Tools / Lube / Solvents

—$16.95

Park Tool offers a variety of high quality spoke wrenches that are built to last. Double ended Spoke wrench for select Mavic wheels Smaller end fits 7-spline nipples with a 6.4mm outside diameter Larger end fits 6-spline FORE rim adapters with a 9mm outside diameter Item Specifications Tip Size Mavic Park Tool Spoke Wrenches Spoke Wrench UPC: 763477007469

by Park Tool

—$15.95

Park Tool offers a variety of high quality spoke wrenches that are built to last. Comfortable, vinyl dipped, two-sided spoke wrench is designed to easily access Mavic fittings, including the Mavic SSC Ksyrium and Crossmax SLR wheels The smaller end fits the 6-spline integrated nipples with 5.5mm OD splines, and 7mm thread size nipple The larger end fits the 6-spline 9mm OD of the threaded eyelets of the "FORE drilled rim adapters" found on rims such as the Mavic XM819, EX823 and Speedcity wheels Will not work on Mavic R-Sys wheels Item Specifications Tip Size Mavic Park Tool Spoke Wrenches Spoke Wrench UPC: 763477007438

by Park Tool

—$12.49

Park Tool offers a wide variety of high quality Torx Wrenches for the home or shop mechanic. Made from through-hardened, high torque industrial steel for long life and precision fit Offset P-handle made from durable nylon and ergonomically designed for comfortable use Item Specifications Type P Handle Tip Size T10 Park Tool Torx Wrenches Torx Wrench UPC: 763477010049

by Park Tool

—$13.09

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006264

by Park Tool

—$10.49

Park Tool DW-2 Clutch Wrench. DW-2 is a small, thin wrench with 5.5mm and 3mm openings designed to fit the rear derailleur clutch tension adjuster on Shimano XT, SLX, Deore, Saint and Zee rear Shadow Plus (+) derailleurs and all previous Shadow Plus models.5.5mm and 3mm openings Park Tool DW-2 Clutch Wrench Other Tool UPC: 763477002945

by Park Tool

—$47.95

Bottom brackets have some of the highest torque specs of any component found on a bicycle. Despite this, some bottom bracket cups feature tool fittings that allow mere millimeters of engagement, which can be a problem when attempting removal or installation. Solution: the Park Tool Bottom Bracket Tool Retaining System. Used in conjunction with nearly any Park Tool bottom bracket tool, the BBT-RS uses a spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. The BBT-RS can be configured for use with the vast majority of threaded and thread-together bottom bracket standards. The BBT-RS features an M8 threaded rod and a double-sided adapter nut with M12 and M15 threads, allowing it to thread directly into any compatible cartridge bottom bracket. The M15 adapter can also be used to install any of Park Tool's nine aluminum bottom bracket tools, all of which feature integrated threading for use with the BBT-RS. Washer diameter: 57 mm (2.25") Rod length: 175 mm (6.9") Rod threading: M8 x 1.0 Adapter nut threading: M12 x 1.0 & M15 x 1.0 Park Tool BBT-RS Bottom Bracket Tool Retaining System Bottom Bracket Tool UPC: 763477001603

by Park Tool

—$18.95

Professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit. 2mm Sliding T-Handle Hex Wrench Carefully selected combination of Chrome Vanadium and S-2 tool steels Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless Machined, chamfered tips allow easier insertion into hex fittings Integrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy Sliding T-handle creates increased leverage and multiple access positions Item Specifications Ball End No Set or Individual Individual Style T-Handle Tip Size 2mm Park Tool THH Sliding Hex Wrench Hex Wrench UPC: 763477009401

by Park Tool

—$61.95

Accessories and add-ons to hop up and specialize Park Tool repair stands.Designed to allow any Park Tool PRS-20, PRS-21 or PRS-23 Repair Stand to accept 12mm and 15mm thru axle wheeled bikes with 100mm dropout spacing Park Tool Stand Accessories Repair Stand Accessory UPC: 763477015266

