All.

—$99.99

Cane Creek Hellbender 70 headset is designed to bridge the gap between the 50-series and 110-series headsets. Hellbender 70 has all the design characteristics, sealing elements, and stainless steel Hellbender bearings found on a premium 110-series headset, at a price closer to a 50-series. With a cleaner aesthetic, Hellbender 70 offers a very high level of durability with a look to complement modern builds. Cups and covers are internally contoured and relieved to minimize weight and maximize strength Top cover with low-friction upper bearing seal completely seals cup from contaminants and is fully captured by the top cover with no loose parts Alloy Dual-Seal crown race provides excellent seal efficiency with low friction Premium, sealed stainless-steel Hellbender 36x45 degree angled contact bearings Carbon friendly captured compression ring Rugged Bright-Dip anodized finish Interlok spacer compatible (Sold Separately) Item Specifications Bearing Type Cartridge Color Purple Crown Race 40 Defined Color Purple Lower Stack Height 1 Material Aluminum Material Stainless Steel S.H.I.S Lower IS52 S.H.I.S Upper IS41 S.H.I.S. Stem Clamp Diameter 28.6 Threadless Stack Height 10 Upper Stack Height 9 Cane Creek Hellbender 70 Headset Headsets UPC: 840226024769

by Cane Creek

—$99.99

Cane Creek Hellbender 70 Lite is a headset that packs durability, weight savings and value into one product. Equipped with 6061-T6 aluminum and 35 percent lighter over comparable models. The Hellbender 70 Lite is an ideal headset choice for any bike where weight savings is a priority - a lightweight headset that doesn't lack durability or performance. 6061-T6 Aluminum cups and covers are internally contoured and relieved to minimize weight and maximize strength Top cover with low-friction upper bearing seal completely seals cup from contaminants and is fully captured by the top cover with no loose parts Alloy Dual-Seal crown race provides excellent seal efficiency with low friction Lightweight aluminum/w steel hybrid Hellbender Lite sealed cartridge bearing Carbon friendly captured compression ring Item Specifications Bearing Type Cartridge Color Purple Crown Race 40 Defined Color Purple Lower Stack Height 1 Material Aluminum Material Steel S.H.I.S Lower IS52 S.H.I.S Upper IS41 S.H.I.S. Stem Clamp Diameter 28.6 Threadless Stack Height 10 Upper Stack Height 9 Cane Creek Hellbender 70 Lite Headset Headsets UPC: 840226025698

by Cane Creek

—$116.99

Cane Creek Hellbender 70 headset is designed to bridge the gap between the 50-series and 110-series headsets. Hellbender 70 has all the design characteristics, sealing elements, and stainless steel Hellbender bearings found on a premium 110-series headset, at a price closer to a 50-series. With a cleaner aesthetic, Hellbender 70 offers a very high level of durability with a look to complement modern builds. Cups and covers are internally contoured and relieved to minimize weight and maximize strength Top cover with low-friction upper bearing seal completely seals cup from contaminants and is fully captured by the top cover with no loose parts Alloy Dual-Seal crown race provides excellent seal efficiency with low friction Premium, sealed stainless-steel Hellbender 36x45 degree angled contact bearings Carbon friendly captured compression ring Rugged Bright-Dip anodized finish Interlok spacer compatible (Sold Separately) Item Specifications Bearing Type Cartridge Color Purple Crown Race 40 Defined Color Purple Lower Stack Height 4 Material Aluminum Material Stainless Steel S.H.I.S Lower ZS56 S.H.I.S Upper ZS44 S.H.I.S. Stem Clamp Diameter 28.6 Threadless Stack Height 12 Upper Stack Height 8 Cane Creek Hellbender 70 Headset Headsets UPC: 840226020570

by Cane Creek

—$73.99

Cane Creek 50-Series headsets bring a new, modern aesthetic while maintaining a relatively affordable price. Additional machining on the top cover and cups along with refined, laser-etched graphics give the headset a sharper, more angular appearance that feels more appropriate for today's bikes. The 50 is a fantastic upgrade to increase the peace of mind that comes with a quiet, tight, and smooth-riding bike. 6061-T6 Aluminum cups and covers are internally relieved to minimize weight and maximize strength Features a steerer tube o-ring seal, low friction top cover lip seal, and co-molded crown race lip seal to provide protection from contaminants Steel forged and machined crown race offers increased hardness and durability ZN40 sealed cartridge bearings are zinc-coated for corrosion resistance Carbon friendly captured compression ring Interlok spacer compatible (Sold Separately) Item Specifications Bearing Type Cartridge Color Black Crown Race 40 Defined Color Black Lower Stack Height 1 Material Aluminum Material Steel S.H.I.S Lower IS52 S.H.I.S Upper IS42 S.H.I.S. Stem Clamp Diameter 28.6 Threadless Stack Height 10 Upper Stack Height 9 Cane Creek 50-Series Headset Headsets UPC: 840226017846

by Cane Creek

—$94.99

Cane Creek 50-Series headsets bring a new, modern aesthetic while maintaining a relatively affordable price. Additional machining on the top cover and cups along with refined, laser-etched graphics give the headset a sharper, more angular appearance that feels more appropriate for today's bikes. The 50 is a fantastic upgrade to increase the peace of mind that comes with a quiet, tight, and smooth-riding bike. 6061-T6 Aluminum cups and covers are internally relieved to minimize weight and maximize strength Features a steerer tube o-ring seal, low friction top cover lip seal, and co-molded crown race lip seal to provide protection from contaminants Steel forged and machined crown race offers increased hardness and durability ZN40 sealed cartridge bearings are zinc-coated for corrosion resistance Carbon friendly captured compression ring Interlok spacer compatible (Sold Separately) Item Specifications Bearing Type Cartridge Color Black Crown Race 30 Defined Color Black Lower Stack Height 11 Material Aluminum Material Steel S.H.I.S Lower EC44 S.H.I.S Upper ZS44 S.H.I.S. Stem Clamp Diameter 28.6 Threadless Stack Height 19 Upper Stack Height 8 Cane Creek 50-Series Headset Headsets UPC: 840226017877

by Cane Creek

—$15

SRAM hydraulic brake lever parts for repair and maintenance of SRAM levers.Compatible with SRAM models: DB-MOTV-BRZ-A1, DB-MOTV-SLV-A1, DB-MOTV-ULT-A1 SRAM Hydraulic Brake Lever Parts Hydraulic Brake Lever Part UPC: 710845919886

