—$159.99

ONEUP CARBON BARS. Strong, lightweight & vertically compliant. The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let you ride harder for longer. The solution is OneUp's patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone. We bench marked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains. Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right. Specs: Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up Weight: 20mm Rise (220g) 35mm Rise (225g) Colour: Black. Decal kits: Available here in Red, Green, Blue, Orange, Purple & White OneUp Carbon Handlebar Flat/Riser Handlebar EAN: 0033562821943

by OneUp

—$159.99

ONEUP CARBON BARS. Strong, lightweight & vertically compliant. The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let you ride harder for longer. The solution is OneUp's patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone. We bench marked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains. Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right. Specs: Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up Weight: 20mm Rise (220g) 35mm Rise (225g) Colour: Black. Decal kits: Available here in Red, Green, Blue, Orange, Purple & White OneUp Carbon Handlebar Flat/Riser Handlebar EAN: 0033462821944

by OneUp

—$54.99

The Race Face Chester handlebar is a budget-friendly alloy option designed for the rowdiest riding. Intended for Enduro, Downhill and Freeride applications. Shot-peened to increase fatigue resistance Cold-drawn and seamless 6061 aluminum 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance Item Specifications Color Black Width 780 Bar Clamp Diameter 35.0 Material Aluminum Defined Color Black Rise 35 RaceFace Chester Flat/Riser Handlebar UPC: 821973281292

by RaceFace

—$84.99

The all new Highside handlebar is an homage to style and skill. The DJ/Slopestyle ready Highside 760 handlebar is the perfect reflection of what listening to the athletes can create. This design allows for a stiff, responsive feel that sets the stage to bring your style to life or life to style. DJ/ Slopestyle premier handlebar designed for progression Featuring Exclusive Gradient Butting technology Full bead blast finish for increased durability and fatigue resistance Item Specifications Back Sweep (deg) 9 Bar Clamp Diameter (mm) 31.8 Color Black Material Aluminum Rise 80 Upsweep 5 Weight 334 Width 760 Deity Components Highside Handlebar Flat/Riser Handlebar UPC: 817180021325

by Deity Components

—$190

The M6 bar is the modern trail rider's dream. It provides excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. With a 25mm rise, 9 backsweep and 5 upsweep, this bar provides excellent support and a classic fit Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use Provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain A modern 780mm width and proven geometry ensures a great fit for all riders Includes decal sheet to color match with ENVE wheel decals Item Specifications Back Sweep (deg) 9 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Carbon Rise 25 Upsweep 5 Weight 200 Width 780 ENVE Composites M6 Handlebar Flat/Riser Handlebar UPC: 818801025296

by ENVE Composites

—$45.99

The Race Face Chester handlebar is a budget-friendly alloy option designed for the rowdiest riding. Intended for Enduro, Downhill and Freeride applications. Shot-peened to increase fatigue resistance Cold-drawn and seamless 6061 aluminum Item Specifications Color Black Width 740 Bar Clamp Diameter 31.8 Material Aluminum Defined Color Black Upsweep 6 Back Sweep (deg) 9 Rise 25 RaceFace Chester Flat/Riser Handlebar UPC: 821973195872

by RaceFace

—$55

The Crockett Alloy Handlebar brings the latest and greatest handlebar geometry to an affordable price point. With an 8 degree backsweep and 5 degree upsweep your hands are at the perfect angle for attacking the trail. With both bars also coming in at 800mm length, but you can trim them down to 740mm and anywhere between. With Trail One grips, a Trail One Stem and this Crockett bar, you can complete the whole Trail One cockpit package. For every Crockett Handlebar sold, we donate $1 to Crockett Hills Regional Park. We exist to support the trails we love, the people that take care of them and to make your riding experience exceptional. To See the official Trail One website Click Here! See this product on the Trail One Site Here! Don't forget to check out the Trail One philanthropy projects at trailone.bike/projects Designed in Ireland Made in Taiwan Material: 6061-T6 aluminum Width: 800 mm Clamp (diameter of bar): Your choice of 35 mm or 31.8 mm Rise: 35 mm on 35 mm diameter or 25 mm rise on 31.8 mm diameter Sweep: 8 degrees back, 5 degrees up Weight: 35 mm diameter: 420 grams. 31.8 mm diameter: 353 grams. Tested to spec: ISO4210-5 My first mountain bike rides were straight up sufferfests in the Crockett Hills with my Uncle Dennis. I would end up walking most of the climbs and he would be waiting at the top for me, always fresh and ready for the next one. I think it's a fitting tribute that one of the first signature products from Trail One Components is named after the place where I learned to love mountain biking and those brutal climbs. These bars are a fitting first step when building out your new dream bike - or a solid upgrade for your current ride. - Brian Kennedy Trail One Components Crockett Alloy Flat/Riser Handlebar

