Forks / Parts

—$1,499

The new BoXXer technology trusted by the world's fastest racers is now available in an approachable Select trim without compromising performance. The all-new LinearXL air spring provides a coil-like ride-supple off the top, supportive through the mid-stroke, and backed by a jounce bottom-out bumper for confident end-stroke control-giving you unwavering consistency on the longest tracks. New Rebound and Compression tunes on the Charger 3.2 RC damper make it equally capable for racers and park rats alike. LinearXL air spring delivers a consistent and predictable ride feel backed by a jounce bottom-out bumper for end-stroke control Charger 3.2 RC damper with easy-to-adjust Compression and independent Rebound features intuitive controls and virtually silent performance, keeping riders focused on the trail Low-grab SKF wiper seals deliver long-lasting fork performance and a smoother ride Maxima 920 blended 15w reduces overall fork friction Bolt-on fender compatibility with front and rear coverage (BoXXer Bolt-On Fender sold separately) Item Specifications Axle to Crown Length 605 Brake Type Post Mount 200 Color Gloss Black Crown Race 30 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 20mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 48 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Tube Length (mm) 268 Steerer Type Straight Travel (mm) 200 Wheel Size 29" RockShox BoXXer Select Charger 3.2 RC Suspension Fork Suspension Fork UPC: 710845926891 MPN: 00.4021.276.003

by RockShox

—$1,999

Born from racing, BoXXer Ulitimate promises one thing above all-composure. By eliminating chaos before it reaches the rider, every run delivers predictable speed, traction, and control. The all-new LinearXL air spring provides a coil-like ride-supple off the top, supportive through the mid-stroke, and backed by a jounce bottom-out bumper for confident end-stroke control-giving you unwavering consistency and predictability. Found only in our Ultimate forks, ButterWagonTech ensures a constant supply of oil to the bushings, reducing friction and maintaining smooth performance throughout the entire service interval. Intuitive HSC/LSC controls on the Charger 3.2 damper with ButterCups technology make setup fast, understandable, and easy to communicate. You're so composed you don't realize you're going faster. But the clock says it all. LinearXL air spring delivers a consistent and predictable ride feel backed by a jounce bottom-out bumper for end-stroke control ButterWagonTech ensures a constant supply of oil to the bushings, reducing friction and maintaining smooth performance throughout the entire service interval Charger 3.2 damper with new Rebound/Compression tunes that match LinearXL air spring, achieves virtually silent performance, keeping riders focused on the trail Control bezel with numbered Compression adjuster for intuitive adjustments start at 0 and easily add or decrease damping ButterCups technology block 20% of high-frequency trail chatter to reduce hand and arm fatigue, while the Low-Grab SKF wiper seals deliver long-lasting fork performance and a smoother ride Maxima 920 blended 15w reduces overall fork friction Bolt-on fender compatibility with front and rear coverage (BoXXer Bolt-On Fender sold separately) Item Specifications Axle to Crown Length 605 Brake Type Post Mount 200 Color Gloss Black Crown Race 30 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 20mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Tube Length (mm) 268 Steerer Type Straight Travel (mm) 200 Wheel Size 27.5" RockShox BoXXer Ultimate Charger 3.2 Suspension Fork Suspension Fork UPC: 710845927034 MPN: 00.4021.277.003

by RockShox

—$1,499

The new BoXXer technology trusted by the world's fastest racers is now available in an approachable Select trim without compromising performance. The all-new LinearXL air spring provides a coil-like ride-supple off the top, supportive through the mid-stroke, and backed by a jounce bottom-out bumper for confident end-stroke control-giving you unwavering consistency on the longest tracks. New Rebound and Compression tunes on the Charger 3.2 RC damper make it equally capable for racers and park rats alike. LinearXL air spring delivers a consistent and predictable ride feel backed by a jounce bottom-out bumper for end-stroke control Charger 3.2 RC damper with easy-to-adjust Compression and independent Rebound features intuitive controls and virtually silent performance, keeping riders focused on the trail Low-grab SKF wiper seals deliver long-lasting fork performance and a smoother ride Maxima 920 blended 15w reduces overall fork friction Bolt-on fender compatibility with front and rear coverage (BoXXer Bolt-On Fender sold separately) Item Specifications Axle to Crown Length 605 Brake Type Post Mount 200 Color Gloss Black Crown Race 30 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 20mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 52 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Tube Length (mm) 268 Steerer Type Straight Travel (mm) 200 Wheel Size 29" RockShox BoXXer Select Charger 3.2 RC Suspension Fork Suspension Fork UPC: 710845926884 MPN: 00.4021.276.002

by RockShox

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork MPN: PUSH-NINEONE-275-BRZ-160

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork MPN: PUSH-NINEONE-275-BRZ-140

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork MPN: PUSH-NINEONE-275-BRZ-170

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork MPN: PUSH-NINEONE-275-BLK-160

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork MPN: PUSH-NINEONE-275-BLK-140

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork MPN: PUSH-NINEONE-275-BLK-150

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork MPN: PUSH-NINEONE-275-BLK-170

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork MPN: PUSH-NINEONE-275-BRZ-150

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork MPN: PUSH-NINEONE-29-BLK-140

