Forks / Parts

—$395

RockShox 35mm Crown/Steerer/Uppertube Assemblies RockShox 35mm Crown/Steerer/Upper Tube Assembly Crown/Steerer/Uppertube Assembly UPC: 710845769696

by RockShox

—$135

Make a good fork a great fork. Introducing the Luftkappe air piston kit for Fox Float forks. The Luftkappe is available for: 34 Float NA2 (2016-17) Performance & Factory Series (130mm + only - 120mm and lower need the 2018 Evol air shaft before a Luftkappe can be fitted) 34 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA (2015-17) Performance & Factory Series (max 180mm travel, min 120mm travel) Pinkbike: "The Luftkappe's change to the feel of the Lyrik was immediately noticeable on the trail. Traction was increased across chatter and the fork remained higher in its travel and more stable, improving the dynamic ride height without sacrificing the top end. My confidence soared when hitting sections with a lot of chatter and mid to large-sized hits, and the result meant more comfort and speed through such sections." Taking everything we learned with the Corset air sleeves and the Luftkappe we developed for the Pike, Yari & Lyrik, this second generation Luftkappe is a new air piston assembly for Fox's 34 NA2/Evol and 36 Evol forks. User installable and simple to set up, the Luftkappe transforms a good fork into a great fork. Softer initial stroke Larger negative air chamber Increased sag without the associated diving Coil-like initial & mid-stroke spring rate without excessive bottoming Increased sensitivity Improved mid stroke support & control Superior bump compliance and traction Reduced hand fatigue Reduces required compression damping Retains volume spacer compatibility Optional tools available for self-install What's included in the kit: 34 Evol: Upgrade low friction air piston assembly. 34 NA2: Upgrade low friction air piston assembly & upgrade low friction, low profile sealhead 36 Evol: Upgrade low friction air piston assembly. 36 NA: Upgrade low friction air piston assembly & upgrade topout spacer ring Note: If your 36 Evol tops out noticeably, you will need to replace your air shaft assembly before purchasing the Luftkappe. Fox have updated this part due to the topout issues that many of the 2018 36 Evol forks had. 34 forks do not have this issue. Relevant Fox part numbers for the new air shaft assemblies, by travel: 180mm: 820-02-534-KIT 170mm: 820-02-535-KIT 160mm: 820-02-536-KIT 150mm: 820-02-537-KIT 140mm: 820-02-538-KIT 100mm (36 831): 820-02-539-KIT If your fork does not have noticeable top-out issues, you don't need to replace the shaft before installing the Luftkappe. FAQ: 1. Can I install it myself? Yes, provided you have access to the supplies and tools listed in the installation instructions above. If you're really crafty (and EXTREMELY careful) it is possible to install the Luftkappes (all Evol variants) without the installation tools, however the risk of damaging things is much higher and we really don't recommend trying. If you choose to take this route and damage your air shaft (or anything else), we cannot be held responsible - we make the tools available for a reason. It is not possible to install the 34 NA2 Luftkappe kit without 10mm shaft clamps and the bullet tool - you'll damage the shaft AND damage the seals on the new sealhead. 2. Does it work with TALAS forks? No, sorry. 3. Does it work with versions of the 36 prior to 2015? No, sorry! 4. Does it work with 32s or 40s? No, sorry. 5. How does it actually work? It enlarges the negative air chamber to reduce the initial spring rate. This lets you run higher air pressure for more support in the middle and end of the stroke with improved sensitivity in the start of the stroke. 6. Is it compatible with MRP's Ramp Control cartridge? Generally speaking no. If you are running your fork at least 30mm shorter than its maximum available travel, then yes. 7. Shouldn't I just buy a new fork instead? Sure, they're about the same price as the Luftkappe. 8. What parts does it actually replace in the air spring? It replaces the plastic piston itself, and the rubber topout bumper in the 34s is removed but not replaced (36 topout assembly is unchanged). You reuse your air shaft, though the 34NA2 kit comes with a replacement low friction, low profile sealhead comparable in size to the stock 2018 Evol sealhead. This is also why the NA2 kit is more expensive than the other two - it's basically a 2018 Factory update on top of a Luftkappe. 9. Who is this NOT suited for? The Luftkappe is outright superior to the stock air spring for nearly everyone, however there are a few cases where it might not be for you: - If you run your 36 at 180mm, it will be quite progressive. You may like it, but you may also find it hard to use the last 5-10mm of travel - if this would bother you then have a think about it first. At 170mm and below it will be fine. - If you like running really low sag for some reason. The Luftkappe runs more sag than the stock fork, but is firmer in the mid stroke - similar to a coil fork, but with ending-stroke ramp up to prevent harsh bottoming. If you're the kind of person who wants the fork to run 5% sag, this isn't for you. We could point out that a setup like that probably just means your handlebars are set too low and you're compensating with oversprung suspension, but we aren't here to judge you, so maybe just don't buy it. - If you're anal about your fork having an exact (but rounded-to-the-nearest-10mm) amount of travel. Because the Luftkappe balances forces at a pneumatic topout, the force right around topout is very low (literally zero other than friction), meaning the weight of the bike alone will cause it to sag a few millimetres. Your car's suspension sags under the vehicle's own weight, so should your bike - unless it was so sticky, overly stiff or over-preloaded that 10kg of bike weight wasn't enough to cause your suspension to move at all, of course. If only having an apparent 148mm out of a 150mm fork is a big deal for you, stick with the stock fork. (in)Compatibility Information: Luftkappe IS available for: 34 Float NA2 (Performance, Performance Elite and Factory Series, 2016-17), 130mm and higher travel 34 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA1 (NA) Not compatible with: Rhythm-series forks E-bike specific forks Non-Evol (pre-2018) 36 forks 34mm forks for 29" wheels with 150mm or more travel Pre-2016 34 forks Pre-2016 34 forks that were later updated with the factory NA air system update Any TALAS forks Any 32mm forks Any 40mm forks Vorsprung Luftkappe Air Springs & Parts

