Fork Parts / Service

—$190

RockShox XLoc Parts RockShox Xloc Parts Remotes & Parts UPC: 710845741784

by RockShox

—$32

FOX Low Friction Dust Wiper Kits Seal Kit UPC: 0821973530048

by FOX

—$63.80

The first step to achieving great suspension is selecting the correct spring. Ohlins offers a wide range of 7 fork spring rates for the RXF38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins RXF38 fork 50 lbs/in spring rate intended for riders weighing between 180 lbs to 200 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (50 lbs/in has blue bands) 191 mm of actual stroke 335 mm (+/- 3mm) free length 18.5 mm I.D. / 4.6 mm wire diameter Ohlins RXF38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642067

by Ohlins

—$49.02

The Ohlins lower leg seal kit includes blue SKF scrapers, foam rings and Sag/Travel o-ring for 100 hour chassis service. Lower leg seal kit for Ohlins RXF38 m.1 / m.2 and DH38 m.1 / m.2 forks Blue colored energized scrapers are made by SKF and ensure grit is pushed off without adding unnecessary friction Foam rings soaked in bath oil during installation ensure smooth action and no dirt bypassing into the bushings Include (2) blue scrapers, (2) foam rings, and (1) sag/travel o-ring Ohlins Lower Leg Seal Kit Seal Kit UPC: 840153641596

by Ohlins

—$89

FOX 36 SL suspension fork air shaft assemblies for service and repair. FOX 36 SL Air Shaft Assembly Air Springs & Parts UPC: 821973507767

by FOX

—$340

New for model year 2025 is the Fox GRIP X Damper. Built off of the foundation of the wildly successful GRIP2 damper, the GRIP X is built for utmost performance while keeping the adjustments relatively simple. The GRIP X shares most of the same structure of the GRIP X2 (which is more adjustable with high speed rebound) while weighing 120 grams less. This upgrade kit will fit any 2020 and newer Fox 38. This upgrade kit includes (1) Fox GRIP X damper which is compatible with all Fox 38 models. This upgrade allows you to independently adjust High & Low Speed Compression and Low Speed Rebound. Variable Valve Control (VVC) on the rebound circuit. Pair up your GRIP X fork damper with a DHX or Float X rear shock to maintain similar suspension performance and adjustability front and rear. GRIP X Damper requires the following FOX 4wt Suspension Oil - 1 liter FOX 38 Factory Series Grip X Damper Assembly Damper, Compression UPC: 821973496559

by FOX

—$85

The Charger 3.1 RC2 Piston Kit upgrades existing Charger 3 dampers to the NEW Charger 3.1. With increased damping range, Charger 3.1 RC2 is primed to take on any trail. Less compression damping in the Low Speed Compression open position and additional support in the High Speed Compression closed position gives you the traction, control, and comfort you need to charge dicey lines all day. Upgrades existing Charger 3 dampers to Charger 3.1 Includes piston assembly, tuning shims, and Head Valve Tool Compatible with BoXXer D1+ (2024+) Pike C1+(2023+), Lyrik D1+(2023+), and ZEB A1+(2021+) Charger 3 dampers RockShox Charger 3.1 RC2 Piston Kit Upgrade Damper, Compression UPC: 710845907821

by RockShox

—$45

Rudy XPLR Debonair shaft for repair and maintenance of Rockshox suspension. RockShox Rudy XPLR Debonair Shaft Air Springs & Parts UPC: 710845871757

by RockShox

—$39.50

Thru-axles engineered for a better ride! Designed and tested in the rugged conditions of Colorado, these thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look. A unique captive rotating thru-axle washer reduces friction on dropouts during installation, allowing for a precise fit and prevents damage when torquing. Whether you are looking to upgrade or replace an existing factory axle, these thru-axles will fit a wide variety of bike and fork models. Designed, machined and tested in Colorado, USA 5mm hex on both ends of the axle for easy installation and removal 7075 aluminum with hard anodized finish for extra durability Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage Axle length is compatible +/- 2mm An ideal replacement for OEM thru-axles Item Specifications Axle Diameter (mm) 12 Color Black Length 164 Overall Length (mm) 164 Rear Axle Type 12mm Thru-axle Thread Length (mm) 10 Thread Pitch 1.5 Wheels Manufacturing Rear Thru Axle Thru Axle UPC: 811079029393

