—$29

The PNW Loam grips are a great option to spice up your cockpit. PNW has designed the Loam grips with comfort in mind. They have strategically shaped the grips so that there's padding where it counts for trail vibration while keeping the ends thinner for a better grip feel. The grip pattern has also been laid out so that you're getting the proper grip you need while ensuring a smooth and soft ride. You're sure to be a happy camper picking up a set of these Loam grips!   We can’t promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter. The Loam Grip features two contrasting patterns and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip’s surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design helps combat compound deterioration, ensures the grip is absorbing more vibration and provides needed structure to support the additional body weight pressing down on this crucial contact point. The pattern isn’t the only thing designed to keep your hands happy. The Loam Grip was purpose built for the demands of Enduro/Trail riding, and developing the right compound for this was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. After testing many different blends, we picked one that we call the “happy camper” composite, because it strikes a balance between an ultra soft material that wears too quickly and a harder compound that provides no tactile benefits.   Item Specifications Diameter 31mm inside - 29.5mm outside Width 133.5mm Clamp Standard 22.2 single clamp PNW Loam Grip UPC: 810035870758

by PNW

—$44.95

The evolution of the successful GE1. The new rider-oriented, ergonomic grip for wide riser bars. Thanks to the feedback collected from countless riders of the Enduro World Series, the Ergon design team succeeded in further improving the popular GE1 in certain details. Surface texture is now even more slip-proof and the rubber compound softer, lending constant precise grip. It actively supports the correct torso/forearm position during downhill riding by rotating the grip area towards the steering axle by 8 % the elbows are automatically outwardly raised. Forged inner clamp, fully integrated grip end connected to the inner core this establishes a soft, damping grip edge, and your hand can grip right at the outer edge. Pressure is diminished from the sensitive ulnar nerve, which is located on the outside hand. Compatible with carbon handlebars. Maximum hand grip is assured with use of silicone-based rubber compounds Texture orientation which is opposite the rotation of the hand Damping inner core construction Item Specifications Color Moss/Oil Slick Defined Color Green Flange No Grip Shift Specific No Length 135 Lock On Yes Shape Round Weight 105 Ergon GE1 Evo Factory Grips Grip EAN: 4260477069108

by Ergon

—$190

The M9 bar is a dedicated downhill option. Designed around a 31.8mm clamp diameter and downhill-focused flex profile, this bar's celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. Carbon fiber bar has a downhill-focused flex profile Tuned to deliver confidence and control on the toughest tracks The M9 bar features a trail-perfect 8 sweep and 4 tip for downhill machine Includes a complete decal sheet to to color match existing wheel color decals Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Carbon Rise 50 Upsweep 4 Weight 265 Width 810 ENVE Composites M9 Handlebar Flat/Riser Handlebar UPC: 818801025340

by ENVE Composites

—$32

This collaboration between Brendan "Brendog" Fairclough and DMR brings an offering that marries some classic grip features to work for the demands of anything from all mountain to downhill riding. Single Krayton rubber Flange side mushroom pattern for comfort Tapered core - no need for outer lock ring Combination of waffle and knurl patterns for increased grip Soft compound Item Specifications Color Orange Weight 120 Genre 140 Defined Color Orange Shape Round Lock On Yes Flange Yes Grip Shift Specific No Grip Diameter 31.3mm DMR DeathGrip Flanged Grips Grip EAN: 5055308113629

by DMR

—$29.95

GA2 with extra thick circumference. Specifically for riders with large hands or high demands for damping. The ergonomic optimized form, allows reduced force while gripping, because the grip zones are matched to the hand. The inner construction varies in thickness allowing greater damping. The GA2 Fat has a superb tactile feel The super soft, UV-stable rubber compound is exclusively manufactured in Germany for Ergon. This allows greater control even on demanding trails. The inboard clamp allows even more gripping area at the end of the bars, it is completely secure and carbon bar friendly. With replaceable endplug. Gravity control rubber material Extra thick gripping range Item Specifications Color Midsummer Blue Defined Color Blue Flange No Grip Shift Specific No Length 136 Lock On Yes Shape Round Weight 135 Ergon GA2 Fat Grips Grip EAN: 4260477068927