by Vorsprung

—$130

Make a good fork a great fork. Introducing the Luftkappe air piston kit for Fox Float forks. The Luftkappe is available for: 34 Float NA2 (2016-17) Performance & Factory Series (130mm + only - 120mm and lower need the 2018 Evol air shaft before a Luftkappe can be fitted) 34 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA (2015-17) Performance & Factory Series (max 180mm travel, min 120mm travel) Pinkbike: "The Luftkappe's change to the feel of the Lyrik was immediately noticeable on the trail. Traction was increased across chatter and the fork remained higher in its travel and more stable, improving the dynamic ride height without sacrificing the top end. My confidence soared when hitting sections with a lot of chatter and mid to large-sized hits, and the result meant more comfort and speed through such sections." Taking everything we learned with the Corset air sleeves and the Luftkappe we developed for the Pike, Yari & Lyrik, this second generation Luftkappe is a new air piston assembly for Fox's 34 NA2/Evol and 36 Evol forks. User installable and simple to set up, the Luftkappe transforms a good fork into a great fork. Softer initial stroke Larger negative air chamber Increased sag without the associated diving Coil-like initial & mid-stroke spring rate without excessive bottoming Increased sensitivity Improved mid stroke support & control Superior bump compliance and traction Reduced hand fatigue Reduces required compression damping Retains volume spacer compatibility Optional tools available for self-install What's included in the kit: 34 Evol: Upgrade low friction air piston assembly. 34 NA2: Upgrade low friction air piston assembly & upgrade low friction, low profile sealhead 36 Evol: Upgrade low friction air piston assembly. 36 NA: Upgrade low friction air piston assembly & upgrade topout spacer ring Note: If your 36 Evol tops out noticeably, you will need to replace your air shaft assembly before purchasing the Luftkappe. Fox have updated this part due to the topout issues that many of the 2018 36 Evol forks had. 34 forks do not have this issue. Relevant Fox part numbers for the new air shaft assemblies, by travel: 180mm: 820-02-534-KIT 170mm: 820-02-535-KIT 160mm: 820-02-536-KIT 150mm: 820-02-537-KIT 140mm: 820-02-538-KIT 100mm (36 831): 820-02-539-KIT If your fork does not have noticeable top-out issues, you don't need to replace the shaft before installing the Luftkappe. FAQ: 1. Can I install it myself? Yes, provided you have access to the supplies and tools listed in the installation instructions above. If you're really crafty (and EXTREMELY careful) it is possible to install the Luftkappes (all Evol variants) without the installation tools, however the risk of damaging things is much higher and we really don't recommend trying. If you choose to take this route and damage your air shaft (or anything else), we cannot be held responsible - we make the tools available for a reason. It is not possible to install the 34 NA2 Luftkappe kit without 10mm shaft clamps and the bullet tool - you'll damage the shaft AND damage the seals on the new sealhead. 2. Does it work with TALAS forks? No, sorry. 3. Does it work with versions of the 36 prior to 2015? No, sorry! 4. Does it work with 32s or 40s? No, sorry. 5. How does it actually work? It enlarges the negative air chamber to reduce the initial spring rate. This lets you run higher air pressure for more support in the middle and end of the stroke with improved sensitivity in the start of the stroke. 6. Is it compatible with MRP's Ramp Control cartridge? Generally speaking no. If you are running your fork at least 30mm shorter than its maximum available travel, then yes. 7. Shouldn't I just buy a new fork instead? Sure, they're about the same price as the Luftkappe. 8. What parts does it actually replace in the air spring? It replaces the plastic piston itself, and the rubber topout bumper in the 34s is removed but not replaced (36 topout assembly is unchanged). You reuse your air shaft, though the 34NA2 kit comes with a replacement low friction, low profile sealhead comparable in size to the stock 2018 Evol sealhead. This is also why the NA2 kit is more expensive than the other two - it's basically a 2018 Factory update on top of a Luftkappe. 9. Who is this NOT suited for? The Luftkappe is outright superior to the stock air spring for nearly everyone, however there are a few cases where it might not be for you: - If you run your 36 at 180mm, it will be quite progressive. You may like it, but you may also find it hard to use the last 5-10mm of travel - if this would bother you then have a think about it first. At 170mm and below it will be fine. - If you like running really low sag for some reason. The Luftkappe runs more sag than the stock fork, but is firmer in the mid stroke - similar to a coil fork, but with ending-stroke ramp up to prevent harsh bottoming. If you're the kind of person who wants the fork to run 5% sag, this isn't for you. We could point out that a setup like that probably just means your handlebars are set too low and you're compensating with oversprung suspension, but we aren't here to judge you, so maybe just don't buy it. - If you're anal about your fork having an exact (but rounded-to-the-nearest-10mm) amount of travel. Because the Luftkappe balances forces at a pneumatic topout, the force right around topout is very low (literally zero other than friction), meaning the weight of the bike alone will cause it to sag a few millimetres. Your car's suspension sags under the vehicle's own weight, so should your bike - unless it was so sticky, overly stiff or over-preloaded that 10kg of bike weight wasn't enough to cause your suspension to move at all, of course. If only having an apparent 148mm out of a 150mm fork is a big deal for you, stick with the stock fork. (in)Compatibility Information: Luftkappe IS available for: 34 Float NA2 (Performance, Performance Elite and Factory Series, 2016-17), 130mm and higher travel 34 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA1 (NA) Not compatible with: Rhythm-series forks E-bike specific forks Non-Evol (pre-2018) 36 forks 34mm forks for 29" wheels with 150mm or more travel Pre-2016 34 forks Pre-2016 34 forks that were later updated with the factory NA air system update Any TALAS forks Any 32mm forks Any 40mm forks Vorsprung Luftkappe Air Springs & Parts

