Tools / Lube / Solvents

—$472.95

The Team Issue Repair Stand is lightweight, stable and packed with features. Three-point leg system creates a stable base on smooth or rough surfaces Features the 100-25D Professional Micro Adjust Clamp that quickly clamps and releases nearly any tube from 7/8 to 3" (23-76mm), including aero tubes Narrow clamping jaws (2.7"/7cm) fit into tight areas or on short seat posts Saddle cradle provides a perfect spot to temporarily rest a bike Clamp rotates 360 degrees for repairs at any angle Soft, durable composite rubber clamping pads will not mare the bike's finish Item Specifications Ship Weight 13lbs Stand Style Folding Park Tool PRS-25 Team Issue Repair Stand Repair Stands UPC: 763477005724

by Park Tool

—$21.95

Designed to fit internal spoke nipples found on many deep section aero rims. Item Specifications Tip Size 15mm / 17mm / 19mm Park Tool Nipple Drivers Spoke Wrench UPC: 763477004291

by Park Tool

—$18.95

Accessories and add-ons to hop up and specialize Park Tool repair stands.Also fits PCS-9.3 and PCS-10.3 Park Tool Stand Accessories Repair Stand Accessory UPC: 763477019011

by Park Tool

—$10.95

Park Tool offers a variety of high quality spoke wrenches that are built to last. Fits older European Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service Vinyl coated in one of four colors indicating the size at a glance Item Specifications Tip Size 3.3mm Park Tool Spoke Wrenches Spoke Wrench UPC: 763477007230

by Park Tool

—$12.49

Park Tool hex tools are made from high torque industrial steel and through hardened for long life.Wrench Length: 105mm Item Specifications Type P Handle,Ball End Tip Size 4.0mm Park Tool Hex Wrenches Hex Wrench UPC: 763477005540

by Park Tool

—$16.10

Park Tool SZR-1 Shop Scissors Shop quality scissors with sturdy, stainless steel blades and a dual density grip Perfect for a wide range of mechanic's duties including cutting zip-ties, boxes, bar tape and handle grips 5 1/2" long Item Specifications keyword search zombie Park Tool SZR-1 Shop Scissors Other Tool UPC: 763477007698

by Park Tool

—$32.95

Tools designed by Park Tool to service Bottom Brackets. Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477000583

by Park Tool

—$80.95

Take the guesswork out of internal routing. The IR-1.3 speeds the installation of internally-routed cable, housing, electronic wiring and hydraulic hose into carbon fiber, titanium, and aluminum frames. The straightforward guide magnet system utilizes five long guide cables with unique fittings, which can be routed through the frame in a number of ways using the included guide magnet. Everything is neatly stored in a convenient compact case. New additions and updates from IR-1.2 Di2 EW-SD300-specific adapter Specially-designed connector clips into the end of Shimano E-tube Di2 EW-SD300 shift wire Double-threaded barb Securely attaches new housing or hydraulic hose to existing housing or hose, allowing for easy replacement without redoing the routing All guide cables have been shortened from 250 cm (98") to 188 cm (74") The case has been upgraded to a round screw-top case, which fits the coiled-up cables better Park Tool IR-1.3 Internal Cable Routing Kit Cable Puller UPC: 763477003041

by Park Tool

—$230.95

A perfect way to start a bicycle tool collection! A great combination of tools to help a home mechanic clean, adjust, maintain, and do some basic repairs on their bike. The SK-4 includes more than 15 genuine Park Tool products that can perform dozens of tasks, and includes a custom Park Tool toolbox with extra room for spare parts and more tools. Includes more than 15 genuine Park Tool products that can perform dozens of tasks Tools are packaged in a custom Park Tool toolbox with extra room for spare parts and more tools Park Tool SK-4 Home Mechanic Starter Kit Tool Kit UPC: 763477006950

by Park Tool

—$9.99

Specially designed brushes for cleaning hard to reach areas on most bicycles.This dual-sided brush is specifically designed for cleaning hard-to-reach areas of the bicycle drivetrain. The long, stiff bristles of the GSC-3 are narrow enough to reach between the gears of tightly-spaced modern cassettes, while the slim contoured end is capable of picking grit and grime out of tight spaces such as derailleur pulley wheels. Park Tool Brushes and Cleaning Tools Cleaning Tool UPC: 763477003539