by Ergon

—$29

The PNW Loam XL grips are a great option to spice up your cockpit. PNW has designed the Loam grips with comfort in mind. They have strategically shaped the grips so that there's padding where it counts for trail vibration while keeping the ends thinner for a better grip feel. The grip pattern has also been laid out so that you're getting the proper grip you need while ensuring a smooth and soft ride. You're sure to be a happy camper picking up a set of these Loam grips!   We can’t promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all new Loam Grip XL. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter. The Loam Grip XL features two contrasting patterns and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip’s surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design helps combat compound deterioration, ensures the grip is absorbing more vibration and provides needed structure to support the additional body weight pressing down on this crucial contact point. The pattern isn’t the only thing designed to keep your hands happy. The Loam Grip XL was purpose built for the demands of Enduro/Trail riding, and developing the right compound for this was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. After testing many different blends, we picked one that we call the “happy camper” composite, because it strikes a balance between an ultra soft material that wears too quickly and a harder compound that provides no tactile benefits.   Item Specifications Diameter 34mm inside Width 133.5mm Clamp Standard 22.2 single clamp PNW Loam Grip UPC: 810035871908

by PNW

—$190

The M7 bar is our 35mm bar for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive, while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. Mid-rise bar option features 25mm of rise for a comfortable riding experience 800mm bar can be trimmed down to 780mm Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum This bar is tuned to be precise and responsive, while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits The M7 bar features a trail-perfect 8 sweep and 4 tip for your long-travel 29er, enduro race bike, or downhill machine Includes decal sheet to color match with ENVE wheel decals Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Carbon Rise 25 Upsweep 5 Weight 240 Width 800 ENVE Composites M7 Handlebar Flat/Riser Handlebar UPC: 818801025319

by ENVE Composites

—$21

Salsa Gel Cork Tape embossed with Pepper Globe and Salsa script.End plugs included Item Specifications Color Dark Brown Defined Color Brown Salsa Gel Cork Bar Tape Bar Tape UPC: 657993022139

by Salsa

—$49.99

The Race Face Aeffect handlebar is an budget-friendly alloy bar intended for XC and Trail use. The most affordable option for riders looking for a 35mm handlebar. 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance Manufactured from cold drawn, seamless aluminum Shot-peened to increase fatigue resistance Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Aluminum Rise 20 Upsweep 5 Weight 335 Width 760 RaceFace Aeffect Flat/Riser Handlebar UPC: 821973280783

by RaceFace

—$159.99

The Most Compliant E-Bike Rated Bar On the Market. E-Bikes let you ride further for longer. They’re heavier and more physically demanding to ride. That makes reducing fatigue even more important. Our Carbon E-Bar is 20% more compliant than other carbon handlebars. That means more comfort and less fatigue on longer rides.. This is our most compliant handlebar yet and it’s equipped with integrated ports for E-Bike controls. Our patented oval design delivers a more comfortable ride without giving up any steering response or strength. The patented oval profile of all our handlebars minimizes arm pump with vertical compliance and maximizes steering response with lateral stiffness. The OneUp Carbon E-Bar is 20% more compliant than our competitors’ bars. That’s because the oval bar profile narrows to just 20mm to maximize vertical compliance. For reference, the thinnest portion of a traditional handlebar is 22.2mm. Carbon E-Bar has internal routing for Shimano STEPS switch units and it passes the stringent Zedler E-MTB Advanced Plus standard and the international DH standard (ASTM Cat. 5 Downhill). COMPATIBILITY The OneUp E-Bar features internal routing for Shimano STEPS switch units and all other switch units with a connector diameter less than 6.5mm. The wire port diameter in the bar is 6.5mm and the minimum switch wire length required to internally route is 650mm. Specialized, Bosch or Rocky Mountain remote power mode controllers cannot be internally routed through the Carbon E-Bar. If you have a switch with a removable wire (EP8 or E8000) you can install a 650mm or longer Shimano EW-SD50 wire. The Orbea Rise does not have a handlebar mounted display unit as it connects to your smartphone. It has the EW-EN100 junction and removable EW-SD50 wire. If you don’t have a removable wire on your switch, you need to buy a new switch with a removable wire (SW-E7000-L) with a wire length of at least 700mm. Or you you can add the EW-JC200 2 port junction and an EW-SD50 extension wire. Grips with a single outer clamp are NOT compatible with this bar. Control Bar ends (Bull Horns) are NOT compatible with this bar. Specs: Geometry: 800mm Wide/ 35mm Dia./ Sweep 8° Back 5° Up Weight: 35mm Rise (238g) Stealth Routing: Wire ports & grooves for controller Minimum Trim width: 740mm OneUp Carbon E-Handlebar Flat/Riser Handlebar