by SRAM

—$25

SRAM Disc brake caliper service kits to keep your caliper operating as intended. Includes (2) 16mm and (2) 15mm caliper pistons, seals, and o-rings Compatible with SRAM models: DB-DB4-A1, DB-DB6-A1, DB-DB8-A1, DB-DB8-B1, DB-MOTV-BRZ-A1, DB-MOTV-SLV-A1, DB-MOTV-ULT-A1 SRAM Disc Brake Caliper Piston Service Kits Disc Caliper Part UPC: 710845919275

by SRAM

—$94.67

Motive features sculpted 4-piston calipers to deliver tunable heavy-duty power for traction and control, opening the aperture on what's possible. Giving you the boundless power of more confidence, and in the process redefining what's required from a low-weight brake. Compatible with SRAM model: DB-MOTV-BRZ-A1 Hose sold separate Features Bleeding Edge bleed port for drip-free maintenance Designed for use with Maxima Mineral Oil only Designed for use with SRAM Mineral Oil Bleed Kit only Item Specifications Brake Caliper Type Post Mount Brake Position Front or Rear Color Diffusion Black Defined Color Black Hydraulic Fluid Type Mineral Oil keyword search DB-MOTV-BRZ-A1 Pad Compound Organic Rotor Included No SRAM Motive Series Disc Brake Calipers Disc Brake Calipers UPC: 710845919268

by SRAM

—$25

Caliper hardware kits for repair and maintenance of SRAM disc brake caliper models. Includes stainless body bolts and seals, Banjo bolt and seals, pad pin and clip Compatible with SRAM models: DB-DB4-A1, DB-DB6-A1, DB-DB8-A1, DB-DB8-B1, DB-MOTV-BRZ-A1, DB-MOTV-SLV-A1, DB-MOTV-ULT-A1 SRAM Caliper Hardware Kits Disc Caliper Part UPC: 710845918896

by SRAM

—$117.33

Motive features sculpted 4-piston calipers to deliver tunable heavy-duty power for traction and control, opening the aperture on what's possible. Giving you the boundless power of more confidence, and in the process redefining what's required from a low-weight brake. Compatible with SRAM models: DB-MOTV-SLV-A1, DB-MOTV-ULT-A1 Hose sold separate Features Bleeding Edge bleed port for drip-free maintenance Designed for use with Maxima Mineral Oil only Designed for use with SRAM Mineral Oil Bleed Kit only Item Specifications Brake Caliper Type Post Mount Brake Position Front or Rear Color Silver Defined Color Silver Hydraulic Fluid Type Mineral Oil keyword search DB-MOTV-SLV-A1, DB-MOTV-ULT-A1 Pad Compound Organic Rotor Included No SRAM Motive Series Disc Brake Calipers Disc Brake Calipers UPC: 710845919244

by SRAM

—$20

SRAM hydraulic brake lever parts for repair and maintenance of SRAM levers. Includes reservoir cap, bladder, and hardware Compatible with SRAM models: DB-MOTV-BRZ-A1, DB-MOTV-SLV-A1, DB-MOTV-ULT-A1 SRAM Hydraulic Brake Lever Parts Hydraulic Brake Lever Part UPC: 710845919220

by SRAM

—$35

Replacement lever blades for various models of SRAM brake levers.Compatible with SRAM model: DB-MVN-BSE-A1 SRAM Brake Lever Blades Hydraulic Brake Lever Part UPC: 710845919114

by SRAM

—$40.84

KNIPEX Internal angled circlip pliers are designed for installing or removing circlips in bore holes. These pliers feature a solid, forged style with non-slip, angled solid tips that are forged as one part of the tool. The pliers body and tips are made from chrome vanadium steel, which is forged and oil-hardened for durability. Additionally, the pliers have a black atramentized finish for added protection. Solid style, forged design Angled solid tips for better grip Tips forged as one part of the tool Chrome vanadium steel; forged and oil-hardened with a black atramentized finish Knipex Internal Angled Snap Ring Pliers Plier UPC: 843221008710

by Knipex

—$77.18

KNIPEX High Leverage diagonal cutters require 20% less effort compared to conventional cutters of the same length, making them ideal for very tough, continuous use. They feature a forged-on axle for heavy-duty work and provide high cutting performance with minimal effort due to the optimal coordination of the cutting edge angle and transmission ratio. The precision cutting edges are induction hardened to approximately 64 HRC, allowing them to cut several types of wire, including piano wire. Made from chrome vanadium heavy-duty steel, these cutters are forged and multi-stage oil-hardened for durability. 20% less effort required compared to conventional diagonal cutters of the same length Forged-on axle for tough, continuous use Optimal cutting edge angle and transmission ratio for minimal effort Chrome vanadium heavy-duty steel; forged and multi-stage oil-hardened Knipex High Leverage Angled Diagonal Cutters Plier UPC: 843221000400

by Knipex

—$40.34

KNIPEX Internal angled circlip pliers are designed for installing or removing circlips in bore holes. These pliers feature a solid, forged style with non-slip, angled solid tips that are forged as one part of the tool. The pliers body and tips are made from chrome vanadium steel, which is forged and oil-hardened for durability. Additionally, the pliers have a black atramentized finish for added protection. Solid style, forged design Angled solid tips for better grip Tips forged as one part of the tool Chrome vanadium steel; forged and oil-hardened with a black atramentized finish Knipex Internal Angled Snap Ring Pliers Plier UPC: 843221000769

by Knipex

—$48.42

KNIPEX 5 3/4" Needle-Nose Combination Pliers are small, high leverage pliers designed for common installation and repair work. Their slim head design and pointed jaws make them handy for use in confined areas. The gripping surfaces have a special convex contour on one side for secure gripping of flat parts, and a milled groove in the gripping area allows small parts such as nails, pins, and bolts to be held and pulled. These pliers offer easy cutting due to the high leverage joint and feature cutting edges for soft, medium hard, and hard wire. Made from high-grade special tool steel, they are forged and multi-stage oil-hardened for long service life and stable tips. Ideal for working in confined areas Securely grip flat parts with a convex contour Holds and pulls small parts like nails, pins, and bolts High-grade special tool steel; forged and multi-stage oil-hardened Knipex Needle-Nose Combination Pliers Plier UPC: 843221021849

