Freehub Body

—$180

Industry Nine Torch SRAM XD Freehub Body The Torch series freehubs will be utilized on all 2013 and newer Torch series wheelsets as well as the 2013 Torch "Classic" series hubs Torch freehubs maintain Industry Nine's exceptional 3 degree engagement 3 degree engagement is achieved through the use of an innovative six pawl freehub, which utilizes phased engagement to double the number of engagement points from 60 to 120 Significantly lower weight - approximately 100 gram savings over the XC, Enduro, and Classic series rear hubs Lower drag - new drive ring and pawl geometry, relocated bearings, and a new seal system dramatically reduce freehub drag while coasting The freehub can be quickly and easily removed for cleaning and service and features captured pawls and coil springs that allow tool-free pawl service Kits include freehub, bearings, inner spacer, pawls, and springs Item Specifications Works with SRAM XD Cassettes Industry Nine Freehub Freehub Body UPC: 810098984843

by Industry Nine

—$109.10

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.End Cap Included Item Specifications Cassette Body Type SRAM XD Material Aluminum Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 DT Swiss Ratchet Freehub Body Freehub Body EAN: 7630024345066

by DT Swiss

—$109.10

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. Includes end cap for 12 x 142 and 12 x 148mm hubs Fits Shimano 12-speed Micro Spline cassettes Crafted from lightweight aluminum Compatible with 12mm thru-axles Item Specifications Cassette Body Type Shimano Micro Spline Material Aluminum Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 Rear Hub Spacing (mm) 148 DT Swiss Ratchet Freehub Body Freehub Body EAN: 7613052282879

by DT Swiss

—$126.80

DT Swiss XD freehub and endcap kitDT Swiss Rear Axle Conversion Kits Also used for 12 x 157mm, 12 x 177mm and 12 x 197mm spacing DT 12 x 142mm and 12 x 148mm rear hubs use the same end caps End caps do not convert non-Boost hubs to Boost 148mm spacing. DT 142x12mm and 148x12mm hubs simply share the same end caps Item Specifications Rear Axle Type 12mm Thru-axle DT Swiss XD Drivers If you are changing from a Shimano Freehub body, you will need new end caps; see below Item Specifications Material Alloy Cassette Body Type SRAM XD 11/12 Speed DT Swiss XD Freehub Body

by DT Swiss

—$79.10

Replacement freehub bodies for hubs and wheels that utilize the DT Swiss 3-Pawl system.End Cap Sold Separately Item Specifications Cassette Body Type SRAM XD Material Aluminum Material Steel DT Swiss 3-Pawl Freehub Body Freehub Body EAN: 7630024365989

by DT Swiss

—$124.68

Replacement freehub bodies for hubs and wheels that utilize the DT Swiss 3-Pawl system.End Cap Included Item Specifications Cassette Body Type Shimano Micro Spline keyword search flash Material Steel Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 Rear Hub Spacing (mm) 148 DT Swiss 3-Pawl Freehub Body Freehub Body EAN: 7613052291802

by DT Swiss

—$89.22

DT Swiss Shimano 11 Speed Freehub Bodies Item Specifications Fits DT Swiss 180 / 190 / 240 / 350 Converts to Shimano/ Sram 11 DT Swiss Ratchet Freehub Body Freehub Body EAN: 7630013967262

by DT Swiss

—$109.10

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. Fits SRAM XDR 12-speed cassette types Crafted from lightweight aluminum Compatible with 12mm thru-axles Includes end cap for 12 x 142 hubs Weight: 46 g Item Specifications Cassette Body Type SRAM XD Cassette Body Type SRAM XDR Material Aluminum Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 DT Swiss Ratchet Freehub Body Freehub Body UPC: 7613052230863

