—$49.99

OneUp Components Comp Platform Pedals, Black The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. FEATURES 10 rear loading Steel pins / side, with Nyloc nuts DU plus cartridge bearing axle system Thin leading edge chamfered design to deflect off obstacles Wide platform design for increased stability Contoured shape provides ultimate connected feel SPECS Weight: 355g Platform Size: 115x105mm # of Pins: 10 per side Axle Material: Black chromoly steel Height: 18.5mm (13.3 at the leading edge) Pin to Axle distance: 108mm Color: Stealth Black, Red, Blue, Orange Body Material: Nylon Composite Check out what one of our customer thinks of these pedals here OneUp Comp Platform Pedals Pedals EAN: 0020462821944

by OneUp

—$135.99

ONEUP CARBON BARS. Strong, lightweight & vertically compliant. The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let you ride harder for longer. The solution is OneUp's patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone. We bench marked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains. Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right. Specs: Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up Weight: 20mm Rise (220g) 35mm Rise (225g) Colour: Black. Decal kits: Available here in Red, Green, Blue, Orange, Purple & White OneUp Carbon Handlebar Flat/Riser Handlebar EAN: 0033562821943

by OneUp

—$94.99

Eliminate dropped chains forever and more than double your chainring life with the new OneUp Components V2 Chain Guide. As the trend for lower and slacker bikes continues, chainring protection is becoming even more important. The OneUp Bash Guide uses the same simple, one tool installation and adjustment as our best-selling ISCG05 Chain Guide, but adds more strength where you need it. The OneUp Bash Guide was developed with input from EWS World Champions, Richie Rude and Jared Graves. Reinforced Nylon bash guards and a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the OneUp Bash Guide can handle the biggest hits, but at a weight of only 102g (34T) you may forget it’s even there. The first chain guide designed to be both Oval and Boost compatible Weight: 90g 28-30T, 105g 32-34T, 110g 36T Capacity: 28-36T Chainline: 7.5mm adjustment Mount: ISCG05 Color: Black top guide piece included Material: 7075 aluminum, top guide glass reinforced thermoplastic OneUp Bash Guide V2 Chain Retention System EAN: 0038362821940

by OneUp

—$59.99

All your trailside tools, always on your bike and instantly accessible The EDC (Everyday Carry) tool contains all your essential trailside tools and can be conveniently stored inside your steerer tube/stem or the EDC Pump for quick and easy access. Add the optional Tubeless Plug Kit to your EDC tool to fix punctures fast. Whether you're going out for a quick lunch ride or setting off on a longer adventure, EDC has all the tools that you need to keep your bike running smoothly and fix any trailside mechanical. Tool features (20 functions, 130g) Includes a 10 function Multi-Tool, Tire Lever and Chain Breaker. Multi tool features (10 functions, 58g) 2, 2.5, 3, 4, 5, 6, 8mm, T25 Torx. Flat Head Screwdriver. EDC Top Cap Tool The EDC Tool contains no loose, easy to lose driver bits Ultra compact and super lightweight. Tire lever/chain breaker features Tire Lever, Chain Breaker, 0,1,2,3 Spoke Keys, Presta Valve Core Tool, Spare Rotor Bolt Carrier features Spare Quick Link Storage 12,16, 20g CO2 Cartridge Storage or 2 x Sealed Storage Capsule Storage capsule The V2 EDC tool now comes with a small and a large sealed storage capsule. The new small capsule is used to cover your jabber and preloaded bacon strip keeping it sticky for longer. The small capsule can be used with EDC Threaded options. It also allows you to use the EDC tool and tubeless plug kit inside the small 70cc OneUp pump. The large capsule only fits inside an EDC Threaded setup, EDC Stem or 100cc pump. The small capsule can be installed inside the large capsule for separating items. EDC tool storage options The EDC Tool was designed to be stored inside your stem/steerer tube or inside the high volume, CNC Aluminum, EDC Pump with integrated CO2 inflator head. Grabbing your EDC tool from the pump is as easy as reaching for your water bottle. OneUp EDC Tool Bike Multi-Tool UPC: 047962821946

by OneUp

—$135.99

ONEUP CARBON BARS. Strong, lightweight & vertically compliant. The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let you ride harder for longer. The solution is OneUp's patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone. We bench marked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains. Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right. Specs: Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up Weight: 20mm Rise (220g) 35mm Rise (225g) Colour: Black. Decal kits: Available here in Red, Green, Blue, Orange, Purple & White OneUp Carbon Handlebar Flat/Riser Handlebar EAN: 0033462821944

by OneUp

—$64.99

OneUp Components EDC Pump 100cc (Tool sold separately) The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish. Don't be that guy on the trail! Make sure to be prepared on every ride and not be stuck walking your bike back. 100cc Pump holds EDC Tool & a 20g CO2 or EDC Tool & the Storage Capsule Fast-On Head (Presta Only) - No threads or locking levers Integrated CO2 Inflator Fully Sealed, Weatherproofed Internals Includes Bottle Cage Mount Material: 6061-T6 160g (without EDC tool system) PUMP VOLUME A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market. Fast-On Head Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump. OneUp EDC Pump Frame Pump UPC: 0024662821940

by OneUp

—$39.99

OneUp Components EDC Plug & Pliers Kit, Green   The EDC PLUG & PLIERS KIT is the perfect addition to the EDC tool system. The tire plug Jabber Tool threads directly into the EDC carrier. The new Quick Link Breaker Pliers are compatible with all 10,11, and 12 speed quick links chains. Both new tools and bacon strips store perfectly within the EDC capsule ready for race day deployment. KIT INCLUDES Quick Link Breaker Pliers (10, 11, 12SP)  Tire Plug Jabber Tool 15 - Bacon Strips SPEC Material:  aluminum/steel/bacon Weight: 17g all in COMPATIBILITY The complete Plug and Pliers kit fits inside the Stash Capsule of the 100cc Pump and Steerer tube setup. The Stash capsule does NOT fit inside the 70cc pump. You cannot store the pliers in the 70cc Pump. Although the Jabber and Tubeless plugs will fit inside. Colors:  GREEN   OneUp EDC Headset Tool EAN: 0030062821947