by Knipex

—$87.30

KNIPEX Pliers Wrench is a versatile tool that replaces a full set of inch and metric open-end wrenches. It features smooth jaws for damage-free installation of plated fittings, making it ideal for working directly on chrome. This adjustable tightening tool is excellent for gripping, holding, pressing, and bending applications. With zero backlash jaw surface pressure, it prevents damage to sensitive components. The wrench offers multiple adjustment positions at the touch of a button and has a laser-etched scale for setting the wrench opening before gripping the workpiece. Made from chrome vanadium electric steel, it is forged and oil-hardened for durability. The lever transmission greater than 10-1 provides strong gripping power, and the jaws allow bolted connections to be tightened and released quickly using the ratchet principle. Replaces a full set of inch and metric open-end wrenches Smooth jaws for working directly on chrome Multiple adjustment positions and laser-etched scale for metric and inch markings Made from chrome vanadium electric steel; forged and oil-hardened Knipex Pliers Adjustable Wrench Plier UPC: 843221010430

by Knipex

—$78.02

KNIPEX 5" Mini Pliers Wrench is a versatile tool that replaces a full set of inch and metric open-end wrenches up to 7/8". It features smooth jaws for damage-free installation of plated fittings, making it ideal for working directly on chrome. This adjustable tool is excellent for gripping, holding, pressing, and bending applications. With zero backlash jaw surface pressure, it prevents damage to sensitive components. The mini pliers wrench is suitable for precision mechanics, confined spaces, and everyday carry. It has 11 adjustment positions at the touch of a button and parallel jaws for variable gripping. Made from chrome vanadium electric steel, it is forged and oil-hardened for durability. The lever transmission greater than 10-1 provides strong gripping power, and the jaws allow bolted connections to be tightened and released quickly using the ratchet principle. Replaces a full set of inch and metric open-end wrenches up to 7/8" Smooth jaws for working directly on chrome 11 adjustment positions and parallel jaws for variable gripping Made from chrome vanadium electric steel; forged and oil-hardened Knipex Mini Pliers Plier UPC: 843221020514

by Knipex

—$42.50

KNIPEX combination pliers require 35% less effort than conventional pliers due to their high leverage design. They feature cutting edges with a hardness of approximately 63 HRC, making them suitable for heavy-duty cutting tasks. The pliers offer easier cutting, powerful gripping, bending, and pulling, with long cutting edges designed for thicker cables. They also have gripping zones for both flat and round materials, making them versatile for a variety of uses. Made from high-grade special tool steel, these pliers are forged and multi-stage oil-hardened for durability. 35% less effort required than with conventional combination pliers due to high leverage Cutting edge hardness of approximately 63 HRC Gripping zones for flat and round material High-grade special tool steel; forged and multi-stage oil-hardened Knipex High Leverage Combination Pliers Plier UPC: 843221018603

by Knipex

—$43.28

KNIPEX Long Nose Pliers with Cutter are designed for precision and durability, featuring elastic tips that remain stable even when twisted. These snipe nose side cutting pliers, also known as stork beak pliers, have half-round, long, pointed jaws and hardened cutting edges (approx. 61 HRC) suitable for cutting soft, medium hard, and hard wire. The slim long nose is ideal for working in confined areas, and the pliers are made from vanadium steel, forged and multi-stage oil-hardened for enhanced strength and longevity. Elastic tips are stable even when twisted Precision tips are distortion-tolerant and flexible Approx. 61 HRC for various wire types Vanadium steel; forged and multi-stage oil-hardened Item Specifications keyword search needle nose Knipex Long Nose Pliers with Cutter Plier UPC: 843221000592

by Knipex

—$39.44

KNIPEX High Leverage diagonal cutters require 20% less effort compared to conventional cutters of the same length, making them ideal for very tough, continuous use. They feature a forged-on axle for heavy-duty work and provide high cutting performance with minimal effort due to the optimal coordination of the cutting edge angle and transmission ratio. The precision cutting edges are induction hardened to approximately 64 HRC, allowing them to cut several types of wire, including piano wire. Made from chrome vanadium heavy-duty steel, these cutters are forged and multi-stage oil-hardened for durability. 20% less effort required compared to conventional diagonal cutters of the same length Forged-on axle for tough, continuous use Optimal cutting edge angle and transmission ratio for minimal effort Chrome vanadium heavy-duty steel; forged and multi-stage oil-hardened Knipex High Leverage Diagonal Cutters Plier UPC: 843221000271

by Knipex

—$36.90

KNIPEX 7 1/4" Internal Snap Ring Pliers-Forged Tips (44 11 J2) are designed for installing or removing circlips in bore holes. These pliers are suitable for fitting snap rings into bores ranging from 3/4" to 2 23/64". They feature a solid, forged style with non-slip, straight solid tips that are forged as one part of the tool. The pliers body and tips are made from chrome vanadium steel, which is forged and oil-hardened for durability. Additionally, the pliers have a black atramentized finish for added protection. Internal circlip pliers for installing or removing circlips in bore holes Fits snap rings into bores from 3/4" to 2 23/64" Solid style with non-slip, straight solid tips forged as one part of the tool Pliers body and tips made from chrome vanadium steel; forged and oil-hardened with a black atramentized finish Knipex Internal Snap Ring Pliers Plier UPC: 843221000714

by Knipex

—$40.58

KNIPEX 7 1/4" External Snap Ring Pliers-Forged Tipsare designed for installing or removing circlips on shafts, fitting snap rings ranging from 3/4" to 2 23/64". These pliers feature a solid, forged style with non-slip, straight solid tips that are forged as one part of the tool. The pliers body and tips are made from chrome vanadium steel, which is forged and oil-hardened for durability. Designed for installing or removing circlips on shafts Fits snap rings on shafts from 3/4" to 2 23/64" Solid style with non-slip, straight solid tips forged as one part of the tool Made from chrome vanadium steel; forged and oil-hardened Knipex External Snap Ring Pliers Plier UPC: 843221000813

