Forks / Parts

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX 32 Float 2016+ with the FIT 4 and Grip dampers (Recommended for 100-130mm 26 , 27.5 and 29" forks) Not recommended for 80-90mm forks NOT compatible with 140-150mm forks or FOX 32 Step Cast forks New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224833

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX models: 34 Float 2016-2021forks (Recommended for 140-160mm 29 , 27.5+, and 27.5 forks), 34 Float 2022+ (130-140mm 29 forks, FOX 34 Step Cast 2019+ (Recommended for 110-120mm 29 forks) Also compatible with Marzocchi 2020 Z2 (Recommended for 140-160mm 29 , 27.5+, and 27.5 forks) Cartridges NOT compatible with TALAS forks New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224789

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX Models: FOX 36 Float 2018+ (Recommended for 140-180mm 29 , 27.5+, and 27.5 forks) Also compatible with Marzocchi Z1 (Air Only) 2019+ (All travel options) New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224741

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX 40 Float Factory 2016+ and FOX 40 Performance Elite 2016+ New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224796

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Model D (long body) is compatible with RockShox models: Pike 2015-2022 with "Boost" 15x110 axle spacing, Pike 2017+ (regardless of axle spacing), Revelation 2017-2022 (35mm) Recommended for 120 and 130mm 29 /27.5+ and 120mm 27.5 and 26 forks New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224819

by MRP

—$65.56

Replacement 20mm x 110mm DH Boost thru-axle for the Ohlins DH38 m.1 and m.2 Includes (2x) M6 x 16 bolts for axle clamp.Replacment thru-axle includes (2) M6 x 16 axle clamp bolts Ohlins Replacement Axle Axles & Axle Parts UPC: 840153640636

by Ohlins

—$250

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 160mm air spring cartridge for the RXF38 m.2 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup Ohlins Complete Air Spring Cartridge Assembly Air Springs & Parts UPC: 840153644696

by Ohlins

—$225.23

This air spring shaft kits are used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins. This 130mm air spring shaft kit is used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins The original fork's top cap is reused; only the shaft assembly is replaced The kit includes the lower shaft assembly, all dynamic air piston seals, new circlips, and a new footnut The air shaft has 4 negative volume spacers installed from the factory, which are adjustable to customize the level of support and suppleness in addition to the adjustable volume in the main spring Interchangeable with RXF34 chassis Ohlins Air Spring Shaft Assembly Air Springs & Parts UPC: 840153641404

by Ohlins

—$12.02

This kit includes four small, pellet-shaped volume spacers, used to adjust the negative air volume found in the air spring shaft in the Ohlins RXF34 m.1 fork. Remove the negative volumes spacers for a more supple off-the-top feeling. Add spacers to gain more initial support and tire feel. Allows riders to customize the feel of their Ohlins RXC34 m.1 air spring Includes (4) spacers Remove spacers for an easier breakaway force or add spacers to gain more support and tire feel Only works on the XC-specific air spring in the Ohlins RXC34 m.1 fork Ohlins Suspension Fork Air Spring Negative Volume Spacer Air Springs & Parts UPC: 840153641466

by Ohlins

—$225.23

This air spring shaft kits are used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins. This 110mm air spring shaft kit is used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins The original fork's top cap is reused; only the shaft assembly is replaced The kit includes the lower shaft assembly, all dynamic air piston seals, new circlips, and a new footnut The air shaft has 4 negative volume spacers installed from the factory, which are adjustable to customize the level of support and suppleness in addition to the adjustable volume in the main spring Interchangeable with RXF34 chassis Ohlins Air Spring Shaft Assembly Air Springs & Parts UPC: 840153641381

by Ohlins

—$225.23

This air spring shaft kits are used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins. This 100mm air spring shaft kit is used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins The original fork's top cap is reused; only the shaft assembly is replaced The kit includes the lower shaft assembly, all dynamic air piston seals, new circlips, and a new footnut The air shaft has 4 negative volume spacers installed from the factory, which are adjustable to customize the level of support and suppleness in addition to the adjustable volume in the main spring Interchangeable with RXF34 chassis Ohlins Air Spring Shaft Assembly Air Springs & Parts UPC: 840153641374

by Ohlins

—$225.23

This air spring shaft kits are used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins. This 120mm air spring shaft kit is used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins The original fork's top cap is reused; only the shaft assembly is replaced The kit includes the lower shaft assembly, all dynamic air piston seals, new circlips, and a new footnut The air shaft has 4 negative volume spacers installed from the factory, which are adjustable to customize the level of support and suppleness in addition to the adjustable volume in the main spring Interchangeable with RXF34 chassis Ohlins Air Spring Shaft Assembly Air Springs & Parts UPC: 840153641398

by Ohlins

—$306.34

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 200mm air spring cartridge for the DH38 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup Ohlins Complete Air Spring Cartridge Assembly Air Springs & Parts UPC: 840153640728

by Ohlins

—$250

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 180mm air spring cartridge for the RXF38 m.2 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup Ohlins Complete Air Spring Cartridge Assembly Air Springs & Parts UPC: 840153644719

by Ohlins

—$306.34

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 180mm air spring cartridge for the DH38 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup Ohlins Complete Air Spring Cartridge Assembly Air Springs & Parts UPC: 840153640735

