Forks / Parts

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 180 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640414

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 160 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640391

by Ohlins

—$79.65

The Ohlins 200 hour rebuild kit for their suspension fork air spring cartridges includes all major wear items for a more thorough rebuild. Thorough rebuild kit (also called the "200-hour" kit) for the 3-chamber air spring cartridge The 3-chamber air spring cartridge is found in all RXF36, RXF38, and DH38 forks Use this kit if the fork has skipped a few services, has been abused, or exhibits any signs of leaking Includes less common wear items, such as Schrader valves, IFP bump rubber, and seal head scrapers (Please note that not all parts will be used upon completion Individually labeled when necessary to ease identification Ohlins 200 Hour Air Spring Rebuild Kit Service Kit UPC: 840153641510

by Ohlins

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX 38 Factory 2021+ and FOX 38 Factory, Performance Elite, and Performance 2021+ New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224857

by MRP

—$250

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 170mm air spring cartridge for the RXF38 m.2 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup Ohlins Complete Air Spring Cartridge Assembly Air Springs & Parts UPC: 840153644702

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 150 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640384

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 170 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640407

by Ohlins

—$294

FOX 36 Lower Leg Assembies for service and repair. Item Specifications Color Matte Black FOX 36 Lower Leg Assembly Lower Leg Assembly UPC: 821973507781

by FOX

—$26

Fox Float NA Air Spring Rebuild Kit. FOX Float Spring Rebuild Kit Air Springs & Parts UPC: 821973509709

by FOX

—$399

FOX 36 SL suspension fork complete damper assemblies for service and repair. FOX 36 SL Damper Assembly Damper, Compression UPC: 821973507941

by FOX

—$336

FOX 34 SL suspension fork complete damper assemblies for service and repair. FOX 34 SL Damper Assembly Damper, Compression UPC: 821973507620

by FOX

—$103.95

With the Ride Mode Remote for XC suspension, you can control both your rear shock and front fork suspension. Compatible with Ohlins front forks and shocks featuring a remote connection, it offers three ride mode positions and dual wire pull for adjusting both front and rear. For the remote connection versions, Ohlins developed a remote with a flexible solution where it is possible to add a dropper lever underneath the remote. It is also highly adjustable - it has three positions for the ride modes and adjusts the front and rear suspension at the same time. Designed for seamless integration, it works with the Matchmaker X interface, and the detachable Matchmaker-X-compatible mount allows for seat post remote attachment. It can also be mounted directly to a SRAM brake lever without using a clamp, creating a compact and streamlined control center on your handlebars. Designed for 7.5 mm of wire pull per position to allow use the shock with remote levers from other top brands Lever-actuated 3-position ride remote includes descending, pedaling, and lockout Clamp works with the Matchmaker X interface Two lever blade remote device includes bar clamp, Removable Matchmaker X plate, two cables Ohlins Suspension Fork / Rear Shock Remote Lever Remotes & Parts UPC: 840153638268

by Ohlins

—$434.50

hlins offers four different crown sets for DH38 suspension fork that differ in offset, allowing riders to further customize their ride. Offset is the distance between the wheel axle and the steerer tube and affects how the bike steers by changing the "trail" dimension. There are three different offsets: 46mm, 50mm, 54mm, and 58mm. Typically, shorter offsets are more stable but require more steering input to change direction. The opposite is true, too; the longer the offset, the easier it is to steer, but it will be less stable at speed. Most DH bikes with 29" wheels use 58mm and 54mm offset, while DH bikes with 27.5" front wheels use 46mm. Provides 50mm offset to DH38 suspension forks Includes one lower crown with a straight 1.125" steerer tube pressed in Includes two upper crowns; one flat, one drop crown Comes with two rubber fork bumpers M6 x 16 clamp bolts Black Anodized Finish Ohlins DH38 Suspension Fork Crownset Crown/Steerer/Uppertube Assembly UPC: 840153633492

by Ohlins

—$434.50

hlins offers four different crown sets for DH38 suspension fork that differ in offset, allowing riders to further customize their ride. Offset is the distance between the wheel axle and the steerer tube and affects how the bike steers by changing the "trail" dimension. There are three different offsets: 46mm, 50mm, 54mm, and 58mm. Typically, shorter offsets are more stable but require more steering input to change direction. The opposite is true, too; the longer the offset, the easier it is to steer, but it will be less stable at speed. Most DH bikes with 29" wheels use 58mm and 54mm offset, while DH bikes with 27.5" front wheels use 46mm. Provides 54mm offset to DH38 suspension forks Includes one lower crown with a straight 1.125" steerer tube pressed in Includes two upper crowns; one flat, one drop crown Comes with two rubber fork bumpers M6 x 16 clamp bolts Black Anodized Finish Ohlins DH38 Suspension Fork Crownset Crown/Steerer/Uppertube Assembly UPC: 840153633508

