to last. Double ended Spoke wrench for select Mavic wheels Smaller end fits 7-spline nipples with a 6.4mm outside diameter Larger end fits 6-spline FORE rim adapters with a 9mm outside diameter Item Specifications Tip Size Mavic Park Tool Spoke Wrenches Spoke Wrench UPC: 763477007469

by Park Tool

—$15.95

Park Tool offers a variety of high quality spoke wrenches that are built to last. Comfortable, vinyl dipped, two-sided spoke wrench is designed to easily access Mavic fittings, including the Mavic SSC Ksyrium and Crossmax SLR wheels The smaller end fits the 6-spline integrated nipples with 5.5mm OD splines, and 7mm thread size nipple The larger end fits the 6-spline 9mm OD of the threaded eyelets of the "FORE drilled rim adapters" found on rims such as the Mavic XM819, EX823 and Speedcity wheels Will not work on Mavic R-Sys wheels Item Specifications Tip Size Mavic Park Tool Spoke Wrenches Spoke Wrench UPC: 763477007438

by Park Tool

—$11.89

Finish Line Wet Lube is an "extreme" lube; super durable high viscosity synthetic oils, special polymers, anti-wear additives, friction modifiers, and more, all combine to make this Finish Line's strongest, longest lasting, most water resistant lubricant. Wet Lube goes on Wet and stays Wet on the chain. Recommended for long-distance riding and extreme weather conditions. Use Wet Lube when you ride hard and long. Proven performance for 100-plus mile rides, muddy off-road conditions, long rainy commutes, and foggy salt-air coastal climates. A heavier, Wet-style lubricant that delivers the ultimate in lubricity and protection. A wet-style lube that goes on wet and stays wet, for maximum performance in wet weather and over long distances For hi-torque pedaling over ultra-long distances Totally repels water Item Specifications Ounces 2fl oz Finish Line WET Bike Chain Lube Lubricant UPC: 036121163003

by Finish Line

—$12.10

Finish Line's 1-Step is perfect for commuters and recreational cyclists who seek a quick one-step clean and lube formulation. As 1-Step loosens and removes surface grime, it delivers a clean low friction film of lubricant. 1-Step Cleaner & Lubricant prevents premature component wear while reducing pedaling friction and drive-train noise. A light wet-style lubricant that penetrates and flushes old lube and contaminants out with each new application Fast and easy, cleans and lubes in one step Whenever chain is dry or dirty, just apply and you're ready to go ride Provides maximum rust protection to make this the perfect lube for occasional cyclists and bikes often put into storage Item Specifications Ounces 4fl oz Finish Line 1-Step Cleaner and Bike Chain Lube Lubricant UPC: 036121005037

by Finish Line

—$12.49

Park Tool offers a wide variety of high quality Torx Wrenches for the home or shop mechanic. Made from through-hardened, high torque industrial steel for long life and precision fit Offset P-handle made from durable nylon and ergonomically designed for comfortable use Item Specifications Type P Handle Tip Size T10 Park Tool Torx Wrenches Torx Wrench UPC: 763477010049

by Park Tool

—$29.99

The Air-liner tool will make the installation and removal of your tubeless tires and liners, easy and quick. The patented plier design provides a gentle yet secure grip on the tire, which is needed when removing the tire bead from the rim. This creates space for the included clips to be inserted between the tire and rim. Additionally, the handles of the pliers are designed to be used as tire levers, during mounting and dismounting, and are designed to prevent damage to the rim and tire. The Air-liner tool is necessary for the Air-Liner removal from your wheel. Contains one pair of pliers and universal tire levers Not approved for use with hookless rims Compatible with MTB tires Vittoria Air-liner Tool Tool Kit EAN: 8022530029957

by Vittoria

—$14.90

The new Muc-Off All-Weather Chain Lube is an all-round, synthetic based lubricant. The unique blend of renewable and readily biodegradable ingredients formula penetrates deep into the chain links, to create a durable, protective coating which guards against the elements and metal-to-metal wear. Formulated using organic friction modifiers ensures the lube can stand up to even the toughest of rides, reducing friction and providing lubrication for long-distance on and off-road, in all conditions. Can be applied to chain, cables, shifters, derailleurs, pedals and cleats Pipette system for easy application Derived from renewable sources Readily Biodegradable Petroleum, and PFC free Item Specifications Application Type Drip Case Pack No Petroleum Based No Muc-Off All Weather Lube Lubricant EAN: 5037835216097