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 100 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm 100 mm tube intended to convert RXF36 forks for dirt jumping Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640421

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 200mm air tube and 2 sealing o-rings ONLY for use in the Ohlins DH38 fork Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640445

by Ohlins

—$435

Designed for trail and enduro riding, the Bomber Z1 features the FIT GRIP damper, FLOAT EVOL air spring, and 36mm chassis to maximize traction and control. 36mm stanchions Enhanced lower leg stiffness with M arch design for maximum tire clearance 15 QR x 110mm Boost axle FIT GRIP damper with adjustable compression and rebound FLOAT EVOL air spring Item Specifications Axle to Crown Length 576 Brake Type Post Mount 180 Color Red Crown Race 40 Defined Color Red External Adjustments High Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Tube Length (mm) 263 Steerer Type Tapered Travel (mm) 180 Wheel Size 27.5" Marzocchi Bomber Z1 Suspension Fork Suspension Fork

by Marzocchi

—$198

The Ohlins coil spring kit for RXF38 suspension fork allows the rider to swap from the standard air spring to a coil spring setup. Due to the unique Ohlins air cartridge design, the fork can be exchanged between coil and air indefinitely. Experience the lower friction, initial suppleness, and lack of maintenance a coil spring offers. Two important notes: The actual spring IS NOT INCLUDED (Sold Separately). Requires Ohlins coil tool for installation (Sold Separately). Intended for DH38 fork series Kit includes the top cap with adjustable preload and the bottom coil shaft (Spring Sold Separately) Adjustable travel from 130 mm up to 180 mm Arrives from the factory set up in 170mm Allows riders to indefinitely swap between air and coil spring options Requires Ohlins coil tool for installation (Sold Separately) Ohlins RXF38 Coil Spring Kit Air Springs & Parts UPC: 840153642791

by Ohlins

—$214.14

Easily change your Ohlins RXF38 m.3 suspension fork travel by simply unthreading the footnut on the bottom, and using a cassette lockring tool, unthread the top cap which will pull the entire cartridge out of the fork. Replace with another cartridge, and the change is complete. Includes an entire air spring cartridge set to 140mm of travel Allows for easy and quick travel change Maximum stroke on RXF36 m.3 is 160mm for 29" wheel, and 170mm for 27.5" wheel version Ohlins RXF36 m.3 Suspension Fork Air Spring Cartridge Air Springs & Parts UPC: 840153640070

by Ohlins

—$214.14

Easily change your Ohlins RXF38 m.3 suspension fork travel by simply unthreading the footnut on the bottom, and using a cassette lockring tool, unthread the top cap which will pull the entire cartridge out of the fork. Replace with another cartridge, and the change is complete. Includes an entire air spring cartridge set to 140mm of travel Allows for easy and quick travel change Maximum stroke on RXF36 m.3 is 160mm for 29" wheel, and 170mm for 27.5" wheel version Ohlins RXF36 m.3 Suspension Fork Air Spring Cartridge Air Springs & Parts UPC: 840153640056

by Ohlins

—$214.14

Easily change your Ohlins RXF38 m.3 suspension fork travel by simply unthreading the footnut on the bottom, and using a cassette lockring tool, unthread the top cap which will pull the entire cartridge out of the fork. Replace with another cartridge, and the change is complete. Includes an entire air spring cartridge set to 140mm of travel Allows for easy and quick travel change Maximum stroke on RXF36 m.3 is 160mm for 29" wheel, and 170mm for 27.5" wheel version Ohlins RXF36 m.3 Suspension Fork Air Spring Cartridge Air Springs & Parts UPC: 840153640063

by Ohlins

—$434.50

hlins offers four different crown sets for DH38 suspension fork that differ in offset, allowing riders to further customize their ride. Offset is the distance between the wheel axle and the steerer tube and affects how the bike steers by changing the "trail" dimension. There are three different offsets: 46mm, 50mm, 54mm, and 58mm. Typically, shorter offsets are more stable but require more steering input to change direction. The opposite is true, too; the longer the offset, the easier it is to steer, but it will be less stable at speed. Most DH bikes with 29" wheels use 58mm and 54mm offset, while DH bikes with 27.5" front wheels use 46mm. Provides 46mm offset to DH38 suspension forks Includes one lower crown with a straight 1.125" steerer tube pressed in Includes two upper crowns; one flat, one drop crown Comes with two rubber fork bumpers M6 x 16 clamp bolts Black Anodized Finish Ohlins DH38 Suspension Fork Crownset Crown/Steerer/Uppertube Assembly UPC: 840153633485

