Tools / Lube / Solvents

—$25.99

RockShox Suspension Seal Installation Tools.Works on New Boxxer, Lyrik, and Domain Item Specifications Manufacturer Number 114015206000 RockShox Suspension Fork Tools Suspension Tool UPC: 710845312380

by RockShox

—$13.99

RockShox Suspension Tools RockShox Rear Shock Tools Suspension Tool UPC: 710845663246

by RockShox

—$29.99

Rock "N" Roll Extreme bike lube, the self proclaimed King of Lube! You be the judge! The Extreme lube is sure to keep your chain performing at it's best in the worst conditions. Designed to keep your chain well lubricated no matter how much dust, mud or water you get exposed to. Rain, Slop & Dust. This stuff is a must. When the going gets tough this is the stuff. Keeps your drive train clean, quiet and super smooth. A few Tips Put the chain on the big ring in the front, and the small cog on the back. Apply the lube on the chain, over the top of the cog. Let a nice flow of lube go onto the chain (don’t be cheap). Remember you’re going to clean and lube the chain in one step. Freewheel the chain backwards, and wipe off all of the dirt and grit that comes up to the surface of the chain. Keep in mind, you can’t wipe off the chain too much, so make that chain shine! Shift the chain off the big ring, so you can wipe off the chain ring, to clean up the little bit of residue left behind. For best results, allow your chain to sit a few hours or lube the night before. However, if right after lubing, you have to ride, you have to ride, so go for it. Giving the lube a chance to set gives the lube a bit more life by allowing the protective membrane to fully set-up. Remember, to wipe off you chain after riding regardless if you’re going to re-lube or not. This keeps the chain clean and looking great! Rock-N-Roll Extreme Bike Chain Lube Lubricant UPC: 851880001041

by Rock-N-Roll

—$24.99

This classic pink Bike Cleaner has incredible cleaning power because it contains Nano Technology that breaks down dirt and grime on microscopic levels, while also caring for your bike's delicate finish. Muc-off's pink cleaner is biodegradable, free from acids, CFC's and solvents, and it's alkaline based so you can clean away with a guilt-free conscience. It's safe on all surfaces, and it's even disc brake rotor and pad friendly. Safe on all parts and surfaces including carbon fiber Will not harm seals, cables, brake pads or rotors Effective road bike & mountain bike cleaner Safe on anodized metal Alkaline based and free from CFCs, solvents or acids Nano Tech Formula cleans on a molecular level Biodegradable Item Specifications Application Type Spray Case Pack No Muc-Off Nano Tech Cycle Cleaner Degreaser / Cleaner EAN: 5037835904000

by Muc-Off

—$10.25

Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement. Fits SRAM Guide, Trail and Avid Code Brakes For disc caliper repair SRAM Bleed Block Brake Tool UPC: 710845699412

by SRAM

—$31.95

This small chain tool goes anywhere and actually performs like a shop quality tool. The fine thread, special V-shaped handle, and strong replaceable pin make chain removal and installation a breeze Works on all chains including 10-Speed Perfect take-along chain tool at only 77 grams Handy "loosening shelf" to remedy stiff links after reassembly Nominal Dimensions: 60mm tall, 55mm wide and 15mm thick Park Tool CT-5 Mini Chain Tool Chain Tool UPC: 763477002242

by Park Tool

—$41.95

Park Tool Up-Set Pick Set. A set of three unique, multi-purpose picks ideal for a wide variety of detail work Aluminum handle with magnet Picks are replaceable, cold formed, heat treated and polished high carbon steel Set includes 1-straight, 1-hook and 1-90 degree pick Park Tool Up-Set Pick Tool Set Other Tool UPC: 763477008541

by Park Tool

—$19.14

DT Swiss Grease for star ratchets on DT-Swiss/Hugi hubs.For star ratchets Item Specifications Application Type Tube Case Pack No DT Swiss Special Grease Grease EAN: 7613052329710

by DT Swiss

—$31.95

GG-1 Grease GunUse any brand of grease in self-contained canister or simply attach to your favorite Park Tool grease tube Park Tool GG-1 Injector & Dispenser UPC: 763477003584

by Park Tool

—$17.99

Designed to leave zero residue after application, Finish Line's Bicycle Disc Brake Cleaner displaces any moisture built up on the pad or rotor, resulting in improved and predictable braking, and reduced brake squeal. With the unique characteristic of being acetone free, Finish Line's Bicycle Disc Brake Cleaner is strong enough to clean the dirtiest rotors, yet safe enough to use around paint, carbon fiber and plastic parts. Engineered to rapidly clean disc brake rotors and pads Acetone-free formula Finish Line Bicycle Disc Brake Cleaner Degreaser / Cleaner UPC: 036121711297