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork MPN: PUSH-NINEONE-29-BRZ-150

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork MPN: PUSH-NINEONE-29-BRZ-160

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork MPN: PUSH-NINEONE-29-BLK-150

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork MPN: PUSH-NINEONE-29-BLK-160

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork MPN: PUSH-NINEONE-29-BRZ-140

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork MPN: PUSH-NINEONE-29-BLK-170

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork MPN: PUSH-NINEONE-29-BRZ-170

by PUSH Industries

—$549

Premium performance at an unbeatable price. Capitalizing on the innovations born from SID, Reba Gold features an air spring inspired by SID, an XC-tuned Isolator RL damper, and a sleek 35mm chassis, delivering top-tier capability without breaking the bank. XC-tuned Isolator RL damper offers Open, 3-Position Open, Pedal, and Lock settings Highly tunable DebonAir air spring Externally adjusted rebound lets rider adjust to their preference 35mm straight wall stanchions feature Fast Black coating to provide improved durability and decreased friction Allows tire widths up to 81mm/3.19 inches Minimum 180mm / Maximum 200mm disc rotor diameter Fork comes with a Bolt On fender, Star nut and Maxle Stealth thru-axle Item Specifications Axle to Crown Length 524 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 265 Steerer Type Tapered Travel (mm) 110 Wheel Size 29" RockShox Reba Gold Isolator RL Suspension Fork Suspension Fork UPC: 710845918155 MPN: 00.4021.171.005

by RockShox

—$549

Premium performance at an unbeatable price. Capitalizing on the innovations born from SID, Reba Gold features an air spring inspired by SID, an XC-tuned Isolator RL damper, and a sleek 35mm chassis, delivering top-tier capability without breaking the bank. XC-tuned Isolator RL damper offers Open, 3-Position Open, Pedal, and Lock settings Highly tunable DebonAir air spring Externally adjusted rebound lets rider adjust to their preference 35mm straight wall stanchions feature Fast Black coating to provide improved durability and decreased friction Allows tire widths up to 81mm/3.19 inches Minimum 180mm / Maximum 200mm disc rotor diameter Fork comes with a Bolt On fender, Star nut and Maxle Stealth thru-axle Item Specifications Axle to Crown Length 544 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 265 Steerer Type Tapered Travel (mm) 130 Wheel Size 29" RockShox Reba Gold Isolator RL Suspension Fork Suspension Fork UPC: 710845918179 MPN: 00.4021.171.007

by RockShox

—$549

Premium performance at an unbeatable price. Capitalizing on the innovations born from SID, Reba Gold features an air spring inspired by SID, an XC-tuned Isolator RL damper, and a sleek 35mm chassis, delivering top-tier capability without breaking the bank. XC-tuned Isolator RL damper offers Open, 3-Position Remote-Operated (Remote sold separately) Open, Pedal, and Lock settings Highly tunable DebonAir air spring Externally adjusted rebound lets rider adjust to their preference 35mm straight wall stanchions feature Fast Black coating to provide improved durability and decreased friction Allows tire widths up to 81mm/3.19 inches Minimum 180mm / Maximum 200mm disc rotor diameter Fork comes with a Bolt On fender, Star nut and Maxle Stealth thru-axle Item Specifications Axle to Crown Length 534 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Handlebar Remote Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 265 Steerer Type Tapered Travel (mm) 120 Wheel Size 29" RockShox Reba Gold Isolator RL Suspension Fork Suspension Fork UPC: 710845918209 MPN: 00.4021.171.010

by RockShox

—$549

Premium performance at an unbeatable price. Capitalizing on the innovations born from SID, Reba Gold features an air spring inspired by SID, an XC-tuned Isolator RL damper, and a sleek 35mm chassis, delivering top-tier capability without breaking the bank. XC-tuned Isolator RL damper offers Open, 3-Position Open, Pedal, and Lock settings Highly tunable DebonAir air spring Externally adjusted rebound lets rider adjust to their preference 35mm straight wall stanchions feature Fast Black coating to provide improved durability and decreased friction Allows tire widths up to 81mm/3.19 inches Minimum 180mm / Maximum 200mm disc rotor diameter Fork comes with a Bolt On fender, Star nut and Maxle Stealth thru-axle Item Specifications Axle to Crown Length 534 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 265 Steerer Type Tapered Travel (mm) 120 Wheel Size 29" RockShox Reba Gold Isolator RL Suspension Fork Suspension Fork UPC: 710845918162 MPN: 00.4021.171.006