by Ohlins

—$434.50

hlins offers four different crown sets for DH38 suspension fork that differ in offset, allowing riders to further customize their ride. Offset is the distance between the wheel axle and the steerer tube and affects how the bike steers by changing the "trail" dimension. There are three different offsets: 46mm, 50mm, 54mm, and 58mm. Typically, shorter offsets are more stable but require more steering input to change direction. The opposite is true, too; the longer the offset, the easier it is to steer, but it will be less stable at speed. Most DH bikes with 29" wheels use 58mm and 54mm offset, while DH bikes with 27.5" front wheels use 46mm. Provides 58mm offset to DH38 suspension forks Includes one lower crown with a straight 1.125" steerer tube pressed in Includes two upper crowns; one flat, one drop crown Comes with two rubber fork bumpers M6 x 16 clamp bolts Black Anodized Finish Ohlins DH38 Suspension Fork Crownset Crown/Steerer/Uppertube Assembly UPC: 840153633515

by Ohlins

—$1,567.50

Unleash the next level of racing performance with the latest innovation in Ohlins front suspension - the RXC34 m.1 carbon unicrown fork. Equipped with their race proven floating axle design, the RXC34 m.1 features a chassis with a stiff, yet lightweight aluminum with carbon unicrown construction for precise steering and predictable performance. This is their lightest racing version of the carbon unicrown fork, limited to 100 mm of travel, saving an additional 20 g of weight. Like the aluminum version, the carbon unicrown RXC34 m.1 features an all-new damper and updated air spring, further enhancing speed and control on technical cross-country tracks. As part of the hlins XC suspension system, the RXC34 m.1 features a rider-friendly system for adjusting air spring progressiveness and stroke. And with their race-proven setting bank, you'll be able to fine-tune the fork to your unique riding style and bike linkage. This RXC34 m.1 manual version offers 3 ride modes, rebound, and 10 clicks of low-speed compression in the open mode Uses the new XC-optimized OTX14 damper that's been extensively designed to provide a slim, lightweight damper packed with technology Highly adjustable with race-proven setting bank to match riding style and bike Two-chamber air spring feature a large negative air chamber balanced with the damper s characteristics in the three different ride modes open, pedal, and lockout Up to 5 positive volume spacers to adjust progressiveness (depending on travel) Up to 7 negative spacers to adjust initial sensitivity Creates the initial movement required for superior traction while retaining best-in-class, predictable support when pushing hard 15mm x 110mm boost floating thru-axle axle design to minimize friction Item Specifications Axle to Crown Length 531 Brake Type Post Mount 180 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Type Tapered Travel (mm) 120 Weight 1476 Wheel Size 29" Ohlins RXC34 m.1 Suspension Fork with Carbon Unicrown Suspension Fork UPC: 840153633614

by Ohlins

—$1,842.50

New DH38 m.2 coil sprung suspension fork with features reworked internals and updated settings, built around the race-proven TTX18 cartridge. This powerful fork is the ultimate downhill weapon, delivering hard-hitting performance through its dual-crown design. The new DH38 m.2 fork is the most advanced downhill fork Ohlins has ever created, offering improvements in comfort, sensitivity, and bottom-out control. Bottom-out progressiveness has been increased with the addition of a spring booster, and the system is further optimized for use with volume spacers, giving riders greater flexibility to fine-tune their ride feel. With these upgrades, the new DH38 m.2 is the ultimate fork for gravity riders charging down the steepest lines and attacking the most demanding courses-engineered to push harder, land bigger, and inspire full confidence. Four separately sold DH Crowns, you can choose from 46-, 50-, 54-, or 58-mm offset options to match your setup and preferred riding style Independent cartridge spring and damper systems Coil-sprung for maximum suppleness and reliability Cartridge-based spring system allows for quick swaps between Coil and Air setups when needed (air spring cartridge sold separatelty) Race-proven setting bank that features 3 HSC Clicks, 16 LSC Clicks and 16 LSR Clicks New surface treatment on the 38mm stanchions improves small-bump sensitivity and overall ride smoothness and also reduces wear for long-term performance 20 x 110 Boost floating thru-axle set up for minimum friction Compatible with 29" and 27.5" wheels eMTB compatible Item Specifications Brake Type Post Mount 200 Color Gloss Black Crown Race 30 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 20mm Thru x 110mm Boost Lockout Switch Crown Maximum Tire Width 71 Negative Spring Coil Positive Spring Coil S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Straight Travel (mm) 200 Wheel Size 27.5" Wheel Size 29" Ohlins DH38 m.2 Coil Suspension Fork Suspension Fork UPC: 840153644351

