- Shop
- Bikes / Frames
-
Components
- Tires / Tubes / Sealant / Valves
- Forks / Parts
- Rear Shocks / Parts
- Groupsets / Drivetrain Bundles
- Drivetrain
- Shifters
- Handlebars / Grips
- Stems
- Brakes / Pads / Adaptors
- Seatposts / Clamps / Levers
- Saddles / Seats
- Pedals / Cleats / Parts
- Wheels / Hubs / Rims
- Headsets / Parts
- Cables / Housing
-
Accessories
- Tools / Lube / Solvents
- Car / Truck Racks / Tailgate Pads
- Frame Straps
- Pumps / Inflation
- Chainstay / Frame Protectors / Fenders
- Computers / GPS / Electronics
- Hydration Packs / Bags
- Lights
- Water Bottles / Cages
- Gift Ideas / Novelties
- Indoor Trainers
- Bike Travel / Shipping Cases
- Nutritionals
- Locks
- Storage Racks / Stands
-
Apparel
- Helmets
- Jerseys
- Shorts / Bibs
- Gloves
- Shoes / Socks
- Pads / Protective Gear
- Pants
- Eyewear
- Chamois / Short Liners / Base Layer
- Chamois Creams / Embrocations / Butt'r
- Jackets / Vests / Hoodies / Flannels
- Casual Wear
- Headwear
- Brands
- Top Secret Sales (Do Not Tell!)
- Watch
- Read
- My Account
- Help / FAQ's
- Contact Us / Locations
- Call Us | 1-805-375-4525
- Why Shop With Us?
- About Us
- Continue Shopping
- Your Cart is Empty
Rear Shocks / Parts
Showing 1064 products
Shocks
Rear Shock Parts / Service-
Ohlins Rear Shock Mounting Hardware - 8mm x 40mm
—$20.49
Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 8 mm x 40 mm (8 mm diameter bolt hole and 40 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 8 Frame Mount Width 40 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153641978 MPN: 18130-17
Mpn: 840153641978by Ohlins
-
Ohlins Rear Shock Mounting Hardware - 10mm x 30mm
—$20.49
Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 10 mm x 30 mm (10 mm diameter bolt hole and 30 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 10 Frame Mount Width 30 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153641992 MPN: 18130-20
Mpn: 840153641992by Ohlins
-
Ohlins Rear Shock Mounting Hardware - 8mm x 22mm
—$20.49
Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 8 mm x 22 mm (8 mm diameter bolt hole and 21.8 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 8 Frame Mount Width 22 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153641886 MPN: 18130-02
Mpn: 840153641886by Ohlins
-
PUSH Industries SV Eight Rear Shock Mount Hardware Kit - 22.2mm x 8mm, DU Bushing
—$24.48
PUSH Industries rear shock mount kits provide smooth and quiet operation for your SV Eight and VT/X rear shock. Designed for use with SV Eight and VT/X rear shocks Precision machined and hardcoated axle pins Lightweight and rugged aluminum outer sleeves Item Specifications Bolt Mount Diameter 8 Frame Mount Width 22.2 PUSH Industries SV Eight Rear Shock Mount Hardware Kit Rear Shock Mount Kit MPN: PK-SV8-MH-22.2-8
Mpn:by PUSH Industries
-
PUSH Industries SV Eight Rear Shock Mount Hardware Kit - 30mm x 8mm, DU Bushing
—$24.48
PUSH Industries rear shock mount kits provide smooth and quiet operation for your SV Eight and VT/X rear shock. Designed for use with SV Eight and VT/X rear shocks Precision machined and hardcoated axle pins Lightweight and rugged aluminum outer sleeves Item Specifications Bolt Mount Diameter 8 Frame Mount Width 30 PUSH Industries SV Eight Rear Shock Mount Hardware Kit Rear Shock Mount Kit MPN: PK-SV8-MH-30-8
Mpn:by PUSH Industries
-
FOX Mounting Hardware - SS, 8mm x 59.94/2.360
—$26
Stainless Steel Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 8 Frame Mount Width 59.94 FOX Stainless Steel Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973392875 MPN: 803-03-318
Mpn: 821973392875by FOX
-
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 52.0
—$16.10
Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 8 Frame Mount Width 52 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868481 MPN: 11.4118.091.852
Mpn: 710845868481by RockShox
-
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 55.0
—$16.10
Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 8 Frame Mount Width 55 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868511 MPN: 11.4118.091.855
Mpn: 710845868511by RockShox