by Vorsprung

—$325

Transform your existing RockShox Pike, Lyrik or Yari suspension fork into the ultimate trail fork. The ACS3 coil conversion kit combines small bump sensitivity, traction, and mid stroke support of a coil with the big hit performance of an air spring. By using coil springs, you can eliminate the constant maintenance required to keep your fork running optimally! Fits 2014-2017 RockShox Boost 27.5 Pike/2018-Current 27.5 and 29 Pike Includes Air Bump Stop, Spring Assembly, Lower Plunger Rod, retaining ring and travel indicator adapter Reduced friction for smoother overall fork performance Air Bump Stop cartridge technology to control the bigger hits towards the end of the travel PUSH Industries ACS3 Coil Component Kit RockShox Coil Springs & Parts UPC: 840031600103

by PUSH Industries

—$27

Top Caps for Fox suspension fork service and repair. FOX Top Caps Adjuster Knob & External Hardware UPC: 611056146941

by FOX

—$50

RockShox Seal Head Assemblies RockShox Fork Seal Head Air Springs & Parts UPC: 710845862922

by RockShox

—$166

32 Grip Damper Assembly for FOX suspension fork service and repair. FOX 32 Grip Damper Damper, Compression UPC: 611056149157

by FOX

—$429

FOX 36 Crown/Steerer/Uppertube Assembies for service and repair. FOX 36 Crown/Steerer/Uppertube Assemblies Crown/Steerer/Uppertube Assembly UPC: 821973456058

by FOX

—$245

RockShox 35mm Crown/Steerer/Uppertube Assemblies RockShox 35mm Crown/Steerer/Upper Tube Assembly Crown/Steerer/Uppertube Assembly UPC: 710845838385

by RockShox

—$45

Rudy XPLR Debonair shaft for repair and maintenance of Rockshox suspension. RockShox Rudy XPLR Debonair Shaft Air Springs & Parts UPC: 710845871757

by RockShox

—$639

The RockShox Domain platform goes bigger than ever with the updated Domain Gold RC. Taking cues from ZEB, RockShox's decorated enduro fork, Domain combines value and performance. The new Isolator damper is the highlight of this fork, with a unique three-position solution that maximizes oil flow management across the full compression range. A burly 38mm chassis, top-of-the-line Maxima Plush Dynamic Suspension Lube, and RockShox's trusted DebonAir air spring round out Domain's rugged package Isolator RC damper features a three-position Compression adjustment (Open, Pedal, and Firm) with externally-adjustable Rebound providing superior traction, control, and confidence for the rider 38mm chassis for increased stiffness, perfect for mountain bikes and E-MTBs alike Highly tunable DebonAir air spring sits higher in the travel making the most of Domain s travel and offers a smooth, consistent, coil-like feel throughout the stroke Highly tunable and Bottomless Token ready Short fender compatible (RockShox short fender included) Maxima Plush damping fluid reduces friction and quiets rebound damper noise Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride Item Specifications Axle to Crown Length 576 Brake Type Post Mount 200 Color Gloss Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search RockShox Model Year 25 keyword search RockShox MY25 Lockout Switch None Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Tapered Travel (mm) 160 Wheel Size 29" RockShox Domain Gold Isolator RC3 Suspension Fork Suspension Fork UPC: 710845904073

by RockShox

—$929

Gravel riders who want to get wild choose the RockShox Rudy XPLR. It's efficient for days of triple-digit mileage while delivering control and comfort when things get rough. Rudy rides on the superlight Charger Race Day 2 damper with 2-position Compression adjustment: Open and a rock-solid, sprint-ready Lock. Rudy offers precise steering with its 30mm chassis and compatibility for full or short fenders. Gravel riding keeps evolving-isn't it time to ride a fork that's on the cutting edge? Charger Race Day 2 Damper every detail perfected, every extra ounce shaved away, is RockShox's lightest performance-driven damper and features 2 Compression positions: Open or a rock-solid Lock Solo Air spring is specifically tuned for short travel Machined and anodized aluminum crown is exceptionally lightweight and durable Maxima Plush Dynamic Lower Leg Lube reduces friction and enhances fork performance ride after ride 3-bolt mounts to fit a short fender (RockShox fender included) Full fender compatibility using custom stealth stay bosses (sold separately) Maxima Plush damping fluid reduces friction and silences damper noise Fits up to 700x50 tires Item Specifications Axle to Crown Length 435 Brake Type Flat Mount Color Gloss Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 12mm Thru x 100mm keyword search RockShox Model Year 25 keyword search RockShox MY25 Lockout Switch Crown Maximum Tire Width 50 Negative Spring Air Offset 45 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 30 Steerer Type Tapered Travel (mm) 40 Wheel Size 700c RockShox RUDY Ultimate XPLR Race Day 2 Suspension Fork Suspension Fork UPC: 710845904097

