Handlebars / Grips

—$107.85

The Fatbar Lite is the ultimate lightweight, trail-proof aluminum handlebar, designed and developed to offer the ultimate combination of lightness, strength and durability. The Fatbar Lite is the ideal handlebar for a wide range of disciplines, from trail riding, right through to XC and Enduro racing. High strength 7-series aluminum alloy Shot peened and anodized for a corrosion resistant finish Laser etched positioning grid at stem clamp area Width marks allow riders to personalize their fit Durable hard anodized finish Item Specifications Back Sweep (deg) 7 Bar Clamp Diameter (mm) 35.0 Color Gold Defined Color Gold Material Aluminum Rise 40 Upsweep 5 Weight 270 Width 760 Renthal FatBar Lite Handlebar Flat/Riser Handlebar UPC: 765442163637

by Renthal

—$107.85

The Fatbar is the ultimate aluminum downhill race handlebar, designed to be the ultimate combination of lightness, strength and durability. With much lower weight, the Fatbar is also now ideally suited for trail bike use, where a super-wide handlebar is required. High strength 7-series aluminum alloy Shot peened and anodized for a corrosion resistant finish Laser etched positioning grid at stem clamp area Width marks allow riders to personalize their fit Durable hard anodized finish Item Specifications Back Sweep (deg) 7 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Aluminum Rise 30 Upsweep 5 Weight 315 Width 800 Renthal FatBar Handlebar Flat/Riser Handlebar UPC: 765442164481

by Renthal

—$107.85

The Fatbar Lite is the ultimate lightweight, trail-proof aluminum handlebar, designed and developed to offer the ultimate combination of lightness, strength and durability. The Fatbar Lite is the ideal handlebar for a wide range of disciplines, from trail riding, right through to XC and Enduro racing. High strength 7-series aluminum alloy Shot peened and anodized for a corrosion resistant finish Laser etched positioning grid at stem clamp area Width marks allow riders to personalize their fit Durable hard anodized finish Item Specifications Back Sweep (deg) 7 Bar Clamp Diameter (mm) 31.8 Color Gold Defined Color Gold Material Aluminum Rise 40 Upsweep 5 Weight 270 Width 760 Renthal FatBar Lite Handlebar Flat/Riser Handlebar UPC: 765442164603

by Renthal

—$64.99

The Guardian Handguard Kit offers ultimate hand protection from trail-side overgrowth, brush, and cactus, so you can focus on the trail ahead with confidence and comfort. Built for both performance and simplicity, the Guardian Handguard Kit ensures riders enjoy a smoother, more focused trail experience. Integrated Kit option features an intuitive mounting system that connects directly to the inner lock ring of your grips for a cockpit setup Locking collar allows for easy installation and removal, eliminating unnecessary mounts Fully adjustable Guards with 33mm side to side movement Two-position Guard mounting point to accommodate most brake levers Included Guard extender for riders with larger hands/fingers Guardian lock rings allow for infinite rotational adjustment for the clamp arm and integrate cleanly into your favorite lock-on grips 4 unique shim styles included to integrate with 90% of the market's lock-on grips Crank Brothers Guardian Handguard Kit Bar End UPC: 641300169594

by Crank Brothers

—$27.99

The Feel You Want. The Grip You Need. Chester is the softest, tackiest, most advanced grip ever from Race Face. The design process is based on gathered feedback from riders and racers to make sure this grip ticked every box, including style. 31mm diameter A perforated core design allows more 20A Durometer rubber to sit between your hands and the bar Concentrated thickness under the palm increases ride comfort and reduces fatigue Plus, the angled mushroom ribs wick moisture away for glove-free grip goodness Item Specifications Color Black/Purple Defined Color Black Defined Color Purple Flange No Length 136 Lock On Yes Shape Round Weight 112 RaceFace Chester Grip Grip UPC: 821973472492

by RaceFace

—$36.99

The Gradient is an ergonomic, lock-on grip that features a multi-directional surface for superior traction for grip control. What makes this grip truly unique is it's shape. The visible slope to the grip offers superior palm comfort and vibration damping. Single sided lock-on design with durable inner core Multi-directional grip surface for superior traction Unique ergonomic shape for grip comfort Tapered thickness for superior damping, 30mm inner - 36mm outer 1.5mm flange provides feedback on grip end Right & left specific grips Compatible with MTB, BMX, ATV, and PWC Item Specifications Color Ultra Purple Defined Color Purple Flange Yes Length 136 Lock On Yes Shape Ergonomic Weight 115 Lizard Skins Gradient Lock-On Grips Grip UPC: 696260020003