by Trail One Components

—$89.99

The Spank Spike Race Bars is designed using premium technology to withstand the demands of all-mountain, enduro, trail, and downhill riding. MGR Super 6 Alloy offers increased strength and stiffness compared to conventional alloy bars CNC bending and extreme gradual taper (XGT) technology result in lighter, thinner wall Shot-peening and anodizing finishes enhance fatigue life even further Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 31.8 Color Matte Black Defined Color Black Material Aluminum Rise 50 Upsweep 4 Weight 330 Width 800 Spank Spike Race Bar Flat/Riser Handlebar EAN: 4717760767918

by Spank

—$184.95

An ideal handlebar for riding anything from all mountain to downhill, this carbon offering of the Fatbar combines a blend of strength, stiffness, shock absorption and weight savings. Increased center section width for fine-tuned flex characteristics Downhill and twin crown fork compatible Uni-Directional carbon construction Ride tuned to provide an ideal combination of stiffness and shock absorption Permanent graphics, set-up grid and cut marks Item Specifications Color Carbon Weight 305 Width 800 Bar Clamp Diameter 35.0 Material Carbon Defined Color Black Upsweep 5 Back Sweep (deg) 7 Rise 30 Renthal FatBar Carbon Handlebar Flat/Riser Handlebar UPC: 765442154017

by Renthal

—$41.99

The Spank Spoon bars are a value oriented way to personalize your trail, all-mountain, enduro, park or downhill bike. Micro grain refinement during the extrusion process for additional strength and toughness from the metal Extreme Gradual taper technology (XGT) spreads the load out over a greater area of the bar to minimize breaks and bends Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Aluminum Rise 25 Upsweep 5 Weight 395 Width 785 Spank Spoon Handlebar Flat/Riser Handlebar EAN: 4710155960635

by Spank

—$179.99

The Next R handlebar features 800mm of premium unidirectional carbon with shred-ready positioning. DH strength and Enduro weight for when you really need to lean into it. 35mm bar diameter for strength/weight ratio Manufactured from UD Carbon with matte clearcoat Carbon optimized flex for improved small bump compliance Item Specifications Color Black Weight 215 Width 800 Bar Clamp Diameter 35.0 Material Carbon Defined Color Black Upsweep 5 Back Sweep (deg) 8 Rise 20 RaceFace Next R Flat/Riser Handlebar UPC: 821973318103

by RaceFace

—$54.99

The Race Face Aeffect handlebar is an budget-friendly alloy bar intended for XC and Trail use. The most affordable option for riders looking for a 35mm handlebar. 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance Manufactured from cold drawn, seamless aluminum Shot-peened to increase fatigue resistance Item Specifications Back Sweep (deg) 9 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Aluminum Rise 20 Upsweep 5 Weight 345 Width 780 RaceFace Aeffect Flat/Riser Handlebar UPC: 821973309422

by RaceFace

—$89.99

Turbine R Handlebar Manufactured from cold drawn, 7075 Aluminium 35 optimized triple butted design Stealth black on black decals to match every frame color Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Aluminum Rise 35 Upsweep 5 Weight 300 Width 800 RaceFace Turbine R Flat/Riser Handlebar UPC: 821973318288

by RaceFace

—$179.99

The Race Face Next handlebar is the lightest bar in the Race Face lineup. Manufactured from unidirectional carbon, the Next is intended for XC, Trail and All Mountain use. Reinforced stem anti-crush zone 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance Item Specifications Color Stealth Weight 175 Width 760 Bar Clamp Diameter 35.0 Material Carbon Defined Color Black Upsweep 4 Back Sweep (deg) 8 Rise 20 RaceFace Next Flat/Riser Handlebar UPC: 821973268835

