—$463.50

You want World Champion winning performance in your current fork? No problem, our Öhlins DH race drop in damper and air spring system available for RockShox BoXXer downhill forks. Öhlins TTX 18 cartridge kit featuring downhill-optimized 18 mm piston for improved small bump sensitivity. Increased damping pressure bandwidth to achieve improvements in damping valve response and sensitivity. The adjustment range specifically for gravity use both race and park. 15 clicks of low-speed compression and low-speed rebound and 5 clicks of high-speed compression. Twin piston three-chamber air spring system, isolated from the upper tubes to reduced head build up and featuring Total Tune Spring Curve System (TTSC) allowing total air spring tuning from the initial movement through to the bottom out. Features: TTX-technology Independent damper system Ohlins TTX Air Springs & Parts

by Ohlins

—$1,190

The RXF34 m.2 uses the newly-designed OTX18 damper. Sprung out of the highly successful TTX18 found in the Öhlins downhill and trail forks, the OTX18 is purpose-built for lightweight trail bikes. It shares several key components with its bigger TTX18 brother, but weighs 27% less and is optimized for faster and more fluid trail riding, striking the optimal balance between traction, control, weight and stiffness. Like all Öhlins dampers, the OTX18 offers impressive adjustability for fine-tuning, with fifteen clicks of low-speed compression and rebound adjustment alongside three for tweaks to high-speed compression. As always, a large and extensively-tested setting bank is also available for those who wish to customize their ride feel even further. Designed for riders who cover lots of ground - FAST. The new fork replaces the original RXF34, and offers a short-travel 120-130mm setup optimized for lightweight 29er trail bikes. Weighing in at just 1698g, the fork can boast of a brand new air spring and damper adapted for the demands of the emerging “downcountry” riding style, while still carrying all the hallmarks of Öhlins’ race-proven performance suspension seen from its long-travel, single-crown cousins - the RXF36 m.2 & RXF38 m.2. Features: OTX18 Trail Optimized Damper 34 mm stanchions 15 clicks of low-speed compression adjustment 15 clicks of rebound adjustment 3 clicks of high-speed compression adjustment, climb mode in 4th position Maximum tire size: 29x2.6” Weight: 1698g without volume spacers Axle to crown: 541mm @ 130mm stroke Ohlins RXF34 m.2 Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$1,395

The RXF38 m.2 delivers hard-hitting dual-crown downhill performance to the single-crown scene. The brand new RXF38 m.2 is available for 29” bikes, with five different iterations offering a range of 160-180mm travel, and 44 and 51mm crown offset options built around Öhlins signature TTX18 damper and unique three-chamber air spring. Developed for hard-hitting trail, enduro and e-MTB use, the RXF38 m.2 shares several key technologies with its dual-crown brother, the DH38. The newcomer to the Öhlins lineup brings 38mm stanchions to the brand’s single crown range, a chassis optimized for big-hit trail riding, confidence-inspiring TTX damping and unrivalled adjustability. It’s the product of Öhlins long-term close collaboration with the UCI DH World Championship-winning team Specialized Gravity, where milliseconds gained make for wins. The fork’s re-tuned twin-piston and three-chamber air spring system allow for comprehensive, simple and tool-free air spring tuning from the initial movement right through to the bottom out. And much like the World Cup-winning DH38 m.1, the RXF38 m.2 benefits from a huge range of intuitive adjustments. Riders can easily fine-tune the fork’s performance to suit any terrain, thanks to 15 clicks of low-speed compression and low-speed rebound damping and 3 clicks of high-speed compression adjustment, in addition to a climb mode setting. Setup is simple then, but for those who want to go even further, and adjust their fork like the pros, a race-proven setting bank is also available at Öhlins service centers for even more fine-tuning. The fork’s overhauled chassis and uncompromisingly stiff 38mm stanchions are complemented by Öhlins signature TTX18 damping system. Adopted from its DH38 m.1 big brother and adapted to fit a single-crown platform, the TTX18 damping system offers world-class, race-proven performance. Its increased damping pressure bandwidth enables improved damping valve response, with a trail-optimized 18mm piston providing superb small bump sensitivity to keep tires planted over technical terrain. When it comes to bumps of the bigger variety, the fork’s highly capable air spring and TTX18 damper combine to swallow roots and rocks whole, maintaining speed and grip on the toughest lines. Between the big hits, the RXF38 m.2 makes light work of servicing too. Courtesy of Öhlins simple service kit – compatible across the RXF and DH range – the RXF38 m.2 can be maintained factory fresh year after year, so you can focus on the riding. Features: TTX18 damping system Independent cartridge air spring and damper systems Air spring adjustable to 160/170/180 mm of travel 38 mm stanchion diameter with both 44mm and 51mm crown offsets Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 Floating axle design to minimize friction Approved for eMTB use and available with eMTB compatible crowns Compatible with maximum tire sizes up to 29”x2.6 Compatible with maximum rotor sizes up to 220mm, optimised for 200mm. Axle to crown measurement: 583mm @ 170mm stroke Weight: from 2320 grams Ohlins RXF38 m.2 Suspension Fork