by Park Tool

—$137.95

Park Tool high quality tools ensure that headsets are properly serviced. Oversized Crown Race Setting System uses two different insert rings to install bearing races on 1.5" and 1-1/4" forks The bearing surface is spared a direct hit by using an aluminum insert Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately Included extension allows work on fork steering tubes up to 425mm SHIS terminology: The CRS-15 services crown races in SHIS 33 and 40 Park Tool Headset Tools Headset Tool UPC: 763477002174

by Park Tool

—$20.95

The TL-6.3 is a set of tire levers designed to provide all the advantages of both steel and composite tire levers. The steel core with protruding tip offers the strength and leverage needed to securely engage stubborn tire beads, while the durable composite coating makes for smooth operation and will not mar sensitive rim surfaces. With its ergonomic shape and ideal size, the TL-6.3 is the perfect size for use as an everyday shop lever, or can be stored in a saddlebag or tool roll for the mobile mechanic. TL-6.3 levers have been redesigned to be stronger and 0.75" (18 mm) longer than their successor, for increased leverage Set of two Dimensions (each): 145 mm x 25 mm x 6 mm (5.75" x 1" x 0.24") Weight (each): 46 grams (1.6 ounces) Redesigned to be stronger and 0.75" (18 mm) longer than their successor, TL-6.2. Set of two Dimensions (each): 145 mm x 25 mm x 6 mm (5.75" x 1" x 0.24") Weight (each): 46 grams (1.6 ounces) Item Specifications Case Pack No Park Tool TL-6.3 Steel Core Tire Levers Tire Lever UPC: 763477008381

by Park Tool

—$68.95

Park Tool Dishing Gauges are perfect wheel alignment tools for the race or home mechanic. Works with any hub width Disassembles quickly for storage or travel and works with all hub types Can still be used when tire is mounted on wheel Accurately gauges dish on 16" to 29" wheels Park Tool Dishing Gauge Dishing Gauge UPC: 763477008640

by Park Tool

—$13.95

Tools designed by Park Tool to service Bottom Brackets. Fits adjusting cup on many adjustable type bottom brackets Round pin ends have a diameter of 2.9mm Park Tool SPA Series Bottom Bracket Tool UPC: 763477006738

by Park Tool

—$252.95

High quality tools ensure that headsets are properly serviced.Fits all sizes Park Tool Headset Tools Headset Tool UPC: 763477004314

by Park Tool

—$27.95

Shop quality screwdrivers designed for comfort and durability. Four shop grade screwdrivers (SD-0, SD-2, SD-3, SD-6) in one handy set The ergonomic, dual-density handle offers excellent comfort and grip Features heat-treated, chrome vanadium tips and shafts for durability Item Specifications Tip Size #1,#2,6.0mm,3.0mm Park Tool Screwdrivers Screwdriver UPC: 763477006479

by Park Tool

—$65.95

Park Tool saw guides ensure a straight, clean cut every time. Specially designed to accommodate wider, carbon specific saw blades For fork steerer tubes up to 1-1/4" Park Tool Saw Guides Head & Steerer Tube Cutting Tool UPC: 763477006646

by Park Tool

—$20.95

Complete take-along systems that feature an I-Beam handle and emergency tools. Dimensions: 2.95 x 1.57 x 0.71" (75 x 40 x 18mm) Weight: 3.81oz (108g) Order 40 or more and Park will engrave your shop name at no extra charge (3-4 week delivery) Item Specifications Includes - 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm Hex Keys - T25 Torx - Flat-head Screwdriver Park Tool I-Beam Series Bike Multi-Tool UPC: 763477004598

by Park Tool

—$428.95

We put together this set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bicycle. A perfect way to start or add to your collection of shop quality bicycle tools. The AK-5 includes a tough toolbox to protect your investment.Includes a tough toolbox to protect your investment Park Tool AK-5 Advanced Mechanic Tool Kit Tool Kit UPC: 763477001214