-
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 38.6
—$16.10
Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 8 Frame Mount Width 38.6 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868337 MPN: 11.4118.091.837
Mpn: 710845868337by RockShox
-
FOX Mounting Hardware - 9 Piece, AL, 6mm x 25.15/0.990
—$22.16
9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 6 Frame Mount Width 25.15 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973390338 MPN: 803-03-262
Mpn: 821973390338by FOX
-
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 58.0, (Comp. w/ Imperial and Metric shocks)
—$15.86
Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 8 Frame Mount Width 58 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868542 MPN: 11.4118.091.858
Mpn: 710845868542by RockShox
-
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 33.6
—$16.10
Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 8 Frame Mount Width 33.6 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868252 MPN: 11.4118.091.829
Mpn: 710845868252by RockShox
-
Ohlins Rear Shock Mounting Hardware - 10mm x 20mm
—$20.49
Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 10 mm x 20 mm (10 mm diameter bolt hole and 20 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 10 Frame Mount Width 20 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153641985 MPN: 18130-18
Mpn: 840153641985by Ohlins
-
Ohlins Rear Shock Mounting Hardware - 10mm x 40mm
—$20.49
Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 10 mm x 40 mm (10 mm diameter bolt hole and 40 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 10 Frame Mount Width 40 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153642005 MPN: 18130-22
Mpn: 840153642005by Ohlins
-
Ohlins Rear Shock Mounting Hardware - 8mm x 34mm
—$20.49
Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 8 mm x 34 mm (8 mm diameter bolt hole and 34 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 8 Frame Mount Width 34 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153641916 MPN: 18130-05
Mpn: 840153641916by Ohlins
-
Ohlins Rear Shock Mounting Hardware - 8mm x 22.2mm
—$20.49
Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 8 mm x 22.2 mm (8 mm diameter bolt hole and 22.2 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 8 Frame Mount Width 22.2 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153641893 MPN: 18130-03
Mpn: 840153641893by Ohlins
-
Ohlins Rear Shock Mounting Hardware - 8mm x 19.05mm
—$20
Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 8 mm x 19.05 mm (8 mm diameter bolt hole and 19.05 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 8 Frame Mount Width 19.05 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153639838 MPN: 18130-11
Mpn: 840153639838by Ohlins
-
Ohlins Rear Shock Mounting Hardware - 6mm x 22mm
—$20.49
Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 6 mm x 22 mm (6 mm diameter bolt hole and 22 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 6 Frame Mount Width 22 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153641923 MPN: 18130-10
Mpn: 840153641923by Ohlins
-
FOX Mounting Hardware - 9 Piece, AL, 8mm x 47.75/1.880
—$22.16
9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 8 Frame Mount Width 47.75 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973391144 MPN: 803-03-308
Mpn: 821973391144by FOX
-
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 52.9
—$16.10
Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 8 Frame Mount Width 52.9 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868498 MPN: 11.4118.091.853
Mpn: 710845868498by RockShox
-
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 10 x 33.5
—$15.86
Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 10 Frame Mount Width 33.5 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868689 MPN: 11.4118.091.010
Mpn: 710845868689by RockShox
-
FOX Mounting Hardware - 9 Piece, AL, 8mm x 41.55/1.636
—$22.16
9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 8 Frame Mount Width 41.55 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973391090 MPN: 803-03-303