by OneUp

—$17.99

OneUp Components EDC Gear Strap, Grey - Pair A stretch polyurethane strap with tail clip for neat and secure fastening of your spare tube or gear to your frame. Our strap doesn’t absorb water and mud like a Velcro strap and won’t scratch your frame.   KIT INCLUDES 2x EDC GEAR STRAPS    SPECS Material:  UV Stabilized Polyurethane Weight: 18g per strap Length: 355mm (14") Compatible with: All the bikes Colors:  Grey OneUp EDC Strap Tool Wrap

by OneUp

—$39.99

OneUp Components EDC tap kit Tap used to cup threads into 1-1/8" threadless alloy steerer for EDC top capy OneUp EDC Tap Headset Tool UPC: 023762821942

by OneUp

—$59.99

Eliminate dropped chains forever and more than double your chainring life with the new OneUp Components Chain Guide. At only 35g the OneUp Chain Guide weighs less than a sip of water, and can save you money in less than a season. The first chain guide designed to be both Oval and Boost compatible. Weight: 40g Capacity: 26-38T Chainline: 7.5mm adjustment Mount: ISCG05 Color: Black top guide piece included Material: 7075 aluminum, top guide glass reinforced thermoplastic WHY DO I NEED A GUIDE AND A NARROW WIDE CHAINRING? NW rings are awesome, but they're not perfect and every once in a while you can drop a chain while riding. On a social ride, this means getting dropped by your friends. But when racing an Enduro a dropped chain can cost you the podium, which is why almost every EWS pro runs both a chain guide and narrow wide chainring. HOW CAN I DOUBLE MY CHAINRING LIFE? As a Narrow Wide ring wears, over time the teeth thin and lose their chain retention ability, leading to more dropped chains. The OneUp guide extends NW ring life by limiting the chains side-to-side movement reducing the NW tooth wear and totally preventing the chain from derailing. Installing a OneUp guide means you now only have to replace your chainring when the driving faces have worn out, which typically doubles your usable chainring life. Buy less stuff - Work Less Ride More. OneUp Top Chainguide V2 Chain Retention System EAN: 0038262821941

by OneUp

—$29

OneUp Components EDC top cap, black Special headset preloader top cap for EDC tool Requires threads to be cut into 1-1/8" threadless alloy steerer using EDC tap Cassette-type lockring adjusts headset preload, uses common cassette lockring tool OneUp EDC Top Cap Headset Tool

by OneUp

—$149.99

The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, the OneUp Aluminum Pedals won't slow you down on the climbs. The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, the OneUp Aluminum Pedals won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More. Each pedal contains 4 double sealed full cartridge bearing and no bushings, to eliminate axle play and provide ultimate long-term durability. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy. Available in 8 colors, Black, Blue, Red, Orange, Purple, Green, Oil Slick and Grey. Compatibility SRAM carbon cranks - Due to the deep counterbore of these crank arms, OneUp Alloy pedals are not compatible with SRAM carbon cranks. Crank boots - OneUp Alloy pedals are not compatible with protective crank boots. We recommend removing crank boots before installation. Features 10 rear loading custom hexagonal removable pins per side for maximum grip 4 sealed cartridge bearings per pedal Ultra thin leading edge chamfered design to deflect off any obstacle Fully sealed and serviceable design with built in bearing extractor Wide platform design for increased stability Contoured shape provides ultimate connected feel 355g Platform Size: 115x105mm Axle Material: Chromoly steel Height: 8.3-12mm Pin to Axle distance: 112mm Body Material: 6061-T6 Aluminum OneUp Aluminum Platform Pedals Pedals

by OneUp

—$49.99

OneUp Components Underbash, ISCG05Lower chainring protection without the upper chain retention. If your bike already has built-in chain retention or you simply do not need it and want to protect your chainring, this is your winner! As the trend for lower and slacker bikes continues, chainring protection is becoming even more important. The OneUp underbash uses the same simple, one tool installation and adjustment as the best-selling ISCG05 Chain Guide, but adds more strength where you need it. The OneUp Bash Guide was developed with input from EWS World Champions, Richie Rude and Jared Graves. Reinforced Nylon bash guards and a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the OneUp Bash Guide can handle the biggest hits, but at a weight of only 68g (32-34t) you may forget it’s even there. The first chain guide designed to be both Oval and Boost compatible Designed for frames with 2 ISCG05 tabs only (Evil, Rocky Mountain, etc). Should not be used on frames with 3 ISCG05 tabs 2.5mm chainline adjustment Includes 3 different sizes of bash plate for compatibility with chainrings from 28-36t - Oval chainring and Boost compatible Mount: 2 ISCG05 mounts (see first bullet point) Reinforced nylon bash guard and a back plate cut from 8mm thick 7075-T6 aluminum Weight: 68g (32-34T)     OneUp Underbash Chainring Guard EAN: 0016062821941

by OneUp

—$39.99

When OneUp came out with the EDC tool it changed the game for tool storage on your bike. Now, if you haven't gotten one yet because you didn't want to tap your steerer or it just seemed like too much, this is the tool for you! The EDC Lite is the ultimate in simplicity for having tools stashed on your bike. It's insanely easy to install and hardly any more expensive than some multi-tools by themselves. If you've been putting off getting an EDC or just want a simple little multi-tool on your bike, this is arguably one of the best options. It's cheap enough that's it's just worth a try, you won't be sorry! EDC Lite is a 9 function Multi Tool which contains your most used tools and is designed to live inside your stem/steerer tube. Never get stuck without a Multi Tool on a ride ever again. The EDC Lite Kit includes the 9-function tool and everything you need to install and store it in your stem/steerer tube. Features Allen Keys: 2, 2.5, 3, 4, 5, 6, 8mm Torx key: T25 Torx Other Tools: Flat Head Screwdriver Light weight (Adds just 75g to your bike) Easy to install in less than 5 mins. Color matched to OneUp Composite Pedals, Grips and Handlebar Decals. Not compatible with Carbon Steerers or specialty sizes (some Giant and Cannondale) **Needed Steerer tube length Fox 38: 210mm minimum All other Fox Forks: 190mm minimum RockShox Forks: 210mm minimum *Not compatible with Carbon Steerers or specialty sizes (some Giant and Cannondale) OneUp EDC Lite Tool Bike Multi-Tool UPC: 48062821942