by Ohlins

—$1,567.50

Unleash the next level of racing performance with the latest innovation in Ohlins front suspension - the RXC34 m.1 carbon unicrown fork. Equipped with their race proven floating axle design, the RXC34 m.1 features a chassis with a stiff, yet lightweight aluminum with carbon unicrown construction for precise steering and predictable performance. This is their lightest racing version of the carbon unicrown fork, limited to 100 mm of travel, saving an additional 20 g of weight. Like the aluminum version, the carbon unicrown RXC34 m.1 features an all-new damper and updated air spring, further enhancing speed and control on technical cross-country tracks. As part of the hlins XC suspension system, the RXC34 m.1 features a rider-friendly system for adjusting air spring progressiveness and stroke. And with their race-proven setting bank, you'll be able to fine-tune the fork to your unique riding style and bike linkage. This RXC34 m.1 remote version (remote sold separately) offers 3 ride modes and 16 clicks of rebound adjustment Remote connection is designed for 7.5 mm of wire pull per position which means you can use the shock with remote levers from other top brands Uses the new XC-optimized OTX14 damper that's been extensively designed to provide a slim, lightweight damper packed with technology Highly adjustable with race-proven setting bank to match riding style and bike Two-chamber air spring feature a large negative air chamber balanced with the damper s characteristics in the three different ride modes open, pedal, and lockout Creates the initial movement required for superior traction while retaining best-in-class, predictable support when pushing hard 15mm x 110mm boost floating thru-axle axle design to minimize friction Item Specifications Axle to Crown Length 531 Brake Type Post Mount 180 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Remote Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Type Tapered Travel (mm) 120 Weight 1496 Wheel Size 29" Ohlins RXC34 m.1 Suspension Fork with Carbon Unicrown Suspension Fork UPC: 840153633607

by Ohlins

—$1,567.50

Unleash the next level of racing performance with the latest innovation in Ohlins front suspension - the RXC34 m.1 carbon unicrown fork. Equipped with their race proven floating axle design, the RXC34 m.1 features a chassis with a stiff, yet lightweight aluminum with carbon unicrown construction for precise steering and predictable performance. This is their lightest racing version of the carbon unicrown fork, limited to 100 mm of travel, saving an additional 20 g of weight. Like the aluminum version, the carbon unicrown RXC34 m.1 features an all-new damper and updated air spring, further enhancing speed and control on technical cross-country tracks. As part of the hlins XC suspension system, the RXC34 m.1 features a rider-friendly system for adjusting air spring progressiveness and stroke. And with their race-proven setting bank, you'll be able to fine-tune the fork to your unique riding style and bike linkage. This RXC34 m.1 remote version (remote sold separately) offers 3 ride modes and 16 clicks of rebound adjustment Remote connection is designed for 7.5 mm of wire pull per position which means you can use the shock with remote levers from other top brands Uses the new XC-optimized OTX14 damper that's been extensively designed to provide a slim, lightweight damper packed with technology Highly adjustable with race-proven setting bank to match riding style and bike Two-chamber air spring feature a large negative air chamber balanced with the damper s characteristics in the three different ride modes open, pedal, and lockout Creates the initial movement required for superior traction while retaining best-in-class, predictable support when pushing hard 15mm x 110mm boost floating thru-axle axle design to minimize friction Item Specifications Axle to Crown Length 511 Brake Type Post Mount 180 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Remote Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Type Tapered Travel (mm) 100 Weight 1476 Wheel Size 29" Ohlins RXC34 m.1 Suspension Fork with Carbon Unicrown Suspension Fork UPC: 840153633553

by Ohlins

—$1,369.50

The RXF36 m.3 features an all-new chassis built around the race-proven TTX18 damper cartridge. This lightweight and highly progressive fork is fully optimized for demanding, next-level trail riding performance. The Ohlins race-winning TTX18 damping technology from the DH38 Race Fork has been adapted to deliver its renowned top-tier traction and control on the most demanding trails. The updated settings and reduced chassis friction offers improved sensitivity for greater traction and comfort to conquer any trail~With the new chassis, the fork delivers ultra-sensitive tracking over small bumps while maintaining Ohlins' signature precise steering and predictable handling-no matter how long or hard it's pushed. RXF36 m.3 features increased internal bushing overlap and an optimized configuration for 29 wheels Race-proven adjustment range is specifically designed for tough trails and provides 16 clicks of low-speed compression, 3 clicks of high-speed compression, and 16 clicks of rebound adjustment Features Ohlins' floating axle design for minimal friction and weighs 2050 g (with bolts and axle) The retuned, twin piston, three chamber air-spring system allows you to completely dial-in the level of progression from the initial movement, right through to the bottom out Air spring is cartridge-based, allowing for easy swaps between coil and air if desired (coil cartridge sold separately) New surface treatment on the 36mm stanchions lowers the friction, boosts small bump sensitivity and overall ride smoothness Updated lowers feature a gloss black finish and bold new graphics, ensuring riders can feel and see the next level of performance every time they hit the trail or park 15mm x 110mm boost floating thru-axle axle design to minimize friction eMTB approved Item Specifications Axle to Crown Length 563 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Type Tapered Travel (mm) 150 Weight 2050 Wheel Size 29" Ohlins RXF36 m.3 Suspension Fork Suspension Fork UPC: 840153642883