by RockShox

—$2,199

Engineered for unforgiving descents, technical race lines, and the world's most demanding riders, FOX introduces Factory Podium Inverted, a new benchmark in single crown fork performance. Delivering exceptional fore-aft rigidity, ultra-smooth travel, and DH-style confidence, Podium brings an unfair advantage to enduro racers and all-mountain riders alike. Podium is designed to be ridden like a downhill fork. No barriers. No hesitation. Complete confidence that your front wheel will hold the line, no matter how fast-or how big-you push it. All this while keeping your bike in a familiar range of travel and geometry in a single crown package. Fox designed this inverted fork to get the absolute maximum performance out of the industry leading GRIP X2 damper, with every possible gain for smoothness in its travel and confidence-inducing fore-aft rigidity in the chassis. Welcome to the Unfair Advantage. Welcome to Podium. 68HT version is designed for use with larger diameter headtubes typically associated with eBikes To take full advantage of a damper s capabilities, FOX engineers pursued the optimal design to provide ultra-low friction under load by turning the traditional fork design on its head with an inverted chassis, providing unmatched damping sensitivity when combined with the award-winning Grip X2 damper At the core of Factory Podium Inverted is uncompromising fore-aft stiffness made possible by oversized 47mm upper tubes and a generatively-designed crown structure, allowing riders to hold precise lines with total confidence even at downhill speeds To further increase torsional stiffness, FOX replaced the standard 15mm axle with a steel 20 x 110mm Boost DH axle, distributing forces more evenly across the lower leg interface 175mm of bushing overlap is 32% more than the 38 and even 7% more than the FOX 40 to deliver an unbeatable chassis stiffness and reduced friction under heavy loads The FLOAT EVOL GlideCore air spring, designed with built-in lateral and axial compliance, allows the spring to flex with the f Item Specifications Axle to Crown Length 576 Brake Type Post Mount 200 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 20mm Thru x 110mm Boost keyword search FOX Model Year 26 keyword search FOX MY26 Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 160 Weight 2695 Wheel Size 29" FOX Factory Podium Inverted Suspension Fork Suspension Fork UPC: 821973513218 MPN: 910-21-399

by FOX

—$1,099

Climb mountains. Charge descents. The RockShox SID Ultimate isn't like other XC forks. It is lighter than ever with a formidable 35mm chassis that holds the line when you're on the edge. The Race Day 2 damper provides efficient Pedal positions, all at your fingertips. SID Ultimate adapts to everything from full-gas cross-country to sporty backcountry loops thanks to a new, higher-volume DebonAir+ spring that's supple at the top of its travel with tons of tunability. 35mm chassis is the perfect blend of light weight and rigidity for the modern XC bike Charger Race Day 2 2P damper is one of the lightest damper on the market and features two-position compression adjustment: Open or a rock-solid Lock (Remote sold separate) DebonAir+ provides more small-bump sensitivity and tunable mid-stroke support Bushing package maximizes bushing overlap for a smooth, solid ride Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride Crown machined to shave weight without compromising strength and stiffness Bolt-in torque cap adapters included for use with standard hub end-caps 2 pos remote TwistLoc/OneLoc (10mm Cable Pull sold separately) Item Specifications Axle to Crown Length 531 Brake Type Post Mount 180 Color Electric Red Crown Race 40 Defined Color Red External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 230 Steerer Type Tapered Travel (mm) 120 Weight 1480 Wheel Size 29" RockShox SID Ultimate Race Day 2 Suspension Fork Suspension Fork UPC: 710845915192 MPN: 00.4020.956.002

by RockShox

—$929

Gravel riders who want to get wild choose the RockShox Rudy XPLR. It's efficient for days of triple-digit mileage while delivering control and comfort when things get rough. Rudy rides on the superlight Charger Race Day 2 damper with 2-position Compression adjustment: Open and a rock-solid, sprint-ready Lock. Rudy offers precise steering with its 30mm chassis and compatibility for full or short fenders. Gravel riding keeps evolving-isn't it time to ride a fork that's on the cutting edge? Charger Race Day 2 Damper every detail perfected, every extra ounce shaved away, is RockShox's lightest performance-driven damper and features 2 Compression positions: Open or a rock-solid Lock Solo Air spring is specifically tuned for short travel Machined and anodized aluminum crown is exceptionally lightweight and durable Maxima Plush Dynamic Lower Leg Lube reduces friction and enhances fork performance ride after ride 3-bolt mounts to fit a short fender (RockShox fender included) Full fender compatibility using custom stealth stay bosses (sold separately) Maxima Plush damping fluid reduces friction and silences damper noise Fits up to 700x50 tires Item Specifications Axle to Crown Length 435 Brake Type Post Mount 160 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 12mm Thru x 100mm Lockout Switch Crown Maximum Tire Width 50 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 30 Steerer Type Tapered Travel (mm) 40 Wheel Size 700c RockShox RUDY Ultimate XPLR Race Day 2 Suspension Fork Suspension Fork UPC: 710845918681 MPN: 00.4021.080.006

by RockShox

—$929

Gravel riders who want to get wild choose the RockShox Rudy XPLR. It's efficient for days of triple-digit mileage while delivering control and comfort when things get rough. Rudy rides on the superlight Charger Race Day 2 damper with 2-position Compression adjustment: Open and a rock-solid, sprint-ready Lock. Rudy offers precise steering with its 30mm chassis and compatibility for full or short fenders. Gravel riding keeps evolving-isn't it time to ride a fork that's on the cutting edge? Charger Race Day 2 Damper every detail perfected, every extra ounce shaved away, is RockShox's lightest performance-driven damper and features 2 Compression positions: Open or a rock-solid Lock Solo Air spring is specifically tuned for short travel Machined and anodized aluminum crown is exceptionally lightweight and durable Maxima Plush Dynamic Lower Leg Lube reduces friction and enhances fork performance ride after ride 3-bolt mounts to fit a short fender (RockShox fender included) Full fender compatibility using custom stealth stay bosses (sold separately) Maxima Plush damping fluid reduces friction and silences damper noise Fits up to 700x50 tires Item Specifications Axle to Crown Length 425 Brake Type Post Mount 160 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 12mm Thru x 100mm Lockout Switch Crown Maximum Tire Width 50 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 30 Steerer Type Tapered Travel (mm) 30 Wheel Size 700c RockShox RUDY Ultimate XPLR Race Day 2 Suspension Fork Suspension Fork UPC: 710845918698 MPN: 00.4021.080.007