by OneUp

—$89.99

Joining OneUp's all new Carbon Handlebar is the OneUp Stem. Designed for everything from trail riding to Enduro racing. The OneUp Stem can be used with a regular star nut and top cap like every other stem. It’s also compatible with existing threaded EDC top caps, for people who’ve already threaded their steerer tube. Or you can use the new OneUp Preloader (sold separately, you can find them here), which lets you store the EDC tool in your steerer without threading it. SPECS: Length: 35mm (157g) 50mm (173g) / 35mm Dia. / 0° Rise Colour: Black. Stack Height: 38.5mm Bar Clamp Width: 55mm Material: 6061-T6 Aluminum INSTRUCTIONS: Install bar. Top bar clamp bolts tighten down to stem body with no gap. Bottom bar clamp bolts will have a gap. Torque bolts to 6Nm Install silver stem plug onto steerer. Install stem onto steerer, align and tighten top 2 steerer bolts (9Nm). OneUp Stem 35mm Stems

by OneUp

—$49.99

OneUp Components Comp Platform Pedals, Orange The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. FEATURES 10 rear loading Steel pins / side, with Nyloc nuts DU plus cartridge bearing axle system Thin leading edge chamfered design to deflect off obstacles Wide platform design for increased stability Contoured shape provides ultimate connected feel SPECS Weight: 355g Platform Size: 115x105mm # of Pins: 10 per side Axle Material: Black chromoly steel Height: 18.5mm (13.3 at the leading edge) Pin to Axle distance: 108mm Color: Stealth Black, Red, Blue, Orange Body Material: Nylon Composite OneUp Comp Platform Pedals Pedals EAN: 0029862821943

by OneUp

—$49.99

OneUp Components Comp Platform Pedals, Red The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. FEATURES 10 rear loading Steel pins / side, with Nyloc nuts DU plus cartridge bearing axle system Thin leading edge chamfered design to deflect off obstacles Wide platform design for increased stability Contoured shape provides ultimate connected feel SPECS Weight: 355g Platform Size: 115x105mm # of Pins: 10 per side Axle Material: Black chromoly steel Height: 18.5mm (13.3 at the leading edge) Pin to Axle distance: 108mm Color: Stealth Black, Red, Blue, Orange Body Material: Nylon Composite OneUp Comp Platform Pedals Pedals EAN: 0029662821945

by OneUp

—$39.99

When OneUp came out with the EDC tool it changed the game for tool storage on your bike. Now, with the threadless carrier, you can switch over from the original threaded steerer option, or get that EDC hidden if you've got it externally mounted. If you don't have an EDC tool, don't worry, we sell those here too! The EDC Threadless carrier is the stealthiest way to have a full size OneUp EDC tool sitting nicely inside your steerer tube. If you thought the EDC Lite wasn't quite enough, this is the setup for you that fits all the essential tools inside your steerer tube! All you need to do is remove your star nut by knocking it all the way down the steerer, drop in and thread from the bottom. Just make sure to tension your headset properly! Features Compatible with the EDC V2 Tool *not included If you don't have an EDC tool, Click Here to complete your ultimate EDC kit! The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool) Easy to install in less than 5 mins. Color matched in anodize to OneUp Composite Pedals, Grips and Handlebar Decals! Keeps mud and debris out of the bottom of your steerer. **Needed Steerer tube length Ensure your fork is compatible - Very Important Incompatible forks: Fox 38 with oval steerer (Use a EDC Threaded install), Giant Overdrive 2 Forks. Cannondale Lefty Forks. Carbon Steerers **Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement. Fox (NO Fox 38) = 190mm min RockShox Forks = 220-265mm OneUp EDC Threadless Carrier Bike Multi-Tool EAN: 0049762821942

by OneUp

—$89.99

Joining OneUp's all new Carbon Handlebar is the OneUp Stem. Designed for everything from trail riding to Enduro racing. The OneUp Stem can be used with a regular star nut and top cap like every other stem. It’s also compatible with existing threaded EDC top caps, for people who’ve already threaded their steerer tube. Or you can use the new OneUp Preloader (sold separately, you can find them ,here), which lets you store the EDC tool in your steerer without threading it. SPECS: Length: 35mm (157g) 50mm (173g) / 35mm Dia. / 0° Rise Colour: Black. Stack Height: 38.5mm Bar Clamp Width: 55mm Material: 6061-T6 Aluminum INSTRUCTIONS: Install bar. Top bar clamp bolts tighten down to stem body with no gap. Bottom bar clamp bolts will have a gap. Torque bolts to 6Nm Install silver stem plug onto steerer. Install stem onto steerer, align and tighten top 2 steerer bolts (9Nm). OneUp Stem 35mm Stems

by OneUp

—$49.99

OneUp Components Comp Platform Pedals, Purple The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. FEATURES 10 rear loading Steel pins / side, with Nyloc nuts DU plus cartridge bearing axle system Thin leading edge chamfered design to deflect off obstacles Wide platform design for increased stability Contoured shape provides ultimate connected feel SPECS Weight: 355g Platform Size: 115x105mm # of Pins: 10 per side Axle Material: Black chromoly steel Height: 18.5mm (13.3 at the leading edge) Pin to Axle distance: 108mm Color: Stealth Black, Red, Blue, Orange Body Material: Nylon Composite Check out what one of our customer thinks of these pedals here OneUp Comp Platform Pedals Pedals