Mpn: 821973391090by FOX
-
FOX Mounting Hardware - 9 Piece, AL, 6mm x 49.78/1.960
—$22.16
9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 6 Frame Mount Width 49.78 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973390475 MPN: 803-03-276
Mpn: 821973390475by FOX
-
FOX Mounting Hardware - 9 Piece, AL, 6mm x 27.94/1.100
—$22.16
9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 6 Frame Mount Width 27.94 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973390369 MPN: 803-03-265
Mpn: 821973390369by FOX
-
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 44.0
—$17.70
Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 8 Frame Mount Width 44 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868412 MPN: 11.4118.091.845
Mpn: 710845868412by RockShox
-
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 18.0
—$16.10
Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 8 Frame Mount Width 18 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868009 MPN: 11.4118.091.804
Mpn: 710845868009by RockShox
-
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 10 x 16.2
—$15.86
Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 10 Frame Mount Width 16.2 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868603 MPN: 11.4118.091.002
Mpn: 710845868603by RockShox
-
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 10 x 45.0
—$16.10
Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 10 Frame Mount Width 45 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868719 MPN: 11.4118.091.013
Mpn: 710845868719by RockShox
-
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 51.95, (Compatible w/ Imperial and Metric Shocks)
—$15.86
Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845870521 MPN: 11.4118.091.862
Mpn: 710845870521by RockShox
-
Ohlins Rear Shock Mounting Hardware - 8mm x 35mm
—$20.49
Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 8 mm x 35 mm (8 mm diameter bolt hole and 35 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 8 Frame Mount Width 35 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153641961 MPN: 18130-16
Mpn: 840153641961by Ohlins
-
Ohlins Rear Shock Mounting Hardware - 10mm x 35mm
—$20
Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 10 mm x 35 mm (10 mm diameter bolt hole and 35 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 10 Frame Mount Width 35 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153639869 MPN: 18130-21
Mpn: 840153639869by Ohlins
-
Ohlins Rear Shock Mounting Hardware - 10mm x 25mm
—$20
Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 10 mm x 25 mm (10 mm diameter bolt hole and 25 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 10 Frame Mount Width 25 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153639852 MPN: 18130-19
Mpn: 840153639852by Ohlins
-
Ohlins Rear Shock Mounting Hardware - 8mm x 21.8mm
—$20
Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 8 mm x 21.8 mm (8 mm diameter bolt hole and 21.8 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 8 Frame Mount Width 21.8 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153639814 MPN: 18130-01
Mpn: 840153639814by Ohlins
-
Ohlins Rear Shock Mounting Hardware - 8mm x 26mm
—$20.49
Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 8 mm x 26 mm (8 mm diameter bolt hole and 26 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 8 Frame Mount Width 26 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153641909 MPN: 18130-04
Mpn: 840153641909by Ohlins
-
Ohlins Rear Shock Mounting Hardware - 6mm x 20mm
—$20
Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 6 mm x 20 mm (6 mm diameter bolt hole and 20 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 6 Frame Mount Width 20 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153639845 MPN: 18130-12
Mpn: 840153639845by Ohlins
-
Ohlins Rear Shock Mounting Hardware - 8mm x 44.85mm
—$20
