Components

—$2,395

Berd Hawk27 Wheels with I9 Solix Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: I9 Solix Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,095

Berd Hawk27 Wheels with Talon Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: Talon Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,395

Berd Hawk27 Wheels with I9 Solix Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: I9 Solix Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,095

Berd Hawk27 Wheels with Talon Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: Talon Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,095

Berd Hawk27 Wheels with Talon Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: Talon Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,095

Berd Hawk27 Wheels with Talon Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: Talon Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,095

Berd Hawk27 Wheels with Talon Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: Talon Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,095

Berd Hawk27 Wheels with Talon Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: Talon Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,395

Berd Hawk27 Wheels with I9 Solix Hubs Berd's new HAWK27 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made entirely in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Ideal for cross country and trail racing and riding, the new HAWK27 wheels combine lightweight and vibration damping Berd spokes with 27 mm internal carbon rims. The HAWK27 rims are only 18 mm deep, which are the lowest profile 27 mm internal double-wall carbon rims ever made. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK27 wheelset is built around our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub. HAWK27 is also available with Boost Industry Nine Solix Centerlock hubs, delivering almost instantaneous engagement, long-term reliability, and an impressively low weight. Superboost wheels will be built using the Industry Nine Hydra hubs. These Berd wheels are also available to be ordered using the Onyx Hook Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Technical Specifications: Wheelset Weight: Industry Nine Solix - 1,295 grams Berd Talon - 1,400 grams Onyx Vesper Hook Flange - 1,450 grams Internal Rim Width: 27 mm Rim Size: 29" Spoke Count: 28h (Front and Rear) Hub Model: I9 Solix Hub Spacing: 148 Boost / 110 Front Boost Disc Brake Type: Centerlock Tire Compatibility: 2.1" - 2.7" Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Maximum Tire Pressure: 45 PSI Warranty: Berd's 5 Year Limited Warranty Suggested Weight Limit: 280 lbs BERD Hawk27 Wheelset

by BERD

—$2,395

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: I9 Hydra Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,395

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: I9 Hydra Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,095

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Talon Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,395

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: I9 Hydra Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,395

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: I9 Hydra Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,095

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Talon Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,095

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Talon Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,095

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Talon Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,095

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Talon Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$2,095

Berd's new HAWK30 wheels are the product of a partnership between Berd and We Are One Composites to deliver spokes and rims made in North America. We Are One is located in Kamloops British Columbia, Canada, and Berd is located in Hopkins, MN. Light enough for XC racing but tough enough for gnarly trail rips and enduro runs, the HAWK30 wheels combine lightweight and vibration damping Berd spokes with 30 mm internal carbon rims. The HAWK30 rims are only 18 mm deep. This unique design yields engineered radial compliance and high lateral stiffness. The combination of vibration damping Berd spokes and our new radial compliant rim means more speed over rough terrain and less rider fatigue. With a wide 3.75 mm rim lip, Berd's new rims spread out tire/rim impacts across a larger surface area to prevent tire and rim damage during acute impacts. The HAWK30 wheelset is built around either our flagship Berd Talon Hub featuring hooked hub flanges designed to work specifically with Berd spokes along with a dual-sprung 54t ratchet freehub or Industry Nine Hydra Centerlock hubs, delivering almost instantaneous engagement and long-term reliability. These Berd wheels are also available to be ordered using the Onyx Hook Vesper Flange Hub System. This option is available in 12x142 (including single speed), 12x148, and 12x157 super boost rear spacing. Please allow up to 4-6 weeks for delivery of wheels with Onyx hubs. Specifications Wheel Size: 29" Front Hub Spacing: 15x110mm Rear Hub Spacing: 12x148mm Hub Model: Talon Freehub: Microspline Hole Count: 28 Brake Type: Centerlock External Rim Width: 37.5mm Internal Rim Width: 30mm Recommended Tire Width: 2.2" - 2.5" Wheelset Weight: Industry Nine - 1,394 grams Berd Talon - 1,444 grams Onyx Vesper Hook Flange - 1,494 grams Tubeless Ready: Yellow Berd rim tape and Stans No Tubes valves installed Suggested Weight Limit: 280 lbs Lifetime Warranty BERD Hawk30 Wheelset