by Ohlins

—$1,675

New DH38 m.2 air sprung suspension fork with features reworked internals and updated settings, built around the race-proven TTX18 cartridge. This powerful fork is the ultimate downhill weapon, delivering hard-hitting performance through its dual-crown design. The new DH38 m.2 fork is the most advanced downhill fork Ohlins has ever created, offering improvements in comfort, sensitivity, and bottom-out control. Bottom-out progressiveness has been increased with the addition of a spring booster, and the system is further optimized for use with volume spacers, giving riders greater flexibility to fine-tune their ride feel. With these upgrades, the new DH38 m.2 is the ultimate fork for gravity riders charging down the steepest lines and attacking the most demanding courses-engineered to push harder, land bigger, and inspire full confidence. Four separately sold DH Crowns, you can choose from 46-, 50-, 54-, or 58-mm offset options to match your setup and preferred riding style Independent cartridge spring and damper systems Air-sprung for maximum adjustability Cartridge-based spring system allows for quick swaps between Air and Coil setups when needed (coil cartridge sold separatelty) Race-proven setting bank that features 3 HSC Clicks, 16 LSC Clicks and 16 LSR Clicks New surface treatment on the 38mm stanchions improves small-bump sensitivity and overall ride smoothness and also reduces wear for long-term performance 20mm x 110mm Boost floating thru-axle set up for minimum friction Compatible with 29" and 27.5" wheels eMTB compatible Item Specifications Brake Type Post Mount 200 Color Gloss Black Crown Race 30 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 20mm Thru x 110mm Boost Lockout Switch Crown Maximum Tire Width 71 Negative Spring Air Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Straight Travel (mm) 200 Wheel Size 27.5" Wheel Size 29" Ohlins DH38 m.2 Suspension Fork Suspension Fork UPC: 840153633539

by Ohlins

—$1,534.50

The new RXF38 m.3 features reworked internals and updated settings, built around the race-proven TTX18 damper cartridge. This stiff fork is the perfect match for e-MTBs, aggressive trail riding and enduro racing, delivering significant performance upgrades on every ride. The new RXF38 m.3 fork delivers hard-hitting, dual-crown downhill performance in a single-crown design, with improvements in comfort, sensitivity, and bottom-out control. Bottom-out progressiveness has been increased with the addition of a spring booster, and the system is further optimized for use with volume spacers, giving riders greater flexibility to fine-tune their ride feel. With these upgrades, the new RXF38 m.3 fork is the most advanced trail fork Ohlins has ever created and your top choice when the trails get steeper, the rock gardens rougher, and the gaps bigger. The RXF38 m.3 s adjustment range provides 16 clicks of low-speed compression, 3 clicks of high-speed compression, and 16 clicks of rebound adjustment Cartridge-based air spring allows for quick swaps between air and coil setups when needed (coil cartridge sold separately) Features Ohlins floating axle design to minimize friction and weighs 2,320 g (with bolts and axle) For 29 wheel sized frames New surface treatment on the 38mm stanchions improves small-bump sensitivity and overall ride smoothness in the new RXF38 m.3 Updated lowers feature a gloss black finish and bold new graphics, ensuring riders can both feel and see the next level of performance every time they hit the trail or park 15mm x 110mm boost floating thru-axle axle design to minimize friction eMTB approved Item Specifications Axle to Crown Length 573 Brake Type Post Mount 200 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Tapered Travel (mm) 160 Weight 2320 Wheel Size 29" Ohlins RXF38 m.3 Suspension Fork Suspension Fork UPC: 840153644368

by Ohlins

—$1,369.50

The RXF36 m.3 features an all-new chassis built around the race-proven TTX18 damper cartridge. This lightweight and highly progressive fork is fully optimized for demanding, next-level trail riding performance. The Ohlins race-winning TTX18 damping technology from the DH38 Race Fork has been adapted to deliver its renowned top-tier traction and control on the most demanding trails. The updated settings and reduced chassis friction offers improved sensitivity for greater traction and comfort to conquer any trail~With the new chassis, the fork delivers ultra-sensitive tracking over small bumps while maintaining Ohlins' signature precise steering and predictable handling-no matter how long or hard it's pushed. RXF36 m.3 features increased internal bushing overlap and an optimized configuration for 29 wheels Race-proven adjustment range is specifically designed for tough trails and provides 16 clicks of low-speed compression, 3 clicks of high-speed compression, and 16 clicks of rebound adjustment Features Ohlins' floating axle design for minimal friction and weighs 2050 g (with bolts and axle) The retuned, twin piston, three chamber air-spring system allows you to completely dial-in the level of progression from the initial movement, right through to the bottom out Air spring is cartridge-based, allowing for easy swaps between coil and air if desired (coil cartridge sold separately) New surface treatment on the 36mm stanchions lowers the friction, boosts small bump sensitivity and overall ride smoothness Updated lowers feature a gloss black finish and bold new graphics, ensuring riders can feel and see the next level of performance every time they hit the trail or park 15mm x 110mm boost floating thru-axle axle design to minimize friction eMTB approved Item Specifications Axle to Crown Length 553 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Type Tapered Travel (mm) 140 Weight 2050 Wheel Size 29" Ohlins RXF36 m.3 Suspension Fork Suspension Fork UPC: 840153642869