by RockShox

—$1,199.99

Invert smoothes your ride and gives unbelievable control of your bike on rough roads, loose turns, and steep descents. It's surprisingly lightweight, easy to use, and strikingly attractive. Riding beyond the pavement can be rough, physically taxing, and unpredictable. Invert goes straight to the source of this problem to offer a smoother ride with more traction, both uphill and down. With Invert, you'll be more efficient, more relaxed, and have confidence to glide over gravel like you've never experienced before. Inverted design promotes smoothest possible operation, lightest weight, & cleanest visual integration by using a layout opposite to conventional suspension forks Features Climb Switch that engages a firm setting for out of the saddle pedaling Gravel-Specific tuned, progressive air spring balances traction with the right amount of support and is fully adjustable for rider weight (Max Weight: 250 lb / Max PSI: 250 psi) Premium carbon fiber crown and steerer is bonded to aluminum upper tubes to provide an incredibly strong and lightweight fork (1113 g) Flat-Mount disc for 160mm rotor (Mounting bolts included) Integrated 36 degree angle crown race Included with fork: Ancora Premium Expansion Plug, 52mm ZN40 headset bearing, Brake caliper mounting bolts, and Thru-Axle Hand-built in Fletcher, NC Item Specifications Axle to Crown Length 435 Brake Type Flat Mount Color Matte Black Crown Race 40 Crown Race Integrated Defined Color Black Front Axle 12mm Thru x 100mm Lockout Switch Climb Switch Maximum Tire Width 50 Negative Spring Air Offset 45 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 30 Steerer Tube Length (mm) 300 Steerer Type Tapered Travel (mm) 40 Weight 1113 Wheel Size 700c Cane Creek Invert Gravel Suspension Fork Suspension Fork UPC: 840226007540

by Cane Creek

—$1,149

Ultra-versatile, super capable, lightweight on the scales, heavy on the attitude-this is RockShox Pike. Not afraid of the rooty chutes. Unintimidated by the calf-crushing climbs. RockShox has updated their trail-capable legend with the new Charger 3.1 RC2 damper. Along with vibration-crushing ButterCups, this damper offers better traction, comfort, and control. With more tunable range, Charger 3.1 enables riders to set up the perfect suspension action for their preferences. A fork designed to level up your trail game. Experience the legend. Charger 3.1 is the evolution of SRAM's proven damper platform that offers increased damping range, High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments for a smoother ride Charger 3.1 RC2 s adjustment range is broader with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day ButterCups block 20% of high-frequency vibrations and massively reduces hand and arm fatigue DebonAir+ air spring is built to provide a balance of a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride Lightweight machined and anodized crown for premium looks and durability Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel Item Specifications Axle to Crown Length 532 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search RockShox Model Year 25 keyword search RockShox MY25 Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 245 Steerer Type Tapered Travel (mm) 140 Wheel Size 27.5" RockShox Pike Ultimate Charger 3.1 RC2 Suspension Fork Suspension Fork UPC: 710845904325

by RockShox

—$599

The RockShox Psylo 35mm platform delivers premium performance with the new flow-focused Isolator RC three-position damper, tunable DebonAir air spring, and Maxima Plush Dynamic Suspension Lube to keeps things running smooth. Psylo combines value and performance to bring capability and reliability to each and every ride. Isolator RC damper features a three-position compression adjustment (Open, Pedal, and Firm) with externally-adjustable Rebound providing superior traction, control, and confidence for the rider 35mm aluminum upper tube platform for functional stiffness and enhanced steering precision Premium bushings offer lower breakaway force and elevate this platform to feel silky smooth in rough terrain Highly tunable DebonAir air spring sits higher in the travel making the most of Psylo s travel and offers a smooth, consistent, coil-like feel throughout the stroke Highly tunable and Bottomless Token ready Short fender compatible (RockShox short fender included) Maxima Plush damping fluid reduces friction and quiets damper noise Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride Item Specifications Axle to Crown Length 551 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search RockShox Model Year 25 keyword search RockShox MY25 Lockout Switch None Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Type Tapered Travel (mm) 140 Wheel Size 29" RockShox Psylo Gold Isolator RC Suspension Fork Suspension Fork UPC: 710845906862

by RockShox

—$869

Built with a stiff, lightweight 35mm chassis and Charger RL damper, SID Select has what it takes to compete, proven by our racers' results. 3P damper features three compression positions: Open, Pedal, or a rock-solid Lock 35mm chassis is the perfect blend of light weight and rigidity for the modern XC bike Charger RL damper revamped with podium proven performance DebonAir+ provides more small-bump sensitivity and tunable mid-stroke support Bushing Package maximizes the fork s bushing overlap, reducing friction and creates the smoothest ride possible Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride Item Specifications Axle to Crown Length 531 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments Lockout Threshold External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 230 Steerer Type Tapered Travel (mm) 120 Wheel Size 29" RockShox SID Select Charger RL Suspension Fork Suspension Fork UPC: 710845894305

by RockShox

—$869

Poppy, playful, and singletrack minded, the new Pike Select Charger RC is equipped with an all-new 35mm chassis paired with the Charger RC damper. Matched with the new DebonAir+ air spring and new premium fender compatibility. It's time to fall in love with Pike, all over again. 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible Charger RC damper featuring Low Speed Compression adjust DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep Compatible with new Pressure Relief Valves. Eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. With the press of a button or two, Pressure Relief Valves restore premium fork feel. Pressure Relief Valve upgrade kits available Maxima Plush Dynamic Suspension Lube reduces friction and enhances fork performance ride after ride, and Maxima Plush damping fluid reduces friction and silences damper noise Bolt-in torque cap adapters now included for the use with standard hub end caps Item Specifications Axle to Crown Length 531 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 245 Steerer Type Tapered Travel (mm) 120 Wheel Size 29" RockShox Pike Select Charger RC Suspension Fork Suspension Fork UPC: 710845864223

by RockShox

—$579

As the new enduro bikes are getting bigger and bigger, that comes with more demand than ever. The new  RockShox Domain takes cues from ZEB, our enduro specialist fork with serious credentials. Domain offers a new burly 38mm chassis, short fender compatibility, and a confidence-inspiring DebonAir air spring matched with a reliable Motion Control RC damper. We even brought the performance of Maxima Plush damping fluid along for the ride. If you are looking for the most performance to value ratio in any fork on the market, the Domain checks our boxes. FEATURES 38mm chassis for increased stiffness and rider confidence Motion Control RC damper featuring Low Speed Compression adjust with externally adjustable dual flow rebound Highly-tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain Maxima Plush damping fluid reduces friction and quiets damper noise Short fender compatible (RockShox fender sold separately) Fits tires up to 2.8" without fenders - use of a short fender may reduce tire clearance RockShox Domain RC Suspension Fork Suspension Fork UPC: 710845860386