by Lizard Skins

—$34.99

The Deathgrip2 Race Edition features the grip pattern and layout that inspired a whole generation of mountain bike grips - it starts with a soft mushroom section for comfort in the thumb and forefinger area, preventing blisters in a soft-tissue zone. Next, the grip pattern features diamond knurl for grip in all conditions and all terrains - and the waffle layout underside holds your fingers in the perfect position for grip and control. A tapered core means the Deathgrip2 is firmly mounted onto your handlebars with ease and the use of just one lockring keeps things simple and tight. The krayton rubber grip compounds used are soft and comfortable, yet durable and lightweight. Deathgrip2s are designed for optimal grip, comfort and control whether you ride with or without gloves. They're the perfect choice for every rider - for weekend thrashers, dedicated freeriders, or whether you race Hardlines, World Cups, or ride Rampages. Deathgrip2s are the grip of choice for everyone. Super soft 15A durometer krayton rubber grip with injection molded DMR logo end cap Tapered core no need for outer lockring, with a secure hold using a Slimline aluminum lock-ring collar Waffle pattern for comfortable finger placement and confident grip Knurl for all over grip in all conditions Mushroom for comfort in thumb and forefinger area Two thickness options choose either 31.3mm (thick) or 29.8mm (thin) Lightweight just 100g per pair Flanged or Flangeless Designs available for your preferred grip setup Item Specifications Color Black Defined Color Black Flange Yes Grip Material Rubber Length 135 Lock On Yes Outside Diameter (mm) 29.8 Shape Round Weight 100 DMR DeathGrip 2 Race Edition Grips Grip EAN: 5055308130688

by DMR

—$32.99

The Deathgrip2 features the grip pattern and layout that inspired a whole generation of mountain bike grips - it starts with a soft mushroom section for comfort in the thumb and forefinger area, preventing blisters in a soft-tissue zone. Next, the grip pattern features diamond knurl for grip in all conditions and all terrains - and the waffle layout underside holds your fingers in the perfect position for grip and control. A tapered core means the Deathgrip2 is firmly mounted onto your handlebars with ease and the use of just one lockring keeps things simple and tight. The krayton rubber grip compounds used are soft and comfortable, yet durable and lightweight. Deathgrip2s are designed for optimal grip, comfort and control whether you ride with or without gloves. They're the perfect choice for every rider - for weekend thrashers, dedicated freeriders, or whether you race Hardlines, World Cups, or ride Rampages. Deathgrip2s are the grip of choice for everyone. Soft 20A durometer krayton rubber grip with flange and injection molded DMR logo end cap Tapered core no need for outer lockring, with a secure hold using a Slimline aluminum lock-ring collar Waffle pattern for comfortable finger placement and confident grip Knurl for all over grip in all conditions Mushroom for comfort in thumb and forefinger area Two thickness options choose either 31.3mm (thick) or 29.8mm (thin) Lightweight just 100g per pair Item Specifications Color Gum Defined Color Tan Flange Yes Grip Material Rubber Length 135 Lock On Yes Outside Diameter (mm) 29.8 Shape Round Weight 100 DMR DeathGrip 2 Flanged Grips Grip EAN: 5055308130626

by DMR

—$32.99

The Deathgrip2 features the grip pattern and layout that inspired a whole generation of mountain bike grips - it starts with a soft mushroom section for comfort in the thumb and forefinger area, preventing blisters in a soft-tissue zone. Next, the grip pattern features diamond knurl for grip in all conditions and all terrains - and the waffle layout underside holds your fingers in the perfect position for grip and control. A tapered core means the Deathgrip2 is firmly mounted onto your handlebars with ease and the use of just one lockring keeps things simple and tight. The krayton rubber grip compounds used are soft and comfortable, yet durable and lightweight. Deathgrip2s are designed for optimal grip, comfort and control whether you ride with or without gloves. They're the perfect choice for every rider - for weekend thrashers, dedicated freeriders, or whether you race Hardlines, World Cups, or ride Rampages. Deathgrip2s are the grip of choice for everyone. Soft 20A durometer krayton rubber grip with flange and injection molded DMR logo end cap Tapered core no need for outer lockring, with a secure hold using a Slimline aluminum lock-ring collar Waffle pattern for comfortable finger placement and confident grip Knurl for all over grip in all conditions Mushroom for comfort in thumb and forefinger area Two thickness options choose either 31.3mm (thick) or 29.8mm (thin) Lightweight just 100g per pair Item Specifications Color Snow Camo Defined Color White Flange Yes Grip Material Rubber Length 135 Lock On Yes Outside Diameter (mm) 29.8 Shape Round Weight 100 DMR DeathGrip 2 Flanged Grips Grip EAN: 5055308130640

