Forks / Parts

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$70

The first step to achieving great suspension is selecting the correct spring. Ohlins offers a wide range of 7 fork spring rates for the RXF38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins RXF38 fork 40 lbs/in spring rate intended for riders weighing between 140 lbs to 160 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (40 lbs/in has yellow bands) 191 mm of actual stroke 335 mm (+/- 3mm) free length 18.5 mm I.D. / 4.2 mm wire diameter Ohlins RXF38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642043

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. Ohlins offers a wide range of 7 fork spring rates for the RXF38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins RXF38 fork 45 lbs/in spring rate intended for riders weighing between 160 lbs to 180 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (45 lbs/in has green bands) 191 mm of actual stroke 335 mm (+/- 3mm) free length 18.5 mm I.D. / 4.4 mm wire diameter Ohlins RXF38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642050

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 55 lbs/in spring rate intended for riders weighing between 200 lbs to 220 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (55 lbs/in has white bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 4.8 mm wire diameter Ohlins DH38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642142

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 40 lbs/in spring rate intended for riders weighing between 140 lbs to 160 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (40 lbs/in has yellow bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 4.3 mm wire diameter Ohlins DH38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642111

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 65 lbs/in spring rate intended for riders weighing between 240 lbs to 260 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (65 lbs/in has red/black/red bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 5.1 mm wire diameter Ohlins DH38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642166

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 60 lbs/in spring rate intended for riders weighing between 220 lbs to 240 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (60 lbs/in has black bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 4.9 mm wire diameter Ohlins DH38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642159

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 45 lbs/in spring rate intended for riders weighing between 160 lbs to 180 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (45 lbs/in has green bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 4.5 mm wire diameter Ohlins DH38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642128

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. Ohlins offers a wide range of 7 fork spring rates for the RXF38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins RXF38 fork 65 lbs/in spring rate intended for riders weighing between 240 lbs to 260 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (65 lbs/in has red/black/red bands) 191 mm of actual stroke 335 mm (+/- 3mm) free length 18.5 mm I.D. / 4.9 mm wire diameter Ohlins RXF38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642098

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. Ohlins offers a wide range of 7 fork spring rates for the RXF38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins RXF38 fork 70 lbs/in spring rate intended for riders weighing 260+ lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (70 lbs/in has yellow/black/yellow bands) 191 mm of actual stroke 335 mm (+/- 3mm) free length 18.5 mm I.D. / 5.0 mm wire diameter Ohlins RXF38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642104

by Ohlins

—$70

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 70 lbs/in spring rate intended for riders weighing 260+ lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (70 lbs/in has yellow/black/yellow bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 5.2 mm wire diameter Ohlins DH38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642173

by Ohlins

—$156

The FOX Twin-Stick Lever combines the functions of both cable suspension lockout and cable dropper post in a sleek and unobtrusive design. Compatible with either 2 (Open, Firm) or 3-position (Open, Medium, Firm) suspension lockout systems. It can be set up for fork only, shock only or fork and shocks simultaneously. Can operate Fork Lockout, Rear Shock Lockout, and Dropper Remote Includes: (1) Remote, (1) I-Spec EV Clamp, (1) 22.2mm Bar Clamp, (3) Cables, (9) Housing ends, (3) Cable ferrules, (3) Cable housing ends, Owners Manual FOX Twin Stick Suspension Lockout/Dropper Post Remote Remotes & Parts UPC: 821973512662

by FOX

—$549

Premium performance at an unbeatable price. Capitalizing on the innovations born from SID, Reba Gold features an air spring inspired by SID, an XC-tuned Isolator RL damper, and a sleek 35mm chassis, delivering top-tier capability without breaking the bank. XC-tuned Isolator RL damper offers Open, 3-Position Open, Pedal, and Lock settings Highly tunable DebonAir air spring Externally adjusted rebound lets rider adjust to their preference 35mm straight wall stanchions feature Fast Black coating to provide improved durability and decreased friction Allows tire widths up to 81mm/3.19 inches Minimum 180mm / Maximum 200mm disc rotor diameter Fork comes with a Bolt On fender, Star nut and Maxle Stealth thru-axle Item Specifications Axle to Crown Length 524 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 265 Steerer Type Tapered Travel (mm) 110 Wheel Size 29" RockShox Reba Gold Isolator RL Suspension Fork Suspension Fork UPC: 710845918155