by OneUp

—$89.95

Title MTB offers these awesome bars that will live up to all of your expectations. Designed and tested by Brett Rheeder, professional freeride mountain biker, you know these bars are meant to take a beating whether it's on your trail bike or downhill rig. Sleek minimal branding ensures that these bars look great on anything you put these on! Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill bikes Made from aerospace grade 7050 T74 aluminum Spiral butting technology (improves strength / reduces weight) Centre guidelines for easy stem alignment Cut guidelines on both ends of handlebar Smooth Chrome Finish SPECS 810mm width 35mm clamp diameter 8° Backsweep 5° Upsweep 38mm rise (327g) Title MTB AH1 Flat/Riser Handlebar UPC: 661317987905

by Title MTB

—$94.95

These handlebars borrow technology from Renthal's motocross heritage and have been designed and developed to offer a combination of weight savings, strength and durability for anything from all mountain to downhill. Shot peened and anodized for a corrosion resistant finish Laser etched positioning grid at stem clamp area High strength 7-series aluminum alloy Width marks allow riders to personalize their fit Item Specifications Color Gold Weight 305 Width 800 Bar Clamp Diameter 35.0 Material Aluminum Defined Color Gold Upsweep 5 Back Sweep (deg) 7 Rise 40 Renthal FatBar Handlebar Flat/Riser Handlebar UPC: 765442154109

by Renthal

—$184.95

An ideal handlebar for riding anything from all mountain to downhill, this carbon offering of the Fatbar combines a blend of strength, stiffness, shock absorption and weight savings. Increased center section width for fine-tuned flex characteristics Downhill and twin crown fork compatible Uni-Directional carbon construction Ride tuned to provide an ideal combination of stiffness and shock absorption Permanent graphics, set-up grid and cut marks Item Specifications Color Carbon Weight 305 Width 800 Bar Clamp Diameter 35.0 Material Carbon Defined Color Black Upsweep 5 Back Sweep (deg) 7 Rise 40 Renthal FatBar Carbon Handlebar Flat/Riser Handlebar UPC: 765442154024

by Renthal

—$29.95

GA2 with extra thick circumference. Specifically for riders with large hands or high demands for damping. The ergonomic optimized form, allows reduced force while gripping, because the grip zones are matched to the hand. The inner construction varies in thickness allowing greater damping. The GA2 Fat has a superb tactile feel The super soft, UV-stable rubber compound is exclusively manufactured in Germany for Ergon. This allows greater control even on demanding trails. The inboard clamp allows even more gripping area at the end of the bars, it is completely secure and carbon bar friendly. With replaceable endplug. Gravity control rubber material Extra thick gripping range Item Specifications Color Risky Red Defined Color Red Flange No Grip Shift Specific No Length 136 Lock On Yes Shape Round Weight 135 Ergon GA2 Fat Grips Grip EAN: 4260477068910

by Ergon

—$26

The PNW Loam XL grips are a great option to spice up your cockpit. PNW has designed the Loam grips with comfort in mind. They have strategically shaped the grips so that there's padding where it counts for trail vibration while keeping the ends thinner for a better grip feel. The grip pattern has also been laid out so that you're getting the proper grip you need while ensuring a smooth and soft ride. You're sure to be a happy camper picking up a set of these Loam grips!   We can’t promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all new Loam Grip XL. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter. The Loam Grip XL features two contrasting patterns and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip’s surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design helps combat compound deterioration, ensures the grip is absorbing more vibration and provides needed structure to support the additional body weight pressing down on this crucial contact point. The pattern isn’t the only thing designed to keep your hands happy. The Loam Grip XL was purpose built for the demands of Enduro/Trail riding, and developing the right compound for this was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. After testing many different blends, we picked one that we call the “happy camper” composite, because it strikes a balance between an ultra soft material that wears too quickly and a harder compound that provides no tactile benefits.   Item Specifications Diameter 34mm Width 133.5mm Clamp Standard 22.2 single clamp PNW Loam Grip UPC: 810035873469