by Knipex

—$147.90

The KNIPEX Snap Ring Pliers Set is a comprehensive and high-quality tool kit designed specifically for working with circlips or snap rings. The set has both internal and external snap ring pliers. These pliers features precise tips or jaws that securely grip the circlips, allowing for easy installation or removal. This set includes one (1) each in a tool roll: Internal Snap Ring Pliers, Internal Angled Snap Ring Pliers, External Snap Ring Pliers and External Angled Snap Ring Pliers. Includes 44 11 J2 (7") and 44 21 J21 (6 1/2" - 90 Angled) with forged tips for installing or removing circlips in bore holes. Features non-slip, straight solid tips for fitting snap rings into bores ranging from 3/4" to 2 23/64" Includes 46 11 A2 (7 1/4") and 46 21 A21 (6 3/4" - 90 Angled) with forged tips for installing or removing circlips on shafts. Features non-slip, 90 angled solid tips for fitting snap rings on shafts ranging from 3/4" to 2 23/64" Tips are forged as one part of the tool, ensuring durability and precision Comes with a four-pocket tool roll-up pouch made of hard-wearing polyester fabric, featuring sewn pockets for each tool and an adjustable snap closure to keep tools secure when not in use Knipex Circlip Pliers Set Plier UPC: 843221003579

by Knipex

—$43.86

KNIPEX external circlip pliers are designed for installing or removing circlips on shafts. These pliers feature a solid, forged style with non-slip, angled solid tips that are forged as one part of the tool. The pliers body and tips are made from chrome vanadium steel, which is forged and oil-hardened for durability. Solid style, forged design Angled solid tips for better grip Tips forged as one part of the tool Chrome vanadium steel; forged and oil-hardened Knipex External Angled Snap Ring Pliers Plier UPC: 843221000868

by Knipex

—$44.22

KNIPEX external circlip pliers are designed for installing or removing circlips on shafts. These pliers feature a solid, forged style with non-slip, angled solid tips that are forged as one part of the tool. The pliers body and tips are made from chrome vanadium steel, which is forged and oil-hardened for durability. Solid style, forged design Angled solid tips for better grip Tips forged as one part of the tool Chrome vanadium steel; forged and oil-hardened Knipex External Angled Snap Ring Pliers Plier UPC: 843221008765

by Knipex

—$91.38

KNIPEX high leverage boltcutters offer exceptional cutting performance, requiring 60% less effort compared to conventional cutters. The induction hardened cutting edges (approx. 64 HRC) are designed for cutting soft, hard, and piano wire, as well as materials like bolts, nails, and rivets up to 1/4" (6.0 mm) in diameter. The lever action design and micro-structured cutting edges ensure easy cutting of large cross-sections with minimal effort. Additionally, the cutters feature a gripping surface below the joint for gripping and pulling wires with a diameter from 3/64", and are made from chrome vanadium heavy-duty steel that is forged and multi-stage oil-hardened for durability. Requires 60% less effort compared to conventional high leverage bolt cutters Induction hardened cutting edges (approx. 64 HRC) for cutting soft, hard, and piano wire Cuts materials like bolts, nails, and rivets up to 1/4" (6.0 mm) diameter Made from chrome vanadium heavy-duty steel, forged, and multi-stage oil-hardened with a straight blade and micro-structured cutting edges for easy cutting of large cross-sections Knipex CoBolt High Leverage Compact Bolt Cutters Plier UPC: 843221000257

by Knipex

—$93.56

KNIPEX cable cutters are designed specifically for cutting copper and aluminum cables, providing a clean and smooth cut without crushing or deformation. They feature precision ground, hardened blades and a favorable lever ratio with optimized cutting edge geometry, making it easier to cut cables up to 25/32" in diameter with one hand. The cutting action is divided into an initial cut for the insulating sheath and a final cut for the conductor, ensuring efficiency and precision. Additionally, the cutters include a pinch guard to protect fingers, an adjustable bolted joint, and are made from high-grade special tool steel that is forged and oil-hardened for durability. Designed for cutting copper and aluminum cables, not suitable for steel wire and hard drawn copper conductors Precision ground, hardened blades provide a clean and smooth cut without crushing or deformation Less effort required due to favorable lever ratio and optimized cutting edge geometry; can cut cables up to 25/32" in diameter with one hand Features a pinch guard to prevent finger injuries, an adjustable bolted joint, and is made from high-grade special tool steel that is forged and oil-hardened Item Specifications keyword search cable cutter Knipex Cable Shears with Twin Cutting Edge Cable Cutter UPC: 843221000332

by Knipex

—$41.30

The Diagonal Cutters offer a higher cutting force, featuring longer cutting edges and a narrow head for better access in confined areas. These cutters are made from vanadium steel, forged and multi-stage oil-hardened, ensuring a long tool life and high loading capacity. They are equipped with induction hardened cutting edges and a strong precision rivet for even movement and extended service life. 20% higher cutting force due to optimum cutting geometry and transmission ratio Induction hardened cutting edges (approx. 62 HRC) and strong precision rivet for long life Narrow head with long cutting edges for good access in confined areas Can cut up to 5/32" for soft wire, 1/8" for medium wire, and 5/64" for hard wire Knipex Diagonal Cutters Plier UPC: 843221001780

by Knipex

—$699.99

The Cane Creek Kitsuma Air 2nd Gen rear shock is built to descend. It hugs the ground on the roughest and steepest trails, giving you maximum grip, a planted feel, and allows you to go faster thanks to a more personalized tune. It's the only 4-way adjustable shock that's tunable by hand - making it easier to move through the setup process quickly and get back to ripping down the trail. Hand-built and individually dyno tested in Fletcher, NC, USA Single-turn dials on all adjustments with laser-etched position marks for faster, easier, and more intuitive tuning Easy-turn dials feature machined grooves for precise feel Higher Max HSR damping provides greater control on big hits, hard compressions, take offs and landings Lower Min HSC damping provides more plush on abrupt impacts and chunky trails Damper features a twin-tube, independent high and low speed compression and rebound circuits Cane Creek patented 3-position Climb Switch technology controls both compression and rebound movement at the same time, effectively eliminating pedal bob and shores up the shock from both ends , instead of just one but still leaves just enough freedom for the shock to move over significant bumps in the trail The Kitsuma Climb Switch has an additional position that locks out the shock entirely for long, self-shuttled climbing days or paved rides to the trail head Valve seats and damper tube materials are specially designed to offer exceptional reliability Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 230 Eyelet Diameter (mm) 15 Lockout Switch Climb Switch Positive Spring Air Stroke (mm) 60 Cane Creek Kitsuma Air Rear Shock - 2nd Gen Rear Shock UPC: 840226104997

