Forks / Parts

—$463.50

You want World Champion winning performance in your current fork? No problem, our Öhlins DH race drop in damper and air spring system available for RockShox BoXXer downhill forks. Öhlins TTX 18 cartridge kit featuring downhill-optimized 18 mm piston for improved small bump sensitivity. Increased damping pressure bandwidth to achieve improvements in damping valve response and sensitivity. The adjustment range specifically for gravity use both race and park. 15 clicks of low-speed compression and low-speed rebound and 5 clicks of high-speed compression. Twin piston three-chamber air spring system, isolated from the upper tubes to reduced head build up and featuring Total Tune Spring Curve System (TTSC) allowing total air spring tuning from the initial movement through to the bottom out. Features: TTX-technology Independent damper system Ohlins TTX Air Springs & Parts

by Ohlins

—$1,190

The RXF34 m.2 uses the newly-designed OTX18 damper. Sprung out of the highly successful TTX18 found in the Öhlins downhill and trail forks, the OTX18 is purpose-built for lightweight trail bikes. It shares several key components with its bigger TTX18 brother, but weighs 27% less and is optimized for faster and more fluid trail riding, striking the optimal balance between traction, control, weight and stiffness. Like all Öhlins dampers, the OTX18 offers impressive adjustability for fine-tuning, with fifteen clicks of low-speed compression and rebound adjustment alongside three for tweaks to high-speed compression. As always, a large and extensively-tested setting bank is also available for those who wish to customize their ride feel even further. Designed for riders who cover lots of ground - FAST. The new fork replaces the original RXF34, and offers a short-travel 120-130mm setup optimized for lightweight 29er trail bikes. Weighing in at just 1698g, the fork can boast of a brand new air spring and damper adapted for the demands of the emerging “downcountry” riding style, while still carrying all the hallmarks of Öhlins’ race-proven performance suspension seen from its long-travel, single-crown cousins - the RXF36 m.2 & RXF38 m.2. Features: OTX18 Trail Optimized Damper 34 mm stanchions 15 clicks of low-speed compression adjustment 15 clicks of rebound adjustment 3 clicks of high-speed compression adjustment, climb mode in 4th position Maximum tire size: 29x2.6” Weight: 1698g without volume spacers Axle to crown: 541mm @ 130mm stroke Ohlins RXF34 m.2 Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$8.28

The Ohlins universal front fork brake hose clamp/guide is designed to work with all Ohlins forks. Includes plastic clamp piece and 1 mounting bolt (MC6S 3x10) Includes plastic clamp/guide piece and mounting bolt (MC6S 3x10) Universal design works on all Ohlins forks Ohlins Brake Hose Clamp/Guide Other Fork Part UPC: 888818151196