by DMR

—$34.99

The Deathgrip2 Race Edition features the grip pattern and layout that inspired a whole generation of mountain bike grips - it starts with a soft mushroom section for comfort in the thumb and forefinger area, preventing blisters in a soft-tissue zone. Next, the grip pattern features diamond knurl for grip in all conditions and all terrains - and the waffle layout underside holds your fingers in the perfect position for grip and control. A tapered core means the Deathgrip2 is firmly mounted onto your handlebars with ease and the use of just one lockring keeps things simple and tight. The krayton rubber grip compounds used are soft and comfortable, yet durable and lightweight. Deathgrip2s are designed for optimal grip, comfort and control whether you ride with or without gloves. They're the perfect choice for every rider - for weekend thrashers, dedicated freeriders, or whether you race Hardlines, World Cups, or ride Rampages. Deathgrip2s are the grip of choice for everyone. Super soft 15A durometer krayton rubber grip with injection molded DMR logo end cap Tapered core no need for outer lockring, with a secure hold using a Slimline aluminum lock-ring collar Waffle pattern for comfortable finger placement and confident grip Knurl for all over grip in all conditions Mushroom for comfort in thumb and forefinger area Two thickness options choose either 31.3mm (thick) or 29.8mm (thin) Lightweight just 100g per pair Flanged or Flangeless Designs available for your preferred grip setup Item Specifications Color Black Defined Color Black Flange No Grip Material Rubber Length 135 Lock On Yes Outside Diameter (mm) 29.8 Shape Round Weight 100 DMR DeathGrip 2 Race Edition Grips Grip EAN: 5055308130664

by DMR

—$77.95

The GP3 Evo BioKork is the next iteration of Ergon's popular bar end grip, which has been improved in countless details thanks to many years of experience in hand ergonomics. The integrated 3-finger bar end angle can be customized and lets you alternate your grip to tackle static hand placement. With the new rubberized design, the GP3 Evo BioKork bar end offers even better handling and very good damping - effectively preventing numb fingers, sore hands and forearms. The GP3 Evo BioKork is manufactured from certified SGS pollutant-free rubber and cork from sustainable farming in Portugal. Adjustable integrated bar ends provide additional hand positions New, rubberized bar end design improves hand feel and damping Easy to install lock on grip Carbon bar compatible Grip rubber made in Germany. Cork farmed from Portugal Item Specifications Color Black/Cork Defined Color Black Defined Color Tan Flange No Grip Material Cork Lock On Yes Shape Ergonomic Weight 290 Ergon GP3 Evo BioKork Grips Grip EAN: 4260477077073

by Ergon

—$30.56

The Tangent Contour grips are constructed of a proprietary Soft Compound TPE material, featuring a contoured pattern and a small flange; these grips provide exceptional feedback and control. The addition of the new v2.1 Single-Clamp Lock-On system makes installation a breeze and ensures that your grips stay put no matter what the conditions. Contoured Rib Design Small Flange for just the right amount of support Single clamp - Version 2.1 Lock-On System Proprietary ODI Soft Compound Material Hand Friendly Soft Ends - Reinforced for Added Durability 30.5MM Slim Diameter Item Specifications Color Black Defined Color Black Flange No Length 135 Lock On Yes Shape Round ODI Tangent Contour Grips Grip UPC: 711484193194

by ODI

—$22.99

Ribbed Chunky grips have 8 distinct ribs to optimize shock absorption and grip! Made for 22mm bars (can fit applications down to 19mm) Installed Dia. 32mm Standard Grip Length, 130mm Bar Plugs included Item Specifications Color Orange Defined Color Orange Flange No Grip Material Silicone Length 130 Lock On No Outside Diameter (mm) 32 Shape Round Weight 60 ESI Ribbed Chunky Grips Grip UPC: 818113020736

by ESI

—$30

SRAM Jaws GripShift GripsLock on grips integrate with 2013 XX and X.0 SRAM Grip Shift shifters Item Specifications Color Black Unit of Sale Pair Weight 80g Length 100mm Flange No Defined Color Black SRAM Jaws GripShift Grip UPC: 710845699436

by SRAM

—$20.95

Designed for the XC racers. 5mm of 100% silicone compound provides excellent vibration dampening and superior comfort. 100% Silicone weather resistant material Plastic bar end plugs 5mm thick Item Specifications Color Yellow Defined Color Yellow Flange No Length 133 Lock On No Shape Round Weight 54 Wolf Tooth Razer Grips Grip UPC: 810006801019

by Wolf Tooth

—$30.95

The newest addition to the ODI line brings a welcomed facelift to the iconic Ruffian Lock-On grip. Constructed of proprietary Soft Compound TPE material and featuring an intense extra large Ruffian diamondized pattern, these grips provide exceptional comfort and control. The addition of the new v2.1 Single-Clamp Lock-On system makes installation a breeze and ensures that your grips stay put no matter what the conditions. Coming in four awesome colors to fit every riders needs. This new take on the classic Ruffian pattern puts the Ruffian XL in a category for riders who prefer comfort over feedback, but still want exceptional control. Extra Large Ruffian Diamondized Pattern Optimal Comfort and Control SINGLE CLAMP - Version 2.1 Lock-On System Proprietary ODI Soft Compound Material Hand Friendly Soft Ends - Reinforced for Added Durability 32MM Medium Diameter Item Specifications Color Blue Defined Color Blue Flange No Length 135 Lock On Yes Shape Round ODI Ruffian XL v2.1 Grips Grip UPC: 711484194931