by Ohlins

—$1,534.50

The new RXF38 m.3 features reworked internals and updated settings, built around the race-proven TTX18 damper cartridge. This stiff fork is the perfect match for e-MTBs, aggressive trail riding and enduro racing, delivering significant performance upgrades on every ride. The new RXF38 m.3 fork delivers hard-hitting, dual-crown downhill performance in a single-crown design, with improvements in comfort, sensitivity, and bottom-out control. Bottom-out progressiveness has been increased with the addition of a spring booster, and the system is further optimized for use with volume spacers, giving riders greater flexibility to fine-tune their ride feel. With these upgrades, the new RXF38 m.3 fork is the most advanced trail fork Ohlins has ever created and your top choice when the trails get steeper, the rock gardens rougher, and the gaps bigger. The RXF38 m.3 s adjustment range provides 16 clicks of low-speed compression, 3 clicks of high-speed compression, and 16 clicks of rebound adjustment Cartridge-based air spring allows for quick swaps between air and coil setups when needed (coil cartridge sold separately) Features Ohlins floating axle design to minimize friction and weighs 2,320 g (with bolts and axle) For 29 wheel sized frames New surface treatment on the 38mm stanchions improves small-bump sensitivity and overall ride smoothness in the new RXF38 m.3 Updated lowers feature a gloss black finish and bold new graphics, ensuring riders can both feel and see the next level of performance every time they hit the trail or park 15mm x 110mm boost floating thru-axle axle design to minimize friction eMTB approved Item Specifications Axle to Crown Length 593 Brake Type Post Mount 200 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Tapered Travel (mm) 180 Weight 2320 Wheel Size 29" Ohlins RXF38 m.3 Suspension Fork Suspension Fork UPC: 840153644399

by Ohlins

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with FOX 36 (2018-2025) and Marzocchi Z1 (36mm version, 2019+ with a Max travel of 170mm For use with 29" wheel ONLY Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Green Tune (170-210 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225250

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with FOX 38 (2021+) with a Max travel of 180mm Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Green Tune (170-210 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225014

by MRP

—$42

Air spring seal kits for Fox suspension repair and rebuild. FOX Air Spring Seal Kit Air Springs & Parts UPC: 821973509693

by FOX

—$331

FOX 36 SL suspension fork Crown/Steerer/Uppertube assembies for service and repair. FOX 36 SL Crown/Steerer/Uppertube Assembly Crown/Steerer/Uppertube Assembly UPC: 821973507156

by FOX

—$74

FOX 34 SL suspension fork air shaft assemblies for service and repair. FOX 34 SL Air Shaft Assembly Air Springs & Parts UPC: 821973507538

by FOX

—$194

FOX 36 SL suspension fork complete damper assemblies for service and repair. FOX 36 SL Damper Assembly Damper, Compression

by FOX

—$2,099

Engineered for unforgiving descents, technical race lines, and the world's most demanding riders, FOX introduces Factory Podium Inverted, a new benchmark in single crown fork performance. Delivering exceptional fore-aft rigidity, ultra-smooth travel, and DH-style confidence, Podium brings an unfair advantage to enduro racers and all-mountain riders alike. Podium is designed to be ridden like a downhill fork. No barriers. No hesitation. Complete confidence that your front wheel will hold the line, no matter how fast-or how big-you push it. All this while keeping your bike in a familiar range of travel and geometry in a single crown package. Fox designed this inverted fork to get the absolute maximum performance out of the industry leading GRIP X2 damper, with every possible gain for smoothness in its travel and confidence-inducing fore-aft rigidity in the chassis. Welcome to the Unfair Advantage. Welcome to Podium. To take full advantage of a damper s capabilities, FOX engineers pursued the optimal design to provide ultra-low friction under load by turning the traditional fork design on its head with an inverted chassis, providing unmatched damping sensitivity when combined with the award-winning Grip X2 damper At the core of Factory Podium Inverted is uncompromising fore-aft stiffness made possible by oversized 47mm upper tubes and a generatively-designed crown structure, allowing riders to hold precise lines with total confidence even at downhill speeds To further increase torsional stiffness, FOX replaced the standard 15mm axle with a steel 20 x 110mm Boost DH axle, distributing forces more evenly across the lower leg interface 175mm of bushing overlap is 32% more than the 38 and even 7% more than the FOX 40 to deliver an unbeatable chassis stiffness and reduced friction under heavy loads The FLOAT EVOL GlideCore air spring, designed with built-in lateral and axial compliance, allows the spring to flex with the fork under high loads, reducing binding and stiction for a smoother ride feel, improved small bump sensitivity, and better control when the terrain gets wild Specially tuned GRIP X2 damper, known for its four-way adjustability and race-proven control, offers enhanced compression damping to match the fork s reduced friction and slightly softened rebound to balance lower unsprung mass, resulting in a damping curve designed for aggressive descending, enduro competition, and eMTB domination Full oil immersion keeps seals constantly lubricated while gravity helps shed contamination and reduce friction Kashima Coating on lower tubes for added durability Item Specifications Axle to Crown Length 576 Brake Type Post Mount 200 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 20mm Thru x 110mm Boost keyword search FOX Model Year 26 keyword search FOX MY26 Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 160 Weight 2695 Wheel Size 29" FOX Factory Podium Inverted Suspension Fork Suspension Fork UPC: 821973513232