by PNW

—$39.95

GE1 Evo Factory grips in factory colors. The evolution of the successful GE1. The new rider-oriented, ergonomic grip for wide riser bars. Thanks to the feedback collected from countless riders of the Enduro World Series, the Ergon design team succeeded in further improving the popular GE1 in certain details. Surface texture is now even more slip-proof and the rubber compound softer, lending constant precise grip. It actively supports the correct torso/forearm position during downhill riding by rotating the grip area towards the steering axle by 8 % the elbows are automatically outwardly raised. Forged inner clamp, fully integrated grip end connected to the inner core this establishes a soft, damping grip edge, and your hand can grip right at the outer edge. Pressure is diminished from the sensitive ulnar nerve, which is located on the outside hand. Compatible with carbon handlebars. Maximum hand grip is assured with use of silicone-based rubber compounds Texture orientation which is opposite the rotation of the hand, Damping inner core construction Item Specifications Color Frozen Orange Defined Color Orange Flange No Grip Shift Specific No Length 135 Lock On Yes Shape Round Weight 115 Ergon GE1 Evo Factory Slim Grip EAN: 4260477066558

by Ergon

—$18.99

ESI Racer's Edge Grips are 30mm in diameter. Silicone construction conforms to the hand and absorbs shock Install and remove with rubbing alcohol Item Specifications Color Black Unit of Sale Pair Weight 50g Length 130mm Flange No Defined Color Black ESI Racer's Edge Grips Grip UPC: 181517000025

by ESI

—$36

The DeathGrip Race Edition is the second collaboration between DMR and Brendog. DMR started with an internally tapered single-lock core grip and wrapped Brendan's design around it in secret super-soft 'Race Day' compound. Super Soft 'RACE DAY' Compound for a Secret Super-Tacky Formula Tapered Core, no need for outer lock ring Waffle and Knurl patterns for increased grip Mushroom design for comfort Available in Thin (29.8mm) or Thick (31.3mm) Item Specifications Color Black Defined Color Black Flange No Grip Material Rubber Length 140 Lock On Yes Shape Round Weight 120 DMR DeathGrip Race Edition Grips Grip EAN: 5055308117252

by DMR

—$190

The M5 bar is designed with an offset grip position and 31.8mm clamping surface, the bar can be mounted with a positive or negative rise of 5mm. This versatile bar combines a familiar 9degree sweep with the greater width and strength that's demanded by today's more aggressive XC riders.Includes decal sheet to color match with ENVE wheel decals Item Specifications Back Sweep (deg) 9 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Carbon Rise 5 Weight 192 Width 760 ENVE Composites M5 Handlebar Flat/Riser Handlebar UPC: 818801025272

by ENVE Composites

—$89.99

The Blacklabel 800 is the evolution of over a decade of Deity handlebar development. By widening the center bore area the strength is increased while still delivering an incredibly comfortable, stable, and responsive feel. Designed for DH / Enduro / All MTN applications Detailed two tone bead blast and polished ano finish Custom butted 7075 T73 aluminum with proprietary Gradient Butting Technology Designed for maximum ride quality with a 31.8mm bore Features measured cut marks and center alignment detail Item Specifications Back Sweep (deg) 9 Bar Clamp Diameter (mm) 31.8 Color Black/Stealth Material Aluminum Rise 38 Upsweep 5 Weight 343 Width 800 Deity Components Blacklabel 800 Handlebar Flat/Riser Handlebar UPC: 817180021042

by Deity Components

—$94.95

The Fatbar is the ultimate aluminum downhill race handlebar, designed to be the ultimate combination of lightness, strength and durability. With much lower weight, the Fatbar is also now ideally suited for trail bike use, where a super-wide handlebar is required. High strength 7-series aluminum alloy Shot peened and anodized for a corrosion resistant finish Laser etched positioning grid at stem clamp area Width marks allow riders to personalize their fit Durable hard anodized finish Item Specifications Back Sweep (deg) 7 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Aluminum Rise 40 Upsweep 5 Weight 305 Width 800 Renthal FatBar Handlebar Flat/Riser Handlebar EAN: 5026190154533