by RockShox

—$549

Premium performance at an unbeatable price. Capitalizing on the innovations born from SID, Reba Gold features an air spring inspired by SID, an XC-tuned Isolator RL damper, and a sleek 35mm chassis, delivering top-tier capability without breaking the bank. XC-tuned Isolator RL damper offers Open, 3-Position Open, Pedal, and Lock settings Highly tunable DebonAir air spring Externally adjusted rebound lets rider adjust to their preference 35mm straight wall stanchions feature Fast Black coating to provide improved durability and decreased friction Allows tire widths up to 81mm/3.19 inches Minimum 180mm / Maximum 200mm disc rotor diameter Fork comes with a Bolt On fender, Star nut and Maxle Stealth thru-axle Item Specifications Axle to Crown Length 544 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 265 Steerer Type Tapered Travel (mm) 130 Wheel Size 29" RockShox Reba Gold Isolator RL Suspension Fork Suspension Fork UPC: 710845918179

by RockShox

—$549

Premium performance at an unbeatable price. Capitalizing on the innovations born from SID, Reba Gold features an air spring inspired by SID, an XC-tuned Isolator RL damper, and a sleek 35mm chassis, delivering top-tier capability without breaking the bank. XC-tuned Isolator RL damper offers Open, 3-Position Remote-Operated (Remote sold separately) Open, Pedal, and Lock settings Highly tunable DebonAir air spring Externally adjusted rebound lets rider adjust to their preference 35mm straight wall stanchions feature Fast Black coating to provide improved durability and decreased friction Allows tire widths up to 81mm/3.19 inches Minimum 180mm / Maximum 200mm disc rotor diameter Fork comes with a Bolt On fender, Star nut and Maxle Stealth thru-axle Item Specifications Axle to Crown Length 534 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Handlebar Remote Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 265 Steerer Type Tapered Travel (mm) 120 Wheel Size 29" RockShox Reba Gold Isolator RL Suspension Fork Suspension Fork UPC: 710845918209

by RockShox

—$549

Premium performance at an unbeatable price. Capitalizing on the innovations born from SID, Reba Gold features an air spring inspired by SID, an XC-tuned Isolator RL damper, and a sleek 35mm chassis, delivering top-tier capability without breaking the bank. XC-tuned Isolator RL damper offers Open, 3-Position Open, Pedal, and Lock settings Highly tunable DebonAir air spring Externally adjusted rebound lets rider adjust to their preference 35mm straight wall stanchions feature Fast Black coating to provide improved durability and decreased friction Allows tire widths up to 81mm/3.19 inches Minimum 180mm / Maximum 200mm disc rotor diameter Fork comes with a Bolt On fender, Star nut and Maxle Stealth thru-axle Item Specifications Axle to Crown Length 514 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 265 Steerer Type Tapered Travel (mm) 100 Wheel Size 29" RockShox Reba Gold Isolator RL Suspension Fork Suspension Fork UPC: 710845918148

by RockShox

—$549

Premium performance at an unbeatable price. Capitalizing on the innovations born from SID, Reba Gold features an air spring inspired by SID, an XC-tuned Isolator RL damper, and a sleek 35mm chassis, delivering top-tier capability without breaking the bank. XC-tuned Isolator RL damper offers Open, 3-Position Open, Pedal, and Lock settings Highly tunable DebonAir air spring Externally adjusted rebound lets rider adjust to their preference 35mm straight wall stanchions feature Fast Black coating to provide improved durability and decreased friction Allows tire widths up to 81mm/3.19 inches Minimum 180mm / Maximum 200mm disc rotor diameter Fork comes with a Bolt On fender, Star nut and Maxle Stealth thru-axle Item Specifications Axle to Crown Length 534 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 265 Steerer Type Tapered Travel (mm) 120 Wheel Size 29" RockShox Reba Gold Isolator RL Suspension Fork Suspension Fork UPC: 710845918162

by RockShox

—$55

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 130 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm / 170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640360

by Ohlins

—$262

Replacement stanchion for use on all Ohlins DH forks that have 38mm stanchions. Replacement stanchion for all Ohlins DH forks with 38mm stanchions Black-anodized with a hard-coat outer seal Nicro-polished at the factory for optimal performance Ohlins Stanchion Tube Crown/Steerer/Uppertube Assembly UPC: 840153640629