by RockShox

—$529

Premium performance at down-to-earth prices. With axle and steerer options to match any spec, aluminum upper tubes, and Motion Control damping, Judy is a great option for MTB and eMTB bikes alike. Highly tunable Solo Air air spring Motion Control damping featuring Low Speed Compression adjustment to lockout Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look Item Specifications Axle to Crown Length 530 Brake Type Post Mount 160 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments Lockout Threshold External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Handlebar - Cable Maximum Tire Width 81 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 30 Steerer Tube Length (mm) 265 Steerer Type Tapered Travel (mm) 120 Weight 2013 Wheel Size 29" RockShox Judy Gold RL Suspension Fork Suspension Fork UPC: 710845844843

by RockShox

—$625

Road Fork 32mm tire clearance Internal hose routing 12mm Thru-Axle Flat mount disc brake compatible Single piece molded fork provides strength and is lightweight Item Specifications Axle to Crown Length 370 Brake Mount (Fork) Flat Mount 140 Color Black Crown Race 33 Defined Color Black Front Axle 12mm Thru x 100mm Material Carbon Maximum Tire Clearance (Fork) 32mm Offset 50 Steerer Tube Length (mm) 350 Steerer Type Tapered Weight 425 Wheel Size 700c ENVE Composites Road Road Fork UPC: 815885025020

by ENVE Composites

—$235

Easily change your Ohlins RXF38 m.3 suspension fork travel by simply unthreading the footnut on the bottom, and using a cassette lockring tool, unthread the top cap which will pull the entire cartridge out of the fork. Replace with another cartridge, and the change is complete. Includes an entire air spring cartridge set to 140mm of travel Allows for easy and quick travel change Maximum stroke on RXF36 m.3 is 160mm for 29" wheel, and 170mm for 27.5" wheel version Ohlins RXF36 m.3 Suspension Fork Air Spring Cartridge Air Springs & Parts UPC: 840153640063

by Ohlins

—$1,350

Unleash the next level of racing performance with the latest innovation in Ohlins front suspension - the RXC34 m.1 XC fork. Equipped with their race-proven floating axle design, the RXC34 m.1 features a chassis with a stiff yet lightweight aluminum crown construction, providing precise steering and predictable performance. The RXC34 m.1 incorporates an all-new damper and updated air spring to further enhance speed and control on technical cross-country tracks. As part of the hlins XC suspension system, the RXC34 m.1 boasts a rider-friendly system to adjust air spring progressiveness and stroke. And with their race proven setting bank, you'll be able to fine-tune the fork to your unique riding style and bike linkage. Uses the new XC-optimized OTX14 damper that's been extensively designed to provide a slim, lightweight damper packed with technology Highly adjustable with race-proven setting bank to match riding style and bike Two-chamber air spring feature a large negative air chamber balanced with the damper s characteristics in the three different ride modes open, pedal, and lockout Creates the initial movement required for superior traction while retaining best-in-class, predictable support when pushing hard 12 clicks of LSC and 12 Clicks of rebound Up to 5 positive volume spacers to adjust progressiveness (depending on travel) Up to 7 negative spacers to adjust initial sensitivity 15mm x 110mm boost floating thru-axle axle design Item Specifications Axle to Crown Length 531 Brake Type Post Mount 180 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Type Tapered Travel (mm) 120 Weight 1598 Wheel Size 29" Ohlins RXC34 m.1 XC Suspension Fork Suspension Fork UPC: 840153633591

by Ohlins

—$7.30

RockShox crown hardware for use in repairs or replacementUpper and lower crown hardware for use on SRAM Boxxer D1+ (2024+) suspension forks RockShox Suspension Fork Crown Hardware Crown/Steerer/Uppertube Assembly UPC: 710845925856

by RockShox

—$1,369

When high-speed descending is the goal, the FOX 38 Factory is the fork to trust, and it redefines what a long-travel single-crown fork can do. Built to handle the most technical descents, the 38 sets the benchmark for confidence, durability, and performance. The precision-engineered suspension inspires control on the steepest, gnarliest descents. The GRIP X2 damper offers unmatched adjustability and plushness. Whether charging down steeps or sending big lines, the FOX 38 delivers the ultimate ride experience. GRIP X2, with all new piston and tune, is the most tunable, supportive and smoothest descent-focused damper ever created by FOX Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction and experience reduced fatigue Generative designed arch and lower legs maintain the 38 s legendary torsional stiffness while increasing the bushing overlap by 20mm for decreased friction and increased sensitivity Updated bleeders and relocated bypass channels on the lowers contribute to even more smoothness and sensitivity at high speed The seamlessly compliant FLOAT Glidecore air spring reduces friction and bind by moving with the fork under dynamic load for a smoother suspension action Floating thru axle allows perfect chassis alignment and reduces unwanted friction between the upper and lower fork legs, providing much smoother suspension movement throughout the entire range of travel Kashima Coating on upper tubes for added durability Item Specifications Axle to Crown Length 593.70000000000005 Brake Type Post Mount 200 Color Shiny Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search FOX Model Year 27 keyword search FOX MY27 Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 180 Weight 2360 Wheel Size 29" FOX 38 Factory GRIP X2 Suspension Fork Suspension Fork UPC: 821973524719