Standard mounting hardware kits to adapt Ohlins rear shocks to most MTB frames. These kits are intended for use with IGUS bushings and are interchangeable with FOX rear shock mounting hardware. hlins, rear shock mounting hardware, 8 mm x 44.85 mm (8 mm diameter bolt hole and 44.85 mm wide) Intended for industry-standard 15 mm diameter eyelets, designed for use with IGUS bushings (Sold Separately) Includes 5 pieces: (1) Pin/Axle, (2) Centering spacers placed on either side of the eyelet, (2) Small O-rings to help seal off grit from the inside of the bushing Item Specifications Bolt Mount Diameter 8 Frame Mount Width 44.85 Ohlins Rear Shock Mounting Hardware Rear Shock Mount Kit UPC: 840153639821 MPN: 18130-06
Mpn: 840153639821by Ohlins
-
PUSH Industries SV Eight Rear Shock Mount Hardware Kit - 25mm x 8mm, DU Bushing
—$24.48
PUSH Industries rear shock mount kits provide smooth and quiet operation for your SV Eight and VT/X rear shock. Designed for use with SV Eight and VT/X rear shocks Precision machined and hardcoated axle pins Lightweight and rugged aluminum outer sleeves Item Specifications Bolt Mount Diameter 8 Frame Mount Width 25 PUSH Industries SV Eight Rear Shock Mount Hardware Kit Rear Shock Mount Kit MPN: PK-SV8-MH-25-8
Mpn:by PUSH Industries
-
PUSH Industries SV Eight Rear Shock Mount Hardware Kit - 20mm x 8mm, DU Bushing
—$24.48
PUSH Industries rear shock mount kits provide smooth and quiet operation for your SV Eight and VT/X rear shock. Designed for use with SV Eight and VT/X rear shocks Precision machined and hardcoated axle pins Lightweight and rugged aluminum outer sleeves Item Specifications Bolt Mount Diameter 8 Frame Mount Width 20 PUSH Industries SV Eight Rear Shock Mount Hardware Kit Rear Shock Mount Kit MPN: PK-SV8-MH-20-8
Mpn:by PUSH Industries
-
PUSH Industries SV Eight Rear Shock Mount Hardware Kit - 35mm x 8mm, DU Bushing
—$24.48
PUSH Industries rear shock mount kits provide smooth and quiet operation for your SV Eight and VT/X rear shock. Designed for use with SV Eight and VT/X rear shocks Precision machined and hardcoated axle pins Lightweight and rugged aluminum outer sleeves Item Specifications Bolt Mount Diameter 8 Frame Mount Width 35 PUSH Industries SV Eight Rear Shock Mount Hardware Kit Rear Shock Mount Kit MPN: PK-SV8-MH-35-8
Mpn:by PUSH Industries
-
FOX Mounting Hardware - 9 Piece, AL, 6mm x 45.72/1.800
—$21.50
9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 6 Frame Mount Width 45.72 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973393018 MPN: 803-03-332
Mpn: 821973393018by FOX
-
FOX Mounting Hardware - 9 Piece, AL, 6mm x 31.75/1.250
—$22.16
9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 6 Frame Mount Width 31.75 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973390406 MPN: 803-03-269
Mpn: 821973390406by FOX
-
FOX Mounting Hardware - 9 Piece, AL, 6mm x 25.91/1.020
—$21.50
9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 6 Frame Mount Width 25.91 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973390352 MPN: 803-03-264
Mpn: 821973390352by FOX
-
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 44.5
—$15.86
Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 8 Frame Mount Width 44.5 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868429 MPN: 11.4118.091.846
Mpn: 710845868429by RockShox
-
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 47.8
—$16.10
Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 8 Frame Mount Width 47.8 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868450 MPN: 11.4118.091.849
Mpn: 710845868450by RockShox
-
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 9.5 x 18.0, (Compatible w/ Imperial and Metric Shocks)
—$15.86
Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845870538 MPN: 11.4118.091.901
Mpn: 710845870538by RockShox
-
PUSH Industries Mounting Hardware Kit, 20mm x 8mm (DU Bushing)
—$20
Mounting Hardware to work with the Push Industries SV8 Shock Item Specifications Bolt Diameter 8 Frame Width 20 Style 3-piece PUSH Industries Push Mounting Hardware Rear Shock Mount Kit MPN: PK-SV8-MH-20-8
Mpn:by PUSH Industries
-
PUSH Industries Mounting Hardware Kit, 20mm x 6mm (DU Bushing)
—$20
Mounting Hardware to work with the Push Industries SV8 Shock Item Specifications Bolt Diameter 6 Frame Width 20 Style 3-piece PUSH Industries Push Mounting Hardware Rear Shock Mount Kit MPN: PK-SV8-MH-20-6