by Finish Line

—$22.50

The Muc-Off Bio Drivetrain Cleaner is a complete drivetrain cleaning solution that can either be poured into a chain cleaning device or sprayed directly to your chain rings, rear cassettes and derailleurs to clean your entire drivetrain within seconds. It's also fully biodegradable and safe for metal, plastic, rubber and seals. Fast and effective grease cutting formula Removes all chain oil and wax residue Safely Eliminates drive chain contaminants Biodegradable Ideal for use with chain cleaning devices Trigger spray included for easy application Deep cleans all drive chain areas in seconds Item Specifications Application Type Spray Case Pack No Muc-Off Drivetrain Cleaner Degreaser / Cleaner EAN: 5037835295009

by Muc-Off

—$21.15

Specially designed, and precisely manufactured to gently adjust bent or damaged brake rotors. Features two different slot depths laser cut from high quality steel Centered handle is vinyl dipped for comfort Park Tool Rotor Truing Fork Brake Tool UPC: 763477002877

by Park Tool

—$12.95

Park Spoke Wrenches are precisely sized for the spoke nipple and made from durable materials that provide years of dependable use. Precision sized to fit the three most popular spoke nipple sizes on the market, .127"/3.23mm, .130"/3.30mm and .136"/3.45mm Nickel plated for years of service. Designed for the home mechanic Park Tool Spoke Wrenches Spoke Wrench UPC: 763477007285

by Park Tool

—$93.95

Park Tool Derailleur Alignment Gauge and straighenner for keeping drive train in correct alignment. Gauge bar made of heavy gauge, chrome plated steel Adjusts to fit 20 to 29 + wheels Replaceable threaded tip Upgraded, large inner shaft for added strength* Tighter tolerances for improved accuracy* Improved clearance and reach to fit more frame/hanger combos including low clearance thru axle derailleur hangers* *Compared to DAG-2 Park Tool Derailleur Alignment Gauge Frame Tool UPC: 763477002624

by Park Tool

—$62.95

Tools designed by Park Tool to service Bottom Brackets. Removes and installs the bearings and bearing units used in BB86, BB90, BB92, Shimano, SRAM, GXP, Race Face and other press fit bottom bracket systems using a 24mm spindle Includes: bearing removal tool and two installation bushings (#669) Park Tool BBT PressFit Bottom Bracket Tool UPC: 763477000644

by Park Tool

—$35

The Park Tool CM-5.3 uses an extra-large solvent reservoir and a series of four rotating brushes to get chains sparkling clean inside and out. A magnet at the bottom of the CM-5.3's solvent reservoir draws away particles scrubbed from the chain, effectively keeping them from being redistributed on the chain during cleaning. The durable sponge material draws solvent from the chain as it exits the CM-5.3, reducing drips and mess. Compatible with all multi and single-speed chains* Compatible with center and rear drive Ebikes Holds 59 mL (2 fl. oz.) of solvent Replaceable brushes and sponge (part # RBS-5) *All standard bicycle chain sizes will fit through the CM-5.3. However, some single-speed bikes are not fully compatible with the CM-5.3 due to the low clearance between the chain and chain stay. Park Tool CM-5.3 Cyclone Chain Scrubber Cleaning Tool UPC: 763477001948

by Park Tool

—$10.99

Specially designed brushes for cleaning hard to reach areas on most bicycles.A sturdy bicycle cleaning brush with a unique angled and contoured shape perfect for cleaning cassettes and freewheels as well as tires. With a strong ergonomic handle and stiff nylon bristles, the GSC-4 scrubs away the toughest muck and mess. Park Tool Brushes and Cleaning Tools Cleaning Tool UPC: 763477003591

by Park Tool

—$9.99

Shimano Disc Brake Caliper Bleeding Spacers. Also known as a bleed block. This is exactly what you need to bleed your Shimano brakes. This little block sits between the piston during the bleed to get the accurate amount of fluid into your system. Made for and fits BR-M985, BR-M785, BR-M666, BR-M596 (XT/XTR/SLX)Useful for retaining the pistons in the correct position when pads are removed from the caliper for bleeding Shimano Bleeding Spacer Brake Tool UPC: 689228602724