by Cane Creek

—$649.99

The Cane Creek Kitsuma Coil 2nd Gen rear shock is built to descend. It hugs the ground on the roughest and steepest trails, giving you maximum grip, a planted feel, and allows you to go faster thanks to a more personalized tune. It's the only 4-way adjustable shock that's tunable by hand - making it easier to move through the setup process quickly and get back to ripping down the trail. Hand-built and individually dyno tested in Fletcher, NC, USA Single-turn dials on all adjustments with laser-etched position marks for faster, easier, and more intuitive tuning Easy-turn dials feature machined grooves for precise feel Higher Max HSR damping provides greater control on big hits, hard compressions, take offs and landings Lower Min HSC damping provides more plush on abrupt impacts and chunky trails Damper features a twin-tube, independent high and low speed compression and rebound circuits Cane Creek patented 3-position Climb Switch technology controls both compression and rebound movement at the same time, effectively eliminating pedal bob and shores up the shock from both ends , instead of just one but still leaves just enough freedom for the shock to move over significant bumps in the trail The Kitsuma Climb Switch has an additional position that locks out the shock entirely for long, self-shuttled climbing days or paved rides to the trail head Valve seats and damper tube materials are specially designed to offer exceptional reliability Coil Spring sold separate Item Specifications External Adjustments Coil Preload External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 230 Eyelet Diameter (mm) 15 Lockout Switch Climb Switch Positive Spring Coil Stroke (mm) 60 Cane Creek Kitsuma Coil Rear Shock - 2nd Gen Rear Shock UPC: 840226099903

by Cane Creek

—$649.99

The Cane Creek Kitsuma Coil 2nd Gen rear shock is built to descend. It hugs the ground on the roughest and steepest trails, giving you maximum grip, a planted feel, and allows you to go faster thanks to a more personalized tune. It's the only 4-way adjustable shock that's tunable by hand - making it easier to move through the setup process quickly and get back to ripping down the trail. Hand-built and individually dyno tested in Fletcher, NC, USA Single-turn dials on all adjustments with laser-etched position marks for faster, easier, and more intuitive tuning Easy-turn dials feature machined grooves for precise feel Higher Max HSR damping provides greater control on big hits, hard compressions, take offs and landings Lower Min HSC damping provides more plush on abrupt impacts and chunky trails Damper features a twin-tube, independent high and low speed compression and rebound circuits Cane Creek patented 3-position Climb Switch technology controls both compression and rebound movement at the same time, effectively eliminating pedal bob and shores up the shock from both ends , instead of just one but still leaves just enough freedom for the shock to move over significant bumps in the trail The Kitsuma Climb Switch has an additional position that locks out the shock entirely for long, self-shuttled climbing days or paved rides to the trail head Valve seats and damper tube materials are specially designed to offer exceptional reliability Coil Spring sold separate Item Specifications External Adjustments Coil Preload External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 230 Eyelet Diameter (mm) 15 Lockout Switch Climb Switch Positive Spring Coil Stroke (mm) 62.5 Cane Creek Kitsuma Coil Rear Shock - 2nd Gen Rear Shock UPC: 840226156750

by Cane Creek

—$649.99

The Cane Creek Kitsuma Coil 2nd Gen rear shock is built to descend. It hugs the ground on the roughest and steepest trails, giving you maximum grip, a planted feel, and allows you to go faster thanks to a more personalized tune. It's the only 4-way adjustable shock that's tunable by hand - making it easier to move through the setup process quickly and get back to ripping down the trail. Hand-built and individually dyno tested in Fletcher, NC, USA Single-turn dials on all adjustments with laser-etched position marks for faster, easier, and more intuitive tuning Easy-turn dials feature machined grooves for precise feel Higher Max HSR damping provides greater control on big hits, hard compressions, take offs and landings Lower Min HSC damping provides more plush on abrupt impacts and chunky trails Damper features a twin-tube, independent high and low speed compression and rebound circuits Cane Creek patented 3-position Climb Switch technology controls both compression and rebound movement at the same time, effectively eliminating pedal bob and shores up the shock from both ends , instead of just one but still leaves just enough freedom for the shock to move over significant bumps in the trail The Kitsuma Climb Switch has an additional position that locks out the shock entirely for long, self-shuttled climbing days or paved rides to the trail head Valve seats and damper tube materials are specially designed to offer exceptional reliability Coil Spring sold separate Item Specifications External Adjustments Coil Preload External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 210 Eyelet Diameter (mm) 15 Lockout Switch Climb Switch Positive Spring Coil Stroke (mm) 50 Cane Creek Kitsuma Coil Rear Shock - 2nd Gen Rear Shock UPC: 840226149288

by Cane Creek

—$649.99

The Cane Creek Kitsuma Coil 2nd Gen rear shock is built to descend. It hugs the ground on the roughest and steepest trails, giving you maximum grip, a planted feel, and allows you to go faster thanks to a more personalized tune. It's the only 4-way adjustable shock that's tunable by hand - making it easier to move through the setup process quickly and get back to ripping down the trail. Hand-built and individually dyno tested in Fletcher, NC, USA Single-turn dials on all adjustments with laser-etched position marks for faster, easier, and more intuitive tuning Easy-turn dials feature machined grooves for precise feel Higher Max HSR damping provides greater control on big hits, hard compressions, take offs and landings Lower Min HSC damping provides more plush on abrupt impacts and chunky trails Damper features a twin-tube, independent high and low speed compression and rebound circuits Cane Creek patented 3-position Climb Switch technology controls both compression and rebound movement at the same time, effectively eliminating pedal bob and shores up the shock from both ends , instead of just one but still leaves just enough freedom for the shock to move over significant bumps in the trail The Kitsuma Climb Switch has an additional position that locks out the shock entirely for long, self-shuttled climbing days or paved rides to the trail head Valve seats and damper tube materials are specially designed to offer exceptional reliability Coil Spring sold separate Item Specifications External Adjustments Coil Preload External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 210 Eyelet Diameter (mm) 15 Lockout Switch Climb Switch Positive Spring Coil Stroke (mm) 55 Cane Creek Kitsuma Coil Rear Shock - 2nd Gen Rear Shock UPC: 840226119953