by RaceFace

—$190

The M9 bar is a dedicated downhill option. Designed around a 31.8mm clamp diameter and downhill-focused flex profile, this bar's celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. Carbon fiber bar has a downhill-focused flex profile Tuned to deliver confidence and control on the toughest tracks The M9 bar features a trail-perfect 8 sweep and 4 tip for downhill machine Includes a complete decal sheet to to color match existing wheel color decals Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Carbon Rise 50 Upsweep 4 Weight 265 Width 810 ENVE Composites M9 Handlebar Flat/Riser Handlebar UPC: 818801025340

by ENVE Composites

—$190

The M7 bar is our 35mm bar for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive, while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. Mid-rise bar option features 25mm of rise for a comfortable riding experience 800mm bar can be trimmed down to 780mm Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum This bar is tuned to be precise and responsive, while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits The M7 bar features a trail-perfect 8 sweep and 4 tip for your long-travel 29er, enduro race bike, or downhill machine Includes decal sheet to color match with ENVE wheel decals Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Carbon Rise 25 Upsweep 5 Weight 240 Width 800 ENVE Composites M7 Handlebar Flat/Riser Handlebar UPC: 818801025319

by ENVE Composites

—$49.99

The Race Face Aeffect handlebar is an budget-friendly alloy bar intended for XC and Trail use. The most affordable option for riders looking for a 35mm handlebar. 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance Manufactured from cold drawn, seamless aluminum Shot-peened to increase fatigue resistance Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Aluminum Rise 20 Upsweep 5 Weight 335 Width 760 RaceFace Aeffect Flat/Riser Handlebar UPC: 821973280783

by RaceFace

—$55

The Crockett Alloy Handlebar brings the latest and greatest handlebar geometry to an affordable price point. With an 8 degree backsweep and 5 degree upsweep your hands are at the perfect angle for attacking the trail. With both bars also coming in at 800mm length, but you can trim them down to 740mm and anywhere between. With Trail One grips, a Trail One Stem and this Crockett bar, you can complete the whole Trail One cockpit package. For every Crockett Handlebar sold, we donate $1 to Crockett Hills Regional Park. We exist to support the trails we love, the people that take care of them and to make your riding experience exceptional. To See the official Trail One website Click Here! See this product on the Trail One Site Here! Don't forget to check out the Trail One philanthropy projects at trailone.bike/projects Designed in Ireland Made in Taiwan Material: 6061-T6 aluminum Width: 800 mm Clamp (diameter of bar): Your choice of 35 mm or 31.8 mm Rise: 35 mm on 35 mm diameter or 25 mm rise on 31.8 mm diameter Sweep: 8 degrees back, 5 degrees up Weight: 35 mm diameter: 420 grams. 31.8 mm diameter: 353 grams. Tested to spec: ISO4210-5 My first mountain bike rides were straight up sufferfests in the Crockett Hills with my Uncle Dennis. I would end up walking most of the climbs and he would be waiting at the top for me, always fresh and ready for the next one. I think it's a fitting tribute that one of the first signature products from Trail One Components is named after the place where I learned to love mountain biking and those brutal climbs. These bars are a fitting first step when building out your new dream bike - or a solid upgrade for your current ride. - Brian Kennedy Trail One Components Crockett Alloy Flat/Riser Handlebar

by Trail One Components

—$94.95

These handlebars borrow technology from Renthal's motocross heritage and have been designed and developed to offer a combination of weight savings, strength and durability for anything from all mountain to downhill. Shot peened and anodized for a corrosion resistant finish Laser etched positioning grid at stem clamp area High strength 7-series aluminum alloy Width marks allow riders to personalize their fit Item Specifications Color Gold Weight 305 Width 800 Bar Clamp Diameter 35.0 Material Aluminum Defined Color Gold Upsweep 5 Back Sweep (deg) 7 Rise 40 Renthal FatBar Handlebar Flat/Riser Handlebar UPC: 765442154109

