Forks / Parts

—$115

Make a good fork a great fork. Introducing the Luftkappe air piston kit for Fox Float forks. The Luftkappe is available for: 34 Float NA2 (2016-17) Performance & Factory Series (130mm + only - 120mm and lower need the 2018 Evol air shaft before a Luftkappe can be fitted) 34 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA (2015-17) Performance & Factory Series (max 180mm travel, min 120mm travel) Pinkbike: "The Luftkappe's change to the feel of the Lyrik was immediately noticeable on the trail. Traction was increased across chatter and the fork remained higher in its travel and more stable, improving the dynamic ride height without sacrificing the top end. My confidence soared when hitting sections with a lot of chatter and mid to large-sized hits, and the result meant more comfort and speed through such sections." Taking everything we learned with the Corset air sleeves and the Luftkappe we developed for the Pike, Yari & Lyrik, this second generation Luftkappe is a new air piston assembly for Fox's 34 NA2/Evol and 36 Evol forks. User installable and simple to set up, the Luftkappe transforms a good fork into a great fork. Softer initial stroke Larger negative air chamber Increased sag without the associated diving Coil-like initial & mid-stroke spring rate without excessive bottoming Increased sensitivity Improved mid stroke support & control Superior bump compliance and traction Reduced hand fatigue Reduces required compression damping Retains volume spacer compatibility Optional tools available for self-install What's included in the kit: 34 Evol: Upgrade low friction air piston assembly. 34 NA2: Upgrade low friction air piston assembly & upgrade low friction, low profile sealhead 36 Evol: Upgrade low friction air piston assembly. 36 NA: Upgrade low friction air piston assembly & upgrade topout spacer ring Note: If your 36 Evol tops out noticeably, you will need to replace your air shaft assembly before purchasing the Luftkappe. Fox have updated this part due to the topout issues that many of the 2018 36 Evol forks had. 34 forks do not have this issue. Relevant Fox part numbers for the new air shaft assemblies, by travel: 180mm: 820-02-534-KIT 170mm: 820-02-535-KIT 160mm: 820-02-536-KIT 150mm: 820-02-537-KIT 140mm: 820-02-538-KIT 100mm (36 831): 820-02-539-KIT If your fork does not have noticeable top-out issues, you don't need to replace the shaft before installing the Luftkappe. FAQ: 1. Can I install it myself? Yes, provided you have access to the supplies and tools listed in the installation instructions above. If you're really crafty (and EXTREMELY careful) it is possible to install the Luftkappes (all Evol variants) without the installation tools, however the risk of damaging things is much higher and we really don't recommend trying. If you choose to take this route and damage your air shaft (or anything else), we cannot be held responsible - we make the tools available for a reason. It is not possible to install the 34 NA2 Luftkappe kit without 10mm shaft clamps and the bullet tool - you'll damage the shaft AND damage the seals on the new sealhead. 2. Does it work with TALAS forks? No, sorry. 3. Does it work with versions of the 36 prior to 2015? No, sorry! 4. Does it work with 32s or 40s? No, sorry. 5. How does it actually work? It enlarges the negative air chamber to reduce the initial spring rate. This lets you run higher air pressure for more support in the middle and end of the stroke with improved sensitivity in the start of the stroke. 6. Is it compatible with MRP's Ramp Control cartridge? Generally speaking no. If you are running your fork at least 30mm shorter than its maximum available travel, then yes. 7. Shouldn't I just buy a new fork instead? Sure, they're about the same price as the Luftkappe. 8. What parts does it actually replace in the air spring? It replaces the plastic piston itself, and the rubber topout bumper in the 34s is removed but not replaced (36 topout assembly is unchanged). You reuse your air shaft, though the 34NA2 kit comes with a replacement low friction, low profile sealhead comparable in size to the stock 2018 Evol sealhead. This is also why the NA2 kit is more expensive than the other two - it's basically a 2018 Factory update on top of a Luftkappe. 9. Who is this NOT suited for? The Luftkappe is outright superior to the stock air spring for nearly everyone, however there are a few cases where it might not be for you: - If you run your 36 at 180mm, it will be quite progressive. You may like it, but you may also find it hard to use the last 5-10mm of travel - if this would bother you then have a think about it first. At 170mm and below it will be fine. - If you like running really low sag for some reason. The Luftkappe runs more sag than the stock fork, but is firmer in the mid stroke - similar to a coil fork, but with ending-stroke ramp up to prevent harsh bottoming. If you're the kind of person who wants the fork to run 5% sag, this isn't for you. We could point out that a setup like that probably just means your handlebars are set too low and you're compensating with oversprung suspension, but we aren't here to judge you, so maybe just don't buy it. - If you're anal about your fork having an exact (but rounded-to-the-nearest-10mm) amount of travel. Because the Luftkappe balances forces at a pneumatic topout, the force right around topout is very low (literally zero other than friction), meaning the weight of the bike alone will cause it to sag a few millimetres. Your car's suspension sags under the vehicle's own weight, so should your bike - unless it was so sticky, overly stiff or over-preloaded that 10kg of bike weight wasn't enough to cause your suspension to move at all, of course. If only having an apparent 148mm out of a 150mm fork is a big deal for you, stick with the stock fork. (in)Compatibility Information: Luftkappe IS available for: 34 Float NA2 (Performance, Performance Elite and Factory Series, 2016-17), 130mm and higher travel 34 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA1 (NA) Not compatible with: Rhythm-series forks E-bike specific forks Non-Evol (pre-2018) 36 forks 34mm forks for 29" wheels with 150mm or more travel Pre-2016 34 forks Pre-2016 34 forks that were later updated with the factory NA air system update Any TALAS forks Any 32mm forks Any 40mm forks Vorsprung Luftkappe Air Springs & Parts

by Vorsprung

—$50

RockShox Seal Head Assemblies RockShox Fork Seal Head Air Springs & Parts UPC: 710845862922

by RockShox

—$45

Rudy XPLR Debonair shaft for repair and maintenance of Rockshox suspension. RockShox Rudy XPLR Debonair Shaft Air Springs & Parts UPC: 710845871757

by RockShox

—$70.81

Ohlins complete fork seal head assembly for all Ohlins 3-chamber air cartridge forks. The kit includes an updated m.2-spec "L-cup" scraper to ensure less oil and dirt ingestion, also increasing negative volume. Great upgrade for older RXF forks. Complete seal head replacement for all Ohlins forks with 3-chamber air spring cartridges Blue seal head features an upgraded scraper that significantly reduces oil ingestion, enabling the use of more bath oil The "Blue" seal head also has more negative volume available, which means a more supple off-the-top feel, and helps combat initial stiction Includes a white volume spacer pre-installed to help tune the negative air volume Retrofittable to all 3-chamber forks: RXF 36, 38, and DH38 Ohlins Air Spring Seal Head Assembly Air Springs & Parts UPC: 840153641558

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 160 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640391

by Ohlins

—$116

36 Air Shaft Assembly for Fox suspension forks. FOX 36 Air Shaft Assembly Air Springs & Parts UPC: 821973507743

by FOX

—$89

FOX 36 SL suspension fork air shaft assemblies for service and repair. FOX 36 SL Air Shaft Assembly Air Springs & Parts UPC: 821973507798

by FOX

—$89

FOX 36 SL suspension fork air shaft assemblies for service and repair. FOX 36 SL Air Shaft Assembly Air Springs & Parts UPC: 821973507927

by FOX

—$50

RockShox DebonAir+ Air Shaft for Pike C1+ Suspension Forks. Includes Air Shaft and Bumpers Buttercup and non-Buttercup compatible Compatible with RockShox FS-PIKE-SEL-C1, FS-PIKE-UFA-C2, FS-PIKE-ULT-C1, FS-PIKE-ULT-C2 RockShox Pike C1+ V2 DebonAir+ Air Shaft Air Springs & Parts UPC: 710845910043

by RockShox

—$45

DebonAir+ Air Shaft Assembly for RockShox suspension forks. RockShox DebonAir+ Air Shaft Assembly Upgrade Air Springs & Parts UPC: 710845878763

by RockShox

—$74

38 Rhythm Air Shaft Assembly for FOX suspension service and repair. FOX 38 Rhythm Air Shaft Assembly Air Springs & Parts UPC: 821973461977

by FOX

—$55

SID DebonAir Spring Shaft RockShox SID DebonAir Spring Shaft Air Springs & Parts UPC: 710845855337

by RockShox

—$45

DebonAir+ Air Shaft Assembly for RockShox suspension forks. RockShox DebonAir+ Air Shaft Assembly Upgrade Air Springs & Parts UPC: 710845878756

by RockShox

—$17.39

Volume Spacer tuning kits for FOX suspension fork service and repairs. FOX Volume Spacers Air Springs & Parts UPC: 821973456591

by FOX

—$74

38 Rhythm Air Shaft Assembly for FOX suspension service and repair. FOX 38 Rhythm Air Shaft Assembly Air Springs & Parts UPC: 821973462011

by FOX

—$74

38 Rhythm Air Shaft Assembly for FOX suspension service and repair. FOX 38 Rhythm Air Shaft Assembly Air Springs & Parts UPC: 821973462028

by FOX

—$60

Debonair Shafts for repair and maintenance of Rockshox SID and SID SL suspension forks. RockShox SID / SID SL Debonair Air Shaft Air Springs & Parts UPC: 710845897405

by RockShox

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 180 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640414

by Ohlins

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX 38 Factory 2021+ and FOX 38 Factory, Performance Elite, and Performance 2021+ New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224857

by MRP

—$5.95

Volume Spacer tuning kits for FOX suspension fork service and repairs. FOX Volume Spacers Air Springs & Parts UPC: 611056191200

by FOX

—$250

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 170mm air spring cartridge for the RXF38 m.2 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup Ohlins Complete Air Spring Cartridge Assembly Air Springs & Parts UPC: 840153644702

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 150 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640384

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 170 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640407

by Ohlins

—$26

Fox Float NA Air Spring Rebuild Kit. FOX Float Spring Rebuild Kit Air Springs & Parts UPC: 821973509709

by FOX

—$42

Air spring seal kits for Fox suspension repair and rebuild. FOX Air Spring Seal Kit Air Springs & Parts UPC: 821973509693

by FOX

—$74

FOX 34 SL suspension fork air shaft assemblies for service and repair. FOX 34 SL Air Shaft Assembly Air Springs & Parts UPC: 821973507538

by FOX

—$104

The new DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. This upgrade is for those who have 2023+ ZEB, Lyrik and Pike Select+ or Select models, or pre-2023 model Zeb forks. By focusing on refining the shape of the spring curve, RockShox created an air spring that’s more plush off-the-top, with a supremely supportive mid-stroke and improved end-stroke ramp up. They zeroed in on details to improve small bump absorption to be extremely reactive over every inch of trail and added mid-stroke support allowing the fork to sit higher in travel and utilize every millimeter of travel. The new DebonAir+ offers a supreme ride feel and consistency you can trust. Buttercups Little gold-packaged rubber pucks live at the end of the damper and air spring shafts and fit into the lower leg of the fork. Similar technology is found in off-road vehicles, chainsaws, and most devices that transfer high-frequency vibrations into the hands and arms of the user. Like a rubber mount on the handle of the chainsaw, ButterCups measurably eliminate trail chatter by on average 20%. Proven by data acquisition over thousands of trail miles and confirmed by riders. Featured in all Ultimate models and upgrade-able in the full line up of new Pike, Lyrik, and ZEBs. RockShox DebonAir+ Air Spring Assembly Upgrade Air Springs & Parts UPC: 710845895432

by RockShox

—$10.75

Volume Spacer tuning kits for FOX suspension fork service and repairs. FOX Volume Spacers Air Springs & Parts UPC: 611056191231

by FOX

—$60

Debonair Shafts for repair and maintenance of Rockshox SID and SID SL suspension forks. RockShox SID / SID SL Debonair Air Shaft Air Springs & Parts UPC: 710845897429

by RockShox

—$74

38 Rhythm Air Shaft Assembly for FOX suspension service and repair. FOX 38 Rhythm Air Shaft Assembly Air Springs & Parts UPC: 821973461984

by FOX

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 130 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm / 170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640360

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 90mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm 90 mm tube intended to convert RXF36 forks for dirt jumping Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640438

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 140 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640377

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 120 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640353

by Ohlins

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with RockShox models: SID (35mm C1+ and D1+), Lyrik D1+, and Pike C1+ New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224710

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible RockShox models: Pike 2015+, Newer Pike forks with "Boost" 15x110 axle spacing and all 2017 and newer Pike forks (regardless of axle spacing), Lyrik 2017+, Revelation 2017-2022 (35mm) Recommended for 140mm+ 29 , 27.5+, 26 and 27.5 forks New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224765

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with RockShock ZEB 2020+ (All travels and both wheel-size options) New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224772

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX 32 Float 2016+ with the FIT 4 and Grip dampers (Recommended for 100-130mm 26 , 27.5 and 29" forks) Not recommended for 80-90mm forks NOT compatible with 140-150mm forks or FOX 32 Step Cast forks New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224833

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX models: 34 Float 2016-2021forks (Recommended for 140-160mm 29 , 27.5+, and 27.5 forks), 34 Float 2022+ (130-140mm 29 forks, FOX 34 Step Cast 2019+ (Recommended for 110-120mm 29 forks) Also compatible with Marzocchi 2020 Z2 (Recommended for 140-160mm 29 , 27.5+, and 27.5 forks) Cartridges NOT compatible with TALAS forks New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224789

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX Models: FOX 36 Float 2018+ (Recommended for 140-180mm 29 , 27.5+, and 27.5 forks) Also compatible with Marzocchi Z1 (Air Only) 2019+ (All travel options) New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224741

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Compatible with FOX 40 Float Factory 2016+ and FOX 40 Performance Elite 2016+ New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224796

by MRP

—$169.95

Experience powerful, on-the-fly air spring adjustability at your findertips with an MRP Ramp Control V2 Cartridge. Ramp Control V2 gives you precise external control over your fork's air spring, allowing you to fine-tune the perfect amount of support for any trail. With 16 clicks of adjustability, Ramp Control V2 provides up to four volume spacers worth of ending stroke support - all without tools, extra parts, or multiple fill valves. Its speed-sensitive design adds more support the harder you push, ensuring you're always in control. The new valve architecture offers smoother gradation across the adjustment range, making it easy to find your ideal setup quickly, no matter the conditions. Stop wasting time with token-tinkering and get your suspension dialed-in instantly on the trail with MRP's Ramp Control V2 Cartridge. Model D (long body) is compatible with RockShox models: Pike 2015-2022 with "Boost" 15x110 axle spacing, Pike 2017+ (regardless of axle spacing), Revelation 2017-2022 (35mm) Recommended for 120 and 130mm 29 /27.5+ and 120mm 27.5 and 26 forks New valve architecture provides near-perfect gradation across the 16-click adjustment range, allowing you to quickly and effectively tune your spring support on-the-fly Ramp Control V2 aligns spring support with shaft speed providing greater effect when you're charging hard Ramp Control V2 provides up to four volume spacers worth of ending stroke support, right at your fingertips Upgraded knob provides a better tactile feel with or without gloves and makes it easier to count clicks while fine-tuning your suspension. MRP Ramp Control V2 Cartridge Air Springs & Parts UPC: 702430224819

by MRP

—$250

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 160mm air spring cartridge for the RXF38 m.2 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup Ohlins Complete Air Spring Cartridge Assembly Air Springs & Parts UPC: 840153644696

by Ohlins

—$225.23

This air spring shaft kits are used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins. This 130mm air spring shaft kit is used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins The original fork's top cap is reused; only the shaft assembly is replaced The kit includes the lower shaft assembly, all dynamic air piston seals, new circlips, and a new footnut The air shaft has 4 negative volume spacers installed from the factory, which are adjustable to customize the level of support and suppleness in addition to the adjustable volume in the main spring Interchangeable with RXF34 chassis Ohlins Air Spring Shaft Assembly Air Springs & Parts UPC: 840153641404

by Ohlins

—$12.02

This kit includes four small, pellet-shaped volume spacers, used to adjust the negative air volume found in the air spring shaft in the Ohlins RXF34 m.1 fork. Remove the negative volumes spacers for a more supple off-the-top feeling. Add spacers to gain more initial support and tire feel. Allows riders to customize the feel of their Ohlins RXC34 m.1 air spring Includes (4) spacers Remove spacers for an easier breakaway force or add spacers to gain more support and tire feel Only works on the XC-specific air spring in the Ohlins RXC34 m.1 fork Ohlins Suspension Fork Air Spring Negative Volume Spacer Air Springs & Parts UPC: 840153641466

by Ohlins

—$225.23

This air spring shaft kits are used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins. This 110mm air spring shaft kit is used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins The original fork's top cap is reused; only the shaft assembly is replaced The kit includes the lower shaft assembly, all dynamic air piston seals, new circlips, and a new footnut The air shaft has 4 negative volume spacers installed from the factory, which are adjustable to customize the level of support and suppleness in addition to the adjustable volume in the main spring Interchangeable with RXF34 chassis Ohlins Air Spring Shaft Assembly Air Springs & Parts UPC: 840153641381

by Ohlins

—$225.23

This air spring shaft kits are used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins. This 100mm air spring shaft kit is used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins The original fork's top cap is reused; only the shaft assembly is replaced The kit includes the lower shaft assembly, all dynamic air piston seals, new circlips, and a new footnut The air shaft has 4 negative volume spacers installed from the factory, which are adjustable to customize the level of support and suppleness in addition to the adjustable volume in the main spring Interchangeable with RXF34 chassis Ohlins Air Spring Shaft Assembly Air Springs & Parts UPC: 840153641374

by Ohlins

—$225.23

This air spring shaft kits are used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins. This 120mm air spring shaft kit is used to change the travel on the RXC34 m.1 cross-country series of race forks from Ohlins The original fork's top cap is reused; only the shaft assembly is replaced The kit includes the lower shaft assembly, all dynamic air piston seals, new circlips, and a new footnut The air shaft has 4 negative volume spacers installed from the factory, which are adjustable to customize the level of support and suppleness in addition to the adjustable volume in the main spring Interchangeable with RXF34 chassis Ohlins Air Spring Shaft Assembly Air Springs & Parts UPC: 840153641398

by Ohlins

—$306.34

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 200mm air spring cartridge for the DH38 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup Ohlins Complete Air Spring Cartridge Assembly Air Springs & Parts UPC: 840153640728

by Ohlins

—$250

These complete air spring cartridges for Ohlins forks feature their three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber. The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers. Complete Ohlins 180mm air spring cartridge for the RXF38 m.2 fork ONLY Features the three-chamber air spring system with two externally adjustable springs: adjust the main spring by adding air into the top valve, and control the progressivity by changing pressure on the bottom of the fork of the ramp-up chamber The third chamber is the negative spring, which can futher be customized by removing or adding up to two volume spacers (requires dissassembly) Cartridge ships with one negative volume spacer installed Includes a new bash cap to prevent damage to the air valve on the bottom Cartridge design allows easy travel change without removing the fork and allows the fork to be swapped between a coil spring setup Ohlins Complete Air Spring Cartridge Assembly Air Springs & Parts UPC: 840153644719

by Ohlins