by Ohlins

—$1,395

The RXF38 m.2 delivers hard-hitting dual-crown downhill performance to the single-crown scene. The brand new RXF38 m.2 is available for 29” bikes, with five different iterations offering a range of 160-180mm travel, and 44 and 51mm crown offset options built around Öhlins signature TTX18 damper and unique three-chamber air spring. Developed for hard-hitting trail, enduro and e-MTB use, the RXF38 m.2 shares several key technologies with its dual-crown brother, the DH38. The newcomer to the Öhlins lineup brings 38mm stanchions to the brand’s single crown range, a chassis optimized for big-hit trail riding, confidence-inspiring TTX damping and unrivalled adjustability. It’s the product of Öhlins long-term close collaboration with the UCI DH World Championship-winning team Specialized Gravity, where milliseconds gained make for wins. The fork’s re-tuned twin-piston and three-chamber air spring system allow for comprehensive, simple and tool-free air spring tuning from the initial movement right through to the bottom out. And much like the World Cup-winning DH38 m.1, the RXF38 m.2 benefits from a huge range of intuitive adjustments. Riders can easily fine-tune the fork’s performance to suit any terrain, thanks to 15 clicks of low-speed compression and low-speed rebound damping and 3 clicks of high-speed compression adjustment, in addition to a climb mode setting. Setup is simple then, but for those who want to go even further, and adjust their fork like the pros, a race-proven setting bank is also available at Öhlins service centers for even more fine-tuning. The fork’s overhauled chassis and uncompromisingly stiff 38mm stanchions are complemented by Öhlins signature TTX18 damping system. Adopted from its DH38 m.1 big brother and adapted to fit a single-crown platform, the TTX18 damping system offers world-class, race-proven performance. Its increased damping pressure bandwidth enables improved damping valve response, with a trail-optimized 18mm piston providing superb small bump sensitivity to keep tires planted over technical terrain. When it comes to bumps of the bigger variety, the fork’s highly capable air spring and TTX18 damper combine to swallow roots and rocks whole, maintaining speed and grip on the toughest lines. Between the big hits, the RXF38 m.2 makes light work of servicing too. Courtesy of Öhlins simple service kit – compatible across the RXF and DH range – the RXF38 m.2 can be maintained factory fresh year after year, so you can focus on the riding. Features: TTX18 damping system Independent cartridge air spring and damper systems Air spring adjustable to 160/170/180 mm of travel 38 mm stanchion diameter with both 44mm and 51mm crown offsets Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 Floating axle design to minimize friction Approved for eMTB use and available with eMTB compatible crowns Compatible with maximum tire sizes up to 29”x2.6 Compatible with maximum rotor sizes up to 220mm, optimised for 200mm. Axle to crown measurement: 583mm @ 170mm stroke Weight: from 2320 grams Ohlins RXF38 m.2 Suspension Fork

by Ohlins

—$1,395

The RXF38 m.2 delivers hard-hitting dual-crown downhill performance to the single-crown scene. The brand new RXF38 m.2 is available for 29” bikes, with five different iterations offering a range of 160-180mm travel, and 44 and 51mm crown offset options built around Öhlins signature TTX18 damper and unique three-chamber air spring. Developed for hard-hitting trail, enduro and e-MTB use, the RXF38 m.2 shares several key technologies with its dual-crown brother, the DH38. The newcomer to the Öhlins lineup brings 38mm stanchions to the brand’s single crown range, a chassis optimized for big-hit trail riding, confidence-inspiring TTX damping and unrivalled adjustability. It’s the product of Öhlins long-term close collaboration with the UCI DH World Championship-winning team Specialized Gravity, where milliseconds gained make for wins. The fork’s re-tuned twin-piston and three-chamber air spring system allow for comprehensive, simple and tool-free air spring tuning from the initial movement right through to the bottom out. And much like the World Cup-winning DH38 m.1, the RXF38 m.2 benefits from a huge range of intuitive adjustments. Riders can easily fine-tune the fork’s performance to suit any terrain, thanks to 15 clicks of low-speed compression and low-speed rebound damping and 3 clicks of high-speed compression adjustment, in addition to a climb mode setting. Setup is simple then, but for those who want to go even further, and adjust their fork like the pros, a race-proven setting bank is also available at Öhlins service centers for even more fine-tuning. The fork’s overhauled chassis and uncompromisingly stiff 38mm stanchions are complemented by Öhlins signature TTX18 damping system. Adopted from its DH38 m.1 big brother and adapted to fit a single-crown platform, the TTX18 damping system offers world-class, race-proven performance. Its increased damping pressure bandwidth enables improved damping valve response, with a trail-optimized 18mm piston providing superb small bump sensitivity to keep tires planted over technical terrain. When it comes to bumps of the bigger variety, the fork’s highly capable air spring and TTX18 damper combine to swallow roots and rocks whole, maintaining speed and grip on the toughest lines. Between the big hits, the RXF38 m.2 makes light work of servicing too. Courtesy of Öhlins simple service kit – compatible across the RXF and DH range – the RXF38 m.2 can be maintained factory fresh year after year, so you can focus on the riding. Features: TTX18 damping system Independent cartridge air spring and damper systems Air spring adjustable to 160/170/180 mm of travel 38 mm stanchion diameter with both 44mm and 51mm crown offsets Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 Floating axle design to minimize friction Approved for eMTB use and available with eMTB compatible crowns Compatible with maximum tire sizes up to 29”x2.6 Compatible with maximum rotor sizes up to 220mm, optimised for 200mm. Axle to crown measurement: 583mm @ 170mm stroke Weight: from 2320 grams Ohlins RXF38 m.2 Suspension Fork