by ODI

—$26.99

OneUp's Thin Grips are 29mm diameter. The low-profile design maximizes bike feel and control. A simple, streamlined design for riders who want a precision feel.   Item Specifications Diameter 29mm Length 138mm Weight 106g (Pair) OneUp Thin Grips Grip

by OneUp

—$26.99

OneUp's Thin Grips are 29mm diameter. The low-profile design maximizes bike feel and control. A simple, streamlined design for riders who want a precision feel.   Item Specifications Diameter 29mm Length 138mm Weight 106g (Pair) OneUp Thin Grips Grip

by OneUp

—$27.99

The Feel You Want. The Grip You Need. Chester is the softest, tackiest, most advanced grip ever from Race Face. The design process is based on gathered feedback from riders and racers to make sure this grip ticked every box, including style. 31mm diameter A perforated core design allows more 20A Durometer rubber to sit between your hands and the bar Concentrated thickness under the palm increases ride comfort and reduces fatigue Plus, the angled mushroom ribs wick moisture away for glove-free grip goodness Item Specifications Color Black/Red Defined Color Black Defined Color Red Flange No Length 136 Lock On Yes Shape Round Weight 112 RaceFace Chester Grip Grip UPC: 821973472546

by RaceFace

—$26.95

The Trace grip has a diameter of 32mm and utilizes big, soft blocks on the top surface of the grip to provide riders with maximum comfort on rough and jarring terrain. Ample space between the trapezoidal blocks provides room to squish and conform to the rider's hand. The Trace's soft compound rebounds slowly to provide additional damping and increase comfort between the rider and their handlebars. These are ideal for riders who want soft grips that absorb trail chatter and reduce hand numbness. Tapered internal sleeve to create a snug fit that eliminates twisting at the end of the grip Cushion Category - riders looking for softness, vibration damping Soft Rubber / anti-slip compound Single inboard clamp to keep the grips secure, with a soft compound, enclosed rubber end Cushioning blocks over 3/4 of the surface are tall and exible, providing absorption Light fingertip knurling with half-nelson pattern on the underside for the bar feel Item Specifications Color Black Defined Color Black Flange No Length 140 Lock On Yes Shape Round WTB Trace Grips Grip UPC: 714401750715

by WTB

—$26.99

OneUp's Thin Grips are 29mm diameter. The low-profile design maximizes bike feel and control. A simple, streamlined design for riders who want a precision feel.   Item Specifications Diameter 29mm Length 138mm Weight 106g (Pair) OneUp Thin Grips Grip

by OneUp

—$29.95

Reduced to the essentials, the Ergon GXR does exactly what cross-country riders and racers want: absorb shock, a secure grip, lightweight, and an ergonomic fit. The GXR is the first ergonomic lightweight grip made of AirCell-Rubber, which utilizes a new and unique manufacturing process. Super light, no clamp, no inner core, 100% made in Germany - the Ergon GXR defines a new chapter in MTB grips. Size Small, 32mm Diameter Utilizing a new production process, Ergon AirCell-Rubber is formed into a grip that is both ergonomic and tuned to the demands of mountain biking. The high-quality and unique AirCell-Rubber, with its countless micro air bubbles, provide very high damping, offer a soft feel and reduce grip weight Ergonomics are enhanced by offering two different sizes; this reduces discomfort and provides the necessary grip to control the bike in any situation Strategic special textures for every zone of the hand help improve support and grip Item Specifications Color Lava Yellow/Green Defined Color Yellow Flange No Length 132 Lock On No Shape Ergonomic Ergon GXR Grips Grip EAN: 4260477076717

by Ergon

—$31.99

XXL 8.25 Grips 8.25in (209.5mm) long Wet or dry your hands won't slip but the grip will never feel sticky Install and remove with rubbing alcohol Silicone has a memory and will mold to your hand Made in the USA Item Specifications Color Red Defined Color Red Flange No Grip Material Silicone Length 209 Lock On No Outside Diameter (mm) 32 Shape Round ESI XXL 8.25 Grip UPC: 818113020491

by ESI

—$29.95

Reduced to the essentials, the Ergon GXR does exactly what cross-country riders and racers want: absorb shock, a secure grip, lightweight, and an ergonomic fit. The GXR is the first ergonomic lightweight grip made of AirCell-Rubber, which utilizes a new and unique manufacturing process. Super light, no clamp, no inner core, 100% made in Germany - the Ergon GXR defines a new chapter in MTB grips. Size Large, 34mm Diameter Utilizing a new production process, Ergon AirCell-Rubber is formed into a grip that is both ergonomic and tuned to the demands of mountain biking. The high-quality and unique AirCell-Rubber, with its countless micro air bubbles, provide very high damping, offer a soft feel and reduce grip weight Ergonomics are enhanced by offering two different sizes; this reduces discomfort and provides the necessary grip to control the bike in any situation Strategic special textures for every zone of the hand help improve support and grip Item Specifications Color Midsummer Blue Defined Color Blue Flange No Length 132 Lock On No Shape Ergonomic Ergon GXR Grips Grip EAN: 4260477073938