by Renthal

—$35.50

The Tinker Juarez Signature Dread Lock Grips offer the padding and control needed for longer rides. Designed for comfort at every turn, the Dread Lock Grips feature ODI's exclusive ultra soft and lightweight A.I.R.E. compound along with an offset design that provides additional padding for your hands without the feel of a bulky grip. Soft TPE ends provide extra support when railing turns and help to protect your grips from impacts while the V2.1 Single-Clamp Lock-On system ensures that your grips stay put no matter what the conditions. Offset Grip design provides more padding on the palm side of grip Contoured surface for improved comfort on longer rides Soft TPE Ends offer improved comfort and grip protection Ergonomic finger cutouts provide improved grip in all conditions Dread Lock textured surface provides improved control with less effort Item Specifications Color Black Defined Color Black Flange No Length 130 Lock On Yes Shape Round ODI Dread Lock Grips Grip UPC: 711484191459

by ODI

—$29.95

Elite Motion Grips are engineered from end to end to deliver every feature racers demand. Single clamp design Soft pro compound for shock absorption Item Specifications Color Black Defined Color Black Flange No Length 130 Lock On Yes Shape Round ODI Elite Motion Grips Grip UPC: 711484180606

by ODI

—$27

Our Farlow Gap grips take what we love from our popular Hell’s Gate Grips as well as we listened to some feedback to create a “regular” thickness grip. Utilizing a tacky A20 rubber, we thinned down the main body of the grip to a 30.5mm diameter while also removing the inner ribs and flange. Last we took the palm pads and dropped the height by 0.5mm and reduced the underside finger ribs down to 2 ribs. This creates a thinner feeling grip while retaining the features that make us love the Hell’s Gate grip. The palm pads help provide some support and comfort on rough downhills and long days while the ribs on the underside help your fingers hold grip. We also retained the single clamp design with a tapered core, so you get a clean look and a rubber grip all the way to the edge of the grip, so your hand doesn't have any hard spots. While we love our Hell’s Gate grips, we know they might not fit every hand, so we took the feedback from our amazing customers and created the Farlow Gap grip to help more riders find the feel they want. We are on a mission to make phenomenal products that support the sport of mountain biking. For every pair of The Farlow Gap Grips sold, we will donate $1 to Pisgah Area SORBA in Pisgah National Forest. We exist to support the trails we love & the people that take care of them. To See the official Trail One website Click Here! See this product on the Trail One Site Here! Don't forget to check out the Trail One philanthropy projects at trailone.bike/projects Designed in Ireland Made in Taiwan Material: Tacky A20 grade rubber on grip surface, GFRP core, 6061-T aluminum lockring w/ 3mm bolt Length: 132 mm Main body diameter: 30.5 mm Pisgah National Forest in Western North Carolina is known for endless miles of tough tech and all-day adventures. There's plenty of amazing offerings in Pisgah to keep you on your toes, but there's one trail that is guaranteed to take you to the limit: Farlow Gap. It's rocky, it's rooty, it's steep, it's awkward. And, if you can handle what gets thrown at you AND manage to keep the rubber side down, it's a whole lot of crazy fun. The Farlow Gap Grips were built for this stuff, so hold on tight! -Brian Kennedy Trail One Components Falow Gap Grip

by Trail One Components

—$32

The DeathGrip is the second collaboration between DMR and Brendog, in the orignal Flanged design. DMR started with an internally tapered single-lock core grip and wrapped Brendan's design around it in super-soft Kraton compound. Flanged grip with Soft, single Krayton rubber Tapered Core, no need for outer lock ring Waffle and Knurl patterns for increased grip Mushroom design for comfort Available in Thin (29.8mm) or Thick (31.3mm) Item Specifications Color Marble Red Defined Color Red Flange Yes Grip Material Rubber Length 140 Lock On Yes Shape Round Weight 120 DMR DeathGrip Flanged Grips Grip EAN: 5055308121877