by Renthal

—$184.95

An ideal handlebar for riding anything from all mountain to downhill, this carbon offering of the Fatbar combines a blend of strength, stiffness, shock absorption and weight savings. Increased center section width for fine-tuned flex characteristics Downhill and twin crown fork compatible Uni-Directional carbon construction Ride tuned to provide an ideal combination of stiffness and shock absorption Permanent graphics, set-up grid and cut marks Item Specifications Color Carbon Weight 305 Width 800 Bar Clamp Diameter 35.0 Material Carbon Defined Color Black Upsweep 5 Back Sweep (deg) 7 Rise 40 Renthal FatBar Carbon Handlebar Flat/Riser Handlebar UPC: 765442154024

by Renthal

—$89.95

Title MTB offers these awesome bars that will live up to all of your expectations. Designed and tested by Brett Rheeder, professional freeride mountain biker, you know these bars are meant to take a beating whether it's on your trail bike or downhill rig. Sleek minimal branding ensures that these bars look great on anything you put these on! Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill bikes Made from aerospace grade 7050 T74 aluminum Spiral butting technology (improves strength / reduces weight) Centre guidelines for easy stem alignment Cut guidelines on both ends of handlebar Smooth Chrome Finish SPECS 810mm width 35mm clamp diameter 8° Backsweep 5° Upsweep 38mm rise (327g) Title MTB AH1 Flat/Riser Handlebar UPC: 661317987905

by Title MTB

—$89.99

The Blacklabel 800 is the evolution of over a decade of Deity handlebar development. By widening the center bore area the strength is increased while still delivering an incredibly comfortable, stable, and responsive feel. Designed for DH / Enduro / All MTN applications Detailed two tone bead blast and polished ano finish Custom butted 7075 T73 aluminum with proprietary Gradient Butting Technology Designed for maximum ride quality with a 31.8mm bore Features measured cut marks and center alignment detail Item Specifications Back Sweep (deg) 9 Bar Clamp Diameter (mm) 31.8 Color Black/Stealth Material Aluminum Rise 38 Upsweep 5 Weight 343 Width 800 Deity Components Blacklabel 800 Handlebar Flat/Riser Handlebar UPC: 817180021042

by Deity Components

—$159.99

The Most Compliant E-Bike Rated Bar On the Market. E-Bikes let you ride further for longer. They’re heavier and more physically demanding to ride. That makes reducing fatigue even more important. Our Carbon E-Bar is 20% more compliant than other carbon handlebars. That means more comfort and less fatigue on longer rides.. This is our most compliant handlebar yet and it’s equipped with integrated ports for E-Bike controls. Our patented oval design delivers a more comfortable ride without giving up any steering response or strength. The patented oval profile of all our handlebars minimizes arm pump with vertical compliance and maximizes steering response with lateral stiffness. The OneUp Carbon E-Bar is 20% more compliant than our competitors’ bars. That’s because the oval bar profile narrows to just 20mm to maximize vertical compliance. For reference, the thinnest portion of a traditional handlebar is 22.2mm. Carbon E-Bar has internal routing for Shimano STEPS switch units and it passes the stringent Zedler E-MTB Advanced Plus standard and the international DH standard (ASTM Cat. 5 Downhill). COMPATIBILITY The OneUp E-Bar features internal routing for Shimano STEPS switch units and all other switch units with a connector diameter less than 6.5mm. The wire port diameter in the bar is 6.5mm and the minimum switch wire length required to internally route is 650mm. Specialized, Bosch or Rocky Mountain remote power mode controllers cannot be internally routed through the Carbon E-Bar. If you have a switch with a removable wire (EP8 or E8000) you can install a 650mm or longer Shimano EW-SD50 wire. The Orbea Rise does not have a handlebar mounted display unit as it connects to your smartphone. It has the EW-EN100 junction and removable EW-SD50 wire. If you don’t have a removable wire on your switch, you need to buy a new switch with a removable wire (SW-E7000-L) with a wire length of at least 700mm. Or you you can add the EW-JC200 2 port junction and an EW-SD50 extension wire. Grips with a single outer clamp are NOT compatible with this bar. Control Bar ends (Bull Horns) are NOT compatible with this bar. Specs: Geometry: 800mm Wide/ 35mm Dia./ Sweep 8° Back 5° Up Weight: 35mm Rise (238g) Stealth Routing: Wire ports & grooves for controller Minimum Trim width: 740mm OneUp Carbon E-Handlebar Flat/Riser Handlebar