by Wheels Manufacturing

—$420

RockShox 35mm Crown/Steerer/Uppertube Assemblies RockShox 35mm Crown/Steerer/Upper Tube Assembly Crown/Steerer/Uppertube Assembly UPC: 710845835568

by RockShox

—$245

RockShox 35mm Crown/Steerer/Uppertube Assemblies RockShox 35mm Crown/Steerer/Upper Tube Assembly Crown/Steerer/Uppertube Assembly UPC: 710845838385

by RockShox

—$43.99

MTB fork seals are a vital protective part of the overall front suspension system, with a crucial impact on riding comfort and trouble-free operation in the harshest environments. This completely redesigned fork seal - adding on to SKF's well established fork seals range that has already been available on the market for more than 10 years - consists of newly developed rubber compounds and new geometries for both the scraper lip and the sealing lip. The co-molded combination of compounds, together with improved sealing lip properties, offers enhanced followability on the shaft. In addition, there is a new metal insert and an open wound spring on the dirt scraper lip, effectively preventing the ingress of contaminants. Fits FOX Air 32mm, All Models Extended sealing capability Improved contamination exclusion Reliable protection of the interior fork mechanism Minimum friction for enhanced control SKF Dual Compound Seal Kit Seal Kit EAN: 8050616066008

by SKF

—$310

RockShox Fork Compression Dampers RockShox Fork Compression Dampers Damper, Compression UPC: 710845836886

by RockShox

—$6.99

Top Caps for Fox suspension fork service and repair. FOX Top Caps Adjuster Knob & External Hardware UPC: 611056171158

by FOX

—$341

FOX 34 Crown/Steerer/Uppertube Assembies for service and repair. FOX 34 Crown/Steerer/Uppertube Assemblies Crown/Steerer/Uppertube Assembly UPC: 821973422640

by FOX

—$410

FOX 36 Crown/Steerer/Uppertube Assembies for service and repair. FOX 36 Crown/Steerer/Uppertube Assemblies Crown/Steerer/Uppertube Assembly UPC: 821973456058

by FOX

—$158

32 Grip Damper Assembly for FOX suspension fork service and repair. FOX 32 Grip Damper Damper, Compression UPC: 611056149157

by FOX

—$45

DebonAir+ Air Shaft Assembly for RockShox suspension forks. RockShox DebonAir+ Air Shaft Assembly Upgrade Air Springs & Parts UPC: 710845878763

by RockShox

—$47

Lower Leg Bushings for Fox suspension fork service and repair. FOX Lower Leg Bushings Other Fork Part UPC: 611056191965

by FOX

—$331

FOX 36 Crown/Steerer/Uppertube Assembies for service and repair. FOX 36 Crown/Steerer/Uppertube Assemblies Crown/Steerer/Uppertube Assembly

by FOX

—$50

RockShox Seal Head Assemblies RockShox Fork Seal Head Air Springs & Parts UPC: 710845862922

by RockShox

—$26

Top Caps for Fox suspension fork service and repair. FOX Top Caps Adjuster Knob & External Hardware UPC: 611056146941

by FOX

—$325

Transform your existing RockShox Pike, Lyrik or Yari suspension fork into the ultimate trail fork. The ACS3 coil conversion kit combines small bump sensitivity, traction, and mid stroke support of a coil with the big hit performance of an air spring. By using coil springs, you can eliminate the constant maintenance required to keep your fork running optimally! Fits 2014-2017 RockShox Boost 27.5 Pike/2018-Current 27.5 and 29 Pike Includes Air Bump Stop, Spring Assembly, Lower Plunger Rod, retaining ring and travel indicator adapter Reduced friction for smoother overall fork performance Air Bump Stop cartridge technology to control the bigger hits towards the end of the travel PUSH Industries ACS3 Coil Component Kit RockShox Coil Springs & Parts UPC: 840031600103