by DMR

—$27.99

The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The Knuckleduster grips are an all day grip that allow you to keep it Pinned Wide Open at all times. Featuring Deity TRC rubber compound for exceptional durability Tapered inner sleeve to insure perfect contact with the handlebar Single clamp design with forward facing bolts that feature loc-tite Lasered black ano 6061 T6 aluminum clamps Short and wide rib design for added comfort with no side to side play Half waffle recessed design for added control without hot spots Chevron v-channel design for your palm swell to give an ergonomic feel Seamless transition through the end of grip for comfort 132mm length with 32mm outer diameter Item Specifications Color Stealth Flange No Length 132 Weight 101 Deity Components Knuckleduster Grips Grip UPC: 817180021721

by Deity Components

—$20

These foam fatties measure 33mm in diameter and feature a high-density foam construction, around an inner plastic sleeve with single-sided aluminum lock-on collar. Great for winter riding. 33mm diameter 132mm length Single-sided, open-end lock-on collar 35 grams per grip (including open-end lock-on collar) Item Specifications Color Black Defined Color Black Flange No Length 132 Lock On Yes Shape Round Salsa Fat Foam Lock-On Grips Grip UPC: 657993055458

by Salsa

—$54.99

The Race Face Chester handlebar is a budget-friendly alloy option designed for the rowdiest riding. Intended for Enduro, Downhill and Freeride applications. Shot-peened to increase fatigue resistance Cold-drawn and seamless 6061 aluminum 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance Item Specifications Color Black Width 780 Bar Clamp Diameter 35.0 Material Aluminum Defined Color Black Rise 20 RaceFace Chester Flat/Riser Handlebar UPC: 821973281285

by RaceFace

—$41.99

The Spank Spoon bars are a value oriented way to personalize your trail, all-mountain, enduro, park or downhill bike. Micro grain refinement during the extrusion process for additional strength and toughness from the metal Extreme Gradual taper technology (XGT) spreads the load out over a greater area of the bar to minimize breaks and bends Item Specifications Back Sweep (deg) 10 Bar Clamp Diameter (mm) 31.8 Color Black/Gray Defined Color Gray Material Aluminum Rise 60 Upsweep 4 Width 785 Spank Spoon Handlebar Flat/Riser Handlebar EAN: 4710155960659

by Spank

—$184.95

The Fatbar Lite Carbon is the ultimate light-weight, trail-proof handlebar. Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon is the product of an intense and in-depth research and development program. This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption. Uni-Directional carbon construction Ride tuned to provide an ideal combination of stiffness and shock absorption Increased center section width for fine-tuned flex characteristics Impact strength that surpasses the EN BMX drop standard Permanent graphics, set-up grid and cut marks Item Specifications Back Sweep (deg) 7 Bar Clamp Diameter (mm) 35.0 Color Carbon Defined Color Black Material Carbon Rise 30 Upsweep 5 Weight 180 Width 760 Renthal FatBar Lite Carbon Handlebar Flat/Riser Handlebar UPC: 765442154147

by Renthal

—$89.95

Title MTB offers these awesome bars that will live up to all of your expectations. Designed and tested by Brett Rheeder, professional freeride mountain biker, you know these bars are meant to take a beating whether it's on your trail bike or downhill rig. Sleek minimal branding ensures that these bars look great on anything you put these on! Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill bikes Made from aerospace grade 7050 T74 aluminum Spiral butting technology (improves strength / reduces weight) Centre guidelines for easy stem alignment Cut guidelines on both ends of handlebar Smooth matte black finish SPECS 800mm width 5mm clamp diameter 8° Backsweep 5° Upsweep 38mm rise (370g) Title MTB AH1 Flat/Riser Handlebar UPC: 661317987851

by Title MTB

—$89.95

Title MTB offers these awesome bars that will live up to all of your expectations. Designed and tested by Brett Rheeder, professional freeride mountain biker, you know these bars are meant to take a beating whether it's on your trail bike or downhill rig. Sleek minimal branding ensures that these bars look great on anything you put these on! Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill bikes Made from aerospace grade 7050 T74 aluminum Spiral butting technology (improves strength / reduces weight) Centre guidelines for easy stem alignment Cut guidelines on both ends of handlebar Smooth matte black finish SPECS 800mm width 31.8mm clamp diameter 8° Backsweep 5° Upsweep 50mm rise (327g) Title MTB AH1 Flat/Riser Handlebar UPC: 661317987837