by RockShox

—$929

Gravel riders who want to get wild choose the RockShox Rudy XPLR. It's efficient for days of triple-digit mileage while delivering control and comfort when things get rough. Rudy rides on the superlight Charger Race Day 2 damper with 2-position Compression adjustment: Open and a rock-solid, sprint-ready Lock. Rudy offers precise steering with its 30mm chassis and compatibility for full or short fenders. Gravel riding keeps evolving-isn't it time to ride a fork that's on the cutting edge? Charger Race Day 2 Damper every detail perfected, every extra ounce shaved away, is RockShox's lightest performance-driven damper and features 2 Compression positions: Open or a rock-solid Lock Solo Air spring is specifically tuned for short travel Machined and anodized aluminum crown is exceptionally lightweight and durable Maxima Plush Dynamic Lower Leg Lube reduces friction and enhances fork performance ride after ride 3-bolt mounts to fit a short fender (RockShox fender included) Full fender compatibility using custom stealth stay bosses (sold separately) Maxima Plush damping fluid reduces friction and silences damper noise Fits up to 700x50 tires Item Specifications Axle to Crown Length 425 Brake Type Post Mount 160 Color Electric Red Crown Race 40 Defined Color Red External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 12mm Thru x 100mm Lockout Switch Crown Maximum Tire Width 50 Negative Spring Air Offset 45 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 30 Steerer Type Tapered Travel (mm) 30 Wheel Size 700c RockShox RUDY Ultimate XPLR Race Day 2 Suspension Fork Suspension Fork UPC: 710845916977 MPN: 00.4021.080.005

by RockShox

—$929

Gravel riders who want to get wild choose the RockShox Rudy XPLR. It's efficient for days of triple-digit mileage while delivering control and comfort when things get rough. Rudy rides on the superlight Charger Race Day 2 damper with 2-position Compression adjustment: Open and a rock-solid, sprint-ready Lock. Rudy offers precise steering with its 30mm chassis and compatibility for full or short fenders. Gravel riding keeps evolving-isn't it time to ride a fork that's on the cutting edge? Charger Race Day 2 Damper every detail perfected, every extra ounce shaved away, is RockShox's lightest performance-driven damper and features 2 Compression positions: Open or a rock-solid Lock Solo Air spring is specifically tuned for short travel Machined and anodized aluminum crown is exceptionally lightweight and durable Maxima Plush Dynamic Lower Leg Lube reduces friction and enhances fork performance ride after ride 3-bolt mounts to fit a short fender (RockShox fender included) Full fender compatibility using custom stealth stay bosses (sold separately) Maxima Plush damping fluid reduces friction and silences damper noise Fits up to 700x50 tires Item Specifications Axle to Crown Length 435 Brake Type Post Mount 160 Color Electric Red Crown Race 40 Defined Color Red External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 12mm Thru x 100mm Lockout Switch Crown Maximum Tire Width 50 Negative Spring Air Offset 45 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 30 Steerer Type Tapered Travel (mm) 40 Wheel Size 700c RockShox RUDY Ultimate XPLR Race Day 2 Suspension Fork Suspension Fork UPC: 710845916960 MPN: 00.4021.080.004

by RockShox

—$1,149

Ultra-versatile, super capable, lightweight on the scales, heavy on the attitude-this is RockShox Pike. Not afraid of the rooty chutes. Unintimidated by the calf-crushing climbs. RockShox has updated their trail-capable legend with the new Charger 3.1 RC2 damper. Along with vibration-crushing ButterCups, this damper offers better traction, comfort, and control. With more tunable range, Charger 3.1 enables riders to set up the perfect suspension action for their preferences. A fork designed to level up your trail game. Experience the legend. Charger 3.1 is the evolution of SRAM's proven damper platform that offers increased damping range, High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments for a smoother ride Charger 3.1 RC2 s adjustment range is broader with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day ButterCups block 20% of high-frequency vibrations and massively reduces hand and arm fatigue DebonAir+ air spring is built to provide a balance of a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride Lightweight machined and anodized crown for premium looks and durability Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel Item Specifications Axle to Crown Length 531 Brake Type Post Mount 180 Color Electric Red Crown Race 40 Defined Color Red External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 265 Steerer Type Tapered Travel (mm) 120 Weight 1887 Wheel Size 29" RockShox Pike Ultimate Charger 3.1 RC2 Suspension Fork Suspension Fork UPC: 710845917172 MPN: 00.4021.038.026