by Park Tool

—$17.95

MTC Multi-Function Tool 2.5, 3, 4, 5, 6 and 8mm hex wrenches T25 & T30 Torx compatible drivers Combo cross/straight tip screwdriver 8 & 15mm box wrenches Key ring holder Park Tool MTC Bike Multi-Tool UPC: 763477003867

by Park Tool

—$384.95

BX-2.2 Tool Case Custom designed tool-holding pallets with loops and pockets Folding, dual-sided pallet wings Front tool pallet that stores securely inside during transport Dent-proof composite shell built around an aluminum frame Key lock Nominal dimensions: 19" x 14.85" x 8.5" (48.25 cm x 37.7 cm x 21.6 cm), 13.2 lbs. (6 kg) Park Tool BX-2.2 Tool Kit UPC: 763477000965

by Park Tool

—$8.75

Replacement Tip for HMR Shop Hammer293-8 Nylon replacement tip head for HMR-8 Shop Hammer Park Tool Hammer Tips Hammer UPC: 763477501738

by Park Tool

—$269.95

High quality tools ensure that headsets are properly serviced. Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork New for 2013, the tool is fully adjustable, allowing precise, independent positioning of each blade around the crown race Locating each blade independently provides flexibility to fit around crown race interferences Universal design works with 1", 1-1/8", 1-1/4" and 1.5 forks (suspension or rigid) and crown races with outside diameters up to 64mm Accepts steering columns up to 430mm in length All steel construction Park Tool Headset Tools Headset Tool UPC: 763477002129

by Park Tool

—$225.95

Park Truing Stand parts to get truing stands back into tip-top working condition. Dial indicator bracket and set measures a wheel's lateral and radial run-out to 0.01mm Mounts easily to any TS-2 or TS-2.2 Truing Stand Enables user to set and follow tolerances for each wheel Includes two dials, mounting brackets and specially designed tips Park Tool Dial Indicators Truing Stand Part UPC: 763477008190

by Park Tool

—$32.95

Chainring lockring tools from Park Tool. Fits Shimano STEPS E6100, E7000, E8000 and E9000 e-bike motor systems For lockrings with 54mm outside diameter with 16 notches Replacement for Shimano TL-FC39 tool 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque Park Tool LRT Chainring Lockring Tool Chainring Tool UPC: 763477006882

by Park Tool

—$54.95

BCB-5 Professional Bike Cleaning Brush Set includes five unique cleaning tools purpose-built for scrubbing away dirt and grime, with long ergonomic handles for leverage and comfort. The soaping brush, bottle brush and straight brush feature bristles made from tampico, a natural fiber derived from the agave plant. Tampico is extremely durable, resists chemicals, and holds moisture well, making it an ideal material for cleaning brushes. Soaping Brush Great for making an initial pass over the bike, dispersing soapy water and breaking up large accumulations of debris Tapered Bottle Brush A general purpose tampico brush for scrubbing areas both big and small Straight Brush A long-reach brush with short, tight tampico bristles for getting into small nooks and crannies such as suspension pivots, saddle rails, and other hard to reach areas Drivetrain Brush Long, stiff nylon bristles make this brush ideal for derailleurs, cassettes, and other areas with grease or dirt build up Soaping Sponge Useful for applying soap and water as well as cleaning delicate surfaces, with a convenient wedge shape Park Tool BCB-5 Professional Bike Cleaning Brush Set Cleaning Tool UPC: 763477001221

by Park Tool

—$18.95

Professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit. 2.5mm Sliding T-Handle Hex Wrench Carefully selected combination of Chrome Vanadium and S-2 tool steels Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless Machined, chamfered tips allow easier insertion into hex fittings Integrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy Sliding T-handle creates increased leverage and multiple access positions Item Specifications Ball End No Set or Individual Individual Style T-Handle Tip Size 2.5mm Park Tool THH Sliding Hex Wrench Hex Wrench UPC: 763477009418

by Park Tool

—$461.95

PRS-22 Repair Stand Constucted from 6063 T6 Lightweight alumium & composites, weighs 12.5lbs Adjustable BB height adjustment from 30"-45" 360 Degree rotation for easy access to all sides of the bike Bottom bracket supports a wide variety of different BB shells Non-Frame clamping, holds securely by bottom bracket and front fork Solid and stable folding tripod design. Works with all axle systems Park Tool PRS-22 Repair Stands UPC: 763477005250