by Ergon

—$92.99

The Turbine handlebar was fully redesigned, narrowing the stem clamp area to allow both a quicker taper and an earlier rise to hit RaceFace's meticulously researched Goldilocks (GL) tune for compliance and comfort. GL Tune hits the sweet spot preferred by most riders; stiffer was too harsh, softer was too flexible. Extremely precise aluminum engineering to optimize the flex profile of every Turbine bar variant. That meant changing the position, degree and rate of wall thickness variation( internal butting). The result is a compliant bar with very high strength 7075 series aluminum construction with GL Tune reduces arm pump and hand fatigue. Ride harder, ride faster and enjoy a consistently compliant feel in every width and every rise Max stem clamp width is 60mm (not compatible with wider stems, like Direct Mount stems) Designed for the abuse of All-Mountain and Enduro riding, even on full-power e-bikes Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 35.0 Color Stealth Defined Color Black Material Aluminum Rise 40 Upsweep 5 Weight 315 Width 780 RaceFace Turbine Handlebar Flat/Riser Handlebar UPC: 821973475523

by RaceFace

—$89.95

Title MTB offers these awesome bars that will live up to all of your expectations. Designed and tested by Brett Rheeder, professional freeride mountain biker, you know these bars are meant to take a beating whether it's on your trail bike or downhill rig. Sleek minimal branding ensures that these bars look great on anything you put these on! Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill bikes Made from aerospace grade 7050 T74 aluminum Spiral butting technology (improves strength / reduces weight) Centre guidelines for easy stem alignment Cut guidelines on both ends of handlebar Smooth matte black finish SPECS 800mm width 31.8mm clamp diameter 8° Backsweep 5° Upsweep 38mm rise (328g) Title MTB AH1 Flat/Riser Handlebar UPC: 661317989961

by Title MTB

—$89.95

Title MTB offers these awesome bars that will live up to all of your expectations. Designed and tested by Brett Rheeder, professional freeride mountain biker, you know these bars are meant to take a beating whether it's on your trail bike or downhill rig. Sleek minimal branding ensures that these bars look great on anything you put these on! Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill bikes Made from aerospace grade 7050 T74 aluminum Spiral butting technology (improves strength / reduces weight) Centre guidelines for easy stem alignment Cut guidelines on both ends of handlebar Smooth matte black finish SPECS 800mm width 31.8mm clamp diameter 8° Backsweep 5° Upsweep 38mm rise (328g) Title MTB AH1 Flat/Riser Handlebar UPC: 661317988971

by Title MTB

—$88.89

Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. Stiff, precise and wide Features the well-known geometry and specs of the Descendant downhill handlebar, with finishing design touches from Troy Lee Item Specifications Back Sweep (deg) 7 Bar Clamp Diameter (mm) 35.0 Color Starburst Cyan/Blue Defined Color Blue Material Aluminum Rise 25 Upsweep 5 Width 760 TruVativ Descendant Troy Lee Design CoLab Handlebars Flat/Riser Handlebar UPC: 710845807558

by TruVativ

—$130

Zipp Service Course SL-80 Drop Handlebars Drops angled out 4 degrees with 7 degree ramp angle Aluminum 7050 construction Rounded top bar compatible with clip-ons Item Specifications Accessory Mount Diameter 31.8 Bar Clamp Diameter (mm) 31.8 Bar Drop (mm) 125 Bar Reach (mm) 80 Bar Top Style Round Cable Routing External Clip-on Compatible Yes Color Matte Black Defined Color Black Drop Bend Style Anatomic Flare 4 Material Aluminum Weight 250 Width Measurement Center Width 36 Zipp Service Course SL-80 Handlebars Drop Handlebar UPC: 710845861321

by Zipp

—$69.99

The Spank Spoon bars are a value oriented way to personalize your trail, all-mountain, enduro, park or downhill bike. Micro grain refinement during the extrusion process for additional strength and toughness from the metal Extreme Gradual taper technology (XGT) spreads the load out over a greater area of the bar to minimize breaks and bends Item Specifications Back Sweep (deg) 8.5 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Aluminum Rise 20 Upsweep 5 Weight 357 Width 800 Spank Spoon Handlebar Flat/Riser Handlebar EAN: 4710155965838