by DT Swiss

—$205

Industry Nine Freehub bodies are machined in North Carolina and contain all necessary pawls, springs and bearings for servicing or converting their hubs. Convert or replace your existing Hydra mountain freehub body with this complete XD kit. Includes everything you need to swap the freehub and get riding Kits include freehub, bearings, inner spacer, pawls, and springs Item Specifications Cassette Body Type SRAM XD Industry Nine Freehub Freehub Body UPC: 810098984362

by Industry Nine

—$71.10

Original equipment freehub bodies to fit SRAM hubs and wheels. SRAM Freehub Bodies Freehub Body UPC: 710845763861

by SRAM

—$109.10

Replacement freehub bodies for hubs and wheels that utilize the DT Swiss 3-Pawl system.End Cap Included Item Specifications Cassette Body Type SRAM XD Material Aluminum Material Steel Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 DT Swiss 3-Pawl Freehub Body Freehub Body EAN: 7630024367044

by DT Swiss

—$205

Industry Nine Freehub bodies are machined in North Carolina and contain all necessary pawls, springs and bearings for servicing or converting their hubs. Micro Spline kit also includes MS Drive-Side Endcap and freehub body seal Convert or replace your existing Hydra mountain freehub body with this complete MicroSpline kit. Includes everything you need to swap the freehub and get riding Kits include freehub, bearings, inner spacer, pawls, and springs Item Specifications Cassette Body Type Shimano Micro Spline Industry Nine Freehub Freehub Body UPC: 810098984409

by Industry Nine

—$180

Industry Nine Freehub bodies are machined in North Carolina and contain all necessary pawls, springs and bearings for servicing or converting their hubs. Not compatible with Torch Road or Torch Classic Road hubs Kits include freehub, bearings, inner spacer, pawls, and springs Item Specifications Cassette Body Type Shimano HG Material Aluminum Industry Nine Freehub Freehub Body UPC: 810098984836

by Industry Nine

—$75

Replacement freehub bodies for hubs and wheels that utilize the DT Swiss 3-Pawl system.End Cap Sold Separately Item Specifications Cassette Body Type Shimano HG keyword search flash Material Steel DT Swiss 3-Pawl Freehub Body Freehub Body EAN: 7613052039329

by DT Swiss

—$89.22

Replacement freehub bodies for hubs and wheels that utilize the DT Swiss 3-Pawl system.End Cap Included Item Specifications Cassette Body Type Shimano HG 11/12-Speed Road Material Aluminum Material Steel Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 DT Swiss 3-Pawl Freehub Body Freehub Body EAN: 7630024381989

by DT Swiss

—$61.30

Replacement freehub bodies for hubs and wheels that utilize the DT Swiss 3-Pawl system.End Cap Sold Separately Item Specifications Cassette Body Type Shimano HG keyword search flash Material Aluminum Material Steel DT Swiss 3-Pawl Freehub Body Freehub Body EAN: 7630024330703

by DT Swiss

—$89.22

Replacement freehub bodies for hubs and wheels that utilize the DT Swiss 3-Pawl system.End Cap Included Item Specifications Cassette Body Type Shimano HG keyword search flash Material Aluminum Material Steel Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 DT Swiss 3-Pawl Freehub Body Freehub Body EAN: 7630024381965

by DT Swiss

—$87.21

Original equipment freehub bodies to fit SRAM hubs and wheels. Item Specifications Cassette Body Type SRAM XD Material Aluminum SRAM Freehub Bodies Freehub Body UPC: 710845742477

by SRAM

—$120

Zipp Freehub Bodies Item Specifications Cassette Body Type Shimano HG 11/12-Speed Road Zipp Freehub Bodies Freehub Body UPC: 710845839900