by Ohlins

—$1,395

The RXF38 m.2 delivers hard-hitting dual-crown downhill performance to the single-crown scene. The brand new RXF38 m.2 is available for 29” bikes, with five different iterations offering a range of 160-180mm travel, and 44 and 51mm crown offset options built around Öhlins signature TTX18 damper and unique three-chamber air spring. Developed for hard-hitting trail, enduro and e-MTB use, the RXF38 m.2 shares several key technologies with its dual-crown brother, the DH38. The newcomer to the Öhlins lineup brings 38mm stanchions to the brand’s single crown range, a chassis optimized for big-hit trail riding, confidence-inspiring TTX damping and unrivalled adjustability. It’s the product of Öhlins long-term close collaboration with the UCI DH World Championship-winning team Specialized Gravity, where milliseconds gained make for wins. The fork’s re-tuned twin-piston and three-chamber air spring system allow for comprehensive, simple and tool-free air spring tuning from the initial movement right through to the bottom out. And much like the World Cup-winning DH38 m.1, the RXF38 m.2 benefits from a huge range of intuitive adjustments. Riders can easily fine-tune the fork’s performance to suit any terrain, thanks to 15 clicks of low-speed compression and low-speed rebound damping and 3 clicks of high-speed compression adjustment, in addition to a climb mode setting. Setup is simple then, but for those who want to go even further, and adjust their fork like the pros, a race-proven setting bank is also available at Öhlins service centers for even more fine-tuning. The fork’s overhauled chassis and uncompromisingly stiff 38mm stanchions are complemented by Öhlins signature TTX18 damping system. Adopted from its DH38 m.1 big brother and adapted to fit a single-crown platform, the TTX18 damping system offers world-class, race-proven performance. Its increased damping pressure bandwidth enables improved damping valve response, with a trail-optimized 18mm piston providing superb small bump sensitivity to keep tires planted over technical terrain. When it comes to bumps of the bigger variety, the fork’s highly capable air spring and TTX18 damper combine to swallow roots and rocks whole, maintaining speed and grip on the toughest lines. Between the big hits, the RXF38 m.2 makes light work of servicing too. Courtesy of Öhlins simple service kit – compatible across the RXF and DH range – the RXF38 m.2 can be maintained factory fresh year after year, so you can focus on the riding. Features: TTX18 damping system Independent cartridge air spring and damper systems Air spring adjustable to 160/170/180 mm of travel 38 mm stanchion diameter with both 44mm and 51mm crown offsets Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 Floating axle design to minimize friction Approved for eMTB use and available with eMTB compatible crowns Compatible with maximum tire sizes up to 29”x2.6 Compatible with maximum rotor sizes up to 220mm, optimised for 200mm. Axle to crown measurement: 583mm @ 170mm stroke Weight: from 2320 grams Ohlins RXF38 m.2 Suspension Fork

by Ohlins

—$1,350

Please, specificy in the Notes/Special Instructions section of the Cart Page what travel range you would like the fork at, choices are from 130mm to 170mm as well as your riding weight. The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses. Do you want to know what suspension that fits your bike? Use Öhlins Performance Suspension Guide, it will also recommend a personal set up. Features: TTX 18 cartridge kit Coil: Travel 130mm - 170mm Independent spring system Independent damper system 36mm upper tube diameter Overall improvements for reducing friction Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Coil Suspension Fork

by Ohlins

—$1,245

Please, specificy in the Notes/Special Instructions section of the Cart Page what travel range you would like the fork at, choices are from 130mm to 170mm as well as your riding weight. The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses. Do you want to know what suspension that fits your bike? Use Öhlins Performance Suspension Guide, it will also recommend a personal set up. Features: TTX 18 cartridge kit Coil: Travel 130mm - 170mm Independent spring system Independent damper system 36mm upper tube diameter Overall improvements for reducing friction Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Coil Suspension Fork

by Ohlins

—$899.99

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$1,190

RXF34 m.2 is our new platform aimed for short travel trail bikes also known as downcountry bikes. The fork balances light weight with a stiff chassis giving a predictable steering. It has our new OTX18 damper that is an evolution of the more gravity oriented and highly successful TTX18 damper. OTX18 is 27% lighter and optimized for faster and more fluid trail riding, it strikes the best balance between traction, control and weight. The air spring has a positive and self balancing negative chamber and it can be tuned with a new spacer system. The RXF34 m.2 is all you can expect from a race fork but in a short travel trail fork format. Features: OTX18 Trail Optimized Damper 34 mm stanchions 15 clicks of low-speed compression adjustment 15 clicks of rebound adjustment 3 clicks of high-speed compression adjustment, climb mode in 4th position Maximum tire size: 29x2.6” Weight: 1698g without volume spacers Ohlins RXF34 m.2 Suspension Fork

by Ohlins

—$1,350

Please, specificy in the Notes/Special Instructions section of the Cart Page what travel range you would like the fork at, choices are from 130mm to 170mm as well as your riding weight. The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses. Do you want to know what suspension that fits your bike? Use Öhlins Performance Suspension Guide, it will also recommend a personal set up. Features: TTX 18 cartridge kit Coil: Travel 130mm - 170mm Independent spring system Independent damper system 36mm upper tube diameter Overall improvements for reducing friction Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Coil Suspension Fork

by Ohlins

—$1,350

Please, specificy in the Notes/Special Instructions section of the Cart Page what travel range you would like the fork at, choices are from 130mm to 170mm as well as your riding weight. The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses. Do you want to know what suspension that fits your bike? Use Öhlins Performance Suspension Guide, it will also recommend a personal set up. Features: TTX 18 cartridge kit Coil: Travel 130mm - 170mm Independent spring system Independent damper system 36mm upper tube diameter Overall improvements for reducing friction Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Coil Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$899.99

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins