Forks / Parts

—$55

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 100 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm 100 mm tube intended to convert RXF36 forks for dirt jumping Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640421

by Ohlins

—$55

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 200mm air tube and 2 sealing o-rings ONLY for use in the Ohlins DH38 fork Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640445

by Ohlins

—$42

Air spring seal kits for Fox suspension repair and rebuild. FOX Air Spring Seal Kit Air Springs & Parts UPC: 821973509686

by FOX

—$215

The Ohlins coil spring kit for RXF38 suspension fork allows the rider to swap from the standard air spring to a coil spring setup. Due to the unique Ohlins air cartridge design, the fork can be exchanged between coil and air indefinitely. Experience the lower friction, initial suppleness, and lack of maintenance a coil spring offers. Two important notes: The actual spring IS NOT INCLUDED (Sold Separately). Requires Ohlins coil tool for installation (Sold Separately). Intended for DH38 fork series Kit includes the top cap with adjustable preload and the bottom coil shaft (Spring Sold Separately) Adjustable travel from 130 mm up to 180 mm Arrives from the factory set up in 170mm Allows riders to indefinitely swap between air and coil spring options Requires Ohlins coil tool for installation (Sold Separately) Ohlins RXF38 Coil Spring Kit Air Springs & Parts UPC: 840153642791

by Ohlins

—$235

Easily change your Ohlins RXF38 m.3 suspension fork travel by simply unthreading the footnut on the bottom, and using a cassette lockring tool, unthread the top cap which will pull the entire cartridge out of the fork. Replace with another cartridge, and the change is complete. Includes an entire air spring cartridge set to 140mm of travel Allows for easy and quick travel change Maximum stroke on RXF36 m.3 is 160mm for 29" wheel, and 170mm for 27.5" wheel version Ohlins RXF36 m.3 Suspension Fork Air Spring Cartridge Air Springs & Parts UPC: 840153640070

by Ohlins

—$235

Easily change your Ohlins RXF38 m.3 suspension fork travel by simply unthreading the footnut on the bottom, and using a cassette lockring tool, unthread the top cap which will pull the entire cartridge out of the fork. Replace with another cartridge, and the change is complete. Includes an entire air spring cartridge set to 140mm of travel Allows for easy and quick travel change Maximum stroke on RXF36 m.3 is 160mm for 29" wheel, and 170mm for 27.5" wheel version Ohlins RXF36 m.3 Suspension Fork Air Spring Cartridge Air Springs & Parts UPC: 840153640056

by Ohlins

—$63

FOX suspension fork damper top cap assembies for service and repair. FOX Damper Top Caps Top Cap

by FOX

—$184

FOX 36 SL suspension fork damper shaft assemblies for service and repair. FOX 36 SL Damper Shaft Assembly Rebound Damper Parts UPC: 821973507774

by FOX

—$105

FOX suspension fork damper top cap assembies for service and repair. FOX Damper Top Caps Top Cap UPC: 821973495927

by FOX

—$310

FOX 34 SL suspension fork complete damper assemblies for service and repair. FOX 34 SL Damper Assembly Damper, Compression UPC: 821973509662

by FOX

—$53

FOX 34 SL suspension fork damper shaft assemblies for service and repair. FOX 34 SL Damper Shaft Assembly Rebound Damper Parts UPC: 821973507651

by FOX

—$236

FOX 34 SL suspension fork complete damper assemblies for service and repair. FOX 34 SL Damper Assembly Damper, Compression UPC: 821973509891

by FOX

—$295

FOX 34 SL suspension fork complete damper assemblies for service and repair. FOX 34 SL Damper Assembly Damper, Compression UPC: 821973509907

by FOX

—$210

FOX 36 SL suspension fork complete damper assemblies for service and repair. FOX 36 SL Damper Assembly Damper, Compression UPC: 821973507866

by FOX

—$84

FOX 34 SL suspension fork damper shaft assemblies for service and repair. FOX 34 SL Damper Shaft Assembly Rebound Damper Parts UPC: 821973507545

by FOX

—$221

FOX 34 SL suspension fork complete damper assemblies for service and repair. FOX 34 SL Damper Assembly Damper, Compression UPC: 821973507576