Mpn:by PUSH Industries
-
PUSH Industries Mounting Hardware Kit, 25mm x 8mm (DU Bushing)
—$20
Mounting Hardware to work with the Push Industries SV8 Shock Item Specifications Bolt Diameter 8 Frame Width 25 Style 3-piece PUSH Industries Push Mounting Hardware Rear Shock Mount Kit MPN: PK-SV8-MH-25-8
Mpn:by PUSH Industries
-
PUSH Industries Mounting Hardware Kit, 22.2mm x 8mm (DU Bushing)
—$20
Mounting Hardware to work with the Push Industries SV8 Shock Item Specifications Bolt Diameter 8 Frame Width 22.2 Style 3-piece PUSH Industries Push Mounting Hardware Rear Shock Mount Kit MPN: PK-SV8-MH-22.2-8
Mpn:by PUSH Industries
-
PUSH Industries Mounting Hardware Kit, 30mm x 8mm (DU Bushing)
—$20
Mounting Hardware to work with the Push Industries SV8 Shock Item Specifications Bolt Diameter 8 Frame Width 30 Style 3-piece PUSH Industries Push Mounting Hardware Rear Shock Mount Kit MPN: PK-SV8-MH-30-8
Mpn:by PUSH Industries
« Previous 1 2 3 4 5 Next »
Ohlins Rear Shock Mounting Hardware - 8mm x 40mm
Ohlins Rear Shock Mounting Hardware - 10mm x 30mm
Ohlins Rear Shock Mounting Hardware - 8mm x 22mm
PUSH Industries SV Eight Rear Shock Mount Hardware Kit - 22.2mm x 8mm, DU Bushing
PUSH Industries SV Eight Rear Shock Mount Hardware Kit - 30mm x 8mm, DU Bushing
FOX Mounting Hardware - SS, 8mm x 59.94/2.360
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 52.0
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 55.0
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 38.6
FOX Mounting Hardware - 9 Piece, AL, 6mm x 25.15/0.990
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 58.0, (Comp. w/ Imperial and Metric shocks)
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 33.6
Ohlins Rear Shock Mounting Hardware - 10mm x 20mm
Ohlins Rear Shock Mounting Hardware - 10mm x 40mm
Ohlins Rear Shock Mounting Hardware - 8mm x 34mm
Ohlins Rear Shock Mounting Hardware - 8mm x 22.2mm
Ohlins Rear Shock Mounting Hardware - 8mm x 19.05mm
Ohlins Rear Shock Mounting Hardware - 6mm x 22mm
FOX Mounting Hardware - 9 Piece, AL, 8mm x 47.75/1.880
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 52.9
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 10 x 33.5
FOX Mounting Hardware - 9 Piece, AL, 8mm x 41.55/1.636
FOX Mounting Hardware - 9 Piece, AL, 6mm x 49.78/1.960
FOX Mounting Hardware - 9 Piece, AL, 6mm x 27.94/1.100
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 44.0
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 18.0
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 10 x 16.2
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 10 x 45.0
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 51.95, (Compatible w/ Imperial and Metric Shocks)
Ohlins Rear Shock Mounting Hardware - 8mm x 35mm
Ohlins Rear Shock Mounting Hardware - 10mm x 35mm
Ohlins Rear Shock Mounting Hardware - 10mm x 25mm
Ohlins Rear Shock Mounting Hardware - 8mm x 21.8mm
Ohlins Rear Shock Mounting Hardware - 8mm x 26mm
Ohlins Rear Shock Mounting Hardware - 6mm x 20mm
Ohlins Rear Shock Mounting Hardware - 8mm x 44.85mm
PUSH Industries SV Eight Rear Shock Mount Hardware Kit - 25mm x 8mm, DU Bushing
PUSH Industries SV Eight Rear Shock Mount Hardware Kit - 20mm x 8mm, DU Bushing
PUSH Industries SV Eight Rear Shock Mount Hardware Kit - 35mm x 8mm, DU Bushing
FOX Mounting Hardware - 9 Piece, AL, 6mm x 45.72/1.800
FOX Mounting Hardware - 9 Piece, AL, 6mm x 31.75/1.250
FOX Mounting Hardware - 9 Piece, AL, 6mm x 25.91/1.020
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 44.5
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 8 x 47.8
RockShox Rear Shock Mounting Hardware - 3-Piece, 1/2", 9.5 x 18.0, (Compatible w/ Imperial and Metric Shocks)
PUSH Industries Mounting Hardware Kit, 20mm x 8mm (DU Bushing)
PUSH Industries Mounting Hardware Kit, 20mm x 6mm (DU Bushing)
PUSH Industries Mounting Hardware Kit, 25mm x 8mm (DU Bushing)
PUSH Industries Mounting Hardware Kit, 22.2mm x 8mm (DU Bushing)
PUSH Industries Mounting Hardware Kit, 30mm x 8mm (DU Bushing)
--- Shop Info ---
Newsletter Signup -
© 2026 Worldwide Cyclery