by Ohlins

—$1,369.50

The RXF36 m.3 features an all-new chassis built around the race-proven TTX18 damper cartridge. This lightweight and highly progressive fork is fully optimized for demanding, next-level trail riding performance. The Ohlins race-winning TTX18 damping technology from the DH38 Race Fork has been adapted to deliver its renowned top-tier traction and control on the most demanding trails. The updated settings and reduced chassis friction offers improved sensitivity for greater traction and comfort to conquer any trail~With the new chassis, the fork delivers ultra-sensitive tracking over small bumps while maintaining Ohlins' signature precise steering and predictable handling-no matter how long or hard it's pushed. RXF36 m.3 features increased internal bushing overlap and an optimized configuration for 29 wheels Race-proven adjustment range is specifically designed for tough trails and provides 16 clicks of low-speed compression, 3 clicks of high-speed compression, and 16 clicks of rebound adjustment Features Ohlins' floating axle design for minimal friction and weighs 2050 g (with bolts and axle) The retuned, twin piston, three chamber air-spring system allows you to completely dial-in the level of progression from the initial movement, right through to the bottom out Air spring is cartridge-based, allowing for easy swaps between coil and air if desired (coil cartridge sold separately) New surface treatment on the 36mm stanchions lowers the friction, boosts small bump sensitivity and overall ride smoothness Updated lowers feature a gloss black finish and bold new graphics, ensuring riders can feel and see the next level of performance every time they hit the trail or park 15mm x 110mm boost floating thru-axle axle design to minimize friction eMTB approved Item Specifications Axle to Crown Length 573 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Type Tapered Travel (mm) 160 Weight 2050 Wheel Size 29" Ohlins RXF36 m.3 Suspension Fork Suspension Fork UPC: 840153642890

by Ohlins

—$1,309

Designed for riders who cover lots of ground-FAST. The new fork replaces the original RXF34, and offers a short-travel 120-130mm setup optimized for lightweight 29er trail bikes. Weighing in at just 1698g, the fork boasts a brand new air spring and damper adapted for the demands of the emerging riding style, while still carrying all the hallmarks of O hlins' race-proven performance suspension seen from its long-travel, single-crown cousins-the RXF36 m.2 & RXF38 m.2. The RXF34 m.2 uses the newly designed OTX18 damper which purpose-built for lightweight trail bikes. The new damper is paired with a robust yet lightweight air spring that features a positive and self-adjusting negative chamber. With a flex pattern tailored for lightweight trail riding, the RXF34 m.2's super-stiff chassis delivers point-and-shoot precision steering. OTX18 damper shares several key components with its bigger TTX18 brother, but weighs 27% less and is optimized for faster and more fluid trail riding, striking the optimal balance between traction, control, weight and stiffness Trail-optimized OTX18 damper offers impressive adjustability for fine-tuning, with fifteen clicks of low-speed compression and rebound adjustment alongside three for tweaks to high-speed compression Lightweight air spring features a positive chamber that allows riders to tune the spring curve according to their needs using hlins easy-to-use volume spacer system Negative chamber of the lightweight air spring has been designed for fast trail riding and provides a plush initial feel and superb small bump sensitivity, while the spring s surface and seals also minimize friction and breakaway force to enhance the fork s smooth ride feel Race-proven chassis design has been achieved via a closed-end outer tube design to increase stiffness, impact resistance and the volume of the lower legs to give the rider more power to fine-tune performance to their liking for greater confidence and control 15mm x 110mm boost floating thru-axle axle design to minimize friction eMTB approved Item Specifications Axle to Crown Length 541 Brake Type Post Mount 180 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Type Tapered Travel (mm) 130 Wheel Size 29" Ohlins RXF34 m.2 Suspension Fork Suspension Fork UPC: 840153623035

by Ohlins

—$1,534.50

The new RXF38 m.3 features reworked internals and updated settings, built around the race-proven TTX18 damper cartridge. This stiff fork is the perfect match for e-MTBs, aggressive trail riding and enduro racing, delivering significant performance upgrades on every ride. The new RXF38 m.3 fork delivers hard-hitting, dual-crown downhill performance in a single-crown design, with improvements in comfort, sensitivity, and bottom-out control. Bottom-out progressiveness has been increased with the addition of a spring booster, and the system is further optimized for use with volume spacers, giving riders greater flexibility to fine-tune their ride feel. With these upgrades, the new RXF38 m.3 fork is the most advanced trail fork Ohlins has ever created and your top choice when the trails get steeper, the rock gardens rougher, and the gaps bigger. The RXF38 m.3 s adjustment range provides 16 clicks of low-speed compression, 3 clicks of high-speed compression, and 16 clicks of rebound adjustment Cartridge-based air spring allows for quick swaps between air and coil setups when needed (coil cartridge sold separately) Features Ohlins floating axle design to minimize friction and weighs 2,320 g (with bolts and axle) For 29 wheel sized frames New surface treatment on the 38mm stanchions improves small-bump sensitivity and overall ride smoothness in the new RXF38 m.3 Updated lowers feature a gloss black finish and bold new graphics, ensuring riders can both feel and see the next level of performance every time they hit the trail or park 15mm x 110mm boost floating thru-axle axle design to minimize friction eMTB approved Item Specifications Axle to Crown Length 583 Brake Type Post Mount 200 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Tapered Travel (mm) 170 Weight 2320 Wheel Size 29" Ohlins RXF38 m.3 Suspension Fork Suspension Fork UPC: 840153644375

by Ohlins

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with Base, R, RC, Select, Select +, and Ultimate versions of RockShox models: RockShox Pike (B1+, NOT C1+) Lyrik (B1+, C1+, and D1+), Yari (B1+), Revelation (A1+) Boost fork models ONLY and ONLY those within compatible travel range (140-170mm) Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Yellow Tune (140-180 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225151