by PUSH Industries

—$115

Make a good fork a great fork. Introducing the Luftkappe air piston kit for Fox Float forks. The Luftkappe is available for: 34 Float NA2 (2016-17) Performance & Factory Series (130mm + only - 120mm and lower need the 2018 Evol air shaft before a Luftkappe can be fitted) 34 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA (2015-17) Performance & Factory Series (max 180mm travel, min 120mm travel) Pinkbike: "The Luftkappe's change to the feel of the Lyrik was immediately noticeable on the trail. Traction was increased across chatter and the fork remained higher in its travel and more stable, improving the dynamic ride height without sacrificing the top end. My confidence soared when hitting sections with a lot of chatter and mid to large-sized hits, and the result meant more comfort and speed through such sections." Taking everything we learned with the Corset air sleeves and the Luftkappe we developed for the Pike, Yari & Lyrik, this second generation Luftkappe is a new air piston assembly for Fox's 34 NA2/Evol and 36 Evol forks. User installable and simple to set up, the Luftkappe transforms a good fork into a great fork. Softer initial stroke Larger negative air chamber Increased sag without the associated diving Coil-like initial & mid-stroke spring rate without excessive bottoming Increased sensitivity Improved mid stroke support & control Superior bump compliance and traction Reduced hand fatigue Reduces required compression damping Retains volume spacer compatibility Optional tools available for self-install What's included in the kit: 34 Evol: Upgrade low friction air piston assembly. 34 NA2: Upgrade low friction air piston assembly & upgrade low friction, low profile sealhead 36 Evol: Upgrade low friction air piston assembly. 36 NA: Upgrade low friction air piston assembly & upgrade topout spacer ring Note: If your 36 Evol tops out noticeably, you will need to replace your air shaft assembly before purchasing the Luftkappe. Fox have updated this part due to the topout issues that many of the 2018 36 Evol forks had. 34 forks do not have this issue. Relevant Fox part numbers for the new air shaft assemblies, by travel: 180mm: 820-02-534-KIT 170mm: 820-02-535-KIT 160mm: 820-02-536-KIT 150mm: 820-02-537-KIT 140mm: 820-02-538-KIT 100mm (36 831): 820-02-539-KIT If your fork does not have noticeable top-out issues, you don't need to replace the shaft before installing the Luftkappe. FAQ: 1. Can I install it myself? Yes, provided you have access to the supplies and tools listed in the installation instructions above. If you're really crafty (and EXTREMELY careful) it is possible to install the Luftkappes (all Evol variants) without the installation tools, however the risk of damaging things is much higher and we really don't recommend trying. If you choose to take this route and damage your air shaft (or anything else), we cannot be held responsible - we make the tools available for a reason. It is not possible to install the 34 NA2 Luftkappe kit without 10mm shaft clamps and the bullet tool - you'll damage the shaft AND damage the seals on the new sealhead. 2. Does it work with TALAS forks? No, sorry. 3. Does it work with versions of the 36 prior to 2015? No, sorry! 4. Does it work with 32s or 40s? No, sorry. 5. How does it actually work? It enlarges the negative air chamber to reduce the initial spring rate. This lets you run higher air pressure for more support in the middle and end of the stroke with improved sensitivity in the start of the stroke. 6. Is it compatible with MRP's Ramp Control cartridge? Generally speaking no. If you are running your fork at least 30mm shorter than its maximum available travel, then yes. 7. Shouldn't I just buy a new fork instead? Sure, they're about the same price as the Luftkappe. 8. What parts does it actually replace in the air spring? It replaces the plastic piston itself, and the rubber topout bumper in the 34s is removed but not replaced (36 topout assembly is unchanged). You reuse your air shaft, though the 34NA2 kit comes with a replacement low friction, low profile sealhead comparable in size to the stock 2018 Evol sealhead. This is also why the NA2 kit is more expensive than the other two - it's basically a 2018 Factory update on top of a Luftkappe. 9. Who is this NOT suited for? The Luftkappe is outright superior to the stock air spring for nearly everyone, however there are a few cases where it might not be for you: - If you run your 36 at 180mm, it will be quite progressive. You may like it, but you may also find it hard to use the last 5-10mm of travel - if this would bother you then have a think about it first. At 170mm and below it will be fine. - If you like running really low sag for some reason. The Luftkappe runs more sag than the stock fork, but is firmer in the mid stroke - similar to a coil fork, but with ending-stroke ramp up to prevent harsh bottoming. If you're the kind of person who wants the fork to run 5% sag, this isn't for you. We could point out that a setup like that probably just means your handlebars are set too low and you're compensating with oversprung suspension, but we aren't here to judge you, so maybe just don't buy it. - If you're anal about your fork having an exact (but rounded-to-the-nearest-10mm) amount of travel. Because the Luftkappe balances forces at a pneumatic topout, the force right around topout is very low (literally zero other than friction), meaning the weight of the bike alone will cause it to sag a few millimetres. Your car's suspension sags under the vehicle's own weight, so should your bike - unless it was so sticky, overly stiff or over-preloaded that 10kg of bike weight wasn't enough to cause your suspension to move at all, of course. If only having an apparent 148mm out of a 150mm fork is a big deal for you, stick with the stock fork. (in)Compatibility Information: Luftkappe IS available for: 34 Float NA2 (Performance, Performance Elite and Factory Series, 2016-17), 130mm and higher travel 34 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA1 (NA) Not compatible with: Rhythm-series forks E-bike specific forks Non-Evol (pre-2018) 36 forks 34mm forks for 29" wheels with 150mm or more travel Pre-2016 34 forks Pre-2016 34 forks that were later updated with the factory NA air system update Any TALAS forks Any 32mm forks Any 40mm forks Vorsprung Luftkappe Air Springs & Parts

