Repair Stand Accessory

—$49.45

Park Repair Stand Accessories A great work stand accessory built to keep tools, lubes and spare parts close at hand. Universal, large and small compartments Two receiver pods to accept accessories Lube holder and universal tool/towel bar Integrated tab system holds plastic market bag for trash NOTE: Installs directly to the PRS-25, PRS-15, PCS-10 and PCS-11 Repair Stands without the use of the TL8362 Park Tool Stand Accessories Repair Stand Accessory UPC: 763477012210

by Park Tool

—$27.95

Park Repair Stand Accessories Designed to prevent the handlebars and front wheel from rotating while a bike is mounted in a repair stand Fits up to 32mm handlebars and oversized top tubes up to 50mm Works on almost any road or mountain bike Park Tool Stand Accessories Repair Stand Accessory UPC: 763477003812

by Park Tool

—$34.99

Park Repair Stand Accessories Park Tool Stand Accessories Repair Stand Accessory UPC: 763477004734

by Park Tool

—$17

Park Repair Stand Accessories The PTH-1 makes sure paper towels are always handy for cleaning hands and parts Fits the PCS-10, PCS-11, PRS-15 and PRS-25 repair stands Holds one standard roll of paper towels and it also works great for hanging clothing, wheels, tires, etc. Park Tool Stand Accessories Repair Stand Accessory UPC: 763477005472

by Park Tool

—$18.95

Accessories and add-ons to hop up and specialize Park Tool repair stands.Also fits PCS-9.3 and PCS-10.3 Park Tool Stand Accessories Repair Stand Accessory UPC: 763477019011

by Park Tool

—$60.95

The HBH-3 securely holds handlebars in place on any bike in any position while in a repair stand. Useful for brake bleeding, cable and housing routing, lever adjustment, or any scenario where you want to prevent the handlebars from rotating, including storage or working with the bike rotated upwards. With its articulating clamps and adjustable straps, the HBH-3 can easily be attached in a wide variety of positions onto almost any handlebar, seatpost, frame, fork, or repair stand. Anodized aluminum construction with soft rubber straps. Straps install onto any round tube from 12mm to 60mm (0.5 to 2.4 ), as well as most irregular and aero-shaped tubing found on bicycles Rotating articulating clamps allow for secure installation onto virtually any bicycle in a wide range of positions Usable extension length of 18 to 32 (45cm to 81cm) Collapses and folds to 17 (43cm) for storage Park Tool HBH-3 Extendable Handlebar Holder Repair Stand Accessory UPC: 763477003577

by Park Tool

—$134.98

Park Repair Stand Accessories Fits older PRS-2/3/4 (including OS models); also fits PRS-4W Cam-actuated adjustment system for quick entry, adjustment and exit Narrow clamping jaws 2.7" (7cm) designed to clamp securely yet fit into tight areas or on short seat posts Fully adjustable clamping pressure prevents damage to thin-walled tubes Park Tool Clamps Repair Stand Accessory UPC: 763477012043

by Park Tool

—$16.95

Park Repair Stand Accessories Easily adapts a PCS-1, PCS-4 or PCS-9 to accept the 106 Work Tray or PTH-1 Paper Towel Holder Fits 1-3/8" tubing NOTE: The 106-AC will not fit the 1-5/8" tubing of the lower weldment of these stands Park Tool Stand Accessories Repair Stand Accessory UPC: 763477012227

by Park Tool

—$40

The Tool Tray add-on is the ultimate service partner for the most demanding mechanics. It's lightweight and durable design delivers easy access to tools, lubricants, spare components and accessories during tune-ups or bike washing sessions. With a towel hook, drain ports, compartmentalized tool holders and a spot for your coffee mug or adult beverage, what else could a bike mechanic need? Note: not compatible with Pro Mechanic HD Bike Repair Stand due to larger tube diameter Diverse selection of tool ports and deep compartments for spare parts Keeps lubes, tools, and spare parts at your fingertips during service Towel hook and parts washing compartment make it a great bike wash and drivetrain cleaning partner Easy-on, easy-off design is compatible with all Feedback Sports upright repair stands Lightweight and durable design is ideal for field work Feedback Sports Bike Repair Stand Tool Tray Repair Stand Accessory UPC: 817966010109

by Feedback Sports

—$18.95

Park Repair Stand Accessories Durable Nylon tray with slots and dividers is ideal for holding small parts and tools Features deep sides and a variety of slots and holes to securely hold tools Tray uses a shim to fit tubes of 1-1/2" (38mm); Without the shim it will fit tubes 1-5/8" (41mm) Intend for stands with a vertical upright tube Fits all Park Tool Repair Stands except PRS-2 OS, PRS-3 OS, and PRS-4 OS, and PRS-15 Park Tool Stand Accessories Repair Stand Accessory UPC: 763477005403

by Park Tool

—$61.95

Accessories and add-ons to hop up and specialize Park Tool repair stands.Designed to allow any Park Tool PRS-20, PRS-21 or PRS-23 Repair Stand to accept 12mm and 15mm thru axle wheeled bikes with 100mm dropout spacing Park Tool Stand Accessories Repair Stand Accessory UPC: 763477015266

