Headset Tool

—$39.99

OneUp Components EDC Plug & Pliers Kit, Green   The EDC PLUG & PLIERS KIT is the perfect addition to the EDC tool system. The tire plug Jabber Tool threads directly into the EDC carrier. The new Quick Link Breaker Pliers are compatible with all 10,11, and 12 speed quick links chains. Both new tools and bacon strips store perfectly within the EDC capsule ready for race day deployment. KIT INCLUDES Quick Link Breaker Pliers (10, 11, 12SP)  Tire Plug Jabber Tool 15 - Bacon Strips SPEC Material:  aluminum/steel/bacon Weight: 17g all in COMPATIBILITY The complete Plug and Pliers kit fits inside the Stash Capsule of the 100cc Pump and Steerer tube setup. The Stash capsule does NOT fit inside the 70cc pump. You cannot store the pliers in the 70cc Pump. Although the Jabber and Tubeless plugs will fit inside. Colors:  GREEN   OneUp EDC Headset Tool EAN: 0030062821947 MPN: 1C0540

by OneUp

—$39.99

OneUp Components EDC tap kit Tap used to cup threads into 1-1/8" threadless alloy steerer for EDC top capy OneUp EDC Tap Headset Tool UPC: 023762821942 MPN: 1C0416BLK

by OneUp

—$28.99

OneUp Components EDC top cap, black Special headset preloader top cap for EDC tool Requires threads to be cut into 1-1/8" threadless alloy steerer using EDC tap Cassette-type lockring adjusts headset preload, uses common cassette lockring tool OneUp EDC Top Cap Headset Tool MPN: 1C0414BLK

by OneUp

—$28.95

High quality tools ensure that headsets are properly serviced. Park Tool Threadless Nut Setters Headset Tool UPC: 763477008008 MPN: TNS-1

by Park Tool

—$104.95

High quality tools ensure that headsets are properly serviced.Designed to install all sizes of head cups and one-piece bottom bracket cups Park Tool Headset Tools Headset Tool UPC: 763477004321 MPN: HHP-3

by Park Tool

—$58.95

High quality tools ensure that headsets are properly serviced. Park Tool Threadless Nut Setters Headset Tool UPC: 763477008039 MPN: TNS-4

by Park Tool

—$47.95

High quality tools ensure that headsets are properly serviced. The RT-2 is specially designed for removing 1-1/4" and 1.5" head cups RT-2's flared end fits through the head tube and snaps behind the cup, allowing the cup to be removed with a tap of a hammer Durable, heat treated, alloy steel with nickel finish for long life Heat-treated CroMoly Park Tool Headset Tools Headset Tool UPC: 763477006011 MPN: RT-2

by Park Tool

—$42.95

High quality tools ensure that headsets are properly serviced. Fits 1", 1-1/8", 1-1/4" Heat treated CroMo Park Tool Headset Tools Headset Tool UPC: 763477006004 MPN: RT-1

by Park Tool

—$252.95

High quality tools ensure that headsets are properly serviced.Fits all sizes Park Tool Headset Tools Headset Tool UPC: 763477004314 MPN: HHP-2

by Park Tool

—$137.95

Park Tool high quality tools ensure that headsets are properly serviced. Oversized Crown Race Setting System uses two different insert rings to install bearing races on 1.5" and 1-1/4" forks The bearing surface is spared a direct hit by using an aluminum insert Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately Included extension allows work on fork steering tubes up to 425mm SHIS terminology: The CRS-15 services crown races in SHIS 33 and 40 Park Tool Headset Tools Headset Tool UPC: 763477002174 MPN: CRS-15.2