by Ohlins

—$55

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 90mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm 90 mm tube intended to convert RXF36 forks for dirt jumping Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640438

by Ohlins

—$55

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 140 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640377

by Ohlins

—$46

These service kits for Ohlins fork damper cartridges include common wear items to perform a 100-hour damper service. Simplified 100-hour damper service kit covers all common wear items for the OTX18 fork damper cartridge (OTX18 cartridge is found in the RXF34 m.2 series of forks) Includes dynamic sealing replacements Individually labeled when necessary to ease identification Please note that not all pieces will be used Ohlins 100 Hour Damper Service Kit Service Kit UPC: 840153623790

by Ohlins

—$100

These comprehensive rebuild kits for Ohlins fork damper cartridges include all dynamic and static wear items to perform a thorough 200-hour damper rebuild service. This is the more thorough rebuild kit (also called the "200-hour" kit) for the OTX18 fork damper cartridge (OTX18 cartridge is only found in the RXF34 m.2) Use this kit if the fork has skipped a few services, has been abused, or exhibits any signs of leaking Includes dynamic and static seal replacement pieces Also includes less common items like IFP springs, reservoir pistons, and spring guides (Please note that not all parts will be used upon completion) Individually labelled when necessary to ease identification Ohlins 200 Hour Damper Rebuid Kit Service Kit UPC: 840153623783

by Ohlins

—$55

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 120 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640353

by Ohlins

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with RockShox models: SID (35mm C1+ and D1+), Lyrik D1+, and Pike C1+ New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224710

by MRP

—$48

The Ohlins service kit for their suspension fork air spring cartridges includes common wear items to perform the 100 hour/standard service. Standard service kit (also known as the "100-hour" kit) for the 2-chamber "more traditional" air spring found only on the RXF34 m.2 fork Designed to be used for use routine service Includes the seal head circlip, and the dynamic seals (X-ring, backup rings, etc.) Ohlins 100 Hour Air Spring Service Kit Service Kit UPC: 840153623745

by Ohlins

—$99

These comprehensive rebuild kits for Ohlins fork damper cartridges include all dynamic and static wear items to perform a thorough 200-hour damper rebuild service. This is the more thorough rebuild kit (also called the "200-hour" kit) for the OTX14 fork damper cartridge used on all XC forks (RXC34 m.1, carbon and alloy crown) Use this kit if the fork has skipped a few services, has been abused, or exhibits any signs of leaking Includes the most useful replacement dynamic and static seals Also includes less common items like the rubber membrane for fluid expansion, tiny ball bearings and springs for the adjusters, and circlips Seperate bags and labels have been provided for the different adjusters (manual and remote) Ohlins 200 Hour Damper Rebuid Kit Service Kit UPC: 840153641633

by Ohlins

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible RockShox models: Pike 2015+, Newer Pike forks with "Boost" 15x110 axle spacing and all 2017 and newer Pike forks (regardless of axle spacing), Lyrik 2017+, Revelation 2017-2022 (35mm) Recommended for 140mm+ 29 , 27.5+, 26 and 27.5 forks New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224765

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with RockShock ZEB 2020+ (All travels and both wheel-size options) New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224772

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX 32 Float 2016+ with the FIT 4 and Grip dampers (Recommended for 100-130mm 26 , 27.5 and 29" forks) Not recommended for 80-90mm forks NOT compatible with 140-150mm forks or FOX 32 Step Cast forks New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224833

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX models: 34 Float 2016-2021forks (Recommended for 140-160mm 29 , 27.5+, and 27.5 forks), 34 Float 2022+ (130-140mm 29 forks, FOX 34 Step Cast 2019+ (Recommended for 110-120mm 29 forks) Also compatible with Marzocchi 2020 Z2 (Recommended for 140-160mm 29 , 27.5+, and 27.5 forks) Cartridges NOT compatible with TALAS forks New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224789

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX Models: FOX 36 Float 2018+ (Recommended for 140-180mm 29 , 27.5+, and 27.5 forks) Also compatible with Marzocchi Z1 (Air Only) 2019+ (All travel options) New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224741

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX 40 Float Factory 2016+ and FOX 40 Performance Elite 2016+ New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224796