by OneUp

—$94.95

The Fatbar is the ultimate aluminum downhill race handlebar, designed to be the ultimate combination of lightness, strength and durability. With much lower weight, the Fatbar is also now ideally suited for trail bike use, where a super-wide handlebar is required. High strength 7-series aluminum alloy Shot peened and anodized for a corrosion resistant finish Laser etched positioning grid at stem clamp area Width marks allow riders to personalize their fit Durable hard anodized finish Item Specifications Back Sweep (deg) 7 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Aluminum Rise 40 Upsweep 5 Weight 305 Width 800 Renthal FatBar Handlebar Flat/Riser Handlebar EAN: 5026190154533

by Renthal

—$190

The M5 bar is designed with an offset grip position and 31.8mm clamping surface, the bar can be mounted with a positive or negative rise of 5mm. This versatile bar combines a familiar 9degree sweep with the greater width and strength that's demanded by today's more aggressive XC riders.Includes decal sheet to color match with ENVE wheel decals Item Specifications Back Sweep (deg) 9 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Carbon Rise 5 Weight 192 Width 760 ENVE Composites M5 Handlebar Flat/Riser Handlebar UPC: 818801025272

by ENVE Composites

—$54.99

The Race Face Chester handlebar is a budget-friendly alloy option designed for the rowdiest riding. Intended for Enduro, Downhill and Freeride applications. Shot-peened to increase fatigue resistance Cold-drawn and seamless 6061 aluminum 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance Item Specifications Color Black Width 780 Bar Clamp Diameter 35.0 Material Aluminum Defined Color Black Rise 20 RaceFace Chester Flat/Riser Handlebar UPC: 821973281285

by RaceFace

—$89.99

Atlas 35 Handlebar Manufactured from cold drawn, 7075 Aluminium 35 optimized triple butted design Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 35.0 Color Kash Money Defined Color Gold Material Aluminum Rise 35 Upsweep 5 Weight 300 Width 820 RaceFace Atlas 35 Flat/Riser Handlebar UPC: 821973340050

by RaceFace

—$41.99

The Spank Spoon bars are a value oriented way to personalize your trail, all-mountain, enduro, park or downhill bike. Micro grain refinement during the extrusion process for additional strength and toughness from the metal Extreme Gradual taper technology (XGT) spreads the load out over a greater area of the bar to minimize breaks and bends Item Specifications Back Sweep (deg) 10 Bar Clamp Diameter (mm) 31.8 Color Black/Gray Defined Color Gray Material Aluminum Rise 60 Upsweep 4 Width 785 Spank Spoon Handlebar Flat/Riser Handlebar EAN: 4710155960659

by Spank

—$184.95

The Fatbar Lite Carbon is the ultimate light-weight, trail-proof handlebar. Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon is the product of an intense and in-depth research and development program. This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption. Uni-Directional carbon construction Ride tuned to provide an ideal combination of stiffness and shock absorption Increased center section width for fine-tuned flex characteristics Impact strength that surpasses the EN BMX drop standard Permanent graphics, set-up grid and cut marks Item Specifications Back Sweep (deg) 7 Bar Clamp Diameter (mm) 35.0 Color Carbon Defined Color Black Material Carbon Rise 30 Upsweep 5 Weight 180 Width 760 Renthal FatBar Lite Carbon Handlebar Flat/Riser Handlebar UPC: 765442154147

by Renthal

—$94.95

The Fatbar is the ultimate aluminum downhill race handlebar, designed to be the ultimate combination of lightness, strength and durability. With much lower weight, the Fatbar is also now ideally suited for trail bike use, where a super-wide handlebar is required. High strength 7-series aluminum alloy Shot peened and anodized for a corrosion resistant finish Laser etched positioning grid at stem clamp area Width marks allow riders to personalize their fit Durable hard anodized finish Item Specifications Back Sweep (deg) 7 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Aluminum Rise 30 Upsweep 5 Weight 305 Width 800 Renthal FatBar Handlebar Flat/Riser Handlebar EAN: 5026190154526