by Vorsprung

—$125

Make a good fork a great fork. Introducing the Luftkappe air piston kit for Fox Float forks. The Luftkappe is available for: 34 Float NA2 (2016-17) Performance & Factory Series (130mm + only - 120mm and lower need the 2018 Evol air shaft before a Luftkappe can be fitted) 34 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA (2015-17) Performance & Factory Series (max 180mm travel, min 120mm travel) Pinkbike: "The Luftkappe's change to the feel of the Lyrik was immediately noticeable on the trail. Traction was increased across chatter and the fork remained higher in its travel and more stable, improving the dynamic ride height without sacrificing the top end. My confidence soared when hitting sections with a lot of chatter and mid to large-sized hits, and the result meant more comfort and speed through such sections." Taking everything we learned with the Corset air sleeves and the Luftkappe we developed for the Pike, Yari & Lyrik, this second generation Luftkappe is a new air piston assembly for Fox's 34 NA2/Evol and 36 Evol forks. User installable and simple to set up, the Luftkappe transforms a good fork into a great fork. Softer initial stroke Larger negative air chamber Increased sag without the associated diving Coil-like initial & mid-stroke spring rate without excessive bottoming Increased sensitivity Improved mid stroke support & control Superior bump compliance and traction Reduced hand fatigue Reduces required compression damping Retains volume spacer compatibility Optional tools available for self-install What's included in the kit: 34 Evol: Upgrade low friction air piston assembly. 34 NA2: Upgrade low friction air piston assembly & upgrade low friction, low profile sealhead 36 Evol: Upgrade low friction air piston assembly. 36 NA: Upgrade low friction air piston assembly & upgrade topout spacer ring Note: If your 36 Evol tops out noticeably, you will need to replace your air shaft assembly before purchasing the Luftkappe. Fox have updated this part due to the topout issues that many of the 2018 36 Evol forks had. 34 forks do not have this issue. Relevant Fox part numbers for the new air shaft assemblies, by travel: 180mm: 820-02-534-KIT 170mm: 820-02-535-KIT 160mm: 820-02-536-KIT 150mm: 820-02-537-KIT 140mm: 820-02-538-KIT 100mm (36 831): 820-02-539-KIT If your fork does not have noticeable top-out issues, you don't need to replace the shaft before installing the Luftkappe. FAQ: 1. Can I install it myself? Yes, provided you have access to the supplies and tools listed in the installation instructions above. If you're really crafty (and EXTREMELY careful) it is possible to install the Luftkappes (all Evol variants) without the installation tools, however the risk of damaging things is much higher and we really don't recommend trying. If you choose to take this route and damage your air shaft (or anything else), we cannot be held responsible - we make the tools available for a reason. It is not possible to install the 34 NA2 Luftkappe kit without 10mm shaft clamps and the bullet tool - you'll damage the shaft AND damage the seals on the new sealhead. 2. Does it work with TALAS forks? No, sorry. 3. Does it work with versions of the 36 prior to 2015? No, sorry! 4. Does it work with 32s or 40s? No, sorry. 5. How does it actually work? It enlarges the negative air chamber to reduce the initial spring rate. This lets you run higher air pressure for more support in the middle and end of the stroke with improved sensitivity in the start of the stroke. 6. Is it compatible with MRP's Ramp Control cartridge? Generally speaking no. If you are running your fork at least 30mm shorter than its maximum available travel, then yes. 7. Shouldn't I just buy a new fork instead? Sure, they're about the same price as the Luftkappe. 8. What parts does it actually replace in the air spring? It replaces the plastic piston itself, and the rubber topout bumper in the 34s is removed but not replaced (36 topout assembly is unchanged). You reuse your air shaft, though the 34NA2 kit comes with a replacement low friction, low profile sealhead comparable in size to the stock 2018 Evol sealhead. This is also why the NA2 kit is more expensive than the other two - it's basically a 2018 Factory update on top of a Luftkappe. 9. Who is this NOT suited for? The Luftkappe is outright superior to the stock air spring for nearly everyone, however there are a few cases where it might not be for you: - If you run your 36 at 180mm, it will be quite progressive. You may like it, but you may also find it hard to use the last 5-10mm of travel - if this would bother you then have a think about it first. At 170mm and below it will be fine. - If you like running really low sag for some reason. The Luftkappe runs more sag than the stock fork, but is firmer in the mid stroke - similar to a coil fork, but with ending-stroke ramp up to prevent harsh bottoming. If you're the kind of person who wants the fork to run 5% sag, this isn't for you. We could point out that a setup like that probably just means your handlebars are set too low and you're compensating with oversprung suspension, but we aren't here to judge you, so maybe just don't buy it. - If you're anal about your fork having an exact (but rounded-to-the-nearest-10mm) amount of travel. Because the Luftkappe balances forces at a pneumatic topout, the force right around topout is very low (literally zero other than friction), meaning the weight of the bike alone will cause it to sag a few millimetres. Your car's suspension sags under the vehicle's own weight, so should your bike - unless it was so sticky, overly stiff or over-preloaded that 10kg of bike weight wasn't enough to cause your suspension to move at all, of course. If only having an apparent 148mm out of a 150mm fork is a big deal for you, stick with the stock fork. (in)Compatibility Information: Luftkappe IS available for: 34 Float NA2 (Performance, Performance Elite and Factory Series, 2016-17), 130mm and higher travel 34 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA1 (NA) Not compatible with: Rhythm-series forks E-bike specific forks Non-Evol (pre-2018) 36 forks 34mm forks for 29" wheels with 150mm or more travel Pre-2016 34 forks Pre-2016 34 forks that were later updated with the factory NA air system update Any TALAS forks Any 32mm forks Any 40mm forks Vorsprung Luftkappe Air Springs & Parts

by Vorsprung

—$395

RockShox 35mm Crown/Steerer/Uppertube Assemblies Item Specifications keyword search 11.4018.008.423 keyword search 114018008423 RockShox 35mm Crown/Steerer/Upper Tube Assembly Crown/Steerer/Uppertube Assembly UPC: 710845769696