by Cane Creek

—$699.99

The Cane Creek Kitsuma Air 2nd Gen rear shock is built to descend. It hugs the ground on the roughest and steepest trails, giving you maximum grip, a planted feel, and allows you to go faster thanks to a more personalized tune. It's the only 4-way adjustable shock that's tunable by hand - making it easier to move through the setup process quickly and get back to ripping down the trail. Hand-built and individually dyno tested in Fletcher, NC, USA Single-turn dials on all adjustments with laser-etched position marks for faster, easier, and more intuitive tuning Easy-turn dials feature machined grooves for precise feel Higher Max HSR damping provides greater control on big hits, hard compressions, take offs and landings Lower Min HSC damping provides more plush on abrupt impacts and chunky trails Damper features a twin-tube, independent high and low speed compression and rebound circuits Cane Creek patented 3-position Climb Switch technology controls both compression and rebound movement at the same time, effectively eliminating pedal bob and shores up the shock from both ends , instead of just one but still leaves just enough freedom for the shock to move over significant bumps in the trail The Kitsuma Climb Switch has an additional position that locks out the shock entirely for long, self-shuttled climbing days or paved rides to the trail head Valve seats and damper tube materials are specially designed to offer exceptional reliability Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 210 Eyelet Diameter (mm) 15 Lockout Switch Climb Switch Positive Spring Air Stroke (mm) 50 Cane Creek Kitsuma Air Rear Shock - 2nd Gen Rear Shock UPC: 840226146904

by Cane Creek

—$699.99

The Cane Creek Kitsuma Air 2nd Gen rear shock is built to descend. It hugs the ground on the roughest and steepest trails, giving you maximum grip, a planted feel, and allows you to go faster thanks to a more personalized tune. It's the only 4-way adjustable shock that's tunable by hand - making it easier to move through the setup process quickly and get back to ripping down the trail. Hand-built and individually dyno tested in Fletcher, NC, USA Single-turn dials on all adjustments with laser-etched position marks for faster, easier, and more intuitive tuning Easy-turn dials feature machined grooves for precise feel Higher Max HSR damping provides greater control on big hits, hard compressions, take offs and landings Lower Min HSC damping provides more plush on abrupt impacts and chunky trails Damper features a twin-tube, independent high and low speed compression and rebound circuits Cane Creek patented 3-position Climb Switch technology controls both compression and rebound movement at the same time, effectively eliminating pedal bob and shores up the shock from both ends , instead of just one but still leaves just enough freedom for the shock to move over significant bumps in the trail The Kitsuma Climb Switch has an additional position that locks out the shock entirely for long, self-shuttled climbing days or paved rides to the trail head Valve seats and damper tube materials are specially designed to offer exceptional reliability Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 230 Eyelet Diameter (mm) 15 Lockout Switch Climb Switch Positive Spring Air Stroke (mm) 62.5 Cane Creek Kitsuma Air Rear Shock - 2nd Gen Rear Shock UPC: 840226142722

by Cane Creek

—$699.99

The Cane Creek Kitsuma Air 2nd Gen rear shock is built to descend. It hugs the ground on the roughest and steepest trails, giving you maximum grip, a planted feel, and allows you to go faster thanks to a more personalized tune. It's the only 4-way adjustable shock that's tunable by hand - making it easier to move through the setup process quickly and get back to ripping down the trail. Hand-built and individually dyno tested in Fletcher, NC, USA Single-turn dials on all adjustments with laser-etched position marks for faster, easier, and more intuitive tuning Easy-turn dials feature machined grooves for precise feel Higher Max HSR damping provides greater control on big hits, hard compressions, take offs and landings Lower Min HSC damping provides more plush on abrupt impacts and chunky trails Damper features a twin-tube, independent high and low speed compression and rebound circuits Cane Creek patented 3-position Climb Switch technology controls both compression and rebound movement at the same time, effectively eliminating pedal bob and shores up the shock from both ends , instead of just one but still leaves just enough freedom for the shock to move over significant bumps in the trail The Kitsuma Climb Switch has an additional position that locks out the shock entirely for long, self-shuttled climbing days or paved rides to the trail head Valve seats and damper tube materials are specially designed to offer exceptional reliability Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 230 Eyelet Diameter (mm) 15 Lockout Switch Climb Switch Positive Spring Air Stroke (mm) 65 Cane Creek Kitsuma Air Rear Shock - 2nd Gen Rear Shock UPC: 840226117232

by Cane Creek

—$649.99

The Cane Creek Kitsuma Coil 2nd Gen rear shock is built to descend. It hugs the ground on the roughest and steepest trails, giving you maximum grip, a planted feel, and allows you to go faster thanks to a more personalized tune. It's the only 4-way adjustable shock that's tunable by hand - making it easier to move through the setup process quickly and get back to ripping down the trail. Hand-built and individually dyno tested in Fletcher, NC, USA Single-turn dials on all adjustments with laser-etched position marks for faster, easier, and more intuitive tuning Easy-turn dials feature machined grooves for precise feel Higher Max HSR damping provides greater control on big hits, hard compressions, take offs and landings Lower Min HSC damping provides more plush on abrupt impacts and chunky trails Damper features a twin-tube, independent high and low speed compression and rebound circuits Cane Creek patented 3-position Climb Switch technology controls both compression and rebound movement at the same time, effectively eliminating pedal bob and shores up the shock from both ends , instead of just one but still leaves just enough freedom for the shock to move over significant bumps in the trail The Kitsuma Climb Switch has an additional position that locks out the shock entirely for long, self-shuttled climbing days or paved rides to the trail head Valve seats and damper tube materials are specially designed to offer exceptional reliability Coil Spring sold separate Item Specifications External Adjustments Coil Preload External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 210 Eyelet Diameter (mm) 15 Lockout Switch Climb Switch Positive Spring Coil Stroke (mm) 52.5 Cane Creek Kitsuma Coil Rear Shock - 2nd Gen Rear Shock UPC: 840226113302

by Cane Creek

—$699.99

The Cane Creek Kitsuma Air 2nd Gen rear shock is built to descend. It hugs the ground on the roughest and steepest trails, giving you maximum grip, a planted feel, and allows you to go faster thanks to a more personalized tune. It's the only 4-way adjustable shock that's tunable by hand - making it easier to move through the setup process quickly and get back to ripping down the trail. Hand-built and individually dyno tested in Fletcher, NC, USA Single-turn dials on all adjustments with laser-etched position marks for faster, easier, and more intuitive tuning Easy-turn dials feature machined grooves for precise feel Higher Max HSR damping provides greater control on big hits, hard compressions, take offs and landings Lower Min HSC damping provides more plush on abrupt impacts and chunky trails Damper features a twin-tube, independent high and low speed compression and rebound circuits Cane Creek patented 3-position Climb Switch technology controls both compression and rebound movement at the same time, effectively eliminating pedal bob and shores up the shock from both ends , instead of just one but still leaves just enough freedom for the shock to move over significant bumps in the trail The Kitsuma Climb Switch has an additional position that locks out the shock entirely for long, self-shuttled climbing days or paved rides to the trail head Valve seats and damper tube materials are specially designed to offer exceptional reliability Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 210 Eyelet Diameter (mm) 15 Lockout Switch Climb Switch Positive Spring Air Stroke (mm) 55 Cane Creek Kitsuma Air Rear Shock - 2nd Gen Rear Shock UPC: 840226134864