by Zipp

—$178.66

The Ratchet LN freehub body upgrade kit makes it possible to convert DT Swiss 3-Pawl hubs to the beloved Ratchet System. With just a few simple steps, it is possible to incorporate the benefits of Ratchet Systems, such as the outstanding reliability and adaptability of the engagement angle.Ratchet LN freehub bodies have a freehub system seal designed into it, allowing the conversion of 3-Pawl driven hubs to the Ratchet LN. It's an ideal upgrade for hubs such as the 360 and 370 series. Item Specifications Cassette Body Type SRAM XD Material Aluminum DT Swiss Ratchet LN Freehub Body Upgrade Kit Freehub Body EAN: 7613052299112

by DT Swiss

—$89.22

Ratchet LN freehub bodies support the entry level Ratchet System of DT Swiss, primarily used in the lower price products like the 370 hubs. The Ratchet LN freehub body is designed to replace the 3-Pawl freehub system. End Cap Included Ratchet LN uses the same inner parts as the freehub Ratchet System, where the difference lies in the freehub system seal, located on the freehub body Item Specifications Cassette Body Type Shimano HG Material Aluminum Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 Rear Hub Spacing (mm) 148 DT Swiss Ratchet LN Freehub Body Freehub Body EAN: 7613052321646

by DT Swiss

—$120

Zipp Freehub Bodies Item Specifications Cassette Body Type SRAM XDR Zipp Freehub Bodies Freehub Body UPC: 710845839948

by Zipp

—$95

Trace Freehub BodyDesigned specifically for Trace hubs with straight-pull spokes RaceFace Trace Freehub Body UPC: 821973309972

by RaceFace

—$70

Freehub Driver Assemblies for replacement or repair of Onyx hubs. Compatible with Vesper and MFU equipped Classic model hubs Sealed cartridge bearings ONYX Racing Products Freehub Assembly Freehub Body

by ONYX Racing Products

—$89.22

Ratchet EXP freehub bodies have a matte finish. These are available in two different versions, with ceramic bearings for the 180 hub and with steel bearings for the 240. Ratchet EXP freehub bodies have no seal themselves, as this sits on the hub shell. Steel Bearings, Compatible with 240 series hubs End Cap Included Item Specifications Cassette Body Type Shimano HG 11/12-Speed Road Material Aluminum Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 DT Swiss Ratchet EXP Freehub Body Freehub Body EAN: 7613052361130

by DT Swiss

—$109.10

Ratchet EXP freehub bodies have a matte finish. These are available in two different versions, with ceramic bearings for the 180 hub and with steel bearings for the 240. Ratchet EXP freehub bodies have no seal themselves, as this sits on the hub shell. Steel Bearings, Compatible with 240 series hubs End Cap Included Item Specifications Cassette Body Type SRAM XD Material Aluminum Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 Rear Hub Spacing (mm) 148 DT Swiss Ratchet EXP Freehub Body Freehub Body EAN: 7613052361352

by DT Swiss

—$70

Freehub Driver Assemblies for replacement or repair of Onyx hubs. Compatible with Vesper and MFU equipped Classic model hubs Sealed cartridge bearings ONYX Racing Products Freehub Assembly Freehub Body

by ONYX Racing Products

—$75

DT Swiss 11 Speed Road Freehub Bodies Not compatible with Centerlock or 6-bolt Straight-Pull mountain hubs Item Specifications Material Steel Cassette Body Type Shimano Dynasys 11 Speed Road Cassette Body Type Shimano/SRAM 8, 9, 10 Speed DT Swiss Ratchet Freehub Body Freehub Body EAN: 7613052269375

by DT Swiss

—$109.10

Replacement freehub bodies for hubs and wheels that utilize the DT Swiss 3-Pawl system.End Cap Included Item Specifications Cassette Body Type SRAM XD Cassette Body Type SRAM XDR Material Aluminum Material Steel Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 DT Swiss 3-Pawl Freehub Body Freehub Body EAN: 7613052230870

by DT Swiss

—$72

Original equipment freehub bodies to fit SRAM hubs and wheels.1.8 mm spacer is included for use with XD cassettes Item Specifications Cassette Body Type SRAM XD Cassette Body Type SRAM XDR SRAM Freehub Bodies Freehub Body UPC: 710845784910