by FOX

—$470

hlins offers four different crown sets for DH38 suspension fork that differ in offset, allowing riders to further customize their ride. Offset is the distance between the wheel axle and the steerer tube and affects how the bike steers by changing the "trail" dimension. There are three different offsets: 46mm, 50mm, 54mm, and 58mm. Typically, shorter offsets are more stable but require more steering input to change direction. The opposite is true, too; the longer the offset, the easier it is to steer, but it will be less stable at speed. Most DH bikes with 29" wheels use 58mm and 54mm offset, while DH bikes with 27.5" front wheels use 46mm. Provides 46mm offset to DH38 suspension forks Includes one lower crown with a straight 1.125" steerer tube pressed in Includes two upper crowns; one flat, one drop crown Comes with two rubber fork bumpers M6 x 16 clamp bolts Black Anodized Finish Ohlins DH38 Suspension Fork Crownset Crown/Steerer/Uppertube Assembly UPC: 840153633485

by Ohlins

—$470

hlins offers four different crown sets for DH38 suspension fork that differ in offset, allowing riders to further customize their ride. Offset is the distance between the wheel axle and the steerer tube and affects how the bike steers by changing the "trail" dimension. There are three different offsets: 46mm, 50mm, 54mm, and 58mm. Typically, shorter offsets are more stable but require more steering input to change direction. The opposite is true, too; the longer the offset, the easier it is to steer, but it will be less stable at speed. Most DH bikes with 29" wheels use 58mm and 54mm offset, while DH bikes with 27.5" front wheels use 46mm. Provides 58mm offset to DH38 suspension forks Includes one lower crown with a straight 1.125" steerer tube pressed in Includes two upper crowns; one flat, one drop crown Comes with two rubber fork bumpers M6 x 16 clamp bolts Black Anodized Finish Ohlins DH38 Suspension Fork Crownset Crown/Steerer/Uppertube Assembly UPC: 840153633515

by Ohlins

—$1,550

Unleash the next level of racing performance with the latest innovation in Ohlins front suspension - the RXC34 m.1 carbon unicrown fork. Equipped with their race proven floating axle design, the RXC34 m.1 features a chassis with a stiff, yet lightweight aluminum with carbon unicrown construction for precise steering and predictable performance. This is their lightest racing version of the carbon unicrown fork, limited to 100 mm of travel, saving an additional 20 g of weight. Like the aluminum version, the carbon unicrown RXC34 m.1 features an all-new damper and updated air spring, further enhancing speed and control on technical cross-country tracks. As part of the hlins XC suspension system, the RXC34 m.1 features a rider-friendly system for adjusting air spring progressiveness and stroke. And with their race-proven setting bank, you'll be able to fine-tune the fork to your unique riding style and bike linkage. This RXC34 m.1 manual version offers 3 ride modes, rebound, and 10 clicks of low-speed compression in the open mode Uses the new XC-optimized OTX14 damper that's been extensively designed to provide a slim, lightweight damper packed with technology Highly adjustable with race-proven setting bank to match riding style and bike Two-chamber air spring feature a large negative air chamber balanced with the damper s characteristics in the three different ride modes open, pedal, and lockout Up to 5 positive volume spacers to adjust progressiveness (depending on travel) Up to 7 negative spacers to adjust initial sensitivity Creates the initial movement required for superior traction while retaining best-in-class, predictable support when pushing hard 15mm x 110mm boost floating thru-axle axle design to minimize friction Item Specifications Axle to Crown Length 531 Brake Type Post Mount 180 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Type Tapered Travel (mm) 120 Weight 1476 Wheel Size 29" Ohlins RXC34 m.1 Suspension Fork with Carbon Unicrown Suspension Fork UPC: 840153633614

by Ohlins

—$1,800

New DH38 m.2 coil sprung suspension fork with features reworked internals and updated settings, built around the race-proven TTX18 cartridge. This powerful fork is the ultimate downhill weapon, delivering hard-hitting performance through its dual-crown design. The new DH38 m.2 fork is the most advanced downhill fork Ohlins has ever created, offering improvements in comfort, sensitivity, and bottom-out control. Bottom-out progressiveness has been increased with the addition of a spring booster, and the system is further optimized for use with volume spacers, giving riders greater flexibility to fine-tune their ride feel. With these upgrades, the new DH38 m.2 is the ultimate fork for gravity riders charging down the steepest lines and attacking the most demanding courses-engineered to push harder, land bigger, and inspire full confidence. Four separately sold DH Crowns, you can choose from 46-, 50-, 54-, or 58-mm offset options to match your setup and preferred riding style Independent cartridge spring and damper systems Coil-sprung for maximum suppleness and reliability Cartridge-based spring system allows for quick swaps between Coil and Air setups when needed (air spring cartridge sold separatelty) Race-proven setting bank that features 3 HSC Clicks, 16 LSC Clicks and 16 LSR Clicks New surface treatment on the 38mm stanchions improves small-bump sensitivity and overall ride smoothness and also reduces wear for long-term performance 20 x 110 Boost floating thru-axle set up for minimum friction Compatible with 29" and 27.5" wheels eMTB compatible Item Specifications Brake Type Post Mount 200 Color Gloss Black Crown Race 30 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 20mm Thru x 110mm Boost Lockout Switch Crown Maximum Tire Width 71 Negative Spring Coil Positive Spring Coil S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Straight Travel (mm) 200 Wheel Size 27.5" Wheel Size 29" Ohlins DH38 m.2 Coil Suspension Fork Suspension Fork UPC: 840153644351