by RockShox

—$929

Gravel riders who want to get wild choose the RockShox Rudy XPLR. It's efficient for days of triple-digit mileage while delivering control and comfort when things get rough. Rudy rides on the superlight Charger Race Day 2 damper with 2-position Compression adjustment: Open and a rock-solid, sprint-ready Lock. Rudy offers precise steering with its 30mm chassis and compatibility for full or short fenders. Gravel riding keeps evolving-isn't it time to ride a fork that's on the cutting edge? Charger Race Day 2 Damper every detail perfected, every extra ounce shaved away, is RockShox's lightest performance-driven damper and features 2 Compression positions: Open or a rock-solid Lock Solo Air spring is specifically tuned for short travel Machined and anodized aluminum crown is exceptionally lightweight and durable Maxima Plush Dynamic Lower Leg Lube reduces friction and enhances fork performance ride after ride 3-bolt mounts to fit a short fender (RockShox fender included) Full fender compatibility using custom stealth stay bosses (sold separately) Maxima Plush damping fluid reduces friction and silences damper noise Fits up to 700x50 tires Item Specifications Axle to Crown Length 425 Brake Type Post Mount 160 Color Electric Red Crown Race 40 Defined Color Red External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 12mm Thru x 100mm Lockout Switch Crown Maximum Tire Width 50 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 30 Steerer Type Tapered Travel (mm) 30 Wheel Size 700c RockShox RUDY Ultimate XPLR Race Day 2 Suspension Fork Suspension Fork UPC: 710845918711 MPN: 00.4021.080.009

by RockShox

—$929

Gravel riders who want to get wild choose the RockShox Rudy XPLR. It's efficient for days of triple-digit mileage while delivering control and comfort when things get rough. Rudy rides on the superlight Charger Race Day 2 damper with 2-position Compression adjustment: Open and a rock-solid, sprint-ready Lock. Rudy offers precise steering with its 30mm chassis and compatibility for full or short fenders. Gravel riding keeps evolving-isn't it time to ride a fork that's on the cutting edge? Charger Race Day 2 Damper every detail perfected, every extra ounce shaved away, is RockShox's lightest performance-driven damper and features 2 Compression positions: Open or a rock-solid Lock Solo Air spring is specifically tuned for short travel Machined and anodized aluminum crown is exceptionally lightweight and durable Maxima Plush Dynamic Lower Leg Lube reduces friction and enhances fork performance ride after ride 3-bolt mounts to fit a short fender (RockShox fender included) Full fender compatibility using custom stealth stay bosses (sold separately) Maxima Plush damping fluid reduces friction and silences damper noise Fits up to 700x50 tires Item Specifications Axle to Crown Length 435 Brake Type Post Mount 160 Color Electric Red Crown Race 40 Defined Color Red External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 12mm Thru x 100mm Lockout Switch Crown Maximum Tire Width 50 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 30 Steerer Type Tapered Travel (mm) 40 Wheel Size 700c RockShox RUDY Ultimate XPLR Race Day 2 Suspension Fork Suspension Fork UPC: 710845918704 MPN: 00.4021.080.008

by RockShox

—$1,099.95

The Ribbon Coil gives you the supple action of coil with end stroke control previously found only with air forks. Compared to air springs, fewer seals reduce stiction, allowing the fork to be more reactive to the terrain and extending service life. MRP's Ramp Control manages bottom-out events and other high frequency impacts to ensure riders stay high in the travel and in control. Robust Outcast arch provides lateral stiffness and doesn't fill with mud PSST pressure relief valve at the back of the fork lowers aids in equalization at high altitude and under aggressive riding 8 position crown-adjustable low-speed compression damping Bladder-free IFP damper design Includes QR-Style Thru-Axle Soft (Yellow), Medium (Green) & Firm (Blue) springs included. Extra-Soft (White) and Extra-Firm (Red) springs sold separately Item Specifications Axle to Crown Length 562 Brake Type Post Mount 180 Color Black Crown Race 40 Defined Color Black External Adjustments Coil Preload External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 67 Negative Spring Coil Offset 44 Positive Spring Coil S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Type Tapered Travel (mm) 170 Wheel Size 27.5" MRP Ribbon Coil Suspension Fork Suspension Fork UPC: 702430184106 MPN: WB-20-2202

by MRP

—$849.99

Loaded with unprecedented features, Mezzer gives you the handling and control you need for the ultimate enduro ride. Built around 37mm stanchions and a Reverse-Arch lower leg design with the Hexlock SL2 axle, Mezzer is the stiffest chassis in its category. 37mm stanchions, Reverse-Arch design and Hexlock SL2 axle for the ultimate stiffness IVA Air Volume Adjustability VTT Damper w/ 6-position compression and rebound adjustability 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Item Specifications Axle to Crown Length 564 Brake Type Post Mount 180 Color Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments High Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 74 Negative Spring Air Offset 37 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 37 Steerer Tube Length (mm) 251 Steerer Type Tapered Travel (mm) 180 Wheel Size 27.5" Manitou Mezzer Expert Suspension Fork Suspension Fork UPC: 847863026880 MPN: 191-37137-A101