by Renthal

—$89.95

Title MTB offers these awesome bars that will live up to all of your expectations. Designed and tested by Brett Rheeder, professional freeride mountain biker, you know these bars are meant to take a beating whether it's on your trail bike or downhill rig. Sleek minimal branding ensures that these bars look great on anything you put these on! Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill bikes Made from aerospace grade 7050 T74 aluminum Spiral butting technology (improves strength / reduces weight) Centre guidelines for easy stem alignment Cut guidelines on both ends of handlebar Smooth matte black finish SPECS 800mm width 31.8mm clamp diameter 8° Backsweep 5° Upsweep 50mm rise (327g) Title MTB AH1 Flat/Riser Handlebar UPC: 661317987837

by Title MTB

—$89.95

Title MTB offers these awesome bars that will live up to all of your expectations. Designed and tested by Brett Rheeder, professional freeride mountain biker, you know these bars are meant to take a beating whether it's on your trail bike or downhill rig. Sleek minimal branding ensures that these bars look great on anything you put these on! Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill bikes Made from aerospace grade 7050 T74 aluminum Spiral butting technology (improves strength / reduces weight) Centre guidelines for easy stem alignment Cut guidelines on both ends of handlebar Smooth matte black finish SPECS 800mm width 5mm clamp diameter 8° Backsweep 5° Upsweep 38mm rise (370g) Title MTB AH1 Flat/Riser Handlebar UPC: 661317987851

by Title MTB

—$190

The M7 bar is our 35mm bar for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive, while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum This bar is tuned to be precise and responsive, while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits The M7 bar features a trail-perfect 8 sweep and 4 tip for your long-travel 29er, enduro race bike, or downhill machine Includes decal sheet to color match with ENVE wheel decals Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Carbon Rise 40 Upsweep 4 Weight 245 Width 800 ENVE Composites M7 Handlebar Flat/Riser Handlebar UPC: 818801025326

by ENVE Composites

—$69

Just when you didn't have an excuse to buy new bars, here comes PNW. The wonderful humans over there thought a little more in-depth about the design of their handlebars by using a 10-degree back sweep to ensure the rider is in a better position allowing you to put your shoulder blades in a more neutral position and reducing wrist fatigue at the same time.   PNW has pledged 5% of all sales to NICA, the National Interscholastic Cycling Association.   Item Specifications Material 2014-T73 heat treated Alloy Rise 30 Upsweep 5 Back Sweep 10 Bar Clamp Diameter (mm) 31.8 Width 800 Color Black Weight 334g PNW Range Flat/Riser Handlebar UPC: 810035871168

by PNW

—$89.95

Title MTB offers these awesome bars that will live up to all of your expectations. Designed and tested by Brett Rheeder, professional freeride mountain biker, you know these bars are meant to take a beating whether it's on your trail bike or downhill rig. Sleek minimal branding ensures that these bars look great on anything you put these on! Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill bikes Made from aerospace grade 7050 T74 aluminum Spiral butting technology (improves strength / reduces weight) Centre guidelines for easy stem alignment Cut guidelines on both ends of handlebar Smooth Chrome Finish SPECS 810mm width 35mm clamp diameter 8° Backsweep 5° Upsweep 25mm rise (370g) Title MTB AH1 Flat/Riser Handlebar UPC: 661317987899

by Title MTB

—$114.99

Spike Race Vibrocore Handlebar Vibrocore is a low-density, low weight core that reduces frequency, amplitude and duration of chatter from the trail 7-Series alloy with micro-grain refinement during the drawing and extrusion process for a strong and light weight bar Dual Extreme Gradual taper technology (XGT) spreads the load out over a greater area of the bar to minimize breaks and bends Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Aluminum Rise 50 Upsweep 4 Weight 360 Width 800 Spank Spike Race Vibrocore Flat/Riser Handlebar EAN: 4717760764580

by Spank

—$190

The M6 bar is the modern trail rider's dream. It provides excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use Provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain A modern 780mm width and proven geometry ensures a great fit for all riders Includes decal sheet to color match with ENVE wheel decals Item Specifications Back Sweep (deg) 9 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Carbon Rise 7.5 Upsweep 5 Weight 190 Width 780 ENVE Composites M6 Handlebar Flat/Riser Handlebar UPC: 818801025289