by FOX

—$1,369

When high-speed descending is the goal, the FOX 38 Factory is the fork to trust, and it redefines what a long-travel single-crown fork can do. Built to handle the most technical descents, the 38 sets the benchmark for confidence, durability, and performance. The precision-engineered suspension inspires control on the steepest, gnarliest descents. The GRIP X2 damper offers unmatched adjustability and plushness. Whether charging down steeps or sending big lines, the FOX 38 delivers the ultimate ride experience. GRIP X2, with all new piston and tune, is the most tunable, supportive and smoothest descent-focused damper ever created by FOX Riders reap the benefits of sitting higher in the travel while tires stay glued to the ground, cornering with increased traction and experience reduced fatigue Generative designed arch and lower legs maintain the 38 s legendary torsional stiffness while increasing the bushing overlap by 20mm for decreased friction and increased sensitivity Updated bleeders and relocated bypass channels on the lowers contribute to even more smoothness and sensitivity at high speed The seamlessly compliant FLOAT Glidecore air spring reduces friction and bind by moving with the fork under dynamic load for a smoother suspension action Floating thru axle allows perfect chassis alignment and reduces unwanted friction between the upper and lower fork legs, providing much smoother suspension movement throughout the entire range of travel Kashima Coating on upper tubes for added durability Item Specifications Axle to Crown Length 583.70000000000005 Brake Type Post Mount 200 Color Shiny Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search FOX Model Year 27 keyword search FOX MY27 Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 170 Wheel Size 29" FOX 38 Factory GRIP X2 Suspension Fork Suspension Fork UPC: 821973524726

by FOX

—$70

The first step to achieving great suspension is selecting the correct spring. Ohlins offers a wide range of 7 fork spring rates for the RXF38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins RXF38 fork 60 lbs/in spring rate intended for riders weighing between 220 lbs to 240 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (60 lbs/in has black bands) 191 mm of actual stroke 335 mm (+/- 3mm) free length 18.5 mm I.D. / 4.8 mm wire diameter Ohlins RXF38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642081

by Ohlins

—$88

The Ohlins 200 hour rebuild kit for their suspension fork air spring cartridges includes all major wear items for a more thorough rebuild. Thorough rebuild kit (also called the "200-hour" kit) for the 3-chamber air spring cartridge The 3-chamber air spring cartridge is found in all RXF36, RXF38, and DH38 forks Use this kit if the fork has skipped a few services, has been abused, or exhibits any signs of leaking Includes less common wear items, such as Schrader valves, IFP bump rubber, and seal head scrapers (Please note that not all parts will be used upon completion Individually labeled when necessary to ease identification Ohlins 200 Hour Air Spring Rebuild Kit Service Kit UPC: 840153641510

by Ohlins

—$55

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 170 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640407

by Ohlins

—$2,199

Engineered for unforgiving descents, technical race lines, and the world's most demanding riders, FOX introduces Factory Podium Inverted, a new benchmark in single crown fork performance. Delivering exceptional fore-aft rigidity, ultra-smooth travel, and DH-style confidence, Podium brings an unfair advantage to enduro racers and all-mountain riders alike. Podium is designed to be ridden like a downhill fork. No barriers. No hesitation. Complete confidence that your front wheel will hold the line, no matter how fast-or how big-you push it. All this while keeping your bike in a familiar range of travel and geometry in a single crown package. Fox designed this inverted fork to get the absolute maximum performance out of the industry leading GRIP X2 damper, with every possible gain for smoothness in its travel and confidence-inducing fore-aft rigidity in the chassis. Welcome to the Unfair Advantage. Welcome to Podium. To take full advantage of a damper s capabilities, FOX engineers pursued the optimal design to provide ultra-low friction under load by turning the traditional fork design on its head with an inverted chassis, providing unmatched damping sensitivity when combined with the award-winning Grip X2 damper At the core of Factory Podium Inverted is uncompromising fore-aft stiffness made possible by oversized 47mm upper tubes and a generatively-designed crown structure, allowing riders to hold precise lines with total confidence even at downhill speeds To further increase torsional stiffness, FOX replaced the standard 15mm axle with a steel 20 x 110mm Boost DH axle, distributing forces more evenly across the lower leg interface 175mm of bushing overlap is 32% more than the 38 and even 7% more than the FOX 40 to deliver an unbeatable chassis stiffness and reduced friction under heavy loads The FLOAT EVOL GlideCore air spring, designed with built-in lateral and axial compliance, allows the spring to flex with the f Item Specifications Axle to Crown Length 576 Brake Type Post Mount 200 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 20mm Thru x 110mm Boost keyword search FOX Model Year 26 keyword search FOX MY26 Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 160 Weight 2695 Wheel Size 29" FOX Factory Podium Inverted Suspension Fork Suspension Fork UPC: 821973513232

by FOX

—$1,099

Climb mountains. Charge descents. The RockShox SID Ultimate isn't like other XC forks. It is lighter than ever with a formidable 35mm chassis that holds the line when you're on the edge. The Race Day 2 damper provides efficient Pedal positions, all at your fingertips. SID Ultimate adapts to everything from full-gas cross-country to sporty backcountry loops thanks to a new, higher-volume DebonAir+ spring that's supple at the top of its travel with tons of tunability. 35mm chassis is the perfect blend of light weight and rigidity for the modern XC bike Charger Race Day 2 3P damper is one of the lightest damper on the market and features three compression positions: Open, Pedal, or a rock-solid Lock DebonAir+ provides more small-bump sensitivity and tunable mid-stroke support Bushing package maximizes bushing overlap for a smooth, solid ride Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride Crown machined to shave weight without compromising strength and stiffness Bolt-in torque cap adapters included for use with standard hub end-caps Item Specifications Axle to Crown Length 531 Brake Type Post Mount 180 Color Electric Red Crown Race 40 Defined Color Red External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 230 Steerer Type Tapered Travel (mm) 120 Weight 1480 Wheel Size 29" RockShox SID Ultimate Race Day 2 Suspension Fork Suspension Fork UPC: 710845916939