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with FOX 36 (2018-2025) and Marzocchi Z1 (36mm version, 2019+ with a Max travel of 170mm For use with 29" wheel ONLY Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Yellow Tune (140-180 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225120

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with Base, R, RC, Select, Select +, and Ultimate versions of RockShox model: RockShox Zeb (A1+) ONLY compatible those in the travel range of (150-180mm) Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Blue Tune (200-240 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225229

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with Base, R, RC, Select, Select +, and Ultimate versions of RockShox model: RockShox Zeb (A1+) ONLY compatible those in the travel range of (150-180mm) Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Yellow Tune (140-180 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225205

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with Base, R, RC, Select, Select +, and Ultimate versions of RockShox models: RockShox Pike (B1+, NOT C1+) Lyrik (B1+, C1+, and D1+), Yari (B1+), Revelation (A1+) Boost fork models ONLY and ONLY those within compatible travel range (140-170mm) Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Green Tune (170-210 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225168

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with Base, R, RC, Select, Select +, and Ultimate versions of RockShox models: RockShox Pike (B1+, NOT C1+) Lyrik (B1+, C1+, and D1+), Yari (B1+), Revelation (A1+) Boost fork models ONLY and ONLY those within compatible travel range (140-170mm) Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Blue Tune (200-240 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225168

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with Base, R, RC, Select, Select +, and Ultimate versions of RockShox model: RockShox Zeb (A1+) ONLY compatible those in the travel range of (150-180mm) Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Green Tune (170-210 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225212

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with FOX 38 (2021+) with a Max travel of 180mm Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Blue Tune (200-240 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225137

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with FOX 36 (2018-2025) and Marzocchi Z1 (36mm version, 2019+ with a Max travel of 170mm For use with 29" wheel ONLY Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Blue Tune (200-240 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225021

by MRP

—$419.95

Lift V2 offers a wider range of damping adjustments than the top mainstream dampers, with internal valving finely tuned to match your weight. Unlike stock dampers that often add unnecessary controls - which provide more placebo effect than actual damping improvement - Lift V2 focuses on delivering exceptional performance right out of the box. You can quickly fine-tune your setup with simple yet powerful singular compression and rebound dials, ensuring your ride is dialed to perfection. Compatible with FOX 38 (2021+) with a Max travel of 180mm Features a spring-backed, low-friction Chocoluxe IFP for volume compensation, rider-matched compression valving, and a 12-position low-speed compression adjustment Utilizes the latest low-friction bushing material from industry-leader Igus and also features just a single major dynamic seal to make Lift V2 distinctly smooth Lift V2 features a 12-click, fine-tunable low-speed compression adjustment with a firm "closed" setting that's perfect for mashing back to the top to rip another descent Compared to top mainstream dampers, Lift V2 Dampers offer greater external tunability in addition to being internally tuned to your weight (Yellow Tune (140-180 lbs) Comes pre-bled and dyno-verified for optimal performance, ready to be installed by most home mechanics in just minutes with no specialty tools required Strong maximum compression damping levels are maintained while significantly increasing flow at the minimum setting to create a lighter feel at the open end of the range and offers greater overall tunability MRP Lift V2 Damper Upgrade Kit Damper, Compression UPC: 702430225007

by MRP

—$692.95

The Ritchey WCS Carbon Mountain Adventure Fork features rack mounts for your gear, a fender mount, and three multi-purpose mounts on the fork blades for stowing essentials. Should you be tempted to cycle the world or session on local trails, the Mountain Adventure Fork is suspension corrected for hardtail frames like the Ritchey P-29er or Ultra. Fast, lightweight, and comfortable, this fork is for sharpening your singletrack skills or going the (ultra) distance. Premium carbon fiber with a matte UD carbon finish Tapered steerer with an integrated 45-degree crown race Features multi-purpose mounts on the fork blades (includes black stainless-steel bolts), fender mounts, threaded front and rear crown mounts and dynamo cable internal routing Post Mount disc brake compatibility 160mm and 180mm (max) disc brake rotor compatibility Fork has a maximum 3kg payload per side Item Specifications Axle to Crown Length 483 Brake Mount (Fork) Post Mount 160 Color Matte Carbon Crown Race 40 Defined Color Carbon Front Axle 15mm Thru x 110mm Material Carbon Max Rotor Size (Fork) 180 Maximum Tire Clearance (Fork) 61 Offset 50 S.H.I.S. Stem Clamp Diameter 28.6 Steerer Tube Length (mm) 300 Steerer Type Tapered Weight 565 Wheel Size 27.5" Wheel Size 29" Ritchey WCS Carbon Mountain Adventure Fork Rigid Mountain Fork UPC: 796941340885