by Title MTB

—$44.95

Ergon GD1 Evo Factory grips. Item Specifications Color Moss/Oil Slick Defined Color Green Flange No Grip Shift Specific No Length 144 Lock On Yes Shape Round Weight 120 Ergon GD1 Evo Factory Grips Grip EAN: 4260477069252

by Ergon

—$94.95

The Fatbar is the ultimate aluminum downhill race handlebar, designed to be the ultimate combination of lightness, strength and durability. With much lower weight, the Fatbar is also now ideally suited for trail bike use, where a super-wide handlebar is required. High strength 7-series aluminum alloy Shot peened and anodized for a corrosion resistant finish Laser etched positioning grid at stem clamp area Width marks allow riders to personalize their fit Durable hard anodized finish Item Specifications Back Sweep (deg) 7 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Aluminum Rise 30 Upsweep 5 Weight 305 Width 800 Renthal FatBar Handlebar Flat/Riser Handlebar EAN: 5026190154526

by Renthal

—$13.95

Aluminum bar end plug with 3mm hex cinch bolt to keep it in place. Designed to fit handlebars with an inner diameter of 18-20mm Outer diameter: 25mm Item Specifications Defined Color Black Problem Solvers Bar End Plugs Bar End Plug UPC: 708752121058

by Problem Solvers

—$22

SRAM Foam Grips Item Specifications Color Black Unit of Sale Pair Length 129mm Flange No Defined Color Black SRAM Foam Grips Grip UPC: 710845666926

by SRAM

—$21

Salsa Gel Cork Tape embossed with Pepper Globe and Salsa script.End plugs included Item Specifications Color Black Defined Color Black Salsa Gel Cork Bar Tape Bar Tape UPC: 657993022092

by Salsa

—$89.95

Title MTB offers these awesome bars that will live up to all of your expectations. Designed and tested by Brett Rheeder, professional freeride mountain biker, you know these bars are meant to take a beating whether it's on your trail bike or downhill rig. Sleek minimal branding ensures that these bars look great on anything you put these on! Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill bikes Made from aerospace grade 7050 T74 aluminum Spiral butting technology (improves strength / reduces weight) Centre guidelines for easy stem alignment Cut guidelines on both ends of handlebar Smooth Chrome Finish SPECS 810mm width 35mm clamp diameter 8° Backsweep 5° Upsweep 25mm rise (370g) Title MTB AH1 Flat/Riser Handlebar UPC: 661317987899

by Title MTB

—$21.49

ODI aluminum bar ends feature a triple-core design that holds plugs inside bars and are made from 6061 aluminum. Sold in pairs Fits most sized bars Item Specifications Color Black Defined Color Black Material Aluminum ODI Bar Ends Bar End Plug UPC: 711484104640

by ODI

—$18.49

SRAM SuperCork Bar Tape. Synthetic cork tape with 3M adhesive.Synthetic cork tape with 3M adhesive Item Specifications Color Black Unit of Sale Pair Material Synthetic Cork Defined Color Black SRAM SuperCork Bar Tape Bar Tape UPC: 710845600210

by SRAM

—$190

The M7 bar is our 35mm bar for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive, while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum This bar is tuned to be precise and responsive, while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits The M7 bar features a trail-perfect 8 sweep and 4 tip for your long-travel 29er, enduro race bike, or downhill machine Includes decal sheet to color match with ENVE wheel decals Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Carbon Rise 40 Upsweep 4 Weight 245 Width 800 ENVE Composites M7 Handlebar Flat/Riser Handlebar UPC: 818801025326

by ENVE Composites

—$27.99

The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The Knuckleduster grips are an all day grip that allow you to keep it Pinned Wide Open at all times. Featuring Deity TRC rubber compound for exceptional durability Tapered inner sleeve to insure perfect contact with the handlebar Single clamp design with forward facing bolts that feature loc-tite Lasered black ano 6061 T6 aluminum clamps Short and wide rib design for added comfort with no side to side play Half waffle recessed design for added control without hot spots Chevron v-channel design for your palm swell to give an ergonomic feel Seamless transition through the end of grip for comfort 132mm length with 32mm outer diameter Item Specifications Color Blue Flange No Length 132 Weight 101 Deity Components Knuckleduster Grips Grip UPC: 817180021752