by FOX

—$1,199

The most versatile fork in the RockShox lineup, Lyrik Ultimate harmonizes descending power with effortless efficiency. Lyrik's legendary performance enters a new era with the Charger 3.1 RC2 damper that offers a wider tunable range of adjustments for the perfect suspension action. Lyrik Ultimate packs an orchestra of industry-leading tech like the ButterCups technology and a DebonAir+ air spring in a stout 35mm chassis. Now better than ever, Lyrik is ready to push your limits. Charger 3.1 is the evolution of SRAM's proven damper platform that offers increased damping range, High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments for a smoother ride Charger 3.1 RC2 s adjustment range is broader with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day ButterCups block 20% of high-frequency vibrations and massively reduces hand and arm fatigue DebonAir+ air spring is built to provide a balance of a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride Lightweight machined and anodized crown for premium looks and durability Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel Item Specifications Axle to Crown Length 551 Brake Type Post Mount 180 Color Electric Red Crown Race 40 Defined Color Red External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 265 Steerer Type Tapered Travel (mm) 140 Weight 2028 Wheel Size 29" RockShox Lyrik Ultimate Charger 3.1 RC2 Suspension Fork Suspension Fork UPC: 710845917073

by RockShox

—$999

This is RockShox Pike DJ. It's a cousin to the award-winning Pike, which makes it look a lot like a trail fork, until you ride it. Pike DJ is built on a stout 35mm chassis and includes a custom-tuned Charger damper and specific Solo Air system designed for more bottom-out progression than you'll ever need because your trails eventually require some landings. Proven Charger damper with specific Dirt Jumping/Slopestyle tune Specific Solo Air top cap for extra bottom-out progression Maxima Lower Leg Performance lube reduces friction and enhances fork performance ride after ride Accepts Bottomless Tokens to easily custom tune the air spring performance to best match your own riding style and suspension preference Item Specifications Axle to Crown Length 482 Brake Type Post Mount 160 Color Electric Red Crown Race 40 Defined Color Red External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Maximum Tire Width 66 Negative Spring Air Offset 40 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 265 Steerer Type Tapered Travel (mm) 100 Weight 1880 Wheel Size 26" RockShox Pike DJ Suspension Fork Suspension Fork UPC: 710845917776

by RockShox

—$1,099

Climb mountains. Charge descents. The RockShox SID Ultimate isn't like other XC forks. It is lighter than ever with a formidable 35mm chassis that holds the line when you're on the edge. The Race Day 2 damper provides efficient Pedal positions, all at your fingertips. SID Ultimate adapts to everything from full-gas cross-country to sporty backcountry loops thanks to a new, higher-volume DebonAir+ spring that's supple at the top of its travel with tons of tunability. 35mm chassis is the perfect blend of light weight and rigidity for the modern XC bike Charger Race Day 2 3P damper is one of the lightest damper on the market and features three compression positions: Open, Pedal, or a rock-solid Lock (Remote sold separate) DebonAir+ provides more small-bump sensitivity and tunable mid-stroke support Bushing package maximizes bushing overlap for a smooth, solid ride Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride Crown machined to shave weight without compromising strength and stiffness Bolt-in torque cap adapters included for use with standard hub end-caps 3 position remote (Cable Pull 7mm + 7mm sold separately) Item Specifications Axle to Crown Length 531 Brake Type Post Mount 180 Color Electric Red Crown Race 40 Defined Color Red External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 230 Steerer Type Tapered Travel (mm) 120 Weight 1480 Wheel Size 29" RockShox SID Ultimate Race Day 2 Suspension Fork Suspension Fork UPC: 710845916946

by RockShox

—$1,149

Packed with features to dominate the descents, the 36 Performance Elite answers the call from aggressive all-mountain riders. Trail and all-mountain riders no longer need to choose between a descent-focused damper or a lightweight endurance damper. The GRIP X damper exudes exemplary descent performance, refined for less weight, easier set up and an easy access firm mode for pedaling efficiency. GRIP X damper exudes exemplary descent performance, refined for less weight, easier set up and an easy access firm mode for pedaling efficiency Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increasing stiffness and boosting performance New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably Lower leg bypass channels were relocated 90 inboard to a lower stress area, reducing dynamic friction under bending forces Double-butted stanchion (on damper side) shaves weight, helping us achieve goal of zero weight increase New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) Redesigned bleeders are sleeker and easier to operate Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design Black anodized upper tubes for added durability Item Specifications Axle to Crown Length 576 Brake Type Post Mount 200 Color Matte Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search FOX Model Year 26 , FOX MY26 Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 160 Wheel Size 29" FOX 36 Performance Elite GRIP X Suspension Fork Suspension Fork UPC: 821973504193