by Ohlins

—$1,550

Unleash the next level of racing performance with the latest innovation in Ohlins front suspension - the RXC34 m.1 carbon unicrown fork. Equipped with their race proven floating axle design, the RXC34 m.1 features a chassis with a stiff, yet lightweight aluminum with carbon unicrown construction for precise steering and predictable performance. This is their lightest racing version of the carbon unicrown fork, limited to 100 mm of travel, saving an additional 20 g of weight. Like the aluminum version, the carbon unicrown RXC34 m.1 features an all-new damper and updated air spring, further enhancing speed and control on technical cross-country tracks. As part of the hlins XC suspension system, the RXC34 m.1 features a rider-friendly system for adjusting air spring progressiveness and stroke. And with their race-proven setting bank, you'll be able to fine-tune the fork to your unique riding style and bike linkage. This RXC34 m.1 remote version (remote sold separately) offers 3 ride modes and 16 clicks of rebound adjustment Remote connection is designed for 7.5 mm of wire pull per position which means you can use the shock with remote levers from other top brands Uses the new XC-optimized OTX14 damper that's been extensively designed to provide a slim, lightweight damper packed with technology Highly adjustable with race-proven setting bank to match riding style and bike Two-chamber air spring feature a large negative air chamber balanced with the damper s characteristics in the three different ride modes open, pedal, and lockout Creates the initial movement required for superior traction while retaining best-in-class, predictable support when pushing hard 15mm x 110mm boost floating thru-axle axle design to minimize friction Item Specifications Axle to Crown Length 531 Brake Type Post Mount 180 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Remote Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Type Tapered Travel (mm) 120 Weight 1496 Wheel Size 29" Ohlins RXC34 m.1 Suspension Fork with Carbon Unicrown Suspension Fork UPC: 840153633607

by Ohlins

—$1,550

Unleash the next level of racing performance with the latest innovation in Ohlins front suspension - the RXC34 m.1 carbon unicrown fork. Equipped with their race proven floating axle design, the RXC34 m.1 features a chassis with a stiff, yet lightweight aluminum with carbon unicrown construction for precise steering and predictable performance. This is their lightest racing version of the carbon unicrown fork, limited to 100 mm of travel, saving an additional 20 g of weight. Like the aluminum version, the carbon unicrown RXC34 m.1 features an all-new damper and updated air spring, further enhancing speed and control on technical cross-country tracks. As part of the hlins XC suspension system, the RXC34 m.1 features a rider-friendly system for adjusting air spring progressiveness and stroke. And with their race-proven setting bank, you'll be able to fine-tune the fork to your unique riding style and bike linkage. This RXC34 m.1 remote version (remote sold separately) offers 3 ride modes and 16 clicks of rebound adjustment Remote connection is designed for 7.5 mm of wire pull per position which means you can use the shock with remote levers from other top brands Uses the new XC-optimized OTX14 damper that's been extensively designed to provide a slim, lightweight damper packed with technology Highly adjustable with race-proven setting bank to match riding style and bike Two-chamber air spring feature a large negative air chamber balanced with the damper s characteristics in the three different ride modes open, pedal, and lockout Creates the initial movement required for superior traction while retaining best-in-class, predictable support when pushing hard 15mm x 110mm boost floating thru-axle axle design to minimize friction Item Specifications Axle to Crown Length 511 Brake Type Post Mount 180 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search Suggested Order Lockout Switch Remote Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Type Tapered Travel (mm) 100 Weight 1476 Wheel Size 29" Ohlins RXC34 m.1 Suspension Fork with Carbon Unicrown Suspension Fork UPC: 840153633553