by RockShox

—$307

RockShox 32mm Crown/Steerer/Uppertube Assemblies Item Specifications keyword search 11.4018.008.344 keyword search 114018008344 RockShox 32mm Crown/Steerer/Upper Tube Assembly Crown/Steerer/Uppertube Assembly UPC: 710845751851

by RockShox

—$63.80

The first step to achieving great suspension is selecting the correct spring. hlins offers a wide range of 7 fork spring rates for the DH38, ensuring a proper ride regardless of the rider's weight, speed, or terrain. Only intended for use in the Ohlins DH38 fork 50 lbs/in spring rate intended for riders weighing between 180 lbs to 200 lbs Travel range is 130mm-180mm Has three colored bands to identify spring rate (50 lbs/in has blue bands) 212 mm of actual stroke 408 mm (+/- 4mm) free length 18.5 mm I.D. / 4.6 mm wire diameter Ohlins DH38 Front Fork Coil Spring Coil Springs & Parts UPC: 840153642135

by Ohlins

—$42.89

The Ohlins lower leg seal kit includes blue SKF scrapers, foam rings and Sag/Travel o-ring for 100 hour chassis service. Lower leg seal kit for Ohlins RXF34 and RXC34 forks with 34mm stancions Blue colored energized scrapers are made by SKF and ensure grit is pushed off without adding unnecessary friction Foam rings soaked in bath oil during installation ensure smooth action and no dirt bypassing into the bushings Include (2) blue scrapers, (2) foam rings, and (1) sag/travel o-ring Ohlins Lower Leg Seal Kit Seal Kit UPC: 840153623684

by Ohlins

—$45.33

The Ohlins lower leg seal kit includes blue SKF scrapers, foam rings and Sag/Travel o-ring for 100 hour chassis service. Lower leg seal kit for all RXF36-series forks (Original, EVO, m.2, and m.3) Blue colored energized scrapers are made by SKF and ensure grit is pushed off without adding unnecessary friction Foam rings soaked in bath oil during installation ensure smooth action and no dirt bypassing into the bushings Include (2) blue scrapers, (2) foam rings, and (1) sag/travel o-ring Ohlins Lower Leg Seal Kit Seal Kit UPC: 840153641534

by Ohlins

—$70.81

Ohlins complete fork seal head assembly for all Ohlins 3-chamber air cartridge forks. The kit includes an updated m.2-spec "L-cup" scraper to ensure less oil and dirt ingestion, also increasing negative volume. Great upgrade for older RXF forks. Complete seal head replacement for all Ohlins forks with 3-chamber air spring cartridges Blue seal head features an upgraded scraper that significantly reduces oil ingestion, enabling the use of more bath oil The "Blue" seal head also has more negative volume available, which means a more supple off-the-top feel, and helps combat initial stiction Includes a white volume spacer pre-installed to help tune the negative air volume Retrofittable to all 3-chamber forks: RXF 36, 38, and DH38 Ohlins Air Spring Seal Head Assembly Air Springs & Parts UPC: 840153641558

by Ohlins

—$49.02

The Ohlins air spring tube rebuild kit for their forks that have a 3-chamber air spring cartridge provides a more economical way to change travel/stroke. Includes a 160 mm air tube and 2 sealing o-rings Relatively easy and economical travel change Interchangeable air tubes works with all Ohlins 3-chamber forks Intended for RXF fork series: RXF 36 m.2 (all) maximum travel: 180mm / RXF36 m.3 (29 wheel version) maximum travel: 160mm / RXF36 m.3 (27.5 wheel version) maximum travel: 170mm /170mm / RXF38 m.1, m.2, m.3 maximum travel: 180mm Provides a more economical way to change stroke however, requires 26mm shaft clamps, Loctite 577, a cassette lockring tool, and a good set of Knipex to hold the sealhead while unthreading (all required tools and supplies sold separately) These air tubes are universal within the Ohlins 3-chamber air spring system, so be sure to not exceed the travel maximums set by the bushing overlap on each fork (e.g., don't put a 180mm air tube into an RXF36 m.3) Ohlins Air Spring Tube Rebuild Kit Air Springs & Parts UPC: 840153640391

by Ohlins

—$198

The Ohlins coil spring kit for DH38 suspension fork allows the rider to swap from the standard air spring to a coil spring setup. Due to the unique Ohlins air cartridge design, the fork can be exchanged between coil and air indefinitely. Experience the lower friction, initial suppleness, and lack of maintenance a coil spring offers. Two important notes: The actual spring IS NOT INCLUDED (Sold Separately). Requires Ohlins coil tool for installation (Sold Separately). Intended for DH38 fork series Kit includes the top cap with adjustable preload and the bottom coil shaft (Spring Sold Separately) Adjustable travel from 160 mm up to 200 mm Arrives from the factory set up in 200mm Allows riders to indefinitely swap between air and coil spring options Requires Ohlins coil tool for installation (Sold Separately) Ohlins DH38 Coil Spring Kit Coil Springs & Parts UPC: 840153642784

by Ohlins

—$434.50

hlins offers four different crown sets for DH38 suspension fork that differ in offset, allowing riders to further customize their ride. Offset is the distance between the wheel axle and the steerer tube and affects how the bike steers by changing the "trail" dimension. There are three different offsets: 46mm, 50mm, 54mm, and 58mm. Typically, shorter offsets are more stable but require more steering input to change direction. The opposite is true, too; the longer the offset, the easier it is to steer, but it will be less stable at speed. Most DH bikes with 29" wheels use 58mm and 54mm offset, while DH bikes with 27.5" front wheels use 46mm. Provides 54mm offset to DH38 suspension forks Includes one lower crown with a straight 1.125" steerer tube pressed in Includes two upper crowns; one flat, one drop crown Comes with two rubber fork bumpers M6 x 16 clamp bolts Black Anodized Finish Ohlins DH38 Suspension Fork Crownset Crown/Steerer/Uppertube Assembly UPC: 840153633508

by Ohlins

—$116

36 Air Shaft Assembly for Fox suspension forks. FOX 36 Air Shaft Assembly Air Springs & Parts UPC: 821973507743

by FOX

—$89

FOX 36 SL suspension fork air shaft assemblies for service and repair. FOX 36 SL Air Shaft Assembly Air Springs & Parts UPC: 821973507927

by FOX

—$89

FOX 36 SL suspension fork air shaft assemblies for service and repair. FOX 36 SL Air Shaft Assembly Air Springs & Parts UPC: 821973507798

by FOX

—$395

Built with input from the world's best riders, Charger 3.1 RC2 is a brilliant evolution of SRAM's proven damper platform. With increased damping range and High Speed Compression (HSC), Low Speed Compression (LSC), and Low Speed Rebound adjustments, Charger 3.1 RC2 smooths out the roughest trails. Compatible with RockShox FS-ZEB-R-A1, FS-ZEB-SEL-A1, FS-ZEB-SEL-A2, FS-ZEB-ULT-A1, FS-ZEB-ULT-A2, FS-ZEB-ULT-A3 Charger 3.1 RC2 s adjustment range is broader with less compression damping in the LSC open position and additional support in the HSC closed position, this gives you the traction, control, and comfort you need to charge dicey lines all day Includes full right-side internals including controls High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments Includes vibration-fighting ButterCups to block 20% of trail chatter RockShox Charger 3.1 RC2 Damper Upgrade Kit Damper, Compression UPC: 710845907814

by RockShox

—$47

Replacement steel spring kits for tuning Marzocchi suspension forks. Marzocchi Bomber Z1 Coil Spring Kit Coil Springs & Parts UPC: 821973472430