by Shimano

—$10.99

Designed to smoothly cut carbon composite handlebars, forks, seat masts, seat posts, etc. Tungsten steel blade fits Park Tool SAW-1 and most 12" hacksaws NOTE: Do NOT use this blade on aluminum Item Specifications Length 12ins Park Tool CSB-1 Carbon Cutting Saw Blade Hacksaw Blade UPC: 763477001450

by Park Tool

—$279.95

A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop - a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Cam-actuated micro-adjustable clamp fits 7/8" to 3" (22 mm 76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts Narrow clamping jaws (2.7"/70 mm) fit into tight areas or on short seat posts Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage Durable, textured powder coat finish Integrated height-adjustable parts tray Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) Maximum weight capacity*: 80 lbs. (36 kg) Height adjustable from 39" to 57" (990 mm 1450 mm) using convenient quick-release lever Base when open forms a triangle of 36" x 36" x 48" (920 mm x 920 mm x 1210 mm) Folds down to 45" x 14.5" (1140 mm x 370 mm) Weight: 16 lbs. (7.2 kg) *NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs Item Specifications Bike Weight Limit (per bike) 80 Stand Style Folding Weight (lb) 16 Park Tool PCS-10.3 Deluxe Home Mechanic Repair Stand Repair Stands UPC: 763477007100

by Park Tool

—$22

Tools for repair and maintenance of RockShox Reverb suspension seatposts.Specific to RockShox Reverb post RockShox Reverb Tools Suspension Tool UPC: 710845798894

by RockShox

—$115.95

The Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel. Works on nearly any bicycle spoke no matter what the diameter, material, or shape Easy to use and priced affordably Perfect for building or truing wheels, diagnosing wheel problems, or assembling new bikes Park Tool TM-1 Spoke Tension Meter Spoke Tensiometer UPC: 763477007865

by Park Tool

—$9.29

Set of 3-Snap together tire levers designed for durability and easy removal of tube and tubeless type tires. Built in spoke hook for using multiple levers. Sold as individual tire lever set, carded for display Item Specifications keyword search park consumer tool keyword search TL-1.2 keyword search TL1.2 Park Tool TL-1.2 Tire Levers Tire Lever UPC: 763477007773

by Park Tool

—$32.99

Rockshox Suspension Oil. Item Specifications Ounces 34fl oz Fork Oil Weight 5 RockShox Suspension Oil Suspension Oil and Lube UPC: 710845616778

by RockShox

—$19.99

RockShox's recommended cleaner for suspension internals. Handy aerosol spray degreases and condition small parts like O-rings and seals. Formulated with special conditioners that will not cause O-rings and seals to dry, crack or degrade For use on all suspension products RockShox Suspension Cleaner Degreaser / Cleaner UPC: 710845799426

by RockShox

—$13.39

A high-performance Mineral Oil for Shimano and Magura systems. Formulated specifically for bicycle brake systems and feature no compromise, leading edge chemistry to provide superior fluid life and braking performance. Compatible with all brake systems currently sold. Provides maximum fluid life and braking performance, even at low temperatures. A high-performance Mineral Oil for Shimano and Magura systems Formulated specifically for bicycle brake systems and feature no compromise, leading edge chemistry to provide superior fluid life and braking performance Features a super low viscosity to yield superior lever response, pad retraction, and consistent performance through a full range of operating temperatures Specifically engineered for use in bicycle hydraulic disc brake systems and are compatible with all brake systems currently sold Specifically engineered for use in bicycle hydraulic disc brakes Provides maximum fluid life and braking performance, even at low temperatures Item Specifications Ounces 4fl oz Finish Line Mineral Oil Brake Fluid Disc Brake Fluid UPC: 036121001312

by Finish Line

—$14.99

Formulated to fight stiction, this silicone lubricant conditions and protects seals, O-rings, and other rubber parts. For use on old forks to bring them back to life or to help break in new forks and optimize their performance. Helps suspension forks run more smoothly and quietly Made with polysiloxane and advanced fluoropolymers Finish Line Max Suspension Spray Suspension Oil and Lube UPC: 036121710931

by Finish Line

—$14.99

RockShox Reverb Fork Oil and Lube RockShox Reverb Suspension Oil and Lube UPC: 710845665899

by RockShox

—$49.45

Park Repair Stand Accessories A great work stand accessory built to keep tools, lubes and spare parts close at hand. Universal, large and small compartments Two receiver pods to accept accessories Lube holder and universal tool/towel bar Integrated tab system holds plastic market bag for trash NOTE: Installs directly to the PRS-25, PRS-15, PCS-10 and PCS-11 Repair Stands without the use of the TL8362 Park Tool Stand Accessories Repair Stand Accessory UPC: 763477012210