by Ritchey

—$659.95

Designed specifically for the demands of long-distance travel, the WCS Carbon Brevet Road Fork lets you ride for days without being bounded by light or dark. Mounting options for either a porteur or lowrider rack promote self-supported randonneuring, while internal dynamo routing helps prove that it's not always darkest before dawn. With ample clearance for 700 x 40c tires without fenders - or 700 x 36c with - the Brevet Fork features a comfort-inducing 1-1/8" straight steerer for a precise yet forgiving ride experience. Threaded drilling in the crown allows for installing rack lights powered by a dynamo hub. Premium carbon fiber with a matte UD carbon finish Straight steerer with an integrated 45-degree crown race Features rack and fender mounts, threaded front and rear crown mounts, dynamo cable internal routing and porteur or low-rider rack mounts Flat Mount disc brake compatibility 140mm and 160mm disc brake rotor compatibility Fork has a maximum 3kg payload per side Item Specifications Axle to Crown Length 388 Brake Mount (Fork) Flat Mount 140 Color Matte Carbon Crown Race 30.0 Defined Color Carbon Front Axle 12mm Thru x 100mm Material Carbon Max Rotor Size (Fork) 160 Maximum Tire Clearance (Fork) 40 Offset 48 S.H.I.S. Stem Clamp Diameter 28.6 Steerer Tube Length (mm) 300 Steerer Type Straight Weight 350 Wheel Size 700c Ritchey WCS Carbon Brevet Road Fork Road Fork UPC: 796941340892

by Ritchey

—$1,199.99

Invert smoothes your ride and gives unbelievable control of your bike on rough roads, loose turns, and steep descents. It's surprisingly lightweight, easy to use, and strikingly attractive. Riding beyond the pavement can be rough, physically taxing, and unpredictable. Invert goes straight to the source of this problem to offer a smoother ride with more traction, both uphill and down. With Invert, you'll be more efficient, more relaxed, and have confidence to glide over gravel like you've never experienced before. Inverted design promotes smoothest possible operation, lightest weight, & cleanest visual integration by using a layout opposite to conventional suspension forks Features Climb Switch that engages a firm setting for out of the saddle pedaling Gravel-Specific tuned, progressive air spring balances traction with the right amount of support and is fully adjustable for rider weight (Max Weight: 350 lb / Max PSI: 250 psi) Premium carbon fiber crown and steerer is bonded to aluminum upper tubes to provide an incredibly strong and lightweight fork (1113 g) Flat-Mount disc for 160mm rotor (Mounting bolts included) Integrated 36 degree angle crown race Included with fork: Ancora Premium Expansion Plug, 52mm ZN40 headset bearing, Brake caliper mounting bolts, and Thru-Axle Hand-built in Fletcher, NC Item Specifications Axle to Crown Length 435 Brake Type Flat Mount Color Cane Creek Blue Crown Race 40 Crown Race Integrated Defined Color Blue Front Axle 12mm Thru x 100mm Lockout Switch Climb Switch Maximum Tire Width 50 Negative Spring Air Offset 45 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 30 Steerer Tube Length (mm) 300 Steerer Type Tapered Travel (mm) 40 Weight 1113 Wheel Size 700c Cane Creek Invert Gravel Suspension Fork Suspension Fork UPC: 840226070520

by Cane Creek

—$1,099.99

The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness. Compression and midvalve circuit offer increased support and control SKF oil seal head cartridge and wiper seals are low friction The redesigned air spring offers increased air volume for better traction and suppleness The threadless air seal head allows for easier travel change Damping features include: high speed compression, low speed compression, and low speed rebound Adjustment options include: high speed compression (10 positions), low speed compression (17 positions), Low speed rebound (10 positions), independent positive air spring, independent negative air spring, and an indexed travel system (8 positions) Double-Air spring system: high volume positive and negative air springs "D-Loc" 15mm bolt-on thru axle Item Specifications Axle to Crown Length 573 Brake Type Post Mount 180 Color Black/Purple Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Maximum Tire Width 65 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 265 Steerer Type Tapered Travel (mm) 160 Weight 2080 Wheel Size 29" Cane Creek Helm MKII Air Suspension Fork Suspension Fork UPC: 840226035147