by FOX

—$1,259

The award winning 36 continues its all-mountain domination with a reinforced chassis to handle the increased loads of eMTB and World Cup EDR-E racing. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options. GRIP X2 is the most tunable, supportive and smoothest descent-focused damper FOX has created so riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction and experience reduced fatigue Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increasing stiffness and boosting performance New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably Lower leg bypass channels were relocated 90 inboard to a lower stress area, reducing dynamic friction under bending forces Double-butted stanchion (on damper side) shaves weight, helping us achieve goal of zero weight increase New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) Redesigned bleeders are sleeker and easier to operate Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design Kashima Coating on upper tubes for added smoothness and durability Item Specifications Axle to Crown Length 576 Brake Type Post Mount 200 Color Shiny Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search FOX Model Year 26 , FOX MY26 Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 160 Wheel Size 29" FOX 36 E-Optimized Factory GRIP X/X2 Suspension Fork Suspension Fork UPC: 821973504070

by FOX

—$1,259

Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options. GRIP X2 is the most tunable, supportive and smoothest descent-focused damper FOX has created so riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction and experience reduced fatigue Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increasing stiffness and boosting performance New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably Lower leg bypass channels were relocated 90 inboard to a lower stress area, reducing dynamic friction under bending forces Double-butted stanchion (on damper side) shaves weight, helping us achieve goal of zero weight increase New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) Redesigned bleeders are sleeker and easier to operate Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design Kashima Coating on upper tubes for added smoothness and durability Item Specifications Axle to Crown Length 576 Brake Type Post Mount 200 Color Shiny Orange Crown Race 40 Defined Color Orange External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search FOX Model Year 26 , FOX MY26 Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 160 Wheel Size 29" FOX 36 Factory GRIP X/X2 Suspension Fork Suspension Fork UPC: 821973504223

by FOX

—$1,259

Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options. GRIP X damper exudes exemplary descent performance, refined for less weight, easier set up and an easy access firm mode for pedaling efficiency Generative design-assisted lower leg arch shape increases torsional stiffness by 20%, while reducing overall material Additional 30mm bushing overlap than the prior model 36, reduces chassis friction, increasing stiffness and boosting performance New compliant FLOAT EVOL air spring design allows for a slight misalignment under load, reducing chassis friction noticeably Lower leg bypass channels were relocated 90 inboard to a lower stress area, reducing dynamic friction under bending forces Double-butted stanchion (on damper side) shaves weight, helping us achieve goal of zero weight increase New air spring top cap for easier air volume adjustments, removable with cassette tool (Sold separately) Redesigned bleeders are sleeker and easier to operate Kabolt X axle shaves grams while increasing torsional stiffness via a sleeveless, single-sided pinch bolt design Kashima Coating on upper tubes for added smoothness and durability Item Specifications Axle to Crown Length 576 Brake Type Post Mount 200 Color Shiny Orange Crown Race 40 Defined Color Orange External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search FOX Model Year 26 , FOX MY26 Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 160 Wheel Size 29" FOX 36 Factory GRIP X/X2 Suspension Fork Suspension Fork UPC: 821973504063

by FOX

—$1,209

Trail riders have long had to choose between over-forking for stiffness or under-forking for lower weight. The 36 SL Factory suspension fork takes the new 36 chassis and saves weight at strategic locations, creating a no-compromise lightweight fork for today's hard-hitting-yet shorter travel-Trail riders. Features Kashima Coating on upper tubes for added smoothness and durability GRIP X damper exudes exemplary descent performance, refined for less weight, easier set up and an easy access firm mode for pedaling efficiency Air spring top cap uses cassette tool for easy volume adjustments New generatively designed arch and crown shaping increase torsional stiffness by 20% over 34 while minimizing weight increase New compliant air spring design reduces chassis friction New double-butted damper side stanchion sheds grams Lower Leg Bypass Channels relocated 90 inboard for improved bushing loading and reduced dynamic friction New easier to operate, low-profile bleeders Item Specifications Axle to Crown Length 556 Brake Type Post Mount 180 Color Shiny Orange Crown Race 40 Defined Color Orange External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search FOX Model Year 26 , FOX MY26 Lockout Switch Crown Maximum Tire Width 63.5 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Type Tapered Travel (mm) 140 Wheel Size 29" FOX 36 SL Factory Suspension Fork Suspension Fork UPC: 821973504148

by FOX

—$1,149

XC courses are more technical than ever with the latest longer-travel XC bikes more than capable. With a stout full-width stance, increased travel and tire clearance and svelte sub-1500g weight, the new 34 SL Factory suspension fork is built to exceed the demands of modern XC and downcountry. Features Kashima Coating on upper tubes for added smoothness and durability Features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class GRIP SL Push-Lock (Remote Operated) damper has three on-the-fly compression damping positions: Open, Medium, Firm (Remote Sold Separately) Air spring top cap uses cassette tool for easy volume adjustments Full-width 34mm chassis with aggressive generative design-aided arch and crown for 17% increase in stiffness and 10mm increase in travel over 34 SC, at only 3% weight increase 20mm increased bushing overlap for reduced friction and greater stiffness with no increase in axle-to-crown length (compared to 34 SC) Longer air spring than 34 SC with larger negative volume mirrors 34 LT s supple initial stroke and 34 SC s supportive mid and end stroke Double-butted damper side stanchion for weight savings Lower Leg Bypass Channels relocated 90 inboard for improved bushing loading and reduced dynamic friction Item Specifications Axle to Crown Length 540.5 Brake Type Post Mount 180 Color Shiny Orange Crown Race 40 Defined Color Orange External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search FOX Model Year 26 , FOX MY26 Lockout Switch Remote Maximum Tire Width 63.5 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Type Tapered Travel (mm) 120 Wheel Size 29" FOX 34 SL Factory Suspension Fork Suspension Fork UPC: 821973504179