by Cane Creek

—$397.38

350 Dependable Independence - Reliability, versatility and simplicity united in a hub. The 350 hub is a dependable partner for every adventure either with its 36 tooth proven freehub Ratchet system or the fast engaging Ratchet DEG system with 72 points of engagement. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools, but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence. 72 points of engagement Achieving a different engagement angle from what DT Swiss has done to date required a major adaptation to the drive side of the hub. The Ratchet DEG system and its new hub body allow the installation of size-optimized 72-teeth ratchets, at 5 degrees Made of steel, the DEG ratchets are bigger than all the previous DT Swiss ratchets and aim to transmit the power of even the strongest riders for a long time and across a large contact surface The innovative construction of the 350 DEG hub allows bearing replacement without special tools Compatible with 90t DEG service kit, sold separately Approved for use with ebikes (max. 32Km/h or max. 250W) Item Specifications Bearing Type Sealed Cartridge Cassette Body Type SRAM XD Color Black Defined Color Black Designed for ebike Yes Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 157mm Skewer Included No Spoke Interface J-Bend DT Swiss 350 DEG Rear Hubs Rear Hub EAN: 7613052403847

by DT Swiss

—$699.99

The Cane Creek Kitsuma Air 2nd Gen rear shock is built to descend. It hugs the ground on the roughest and steepest trails, giving you maximum grip, a planted feel, and allows you to go faster thanks to a more personalized tune. It's the only 4-way adjustable shock that's tunable by hand - making it easier to move through the setup process quickly and get back to ripping down the trail. Hand-built and individually dyno tested in Fletcher, NC, USA Single-turn dials on all adjustments with laser-etched position marks for faster, easier, and more intuitive tuning Easy-turn dials feature machined grooves for precise feel Higher Max HSR damping provides greater control on big hits, hard compressions, take offs and landings Lower Min HSC damping provides more plush on abrupt impacts and chunky trails Damper features a twin-tube, independent high and low speed compression and rebound circuits Cane Creek patented 3-position Climb Switch technology controls both compression and rebound movement at the same time, effectively eliminating pedal bob and shores up the shock from both ends , instead of just one but still leaves just enough freedom for the shock to move over significant bumps in the trail The Kitsuma Climb Switch has an additional position that locks out the shock entirely for long, self-shuttled climbing days or paved rides to the trail head Valve seats and damper tube materials are specially designed to offer exceptional reliability Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 210 Eyelet Diameter (mm) 15 Lockout Switch Climb Switch Positive Spring Air Stroke (mm) 52.5 Cane Creek Kitsuma Air Rear Shock - 2nd Gen Rear Shock UPC: 840226116839

by Cane Creek

—$397.38

350 Dependable Independence - Reliability, versatility and simplicity united in a hub. The 350 hub is a dependable partner for every adventure either with its 36 tooth proven freehub Ratchet system or the fast engaging Ratchet DEG system with 72 points of engagement. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools, but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence. 72 points of engagement Achieving a different engagement angle from what DT Swiss has done to date required a major adaptation to the drive side of the hub. The Ratchet DEG system and its new hub body allow the installation of size-optimized 72-teeth ratchets, at 5 degrees Made of steel, the DEG ratchets are bigger than all the previous DT Swiss ratchets and aim to transmit the power of even the strongest riders for a long time and across a large contact surface The innovative construction of the 350 DEG hub allows bearing replacement without special tools Compatible with 90t DEG service kit, sold separately Approved for use with ebikes (max. 32Km/h or max. 250W) Item Specifications Bearing Type Sealed Cartridge Cassette Body Type Shimano Micro Spline Color Black Defined Color Black Designed for ebike Yes Hub Drilling 28 Hub/Brake Compatibility Center-Lock Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend DT Swiss 350 DEG Rear Hubs Rear Hub EAN: 7613052404912

by DT Swiss

—$627.50

The EXC 330 carbon rim allow riders to break limits, not rims. The EXC 330 is your steadfast ally, backing your boldest line choices, even if they deviate from the plan. A new construction process enables maximum carbon-layer compression, pushing durability to unprecedented heights. A patent-pending technique ensures meticulous layer-by-layer quality control, delivering minimized imperfections right out of the mold. Brace yourself to surge through the stages and break limits. Full carbon rim construction, tubeless and hookless compatible DT Swiss Pro Lock Hex alloy nipple kit Tubeless valve and tape included Item Specifications Brake Compatibility Disc Only Brake Track None Color Carbon Defined Color Carbon Eyelets None Hub Drilling 28 ISO Diameter 622 / Road / 29" Manufacturer Spec ERD (mm) 601 Material Carbon Rim Depth (mm) 22 Rim Joint Carbon Rim Material Carbon Rim Width (Internal) 30 Tire Type Tubeless Ready Valve Presta Weight 535 Wheel Size 29" DT Swiss EXC 330 Rim Rims EAN: 7613052549330

by DT Swiss

—$627.50

The XMC 320 carbon rim helps riders break free, not down. In the realm of All Mountain riding, versatility reigns supreme. Through an innovative carbon compression process, DT Swiss is able to build durable, yet lightweight rims. The patent-pending layer-by-layer quality control ensures minimal imperfections, elevating your confidence to break the mold. Transform your wheelset into an efficient and dependable companion, whether you're navigating planned routes or embracing the spontaneity of the trail. Break free from the limitations of your previous setup and embrace the boundless possibilities of your next adventure. Full carbon rim construction, tubeless and hookless compatible DT Swiss Pro Lock Hex alloy nipple kit Tubeless valve and tape included Item Specifications Brake Compatibility Disc Only Brake Track None Color Carbon Defined Color Carbon Eyelets None Hub Drilling 28 ISO Diameter 622 / Road / 29" Manufacturer Spec ERD (mm) 601 Material Carbon Rim Depth (mm) 22 Rim Joint Carbon Rim Material Carbon Rim Width (Internal) 30 Tire Type Tubeless Ready Valve Presta Weight 470 Wheel Size 29" DT Swiss XMC 320 Rim Rims EAN: 7613052549316