by RockShox

—$1,079

At under 1300g, the 32 Step-Cast is a superlight MTB fork and made for marathon racing. This fork features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class. With a sleek reverse arch, this fork also gains 40% stiffness over its predecessor Features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class Riders experience a supple stroke with an optimized pedal-to-bump efficiency, as well as a smooth blowoff force in lockout mode to reduce rider fatigue The rear arch matrix was generatively designed to increase stiffness by 40% while minimizing the weight penalty The premium 7000 Series aluminum, zero-offset crown supports angled upper tubes that not only contributes to the 32 Step-Cast's stiffness, but when combined with the ultra-light steerer tube, saves approximately 20g over the previous model Fitted with the proven and reliable FLOAT EVOL air spring Kabolt SL thru-axle drops an additional 12g over the standard Kabolt axle by eliminating the additional weight of the axle nut and decreasing the flange diameter Kashima Coating on upper tubes for added durability Item Specifications Axle to Crown Length 503.7 Brake Type Post Mount 160 Color Shiny Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search FOX Model Year 26 , FOX MY26 Lockout Switch Crown Maximum Tire Width 58 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 32 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 100 Wheel Size 29" FOX 32 Step-Cast Factory GRIP SL Suspension Fork Suspension Fork UPC: 821973504506

by FOX

—$1,199

XC courses are more technical than ever with the latest longer-travel XC bikes more than capable. With a stout full-width stance, increased travel and tire clearance and svelte sub-1500g weight, the new 34 SL Factory suspension fork is built to exceed the demands of modern XC and downcountry. Features Kashima Coating on upper tubes for added smoothness and durability Features an incredibly light and short travel-specific GRIP SL Damper that not only saves weight, but provides an unparalleled ride feel in its class Three on-the-fly compression damping positions: Open, Medium, Firm Air spring top cap uses cassette tool for easy volume adjustments Full-width 34mm chassis with aggressive generative design-aided arch and crown for 17% increase in stiffness and 10mm increase in travel over 34 SC, at only 3% weight increase 20mm increased bushing overlap for reduced friction and greater stiffness with no increase in axle-to-crown length (compared to 34 SC) Longer air spring than 34 SC with larger negative volume mirrors 34 LT s supple initial stroke and 34 SC s supportive mid and end stroke Double-butted damper side stanchion for weight savings Lower Leg Bypass Channels relocated 90 inboard for improved bushing loading and reduced dynamic friction Item Specifications Axle to Crown Length 540.5 Brake Type Post Mount 180 Color Shiny Orange Crown Race 40 Defined Color Orange External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search FOX Model Year 26 , FOX MY26 Lockout Switch Crown Maximum Tire Width 63.5 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Type Tapered Travel (mm) 130 Wheel Size 29" FOX 34 SL Factory Suspension Fork Suspension Fork UPC: 821973504117

by FOX

—$30

RockShox Seal Head Assemblies RockShox Fork Seal Head Air Springs & Parts UPC: 710845877889

by RockShox

—$287

32 Step-Cast FIT4 Damper Assembly FOX 32 Step-Cast FIT4 Damper Assembly Damper, Compression UPC: 821973397368

by FOX

—$50

RockShox DebonAir+ Air Shaft for Pike C1+ Suspension Forks. Includes Air Shaft and Bumpers Buttercup and non-Buttercup compatible Compatible with RockShox FS-PIKE-SEL-C1, FS-PIKE-UFA-C2, FS-PIKE-ULT-C1, FS-PIKE-ULT-C2 RockShox Pike C1+ V2 DebonAir+ Air Shaft Air Springs & Parts UPC: 710845910043

by RockShox

—$49

Replacement steel spring kits for tuning Marzocchi suspension forks. Marzocchi Bomber Z1 Coil Spring Kit Coil Springs & Parts UPC: 821973472430

by Marzocchi

—$104

The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. This upgrade is for those who have 2023+ ZEB, Lyrik and Pike Select+ or Select models, or pre-2023 model Zeb forks. By focusing on refining the shape of the spring curve, RockShox created an air spring that’s more plush off-the-top, with a supremely supportive mid-stroke and improved end-stroke ramp up. They zeroed in on details to improve small bump absorption to be extremely reactive over every inch of trail and added mid-stroke support allowing the fork to sit higher in travel and utilize every millimeter of travel. The new DebonAir+ offers a supreme ride feel and consistency you can trust. Buttercups Little gold-packaged rubber pucks live at the end of the damper and air spring shafts and fit into the lower leg of the fork. Similar technology is found in off-road vehicles, chainsaws, and most devices that transfer high-frequency vibrations into the hands and arms of the user. Like a rubber mount on the handle of the chainsaw, ButterCups measurably eliminate trail chatter by on average 20%. Proven by data acquisition over thousands of trail miles and confirmed by riders. Featured in all Ultimate models and upgrade-able in the full line up of new Pike, Lyrik, and ZEBs. RockShox DebonAir+ Air Spring Assembly Upgrade Air Springs & Parts UPC: 710845895432

by RockShox

—$409

FOX 38 Crown/Steerer/Uppertube Assembies for service and repair. FOX 38 Crown/Steerer/Uppertube Assemblies Crown/Steerer/Uppertube Assembly UPC: 821973421674

by FOX

—$39.95

The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. Revised design features an o-ring for compatibility with Wolf Tooth Axle Handle Multi-Tool Similar to Fox Kabolt axle Designed and manufactured in Minneapolis, MN USA 7075 T6 Aluminum Item Specifications Axle Diameter (mm) 15 Color Black Over Locknut (mm) 100 Overall Length (mm) 145 Thread Length (mm) 15 Thread Pitch 1.5 Weight 49 Wolf Tooth Front Thru Axles Thru Axle UPC: 810006807295