by OneUp

—$269.99

V3 DROPPER POST No Remote Included. Check Them Out here > V3 Dropper Remote Dropper Remote Adapter > V3 Dropper Remote Adapter Lighter, smoother and more reliable. Simply the best. Introducting the NEW OneUp Components V3 Dropper Post: An ultra lightweight, high performance, long travel dropper. OneUp's third generation dropper post has been over 3 years in the making. It's better than the award-winning V2 in every way. It's higher, longer, smoother,more reliable and has the shortest stack and total length of any other dropper. Now you get even more drop with the post. Lighter The new V3 is the lightest infinitely adjustable dropper on the marketat any given travel.It’s even lighter than XC specific lightweight droppers.The V3 is available in the widest range of travel options and suitable for all rider weights and riding styles. We’ve shaved weight from almost every single part to make the V3 Dropper 60 to 70 grams lighter than our V2.The biggest weight savings come from our new hydraulic cartridge that’s fully sealed and never needs to be inflated. The new V3 dropper is 238g lighter than a Reverb AXS, 155g lighter than a Transfer and up to 60g lighter than the 2-position Transfer SL. You can save an additional 10g with our Ti Bolt Upgrade Kit. Smoother Riders asked for improved seals,reduced play and smoother action from the V2.We’ve addressed all of these with the V3. Cartridge: For smoother action,the all-new cartridge requires 75% lessl ever force when the saddle is loaded and much less breakaway force to initiate.That means it’s even quicker and easier to drop your saddle while riding. Bushings: OneUp upgraded all the bushings to use a low-friction,self-lubricating IGUS material and increased bushing overlap to further reduce friction.180-240 drop posts have an additional bushing to further support the increased overlap. Seals: OneUp developed a completely new,high-performance collar with a custom SKF wiper seal to keep dirt out and grease in. The new seal and bushings keep the V3 running smoother for longer,with less maintenance. Pins: To eliminate rotational play without increasing friction, OneUp doubled the number of anti-rotation pins and added 2 oversized polymer pins. V3 Product Highlights 60-70g lighters 75% reduction in breakway force and smoother actuation Fully sealed cartridge that doesn't need to be inflated Compressed stack height is 3mm shorter Total length is 10mm shorter Increased bushing overlap IGUS bushings Low friction SKF Seal new cartridge is 100% recycable SPECS Warranty - 2 Years Routing - Internal Diameters - 30.9mm / 31.6mm / 34.9mm Travel - 90mm / 120mm / 150mm / 180mm / 210mm / 240mm Total Length - 295mm / 350mm / 415mm / 480mm / 545mm / 610mm Compressed Stack Height: 30mm (35mm for 34.9) Service and Maintenance Post can be fully disassembled using only a OneUp multi-tool in less than 10 minutes(14mmwrench,5mmHex,2mmHex) No custom tools required and no need to send your post away for maintenance No need to adjust or top up air pressure Longer service intervals: 120 hours for clean and grease / 350 hours for rebuild 2 year warranty OneUp V3 Dropper Seatpost Dropper Seatpost

by OneUp

—$159.99

The Most Compliant E-Bike Rated Bar On the Market. E-Bikes let you ride further for longer. They’re heavier and more physically demanding to ride. That makes reducing fatigue even more important. Our Carbon E-Bar is 20% more compliant than other carbon handlebars. That means more comfort and less fatigue on longer rides.. This is our most compliant handlebar yet and it’s equipped with integrated ports for E-Bike controls. Our patented oval design delivers a more comfortable ride without giving up any steering response or strength. The patented oval profile of all our handlebars minimizes arm pump with vertical compliance and maximizes steering response with lateral stiffness. The OneUp Carbon E-Bar is 20% more compliant than our competitors’ bars. That’s because the oval bar profile narrows to just 20mm to maximize vertical compliance. For reference, the thinnest portion of a traditional handlebar is 22.2mm. Carbon E-Bar has internal routing for Shimano STEPS switch units and it passes the stringent Zedler E-MTB Advanced Plus standard and the international DH standard (ASTM Cat. 5 Downhill). COMPATIBILITY The OneUp E-Bar features internal routing for Shimano STEPS switch units and all other switch units with a connector diameter less than 6.5mm. The wire port diameter in the bar is 6.5mm and the minimum switch wire length required to internally route is 650mm. Specialized, Bosch or Rocky Mountain remote power mode controllers cannot be internally routed through the Carbon E-Bar. If you have a switch with a removable wire (EP8 or E8000) you can install a 650mm or longer Shimano EW-SD50 wire. The Orbea Rise does not have a handlebar mounted display unit as it connects to your smartphone. It has the EW-EN100 junction and removable EW-SD50 wire. If you don’t have a removable wire on your switch, you need to buy a new switch with a removable wire (SW-E7000-L) with a wire length of at least 700mm. Or you you can add the EW-JC200 2 port junction and an EW-SD50 extension wire. Grips with a single outer clamp are NOT compatible with this bar. Control Bar ends (Bull Horns) are NOT compatible with this bar. Specs: Geometry: 800mm Wide/ 35mm Dia./ Sweep 8° Back 5° Up Weight: 35mm Rise (238g) Stealth Routing: Wire ports & grooves for controller Minimum Trim width: 740mm OneUp Carbon E-Handlebar Flat/Riser Handlebar

by OneUp

—$15

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$64.99

OneUp Components EDC Pump 70cc (Tool sold separately) The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish. Don't be that guy on the trail! Make sure to be prepared on every ride and not be stuck walking your bike back. 70cc Pump holds EDC Tool (no Storage Capsule) or a 20g CO2 Fast-On Head (Presta Only) - No threads or locking levers Integrated CO2 Inflator Fully Sealed, Weatherproofed Internals Includes Bottle Cage Mount Material: 6061-T6 135g (without EDC tool system) PUMP VOLUME A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market. Fast-On Head Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump. OneUp EDC Pump Frame Pump UPC: 0024862821948

by OneUp

—$15

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$149.99

The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, the OneUp Aluminum Pedals won't slow you down on the climbs. The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, the OneUp Aluminum Pedals won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More. Each pedal contains 4 double sealed full cartridge bearing and no bushings, to eliminate axle play and provide ultimate long-term durability. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy. Available in 8 colors, Black, Blue, Red, Orange, Purple, Green, Oil Slick and Grey. Compatibility SRAM carbon cranks - Due to the deep counterbore of these crank arms, OneUp Alloy pedals are not compatible with SRAM carbon cranks. Crank boots - OneUp Alloy pedals are not compatible with protective crank boots. We recommend removing crank boots before installation. Features 10 rear loading custom hexagonal removable pins per side for maximum grip 4 sealed cartridge bearings per pedal Ultra thin leading edge chamfered design to deflect off any obstacle Fully sealed and serviceable design with built in bearing extractor Wide platform design for increased stability Contoured shape provides ultimate connected feel 355g Platform Size: 115x105mm Axle Material: Chromoly steel Height: 8.3-12mm Pin to Axle distance: 112mm Body Material: 6061-T6 Aluminum OneUp Aluminum Platform Pedals Pedals