by Ohlins

—$1,350

Please, specificy in the Notes/Special Instructions section of the Cart Page what travel range you would like the fork at, choices are from 130mm to 170mm as well as your riding weight. The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses. Do you want to know what suspension that fits your bike? Use Öhlins Performance Suspension Guide, it will also recommend a personal set up. Features: TTX 18 cartridge kit Coil: Travel 130mm - 170mm Independent spring system Independent damper system 36mm upper tube diameter Overall improvements for reducing friction Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Coil Suspension Fork

by Ohlins

—$1,245

Please, specificy in the Notes/Special Instructions section of the Cart Page what travel range you would like the fork at, choices are from 130mm to 170mm as well as your riding weight. The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses. Do you want to know what suspension that fits your bike? Use Öhlins Performance Suspension Guide, it will also recommend a personal set up. Features: TTX 18 cartridge kit Coil: Travel 130mm - 170mm Independent spring system Independent damper system 36mm upper tube diameter Overall improvements for reducing friction Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Coil Suspension Fork

by Ohlins

—$899.99

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$63.80

The first step to achieving great suspension is selecting the correct spring. Ohlins offers a wide range of 7 fork spring rates for the RXF38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins RXF38 fork 50 lbs/in spring rate intended for riders weighing between 180 lbs to 200 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (50 lbs/in has blue bands) 191 mm of actual stroke 335 mm (+/- 3mm) free length 18.5 mm I.D. / 4.6 mm wire diameter Ohlins RXF38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642067

by Ohlins

—$49.02

The Ohlins lower leg seal kit includes blue SKF scrapers, foam rings and Sag/Travel o-ring for 100 hour chassis service. Lower leg seal kit for Ohlins RXF38 m.1 / m.2 and DH38 m.1 / m.2 forks Blue colored energized scrapers are made by SKF and ensure grit is pushed off without adding unnecessary friction Foam rings soaked in bath oil during installation ensure smooth action and no dirt bypassing into the bushings Include (2) blue scrapers, (2) foam rings, and (1) sag/travel o-ring Ohlins Lower Leg Seal Kit Seal Kit UPC: 840153641596

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$63.80

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 50 lbs/in spring rate intended for riders weighing between 180 lbs to 200 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (50 lbs/in has blue bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 4.6 mm wire diameter Ohlins DH38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642135

by Ohlins

—$70.81

Ohlins complete fork seal head assembly for all Ohlins 3-chamber air cartridge forks. The kit includes an updated m.2-spec "L-cup" scraper to ensure less oil and dirt ingestion, also increasing negative volume. Great upgrade for older RXF forks. Complete seal head replacement for all Ohlins forks with 3-chamber air spring cartridges Blue seal head features an upgraded scraper that significantly reduces oil ingestion, enabling the use of more bath oil The "Blue" seal head also has more negative volume available, which means a more supple off-the-top feel, and helps combat initial stiction Includes a white volume spacer pre-installed to help tune the negative air volume Retrofittable to all 3-chamber forks: RXF 36, 38, and DH38 Ohlins Air Spring Seal Head Assembly Air Springs & Parts UPC: 840153641558