by Park Tool

—$42

Our Travel Bag collection is an awesome travel and protective companion for ensuring your stand looks new for years to come. Be the most popular rider at the trailhead with a Feedback Sports repair stand. Be the most popular mechanic at home with a brilliant storage bag. Maximize the portability of your Feedback Sports repair stand Protect your stand s aluminum finish and your other equipment when traveling Travel bag is water-resistant, durable and padded Enough space for a repair stand, Flop Stop, and Pro Truing Stand External window for business cards / ID card Padded Velcro strap for comfortable carrying and transport Full length, dual-zipper design 1-Year Warranty Feedback Sports Repair Stand Travel Bag Repair Stand Accessory UPC: 817966010079

by Feedback Sports

—$15.95

Park Repair Stand AccessoriesThe 1707.2 Collar is designed to allow Pre-2012 PRS-20 and PRS-21 Team Race Stands to accept installation of the #106 Work Tray Park Tool Stand Accessories Repair Stand Accessory UPC: 763477014702

by Park Tool

—$70.95

Accessories and add-ons to hop up and specialize Park Tool repair stands.Mounts onto top of Repair stand Park Tool Stand Accessories Repair Stand Accessory UPC: 763477007841

by Park Tool

—$22

Thru axle adapters for Sprint Repair Stand. Replaces standard 15mm insert Fits 15 x 110mm (Boost) thru axle forks Fits 12 x 148mm (Boost) rear dropouts Precision machining creates precision fit Feedback Sports Thru Axle Adapter Repair Stand Accessory UPC: 817966011205

by Feedback Sports

—$21.95

The RPP-1 offers simple but effective protection for your service area. This 32" tall pad prevents damage to bikes caused by being leaned against or knocked over onto your Park Tool professional repair stand. Covered with an attractive Park Tool blue vinyl finish for easy wiping off of dirt and grease. Compatible with Park Tool Shop Repair Stands with a 2" diameter lower post, including all generations of PRS-2 and PRS-3 Easily removed and installed with hook-and-loop material Park Tool Repair Stand Post Protector Repair Stand Accessory UPC: 763477007070

by Park Tool

—$169.18

Park Repair Stand Accessories Compatable with the PCS-1, PCS-4 & PRS-7 with composite top tubes Cam-actuated adjustment system for quick entry, adjustment and exit Clamp rotates 360 degrees and is adjustable in height up to 67" Narrow clamping jaws (2.7") designed to clamp securely yet fit into tight areas or on short seat posts Fully adjustable clamping pressure prevents damage to thin-walled tubes Park Tool Clamps Repair Stand Accessory UPC: 763477012067

by Park Tool

—$82.95

Accessories and add-ons to hop up and specialize Park Tool repair stands.Mounts onto work bench Park Tool Stand Accessories Repair Stand Accessory UPC: 763477007858

by Park Tool

—$21.35

Thru axle adapters for Sprint Repair Stand. Feedback Sports Thru Axle Adapter Repair Stand Accessory UPC: 817966011212

by Feedback Sports

—$129.95

Accessories and add-ons to hop up and specialize Park Tool repair stands. Park Tool Stand Accessories Repair Stand Accessory UPC: 763477008435

by Park Tool

—$7.99

Accessories and add-ons to hop up and specialize Park Tool repair stands. Park Tool Stand Accessories Repair Stand Accessory

by Park Tool

—$162.99

Park Repair Stand Accessories Compatable with the PRS-25, PCS-10, PCS-11 & PCS-12 Cam-actuated adjustment system for quick entry, adjustment and exit Narrow clamping jaws 2.7" (7cm) designed to clamp securely yet fit into tight areas or on short seat posts Fully adjustable clamping pressure prevents damage to thin-walled tubes Park Tool Clamps Repair Stand Accessory UPC: 763477012104

by Park Tool

—$9.20

Accessories and add-ons to hop up and specialize Park Tool repair stands. Installs onto the clamps found on most Park Tool repair stands to more securely hold D-shaped seat posts by converting one jaw profile to a flat surface Useful for bikes with D-shaped seat posts and other non-traditional designs that would cause a less-than-ideal fit in traditional repair stand jaws Designed to fit over a clamp's existing jaw covers and is easy to remove and install by hand, making it a convenient accessory for your repair stand Park Tool Stand Accessories Repair Stand Accessory UPC: 763477516473

by Park Tool

—$28.95

Park Repair Stand AccessoriesHeavyweight nylon bag with shoulder strap for transporting and storing the PRS-20 Team Race Stand and PRS-21 Team Race Stand Park Tool Stand Accessories Repair Stand Accessory UPC: 763477000347

by Park Tool

—$245.11

Park Repair Stand Accessories Fits bike frame tubes from 1 to 1-5/8" Clamp has reliefs on both jaws for cable routing Features solid cast aluminum construction and durable replaceable clamp covers Fits all generations of PRS-2/3/4 stands and also fits PRS-5 stands manufactured before 1996 Park Tool Clamps Repair Stand Accessory UPC: 763477012036