by Park Tool

—$28.99

OneUp Components EDC Top Cap, Orange The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes.  Check fork compatibility.   KIT INCLUDES EDC TOP CAP EDC steerer plug 2x 1mm, 3mm, & 5mm Headset Spacers    INSTALL THE EDC TOP CAP You need a minimum of 5mm of headset spacer above the stem and your steerer tube should be 1-2mm below the top of this spacer. Apply a small amount of grease to your newly cut thread and screw in your new EDC top cap. The Top Cap interface uses a standard cassette lockring tool. You do not need to apply much torque as you are only preloading the bearings. (Your stem pinch bolts are what holds your fork in place). The EDC multitool contains a top cap tightening tool. So even when riding you always have the ability to tighten your headset if need be.  Align your stem and tighten your stem bolts to the manufacturers recommended torque.  The final step is to insert the plastic bung/plug into the bottom of your fork. Turn your 8mm hex sideways and use it to push the plug into the fork by pulling the 8mm towards your chest. This piece holds the bottom of the EDC Tool and stops it from rattling. It also keeps dirt out of your fork and has a small drain hole. Note* The EDC Tap kit includes a star nut puller and self aligning tap Patents Pending All compatibility and fit determinations have been made solely by OneUp. Use of this or any other aftermarket product may void any warranty you have with the original part manufacturer. OneUp EDC Top Cap Headset Tool MPN: 1C0414ORA

by OneUp

—$22.43

This adapter tool alows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminum billet. Fits Park Tool CRS-15.2 crown race setting tube Design and manufactured in Minneapolis, MN USA Material - aircraft grade aluminum Wolf Tooth Crown Race Installation Adaptor Headset Tool UPC: 812719028349 MPN: HS-CRI40

by Wolf Tooth

—$28.99

OneUp Components EDC Top Cap, Red The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes.  Check fork compatibility.   KIT INCLUDES EDC TOP CAP EDC steerer plug 2x 1mm, 3mm, & 5mm Headset Spacers    INSTALL THE EDC TOP CAP You need a minimum of 5mm of headset spacer above the stem and your steerer tube should be 1-2mm below the top of this spacer. Apply a small amount of grease to your newly cut thread and screw in your new EDC top cap. The Top Cap interface uses a standard cassette lockring tool. You do not need to apply much torque as you are only preloading the bearings. (Your stem pinch bolts are what holds your fork in place). The EDC multitool contains a top cap tightening tool. So even when riding you always have the ability to tighten your headset if need be.  Align your stem and tighten your stem bolts to the manufacturers recommended torque.  The final step is to insert the plastic bung/plug into the bottom of your fork. Turn your 8mm hex sideways and use it to push the plug into the fork by pulling the 8mm towards your chest. This piece holds the bottom of the EDC Tool and stops it from rattling. It also keeps dirt out of your fork and has a small drain hole. Note* The EDC Tap kit includes a star nut puller and self aligning tap Patents Pending All compatibility and fit determinations have been made solely by OneUp. Use of this or any other aftermarket product may void any warranty you have with the original part manufacturer. OneUp EDC Top Cap Headset Tool MPN: 1C0414RED

by OneUp

—$17.99

Headset cup installation adapters allow for precise installation of Cane Creek headsets and prevent damage to both the cups and press. Precision engineered in Fletcher, NC in that one side can be used with cups featuring non-removable bearings (pressure is applied precisely on the outer race, preserving the integrity of the bearing itself), while the other is used for cups featuring removable bearings (pressure is applied to the cup race via a chamfered surface, reducing the risk of slippage) Hard anodized AL7075 to reduce wear Intended to be used in concert with a headset press tool to install any press-fit headset configuration Cane Creek Install Adaptors Headset Tool UPC: 840226084985 MPN: HST014

by Cane Creek

—$28.99

OneUp Components EDC Top Cap, Green The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes.  Check fork compatibility.   KIT INCLUDES EDC TOP CAP EDC steerer plug 2x 1mm, 3mm, & 5mm Headset Spacers    INSTALL THE EDC TOP CAP You need a minimum of 5mm of headset spacer above the stem and your steerer tube should be 1-2mm below the top of this spacer. Apply a small amount of grease to your newly cut thread and screw in your new EDC top cap. The Top Cap interface uses a standard cassette lockring tool. You do not need to apply much torque as you are only preloading the bearings. (Your stem pinch bolts are what holds your fork in place). The EDC multitool contains a top cap tightening tool. So even when riding you always have the ability to tighten your headset if need be.  Align your stem and tighten your stem bolts to the manufacturers recommended torque.  The final step is to insert the plastic bung/plug into the bottom of your fork. Turn your 8mm hex sideways and use it to push the plug into the fork by pulling the 8mm towards your chest. This piece holds the bottom of the EDC Tool and stops it from rattling. It also keeps dirt out of your fork and has a small drain hole. Note* The EDC Tap kit includes a star nut puller and self aligning tap Patents Pending All compatibility and fit determinations have been made solely by OneUp. Use of this or any other aftermarket product may void any warranty you have with the original part manufacturer. OneUp EDC Top Cap Headset Tool MPN: 1C0414GRN