by BERD

—$225

Onyx Vesper hubs transfer the precise amount of torque you want to the ground when you need it. Nasty climbs on boulders and rock require just the right amount of instantaneous power but only at your command. There is no substitute for absolute control of your machine. Uphill or downhill, Onyx ceramic hybrid bearings get you rolling faster and with less effort.Vesper hubs are the lightest MTB hubs from Onyx, intended for cross-country and trail use Item Specifications Bearing Type Sealed Cartridge Center to Flange, Left 26.8 Center to Flange, Right 42.3 Color Black Defined Color Black Flange Diameter, Left 57 Flange Diameter, Right 42 Front Axle 15mm Thru x 110mm Hub Drilling 28 Hub/Brake Compatibility 6-Bolt Disc Spoke Interface J-Bend Weight 176 ONYX Racing Products Vesper Front Hub Front Hub

by ONYX Racing Products

—$579

Boost rear hubs are designed as precision mountain tools. Featuring one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost hubs have heavy-duty bearing seals and a threaded driveshell seal ring. Canted flanges for stronger wheel builds Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement Easily serviceable with a T10 Torx and pick or pen knife Specifically designed for "BOOST" 148mm x 12mm axle standard Engineered, manufactured, and assembled in Portland, Oregon USA with King Lifetime Warranty Item Specifications Bearing Type Sealed Cartridge Cassette Body Type SRAM XD Color Black Defined Color Black Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend Chris King Boost Rear Hub Rear Hub UPC: 841529251531

by Chris King

—$579

R45D hubs combine low-drag 45-tooth RingDrive system, a lightweight hub body, and legendary made-in-house bearings. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the superior responsiveness of our RingDrive engagement system when you put the power down. Patented RingDrive system with 45 simultaneously engaged points of contact for virtually drag free engagement Easily serviceable and completely re-buildable with our R45 Hub Service Tool Item Specifications Bearing Type Sealed Cartridge Cassette Body Type SRAM XDR Color Black Defined Color Black Hub Drilling 24 Hub/Brake Compatibility Center-Lock Disc Rear Axle 12mm Thru x 142mm Skewer Included No Spoke Interface J-Bend Chris King R45D Rear Hub Rear Hub UPC: 841529244663

by Chris King

—$579

R45D hubs combine low-drag 45-tooth RingDrive system, a lightweight hub body, and legendary made-in-house bearings. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the superior responsiveness of our RingDrive engagement system when you put the power down. Patented RingDrive system with 45 simultaneously engaged points of contact for virtually drag free engagement Easily serviceable and completely re-buildable with our R45 Hub Service Tool Item Specifications Bearing Type Sealed Cartridge Cassette Body Type SRAM XDR Color Black Defined Color Black Hub Drilling 28 Hub/Brake Compatibility Center-Lock Disc Rear Axle 12mm Thru x 142mm Skewer Included No Spoke Interface J-Bend Chris King R45D Rear Hub Rear Hub UPC: 841529244694

by Chris King

—$579

R45D hubs combine low-drag 45-tooth RingDrive system, a lightweight hub body, and legendary made-in-house bearings. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the superior responsiveness of our RingDrive engagement system when you put the power down. Patented RingDrive system with 45 simultaneously engaged points of contact for virtually drag free engagement Easily serviceable and completely re-buildable with our R45 Hub Service Tool Item Specifications Bearing Type Sealed Cartridge Cassette Body Type SRAM XDR Color Black Defined Color Black Hub Drilling 32 Hub/Brake Compatibility Center-Lock Disc Rear Axle 12mm Thru x 142mm Skewer Included No Spoke Interface J-Bend Chris King R45D Rear Hub Rear Hub UPC: 841529244700

by Chris King

—$579

Boost rear hubs are designed as precision mountain tools. Featuring one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost hubs have heavy-duty bearing seals and a threaded driveshell seal ring. Canted flanges for stronger wheel builds Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement Easily serviceable with a T10 Torx and pick or pen knife Specifically designed for "BOOST" 148mm x 12mm axle standard Engineered, manufactured, and assembled in Portland, Oregon USA with King Lifetime Warranty Item Specifications Bearing Type Sealed Cartridge Cassette Body Type Shimano Micro Spline Color Matte Black Defined Color Black Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend Chris King Boost Rear Hub Rear Hub UPC: 841529251630