by Muc-Off

—$15

Steel Core Tire Levers have a hardened CRV tool steel center to prevent flex and breakage. And when getting your tire off is an extra big chore, each lever has a spoke attachment to help you get maximum leverage and secure removal. Add to this an additional polymer tab to properly spread hydraulic disc brake pads and you have a true roadside or trail side 2-in-1 companion. High-density polymer protects your rim and promotes smooth tire bead removal Spoke hook on each lever High-density polymer protects your rim and promotes smooth tire bead removal Extra-long polymer tab to properly spread hydraulic disc brake pads Slide-fit system keeps the tire tool pair securely together Item Specifications Case Pack No Feedback Sports Tire Lever Tire Lever UPC: 817966010840

by Feedback Sports

—$24.99

Finish Line Shock Oil Suspension Fluid is Premium suspension fluid formulated specifically for all oil damped bicycle forks. 100% compatible with all suspension designs and seals. A semi-synthetic oil formulation that has become the top choice of professionals worldwide. Will not thicken or thin due to changes in temperature. Low foam technology delivers consistent and predictable damping in all riding conditions. Race proven to deliver superior performance in all suspension systems. A super high viscosity index of over 235 provides consistent damping through the longest and most extreme of riding conditions. Premium suspension fluid formulated specifically for all oil damped bicycle forks 100% compatible with all suspension designs and seals Will not thicken or thin due to changes in temperature Low foam technology delivers consistent and predictable damping in all riding conditions Race proven to deliver superior performance in all suspension systems Combines reliability of mineral oils with durability of synthetic oils Prevents stiction and viscosity breakdown Won't foam - provides consistent and predictable damping Item Specifications Ounces 16fl oz Fork Oil Weight 5 Finish Line Shock Oil Suspension Oil and Lube UPC: 036121700116

by Finish Line

—$19.99

The ultimate trailside companion - these high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold. Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm Screwdrivers : phillips #2, flat #2 Torx : t-25 Length is 89mm, Weight is 124g Lifetime Warranty Item Specifications Chain Tool No Number of Tools 10 Style Folding Crank Brothers Multi-Tools Bike Multi-Tool UPC: 641300161949

by Crank Brothers

—$11.45

Latex-free and coated in polyurethane that seals out grease, oil and grime. The textured surface on the palm-side of the glove provides enhancing grip, making it easier handling small parts. Reusable and long lasting. Breathable upper fabric keeps hands cool and dry Designed to last for many weeks of heavy use Item Specifications keyword search Gloves, Mechanic Gloves Finish Line Mechanic's Grip Gloves Miscellaneous Shop Supply UPC: 036121710535

by Finish Line

—$10.25

Shimano Chainring Nut Wrench with dustcap tool. Shimano Chainring Nut Wrench Chainring Tool UPC: 689228228818

by Shimano

—$13.09

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006264

by Park Tool

—$10.49

Park Tool DW-2 Clutch Wrench. DW-2 is a small, thin wrench with 5.5mm and 3mm openings designed to fit the rear derailleur clutch tension adjuster on Shimano XT, SLX, Deore, Saint and Zee rear Shadow Plus (+) derailleurs and all previous Shadow Plus models.5.5mm and 3mm openings Park Tool DW-2 Clutch Wrench Other Tool UPC: 763477002945

by Park Tool

—$33.99

The Wheels MFG Centerlock Socket is designed to create a tight grip on a standard 44mm Centerlock Rotor Lockring to avoid slipping while torquing lockrings onto Centerlock Hubs. Designed to be used with a 3/8" drive socket or torque wrench for easy installation and removal. The socket can also be used with 3/8" ACME threaded press rods and adjustable press stop mini to prevent slipping. (Not Included). Precision machined 6061 aluminum Anodized red 3/8" drive interface Wheels Manufacturing Centerlock Socket Tool Other Hub Tool UPC: 811079029553