by OneUp

—$44.99

**No Clamp Included** [CLICK HERE] V3 Dropper Adapters / Clamps Upgrade Any Dropper The V3 Dropper Remote is a lighter action remote with a replaceable rubber thumb pad and integrated cable port. Available in 7 colours, all major clamp standards and as a remote only option so you can reuse your existing V2 clamp. It's the easiest way to upgrade any mechanical dropper. /P> Replaceble Rubber Thumb Pad A grippy rubber thumb pad improves lever feel and can be colour matched to your bike. The integrated cable port with cut marks makes installing your remote even easier. It also keeps your cable end tidy and lets you install without a cable crimp for a super clean look. Lighter Action Design The new lever cam reduces the thumb force needed to actuate your dropper post. It requires 27% less actuation force than our V2 remote. Upgrading your remote is a quick and easy way to improve the feel of any mechanical dropper post for less than $50. Easy Install The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. The integrated cable port includes cut marks that take the guess work out of cutting your cable and lets you tuck the cable away for you a super clean look. Compatible with all cable actuated dropper posts. Kit Includes 1 Remote body 1 black thumb cushion Cable, housing, cable end & barrel end Specs Weight: Remote with 22.2mm Bar Clamp - 45g Remote with 31.8mm Bar Clamp - 49g Remote with SRAM Matchmaker X - 43g Remote with Shimano I-spec-EV - 45g Remote with Shimano I-spec II - 40g Remote Only- 29g Compatibility 22.2mm Bar Clamp - All SRAM Matchmaker X - SRAM MMX clamps Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100 Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M7000 only Not compatible with 2x/3x systems (Front shifters), or remote lock out systems Not compatible with V1 OneUp Remote clamps INSTALL INSTRUCTIONS OneUp Components V3 Dropper Post, 30.9mm OneUp Components V3 Dropper Post, 31.6mm OneUp Components V3 Dropper Post, 34.9mm OneUp V3 Dropper Post Remote Dropper Seatpost Remote UPC: 0057262821942

by OneUp

—$89.99

Joining OneUp's all new Carbon Handlebar is the OneUp Stem. Designed for everything from trail riding to Enduro racing. The OneUp Stem can be used with a regular star nut and top cap like every other stem. It’s also compatible with existing threaded EDC top caps, for people who’ve already threaded their steerer tube. Or you can use the new OneUp Preloader (sold separately, you can find them here), which lets you store the EDC tool in your steerer without threading it. SPECS: Length: 35mm (157g) 42mm (163g) 50mm (173g) / 35mm Dia. / 0° Rise Colour: Black. Stack Height: 39mm Bar Clamp Width: 55mm Material: 6061-T6 Aluminum INSTRUCTIONS: Install bar. Top bar clamp bolts tighten down to stem body with no gap. Bottom bar clamp bolts will have a gap. Torque bolts to 6Nm Install stem onto steerer, align and tighten top 2 steerer bolts (9Nm). OneUp Stem 35mm Stems

by OneUp

—$49.99

OneUp Components Comp Platform Pedals, Blue The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. FEATURES 10 rear loading Steel pins / side, with Nyloc nuts DU plus cartridge bearing axle system Thin leading edge chamfered design to deflect off obstacles Wide platform design for increased stability Contoured shape provides ultimate connected feel SPECS Weight: 355g Platform Size: 115x105mm # of Pins: 10 per side Axle Material: Black chromoly steel Height: 18.5mm (13.3 at the leading edge) Pin to Axle distance: 108mm Color: Stealth Black, Red, Blue, Orange Body Material: Nylon Composite OneUp Comp Platform Pedals Pedals EAN: 0029762821944

by OneUp

—$16.99

Depending on the variant selected, these clamps/adapters allow users to mount their OneUp Components Dropper Remote (V2 or V3) to their Shimano I-SPEC-II brake lever (I-SPEC-II Adapter), Avid/SRAM MMX bar mount (SRAM MMX Adapter), Shimano I-Spec EV (I-Spec EV Adapter), flat bars (22.2 Clamp), or drop bars (31.8 clamp). The SRAM MMX, Shimano I-Spec EV, and the I-SPEC-II Adapters are not a clamps - these adapters allows the mounting/attachment of the remote body to a riders pre-existing clamp/brake mount. The 31.8 Clamp and the 22.2 Clamp are stand-alone clamps - these clamps allows the mounting/attachment of the remote body to a riders bars who do not have or do not want to attach the dropper remote body to a pre-existing clamp/brake mount. This product does not contain a remote body. This product is not a universal product, it will only work to attach/mount a OneUp Components Dropper Remote body (V2 or V3). The 31.8 Adapter is for use with drop bars only. [CLICK HERE] V3 Dropper Remote [CLICK HERE] OneUp Components V3 Dropper Post, 30.9mm [CLICK HERE] OneUp Components V3 Dropper Post, 31.6mm [CLICK HERE] OneUp Components V3 Dropper Post, 34.9mm OneUp V3 Dropper Remote Clamp Dropper Seatpost Part

by OneUp

—$15

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$149.99

The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, the OneUp Aluminum Pedals won't slow you down on the climbs. The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, the OneUp Aluminum Pedals won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More. Each pedal contains 4 double sealed full cartridge bearing and no bushings, to eliminate axle play and provide ultimate long-term durability. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy. Available in 8 colors, Black, Blue, Red, Orange, Purple, Green, Oil Slick and Grey. Compatibility SRAM carbon cranks - Due to the deep counterbore of these crank arms, OneUp Alloy pedals are not compatible with SRAM carbon cranks. Crank boots - OneUp Alloy pedals are not compatible with protective crank boots. We recommend removing crank boots before installation. Features 10 rear loading custom hexagonal removable pins per side for maximum grip 4 sealed cartridge bearings per pedal Ultra thin leading edge chamfered design to deflect off any obstacle Fully sealed and serviceable design with built in bearing extractor Wide platform design for increased stability Contoured shape provides ultimate connected feel 355g Platform Size: 115x105mm Axle Material: Chromoly steel Height: 8.3-12mm Pin to Axle distance: 112mm Body Material: 6061-T6 Aluminum OneUp Aluminum Platform Pedals Pedals