by Park Tool

—$37.99

Crank Brothers Multi-Tools. Weight: 175g Length: 3.5" (89mm) Storage flask included Material Construction: 6061-T6 aluminum frame with 6150 high tensile steel tools Item Specifications Includes - 2, 2.5, 3, 4, 5, 6, and 8mm Hex Keys - # 1-4 Spoke Wrenches - 8-, 9-, 10-speed Compatible Chain Tool - T10 and T25 Torx - 2 Phillips and 1 Flat-head Screwdriver - 8mm and 10mm Open Wrenches Crank Brothers Multi-Tools Bike Multi-Tool UPC: 641300351197

by Crank Brothers

—$13.49

Fiber Grip is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. Fiber Grip eliminates the need to over tighten clamps to achieve secure connections. Over tightening can cause internal fractures and fatigue of carbon fiber parts. Apply Fiber Grip in a thin film to clamping areas of stems, handlebars, seat posts, and seat tubes. Tested and approved by leading carbon fiber component manufacturers. Designed to reduce slippage between clamped carbon fiber surfaces Eliminates the need to over tighten clamps to achieve secure connections Apply Fiber Grip in a thin film to clamping areas of stems, handlebars, seat posts, and seat tubes to eliminate the need for over tightening, which can cause internal fractures and fatigue of carbon fiber parts Tested and approved by leading carbon fiber component manufacturers Clear, Non-staining Non-Toxic Item Specifications Ounces 1.75fl oz Finish Line Fiber Grip Assembly Compound Assembly Compound UPC: 036121610019

by Finish Line

—$100.76

The SRAM Pro Disc Brake Bleed Kit is designed for servicing SRAM disc brakes systems. High-quality syringes and hoses for precise bleeding Compatible with various SRAM brake models Includes essential tools like bleed blocks and adapters Ensures optimal brake performance with regular maintenance SRAM Bleed Kit Brake Tool UPC: 710845907395

by SRAM

—$28.99

OneUp Components EDC top cap, black Special headset preloader top cap for EDC tool Requires threads to be cut into 1-1/8" threadless alloy steerer using EDC tap Cassette-type lockring adjusts headset preload, uses common cassette lockring tool OneUp EDC Top Cap Headset Tool

by OneUp

—$175.95

Designed and built specifically for a wide variety of bicycle hex work the THH-1 is a set of eight common sizes of professional quality T-Handle hex wrenches built for speed, efficiency, leverage and a perfect fit. Soon to become your favorite hex set, the THH-1 includes a handy tool holder that mounts to any vertical surface, including pegboard and solid surfaces (fasteners not included). Carefully selected combination of Chrome Vanadium and S-2 tool steels 2, 2.5, 3, 4, 5, 6, 8 and 10mm hex wrenches included Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless Machined, chamfered tips allow easier insertion into hex fittings Integrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy Sliding T-handle creates increased leverage and multiple access positions Tool holder is included with the set and mounts to any wall, bench or tool box, perfectly positioning each wrench for easy access and storage Park Tool THH-1 Hex Wrench Hex Wrench UPC: 763477007872

by Park Tool

—$22.59

Squorx nipple drivers for wheelbuilding and servicing DT wheels with Squorx nipples (Spline One). DT Swiss Squorx Nipple Drivers Spoke Wrench EAN: 7630024358288

by DT Swiss

—$26.95

Tools designed by Park Tool to service Bottom Brackets. Used to remove and install all Shimano Octalink and ISIS Drive Splined 20-tooth bottom bracket cups 3/8" drive with 1" wrench flats Park Tool BBT Series Bottom Bracket Tool UPC: 763477000385