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Model D (long body) is compatible with RockShox models: Pike 2015-2022 with "Boost" 15x110 axle spacing, Pike 2017+ (regardless of axle spacing), Revelation 2017-2022 (35mm) Recommended for 120 and 130mm 29 /27.5+ and 120mm 27.5 and 26 forks New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224819

by MRP

—$70

Replacement 20mm x 110mm DH Boost thru-axle for the Ohlins DH38 m.1 and m.2 Includes (2x) M6 x 16 bolts for axle clamp.Replacment thru-axle includes (2) M6 x 16 axle clamp bolts Ohlins Replacement Axle Axles & Axle Parts UPC: 840153640636

by Ohlins

—$300

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 160mm air spring cartridge for the RXF38 m.2 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup Ohlins Complete Air Spring Cartridge Assembly Air Springs & Parts UPC: 840153644696

by Ohlins

—$245

This air spring shaft kits are used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins. This 130mm air spring shaft kit is used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins The original fork's top cap is reused; only the shaft assembly is replaced The kit includes the lower shaft assembly, all dynamic air piston seals, new circlips, and a new footnut The air shaft has 4 negative volume spacers installed from the factory, which are adjustable to customize the level of support and suppleness in addition to the adjustable volume in the main spring Interchangeable with RXF34 chassis Ohlins Air Spring Shaft Assembly Air Springs & Parts UPC: 840153641404

by Ohlins

—$12.88

This kit includes four small, pellet-shaped volume spacers, used to adjust the negative air volume found in the air spring shaft in the Ohlins RXF34 m.1 fork. Remove the negative volumes spacers for a more supple off-the-top feeling. Add spacers to gain more initial support and tire feel. Allows riders to customize the feel of their Ohlins RXC34 m.1 air spring Includes (4) spacers Remove spacers for an easier breakaway force or add spacers to gain more support and tire feel Only works on the XC-specific air spring in the Ohlins RXC34 m.1 fork Ohlins Suspension Fork Air Spring Negative Volume Spacer Air Springs & Parts UPC: 840153641466

by Ohlins

—$245

This air spring shaft kits are used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins. This 110mm air spring shaft kit is used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins The original fork's top cap is reused; only the shaft assembly is replaced The kit includes the lower shaft assembly, all dynamic air piston seals, new circlips, and a new footnut The air shaft has 4 negative volume spacers installed from the factory, which are adjustable to customize the level of support and suppleness in addition to the adjustable volume in the main spring Interchangeable with RXF34 chassis Ohlins Air Spring Shaft Assembly Air Springs & Parts UPC: 840153641381

by Ohlins

—$245

This air spring shaft kits are used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins. This 100mm air spring shaft kit is used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins The original fork's top cap is reused; only the shaft assembly is replaced The kit includes the lower shaft assembly, all dynamic air piston seals, new circlips, and a new footnut The air shaft has 4 negative volume spacers installed from the factory, which are adjustable to customize the level of support and suppleness in addition to the adjustable volume in the main spring Interchangeable with RXF34 chassis Ohlins Air Spring Shaft Assembly Air Springs & Parts UPC: 840153641374

by Ohlins

—$245

This air spring shaft kits are used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins. This 120mm air spring shaft kit is used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins The original fork's top cap is reused; only the shaft assembly is replaced The kit includes the lower shaft assembly, all dynamic air piston seals, new circlips, and a new footnut The air shaft has 4 negative volume spacers installed from the factory, which are adjustable to customize the level of support and suppleness in addition to the adjustable volume in the main spring Interchangeable with RXF34 chassis Ohlins Air Spring Shaft Assembly Air Springs & Parts UPC: 840153641398

by Ohlins

—$330

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 200mm air spring cartridge for the DH38 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup Ohlins Complete Air Spring Cartridge Assembly Air Springs & Parts UPC: 840153640728

by Ohlins

—$300

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 180mm air spring cartridge for the RXF38 m.2 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup Ohlins Complete Air Spring Cartridge Assembly Air Springs & Parts UPC: 840153644719

by Ohlins

—$330

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 180mm air spring cartridge for the DH38 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup Ohlins Complete Air Spring Cartridge Assembly Air Springs & Parts UPC: 840153640735

by Ohlins