by Cane Creek

—$1,199

The most versatile fork in the RockShox lineup, Lyrik Ultimate harmonizes descending power with effortless efficiency. Lyrik's legendary performance enters a new era with the Charger 3.1 RC2 damper that offers a wider tunable range of adjustments for the perfect suspension action. Lyrik Ultimate packs an orchestra of industry-leading tech like the ButterCups technology and a DebonAir+ air spring in a stout 35mm chassis. Now better than ever, Lyrik is ready to push your limits. Charger 3.1 is the evolution of SRAM's proven damper platform that offers increased damping range, High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments for a smoother ride Charger 3.1 RC2 s adjustment range is broader with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day ButterCups block 20% of high-frequency vibrations and massively reduces hand and arm fatigue DebonAir+ air spring is built to provide a balance of a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride Lightweight machined and anodized crown for premium looks and durability Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel Item Specifications Axle to Crown Length 561 Brake Type Post Mount 180 Color Electric Red Crown Race 40 Defined Color Red External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 81 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 265 Steerer Type Tapered Travel (mm) 150 Weight 2028 Wheel Size 29" RockShox Lyrik Ultimate Charger 3.1 RC2 Suspension Fork Suspension Fork UPC: 710845917066

by RockShox

—$1,099

Climb mountains. Charge descents. The RockShox SID Ultimate isn't like other XC forks. It is lighter than ever with a formidable 35mm chassis that holds the line when you're on the edge. The Race Day 2 damper provides efficient Pedal positions, all at your fingertips. SID Ultimate adapts to everything from full-gas cross-country to sporty backcountry loops thanks to a new, higher-volume DebonAir+ spring that's supple at the top of its travel with tons of tunability. 35mm chassis is the perfect blend of light weight and rigidity for the modern XC bike Charger Race Day 2 2P damper is one of the lightest damper on the market and features two-position compression adjustment: Open or a rock-solid Lock (Remote sold separate) DebonAir+ provides more small-bump sensitivity and tunable mid-stroke support Bushing package maximizes bushing overlap for a smooth, solid ride Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride Crown machined to shave weight without compromising strength and stiffness Bolt-in torque cap adapters included for use with standard hub end-caps 2 pos remote TwistLoc/OneLoc (10mm Cable Pull sold separately) Item Specifications Axle to Crown Length 531 Brake Type Post Mount 180 Color Electric Red Crown Race 40 Defined Color Red External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 35 Steerer Tube Length (mm) 230 Steerer Type Tapered Travel (mm) 120 Weight 1480 Wheel Size 29" RockShox SID Ultimate Race Day 2 Suspension Fork Suspension Fork UPC: 710845915192

by RockShox

—$929

Gravel riders who want to get wild choose the RockShox Rudy XPLR. It's efficient for days of triple-digit mileage while delivering control and comfort when things get rough. Rudy rides on the superlight Charger Race Day 2 damper with 2-position Compression adjustment: Open and a rock-solid, sprint-ready Lock. Rudy offers precise steering with its 30mm chassis and compatibility for full or short fenders. Gravel riding keeps evolving-isn't it time to ride a fork that's on the cutting edge? Charger Race Day 2 Damper every detail perfected, every extra ounce shaved away, is RockShox's lightest performance-driven damper and features 2 Compression positions: Open or a rock-solid Lock Solo Air spring is specifically tuned for short travel Machined and anodized aluminum crown is exceptionally lightweight and durable Maxima Plush Dynamic Lower Leg Lube reduces friction and enhances fork performance ride after ride 3-bolt mounts to fit a short fender (RockShox fender included) Full fender compatibility using custom stealth stay bosses (sold separately) Maxima Plush damping fluid reduces friction and silences damper noise Fits up to 700x50 tires Item Specifications Axle to Crown Length 435 Brake Type Post Mount 160 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 12mm Thru x 100mm Lockout Switch Crown Maximum Tire Width 50 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 30 Steerer Type Tapered Travel (mm) 40 Wheel Size 700c RockShox RUDY Ultimate XPLR Race Day 2 Suspension Fork Suspension Fork UPC: 710845918681

by RockShox

—$929

Gravel riders who want to get wild choose the RockShox Rudy XPLR. It's efficient for days of triple-digit mileage while delivering control and comfort when things get rough. Rudy rides on the superlight Charger Race Day 2 damper with 2-position Compression adjustment: Open and a rock-solid, sprint-ready Lock. Rudy offers precise steering with its 30mm chassis and compatibility for full or short fenders. Gravel riding keeps evolving-isn't it time to ride a fork that's on the cutting edge? Charger Race Day 2 Damper every detail perfected, every extra ounce shaved away, is RockShox's lightest performance-driven damper and features 2 Compression positions: Open or a rock-solid Lock Solo Air spring is specifically tuned for short travel Machined and anodized aluminum crown is exceptionally lightweight and durable Maxima Plush Dynamic Lower Leg Lube reduces friction and enhances fork performance ride after ride 3-bolt mounts to fit a short fender (RockShox fender included) Full fender compatibility using custom stealth stay bosses (sold separately) Maxima Plush damping fluid reduces friction and silences damper noise Fits up to 700x50 tires Item Specifications Axle to Crown Length 425 Brake Type Post Mount 160 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 12mm Thru x 100mm Lockout Switch Crown Maximum Tire Width 50 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 30 Steerer Type Tapered Travel (mm) 30 Wheel Size 700c RockShox RUDY Ultimate XPLR Race Day 2 Suspension Fork Suspension Fork UPC: 710845918698

by RockShox