by Spank

—$109.99

EA70 AX Drop Handlebar Maximum Contact Drop (MCD) is technology that packs comfort into the drops of these bars for increased wrist clearance while sprinting, and increased palm contact to eliminate point-loading that may cause hand fatigue Width at drops is 68mm wider than width at hoods Weight shown is for 42cm handlebar Item Specifications Accessory Mount Diameter 31.8 Bar Clamp Diameter (mm) 31.8 Bar Drop (mm) 120 Bar Reach (mm) 80 Bar Top Style Round Cable Routing External Clip-on Compatible No Color Black Defined Color Black Drop Bend Style Compact Flare 16 Material Aluminum Weight 290 Width Measurement Center Width 44 Easton EA70 AX Drop Handlebar UPC: 821973306766

by Easton

—$35

SRAM Tacky Feel Bar Tape Item Specifications Color Red Unit of Sale Set Defined Color Red SRAM Red Bar Tape Bar Tape UPC: 710845694028

by SRAM

—$65

The Feldspar is our alloy drop bar with a flattened top section and 16-degree flare. This design offers natural, comfortable hand positions anywhere on the bar. The flat tops reduce pressure on your hands, are easy to grip, and help smooth out road chatter. Upgrade to these comfortable drop bars and make every ride a little more enjoyable. 6061-T6 aluminum alloy construction Flattened top section for a comfortable grip and compliance on rough roads 16-degree flare for a blend of comfort and control 68mm reach, 100mm drop Tested to our rigorous MTN Drop Bar standard suitable for singletrack detours Item Specifications Accessory Mount Diameter 31.8 Bar Clamp Diameter (mm) 31.8 Bar Drop (mm) 100 Bar Reach (mm) 67 Bar Top Style Flat Cable Routing External Clip-on Compatible Yes Color Black Defined Color Black Drop Bend Style Compact Flare 16 Material Aluminum Weight 326 Width Measurement Center Width 42 Teravail Feldspar Drop Bar Drop Handlebar UPC: 708752529397

by Teravail

—$49.95

The GDH Team grips prove how effective ergonomics can be for a downhill grip. Shape, texture, rubber compounds - every detail of the GDH Team has been developed to enhance control and speed. The Ergon design team worked closely with two-time Downhill World Champion Vali H ll, and pro riders Troy Brosnan and Fabien Barel to create the pinnacle of downhill- specific grips. All functional zones are 100% purpose-built for the demands of DH while delivering maximum hand relief. From the moment you grip it, you'll get a locked-in feeling connecting you with your bike. The extra soft GravityControl Rubber compound is Made in Germany and SGS tested for harmful substances. Designed for Downhill, Gravity, Enduro, Trail uses Ergonomic requirements for Gravity MTB grips: maximum control, high damping, reducing gripping forces and less fatigue Multi-level, cushioning at the top, maximum finger grip zone at the bottom Intuitive orientation thanks to inner and outer stops that provide a secure, locked-in feeling Aluminum locking clamp and replaceable end plugs Compatible with aluminum and carbon handlebars Tapered Grip diameter: 29.5mm-->32mm-->29.5mm Item Specifications Color Vali H ll Edition White Defined Color White Flange Yes Grip Material Rubber Length 134 Lock On Yes Outside Diameter (mm) 32 Shape Ergonomic Ergon GDH Team Grips Grip EAN: 4260477077967

by Ergon

—$178.99

The Era handlebar was designed from the ground up, narrowing the stem clamp area to allow both a quicker taper and an earlier rise to achieve RaceFace's meticulously researched Goldilocks (GL) tune. GL tune is the sweet spot for compliance preferred by most riders; stiffer was too harsh, softer was too flexible. Nearly 100 individual pieces of hand-laid carbon fiber are bound together using a toughened epoxy resin, with a specific layup for each bar variant. The result is the highest strength-to-weight ratio UD Carbon design and construction reduces arm pump and hand fatigue. Ride harder, ride faster and enjoy a consistently compliant feel in every width and every rise Max stem clamp width is 60mm (not compatible with wider stems, like Direct Mount stems) Designed for the abuse of All-Mountain and Enduro riding, even on full-power e-bikes Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 35.0 Color Kashmoney Defined Color Gold Material Carbon Rise 55 Upsweep 5 Weight 220 Width 780 RaceFace Era Handlebar Flat/Riser Handlebar UPC: 821973504612

by RaceFace

—$53.99

Built for maximum comfort and vibration damping, the 3.5mm DSP Ultra tape is ideal for gravel, touring, or riders with sensitivity to road buzz. Its extended length accommodates wider bars, and the thicker profile ensures a plush feel without sacrificing grip. The advanced polymer and adhesive system ensure long-term reliability and easy installation. Premium 3M adhesive for secure, hassle-free installation Next-generation polymer enhances performance and responsiveness Improved formulation boosts long-term durability and tactile feel Updated texture increases surface area for better grip Package includes: 2 rolls, 2 screw-in plugs, 2 clamp covers, 2 finish strips Item Specifications Adhesive No Color Jet Black Defined Color Black Length 234cm Material DuraSoft Polymer Thickness 3.5 Weight 89 Lizard Skins DSP Ultra 3.5mm Bar Tape Bar Tape UPC: 696260023219