by OneUp

—$89.99

ONEUP ALLOY BARS. Strong, lightweight & vertically compliant. The award-winning vibration damping of OneUp Components Carbon Handlebar is now available in aluminum. The new Aluminum Handlebar uses our patented oval handlebar shape to deliver increased vertical compliance without sacrificing steering stiffness. This noticeably reduces hand fatigue, so you can ride harder for longer. Get carbon performance at an aluminum price. Specs: Rise:20mm and 35mm Options Clamp Diameter:35mm Width: : 800mm Upsweep:5° Backsweep:8° Weight:337g Material: 7050 - T76 Aluminum OneUp Alloy Handlebar Flat/Riser Handlebar

by OneUp

—$149.99

The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, the OneUp Aluminum Pedals won't slow you down on the climbs. The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, the OneUp Aluminum Pedals won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More. Each pedal contains 4 double sealed full cartridge bearing and no bushings, to eliminate axle play and provide ultimate long-term durability. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy. Available in 8 colors, Black, Blue, Red, Orange, Purple, Green, Oil Slick and Grey. Compatibility SRAM carbon cranks - Due to the deep counterbore of these crank arms, OneUp Alloy pedals are not compatible with SRAM carbon cranks. Crank boots - OneUp Alloy pedals are not compatible with protective crank boots. We recommend removing crank boots before installation. Features 10 rear loading custom hexagonal removable pins per side for maximum grip 4 sealed cartridge bearings per pedal Ultra thin leading edge chamfered design to deflect off any obstacle Fully sealed and serviceable design with built in bearing extractor Wide platform design for increased stability Contoured shape provides ultimate connected feel 355g Platform Size: 115x105mm Axle Material: Chromoly steel Height: 8.3-12mm Pin to Axle distance: 112mm Body Material: 6061-T6 Aluminum OneUp Aluminum Platform Pedals Pedals

by OneUp

—$269.99

V3 DROPPER POST No Remote Included. Check Them Out here > V3 Dropper Remote Dropper Remote Adapter > V3 Dropper Remote Adapter Lighter, smoother and more reliable. Simply the best. Introducting the NEW OneUp Components V3 Dropper Post: An ultra lightweight, high performance, long travel dropper. OneUp's third generation dropper post has been over 3 years in the making. It's better than the award-winning V2 in every way. It's higher, longer, smoother,more reliable and has the shortest stack and total length of any other dropper. Now you get even more drop with the post. Lighter The new V3 is the lightest infinitely adjustable dropper on the marketat any given travel.It’s even lighter than XC specific lightweight droppers.The V3 is available in the widest range of travel options and suitable for all rider weights and riding styles. We’ve shaved weight from almost every single part to make the V3 Dropper 60 to 70 grams lighter than our V2.The biggest weight savings come from our new hydraulic cartridge that’s fully sealed and never needs to be inflated. The new V3 dropper is 238g lighter than a Reverb AXS, 155g lighter than a Transfer and up to 60g lighter than the 2-position Transfer SL. You can save an additional 10g with our Ti Bolt Upgrade Kit. Smoother Riders asked for improved seals,reduced play and smoother action from the V2.We’ve addressed all of these with the V3. Cartridge: For smoother action,the all-new cartridge requires 75% lessl ever force when the saddle is loaded and much less breakaway force to initiate.That means it’s even quicker and easier to drop your saddle while riding. Bushings: OneUp upgraded all the bushings to use a low-friction,self-lubricating IGUS material and increased bushing overlap to further reduce friction.180-240 drop posts have an additional bushing to further support the increased overlap. Seals: OneUp developed a completely new,high-performance collar with a custom SKF wiper seal to keep dirt out and grease in. The new seal and bushings keep the V3 running smoother for longer,with less maintenance. Pins: To eliminate rotational play without increasing friction, OneUp doubled the number of anti-rotation pins and added 2 oversized polymer pins. V3 Product Highlights 60-70g lighters 75% reduction in breakway force and smoother actuation Fully sealed cartridge that doesn't need to be inflated Compressed stack height is 3mm shorter Total length is 10mm shorter Increased bushing overlap IGUS bushings Low friction SKF Seal new cartridge is 100% recycable SPECS Warranty - 2 Years Routing - Internal Diameters - 30.9mm / 31.6mm / 34.9mm Travel - 90mm / 120mm / 150mm / 180mm / 210mm / 240mm Total Length - 295mm / 350mm / 415mm / 480mm / 545mm / 610mm Compressed Stack Height: 30mm (35mm for 34.9) Service and Maintenance Post can be fully disassembled using only a OneUp multi-tool in less than 10 minutes(14mmwrench,5mmHex,2mmHex) No custom tools required and no need to send your post away for maintenance No need to adjust or top up air pressure Longer service intervals: 120 hours for clean and grease / 350 hours for rebuild 2 year warranty OneUp V3 Dropper Seatpost Dropper Seatpost

by OneUp

—$49.99

OneUp Components Comp Platform Pedals, Green The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. FEATURES 10 rear loading Steel pins / side, with Nyloc nuts DU plus cartridge bearing axle system Thin leading edge chamfered design to deflect off obstacles Wide platform design for increased stability Contoured shape provides ultimate connected feel SPECS Weight: 355g Platform Size: 115x105mm # of Pins: 10 per side Axle Material: Black chromoly steel Height: 18.5mm (13.3 at the leading edge) Pin to Axle distance: 108mm Color: Stealth Black, Red, Blue, Orange Body Material: Nylon Composite OneUp Comp Platform Pedals Pedals EAN: 0020562821943

by OneUp

—$26.99

OneUp's Thick Grips are designed to maximize grip and minimize arm pump by giving you extra cushioning, a softer compound and added features for a fully locked in feel. The subtle palm bulge and ridges on the underside fit in the creases of your fingers for a locked-in feel.   Item Specifications Diameter 35 mm Max , 32.5mm Min Length 138mm Weight 144g (Pair) OneUp Thick Grips Grip