by DT Swiss

—$627.50

The EXC 330 carbon rim allow riders to break limits, not rims. The EXC 330 is your steadfast ally, backing your boldest line choices, even if they deviate from the plan. A new construction process enables maximum carbon-layer compression, pushing durability to unprecedented heights. A patent-pending technique ensures meticulous layer-by-layer quality control, delivering minimized imperfections right out of the mold. Brace yourself to surge through the stages and break limits. Full carbon rim construction, tubeless and hookless compatible DT Swiss Pro Lock Hex alloy nipple kit Tubeless valve and tape included Item Specifications Brake Compatibility Disc Only Brake Track None Color Carbon Defined Color Carbon Eyelets None Hub Drilling 32 ISO Diameter 622 / Road / 29" Manufacturer Spec ERD (mm) 601 Material Carbon Rim Depth (mm) 22 Rim Joint Carbon Rim Material Carbon Rim Width (Internal) 30 Tire Type Tubeless Ready Valve Presta Weight 535 Wheel Size 29" DT Swiss EXC 330 Rim Rims EAN: 7613052549354

by DT Swiss

—$627.50

The XRC 310 carbon rim allows riders to break records, not backs. For riders committed to constant improvement, the XRC 310 is your gateway to the top. Enjoy snappy acceleration and finely tuned agility, driving you to the forefront of the pack. A cutting-edge technique maximizes carbon layer compression, resulting in DT's lightest carbon MTB rim to date. Now, the opportunity is yours to set and break new records. Full carbon rim construction, tubeless and hookless compatible DT Swiss Pro Lock Hex alloy nipple kit Tubeless valve and tape included Item Specifications Brake Compatibility Disc Only Brake Track None Color Carbon Defined Color Carbon Eyelets None Hub Drilling 28 ISO Diameter 622 / Road / 29" Manufacturer Spec ERD (mm) 602 Material Carbon Rim Depth (mm) 20 Rim Joint Carbon Rim Material Carbon Rim Width (Internal) 30 Tire Type Tubeless Ready Valve Presta Weight 373 Wheel Size 29" DT Swiss XRC 310 Rim Rims EAN: 7613052558950

by DT Swiss

—$397.38

350 Dependable Independence - Reliability, versatility and simplicity united in a hub. The 350 hub is a dependable partner for every adventure either with its 36 tooth proven freehub Ratchet system or the fast engaging Ratchet DEG system with 72 points of engagement. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools, but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence. 72 points of engagement Achieving a different engagement angle from what DT Swiss has done to date required a major adaptation to the drive side of the hub. The Ratchet DEG system and its new hub body allow the installation of size-optimized 72-teeth ratchets, at 5 degrees Made of steel, the DEG ratchets are bigger than all the previous DT Swiss ratchets and aim to transmit the power of even the strongest riders for a long time and across a large contact surface The innovative construction of the 350 DEG hub allows bearing replacement without special tools Compatible with 90t DEG service kit, sold separately Approved for use with ebikes (max. 32Km/h or max. 250W) Item Specifications Bearing Type Sealed Cartridge Cassette Body Type Shimano HG 11/12-Speed Road Color Black Defined Color Black Designed for ebike Yes Hub Drilling 32 Hub/Brake Compatibility Center-Lock Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend DT Swiss 350 DEG Rear Hubs Rear Hub EAN: 7613052404974

by DT Swiss

—$397.38

350 Dependable Independence - Reliability, versatility and simplicity united in a hub. The 350 hub is a dependable partner for every adventure either with its 36 tooth proven freehub Ratchet system or the fast engaging Ratchet DEG system with 72 points of engagement. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools, but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence. 72 points of engagement Achieving a different engagement angle from what DT Swiss has done to date required a major adaptation to the drive side of the hub. The Ratchet DEG system and its new hub body allow the installation of size-optimized 72-teeth ratchets, at 5 degrees Made of steel, the DEG ratchets are bigger than all the previous DT Swiss ratchets and aim to transmit the power of even the strongest riders for a long time and across a large contact surface The innovative construction of the 350 DEG hub allows bearing replacement without special tools Compatible with 90t DEG service kit, sold separately Approved for use with ebikes (max. 32Km/h or max. 250W) Item Specifications Bearing Type Sealed Cartridge Cassette Body Type Shimano HG 11/12-Speed Road Color Black Defined Color Black Designed for ebike Yes Hub Drilling 28 Hub/Brake Compatibility Center-Lock Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend DT Swiss 350 DEG Rear Hubs Rear Hub EAN: 7613052404967

by DT Swiss

—$397.38

350 Dependable Independence - Reliability, versatility and simplicity united in a hub. The 350 hub is a dependable partner for every adventure either with its 36 tooth proven freehub Ratchet system or the fast engaging Ratchet DEG system with 72 points of engagement. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools, but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence. 72 points of engagement Achieving a different engagement angle from what DT Swiss has done to date required a major adaptation to the drive side of the hub. The Ratchet DEG system and its new hub body allow the installation of size-optimized 72-teeth ratchets, at 5 degrees Made of steel, the DEG ratchets are bigger than all the previous DT Swiss ratchets and aim to transmit the power of even the strongest riders for a long time and across a large contact surface The innovative construction of the 350 DEG hub allows bearing replacement without special tools Compatible with 90t DEG service kit, sold separately Approved for use with ebikes (max. 32Km/h or max. 250W) Item Specifications Bearing Type Sealed Cartridge Cassette Body Type SRAM XD Color Black Defined Color Black Designed for ebike Yes Hub Drilling 32 Hub/Brake Compatibility Center-Lock Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend DT Swiss 350 DEG Rear Hubs Rear Hub EAN: 7613052405018

by DT Swiss

—$121.90

The 350 hub is a dependable partner for every adventure. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their hubs without special tools, but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence.Contact-free seals and high precision build guarantee smooth bearings Item Specifications Bearing Type Sealed Cartridge Color Turquoise Defined Color Teal Front Axle 15mm Thru x 110mm Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Spoke Interface J-Bend DT Swiss 350 Front Hub Front Hub EAN: 7613052404646

by DT Swiss