by Ohlins

—$1,350

The RXF36 m.3 features an all-new chassis built around the race-proven TTX18 damper cartridge. This lightweight and highly progressive fork is fully optimized for demanding, next-level trail riding performance. The Ohlins race-winning TTX18 damping technology from the DH38 Race Fork has been adapted to deliver its renowned top-tier traction and control on the most demanding trails. The updated settings and reduced chassis friction offers improved sensitivity for greater traction and comfort to conquer any trail~With the new chassis, the fork delivers ultra-sensitive tracking over small bumps while maintaining Ohlins' signature precise steering and predictable handling-no matter how long or hard it's pushed. RXF36 m.3 features increased internal bushing overlap and an optimized configuration for 29 wheels Race-proven adjustment range is specifically designed for tough trails and provides 16 clicks of low-speed compression, 3 clicks of high-speed compression, and 16 clicks of rebound adjustment Features Ohlins' floating axle design for minimal friction and weighs 2050 g (with bolts and axle) The retuned, twin piston, three chamber air-spring system allows you to completely dial-in the level of progression from the initial movement, right through to the bottom out Air spring is cartridge-based, allowing for easy swaps between coil and air if desired (coil cartridge sold separately) New surface treatment on the 36mm stanchions lowers the friction, boosts small bump sensitivity and overall ride smoothness Updated lowers feature a gloss black finish and bold new graphics, ensuring riders can feel and see the next level of performance every time they hit the trail or park 15mm x 110mm boost floating thru-axle axle design to minimize friction eMTB approved Item Specifications Axle to Crown Length 563 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search Suggested Order Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Type Tapered Travel (mm) 150 Weight 2050 Wheel Size 29" Ohlins RXF36 m.3 Suspension Fork Suspension Fork UPC: 840153642883

by Ohlins

—$1,250

Designed for riders who cover lots of ground-FAST. The new fork replaces the original RXF34, and offers a short-travel 120-130mm setup optimized for lightweight 29er trail bikes. Weighing in at just 1698g, the fork boasts a brand new air spring and damper adapted for the demands of the emerging riding style, while still carrying all the hallmarks of O hlins' race-proven performance suspension seen from its long-travel, single-crown cousins-the RXF36 m.2 & RXF38 m.2. The RXF34 m.2 uses the newly designed OTX18 damper which purpose-built for lightweight trail bikes. The new damper is paired with a robust yet lightweight air spring that features a positive and self-adjusting negative chamber. With a flex pattern tailored for lightweight trail riding, the RXF34 m.2's super-stiff chassis delivers point-and-shoot precision steering. OTX18 damper shares several key components with its bigger TTX18 brother, but weighs 27% less and is optimized for faster and more fluid trail riding, striking the optimal balance between traction, control, weight and stiffness Trail-optimized OTX18 damper offers impressive adjustability for fine-tuning, with fifteen clicks of low-speed compression and rebound adjustment alongside three for tweaks to high-speed compression Lightweight air spring features a positive chamber that allows riders to tune the spring curve according to their needs using hlins easy-to-use volume spacer system Negative chamber of the lightweight air spring has been designed for fast trail riding and provides a plush initial feel and superb small bump sensitivity, while the spring s surface and seals also minimize friction and breakaway force to enhance the fork s smooth ride feel Race-proven chassis design has been achieved via a closed-end outer tube design to increase stiffness, impact resistance and the volume of the lower legs to give the rider more power to fine-tune performance to their liking for greater confidence and control 15mm x 110mm boost floating thru-axle axle design to minimize friction eMTB approved Item Specifications Axle to Crown Length 541 Brake Type Post Mount 180 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Type Tapered Travel (mm) 130 Wheel Size 29" Ohlins RXF34 m.2 Suspension Fork Suspension Fork UPC: 840153623035

by Ohlins

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with Base, R, RC, Select, Select +, and Ultimate versions of RockShox models: RockShox Pike (B1+, NOT C1+) Lyrik (B1+, C1+, and D1+), Yari (B1+), Revelation (A1+) Boost fork models ONLY and ONLY those within compatible travel range (140-170mm) Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Yellow Tune (140-180 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225151

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with FOX 36 (2018-2025) and Marzocchi Z1 (36mm version, 2019+ with a Max travel of 170mm For use with 29" wheel ONLY Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Yellow Tune (140-180 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225120

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with Base, R, RC, Select, Select +, and Ultimate versions of RockShox model: RockShox Zeb (A1+) ONLY compatible those in the travel range of (150-180mm) Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Blue Tune (200-240 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225229

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with Base, R, RC, Select, Select +, and Ultimate versions of RockShox model: RockShox Zeb (A1+) ONLY compatible those in the travel range of (150-180mm) Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Yellow Tune (140-180 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225205