by OneUp

—$39.99

When OneUp came out with the EDC tool it changed the game for tool storage on your bike. Now, if you haven't gotten one yet because you didn't want to tap your steerer or it just seemed like too much, this is the tool for you! The EDC Lite is the ultimate in simplicity for having tools stashed on your bike. It's insanely easy to install and hardly any more expensive than some multi-tools by themselves. If you've been putting off getting an EDC or just want a simple little multi-tool on your bike, this is arguably one of the best options. It's cheap enough that's it's just worth a try, you won't be sorry! EDC Lite is a 9 function Multi Tool which contains your most used tools and is designed to live inside your stem/steerer tube. Never get stuck without a Multi Tool on a ride ever again. The EDC Lite Kit includes the 9-function tool and everything you need to install and store it in your stem/steerer tube. Features Allen Keys: 2, 2.5, 3, 4, 5, 6, 8mm Torx key: T25 Torx Other Tools: Flat Head Screwdriver Light weight (Adds just 75g to your bike) Easy to install in less than 5 mins. Color matched to OneUp Composite Pedals, Grips and Handlebar Decals. Not compatible with Carbon Steerers or specialty sizes (some Giant and Cannondale) **Needed Steerer tube length Fox 38: 210mm minimum All other Fox Forks: 190mm minimum RockShox Forks: 210mm minimum *Not compatible with Carbon Steerers or specialty sizes (some Giant and Cannondale) OneUp EDC Lite Tool Bike Multi-Tool UPC: 48662821946

by OneUp

—$15

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$10.99

If the plain black graphics of your OneUp carbon bars are not quite load enough for your bike you can customize the decal color of your OneUp Carbon Handlebar with this vinyl decal kit. Also includes extra decals for your bike, helmet, truck or dog*. Choose from 7 great colors. *OneUp does not recommend applying decals to animals. OneUp Decal Kit Sticker/Decal

by OneUp

—$17.98

Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your OneUp Components Dropper post by lowering the travel and extended length of your post by either 10mm or 20mm. A 180mm travel post can be reduced in travel to either 170mm or 160mm with this shim kit.Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap and alignment pin length, which is great for heavier riders. 210mm Dropper Post - adjustable down to 190mm 180mm Dropper Post - adjustable down to 160mm 150mm Dropper Post - adjustable down to 130mm 120mm Dropper Post - adjustable down to 100mm OneUp Dropper Post Shim Dropper Seatpost Part

by OneUp

—$149.99

The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, the OneUp Aluminum Pedals won't slow you down on the climbs. The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, the OneUp Aluminum Pedals won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More. Each pedal contains 4 double sealed full cartridge bearing and no bushings, to eliminate axle play and provide ultimate long-term durability. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy. Available in 8 colors, Black, Blue, Red, Orange, Purple, Green, Oil Slick and Grey. Compatibility SRAM carbon cranks - Due to the deep counterbore of these crank arms, OneUp Alloy pedals are not compatible with SRAM carbon cranks. Crank boots - OneUp Alloy pedals are not compatible with protective crank boots. We recommend removing crank boots before installation. Features 10 rear loading custom hexagonal removable pins per side for maximum grip 4 sealed cartridge bearings per pedal Ultra thin leading edge chamfered design to deflect off any obstacle Fully sealed and serviceable design with built in bearing extractor Wide platform design for increased stability Contoured shape provides ultimate connected feel 355g Platform Size: 115x105mm Axle Material: Chromoly steel Height: 8.3-12mm Pin to Axle distance: 112mm Body Material: 6061-T6 Aluminum OneUp Aluminum Platform Pedals Pedals

by OneUp

—$10.99

If the plain black graphics of your OneUp carbon bars are not quite load enough for your bike you can customize the decal color of your OneUp Carbon Handlebar with this vinyl decal kit. Also includes extra decals for your bike, helmet, truck or dog*. Choose from 7 great colors. *OneUp does not recommend applying decals to animals. OneUp Decal Kit Sticker/Decal

by OneUp

—$39.99

When OneUp came out with the EDC tool it changed the game for tool storage on your bike. Now, with the threadless carrier, you can switch over from the original threaded steerer option, or get that EDC hidden if you've got it externally mounted. If you don't have an EDC tool, don't worry, we sell those here too! The EDC Threadless carrier is the stealthiest way to have a full size OneUp EDC tool sitting nicely inside your steerer tube. If you thought the EDC Lite wasn't quite enough, this is the setup for you that fits all the essential tools inside your steerer tube! All you need to do is remove your star nut by knocking it all the way down the steerer, drop in and thread from the bottom. Just make sure to tension your headset properly! Features Compatible with the EDC V2 Tool *not included If you don't have an EDC tool, Click Here to complete your ultimate EDC kit! The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool) Easy to install in less than 5 mins. Color matched in anodize to OneUp Composite Pedals, Grips and Handlebar Decals! Keeps mud and debris out of the bottom of your steerer. **Needed Steerer tube length Ensure your fork is compatible - Very Important Incompatible forks: Fox 38 with oval steerer (Use a EDC Threaded install), Giant Overdrive 2 Forks. Cannondale Lefty Forks. Carbon Steerers **Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement. Fox (NO Fox 38) = 190mm min RockShox Forks = 220-265mm OneUp EDC Threadless Carrier Bike Multi-Tool EAN: 0049862821941

by OneUp

—$39.99

When OneUp came out with the EDC tool it changed the game for tool storage on your bike. Now, if you haven't gotten one yet because you didn't want to tap your steerer or it just seemed like too much, this is the tool for you! The EDC Lite is the ultimate in simplicity for having tools stashed on your bike. It's insanely easy to install and hardly any more expensive than some multi-tools by themselves. If you've been putting off getting an EDC or just want a simple little multi-tool on your bike, this is arguably one of the best options. It's cheap enough that's it's just worth a try, you won't be sorry! EDC Lite is a 9 function Multi Tool which contains your most used tools and is designed to live inside your stem/steerer tube. Never get stuck without a Multi Tool on a ride ever again. The EDC Lite Kit includes the 9-function tool and everything you need to install and store it in your stem/steerer tube. Features Allen Keys: 2, 2.5, 3, 4, 5, 6, 8mm Torx key: T25 Torx Other Tools: Flat Head Screwdriver Light weight (Adds just 75g to your bike) Easy to install in less than 5 mins. Color matched to OneUp Composite Pedals, Grips and Handlebar Decals. Not compatible with Carbon Steerers or specialty sizes (some Giant and Cannondale) **Needed Steerer tube length Fox 38: 210mm minimum All other Fox Forks: 190mm minimum RockShox Forks: 210mm minimum *Not compatible with Carbon Steerers or specialty sizes (some Giant and Cannondale) OneUp EDC Lite Tool Bike Multi-Tool UPC: 48562821947