by Park Tool

—$219.95

Easily mounted on any workbench, PRS-7 is versatile and built to stand up to everyday shop use. Features the 100-5D Micro-adjust clamp with cam-actuated adjustment system for quick entry, adjustment and exit Narrow clamping jaws 2.7" (7cm) designed to clamp securely yet fit into tight areas or on short seat posts Fully adjustable clamping pressure prevents damage to thin-walled tubes Features powder coat finish and solid cast aluminum construction Mounting flange has four holes, allowing use of bolts or lag bolts to mount Mounting bolts not included Item Specifications Ship Weight 10lbs Stand Style Bench-mount Park Tool PRS-7 Repair Stand Repair Stands UPC: 763477005878

by Park Tool

—$193.95

Park Truing Stands offer accurate wheel truing with high quality construction. Accurate wheel truing at an economical price Constructed from heavy gauge steel to resist flexing, the TS-8 can be used freestanding or bolted to a bench for extra stability Accepts wheels from 16" to 29", with or without the tire mounted Innovative sliding dropout allows quick wheel installation, no matter what the hub width (up to 170mm) Dishing (centering) is performed by simply flipping the wheel in the stand Park Tool TS-8 Truing Stand UPC: 763477008220

by Park Tool

—$13.95

Designed to fit internal spoke nipples found on many deep section aero rims. Fits internal nipples on many deep section aero rims Extra long (3.25"/ 8.5cm) spoke wrench socket Ergonomically-designed screwdriver handle Item Specifications Tip Size 5.5mm Park Tool Nipple Drivers Spoke Wrench UPC: 763477007322

by Park Tool

—$18.95

Disc brake rotors should be regularly checked for wear to ensure safety and performance. The DCA-1 installs onto most digital, dial, or vernier calipers (including the Park Tool DC-1) and features protruding contact points that allow measurement of the center of the braking surface, bypassing the unworn edge to ensure an accurate measurement. The conical end points of the DCA-1 can be used to measure center-to-center distances of bolt holes for calculating bolt circle diameter (BCD) of chainrings and cranks.Compatible with most standard vernier, dial, and digital caliper designs Park Tool DCA-1 Digital Caliper Accessory Measuring Tool UPC: 763477002389

by Park Tool

—$8.99

Park Truing Stand parts to get truing stands back into tip-top working condition. Park Tool Truing Stand Parts Truing Stand Part UPC: 763477501172

by Park Tool

—$51.95

Dial Indicator Set bolts directly to the stand allowing for greater accuracy and a way to measure results.Dial Indicator Set bolts directly to the stand Park Tool Dial Indicators Truing Stand Part UPC: 763477002785

by Park Tool

—$15.10

Replacement Parts for Park Tool Clamps. Fits clamp models 100-1C, 100-1CA, and 100-2C Simply discard old covers and install new covers; each set includes two circlips Sold as a pair Parts not listed below can be drop shipped from Park, please call QBP and ask for extension 1205 for more information Park Tool Clamp Parts Repair Stand Replacement Part UPC: 763477012944

by Park Tool

—$32.95

The EP-1 is purpose-built to securely install end caps onto brake, derailleur, and dropper post cables. The short tapered jaws with dual crimping positions make it ideal for crimping in tight, inaccessible spaces. Built from forged machined steel with vinyl-dipped handles. Designed to install end caps on brake, derailleur, and dropper post cables Short tapered jaws with dual crimping positions for tight, inaccessible spaces Made from forged machined steel for long-lasting use Vinyl-dipped handles for a secure and comfortable grip Park Tool EP-1 End Cap Crimping Pliers Cable Cutter UPC: 763477003034

by Park Tool

—$12.49

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006325

by Park Tool

—$7.25

Built for everyday bike shop use, the Shop Inflator utilizes a true dual Presta and Schrader head that rotates, making valve access quick and easy.Includes 3 different size O-Rings Park Tool Shop Inflator Shop Air Compressor Head UPC: 763477015389