by Manitou

—$1,099.99

Loaded with unprecedented features, Mezzer Pro gives you the handling and control you need for the ultimate enduro ride. Built around 37mm stanchions and a Reverse-Arch lower leg design with the Hexlock SL2 axle, Mezzer Pro is the stiffest chassis in its category. 37mm stanchions, Reverse-Arch design and Hexlock SL2 axle for the ultimate stiffness Fully adjustable IRT air spring to fine tune ride feel Sealed MC2 damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Item Specifications Axle to Crown Length 584 Brake Type Post Mount 180 Color Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch None Maximum Tire Width 74 Negative Spring Air Offset 37 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 37 Steerer Tube Length (mm) 248 Steerer Type Tapered Travel (mm) 180 Weight 2000 Wheel Size 27.5" Manitou Mezzer Pro Suspension Fork Suspension Fork UPC: 844171075937 MPN: 191-36235-A101

by Manitou

—$1,199.95

The Ribbon Air is an enduro-capable trail fork with unprecedented adjustment features. Beefy stanchions, extra-plush small bump compliance, and a distinctive arch combine to make a fork that excels under a variety of trail conditions. Robust Outcast arch provides lateral stiffness and doesn't fill with mud PSST pressure relief valve aids in equalization at high altitude and under aggressive riding Ramp control allows quick tuning from progressive to linear spring feel on the trail 8 position compression damping Positive/negative air adjust allows for extra fine tuning Bladder-free IFP damper design Item Specifications Axle to Crown Length 552 Brake Type Post Mount 180 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping Front Axle 15mm Thru x 110mm Maximum Tire Width 2.6 - 3.0" Negative Spring Air Offset 41 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Type Tapered Travel (mm) 140 Weight 1950 Wheel Size 27.5+ Wheel Size 29" MRP Ribbon Air Suspension Fork Suspension Fork UPC: 702430183994 MPN: WB-20-2110

by MRP

—$1,199.95

The Ribbon Air is an enduro-capable trail fork with unprecedented adjustment features. Beefy stanchions, extra-plush small bump compliance, and a distinctive arch combine to make a fork that excels under a variety of trail conditions. Robust Outcast arch provides lateral stiffness and doesn't fill with mud PSST pressure relief valve aids in equalization at high altitude and under aggressive riding Ramp control allows quick tuning from progressive to linear spring feel on the trail 8 position compression damping Positive/negative air adjust allows for extra fine tuning Bladder-free IFP damper design Item Specifications Axle to Crown Length 552 Brake Type Post Mount 180 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping Front Axle 15mm Thru x 110mm Maximum Tire Width 2.6" Negative Spring Air Offset 39 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Type Tapered Travel (mm) 160 Weight 1950 Wheel Size 27.5" MRP Ribbon Air Suspension Fork Suspension Fork UPC: 702430184069 MPN: WB-20-2114

by MRP

—$1,199.95

The Ribbon Air is an enduro-capable trail fork with unprecedented adjustment features. Beefy stanchions, extra-plush small bump compliance, and a distinctive arch combine to make a fork that excels under a variety of trail conditions. Robust Outcast arch provides lateral stiffness and doesn't fill with mud PSST pressure relief valve aids in equalization at high altitude and under aggressive riding Ramp control allows quick tuning from progressive to linear spring feel on the trail 8 position compression damping Positive/negative air adjust allows for extra fine tuning Bladder-free IFP damper design Item Specifications Axle to Crown Length 562 Brake Type Post Mount 180 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping Front Axle 15mm Thru x 110mm Maximum Tire Width 2.6" Negative Spring Air Offset 39 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Type Tapered Travel (mm) 170 Weight 1950 Wheel Size 27.5" MRP Ribbon Air Suspension Fork Suspension Fork UPC: 702430184045 MPN: WB-20-2115

by MRP

—$869

Poppy, playful, and singletrack minded, the new Pike Select Charger RC is equipped with an all-new 35mm chassis paired with the Charger RC damper. Matched with the new DebonAir+ air spring and new premium fender compatibility. It's time to fall in love with Pike, all over again. 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible Charger RC damper featuring Low Speed Compression adjust DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep Compatible with new Pressure Relief Valves. Eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature. With the press of a button or two, Pressure Relief Valves restore premium fork feel. Pressure Relief Valve upgrade kits available Maxima Plush Dynamic Suspension Lube reduces friction and enhances fork performance ride after ride, and Maxima Plush damping fluid reduces friction and silences damper noise Bolt-in torque cap adapters now included for the use with standard hub end caps Item Specifications Axle to Crown Length 532 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 37 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 245 Steerer Type Tapered Travel (mm) 140 Wheel Size 27.5" RockShox Pike Select Charger RC Suspension Fork Suspension Fork UPC: 710845859700 MPN: 00.4020.696.003

by RockShox

—$989

ZEB Select is packed with performance in a stout 38mm chassis and features the updated DebonAir air spring with the trusted Charger RC damper. SKF wiper seals and Maxima Plush fluid reduce friction, silences noise, and provides all-around lasting performance anywhere you need it to be. Charger RC damper featuring low speed compression adjustment Large 38mm chassis for increased stiffness and rider confidence Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel Maxima Plush damping fluid reduces friction and silences damper noise Item Specifications Axle to Crown Length 577 Brake Type Post Mount 200 Color Diffusion Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Tapered Travel (mm) 180 Wheel Size 27.5" RockShox ZEB Select Charger RC Suspension Fork Suspension Fork UPC: 710845861055 MPN: 00.4020.818.001