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with Base, R, RC, Select, Select +, and Ultimate versions of RockShox models: RockShox Pike (B1+, NOT C1+) Lyrik (B1+, C1+, and D1+), Yari (B1+), Revelation (A1+) Boost fork models ONLY and ONLY those within compatible travel range (140-170mm) Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Green Tune (170-210 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225168

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with Base, R, RC, Select, Select +, and Ultimate versions of RockShox models: RockShox Pike (B1+, NOT C1+) Lyrik (B1+, C1+, and D1+), Yari (B1+), Revelation (A1+) Boost fork models ONLY and ONLY those within compatible travel range (140-170mm) Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Blue Tune (200-240 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225168

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with Base, R, RC, Select, Select +, and Ultimate versions of RockShox model: RockShox Zeb (A1+) ONLY compatible those in the travel range of (150-180mm) Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Green Tune (170-210 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225212

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with FOX 38 (2021+) with a Max travel of 180mm Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Blue Tune (200-240 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225137

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with FOX 36 (2018-2025) and Marzocchi Z1 (36mm version, 2019+ with a Max travel of 170mm For use with 29" wheel ONLY Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Blue Tune (200-240 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225021

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with FOX 38 (2021+) with a Max travel of 180mm Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Yellow Tune (140-180 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225007

by MRP

—$42

Miscellaneous small air spring spare parts for repairs or service of FOX suspension forks. FOX Miscellaneous Air Spring Parts Air Springs & Parts UPC: 821973510033

by FOX

—$294

FOX 34 SL suspension fork complete damper assemblies for service and repair. FOX 34 SL Damper Assembly Damper, Compression UPC: 821973507507

by FOX

—$42

Top Caps for Fox suspension fork service and repair. FOX Top Caps Top Cap UPC: 821973507637

by FOX

—$357

FOX 34 SL suspension fork Crown/Steerer/Uppertube assembies for service and repair. FOX 34 SL Crown/Steerer/Uppertube Assembly Crown/Steerer/Uppertube Assembly UPC: 821973507491

by FOX

—$294

FOX 34 SL suspension fork lower leg assembies for service and repair. Item Specifications Color Matte Black FOX 34 SL Lower Leg Assembly Lower Leg Assembly UPC: 821973507170

by FOX

—$294

FOX 34 SL suspension fork lower leg assembies for service and repair. Item Specifications Color Shiny Black FOX 34 SL Lower Leg Assembly Lower Leg Assembly UPC: 821973507590

by FOX

—$294

FOX 34 SL suspension fork lower leg assembies for service and repair. Item Specifications Color Shiny Orange FOX 34 SL Lower Leg Assembly Lower Leg Assembly UPC: 821973507217

by FOX

—$278

FOX 34 SL suspension fork Crown/Steerer/Uppertube assembies for service and repair. FOX 34 SL Crown/Steerer/Uppertube Assembly Crown/Steerer/Uppertube Assembly UPC: 821973507255

by FOX

—$105

FOX suspension fork damper top cap assembies for service and repair. FOX Damper Top Caps Top Cap UPC: 821973507811

by FOX

—$299

FOX 36 SL suspension fork lower leg assembies for service and repair. Item Specifications Color Matte Black FOX 36 SL Lower Leg Assembly Lower Leg Assembly UPC: 821973507231

by FOX

—$299

FOX 36 SL suspension fork lower leg assembies for service and repair. Item Specifications Color Shiny Black FOX 36 SL Lower Leg Assembly Lower Leg Assembly UPC: 821973507200

by FOX

—$299

FOX 36 SL suspension fork lower leg assembies for service and repair. Item Specifications Color Shiny Black FOX 36 SL Lower Leg Assembly Lower Leg Assembly UPC: 821973507835

by FOX

—$410

FOX 36 SL suspension fork Crown/Steerer/Uppertube assembies for service and repair. FOX 36 SL Crown/Steerer/Uppertube Assembly Crown/Steerer/Uppertube Assembly UPC: 821973507934

by FOX

—$74

FOX 34 SL suspension fork air shaft assemblies for service and repair. FOX 34 SL Air Shaft Assembly Air Springs & Parts UPC: 821973507552

by FOX

—$336

FOX 36 SL suspension fork complete damper assemblies for service and repair. FOX 36 SL Damper Assembly Damper, Compression UPC: 821973507675

by FOX

—$84

FOX 34 SL suspension fork damper shaft assemblies for service and repair. FOX 34 SL Damper Shaft Assembly Rebound Damper Parts UPC: 821973507644

by FOX