by Chris King

—$579

Boost rear hubs are designed as precision mountain tools. Featuring one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost hubs have heavy-duty bearing seals and a threaded driveshell seal ring. Canted flanges for stronger wheel builds Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement Easily serviceable with a T10 Torx and pick or pen knife Specifically designed for "BOOST" 148mm x 12mm axle standard Engineered, manufactured, and assembled in Portland, Oregon USA with King Lifetime Warranty Item Specifications Bearing Type Sealed Cartridge Cassette Body Type SRAM XD Color Matte Black Defined Color Black Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend Chris King Boost Rear Hub Rear Hub UPC: 841529251654

by Chris King

—$579

R45D hubs combine low-drag 45-tooth RingDrive system, a lightweight hub body, and legendary made-in-house bearings. The result is the increased power and modulation of disc brakes, the fast, smooth rolling speed of our bearings, and the superior responsiveness of our RingDrive engagement system when you put the power down. Patented RingDrive system with 45 simultaneously engaged points of contact for virtually drag free engagement Easily serviceable and completely re-buildable with our R45 Hub Service Tool Item Specifications Bearing Type Sealed Cartridge Cassette Body Type Shimano HG Cassette Body Type Shimano HG 11/12-Speed Road Color Black Defined Color Black Hub Drilling 28 Hub/Brake Compatibility Center-Lock Disc Rear Axle 12mm Thru x 142mm Skewer Included No Spoke Interface J-Bend Chris King R45D Rear Hub Rear Hub UPC: 841529244670

by Chris King

—$579

Boost rear hubs are designed as precision mountain tools. Featuring one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost hubs have heavy-duty bearing seals and a threaded driveshell seal ring. Canted flanges for stronger wheel builds Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement Easily serviceable with a T10 Torx and pick or pen knife Specifically designed for "BOOST" 148mm x 12mm axle standard Engineered, manufactured, and assembled in Portland, Oregon USA with King Lifetime Warranty Item Specifications Bearing Type Sealed Cartridge Cassette Body Type Shimano Micro Spline Color Black Defined Color Black Hub Drilling 28 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend Chris King Boost Rear Hub Rear Hub UPC: 841529244465

by Chris King

—$621

Boost rear hubs are designed as precision mountain tools. Featuring one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost hubs have heavy-duty bearing seals and a threaded driveshell seal ring. Canted flanges for stronger wheel builds Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement Easily serviceable with a T10 Torx and pick or pen knife Specifically designed for "BOOST" 148mm x 12mm axle standard Engineered, manufactured, and assembled in Portland, Oregon USA with King Lifetime Warranty Item Specifications Bearing Type Sealed Cartridge Cassette Body Type Shimano Micro Spline Color Matte Black/Gold Defined Color Black Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend Chris King Boost Rear Hub Rear Hub UPC: 841529245370

by Chris King

—$621

Boost rear hubs are designed as precision mountain tools. Featuring one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost hubs have heavy-duty bearing seals and a threaded driveshell seal ring. Canted flanges for stronger wheel builds Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement Easily serviceable with a T10 Torx and pick or pen knife Specifically designed for "BOOST" 148mm x 12mm axle standard Engineered, manufactured, and assembled in Portland, Oregon USA with King Lifetime Warranty Item Specifications Bearing Type Sealed Cartridge Cassette Body Type SRAM XD Color Matte Black/Gold Defined Color Black Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend Chris King Boost Rear Hub Rear Hub UPC: 841529245394

by Chris King

—$579

Boost rear hubs are designed as precision mountain tools. Featuring one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost hubs have heavy-duty bearing seals and a threaded driveshell seal ring. Canted flanges for stronger wheel builds Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement Easily serviceable with a T10 Torx and pick or pen knife Specifically designed for "BOOST" 148mm x 12mm axle standard Engineered, manufactured, and assembled in Portland, Oregon USA with King Lifetime Warranty Item Specifications Bearing Type Sealed Cartridge Cassette Body Type Shimano Micro Spline Color Black Defined Color Black Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend Chris King Boost Rear Hub Rear Hub UPC: 841529251517