by RockShox

—$989

ZEB Select is packed with performance in a stout 38mm chassis and features the updated DebonAir air spring with the trusted Charger RC damper. SKF wiper seals and Maxima Plush fluid reduce friction, silences noise, and provides all-around lasting performance anywhere you need it to be. Charger RC damper featuring low speed compression adjustment Large 38mm chassis for increased stiffness and rider confidence Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel Maxima Plush damping fluid reduces friction and silences damper noise Item Specifications Axle to Crown Length 567 Brake Type Post Mount 200 Color Diffusion Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Tapered Travel (mm) 170 Wheel Size 27.5" RockShox ZEB Select Charger RC Suspension Fork Suspension Fork UPC: 710845861062 MPN: 00.4020.818.002

by RockShox

—$989

ZEB Select is packed with performance in a stout 38mm chassis and features the updated DebonAir air spring with the trusted Charger RC damper. SKF wiper seals and Maxima Plush fluid reduce friction, silences noise, and provides all-around lasting performance anywhere you need it to be. Charger RC damper featuring low speed compression adjustment Large 38mm chassis for increased stiffness and rider confidence Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel Maxima Plush damping fluid reduces friction and silences damper noise Item Specifications Axle to Crown Length 587 Brake Type Post Mount 200 Color Diffusion Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Tapered Travel (mm) 190 Wheel Size 27.5" RockShox ZEB Select Charger RC Suspension Fork Suspension Fork UPC: 710845861048 MPN: 00.4020.818.000

by RockShox

—$1,149

FOX 38 Performance Elite Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized stanchions. GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity Floating axle design provide much smoother suspension movement throughout the entire range of the fork s travel, notably improving sensitivity and overall ride quality Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button Equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro an Item Specifications Axle to Crown Length 565.7 Brake Type Post Mount 160 Color MatteBlack Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping Front Axle 15mm Thru x 110mm Lockout Switch None Maximum Tire Width 72 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 170 Wheel Size 27.5" FOX 38 Performance Elite Suspension Fork Suspension Fork UPC: 821973457253 MPN: 910-21-143

by FOX

—$799.99

Lighter, stiffer, and more tunable than its competitors, the Mattoc Expert is the desired componentry for all bikes, improving the riding experience in a meaningful way. This lightweight and efficient fork features industry leading stiffness that ensures precise and reactive handling, ready to outperform any other product it is compared to. The Manitou Expert boasts an Expert Air spring with IVA, compression damping via the VTT-6P system and rebound damping via an open cartridge with adjustable TPC. True to Manitou's industry leading tuning capabilities, the Expert allows adjustments via Air, Air Volume, Rebound, and 3-position Compression (Open, Trail, Lock) With Open Mode Low Speed Compression Adjustment. Perhaps the most versatile fork available not only in terms of travel but also application and customization of performance. Such amazing performance, tailor tuned to your needs, arises from Manitou's never-ending search for a smoother and better, best ride. Expert air allows for internal travel adjustments with no added parts. New travel spacers account for negative air volume change, so the 110mm fork has the same initial stroke feel as the 150mm Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to Dorado Air in a more cost-effective package Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider weight, style, and conditions without the need for additional parts A single external compression adjuster that simultaneously adjusts High and Low speed damping characteristics. It features a fixed shim stack and a second Item Specifications Axle to Crown Length 552 Brake Type Post Mount 160 Color Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch None Maximum Tire Width 67 Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 250 Steerer Type Tapered Travel (mm) 140 Weight 1770 Wheel Size 29" Manitou Mattoc Expert Suspension Fork Suspension Fork UPC: 844171092125 MPN: 191-38578-A002

by Manitou

—$549.99

The Mattoc delivers longer travel and adjustability for riders looking to push their riding to the next level. Stealth graphic kit included Slippery-smooth black ano stanchions Low-friction dust seals Reverse-arch casting Item Specifications Axle to Crown Length 552 Brake Type Post Mount 160 Color Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch None Maximum Tire Width 67 Offset 37 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 250 Steerer Type Tapered Travel (mm) 140 Weight 2020 Wheel Size 29" Manitou Mattoc Comp Suspension Fork Suspension Fork UPC: 844171091821 MPN: 191-38600-A003

by Manitou

—$499.99

The Mattoc delivers longer travel and adjustability for riders looking to push their riding to the next level. Stealth graphic kit included Slippery-smooth black ano stanchions Low-friction dust seals Reverse-arch casting Item Specifications Axle to Crown Length 532 Brake Type Post Mount 160 Color Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch None Maximum Tire Width 67 Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 250 Steerer Type Tapered Travel (mm) 120 Weight 2020 Wheel Size 29" Manitou Mattoc Comp Suspension Fork Suspension Fork UPC: 844171091937 MPN: 191-38600-A005