by OneUp

—$15

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$179.99

The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, the OneUp Aluminum Pedals won't slow you down on the climbs. The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, the OneUp Aluminum Pedals won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More. Each pedal contains 4 double sealed full cartridge bearing and no bushings, to eliminate axle play and provide ultimate long-term durability. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy. Available in 8 colors, Black, Blue, Red, Orange, Purple, Green, Oil Slick and Grey. Compatibility SRAM carbon cranks - Due to the deep counterbore of these crank arms, OneUp Alloy pedals are not compatible with SRAM carbon cranks. Crank boots - OneUp Alloy pedals are not compatible with protective crank boots. We recommend removing crank boots before installation. Features 10 rear loading custom hexagonal removable pins per side for maximum grip 4 sealed cartridge bearings per pedal Ultra thin leading edge chamfered design to deflect off any obstacle Fully sealed and serviceable design with built in bearing extractor Wide platform design for increased stability Contoured shape provides ultimate connected feel 355g Platform Size: 115x105mm Axle Material: Chromoly steel Height: 8.3-12mm Pin to Axle distance: 112mm Body Material: 6061-T6 Aluminum OneUp Aluminum Platform Pedals Pedals EAN: 0052462821945

by OneUp

—$29

OneUp Components EDC Top Cap, Orange The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes.  Check fork compatibility.   KIT INCLUDES EDC TOP CAP EDC steerer plug 2x 1mm, 3mm, & 5mm Headset Spacers    INSTALL THE EDC TOP CAP You need a minimum of 5mm of headset spacer above the stem and your steerer tube should be 1-2mm below the top of this spacer. Apply a small amount of grease to your newly cut thread and screw in your new EDC top cap. The Top Cap interface uses a standard cassette lockring tool. You do not need to apply much torque as you are only preloading the bearings. (Your stem pinch bolts are what holds your fork in place). The EDC multitool contains a top cap tightening tool. So even when riding you always have the ability to tighten your headset if need be.  Align your stem and tighten your stem bolts to the manufacturers recommended torque.  The final step is to insert the plastic bung/plug into the bottom of your fork. Turn your 8mm hex sideways and use it to push the plug into the fork by pulling the 8mm towards your chest. This piece holds the bottom of the EDC Tool and stops it from rattling. It also keeps dirt out of your fork and has a small drain hole. Note* The EDC Tap kit includes a star nut puller and self aligning tap Patents Pending All compatibility and fit determinations have been made solely by OneUp. Use of this or any other aftermarket product may void any warranty you have with the original part manufacturer. OneUp EDC Top Cap Headset Tool

by OneUp

—$39.99

When OneUp came out with the EDC tool it changed the game for tool storage on your bike. Now, if you haven't gotten one yet because you didn't want to tap your steerer or it just seemed like too much, this is the tool for you! The EDC Lite is the ultimate in simplicity for having tools stashed on your bike. It's insanely easy to install and hardly any more expensive than some multi-tools by themselves. If you've been putting off getting an EDC or just want a simple little multi-tool on your bike, this is arguably one of the best options. It's cheap enough that's it's just worth a try, you won't be sorry! EDC Lite is a 9 function Multi Tool which contains your most used tools and is designed to live inside your stem/steerer tube. Never get stuck without a Multi Tool on a ride ever again. The EDC Lite Kit includes the 9-function tool and everything you need to install and store it in your stem/steerer tube. Features Allen Keys: 2, 2.5, 3, 4, 5, 6, 8mm Torx key: T25 Torx Other Tools: Flat Head Screwdriver Light weight (Adds just 75g to your bike) Easy to install in less than 5 mins. Color matched to OneUp Composite Pedals, Grips and Handlebar Decals. Not compatible with Carbon Steerers or specialty sizes (some Giant and Cannondale) **Needed Steerer tube length Fox 38: 210mm minimum All other Fox Forks: 190mm minimum RockShox Forks: 210mm minimum *Not compatible with Carbon Steerers or specialty sizes (some Giant and Cannondale) OneUp EDC Lite Tool Bike Multi-Tool UPC: 89362821949

by OneUp

—$39.99

When OneUp came out with the EDC tool it changed the game for tool storage on your bike. Now, if you haven't gotten one yet because you didn't want to tap your steerer or it just seemed like too much, this is the tool for you! The EDC Lite is the ultimate in simplicity for having tools stashed on your bike. It's insanely easy to install and hardly any more expensive than some multi-tools by themselves. If you've been putting off getting an EDC or just want a simple little multi-tool on your bike, this is arguably one of the best options. It's cheap enough that's it's just worth a try, you won't be sorry! EDC Lite is a 9 function Multi Tool which contains your most used tools and is designed to live inside your stem/steerer tube. Never get stuck without a Multi Tool on a ride ever again. The EDC Lite Kit includes the 9-function tool and everything you need to install and store it in your stem/steerer tube. Features Allen Keys: 2, 2.5, 3, 4, 5, 6, 8mm Torx key: T25 Torx Other Tools: Flat Head Screwdriver Light weight (Adds just 75g to your bike) Easy to install in less than 5 mins. Color matched to OneUp Composite Pedals, Grips and Handlebar Decals. Not compatible with Carbon Steerers or specialty sizes (some Giant and Cannondale) **Needed Steerer tube length Fox 38: 210mm minimum All other Fox Forks: 190mm minimum RockShox Forks: 210mm minimum *Not compatible with Carbon Steerers or specialty sizes (some Giant and Cannondale) OneUp EDC Lite Tool Bike Multi-Tool UPC: 48162821941

by OneUp