by Chris King

—$579

Boost rear hubs are designed as precision mountain tools. Featuring one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost hubs have heavy-duty bearing seals and a threaded driveshell seal ring. Canted flanges for stronger wheel builds Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement Easily serviceable with a T10 Torx and pick or pen knife Specifically designed for "BOOST" 148mm x 12mm axle standard Engineered, manufactured, and assembled in Portland, Oregon USA with King Lifetime Warranty Item Specifications Bearing Type Sealed Cartridge Cassette Body Type Shimano Micro Spline Color Matte Black Defined Color Black Hub Drilling 28 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 148mm Skewer Included No Spoke Interface J-Bend Chris King Boost Rear Hub Rear Hub UPC: 841529251579

by Chris King

—$219.99

OneUp Components Hubs Freehub Body Sold Separately Click Freehubs Here These are the hubs we want on our bikes. Lightweight, durable, with high quality bearings and seals to give you the best combination of performance, durability and price. Available in a range of 7 colors. This is the new benchmark for no-nonsense hubs Light enough for XC racing but strong enough for eunduro abuse and E-Bikes. The 7075 aluminum hub shell with integrated drive ring is super light and strong. OneUp's simple hub design has fewer parts to reduce weight, increase reliability and makes maintenance a breeze. Spacing: Boost front and rear Holes: 28 and 32 Engagement: 44 points, 8.2 degrees Weight front: 142g Weight rear: 220g Colors: Black, red, green, blue, orange, purple, grey Material: 7075 T6 Aluminum Freehub options: XDr, Microspline, HG Spokes: J-Bend only End Caps: tool free installation Bearings: Front - MR17287, Rear 6902, Freehub 6802 Enduro silicone freewheel seal Freehubs supplied with Dumonde Pro-x Grease OneUp Rear Hub 32H Rear Hub UPC: 0628219407306

by OneUp

—$99.99

OneUp Components Hubs These are the hubs we want on our bikes. Lightweight, durable, with high quality bearings and seals to give you the best combination of performance, durability and price. Available in a range of 7 colors. This is the new benchmark for no-nonsense hubs Light enough for XC racing but strong enough for eunduro abuse and E-Bikes. The 7075 aluminum hub shell with integrated drive ring is super light and strong. OneUp's simple hub design has fewer parts to reduce weight, increase reliability and makes maintenance a breeze. Spacing: Boost front and rear Holes: 28 and 32 Engagement: 44 points, 8.2 degrees Weight front: 142g Weight rear: 220g Colors: Black, red, dark green, dark blue, orange, purple, silver Material: 7075 T6 Aluminum Freehub options: XDr, Microspline, HG Spokes: J-Bend only End Caps: tool free installation Bearings: Front - MR17287, Rear 6902, Freehub 6802 Enduro silicone freewheel seal Freehubs supplied with Dumonde Pro-x Grease OneUp Front Hub 32H Front Hub UPC: 0628219407092

by OneUp

—$99.99

OneUp Components Hubs These are the hubs we want on our bikes. Lightweight, durable, with high quality bearings and seals to give you the best combination of performance, durability and price. Available in a range of 7 colors. This is the new benchmark for no-nonsense hubs Light enough for XC racing but strong enough for eunduro abuse and E-Bikes. The 7075 aluminum hub shell with integrated drive ring is super light and strong. OneUp's simple hub design has fewer parts to reduce weight, increase reliability and makes maintenance a breeze. Spacing: Boost front and rear Holes: 28 and 32 Engagement: 44 points, 8.2 degrees Weight front: 142g Weight rear: 220g Colors: Black, red, dark green, dark blue, orange, purple, silver Material: 7075 T6 Aluminum Freehub options: XDr, Microspline, HG Spokes: J-Bend only End Caps: tool free installation Bearings: Front - MR17287, Rear 6902, Freehub 6802 Enduro silicone freewheel seal Freehubs supplied with Dumonde Pro-x Grease OneUp Front Hub 32H Front Hub UPC: 0628219407313