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 160 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640391

by Ohlins

—$45.33

The Ohlins lower leg seal kit includes blue SKF scrapers, foam rings and Sag/Travel o-ring for 100 hour chassis service. Lower leg seal kit for all RXF36-series forks (Original, EVO, m.2, and m.3) Blue colored energized scrapers are made by SKF and ensure grit is pushed off without adding unnecessary friction Foam rings soaked in bath oil during installation ensure smooth action and no dirt bypassing into the bushings Include (2) blue scrapers, (2) foam rings, and (1) sag/travel o-ring Ohlins Lower Leg Seal Kit Seal Kit UPC: 840153641534

by Ohlins

—$42.89

The Ohlins lower leg seal kit includes blue SKF scrapers, foam rings and Sag/Travel o-ring for 100 hour chassis service. Lower leg seal kit for Ohlins RXF34 and RXC34 forks with 34mm stancions Blue colored energized scrapers are made by SKF and ensure grit is pushed off without adding unnecessary friction Foam rings soaked in bath oil during installation ensure smooth action and no dirt bypassing into the bushings Include (2) blue scrapers, (2) foam rings, and (1) sag/travel o-ring Ohlins Lower Leg Seal Kit Seal Kit UPC: 840153623684

by Ohlins

—$198

The Ohlins coil spring kit for DH38 suspension fork allows the rider to swap from the standard air spring to a coil spring setup. Due to the unique Ohlins air cartridge design, the fork can be exchanged between coil and air indefinitely. Experience the lower friction, initial suppleness, and lack of maintenance a coil spring offers. Two important notes: The actual spring IS NOT INCLUDED (Sold Separately). Requires Ohlins coil tool for installation (Sold Separately). Intended for DH38 fork series Kit includes the top cap with adjustable preload and the bottom coil shaft (Spring Sold Separately) Adjustable travel from 160 mm up to 200 mm Arrives from the factory set up in 200mm Allows riders to indefinitely swap between air and coil spring options Requires Ohlins coil tool for installation (Sold Separately) Ohlins DH38 Coil Spring Kit Coil Springs & Parts UPC: 840153642784

by Ohlins

—$1,309

Unleash the next level of racing performance with the latest innovation in Ohlins front suspension - the RXC34 m.1 XC fork. Equipped with their race-proven floating axle design, the RXC34 m.1 features a chassis with a stiff yet lightweight aluminum crown construction, providing precise steering and predictable performance. The RXC34 m.1 incorporates an all-new damper and updated air spring to further enhance speed and control on technical cross-country tracks. As part of the hlins XC suspension system, the RXC34 m.1 boasts a rider-friendly system to adjust air spring progressiveness and stroke. And with their race proven setting bank, you'll be able to fine-tune the fork to your unique riding style and bike linkage. Uses the new XC-optimized OTX14 damper that's been extensively designed to provide a slim, lightweight damper packed with technology Highly adjustable with race-proven setting bank to match riding style and bike Two-chamber air spring feature a large negative air chamber balanced with the damper s characteristics in the three different ride modes open, pedal, and lockout Creates the initial movement required for superior traction while retaining best-in-class, predictable support when pushing hard 12 clicks of LSC and 12 Clicks of rebound Up to 5 positive volume spacers to adjust progressiveness (depending on travel) Up to 7 negative spacers to adjust initial sensitivity 15mm x 110mm boost floating thru-axle axle design Item Specifications Axle to Crown Length 531 Brake Type Post Mount 180 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Type Tapered Travel (mm) 120 Weight 1598 Wheel Size 29" Ohlins RXC34 m.1 XC Suspension Fork Suspension Fork UPC: 840153633591

by Ohlins

—$1,190

RXF34 m.2 is our new platform aimed for short travel trail bikes also known as downcountry bikes. The fork balances light weight with a stiff chassis giving a predictable steering. It has our new OTX18 damper that is an evolution of the more gravity oriented and highly successful TTX18 damper. OTX18 is 27% lighter and optimized for faster and more fluid trail riding, it strikes the best balance between traction, control and weight. The air spring has a positive and self balancing negative chamber and it can be tuned with a new spacer system. The RXF34 m.2 is all you can expect from a race fork but in a short travel trail fork format. Features: OTX18 Trail Optimized Damper 34 mm stanchions 15 clicks of low-speed compression adjustment 15 clicks of rebound adjustment 3 clicks of high-speed compression adjustment, climb mode in 4th position Maximum tire size: 29x2.6” Weight: 1698g without volume spacers Ohlins RXF34 m.2 Suspension Fork