by Wheels Manufacturing

—$47.95

Bottom brackets have some of the highest torque specs of any component found on a bicycle. Despite this, some bottom bracket cups feature tool fittings that allow mere millimeters of engagement, which can be a problem when attempting removal or installation. Solution: the Park Tool Bottom Bracket Tool Retaining System. Used in conjunction with nearly any Park Tool bottom bracket tool, the BBT-RS uses a spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. The BBT-RS can be configured for use with the vast majority of threaded and thread-together bottom bracket standards. The BBT-RS features an M8 threaded rod and a double-sided adapter nut with M12 and M15 threads, allowing it to thread directly into any compatible cartridge bottom bracket. The M15 adapter can also be used to install any of Park Tool's nine aluminum bottom bracket tools, all of which feature integrated threading for use with the BBT-RS. Washer diameter: 57 mm (2.25") Rod length: 175 mm (6.9") Rod threading: M8 x 1.0 Adapter nut threading: M12 x 1.0 & M15 x 1.0 Park Tool BBT-RS Bottom Bracket Tool Retaining System Bottom Bracket Tool UPC: 763477001603

by Park Tool

—$39.99

When OneUp came out with the EDC tool it changed the game for tool storage on your bike. Now, with the threadless carrier, you can switch over from the original threaded steerer option, or get that EDC hidden if you've got it externally mounted. If you don't have an EDC tool, don't worry, we sell those here too! The EDC Threadless carrier is the stealthiest way to have a full size OneUp EDC tool sitting nicely inside your steerer tube. If you thought the EDC Lite wasn't quite enough, this is the setup for you that fits all the essential tools inside your steerer tube! All you need to do is remove your star nut by knocking it all the way down the steerer, drop in and thread from the bottom. Just make sure to tension your headset properly! Features Compatible with the EDC V2 Tool *not included If you don't have an EDC tool, Click Here to complete your ultimate EDC kit! The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool) Easy to install in less than 5 mins. Color matched in anodize to OneUp Composite Pedals, Grips and Handlebar Decals! Keeps mud and debris out of the bottom of your steerer. **Needed Steerer tube length Ensure your fork is compatible - Very Important Incompatible forks: Fox 38 with oval steerer (Use a EDC Threaded install), Giant Overdrive 2 Forks. Cannondale Lefty Forks. Carbon Steerers **Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement. Fox (NO Fox 38) = 190mm min RockShox Forks = 220-265mm OneUp EDC Threadless Carrier Bike Multi-Tool EAN: 0050062821945

by OneUp

—$24.99

Finish Line Shock Oil Suspension Fluid is Premium suspension fluid formulated specifically for all oil damped bicycle forks. 100% compatible with all suspension designs and seals. A semi-synthetic oil formulation that has become the top choice of professionals worldwide. Will not thicken or thin due to changes in temperature. Low foam technology delivers consistent and predictable damping in all riding conditions. Race proven to deliver superior performance in all suspension systems. A super high viscosity index of over 235 provides consistent damping through the longest and most extreme of riding conditions. Premium suspension fluid formulated specifically for all oil damped bicycle forks 100% compatible with all suspension designs and seals Will not thicken or thin due to changes in temperature Low foam technology delivers consistent and predictable damping in all riding conditions Race proven to deliver superior performance in all suspension systems Combines reliability of mineral oils with durability of synthetic oils Prevents stiction and viscosity breakdown Won't foam - provides consistent and predictable damping Item Specifications Ounces 16fl oz Fork Oil Weight 2.5 Finish Line Shock Oil Suspension Oil and Lube UPC: 036121700109

by Finish Line

—$74.95

Nano Torqbar X Torque Wrench is a compact, easy to use and read torque wrench provides correct tightening of bolts on frame and component bolts to recommended torque values for safety and performance. Two of your favorite bits can be carried in the handle of the Nano TorqBar X for immediate use and even greater portability during rides. Torque range: 2-6 Nm. Aluminum / Engineering grade polymer Integrated compartment for two bits, Carry case Includes: 3, 4, 5mm hex bits, T20, and T25 Torx bits, and carry case Item Specifications Bit Size 3mm Hex,4mm Hex,5mm Hex,T20,T26 Bits Included Yes Topeak Nano Torqbar X Torque Wrench UPC: 883466017405

by Topeak

—$61.95

Accessories and add-ons to hop up and specialize Park Tool repair stands.Designed to allow any Park Tool PRS-20, PRS-21 or PRS-23 Repair Stand to accept 12mm and 15mm thru axle wheeled bikes with 100mm dropout spacing Park Tool Stand Accessories Repair Stand Accessory UPC: 763477015266

by Park Tool