by Park Tool

—$13.49

Replacement Parts for Park Tool Clamps. Fits clamps on the repair stands PCS-9, PCS-10 and PCS-11 Sold as a pair Parts not listed below can be drop shipped from Park, please call QBP and ask for extension 1205 for more information Park Tool Clamp Parts Repair Stand Replacement Part UPC: 763477004987

by Park Tool

—$16.95

Park Tool hex tools are made from high torque industrial steel and through hardened for long life. Item Specifications Type L Wrench,Ball End Tip Size 10.0mm Park Tool Hex Wrenches Hex Wrench UPC: 763477004284

by Park Tool

—$24.95

Park Snap Ring Pliers Park Tool Snap Ring Pliers Snap Ring Plier UPC: 763477006042

by Park Tool

—$274.95

The portable work bench features a large work surface with specially sized slots, holes, and ports for holding tools and accessories. Heavy duty steel legs provide a rock solid base for heavy tools and supplies Folds down for compact storage Work Surface: 36 x 23" Folded Dimensions: 42.5 x 23 x 7" Set Up Dimensions: 36 x 23 x 32.5" Park Tool PB-1 Portable Work Bench Work Bench UPC: 763477005717

by Park Tool

—$9

The 2602A is a fitting designed for use with the Park Tool BKM-1.2 Bleed Kit to bleed SRAM Maven brakes and any other SRAM mineral oil brakes that use the Bleeding Edge bleed port. Park Tool BKM-1.2 SRAM Bleeding Edge Adapter Brake Tool UPC: 763477516527

by Park Tool

—$21.95

Disposable gloves keep hands free of grime and protected from potentially harmful chemicals and solvents. Made from a thick, heavy-duty nitrile material, our gloves provide superior fit and are tough enough to withstand a day's work. An essential companion for brake bleeding, drivetrain cleaning, and other messy procedures. Powder-free and latex-free Ambidextrous Box of 100 gloves Available in sizes S, M, L, and XL Park Tool MG-3 Nitrile Mechanics Gloves Miscellaneous Shop Supply UPC: 763477009739

by Park Tool

—$17.95

Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. Carefully selected combination of Chrome Vanadium and S-2 tool steels Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless Sliding T-handle creates increased leverage and multiple access positions Park Tool THT Sliding T-Handle Torx Compatible Wrench Torx Wrench UPC: 763477009500

by Park Tool

—$338.95

Designed to be easily mounted to any post or wall stud, the PRS-4 is a shop quality stand. Features the 100-3C adjustable linkage clamp fits bike frame tubes from 1" to 1 5/8" Clamp has reliefs on both jaws to allow for cable routing and durable replaceable clamp covers Places the clamp approximately 14.5" from the wall Features powder coat finish and solid cast aluminum construction Mounting bolts not included Mounting plate is 6 x 2.5" (15 x 6cm) with holes approximately 1/2" in diameter on 4" centers Item Specifications Ship Weight 10lbs Stand Style Wall-mount Park Tool PRS-4 Wall Mounted Repair Stand Repair Stands UPC: 763477005823

by Park Tool

—$10.95

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006363

by Park Tool

—$12.95

Park Tool saw guides ensure a straight, clean cut every time.Insert for the SG-7.2 Saw Guide to cut either alloy or carbon handlebars for the WTB PadLoc grips Item Specifications keyword search padloc Park Tool Saw Guides Head & Steerer Tube Cutting Tool UPC: 763477006554

by Park Tool

—$42.95

Shop quality, preset torque driver that limits the amount of torque applied to fasteners, preventing over tightening and damage to lightweight components. All metal internal construction for long life Comfortable ergonomic composite molded grip Includes 3mm, 4mm, 5mm and T25 bits (stored in handle) 1/4" drive Magnetic socket retains bits Item Specifications Bit Size 3mm Hex,4mm Hex,5mm Hex,T25 Bits Included Yes Park Tool Preset Torque Driver Torque Wrench UPC: 763477005809

by Park Tool

—$39.95

Professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined, perfectly balanced 6061 aluminum handle hard anodized to take the rigors of everyday use.Ergonomic, CNC machined, perfectly balanced 6061 aluminum handle hard anodized Park Tool Precision Hex Driver Hex Wrench UPC: 763477002693