by Ohlins

—$1,350

Please, specificy in the Notes/Special Instructions section of the Cart Page what travel range you would like the fork at, choices are from 130mm to 170mm as well as your riding weight. The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses. Do you want to know what suspension that fits your bike? Use Öhlins Performance Suspension Guide, it will also recommend a personal set up. Features: TTX 18 cartridge kit Coil: Travel 130mm - 170mm Independent spring system Independent damper system 36mm upper tube diameter Overall improvements for reducing friction Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Coil Suspension Fork

by Ohlins

—$1,350

Please, specificy in the Notes/Special Instructions section of the Cart Page what travel range you would like the fork at, choices are from 130mm to 170mm as well as your riding weight. The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses. Do you want to know what suspension that fits your bike? Use Öhlins Performance Suspension Guide, it will also recommend a personal set up. Features: TTX 18 cartridge kit Coil: Travel 130mm - 170mm Independent spring system Independent damper system 36mm upper tube diameter Overall improvements for reducing friction Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Coil Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 180 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640414

by Ohlins

—$79.65

The Ohlins 200 hour rebuild kit for their suspension fork air spring cartridges includes all major wear items for a more thorough rebuild. Thorough rebuild kit (also called the "200-hour" kit) for the 3-chamber air spring cartridge The 3-chamber air spring cartridge is found in all RXF36, RXF38, and DH38 forks Use this kit if the fork has skipped a few services, has been abused, or exhibits any signs of leaking Includes less common wear items, such as Schrader valves, IFP bump rubber, and seal head scrapers (Please note that not all parts will be used upon completion Individually labeled when necessary to ease identification Ohlins 200 Hour Air Spring Rebuild Kit Service Kit UPC: 840153641510

by Ohlins

—$250

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 170mm air spring cartridge for the RXF38 m.2 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup Ohlins Complete Air Spring Cartridge Assembly Air Springs & Parts UPC: 840153644702

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 150 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640384

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 170 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640407

by Ohlins

—$103.95

With the Ride Mode Remote for XC suspension, you can control both your rear shock and front fork suspension. Compatible with Ohlins front forks and shocks featuring a remote connection, it offers three ride mode positions and dual wire pull for adjusting both front and rear. For the remote connection versions, Ohlins developed a remote with a flexible solution where it is possible to add a dropper lever underneath the remote. It is also highly adjustable - it has three positions for the ride modes and adjusts the front and rear suspension at the same time. Designed for seamless integration, it works with the Matchmaker X interface, and the detachable Matchmaker-X-compatible mount allows for seat post remote attachment. It can also be mounted directly to a SRAM brake lever without using a clamp, creating a compact and streamlined control center on your handlebars. Designed for 7.5 mm of wire pull per position to allow use the shock with remote levers from other top brands Lever-actuated 3-position ride remote includes descending, pedaling, and lockout Clamp works with the Matchmaker X interface Two lever blade remote device includes bar clamp, Removable Matchmaker X plate, two cables Ohlins Suspension Fork / Rear Shock Remote Lever Remotes & Parts UPC: 840153638268

by Ohlins

—$434.50

hlins offers four different crown sets for DH38 suspension fork that differ in offset, allowing riders to further customize their ride. Offset is the distance between the wheel axle and the steerer tube and affects how the bike steers by changing the "trail" dimension. There are three different offsets: 46mm, 50mm, 54mm, and 58mm. Typically, shorter offsets are more stable but require more steering input to change direction. The opposite is true, too; the longer the offset, the easier it is to steer, but it will be less stable at speed. Most DH bikes with 29" wheels use 58mm and 54mm offset, while DH bikes with 27.5" front wheels use 46mm. Provides 50mm offset to DH38 suspension forks Includes one lower crown with a straight 1.125" steerer tube pressed in Includes two upper crowns; one flat, one drop crown Comes with two rubber fork bumpers M6 x 16 clamp bolts Black Anodized Finish Ohlins DH38 Suspension Fork Crownset Crown/Steerer/Uppertube Assembly UPC: 840153633492