by OneUp

—$219.99

OneUp Components Hubs Freehub Body Sold Separately Click Freehubs Here These are the hubs we want on our bikes. Lightweight, durable, with high quality bearings and seals to give you the best combination of performance, durability and price. Available in a range of 7 colors. This is the new benchmark for no-nonsense hubs Light enough for XC racing but strong enough for eunduro abuse and E-Bikes. The 7075 aluminum hub shell with integrated drive ring is super light and strong. OneUp's simple hub design has fewer parts to reduce weight, increase reliability and makes maintenance a breeze. Spacing: Boost front and rear Holes: 28 and 32 Engagement: 44 points, 8.2 degrees Weight front: 142g Weight rear: 220g Colors: Black, red, green, blue, orange, purple, grey Material: 7075 T6 Aluminum Freehub options: XDr, Microspline, HG Spokes: J-Bend only End Caps: tool free installation Bearings: Front - MR17287, Rear 6902, Freehub 6802 Enduro silicone freewheel seal Freehubs supplied with Dumonde Pro-x Grease OneUp Rear Hub 28H Rear Hub UPC: 0628219407122

by OneUp

—$219.99

OneUp Components Hubs Freehub Body Sold Separately Click Freehubs Here These are the hubs we want on our bikes. Lightweight, durable, with high quality bearings and seals to give you the best combination of performance, durability and price. Available in a range of 7 colors. This is the new benchmark for no-nonsense hubs Light enough for XC racing but strong enough for eunduro abuse and E-Bikes. The 7075 aluminum hub shell with integrated drive ring is super light and strong. OneUp's simple hub design has fewer parts to reduce weight, increase reliability and makes maintenance a breeze. Spacing: Boost front and rear Holes: 28 and 32 Engagement: 44 points, 8.2 degrees Weight front: 142g Weight rear: 220g Colors: Black, red, green, blue, orange, purple, grey Material: 7075 T6 Aluminum Freehub options: XDr, Microspline, HG Spokes: J-Bend only End Caps: tool free installation Bearings: Front - MR17287, Rear 6902, Freehub 6802 Enduro silicone freewheel seal Freehubs supplied with Dumonde Pro-x Grease OneUp Rear Hub 28H Rear Hub UPC: 0628219407115

by OneUp

—$99.99

OneUp Components Hubs These are the hubs we want on our bikes. Lightweight, durable, with high quality bearings and seals to give you the best combination of performance, durability and price. Available in a range of 7 colors. This is the new benchmark for no-nonsense hubs Light enough for XC racing but strong enough for eunduro abuse and E-Bikes. The 7075 aluminum hub shell with integrated drive ring is super light and strong. OneUp's simple hub design has fewer parts to reduce weight, increase reliability and makes maintenance a breeze. Spacing: Boost front and rear Holes: 28 and 32 Engagement: 44 points, 8.2 degrees Weight front: 142g Weight rear: 220g Colors: Black, red, dark green, dark blue, orange, purple, silver Material: 7075 T6 Aluminum Freehub options: XDr, Microspline, HG Spokes: J-Bend only End Caps: tool free installation Bearings: Front - MR17287, Rear 6902, Freehub 6802 Enduro silicone freewheel seal Freehubs supplied with Dumonde Pro-x Grease OneUp Front Hub 28H Front Hub UPC: 0628219407139

by OneUp

—$99.99

OneUp Components Hubs These are the hubs we want on our bikes. Lightweight, durable, with high quality bearings and seals to give you the best combination of performance, durability and price. Available in a range of 7 colors. This is the new benchmark for no-nonsense hubs Light enough for XC racing but strong enough for eunduro abuse and E-Bikes. The 7075 aluminum hub shell with integrated drive ring is super light and strong. OneUp's simple hub design has fewer parts to reduce weight, increase reliability and makes maintenance a breeze. Spacing: Boost front and rear Holes: 28 and 32 Engagement: 44 points, 8.2 degrees Weight front: 142g Weight rear: 220g Colors: Black, red, dark green, dark blue, orange, purple, silver Material: 7075 T6 Aluminum Freehub options: XDr, Microspline, HG Spokes: J-Bend only End Caps: tool free installation Bearings: Front - MR17287, Rear 6902, Freehub 6802 Enduro silicone freewheel seal Freehubs supplied with Dumonde Pro-x Grease OneUp Front Hub 28H Front Hub UPC: 0628219407146