by SRAM

—$100

E-sync hubs are built to last, including under the higher torque and weight of eBikes. A 6066 alloy shell, heat-treated steel ratchet ring, reinforced pawls, and full Enduro bearings rovide brute strength, while 8.18 engagement provides the speed. Fits E-sync hubs and includes pawls, springs, pawl retainer, 0.5mm freehub spacer, 1.8mm cassette spacer, and freehub seal. Bearings are pre-installed Also compatible with Neo and Neo Ultimate hubs as a more durable upgrade Item Specifications Cassette Body Type SRAM XDR Material Alloy Stan's No Tubes E-Sync Freehub Body Freehub Body UPC: 847746064558

by Stan's No Tubes

—$95

Trace Freehub Body RaceFace Trace Freehub Body UPC: 821973309965

by RaceFace

—$205.54

Ratchet EXP freehub bodies have a matte finish. These are available in two different versions, with ceramic bearings for the 180 hub and with steel bearings for the 240. Ratchet EXP freehub bodies have no seal themselves, as this sits on the hub shell. Ceramic Bearings, Compatible with 180 series hubs End Cap Included Item Specifications Cassette Body Type SRAM XD Material Aluminum Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 Rear Hub Spacing (mm) 148 DT Swiss Ratchet EXP Freehub Body Freehub Body EAN: 7613052361338

by DT Swiss

—$124.68

The Ratchet LN freehub body upgrade kit makes it possible to convert DT Swiss 3-Pawl hubs to the beloved Ratchet System. With just a few simple steps, it is possible to incorporate the benefits of Ratchet Systems, such as the outstanding reliability and adaptability of the engagement angle.Ratchet LN freehub bodies have a freehub system seal designed into it, allowing the conversion of 3-Pawl driven hubs to the Ratchet LN. It's an ideal upgrade for hubs such as the 360 and 370 series. Item Specifications Cassette Body Type SRAM XD Cassette Body Type SRAM XDR Material Aluminum DT Swiss Ratchet LN Freehub Body Upgrade Kit Freehub Body EAN: 7613052299068

by DT Swiss

—$95

Vault Freehub Body RaceFace Vault Freehub Body UPC: 821973308098

by RaceFace

—$170

Industry Nine Freehub bodies are machined in North Carolina and contain all necessary pawls, springs and bearings for servicing or converting their hubs. Convert or replace your existing Torch freehub body with this complete XD-R 11/12 spd freehub kit with bearings. Includes everything you need to swap the freehub and get riding Kits include freehub, bearings, inner spacer, pawls, and springs Industry Nine Freehub Freehub Body UPC: 810098985062

by Industry Nine

—$178.66

The Ratchet LN freehub body upgrade kit makes it possible to convert DT Swiss 3-Pawl hubs to the beloved Ratchet System. With just a few simple steps, it is possible to incorporate the benefits of Ratchet Systems, such as the outstanding reliability and adaptability of the engagement angle.Ratchet LN freehub bodies have a freehub system seal designed into it, allowing the conversion of 3-Pawl driven hubs to the Ratchet LN. It's an ideal upgrade for hubs such as the 360 and 370 series. Item Specifications Cassette Body Type Shimano Micro Spline Material Aluminum DT Swiss Ratchet LN Freehub Body Upgrade Kit Freehub Body EAN: 7613052299075

by DT Swiss

—$71.95

Freehub bodies for WTB wheels. WTB Freehub Body Freehub Body UPC: 714401351271

by WTB

—$129.99

Replacement Freehub bodies for service and repair of Spank Oozy hubs.Also fits Spike hubs Spank Oozy Freehub Body Freehub Body EAN: 4717760766409