by Park Tool

—$10.49

Park Truing Stand parts to get truing stands back into tip-top working condition. Park Tool Truing Stand Parts Truing Stand Part UPC: 763477501189

by Park Tool

—$13.95

Individual metric combination wrench for daily shop use or advanced mechanics. 15mm combination wrench Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip Item Specifications Tip Size 15mm Park Tool Metric Wrench Combination Wrench UPC: 763477024909

by Park Tool

—$28.99

Replacement Parts for Park Tool Clamps. Fits the older clamps with plastic-dipped jaws No cable groove Plastic cover should be removed before installing new covers Parts not listed below can be drop shipped from Park, please call QBP and ask for extension 1205 for more information Park Tool Clamp Parts Repair Stand Replacement Part UPC: 763477012906

by Park Tool

—$29.95

Park Tool bottom bracket tools for installation and removal of 16 notch bottom brackets. Fits 16-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 39-40 mm and a minor diameter (inside of notches) of 37.6 mm Fits Shimano XTR BB93, Dura-Ace BB9000, and Token Also fits Shimano STEPS square spindle e-bike systems including: E6000, E6002, E6050 Replacement for Shimano TL-FC38 tool Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477001610

by Park Tool

—$16.95

The Dummy Pedal allows for easy adjustments. Quickly installs to take the place of a pedal when making adjustments during bike assembly Use of the DP-3 is much quicker than threading a pedal into the crank and then unthreading it after the bike is assembled Park Tool Dummy Pedal Pedal Tool UPC: 763477002815

by Park Tool

—$10.95

Regular lubrication of bicycle chains addresses annoying squeaks and noises, and extends the life of the chain and drivetrain components. Formulated using a proprietary blend of oils, Park Tool CL-1.2 Chain Lube works great in wet or dry conditions. It penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion. Compatible with all bicycle chains. Also works great as general-purpose light lubricant for use on bicycle brake and derailleur cables and housing, spoke nipples, and derailleur and brake pivots.Some painted surfaces can be sensitive to oil and grease. Clean off any excess oil or grease immediately. Test first on an inconspicuous area to see if it causes a stain or discoloration Park Tool CL-1.2 Chain Lube Lubricant UPC: 763477001825

by Park Tool

—$71.95

The QTH-1 is an ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners and fittings found on bicycles. The magnetic "quick-change" handle allows for one-handed operation and makes changing bits quick and easy. The bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box, or can be permanently mounted to any wall or tool board. The QTH-1 is a professional-grade tool built to withstand the rigors of daily shop use, and is fully rebuildable. Includes the following magnetic 1/4" bits: 2mm, 2.5mm, 3mm, 4mm, 5mm & 6mm hex T25 Torx-compatible #2 Philips cross tip Bit holder includes empty spaces for 2 extra bits Park Tool Quick Change Bit Driver Set Ratchets & Bits UPC: 763477006967

by Park Tool

—$20.95

Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. Carefully selected combination of Chrome Vanadium and S-2 tool steels Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless Sliding T-handle creates increased leverage and multiple access positions Park Tool THT Sliding T-Handle Torx Compatible Wrench Torx Wrench UPC: 763477009548

by Park Tool

—$15.95

MWR Metric Ratchet Wrenches offer world famous Park Tool quality. Strong, comfortable, and beautiful! Wrenches feature open ends and 12-point box ends with 72 tooth, two-way ratcheting mechanisms Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip Item Specifications Tip Size 10mm Park Tool MWR Metric Ratchet Wrench Combination Wrench UPC: 763477024657

by Park Tool

—$21.95

Environmentally friendly, soy-based cutting fluid that makes any frame cutting tool work better and last longer. Effective on all metals A quality cutting fluid should be used when performing any cutting, tapping, facing, threading, or reaming procedure Item Specifications Ounces 8fl oz Park Tool CF-2 Cutting Fluid Cutting Oil UPC: 763477001078

by Park Tool

—$13.09

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006240

by Park Tool