by Park Tool

—$19.95

Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. Carefully selected combination of Chrome Vanadium and S-2 tool steels Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless Sliding T-handle creates increased leverage and multiple access positions Park Tool THT Sliding T-Handle Torx Compatible Wrench Torx Wrench UPC: 763477009531

by Park Tool

—$27.95

Forged and machined, the ZP-5 is ideal for closely cutting zip ties and many other materials in tight spaces. Perfect for cutting zip ties Not for cables or metal Park Tool SP-5 Flush Cut Pliers Plier UPC: 763477008701

by Park Tool

—$18.95

Park Tool hex tools are made from high torque industrial steel and through hardened for long life. Item Specifications Type Y Wrench,Ball End Tip Size 4.0mm,5.0mm,6.0mm Park Tool Y-Wrenches Y-Wrench UPC: 763477000279

by Park Tool

—$13.19

This handy shop aid is ideal for sizing spokes, ball bearings and crank cotters. Has both metric and fractional spoke length markings For Spokes: Hang the head of the spoke in the oblong hole and read its length on the scale For Crank Cotters and Ball Bearings: Works just like a gauge for drill bits Anodized aluminum with embossed markings to allow easy reading and long life Park Tool Spoke, Cotter, & Ball Bearing Gauge Miscellaneous Spoke Tool UPC: 763477006301

by Park Tool

—$24.95

Park Snap Ring Pliers Park Tool Snap Ring Pliers Snap Ring Plier UPC: 763477006035

by Park Tool

—$15.95

Park Tool hex tools are made from high torque industrial steel and through hardened for long life.Wrench Length: 202mm Item Specifications Type P Handle,Ball End Tip Size 8.0mm Park Tool Hex Wrenches Hex Wrench UPC: 763477005571

by Park Tool

—$10.95

Park Tool offers a variety of high quality spoke wrenches that are built to last. 105 Gauge Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service Vinyl coated in one of four colors indicating the size at a glance No hanger card Item Specifications Tip Size 3.96mm Park Tool Spoke Wrenches Spoke Wrench UPC: 763477007261

by Park Tool

—$37.95

The Park Tool HCW-16.3 combines two tools essential for common bicycle maintenance and repair-a pedal wrench and a chain whip for removing rear sprockets-without sacrificing functionality. With its long handle and E-nickel-plated steel construction, the HCW-16.3 is a strong, durable tool that is built to last, equally at home in the garage or in a professional mechanic's traveling toolbox. Pedal wrench: compatible with any pedal with 15 mm wrench flats Chain whip: compatible with all 7-speed to 12-speed cassettes, including SRAM AXS 12-speed systems, and compatible with single-speed cassettes with a 3/32" cog Park Tool HCW-16.3 Chain Whip/Pedal Wrench Freehub & Cog Tool UPC: 763477003683

by Park Tool

—$34.95

Tools designed by Park Tool to service Bottom Brackets. Designed for heavy duty use, the distance between the pins is adjustable, allowing use on virtually all hanger cups using pin holes Uses hardened, replaceable pins approximately 2.2mm in diameter Park Tool SPA Series Bottom Bracket Tool UPC: 763477006837

by Park Tool

—$127.95

The Park Tool CM-25 Professional Chain Scrubber is a shop quality cleaner built to give years of constant use. Proven chain scrubbing technology leaves chains sparkling clean Durable A380 aluminum die cast case and removable handle Dual sided sponges and wicking pads to help reduce drips Rotating brushes clean on all four sides of every link Brush and sponge cartridge quickly and easily clicks in and out Locking cover with stainless steel hinge pins Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) and some single-speed models 100% serviceable Park Tool CM-25 Professional Chain Scrubber Cleaning Tool UPC: 763477001917