by Park Tool

—$48.95

A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The CG-2.4 contains everything needed to quickly and easily clean the chain, cogs, and chainrings: CM-5.3 CYCLONE™ CHAIN SCRUBBER Clean bicycle chains quickly, easily, and effectively without the hassle and mess of removing the chain from the bike. The CM-5.3 uses an extra-large solvent reservoir and a series of four rotating brushes to get chains sparkling clean inside and out. A magnet at the bottom of the CM-5.3's solvent reservoir draws away particles scrubbed from the chain, effectively keeping them from being redistributed on the chain during cleaning. The durable sponge material draws solvent from the chain as it exits the CM-5.3, reducing drips and mess. The CM-5.3 can handle any bike-specific chain, from wide 3/16" single-speed* to narrow 12 and 13-speed. A reversible handle allows the chain to pass through forwards or backwards for compatibility with center drive e-bikes. CB-4 BIO CHAINBRITE Park Tool CB-4 is a 100% biodegradable, natural, plant-based degreaser formulated for use in the CM-5.3 Cyclone Chain Scrubber, CM-25 Professional Chain Scrubber, or with a scrubbing brush as a general purpose degreaser. When used with a chain cleaner, CB-4 gets bicycle chains clean inside and out so they're good as new. Will not harm alloy, plastic, rubber, or carbon fiber parts, so it's safe to use for cleaning cassettes, chainrings, pulleys, or any other component that accumulates muck and grime. GSC-1 GEARCLEAN™ BRUSH The GSC-1 is specially designed to free your bicycle drivetrain from muck and grime. The comfortable handle features a contoured toothed end to reach dirt deep between the gears, and tough nylon bristles clean the derailleur and chain. Saves wear and tear on your chain and cassette. Also works great on derailleur pulleys, brakes, or other places where dirt collects. A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain and Drivetrain Cleaning Kit contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. CG-2.4 works on nearly any bike including multi-speed, single-speed, and e-bikes Includes: CM-5.3 Cyclone Chain Scrubber, GSC-1 GearClean Brush, 8 oz. bottle of Bio ChainBrite Park Tool CG-2.4 Chain and Drivetrain Cleaning Kit Cleaning Tool UPC: 763477001733

by Park Tool

—$29.99

Crank Brothers Multi-Tools. Weight: 168g Length: 3.5" (89mm) Storage flask included Material Construction: 6061-T6 aluminum frame with 6150 high tensile steel tools Item Specifications Includes - 2, 2.5, 3, 4, 5, 6, and 8mm Hex Keys - 8-, 9-, 10-speed Compatible Chain Tool - 4 Spoke Wrenches - Flat-head and Phillips Screwdrivers - 8mm and 10mm Open Wrenches - T25 Torx Crank Brothers Multi-Tools Bike Multi-Tool UPC: 641300351173

by Crank Brothers

—$38.95

Tools designed by Park Tool to service Bottom Brackets. For removing and installing Shimano, Race Face, FSA, Truvativ, Sram, Campagnolo and similar bottom bracket cups with 16 external notches Also works with Shimano to remove and install 8-point Shimano Hollowtech II crank arm adjusting caps Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477000491

by Park Tool

—$23.95

The DH-1 Dummy Hub slides into the rear dropouts of a bicycle frame and replaces the rear wheel, keeping the chain in place while the wheel is removed for cleaning, service, or transportation. The unique design allows the bicycle to be pedaled and the derailleur to be shifted, making the DH-1 an essential tool for chain cleaning or diagnosis of drivetrain issues. Compatible with all multi-speed and 1/8" chain Compatible with quick-release and 12 mm thru axle frames Item Specifications keyword search chain keeper Park Tool DH-1 Dummy Hub Other Hub Tool UPC: 763477002709

by Park Tool

—$28.95

High quality tools ensure that headsets are properly serviced. Park Tool Threadless Nut Setters Headset Tool UPC: 763477008008

by Park Tool

—$21.95

Designed for bicycle work, HMR Hammers feature a fiberglass shaft, a soft touch grip, and a dual head. Forged steel precision machined striking face Steel striking face: 1-1/4" (25mm) diameter Non Marring 293-8 replaceable composite tip 12" long (305mm) Park Tool Shop Hammers Hammer UPC: 763477003966

by Park Tool

—$10.99

Bottom Bracket Lock Ring ToolAdaptor to allow 8mm hex tool to be used on 16mm CINCH bolt and puller cap RaceFace Bottom Bracket Bottom Bracket Tool UPC: 895428019181