by Lizard Skins

—$121.99

Using the same Spiral Butted technology as the O'DUB bar, the new DMR Sweeper bar features a 12 degree back sweep perfect for eBikes and for those who prefer a more relaxed riding position. Made from lightweight heat-treated 7050 aluminum, this mountain bike handlebar is durable, stiff yet compliant and comfortable on longer rides - plus it's incredibly strong. 7050 Aluminum Light, durable, tough construction Spiral-Butted Tube Game-changing tube extrusion technology means more durability, more strength, and less weight 35mm rise with extra sweep 12 back, 5 up, for that comfort ride feel Item Specifications Back Sweep (deg) 12 Bar Clamp Diameter (mm) 35 Color Black Defined Color Black Material Alloy Rise 35 Upsweep 5 Width 800 DMR Sweeper Bar Flat/Riser Handlebar EAN: 5055308130718

by DMR

—$210.29

The Fatbar Carbon is the ultimate DH race handlebar. The product of an intense and in-depth research and development program, this ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption. The light weight of the Fatbar Carbon makes it also ideally suited for trail bike use, where a super-wide handlebar is required. Uni-Directional carbon construction Ride tuned to provide an ideal combination of stiffness and shock absorption Increased center section width for fine-tuned flex characteristics Downhill and twin crown fork compatible Permanent graphics, set-up grid and cut marks Item Specifications Back Sweep (deg) 7 Bar Clamp Diameter (mm) 31.8 Color UD Carbon Black Defined Color Carbon Material Carbon Rise 30 Upsweep 5 Weight 225 Width 800 Renthal FatBar Carbon Handlebar Flat/Riser Handlebar UPC: 765442164436

by Renthal

—$107.85

The Fatbar is the ultimate aluminum downhill race handlebar, designed to be the ultimate combination of lightness, strength and durability. With much lower weight, the Fatbar is also now ideally suited for trail bike use, where a super-wide handlebar is required. High strength 7-series aluminum alloy Shot peened and anodized for a corrosion resistant finish Laser etched positioning grid at stem clamp area Width marks allow riders to personalize their fit Durable hard anodized finish Item Specifications Back Sweep (deg) 7 Bar Clamp Diameter (mm) 31.8 Color Gold Defined Color Gold Material Aluminum Rise 30 Upsweep 5 Weight 315 Width 800 Renthal FatBar Handlebar Flat/Riser Handlebar UPC: 765442164498

by Renthal

—$107.85

The Fatbar is the ultimate aluminum downhill race handlebar, designed to be the ultimate combination of lightness, strength and durability. With much lower weight, the Fatbar is also now ideally suited for trail bike use, where a super-wide handlebar is required. High strength 7-series aluminum alloy Shot peened and anodized for a corrosion resistant finish Laser etched positioning grid at stem clamp area Width marks allow riders to personalize their fit Durable hard anodized finish Item Specifications Back Sweep (deg) 9 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Aluminum Rise 20 Upsweep 5 Width 820 Renthal FatBar Handlebar Flat/Riser Handlebar UPC: 765442164689

by Renthal

—$26.99

OneUp's Thin Grips are 29mm diameter. The low-profile design maximizes bike feel and control. A simple, streamlined design for riders who want a precision feel.   Item Specifications Diameter 29mm Length 138mm Weight 106g (Pair) OneUp Thin Grips Grip

by OneUp

—$67.45

The GP2 Evo BioKork is the next iteration of Ergon's popular bar end grip, which has been improved in countless details thanks to many years of experience in hand ergonomics. The integrated 2-finger bar end angle can be customized and lets you alternate your grip to tackle static hand placement. With the new rubberized design, the GP2 Evo bar end offers even better handling and very good damping - effectively preventing numb fingers, sore hands and forearms. The GP2 Evo is manufactured from certified SGS pollutant-free rubber and sustainable cork. Adjustable integrated bar ends provide additional hand positions New, rubberized bar end design improves hand feel and damping Easy to install lock on grip Carbon bar compatible Grip rubber made in Germany. Cork farmed from Portugal Item Specifications Color Black/Cork Defined Color Black Defined Color Tan Flange No Grip Material Cork Lock On Yes Shape Ergonomic Weight 260 Ergon GP2 Evo BioKork Grips Grip EAN: 4260477077035

by Ergon

—$29.95

Reduced to the essentials, the Ergon GXR does exactly what cross-country riders and racers want: absorb shock, a secure grip, lightweight, and an ergonomic fit. The GXR is the first ergonomic lightweight grip made of AirCell-Rubber, which utilizes a new and unique manufacturing process. Super light, no clamp, no inner core, 100% made in Germany - the Ergon GXR defines a new chapter in MTB grips. Size Small, 32mm Diameter Utilizing a new production process, Ergon AirCell-Rubber is formed into a grip that is both ergonomic and tuned to the demands of mountain biking. The high-quality and unique AirCell-Rubber, with its countless micro air bubbles, provide very high damping, offer a soft feel and reduce grip weight Ergonomics are enhanced by offering two different sizes; this reduces discomfort and provides the necessary grip to control the bike in any situation Strategic special textures for every zone of the hand help improve support and grip Item Specifications Color Risky Red Defined Color Red Flange No Length 132 Lock On No Shape Ergonomic Ergon GXR Grips Grip EAN: 4260477073907