by Park Tool

—$19.95

Park Tool Hex wrenches made from industrial tool steel, hardened and tempered for shop use. Available in Y, L-Shape and folding versions Shop quality L-Shaped stubby hex keys fit into tight fixtures such as caliper mounting bolts and chainring bolts Made from high-torque industrial steel with chamfered tips for tight tolerances 1.5, 2, 2.5, 3, 4, 5, and 6mm hex sizes fit neatly into carrying case HXS-3 Hex Keys are intentionally kept very short 6-20mm in depth to be the specific tool needed to reach fixtures where standard hex keys are impossible to reach Item Specifications Ball End Yes Set or Individual Set Style L-Handle Tip Size 1.5mm Tip Size 2.5mm Tip Size 2mm Tip Size 3mm Tip Size 4mm Tip Size 5mm Tip Size 6mm Park Tool Hex Wrenches Hex Wrench UPC: 763477004048

by Park Tool

—$37.95

Complete take-along systems that feature an I-Beam handle and emergency tools. Chain tool is 10-speed compatible Dimensions: 3.5 x 1.6 x 1.0" (90 x 40 x 25mm) Weight: 6oz, (170g) Order 40 or more and Park will engrave your shop name at no extra charge (3-4 week delivery) Item Specifications Includes - 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm Hex Keys - T25 Torx - Flat-head Screwdriver - Chain Tool - 3.23 and 3.45mm Spoke Wrenches - Tire Lever Park Tool I-Beam Series Bike Multi-Tool UPC: 763477004437

by Park Tool

—$450.95

With extra-tall uprights and wide calipers, the TS-2.3 Professional Wheel Truing Stand is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters. Longer upright arms to accommodate larger maximum wheel size (29"+), wider maximum hub width (200 mm), and increased clearance for rotor discs and tires Included thru axle adaptors with built-in storage Revised caliper arm design for smoother operation Ergonomic speed knob for quick upright adjustment Park Tool TS-2.3 Professional Wheel Truing Stand Truing Stand UPC: 763477008367

by Park Tool

—$31.95

AP-1 prepares surfaces, accelerates curing and promotes maximum performance of Park Tool TLR-1 and TLR-2 Threadlockers as well as RC-1 Retaining Compound. Conveniently contained in a pen for easy and precise application. 10ml pen Competes with Loctite 7649 NOTICE: When retaining compound or threadlocker is used on carbon fiber frames or components, adhesive primer must first be applied to all component, fastener and frame surfaces. Failure to do so could result in permanently bonded parts. CAUTION: Some painted surfaces can be sensitive to threadlockers, retaining compounds and primers. Test first on an inconspicuous area to see if it causes a stain or discoloration. Clean off any excess from painted surfaces immediately. Park Tool AP-1 Adhesive Primer Assembly Compound UPC: 763477000088

by Park Tool

—$60.95

The HBH-3 securely holds handlebars in place on any bike in any position while in a repair stand. Useful for brake bleeding, cable and housing routing, lever adjustment, or any scenario where you want to prevent the handlebars from rotating, including storage or working with the bike rotated upwards. With its articulating clamps and adjustable straps, the HBH-3 can easily be attached in a wide variety of positions onto almost any handlebar, seatpost, frame, fork, or repair stand. Anodized aluminum construction with soft rubber straps. Straps install onto any round tube from 12mm to 60mm (0.5 to 2.4 ), as well as most irregular and aero-shaped tubing found on bicycles Rotating articulating clamps allow for secure installation onto virtually any bicycle in a wide range of positions Usable extension length of 18 to 32 (45cm to 81cm) Collapses and folds to 17 (43cm) for storage Park Tool HBH-3 Extendable Handlebar Holder Repair Stand Accessory UPC: 763477003577

by Park Tool

—$35.95

A great way to keep the benchtop organized during a repair, the OM-2 features an oversized textured work area and raised trays for organizing small parts and hardware. Perfect for overhauling or rebuilding components such as forks, shocks, hubs, suspension linkages, derailleurs, etc. Measures 15" x 24.5" (38cm x 62cm) Interlocking edges allow multiple mats to be joined together Tear/abrasion/shock resistant TPR construction Park Tool Benchtop Overhaul Mat Other Tool UPC: 763477006912

by Park Tool

—$13.44

Park Tool hex tools are made from high torque industrial steel and through hardened for long life.Wrench Length: 152mm Item Specifications Type P Handle,Ball End Tip Size 6.0mm Park Tool Hex Wrenches Hex Wrench UPC: 763477005564

by Park Tool

—$9.49

Makes chainring bolt set installation and removal easy. Securely holds the slotted nut to prevent spinning when tightening or loosening the bolt Double-ended to fit most slotted-type nuts Park Tool CNW-2 Chainring Nut Wrench Chainring Tool UPC: 763477002068

by Park Tool

—$26.95

Park Snap Ring Pliers Park Tool Snap Ring Pliers Snap Ring Plier UPC: 763477006028

by Park Tool

—$56.95

Accurately gauges the straightness of disc brake rotors while the wheel is mounted in a truing stand. Works with any diameter brake rotor Features an infinitely adjustable, finely threaded indicator gauge Works with any diameter brake rotor Park Tool Rotor Truing Gauge Brake Tool UPC: 763477002884

by Park Tool

—$113.95

Shop quality cone wrench for extended use by professional mechanics. Long, vinyl dipped handle for leverage and comfortable use Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006196

by Park Tool

—$13.84

TWB-36 Crow Foot Pedal Wrench Park Tool TWB-36 Crow Foot Pedal Wrench UPC: 763477008398

by Park Tool

—$12.79

Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006356

by Park Tool

—$11.99

Park Tool hex tools are made from high torque industrial steel and through hardened for long life.Wrench Length: 102mm Item Specifications Type P Handle,Ball End Tip Size 3.0mm Park Tool Hex Wrenches Hex Wrench UPC: 763477005533

by Park Tool

—$6.49

Specially designed brushes for cleaning hard to reach areas on most bicycles.Replacement sponge for CM-5, CM-5.2, and CM-5.3 Chain Scrubber Park Tool Brushes and Cleaning Tools Cleaning Tool

by Park Tool

—$27.95

Chainring lockring tools from Park Tool. Fits chainring of Specialized, Cannondale and FSA For lockrings with 47-48mm outside diameter and 4 or 8 notches Fits both 4 notch (FSA and Cannondale) and 8 notch (Specialized) lockrings Park Tool LRT Chainring Lockring Tool Chainring Tool UPC: 763477006899

by Park Tool

—$17.08

Tools designed by Park Tool to service Bottom Brackets. For installation & removal of Shimano & ISIS drive splined 20-tooth bottom bracket cups 32mm Wrench flats Park Tool BBT Series Bottom Bracket Tool UPC: 763477000590

by Park Tool

—$30.95

The SWR-8 is an eight inch (20cm) long ratchet designed to drive any 3/8" drive socket or bit, as well as some Park Tool bottom bracket tools. Forged from alloyed steel and chrome plated for daily use, the SWR-8 is reversible and features a quick release button to easily switch from one socket to another.Chrome plated Park Tool SWR-8 Ratchet Ratchets & Bits UPC: 763477007193

by Park Tool

—$27.95

The 15" SWB-15 is a forged steel breaker bar with a 3/8" square drive head that pivots 180degrees. Features a long, knurled handle, which is extremely useful when extra leverage is needed to remove stubborn fasteners.Knurled handle Park Tool SWB-15 Breaker Bar Other Tool UPC: 763477007186

by Park Tool

—$11.95

These cone wrenches are designed for the home mechanic or occasional user. Made of thin steel and are nickel plated and heat treated for long use Small tool size to carry along for quick repairs Park Tool Double-Ended Cone Wrench Cone Wrench UPC: 763477002778

by Park Tool

—$113.95

Park Tool offers a wide variety of high quality Torx Wrenches for the home or shop mechanic. High-torque, industrial steel wrenches Torx compatible drivers at each end Includes T6, T8, T10, T15, T20, T25, T30, and T40 Comfortable, ergonomically designed nylon handles fit perfectly in your hand Durable wall/pegboard mount tool holder allows easy access and organization Park Tool Torx Wrenches Torx Wrench UPC: 763477004888

by Park Tool