by OneUp

—$28.95

Features the Y-head design with lazer cut openings to ensure a tight, accurate fit. Park Tool Headset Wrench Headset Tool UPC: 763477004154 MPN: HCW-15

by Park Tool

—$269.95

High quality tools ensure that headsets are properly serviced. Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork New for 2013, the tool is fully adjustable, allowing precise, independent positioning of each blade around the crown race Locating each blade independently provides flexibility to fit around crown race interferences Universal design works with 1", 1-1/8", 1-1/4" and 1.5 forks (suspension or rigid) and crown races with outside diameters up to 64mm Accepts steering columns up to 430mm in length All steel construction Park Tool Headset Tools Headset Tool UPC: 763477002129 MPN: CRP-2

by Park Tool

—$109.95

High quality tools ensure that headsets are properly serviced. Includes: one universal setting tube, three 1" inserts, and three 1-1/8" inserts Works on forks of 340mm column length or less By using different inserts to ensure proper fit on the race, the bearing surface is spared damage The CRS-1 services in SHIS sizes 26, 27, 30 Park Tool Headset Tools Headset Tool UPC: 763477002181 MPN: CRS-1

by Park Tool

—$28.99

OneUp Components EDC Top Cap, Purple The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes.  Check fork compatibility.   KIT INCLUDES EDC TOP CAP EDC steerer plug 2x 1mm, 3mm, & 5mm Headset Spacers    INSTALL THE EDC TOP CAP You need a minimum of 5mm of headset spacer above the stem and your steerer tube should be 1-2mm below the top of this spacer. Apply a small amount of grease to your newly cut thread and screw in your new EDC top cap. The Top Cap interface uses a standard cassette lockring tool. You do not need to apply much torque as you are only preloading the bearings. (Your stem pinch bolts are what holds your fork in place). The EDC multitool contains a top cap tightening tool. So even when riding you always have the ability to tighten your headset if need be.  Align your stem and tighten your stem bolts to the manufacturers recommended torque.  The final step is to insert the plastic bung/plug into the bottom of your fork. Turn your 8mm hex sideways and use it to push the plug into the fork by pulling the 8mm towards your chest. This piece holds the bottom of the EDC Tool and stops it from rattling. It also keeps dirt out of your fork and has a small drain hole. Note* The EDC Tap kit includes a star nut puller and self aligning tap Patents Pending All compatibility and fit determinations have been made solely by OneUp. Use of this or any other aftermarket product may void any warranty you have with the original part manufacturer. OneUp EDC Top Cap Headset Tool MPN: 1C0414PUR

by OneUp

—$206

The Headset Press Pro Install Kit is a robust, and easy to use tool. The kit includes a machined aluminum handle, 1/2" threaded rod, two machined aluminum drifts and the Adjustable Press Stop allowing for easy drift placement. One drift is machined with multiple steps to fit common head tube inner diameters listed in the Compatibility tab below. The other drift has two sizes to press in cups with either 1-1/8" or 1-1/2" bearings. Originally Press-8 Machined aluminum handle and drifts Red anodized drifts and handles Zinc-plated 1/2" diameter threaded rod Long threaded rod works with long head tubes up to 250mm Wheels Manufacturing Headset Press Pro Install Kit Headset Tool UPC: 811079027108 MPN: BP0008

by Wheels Manufacturing

—$17.95

Features the Y-head design with lazer cut openings to ensure a tight, accurate fit. Park Tool Headset Wrench Headset Tool UPC: 763477004062 MPN: HCW-6

by Park Tool

—$36.99

High quality tools ensure that headsets are properly serviced. Replacement stepped bushings for HHP-2 Ensures proper headset cup alignment Pair Park Tool Headset Tools Headset Tool UPC: 763477013101 MPN: 530-2

by Park Tool

—$27.95

Features the Y-head design with lazer cut openings to ensure a tight, accurate fit. Park Tool Headset Wrench Headset Tool UPC: 763477004079 MPN: HCW-7

by Park Tool

—$11.29

High quality tools ensure that headsets are properly serviced.CRP-1 requires 2 blades to operate Park Tool Headset Tools Headset Tool UPC: 763477506689 MPN: 1170-2

by Park Tool