by Park Tool

—$37.57

Accessories and add-ons to hop up and specialize Park Tool repair stands. Park Tool Stand Accessories Repair Stand Accessory UPC: 763477012241

by Park Tool

—$60

The Tool Tray keeps your essential bike repair tools organized and within reach. It installs quickly without tools and fits all Feedback Sports repair stands, including Pro Mechanic HD and Pro E Lift. With dedicated slots for wrenches and pliers, deep bays for fluids and components, and a magnetic tray for small parts, it's designed for efficiency. A smartphone holder and accessory hooks add convenience, making complex repairs easier. Fits all Feedback Sports repair stands with adapters for 38mm, 50mm, and 70mm tubing Includes 27 tool slots, 2 deep bays, 1 smartphone slot, and 1 magnetic parts tray Comes with 2 accessory hooks that support up to 10 lbs each and fit wheels, forks, and more Tray positions anywhere on the stand and supports up to 25 lbs total Feedback Sports Tool Tray Repair Stand Accessory UPC: 817966013773

by Feedback Sports

—$50

Our Travel Bag collection is an awesome travel and protective companion for ensuring your stand looks new for years to come. Be the most popular rider at the trailhead with a Feedback Sports repair stand. Be the most popular mechanic at home with a brilliant storage bag. Feedback Sports Repair Stand Travel Bag Repair Stand Accessory UPC: 817966010086

by Feedback Sports

—$163.98

Accessories and add-ons to hop up and specialize Park Tool repair stands. Park Tool Stand Accessories Repair Stand Accessory UPC: 763477008664

by Park Tool

—$23.55

Thru axle adapters for Sprint Repair Stand. Feedback Sports Thru Axle Adapter Repair Stand Accessory UPC: 817966011205

by Feedback Sports

—$56.95

The BAG-15 is a heavyweight nylon bag with shoulder strap for transporting and storing Park Tool folding repair stands. Dimensions: 48 inches (1.22 m) long and 24 inches (0.6 m) in circumference Fits the following stands: PCS-9, PCS-9.2, PCS-9.3, PCS-10, PCS-10.2, PCS-10.3, PCS-11, PRS-15, PRS-25, PRS-26 Park Tool Travel Repair Stand Travel and Storage Bag Repair Stand Accessory UPC: 763477001252

by Park Tool

—$400.70

The PRS-33 FC adds a fixed-height clamp to one side of the Park Tool PRS-33 or PRS-33.2 Power Lift Shop Stand, turning it into a double-sided stand. The PRS-33 FC can be installed at any height on the PRS-33.2 upright. Includes clamp and mounting hardware. Clamp capacity: round and aero tubes from 23 to 76 mm (7/8" to 3") wide Jaw height: 70 mm (2.75") Replaceable jaw covers (part #1960) Park Tool PRS-33 FC Fixed-Height Clamp Add-On Kit for PRS-33/PRS-33.2 Repair Stand Accessory UPC: 763477009654

by Park Tool

—$302.87

The increasing popularity of bicycles with non-standard frame geometry presents a problem for mechanics looking to put these bikes into repair stands. Park Tool presents a solution. The Park Tool ASF-1 replaces the clamp in any Park Tool Professional Repair Stand with a rotating crossbar and two adjustable-position 12"/30 cm support forks, which can be configured to accommodate a wide variety of bicycles with non-standard frame designs, including most "moto"-style e-bike frames. The capabilities of the ASF-1 can be expanded using optional 24" support forks (ASF-24, sold separately) to better support wide loads such as trikes and front-loading cargo bikes. Crossbar width: 44.125" (112 cm) Maximum support fork width (outside-to-outside): 40.5" (103 cm) Minimum support fork width (outside-to-outside): 5.75" (15 cm) Fork length: 12" (30 cm) Park Tool ASF-1 Adjustable Support Fixture Repair Stand Accessory UPC: 763477009074

by Park Tool

—$30

Need a little helping hand with your bike repairs? The Compact Tool Tray is perfectly sized for a small assist with your challenging repair projects. Offering quick and intuitive, tool-free installation, it is compatible with all Feedback Sports repair stands including Pro Mechanic HD and Pro E Lift. Dedicated spaces keep your tools and thru axles perfectly organized while a single large, deep recessed bay can hold fluid bottles, components, and additional tools. The Tool Tray can be positioned anywhere on the repair stand to suit your needs, always lending a hand for even the most complex projects. And it's sized with a smaller footprint in case you need to travel. Compatible with all Feedback Sports repair stands. 7 tool slots can hold a variety of large and small-handled tools plus 12 & 15mm thru axles 1 recessed, open bay for fluid bottles, irregularly shaped tools, bicycle parts, and more Tray can be positioned at any height and orientation on the upper tube to suit user preference and project Included adapters fit vertical tubing sizes 38mm, 50mm, or 70mm tray can be used with any repair stand with suitable dimensions Total overall weight capacity 25 lbs (11.3kg) Feedback Sports Compact Tool Tray Repair Stand Accessory UPC: 817966013780

by Feedback Sports

—$19.26

Thru axle adapters for Sprint Repair Stand. Feedback Sports Thru Axle Adapter Repair Stand Accessory UPC: 817966011816

by Feedback Sports