by Ohlins

—$434.50

hlins offers four different crown sets for DH38 suspension fork that differ in offset, allowing riders to further customize their ride. Offset is the distance between the wheel axle and the steerer tube and affects how the bike steers by changing the "trail" dimension. There are three different offsets: 46mm, 50mm, 54mm, and 58mm. Typically, shorter offsets are more stable but require more steering input to change direction. The opposite is true, too; the longer the offset, the easier it is to steer, but it will be less stable at speed. Most DH bikes with 29" wheels use 58mm and 54mm offset, while DH bikes with 27.5" front wheels use 46mm. Provides 54mm offset to DH38 suspension forks Includes one lower crown with a straight 1.125" steerer tube pressed in Includes two upper crowns; one flat, one drop crown Comes with two rubber fork bumpers M6 x 16 clamp bolts Black Anodized Finish Ohlins DH38 Suspension Fork Crownset Crown/Steerer/Uppertube Assembly UPC: 840153633508

by Ohlins

—$1,675

New DH38 m.2 air sprung suspension fork with features reworked internals and updated settings, built around the race-proven TTX18 cartridge. This powerful fork is the ultimate downhill weapon, delivering hard-hitting performance through its dual-crown design. The new DH38 m.2 fork is the most advanced downhill fork Ohlins has ever created, offering improvements in comfort, sensitivity, and bottom-out control. Bottom-out progressiveness has been increased with the addition of a spring booster, and the system is further optimized for use with volume spacers, giving riders greater flexibility to fine-tune their ride feel. With these upgrades, the new DH38 m.2 is the ultimate fork for gravity riders charging down the steepest lines and attacking the most demanding courses-engineered to push harder, land bigger, and inspire full confidence. Four separately sold DH Crowns, you can choose from 46-, 50-, 54-, or 58-mm offset options to match your setup and preferred riding style Independent cartridge spring and damper systems Air-sprung for maximum adjustability Cartridge-based spring system allows for quick swaps between Air and Coil setups when needed (coil cartridge sold separatelty) Race-proven setting bank that features 3 HSC Clicks, 16 LSC Clicks and 16 LSR Clicks New surface treatment on the 38mm stanchions improves small-bump sensitivity and overall ride smoothness and also reduces wear for long-term performance 20mm x 110mm Boost floating thru-axle set up for minimum friction Compatible with 29" and 27.5" wheels eMTB compatible Item Specifications Brake Type Post Mount 200 Color Gloss Black Crown Race 30 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 20mm Thru x 110mm Boost Lockout Switch Crown Maximum Tire Width 71 Negative Spring Air Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Straight Travel (mm) 200 Wheel Size 27.5" Wheel Size 29" Ohlins DH38 m.2 Suspension Fork Suspension Fork UPC: 840153633539

by Ohlins

—$1,534.50

The new RXF38 m.3 features reworked internals and updated settings, built around the race-proven TTX18 damper cartridge. This stiff fork is the perfect match for e-MTBs, aggressive trail riding and enduro racing, delivering significant performance upgrades on every ride. The new RXF38 m.3 fork delivers hard-hitting, dual-crown downhill performance in a single-crown design, with improvements in comfort, sensitivity, and bottom-out control. Bottom-out progressiveness has been increased with the addition of a spring booster, and the system is further optimized for use with volume spacers, giving riders greater flexibility to fine-tune their ride feel. With these upgrades, the new RXF38 m.3 fork is the most advanced trail fork Ohlins has ever created and your top choice when the trails get steeper, the rock gardens rougher, and the gaps bigger. The RXF38 m.3 s adjustment range provides 16 clicks of low-speed compression, 3 clicks of high-speed compression, and 16 clicks of rebound adjustment Cartridge-based air spring allows for quick swaps between air and coil setups when needed (coil cartridge sold separately) Features Ohlins floating axle design to minimize friction and weighs 2,320 g (with bolts and axle) For 29 wheel sized frames New surface treatment on the 38mm stanchions improves small-bump sensitivity and overall ride smoothness in the new RXF38 m.3 Updated lowers feature a gloss black finish and bold new graphics, ensuring riders can both feel and see the next level of performance every time they hit the trail or park 15mm x 110mm boost floating thru-axle axle design to minimize friction eMTB approved Item Specifications Axle to Crown Length 573 Brake Type Post Mount 200 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Tapered Travel (mm) 160 Weight 2320 Wheel Size 29" Ohlins RXF38 m.3 Suspension Fork Suspension Fork UPC: 840153644368

by Ohlins

—$1,369.50

The RXF36 m.3 features an all-new chassis built around the race-proven TTX18 damper cartridge. This lightweight and highly progressive fork is fully optimized for demanding, next-level trail riding performance. The Ohlins race-winning TTX18 damping technology from the DH38 Race Fork has been adapted to deliver its renowned top-tier traction and control on the most demanding trails. The updated settings and reduced chassis friction offers improved sensitivity for greater traction and comfort to conquer any trail~With the new chassis, the fork delivers ultra-sensitive tracking over small bumps while maintaining Ohlins' signature precise steering and predictable handling-no matter how long or hard it's pushed. RXF36 m.3 features increased internal bushing overlap and an optimized configuration for 29 wheels Race-proven adjustment range is specifically designed for tough trails and provides 16 clicks of low-speed compression, 3 clicks of high-speed compression, and 16 clicks of rebound adjustment Features Ohlins' floating axle design for minimal friction and weighs 2050 g (with bolts and axle) The retuned, twin piston, three chamber air-spring system allows you to completely dial-in the level of progression from the initial movement, right through to the bottom out Air spring is cartridge-based, allowing for easy swaps between coil and air if desired (coil cartridge sold separately) New surface treatment on the 36mm stanchions lowers the friction, boosts small bump sensitivity and overall ride smoothness Updated lowers feature a gloss black finish and bold new graphics, ensuring riders can feel and see the next level of performance every time they hit the trail or park 15mm x 110mm boost floating thru-axle axle design to minimize friction eMTB approved Item Specifications Axle to Crown Length 553 Brake Type Post Mount 180 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Type Tapered Travel (mm) 140 Weight 2050 Wheel Size 29" Ohlins RXF36 m.3 Suspension Fork Suspension Fork UPC: 840153642869

by Ohlins

—$1,534.50

The new RXF38 m.3 features reworked internals and updated settings, built around the race-proven TTX18 damper cartridge. This stiff fork is the perfect match for e-MTBs, aggressive trail riding and enduro racing, delivering significant performance upgrades on every ride. The new RXF38 m.3 fork delivers hard-hitting, dual-crown downhill performance in a single-crown design, with improvements in comfort, sensitivity, and bottom-out control. Bottom-out progressiveness has been increased with the addition of a spring booster, and the system is further optimized for use with volume spacers, giving riders greater flexibility to fine-tune their ride feel. With these upgrades, the new RXF38 m.3 fork is the most advanced trail fork Ohlins has ever created and your top choice when the trails get steeper, the rock gardens rougher, and the gaps bigger. The RXF38 m.3 s adjustment range provides 16 clicks of low-speed compression, 3 clicks of high-speed compression, and 16 clicks of rebound adjustment Cartridge-based air spring allows for quick swaps between air and coil setups when needed (coil cartridge sold separately) Features Ohlins floating axle design to minimize friction and weighs 2,320 g (with bolts and axle) For 29 wheel sized frames New surface treatment on the 38mm stanchions improves small-bump sensitivity and overall ride smoothness in the new RXF38 m.3 Updated lowers feature a gloss black finish and bold new graphics, ensuring riders can both feel and see the next level of performance every time they hit the trail or park 15mm x 110mm boost floating thru-axle axle design to minimize friction eMTB approved Item Specifications Axle to Crown Length 593 Brake Type Post Mount 200 Color Gloss Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 38 Steerer Type Tapered Travel (mm) 180 Weight 2320 Wheel Size 29" Ohlins RXF38 m.3 Suspension Fork Suspension Fork UPC: 840153644399

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$1,245

The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork

by Ohlins

—$26.96

The Ohlins service kit for their suspension fork air spring cartridges includes common wear items to perform the 100 hour/standard service. Simplified 100-hour air spring service kit covers all common wear items for the 3-chamber air spring cartridge Compatible with the 3-chamber air spring found in all RXF36, RXF38, and DH38 forks Individually labeled when necessary to ease identification Ohlins 100 Hour Air Spring Service Kit Service Kit UPC: 840153641503

by Ohlins

—$63.80

The first step to achieving great suspension is selecting the correct spring. Ohlins offers a wide range of 7 fork spring rates for the RXF38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins RXF38 fork 55 lbs/in spring rate intended for riders weighing between 200 lbs to 220 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (55 lbs/in has white bands) 191 mm of actual stroke 335 mm (+/- 3mm) free length 18.5 mm I.D. / 4.7 mm wire diameter Ohlins RXF38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642074

by Ohlins

—$63.80

The first step to achieving great suspension is selecting the correct spring. Ohlins offers a wide range of 7 fork spring rates for the RXF38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins RXF38 fork 40 lbs/in spring rate intended for riders weighing between 140 lbs to 160 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (40 lbs/in has yellow bands) 191 mm of actual stroke 335 mm (+/- 3mm) free length 18.5 mm I.D. / 4.2 mm wire diameter Ohlins RXF38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642043

by Ohlins

—$63.80

The first step to achieving great suspension is selecting the correct spring. Ohlins offers a wide range of 7 fork spring rates for the RXF38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins RXF38 fork 45 lbs/in spring rate intended for riders weighing between 160 lbs to 180 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (45 lbs/in has green bands) 191 mm of actual stroke 335 mm (+/- 3mm) free length 18.5 mm I.D. / 4.4 mm wire diameter Ohlins RXF38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642050

by Ohlins

—$63.80

The first step to achieving great suspension is selecting the correct spring. Ohlins offers a wide range of 7 fork spring rates for the RXF38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins RXF38 fork 60 lbs/in spring rate intended for riders weighing between 220 lbs to 240 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (60 lbs/in has black bands) 191 mm of actual stroke 335 mm (+/- 3mm) free length 18.5 mm I.D. / 4.8 mm wire diameter Ohlins RXF38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642081

by Ohlins

—$63.80

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 55 lbs/in spring rate intended for riders weighing between 200 lbs to 220 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (55 lbs/in has white bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 4.8 mm wire diameter Ohlins DH38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642142

by Ohlins

—$63.80

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 40 lbs/in spring rate intended for riders weighing between 140 lbs to 160 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (40 lbs/in has yellow bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 4.3 mm wire diameter Ohlins DH38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642111

by Ohlins

—$63.80

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 65 lbs/in spring rate intended for riders weighing between 240 lbs to 260 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (65 lbs/in has red/black/red bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 5.1 mm wire diameter Ohlins DH38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642166

by Ohlins

—$63.80

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 60 lbs/in spring rate intended for riders weighing between 220 lbs to 240 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (60 lbs/in has black bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 4.9 mm wire diameter Ohlins DH38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642159

by Ohlins

—$63.80

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 45 lbs/in spring rate intended for riders weighing between 160 lbs to 180 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (45 lbs/in has green bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 4.5 mm wire diameter Ohlins DH38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642128

by Ohlins