by FOX

—$679

XC courses are more technical than ever with the latest longer-travel XC bikes more than capable. With a stout full-width stance, increased travel and tire clearance and svelte sub-1500g weight, the new 34 SL Performance suspension fork is built to exceed the demands of modern XC and downcountry. Proven and reliable GRIP damper features a 3-position lever for easy set up and firm mode for pedaling efficiency Air spring top cap uses cassette tool for easy volume adjustments Full-width 34mm chassis with aggressive generative design-aided arch and crown for 17% increase in stiffness and 10mm increase in travel over 34 SC, at only 3% weight increase 20mm increased bushing overlap for reduced friction and greater stiffness with no increase in axle-to-crown length (compared to 34 SC) Longer air spring than 34 SC with larger negative volume mirrors 34 LT s supple initial stroke and 34 SC s supportive mid and end stroke Double-butted damper side stanchion for weight savings Lower Leg Bypass Channels relocated 90 inboard for improved bushing loading and reduced dynamic friction Item Specifications Axle to Crown Length 540.5 Brake Type Post Mount 180 Color Matte Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search FOX Model Year 26 , FOX MY26 Lockout Switch Crown Maximum Tire Width 63.5 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Type Tapered Travel (mm) 120 Wheel Size 29" FOX 34 SL Performance Suspension Fork Suspension Fork UPC: 821973504247

by FOX

—$1,049

XC courses are more technical than ever with the latest longer-travel XC bikes more than capable. With a stout full-width stance, increased travel and tire clearance and svelte sub-1500g weight, the new 34 SL Performance Elite suspension fork is built to exceed the demands of modern XC and downcountry. Features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class Three on-the-fly compression damping positions: Open, Medium, Firm Air spring top cap uses cassette tool for easy volume adjustments Full-width 34mm chassis with aggressive generative design-aided arch and crown for 17% increase in stiffness and 10mm increase in travel over 34 SC, at only 3% weight increase 20mm increased bushing overlap for reduced friction and greater stiffness with no increase in axle-to-crown length (compared to 34 SC) Longer air spring than 34 SC with larger negative volume mirrors 34 LT s supple initial stroke and 34 SC s supportive mid and end stroke Double-butted damper side stanchion for weight savings Lower Leg Bypass Channels relocated 90 inboard for improved bushing loading and reduced dynamic friction Item Specifications Axle to Crown Length 540.5 Brake Type Post Mount 180 Color Matte Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search FOX Model Year 26 , FOX MY26 Lockout Switch Crown Maximum Tire Width 63.5 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Type Tapered Travel (mm) 120 Wheel Size 29" FOX 34 SL Performance Elite Suspension Fork Suspension Fork UPC: 821973504278

by FOX

—$365

**THIS FITS ROCKSHOX LYRIK/YARI WITH A 55LBS/IN SPRING RATE** Presenting the Smashpot - a fork coil spring conversion system for singlecrown enduro forks, featuring externally adjustable hydraulic anti-bottoming technology to deliver precisely the amount of bottoming resistance you need. What's new for Smashpot V2 vs V1? 140-200mm travel (fork max travel permitting) vs 130-180mm Low-profile external hydraulic bottom out (HBO) adjustment Larger topout spring for silent engagement on big pulls Dual crown compatible - bringing coil back to downhill Dual-rate progressive springs for 180-200mm travels Wider range of external HBO adjustment Features: Full tool-free control over bottoming resistance. **11 coil spring rates available, from 30lbs/in to 80lbs/in precision wound in 5lbs/in increments. See image to calculate spring size. Rider weights from 45kg (100lbs) to 125kg (275lbs) catered for. Universal cartridge kits require only new top caps to be moved between different forks (and foot studs if different fork brands). Springs are guided and isolated internally and externally to reduce spring buckling and knocking, minimising noise. Spring guiding system also means less rubbing, less wear and less contamination of the bath oil. Utilises more oil for superior bushing lubrication and smoothness. Only coil conversion system on the market allowing 180mm travel. Easy and cost-effective to transfer from one fork to another. Allows full use of travel even for very light riders No harsh bottoming. Reliable and low maintenance. User installable and serviceable. Designed, developed and manufactured in Whistler, Canada. Weight increase of approximately 250-450g (dependent on spring rate and fork's existing spring system). System includes one universal Smashpot cartridge kit with brand-specific food stud, fork-specific topcap and spring. Our engineering is straightforward and no-BS, so we think our marketing should be too: if your first priority for your fork is outright performance, get yourself a Smashpot. Why Coil? Air springs have improved substantially over the years - and we've been at the forefront of air spring development for years, so we've got no bridges to sell you. Yeah, coils are heavier than air, and for some riders that alone is a dealbreaker - fair enough. The advantages of coil springs, however, are clear: Zero stiction or friction in a coil spring. And there never will be. Zero spring rate variation. Zero moving seals in the spring system to wear out, cause friction or leak. Zero temperature effect on spring rate. Zero altitude sensitivity. More oil in the fork - lubrication and service life are improved. Day in, day out, the fork just straight up feels good. In short, improvements in sensitivity, grip, compliance, mid-stroke support and consistency, with reductions in harshness and hand pain. Low weight aside, air springs outperform coil springs in one critical area: bottoming resistance. Enter the Smashpot. Externally adjustable, speed sensitive hydraulic bottoming control valve The heart of the Smashpot is a speed sensitive shimmed valve which engages progressively and seamlessly in the last 50mm of travel to effectively manage high energy and low energy inputs without harshness. Easy tool-free external adjustment ensures you get as much or as little bottoming resistance as you need. Light and smooth? Easy. Big and aggressive? Just as easy. Turn a dial and you're sorted. Why go this route? Unlike conventional hydraulic anti-bottoming cones, the longer displacement over which it is effective and its speed-sensitive shimmed valve means the Smashpot can dissipate more energy with lower forces, bringing the fork to a gentle stop at the end of the travel in a smooth, controlled manner. Compared to alternatives such as elastomer or pneumatic bump stops, the Smashpot doesn't involve components physically colliding mid-travel. And unlike air springs and pneumatic bump stops, it dissipates energy rather than storing it and throwing it back at you, further stabilising the bike. There's no air spring seals, meaning fewer potential points of failure in your fork, no spring stiction, fewer wearing seals, and no need for a shock pump - ever. FAQ How much weight does it add? It's heavier than your air spring by between 250-450g, depending on spring rate (firmer springs are generally heavier) and the fork's original spring system (TALAS/DPA are typically heavier than Float/Solo Air). If the weight bothers you, you may be more interested in a Luftkappe. Can I convert my fork back to air afterwards? Going back to air, should you wish to, may not be an option - spring rub may score the inside of your stanchion, so the the piston may not seal again. The spring is both isolated and guided to minimise stanchion knock and rub, however there are no guarantees an air spring will seal again after riding with a spring installed. We'd be pretty surprised if anyone actually wanted to do this after riding the Smashpot though. Do I need any extra parts to change the travel? All spacers required are included with the kit. The only thing you may want is more heat shrink for the cartridge tube, as it's installed after travel is set internally. Does it void the fork's warranty? As with any aftermarket modifications, it should be expected to void the fork manufacturer's warranty. What versions of the Pike does it fit? It is available for all 35mm Pikes in 27.5" and 29" from MY2014 onwards (no fitment for 26") in Boost and non-Boost. 29" forks need to use the included adaptor to lengthen the top cap. What versions of the Revelation does it fit? It fits all 35mm versions of the Revelation from MY2018 onwards. What versions of the Lyrik/Yari does it fit? It fits all versions of the Lyrik & Yari from MY2016 onwards. What versions of the Fox 36 does it fit? It fits all versions of the 36 from MY2015 onwards EXCEPT Pedelec e-bike specific forks. IMPORTANT: Call Fox with your serial number to check your fork's maximum permissible travel if attempting to run your fork with the Smashpot over 160mm if this is more travel than it currently has. Will it fit any other forks? Other applications are under development. Fitment notes: Not currently compatible with Fox 36 Pedelec (e-bike specific) forks. Not currently compatible with any 26" forks. Not currently compatible with any 34mm stanchion forks. No compatibility with any 32mm forks. Fork maximum travel is set by the manufacturer. DO NOT configure the Smashpot to exceed manufacturer-specified max travel. If in doubt, call the original fork manufacturer to determine maximum permissible travel. Typical fork maximum permissible travels: Rockshox: Lyrik/Yari 27.5"/29" - 180mm Pike/Revelation 27.5/29" - 160mm Fox: 36 Float/Talas 27.5" - 180mm OR 160mm - call Fox with your serial number to check max travel prior to setting Smashpot to more than 160mm travel. 36 Float/Talas 29" - 170mm OR 160mm - call Fox with your serial number to check max travel prior to setting Smashpot to more than 160mm travel. Vorsprung Smashpot Damper, Compression

by Vorsprung

—$37

Seal kits for Fox suspension repair and rebuild. FOX Seal Kit Seal Kit UPC: 821973364056

by FOX

—$16.77

FOX Suspension Fork Parts for service and repair of FOX suspension forks. FOX FOX Suspension Fork Parts Thru Axle UPC: 821973455952

by FOX

—$341

FOX 34 Step-Cast Crown/Steerer/Uppertube Assembies for service and repair. FOX 34 Step-Cast Crown/Steerer/Uppertube Assemblies Crown/Steerer/Uppertube Assembly UPC: 821973420929

by FOX

—$39.50

Thru-axles engineered for a better ride! Designed and tested in the rugged conditions of Colorado, these thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look. A unique captive rotating thru-axle washer reduces friction on dropouts during installation, allowing for a precise fit and prevents damage when torquing. Whether you are looking to upgrade or replace an existing factory axle, these thru-axles will fit a wide variety of bike and fork models. Designed, machined and tested in Colorado, USA 5mm hex on both ends of the axle for easy installation and removal 7075 aluminum with hard anodized finish for extra durability Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage Axle length is compatible +/- 2mm An ideal replacement for OEM thru-axles Item Specifications Axle Diameter (mm) 12 Color Black Length 166 Overall Length (mm) 166 Rear Axle Type 12mm Thru-axle Thread Length (mm) 18 Thread Pitch 1 Wheels Manufacturing Rear Thru Axle Thru Axle UPC: 811079029423

by Wheels Manufacturing

—$39.50

Thru-axles engineered for a better ride! Designed and tested in the rugged conditions of Colorado, these thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look. A unique captive rotating thru-axle washer reduces friction on dropouts during installation, allowing for a precise fit and prevents damage when torquing. Whether you are looking to upgrade or replace an existing factory axle, these thru-axles will fit a wide variety of bike and fork models. Designed, machined and tested in Colorado, USA 5mm hex on both ends of the axle for easy installation and removal 7075 aluminum with hard anodized finish for extra durability Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage Axle length is compatible +/- 2mm An ideal replacement for OEM thru-axles Item Specifications Axle Diameter (mm) 15 Color Black Front Axle Type 15mm Thru Axle Length 158 Overall Length (mm) 158 Thread Length (mm) 9 Thread Pitch 1.5 Wheels Manufacturing Front Thru Axle Thru Axle UPC: 811079029492

by Wheels Manufacturing

—$39.50

Thru-axles engineered for a better ride! Designed and tested in the rugged conditions of Colorado, these thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look. A unique captive rotating thru-axle washer reduces friction on dropouts during installation, allowing for a precise fit and prevents damage when torquing. Whether you are looking to upgrade or replace an existing factory axle, these thru-axles will fit a wide variety of bike and fork models. Designed, machined and tested in Colorado, USA 5mm hex on both ends of the axle for easy installation and removal 7075 aluminum with hard anodized finish for extra durability Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage Axle length is compatible +/- 2mm An ideal replacement for OEM thru-axles Item Specifications Axle Diameter (mm) 12 Color Black Length 172 Overall Length (mm) 172 Rear Axle Type 12mm Thru-axle Thread Length (mm) 16 Thread Pitch 1.75 Wheels Manufacturing Rear Thru Axle Thru Axle UPC: 810124711016

by Wheels Manufacturing

—$104

The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. This upgrade is for those who have 2023+ ZEB, Lyrik and Pike Select+ or Select models, or pre-2023 model Zeb forks. By focusing on refining the shape of the spring curve, RockShox created an air spring that’s more plush off-the-top, with a supremely supportive mid-stroke and improved end-stroke ramp up. They zeroed in on details to improve small bump absorption to be extremely reactive over every inch of trail and added mid-stroke support allowing the fork to sit higher in travel and utilize every millimeter of travel. The new DebonAir+ offers a supreme ride feel and consistency you can trust. Buttercups Little gold-packaged rubber pucks live at the end of the damper and air spring shafts and fit into the lower leg of the fork. Similar technology is found in off-road vehicles, chainsaws, and most devices that transfer high-frequency vibrations into the hands and arms of the user. Like a rubber mount on the handle of the chainsaw, ButterCups measurably eliminate trail chatter by on average 20%. Proven by data acquisition over thousands of trail miles and confirmed by riders. Featured in all Ultimate models and upgrade-able in the full line up of new Pike, Lyrik, and ZEBs. RockShox DebonAir+ Air Spring Assembly Upgrade Air Springs & Parts UPC: 710845895432

by RockShox

—$113

Fits: Lyrik (All Models and Years with Mission Control FR or DH compression dampers) Will not work with Motion Control IS compression damper equipped Lyrik without changing to a Mission Control FR or DH at the same time Includes rebound adjuster knob Item Specifications Fits Lyrik RockShox Motion Control Rebound Damper Damper, Rebound UPC: 710845624155

by RockShox

—$85

OneLoc Remote Upgrade Kit Upgrade from crown adjust to remote adjust Includes OneLoc remote lever and compression damper RockShox OneLoc Remote Upgrade Kits UPC: 710845828553

by RockShox

—$80

PUSH ultra-light fork springs are precision engineered and CNC wound for exacting rate tolerance. Different spring rates are available in 5 lb/in increments, ensuring you get the exact rate you need without compromise. Fits 140-170mm Travel 2016-Current RockShox Yari and Lyrik 30 lb/in Spring Weight, Red Includes Fork spring, Preload Cap and Preload Spacers (2) PUSH Industries ACS3 Spring Assembly RockShox Coil Springs & Parts UPC: 840031601223

by PUSH Industries

—$10.75

Volume Spacer tuning kits for FOX suspension fork service and repairs. FOX Volume Spacers Air Springs & Parts UPC: 611056191231

by FOX