by Ergon

—$27.99

The Feel You Want. The Grip You Need. Chester is the softest, tackiest, most advanced grip ever from Race Face. The design process is based on gathered feedback from riders and racers to make sure this grip ticked every box, including style. 34mm diameter A perforated core design allows more 20A Durometer rubber to sit between your hands and the bar Concentrated thickness under the palm increases ride comfort and reduces fatigue Plus, the angled mushroom ribs wick moisture away for glove-free grip goodness Item Specifications Color Black/Turquoise Defined Color Black Defined Color Teal Flange No Length 136 Lock On Yes Shape Round Weight 135 RaceFace Chester Grip Grip UPC: 821973472621

by RaceFace

—$36.99

The Gradient is an ergonomic, lock-on grip that features a multi-directional surface for superior traction for grip control. What makes this grip truly unique is it's shape. The visible slope to the grip offers superior palm comfort and vibration damping. Single sided lock-on design with durable inner core Multi-directional grip surface for superior traction Unique ergonomic shape for grip comfort Tapered thickness for superior damping, 30mm inner - 36mm outer 1.5mm flange provides feedback on grip end Right & left specific grips Compatible with MTB, BMX, ATV, and PWC Item Specifications Color Olive Green Defined Color Green Flange Yes Length 136 Lock On Yes Shape Ergonomic Weight 115 Lizard Skins Gradient Lock-On Grips Grip UPC: 696260020140

by Lizard Skins

—$30.56

The Vans lock on grips feature the classic Vans waffle sole pattern and are constructed from ODI's proprietary grip compound.Made in the USA by ODI Item Specifications Color Red Defined Color Red Flange Yes Length 135 Lock On Yes Shape Round ODI VANS Lock-On Grips Grip UPC: 711484195662

by ODI

—$54.95

The renowned GP1 shape in a lighter weight and more sustainably sourced BioKork construction. The BioKork grip and vegetable-oil based rubber pad make this grip hypoallergenic Small 92mm cross section, hand size 6.5-8.5 94 mm length Grip body is 40% sustainably certified grown cork from Portugal German made rubber compound is of the purest quality Carbon Bar compatible Forged aluminum clamps Item Specifications Color Black/Tan Defined Color Black Flange No Grip Shift Specific No Length 94 Lock On Yes Shape Ergo Weight 150 Ergon GP1 BioKork Grips Grip EAN: 4260477061157

by Ergon

—$30.95

The newest addition to the ODI line brings a welcomed facelift to the iconic Ruffian Lock-On grip. Constructed of proprietary Soft Compound TPE material and featuring an intense extra large Ruffian diamondized pattern, these grips provide exceptional comfort and control. The addition of the new v2.1 Single-Clamp Lock-On system makes installation a breeze and ensures that your grips stay put no matter what the conditions. Coming in four awesome colors to fit every riders needs. This new take on the classic Ruffian pattern puts the Ruffian XL in a category for riders who prefer comfort over feedback, but still want exceptional control. Extra Large Ruffian Diamondized Pattern Optimal Comfort and Control SINGLE CLAMP - Version 2.1 Lock-On System Proprietary ODI Soft Compound Material Hand Friendly Soft Ends - Reinforced for Added Durability 32MM Medium Diameter Item Specifications Color Red Defined Color Red Flange No Length 135 Lock On Yes Shape Round ODI Ruffian XL v2.1 Grips Grip UPC: 711484194917

by ODI

—$54.95

Built for swept back city handlebars in a sustainably sourced BioKork construction. The BioKork grip and vegetable-oil based rubber pad make this grip hypoallergenic Rohloff/Nexus have 94.5 and 128mm length grip Grip body is 40% sustainably certified grown cork from Portugal Forged aluminum clamp Carbon Bar compatible Item Specifications Color Black/Tan Defined Color Black Flange No Grip Shift Specific Yes Length 94 Lock On Yes Shape Ergo Weight 169 Ergon GC1 BioKork Grips Grip EAN: 4260477061317

by Ergon

—$20.95

Designed for the XC racers. 5mm of 100% silicone compound provides excellent vibration dampening and superior comfort. 100% Silicone weather resistant material Plastic bar end plugs 5mm thick Item Specifications Color Red Defined Color Red Flange No Length 133 Lock On No Shape Round Weight 54 Wolf Tooth Razer Grips Grip UPC: 810006800999

by Wolf Tooth