by ENVE Composites

—$74

Just when you didn't have an excuse to buy new bars, here comes PNW. The wonderful humans over there thought a little more in-depth about the design of their handlebars by using a 10-degree back sweep to ensure the rider is in a better position allowing you to put your shoulder blades in a more neutral position and reducing wrist fatigue at the same time.   PNW has pledged 5% of all sales to NICA, the National Interscholastic Cycling Association.   Item Specifications Material 2014-T73 heat treated Alloy Rise 30 Upsweep 5 Back Sweep 10 Bar Clamp Diameter (mm) 35 Width 800 Color Black Weight 334g PNW Range Flat/Riser Handlebar UPC: 810035871243

by PNW

—$74

Just when you didn't have an excuse to buy new bars, here comes PNW. The wonderful humans over there thought a little more in-depth about the design of their handlebars by using a 10-degree back sweep to ensure the rider is in a better position allowing you to put your shoulder blades in a more neutral position and reducing wrist fatigue at the same time.   PNW has pledged 5% of all sales to NICA, the National Interscholastic Cycling Association.   Item Specifications Material 2014-T73 heat treated Alloy Rise 30 Upsweep 5 Back Sweep 10 Bar Clamp Diameter (mm) 35 Width 800 Color Black Weight 334g PNW Range Flat/Riser Handlebar UPC: 810035871212

by PNW

—$184.95

The Fatbar Lite Carbon is the ultimate light-weight, trail-proof handlebar. Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon is the product of an intense and in-depth research and development program. This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption. Uni-Directional carbon construction Ride tuned to provide an ideal combination of stiffness and shock absorption Increased center section width for fine-tuned flex characteristics Impact strength that surpasses the EN BMX drop standard Permanent graphics, set-up grid and cut marks Item Specifications Back Sweep (deg) 7 Bar Clamp Diameter (mm) 35.0 Color Carbon Defined Color Black Material Carbon Rise 40 Upsweep 5 Weight 180 Width 760 Renthal FatBar Lite Carbon Handlebar Flat/Riser Handlebar UPC: 765442154178

by Renthal

—$89.99

Atlas 35 Handlebar Manufactured from cold drawn, 7075 Aluminium 35 optimized triple butted design Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 35.0 Color Kash Money Defined Color Gold Material Aluminum Rise 20 Upsweep 5 Weight 300 Width 820 RaceFace Atlas 35 Flat/Riser Handlebar UPC: 821973339993

by RaceFace

—$79.99

RaceFace Atlas riser handlebar with an anodized, shot-peened finish. Cold-drawn and butted proprietaryAirAlloy aluminum tubing 4 degree upsweep Aonodized, shot-peened finish Item Specifications Color Black Weight 340g Bar Rise 32mm Bar Width 785mm Bar Clamp Diameter 31.8mm Material Aluminum Bend 8deg Defined Color Black RaceFace Atlas Handlebar Flat/Riser Handlebar UPC: 821973186603

by RaceFace

—$89.95

Title MTB offers these awesome bars that will live up to all of your expectations. Designed and tested by Brett Rheeder, professional freeride mountain biker, you know these bars are meant to take a beating whether it's on your trail bike or downhill rig. Sleek minimal branding ensures that these bars look great on anything you put these on! Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill bikes Made from aerospace grade 7050 T74 aluminum Spiral butting technology (improves strength / reduces weight) Centre guidelines for easy stem alignment Cut guidelines on both ends of handlebar Smooth matte black finish SPECS 800mm width 31.8mm clamp diameter 8° Backsweep 5° Upsweep 38mm rise (328g) Title MTB AH1 Flat/Riser Handlebar UPC: 661317987820

by Title MTB

—$89.95

Title MTB offers these awesome bars that will live up to all of your expectations. Designed and tested by Brett Rheeder, professional freeride mountain biker, you know these bars are meant to take a beating whether it's on your trail bike or downhill rig. Sleek minimal branding ensures that these bars look great on anything you put these on! Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill bikes Made from aerospace grade 7050 T74 aluminum Spiral butting technology (improves strength / reduces weight) Centre guidelines for easy stem alignment Cut guidelines on both ends of handlebar Smooth matte black finish SPECS 800mm width 5mm clamp diameter 8° Backsweep 5° Upsweep 25mm rise (370g) Title MTB AH1 Flat/Riser Handlebar UPC: 661317987844