by OneUp

—$169.95

An elegantly crafted front hub, designed and tested for the rigors of Enduro and Downhill disciplines, and tested over multiple seasons on the World Cup. SL hub is highly weight optimized - All Mountain approved Boost 15 x 110mm only The perfect companion to e*thirteen's revolutionary Sidekick anti-kickback rear hubs Highly CNC weight-optimized aluminum construction J-Bend spoke interface E-Bike compatible Item Specifications Bearing Type Sealed Cartridge Color Black/Sterling Silver Defined Color Black Defined Color Silver Front Axle 15mm Thru x 110mm Hub Drilling 28 Hub/Brake Compatibility 6-Bolt Disc Spoke Interface J-Bend Weight 132 e*thirteen Sidekick Front Hub Front Hub EAN: 4711280345465

by e*thirteen

—$499.95

The Sidekick rear hub features a unique anti-kickback drive mechanism with adjustable deadband, providing smooth suspension performance, reduced fatigue, and near-silent operation for an unparalleled riding experience. Its groundbreaking freehub mechanism disengages the drivetrain from the rear wheel when coasting, and an adjustable deadband filters kickback and chain vibration before it reaches the pedals, virtually eliminating pedal feedback effects on suspension. With the drive mechanism disengaged from the ratchet ring, drag is significantly reduced. The result is an impeccably smooth ride over the roughest terrain, improved traction, heightened speed and control, and reduced fatigue. Its nearly silent operation immerses you in the outdoor experience, letting you hear nothing but the wind in your ears and your tires on the trail. MInidriver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components Designed to enhance the suspension performance of any full-suspension mountain bike Adjustable pawl-pusher allows tool-free tuning of deadband between 12 , 15 , and 18 to suit rider preference, bike type, and terrain Chain tension filtered by the deadband ensures suspension is unhindered by resistance from pedal kick-back, resulting in improved, more consistent performance, and simpler setup Durable 60T ratchet ring with innovative pusher driven pawl system provides silent operation and reduced drag by remaining disengaged unless pedaling Reduced kickback, chainslap, and vibration mean a quieter, more comfortable ride Ultimate reliability: Proven on the World Cup and fully serviceable and rebuildable, so you can push your limits with confidence Highly CNC weight-optimized aluminum construction J-Bend spoke interface E-Bike compatible Item Specifications Bearing Type Cartridge Bearings Cassette Body Type Shimano HG Color Black/Sterling Silver Defined Color Black Defined Color Silver Designed for ebike Yes Hub Drilling 32 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 157mm Spoke Interface J-Bend Weight 467 e*thirteen Sidekick Rear Hub Rear Hub EAN: 4711280345625

by e*thirteen

—$499.95

The Sidekick rear hub features a unique anti-kickback drive mechanism with adjustable deadband, providing smooth suspension performance, reduced fatigue, and near-silent operation for an unparalleled riding experience. Its groundbreaking freehub mechanism disengages the drivetrain from the rear wheel when coasting, and an adjustable deadband filters kickback and chain vibration before it reaches the pedals, virtually eliminating pedal feedback effects on suspension. With the drive mechanism disengaged from the ratchet ring, drag is significantly reduced. The result is an impeccably smooth ride over the roughest terrain, improved traction, heightened speed and control, and reduced fatigue. Its nearly silent operation immerses you in the outdoor experience, letting you hear nothing but the wind in your ears and your tires on the trail. Designed to enhance the suspension performance of any full-suspension mountain bike Adjustable pawl-pusher allows tool-free tuning of deadband between 12 , 15 , and 18 to suit rider preference, bike type, and terrain Chain tension filtered by the deadband ensures suspension is unhindered by resistance from pedal kick-back, resulting in improved, more consistent performance, and simpler setup Durable 60T ratchet ring with innovative pusher driven pawl system provides silent operation and reduced drag by remaining disengaged unless pedaling Reduced kickback, chainslap, and vibration mean a quieter, more comfortable ride Ultimate reliability: Proven on the World Cup and fully serviceable and rebuildable, so you can push your limits with confidence Highly CNC weight-optimized aluminum construction J-Bend spoke interface E-Bike compatible Item Specifications Bearing Type Cartridge Bearings Cassette Body Type SRAM XD Color Black/Sterling Silver Defined Color Black Defined Color Silver Designed for ebike Yes Hub Drilling 28 Hub/Brake Compatibility 6-Bolt Disc Rear Axle 12mm Thru x 148mm Spoke Interface J-Bend Weight 423 e*thirteen Sidekick Rear Hub Rear Hub EAN: 4711280345526