by Deity Components

—$69

Just when you didn't have an excuse to buy new bars, here comes PNW. The wonderful humans over there thought a little more in-depth about the design of their handlebars by using a 10-degree back sweep to ensure the rider is in a better position allowing you to put your shoulder blades in a more neutral position and reducing wrist fatigue at the same time.   PNW has pledged 5% of all sales to NICA, the National Interscholastic Cycling Association.   Item Specifications Material 2014-T73 heat treated Alloy Rise 30 Upsweep 5 Back Sweep 10 Bar Clamp Diameter (mm) 31.8 Width 800 Color Black Weight 334g PNW Range Flat/Riser Handlebar UPC: 810035871168

by PNW

—$35.95

These grips feature the same high end technology that made the AG1 grips successful along numerous features designed to reduce impacts to the hands and improve the overall feel. Starting with an ultra soft pro compound and built into an improved knurl pattern that provides extra tackiness and control along with reduced vibration transfer. We coupled this with ODI's exclusive offset design that offers even more impact dampening where it is needed most,without increasing the grip diameter. The most impact prone portions of the grips have been redesigned to provide and even better feel and accurate control when riding. Increased diameter with offset grip design for more padding where you need it most Softer Pro Compound material for improved shock absorption Redesigned surface pattern for improved traction and vibration dampening Redesigned inner and outer grip areas for improved ergonomics Item Specifications Color Graphite/Cool Gray Defined Color Gray Flange No Length 135 Lock On Yes Shape Round ODI AG2 Grips Grip UPC: 711484192562

by ODI

—$114.99

Spike Race Vibrocore Handlebar Vibrocore is a low-density, low weight core that reduces frequency, amplitude and duration of chatter from the trail 7-Series alloy with micro-grain refinement during the drawing and extrusion process for a strong and light weight bar Dual Extreme Gradual taper technology (XGT) spreads the load out over a greater area of the bar to minimize breaks and bends Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Aluminum Rise 50 Upsweep 4 Weight 360 Width 800 Spank Spike Race Vibrocore Flat/Riser Handlebar EAN: 4717760764580

by Spank

—$27

SRAM Stationary grips available in different lengths. Item Specifications Color Black Unit of Sale Pair Flange No Defined Color Black SRAM Locking Grips Grip UPC: 710845622069

by SRAM

—$26.99

RaceFace Half Nelson grips are thin and super tacky for the lightest grip in the RaceFace lineup. Intended for XC, All Mountain and Downhill applications Single lock-on grip Super-slim low-profile design Half-waffle for added grip security Topographic moisture channels Item Specifications Color Turquoise Defined Color Blue Flange No Length 133 Lock On Yes Shape Round Weight 92.5 RaceFace Half Nelson Grip UPC: 895428009618

by RaceFace

—$190

The M6 bar is the modern trail rider's dream. It provides excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use Provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain A modern 780mm width and proven geometry ensures a great fit for all riders Includes decal sheet to color match with ENVE wheel decals Item Specifications Back Sweep (deg) 9 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Carbon Rise 7.5 Upsweep 5 Weight 190 Width 780 ENVE Composites M6 Handlebar Flat/Riser Handlebar UPC: 818801025289

by ENVE Composites

—$26.99

RaceFace Half Nelson grips are thin and super tacky for the lightest grip in the RaceFace lineup. Intended for XC, All Mountain and Downhill applications Single lock-on grip Super-slim low-profile design Half-waffle for added grip security Topographic moisture channels Item Specifications Color Red Defined Color Red Flange No Length 133 Lock On Yes Shape Round Weight 92.5 RaceFace Half Nelson Grip UPC: 821973195070

by RaceFace

—$7.49

Replacement bar end plugs for Ergon GA2/GA2 Fat/GA3 grips. One size Sold as a pair Fits Ergon 2018+ GA2, GA2 Fat and GA3 models only Fits most mtb handlebars on the market today Item Specifications Color Blue Defined Color Blue Ergon GA2/GA2 Fat/GA3 Bar End Plugs Bar End Plug EAN: 4260477067180

by Ergon