by Marzocchi

—$35

Built with input from the world's best riders, Charger 3.1 RC2 is a brilliant evolution of SRAM's proven damper platform. With increased damping range and High Speed Compression (HSC), Low Speed Compression (LSC), and Low Speed Rebound adjustments, Charger 3.1 RC2 smooths out the roughest trails. Includes shims for compression/rebound tune configurations and piston tool Compatible with RockShox FS-BXR-ULT-D1, FS-LYRK-SEL-D1, FS-LYRK-ULT-D1, FS-LYRK-ULT-D2, FS-PIKE-SEL-C1, FS-PIKE-ULT-C1, FS-PIKE-ULT-C2, FS-ZEB-R-A1, FS-ZEB-SEL-A1, FS-ZEB-SEL-A2, FS-ZEB-ULT-A1, FS-ZEB-ULT-A2, FS-ZEB-ULT-A3 Charger 3.1 RC2 s adjustment range is broader with less compression damping in the LSC open position and additional support in the HSC closed position, this gives you the traction, control, and comfort you need to charge dicey lines all day Includes full right-side internals including controls High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments Includes vibration-fighting ButterCups to block 20% of trail chatter RockShox Charger 3.1 RC2 Damper Upgrade Kit Damper, Compression UPC: 710845910180

by RockShox

—$50

RockShox DebonAir+ Air Shaft for Pike C1+ Suspension Forks. Includes Air Shaft and Bumpers Buttercup and non-Buttercup compatible Compatible with RockShox FS-PIKE-SEL-C1, FS-PIKE-UFA-C2, FS-PIKE-ULT-C1, FS-PIKE-ULT-C2 RockShox Pike C1+ V2 DebonAir+ Air Shaft Air Springs & Parts UPC: 710845910043

by RockShox

—$370

RockShox 38mm Crown/Steerer/Uppertube Assemblies for service and repair. RockShox 38mm Crown/Steerer/Upper Tube Assembly Crown/Steerer/Uppertube Assembly UPC: 710845897467

by RockShox

—$60

Debonair Shafts for repair and maintenance of Rockshox SID and SID SL suspension forks. RockShox SID / SID SL Debonair Air Shaft Air Springs & Parts UPC: 710845897405

by RockShox

—$39.95

The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. Revised design features an o-ring for compatibility with Wolf Tooth Axle Handle Multi-Tool Similar to Fox Kabolt axle Designed and manufactured in Minneapolis, MN USA 7075 T6 Aluminum Item Specifications Axle Diameter (mm) 15 Color Black Over Locknut (mm) 100 Overall Length (mm) 145 Thread Length (mm) 15 Thread Pitch 1.5 Weight 49 Wolf Tooth Front Thru Axles Thru Axle UPC: 810006807295

by Wolf Tooth

—$43.99

MTB fork seals are a vital protective part of the overall front suspension system, with a crucial impact on riding comfort and trouble-free operation in the harshest environments. This completely redesigned fork seal - adding on to SKF's well established fork seals range that has already been available on the market for more than 10 years - consists of newly developed rubber compounds and new geometries for both the scraper lip and the sealing lip. The co-molded combination of compounds, together with improved sealing lip properties, offers enhanced followability on the shaft. In addition, there is a new metal insert and an open wound spring on the dirt scraper lip, effectively preventing the ingress of contaminants. Fits Rockshox 32mm Extended sealing capability Improved contamination exclusion Reliable protection of the interior fork mechanism Minimum friction for enhanced control SKF Dual Compound Seal Kit Seal Kit EAN: 8050616065865

by SKF

—$74

38 Rhythm Air Shaft Assembly for FOX suspension service and repair. FOX 38 Rhythm Air Shaft Assembly Air Springs & Parts UPC: 821973461977

by FOX

—$74

38 Rhythm Air Shaft Assembly for FOX suspension service and repair. FOX 38 Rhythm Air Shaft Assembly Air Springs & Parts UPC: 821973462011

by FOX

—$74

38 Rhythm Air Shaft Assembly for FOX suspension service and repair. FOX 38 Rhythm Air Shaft Assembly Air Springs & Parts UPC: 821973462028

by FOX

—$294

FOX 36 Lower Leg Assembies for service and repair. FOX 36 Lower Leg Assembly Lower Leg Assembly UPC: 821973396828

by FOX

—$394

FOX 38 Crown/Steerer/Uppertube Assembies for service and repair. FOX 38 Crown/Steerer/Uppertube Assemblies Crown/Steerer/Uppertube Assembly UPC: 821973421674

by FOX