by Title MTB

—$89.95

Title MTB offers these awesome bars that will live up to all of your expectations. Designed and tested by Brett Rheeder, professional freeride mountain biker, you know these bars are meant to take a beating whether it's on your trail bike or downhill rig. Sleek minimal branding ensures that these bars look great on anything you put these on! Rigorously tested by EFBE. Passed TRI-TEST® GR. Certified for freeride and downhill bikes Made from aerospace grade 7050 T74 aluminum Spiral butting technology (improves strength / reduces weight) Centre guidelines for easy stem alignment Cut guidelines on both ends of handlebar Smooth Chrome Finish SPECS 800mm width 31.8mm clamp diameter 8° Backsweep 5° Upsweep 50mm rise (327g) Title MTB AH1 Flat/Riser Handlebar UPC: 661317987882

by Title MTB

—$184.95

An ideal handlebar for riding anything from all mountain to downhill, this carbon offering of the Fatbar combines a blend of strength, stiffness, shock absorption and weight savings. Increased center section width for fine-tuned flex characteristics Downhill and twin crown fork compatible Uni-Directional carbon construction Ride tuned to provide an ideal combination of stiffness and shock absorption Permanent graphics, set-up grid and cut marks Item Specifications Color Carbon Weight 305 Width 800 Bar Clamp Diameter 35.0 Material Carbon Defined Color Black Upsweep 5 Back Sweep (deg) 7 Rise 20 Renthal FatBar Carbon Handlebar Flat/Riser Handlebar UPC: 765442154000

by Renthal

—$89.99

ONEUP ALLOY BARS. Strong, lightweight & vertically compliant. The award-winning vibration damping of OneUp Components Carbon Handlebar is now available in aluminum. The new Aluminum Handlebar uses our patented oval handlebar shape to deliver increased vertical compliance without sacrificing steering stiffness. This noticeably reduces hand fatigue, so you can ride harder for longer. Get carbon performance at an aluminum price. Specs: Rise:20mm and 35mm Options Clamp Diameter:35mm Width: : 800mm Upsweep:5° Backsweep:8° Weight:337g Material: 7050 - T76 Aluminum OneUp Alloy Handlebar Flat/Riser Handlebar

by OneUp

—$69.99

The Spank Spoon bars are a value oriented way to personalize your trail, all-mountain, enduro, park or downhill bike. A versatile handlebar, the Spoon 800 is rock solid in the park or on the trail Freeride inspired all mountain geometry makes the bar a great option for a variety of riding styles Shot-peening and anodizing enhances fatigue life MGR 6 Series Alloy offers increased strength and stiffness 800 length is adjustable to 740 Micro grain refinement during the extrusion process for additional strength and toughness from the metal Extreme Gradual taper technology (XGT) spreads the load out over a greater area of the bar to minimize breaks and bends Item Specifications Back Sweep (deg) 9 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Alloy Rise 40 Upsweep 5 Weight 357 Width 800 Spank Spoon Handlebar Flat/Riser Handlebar EAN: 4710155965876

by Spank

—$94.95

The Fatbar is the ultimate aluminum downhill race handlebar, designed to be the ultimate combination of lightness, strength and durability. With much lower weight, the Fatbar is also now ideally suited for trail bike use, where a super-wide handlebar is required. High strength 7-series aluminum alloy Shot peened and anodized for a corrosion resistant finish Laser etched positioning grid at stem clamp area Width marks allow riders to personalize their fit Durable hard anodized finish Item Specifications Back Sweep (deg) 7 Bar Clamp Diameter (mm) 35.0 Color Gold Defined Color Gold Material Aluminum Rise 20 Upsweep 5 Weight 305 Width 800 Renthal FatBar Handlebar Flat/Riser Handlebar UPC: 765442154031

by Renthal

—$149.99

The Race Face Next handlebar is the lightest bar in the Race Face lineup. Manufactured from unidirectional carbon, the Next is intended for XC, Trail and All Mountain use. Reinforced stem anti-crush zone 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance Item Specifications Weight 175 Width 760 Bar Clamp Diameter 35.0 Material Carbon Defined Color Black Upsweep 4 Back Sweep (deg) 8 Rise 20 RaceFace Next Flat/Riser Handlebar UPC: 895428014117

by RaceFace