by Spank

—$205.54

Ratchet EXP freehub bodies have a matte finish. These are available in two different versions, with ceramic bearings for the 180 hub and with steel bearings for the 240. Ratchet EXP freehub bodies have no seal themselves, as this sits on the hub shell. Ceramic Bearings, Compatible with 180 series hubs End Cap Included Item Specifications Cassette Body Type SRAM XD Cassette Body Type SRAM XDR Material Aluminum Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 DT Swiss Ratchet EXP Freehub Body Freehub Body EAN: 7613052361086

by DT Swiss

—$89.22

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.End Cap Included Item Specifications Cassette Body Type Shimano HG Material Alloy Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 DT Swiss Ratchet Freehub Body Freehub Body EAN: 7630024357601

by DT Swiss

—$70

Freehub Driver Assemblies for replacement or repair of Onyx hubs. Compatible with Vesper and MFU equipped Classic model hubs Sealed cartridge bearings ONYX Racing Products Freehub Assembly Freehub Body

by ONYX Racing Products

—$100

E-sync hubs are built to last, including under the higher torque and weight of eBikes. A 6066 alloy shell, heat-treated steel ratchet ring, reinforced pawls, and full Enduro bearings rovide brute strength, while 8.18 engagement provides the speed. Fits E-sync hubs and includes pawls, springs, pawl retainer, 0.5mm freehub spacer, 1.8mm cassette spacer, and freehub seal. Bearings are pre-installed Also compatible with Neo and Neo Ultimate hubs as a more durable upgrade Item Specifications Cassette Body Type Shimano HG 11/12-Speed Road Material Alloy Stan's No Tubes E-Sync Freehub Body Freehub Body UPC: 847746064572

by Stan's No Tubes

—$109.10

Ratchet EXP freehub bodies have a matte finish. These are available in two different versions, with ceramic bearings for the 180 hub and with steel bearings for the 240. Ratchet EXP freehub bodies have no seal themselves, as this sits on the hub shell. Steel Bearings, Compatible with 240 series hubs End Cap Included Item Specifications Cassette Body Type Shimano Micro Spline Material Aluminum Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 Rear Hub Spacing (mm) 148 DT Swiss Ratchet EXP Freehub Body Freehub Body EAN: 7613052361383

by DT Swiss

—$109.10

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.End Cap Included Item Specifications Cassette Body Type SRAM XD Cassette Body Type SRAM XDR Material Aluminum Rear Axle Type Standard QR Rear Hub Spacing (mm) 130-135 DT Swiss Ratchet Freehub Body Freehub Body EAN: 7613052292793

by DT Swiss

—$104.99

X5 Freehub Body Item Specifications Cassette Body Type SRAM XD keyword search easton x5 Material Aluminum Easton X5 Freehub Body UPC: 821973288727

by Easton

—$205.54

Ratchet EXP freehub bodies have a matte finish. These are available in two different versions, with ceramic bearings for the 180 hub and with steel bearings for the 240. Ratchet EXP freehub bodies have no seal themselves, as this sits on the hub shell. Ceramic Bearings, Compatible with 180 series hubs End Cap Included Item Specifications Cassette Body Type Shimano Micro Spline Material Aluminum Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 Rear Hub Spacing (mm) 148 DT Swiss Ratchet EXP Freehub Body Freehub Body EAN: 7613052362014

by DT Swiss

—$70

Freehub Driver Assemblies for replacement or repair of Onyx hubs. Compatible with Vesper and MFU equipped Classic model hubs Sealed cartridge bearings ONYX Racing Products Freehub Assembly Freehub Body

by ONYX Racing Products

—$104.99

Replacement freehub bodies for Sun Ringle wheels that accommodate a variety of cassette types.12 x 142mm & 10 x 135mm end caps included Sun Ringle Freehub Bodies Freehub Body UPC: 844171059760

by Sun Ringle

—$95

Vault Freehub Body Item Specifications Cassette Body Type Shimano Micro Spline RaceFace Vault Freehub Body UPC: 821973381749

by RaceFace