by RaceFace

—$11.99

TRP Mineral Oil Brake Fluid boasts excellent thermal stability, ensuring consistent performance even under extreme temperatures. This advanced formula minimizes heat buildup, reducing the risk of brake fade and ensuring smooth, controlled stops every time. Say goodbye to spongy brakes and experience the difference that TRP Mineral Oil Brake Fluid brings to your cycling adventures. Not only does TRP Mineral Oil Brake Fluid excel in performance, but it also prioritizes the longevity of your braking system. This high-quality fluid is engineered to provide superior protection against corrosion, extending the lifespan of your brake components and promoting smooth operation. Trust in TRP Mineral Oil Brake Fluid to keep your brakes in top-notch condition, mile after mile. Maintaining your brakes has never been easier with TRP Mineral Oil Brake Fluid. Its low-viscosity formulation ensures effortless bleeding and compatibility with various brake systems. Whether you're a seasoned mechanic or a DIY enthusiast, you'll appreciate the user-friendly nature of this brake fluid, allowing for quick and hassle-free maintenance. Elevate your braking experience with TRP Mineral Oil Brake Fluid. Combining performance, reliability, and convenience, this 100ml bottle is the ultimate choice for those who demand the best from their brake systems. Don't compromise on safety or performance – trust in TRP Mineral Oil Brake Fluid to deliver unrivaled braking excellence. For all TRP and Tektro hydraulic braking systems. Non-corrosive mineral oil. Increased Boiling point to 270 degrees C Decreased viscosity for better fluid flow TRP Mineral Brake Oil Disc Brake Fluid EAN: 4717592033083

by TRP

—$39.99

Rockshox Suspension Oil. Item Specifications Ounces 34fl oz Fork Oil Weight 0-W30 RockShox Suspension Oil Suspension Oil and Lube UPC: 710845730917

by RockShox

—$32.95

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. 9, 10, 11 and 12-speed master links and chains Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links Item Specifications keyword search pack Drivetrain Speeds 9,10,11,12 Chain Tool Yes Wolf Tooth Masterlink Combo Pack Pliers Chain Tool UPC: 812719027038

by Wolf Tooth

—$19.95

Park Tool TLR-1 is great for any threaded assembly found on a bicycle, including threaded bottom bracket cups, disc brake rotor bolts, stem bolts, and more. Adds security and longevity to any threaded application while still allowing for future removal. TLR-1 is oil tolerant and compatible with steel and aluminum threads. 10 ml (0.34 fl oz) bottle Competes with Loctite 242/243 Not recommended for titanium threads NOTICE: When retaining compound or threadlocker is used on carbon fiber frames or components, adhesive primer such as Park Tool AP-1 must first be applied to all component, fastener and frame surfaces. Failure to do so could result in permanently bonded parts. CAUTION: Some painted surfaces can be sensitive to threadlockers, retaining compounds and primers. Test first on an inconspicuous area to see if it causes a stain or discoloration. Clean off any excess from painted surfaces immediately. Item Specifications Volume (mL) 10 Park Tool TLR-1 Medium Strength Threadlocker Assembly Compound UPC: 763477007667

by Park Tool

—$35

The Bike Cleaner Concentrate in a handy refill pouch. Muc-Off's Nano Tech cleaner in concentrate form. Each Bike Cleaner Concentrate pouch uses 89% less packaging than the equivalent 2 bottles of 1 liter Muc-Off Cleaner. So don't chuck out your old Bike Cleaner bottle; save it and save the planet. The Bike Cleaner concentrate can also be used as a powerful degreaser in its concentrate form. 1 litre bottle = 4 litres of Bike Cleaner Quickly and safely cleans using Nano Technology Powerful degreaser in concentrate form Uses 89% less packaging that two 1 Ltr Muc-Off bottles Biodegradable Safe on all surfaces including carbon fiber & anodized metal Will not harm seals, brake pads or rotors Item Specifications Application Type Bulk Case Pack No Muc-Off Gel Concentrate Cleaner Degreaser / Cleaner EAN: 5037835347005

by Muc-Off

—$32.95

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. 9, 10, 11 and 12-speed master links and chains Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links Item Specifications keyword search pack Drivetrain Speeds 9,10,11,12 Chain Tool Yes Wolf Tooth Masterlink Combo Pack Pliers Chain Tool UPC: 812719027014

by Wolf Tooth

—$113.95

Park Tool Hex wrenches made from industrial tool steel, hardened and tempered for shop use. Available in Y, L-Shape and folding versions High-torque, industrial steel wrenches are durable enough for home or shop use Straight hex shaft on the short side, ball end on the long side Includes Hex Tools: 2, 2.5, 3, 4, 5, 6, 8 & 10mm Precision chamfered tips for accurate fit Comfortable, ergonomically designed nylon handles fit perfectly in your hand Mounts easily onto pegboard using minimum space while keeping tools organized Item Specifications Ball End Yes Set or Individual Set Park Tool Hex Wrenches Hex Wrench UPC: 763477004871

by Park Tool