by Manitou

—$639

The RockShox Domain platform goes bigger than ever with the updated Domain Gold RC. Taking cues from ZEB, RockShox's decorated enduro fork, Domain combines value and performance. The new Isolator damper is the highlight of this fork, with a unique three-position solution that maximizes oil flow management across the full compression range. A burly 38mm chassis, top-of-the-line Maxima Plush Dynamic Suspension Lube, and RockShox's trusted DebonAir air spring round out Domain's rugged package Isolator RC damper features a three-position Compression adjustment (Open, Pedal, and Firm) with externally-adjustable Rebound providing superior traction, control, and confidence for the rider 38mm chassis for increased stiffness, perfect for mountain bikes and E-MTBs alike Highly tunable DebonAir air spring sits higher in the travel making the most of Domain s travel and offers a smooth, consistent, coil-like feel throughout the stroke Highly tunable and Bottomless Token ready Short fender compatible (RockShox short fender included) Maxima Plush damping fluid reduces friction and quiets rebound damper noise Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride Item Specifications Axle to Crown Length 566 Brake Type Post Mount 200 Color Gloss Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search RockShox Model Year 25 keyword search RockShox MY25 Lockout Switch None Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Tapered Travel (mm) 150 Wheel Size 29" RockShox Domain Gold Isolator RC3 Suspension Fork Suspension Fork UPC: 710845904080 MPN: 00.4021.081.007

by RockShox

—$639

The RockShox Domain platform goes bigger than ever with the updated Domain Gold RC. Taking cues from ZEB, RockShox's decorated enduro fork, Domain combines value and performance. The new Isolator damper is the highlight of this fork, with a unique three-position solution that maximizes oil flow management across the full compression range. A burly 38mm chassis, top-of-the-line Maxima Plush Dynamic Suspension Lube, and RockShox's trusted DebonAir air spring round out Domain's rugged package Isolator RC damper features a three-position Compression adjustment (Open, Pedal, and Firm) with externally-adjustable Rebound providing superior traction, control, and confidence for the rider 38mm chassis for increased stiffness, perfect for mountain bikes and E-MTBs alike Highly tunable DebonAir air spring sits higher in the travel making the most of Domain s travel and offers a smooth, consistent, coil-like feel throughout the stroke Highly tunable and Bottomless Token ready Short fender compatible (RockShox short fender included) Maxima Plush damping fluid reduces friction and quiets rebound damper noise Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride Item Specifications Axle to Crown Length 586 Brake Type Post Mount 200 Color Gloss Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search RockShox Model Year 25 keyword search RockShox MY25 Lockout Switch None Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Tapered Travel (mm) 170 Wheel Size 29" RockShox Domain Gold Isolator RC3 Suspension Fork Suspension Fork UPC: 710845904066 MPN: 00.4021.081.005

by RockShox

—$599

The RockShox Psylo 35mm platform delivers premium performance with the new flow-focused Isolator RC three-position damper, tunable DebonAir air spring, and Maxima Plush Dynamic Suspension Lube to keeps things running smooth. Psylo combines value and performance to bring capability and reliability to each and every ride. Isolator RC damper features a three-position compression adjustment (Open, Pedal, and Firm) with externally-adjustable Rebound providing superior traction, control, and confidence for the rider 35mm aluminum upper tube platform for functional stiffness and enhanced steering precision Premium bushings offer lower breakaway force and elevate this platform to feel silky smooth in rough terrain Highly tunable DebonAir air spring sits higher in the travel making the most of Psylo s travel and offers a smooth, consistent, coil-like feel throughout the stroke Highly tunable and Bottomless Token ready Short fender compatible (RockShox short fender included) Maxima Plush damping fluid reduces friction and quiets damper noise Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride Item Specifications Axle to Crown Length 552 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search RockShox Model Year 25 keyword search RockShox MY25 Lockout Switch None Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Type Tapered Travel (mm) 160 Wheel Size 27.5" RockShox Psylo Gold Isolator RC Suspension Fork Suspension Fork UPC: 710845906848 MPN: 00.4021.129.003

by RockShox

—$639

The RockShox Domain platform goes bigger than ever with the updated Domain Gold RC. Taking cues from ZEB, RockShox's decorated enduro fork, Domain combines value and performance. The new Isolator damper is the highlight of this fork, with a unique three-position solution that maximizes oil flow management across the full compression range. A burly 38mm chassis, top-of-the-line Maxima Plush Dynamic Suspension Lube, and RockShox's trusted DebonAir air spring round out Domain's rugged package Isolator RC damper features a three-position Compression adjustment (Open, Pedal, and Firm) with externally-adjustable Rebound providing superior traction, control, and confidence for the rider 38mm chassis for increased stiffness, perfect for mountain bikes and E-MTBs alike Highly tunable DebonAir air spring sits higher in the travel making the most of Domain s travel and offers a smooth, consistent, coil-like feel throughout the stroke Highly tunable and Bottomless Token ready Short fender compatible (RockShox short fender included) Maxima Plush damping fluid reduces friction and quiets rebound damper noise Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride Item Specifications Axle to Crown Length 567 Brake Type Post Mount 200 Color Gloss Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm keyword search RockShox Model Year 25 keyword search RockShox MY25 Lockout Switch None Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Tapered Travel (mm) 170 Wheel Size 27.5" RockShox Domain Gold Isolator RC3 Suspension Fork Suspension Fork UPC: 710845904028 MPN: 00.4021.081.001

by RockShox