by Wolf Tooth

—$295

The lightest production damper. Ever. Performance packed with a rock-solid lockout to power up climbs and smash through sprint finishes. Every detail machined and optimized to save on weight and maximize your performance Factory tuned compression (in open position) provides the highest level of XC performance, precision and control Maximum efficiency with a rock-solid lockout RockShox Charger Race Day Damper Damper, Compression UPC: 710845895456

by RockShox

—$35

Built with input from the world's best riders, Charger 3.1 RC2 is a brilliant evolution of SRAM's proven damper platform. With increased damping range and High Speed Compression (HSC), Low Speed Compression (LSC), and Low Speed Rebound adjustments, Charger 3.1 RC2 smooths out the roughest trails. Includes shims for compression/rebound tune configurations and piston tool Compatible with RockShox FS-BXR-ULT-D1, FS-LYRK-SEL-D1, FS-LYRK-ULT-D1, FS-LYRK-ULT-D2, FS-PIKE-SEL-C1, FS-PIKE-ULT-C1, FS-PIKE-ULT-C2, FS-ZEB-R-A1, FS-ZEB-SEL-A1, FS-ZEB-SEL-A2, FS-ZEB-ULT-A1, FS-ZEB-ULT-A2, FS-ZEB-ULT-A3 Charger 3.1 RC2 s adjustment range is broader with less compression damping in the LSC open position and additional support in the HSC closed position, this gives you the traction, control, and comfort you need to charge dicey lines all day Includes full right-side internals including controls High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments Includes vibration-fighting ButterCups to block 20% of trail chatter RockShox Charger 3.1 RC2 Damper Upgrade Kit Damper, Compression UPC: 710845910180

by RockShox

—$310

RockShox 32mm Crown/Steerer/Uppertube Assemblies RockShox 32mm Crown/Steerer/Upper Tube Assembly Crown/Steerer/Uppertube Assembly UPC: 710845737213

by RockShox

—$395

RockShox 35mm Crown/Steerer/Uppertube AssembliesNo gradients RockShox 35mm Crown/Steerer/Upper Tube Assembly Crown/Steerer/Uppertube Assembly UPC: 710845776380

by RockShox

—$325

Compared to previous RockShox dampers, Charger2 provides a wider range of low speed compression adjustment in the Open mode, with a more usable Pedal setting that excels on rolling trails and a lighter feel at the top cap. The Charger2 firm setting on Pike and Lyrik has be re-tuned, and remote options with OneLoc provide on-the-fly access to the Firm mode and are an excellent match with RockShox Deluxe, Super Deluxe and Super Deluxe Coil remote rear shocks. RockShox Charger2 Damper Upgrade Kit Damper, Compression UPC: 710845802744

by RockShox

—$325

Transform your existing Fox 36 suspension fork into the ultimate trail fork. The ACS3 coil conversion kit combines small bump sensitivity, traction, and mid stroke support of a coil with the big hit performance of an air spring. By using coil springs, you can eliminate the constant maintenance required to keep your fork running optimally! Fits 2014-Current Fox 36 Includes Air Bump Stop, Lower Plunger Rod, retaining ring, travel indicator and Fox 36 2018-19 Adapter Reduced friction for smoother overall fork performance Air Bump Stop cartridge technology to control the bigger hits towards the end of the travel PUSH Industries ACS3 Coil Component Kit Fox Coil Springs & Parts UPC: 840031600011

by PUSH Industries

—$80

PUSH ultra-light fork springs are precision engineered and CNC wound for exacting rate tolerance. Different spring rates are available in 5 lb/in increments, ensuring you get the exact rate you need without compromise. Fits 140-160mm Travel RockShox Pike 35 lb/in Spring Weight, Yellow Includes Fork spring, Preload Cap and Preload Spacers (2) PUSH Industries ACS3 Spring Assembly RockShox Coil Springs & Parts UPC: 840031601216

by PUSH Industries

—$325

Transform your existing RockShox Pike, Lyrik or Yari suspension fork into the ultimate trail fork. The ACS3 coil conversion kit combines small bump sensitivity, traction, and mid stroke support of a coil with the big hit performance of an air spring. By using coil springs, you can eliminate the constant maintenance required to keep your fork running optimally! Fits 2014-2017 RockShox Boost 27.5 Pike/2018-Current 27.5 and 29 Pike Includes Air Bump Stop, Lower Plunger Rod, retaining ring and travel indicator Reduced friction for smoother overall fork performance Air Bump Stop cartridge technology to control the bigger hits towards the end of the travel PUSH Industries ACS3 Coil Component Kit RockShox Coil Springs & Parts UPC: 840031600080

by PUSH Industries

—$55

SID DebonAir Spring Shaft RockShox SID DebonAir Spring Shaft Air Springs & Parts UPC: 710845855337

by RockShox

—$334

Transform your existing Fox 36 suspension fork into the ultimate trail fork. The ACS3 coil conversion kit combines small bump sensitivity, traction, and mid stroke support of a coil with the big hit performance of an air spring. By using coil springs, you can eliminate the constant maintenance required to keep your fork running optimally! Reduced friction for smoother overall fork performance Air Bump Stop cartridge technology to control the bigger hits towards the end of the travel PUSH Industries ACS3 Coil Component Kit Fox Coil Springs & Parts UPC: 840031605948

by PUSH Industries

—$215

FOX 40 Upper Tubes for Fox suspension fork service and repair. FOX 40 Upper Tubes Crown/Steerer/Uppertube Assembly UPC: 611056176955

by FOX