by e*thirteen

—$13.18

Sidi SPD bolts are high-quality cleat hardware designed for use with Sidi cycling shoes. These bolts ensure a secure attachment of SPD cleats, providing reliable performance. Made from robust materials, they offer excellent resistance to wear and corrosion, ensuring long-lasting functionality. Sidi SPD Bolts Pedal Small Part EAN: 8017732017956

by Sidi

—$42.65

Kool-Stop Aero Kool disc brake pads are made with a forged aluminum cooling pinned backing plate and a high performance organic compound. These pads greatly reduce heat build up in the braking system and provide superior, lasting brake power. Fits SRAM/Avid road Does not fit Level Ultimate Includes (1) pair (For one disc brake caliper) and retention spring Pads are specifically designed to greatly reduce heat build up in the braking system and provide superior, lasting brake power Item Specifications Backing Plate Material Aluminum Compound Organic Heat Sink Yes Pad Shape Number 1 Kool-Stop Aero Kool Disc Brake Pads Disc Brake Pad UPC: 760251080946

by Kool-Stop

—$18.70

Kool-Stop disc brake pads designed for use with Avid/SRAM disc brakes. For Avid Code (2010+) Features high performance pad compound Item Specifications Backing Plate Material Steel Compound Organic Pad Shape Number 35 Kool-Stop Avid/SRAM Compatible Disc Brake Pads Disc Brake Pad UPC: 760251075881

by Kool-Stop

—$117.90

The Hope RX Floating Centre-Lock disc brake rotor is a high performance disc, allowing the stainless steel outer to expand separately from the aluminum centre and handle high temperatures without warping. 2-piece floating design allows the laser cut 410 stainless steel outer to expand separately from the CNC machined center to handle high temperatures without warping True floating design allows 1 degree of freedom so outer is always free to expand when subjected to heat CNC machined aluminum center is stiff and lightweight to offer the advantages of a thicker fixed disc without the weight penalty Aluminum center acts as heat sink to keep disc temperatures lower for reliable braking Laser-cut and heat-treated 410 stainless steel braking surface provides increased life and oxidation prevention Machined round outer edge for safety and easier wheel changing 1.8mm thickness (1.5mm minimum) Item Specifications Hub/Disc Compatibility Center-Lock Pad Compatibility All Pad Compounds Rotor Size (mm) 140 Rotor Type Two Piece Hope RX Floating Center-Lock Disc Brake Rotor Disc Rotor EAN: 5056454904000

by Hope

—$77.62

Shimano RT-EM810 disc brake rotors for speed sensor systems deliver powerful and consistent brake performance in all riding conditions. The ICE TECHNOLOGIES FREEZA rotor significantly reduces heat build-up in the brake system to ensure consistent high performance braking even on the steepest downhill stretches. Recommended brake kit: Shimano M9120/M8120/M7120 1.5mm thickness Centerlock mounting system makes installing and removing rotors quick and easy thanks to the spine mount and lock ring design. High heat dissipation by radiator fin Item Specifications Hub/Disc Compatibility Center-Lock keyword search RT-EM810 Pad Compatibility All Pad Compounds Rotor Size (mm) 180 Rotor Type One Piece Weight 140 Shimano RT-EM810 Disc Rotor Disc Rotor UPC: 192790445410

by Shimano

—$42.99

The TRP R2 1.8mm 1-piece 6-bolt stainless steel disc rotor features consistent operating temperatures and built in wear indicators. Designed to give powerful and stable braking in all conditions. Features a clear "Rust Blocker" treatment on arms to help prevent corrosion 1.8mm standard thickness for use with Quadiem, Slate, G-Spec DH, G-Spec Quadiem, G-Spec Slate and select Tektro models High heat dispersion and tolerance Anti-vibrated noise Three individual wear indicators Includes 6 stainless steel bolts Item Specifications Hub/Disc Compatibility 6-Bolt Pad Compatibility All Pad Compounds Rotor Size (mm) 140 Rotor Type One Piece Weight 198 TRP R2 Disc Rotor Disc Rotor EAN: 4717592037388

by TRP

—$94.99

Jagwire LR2-E eBike Disc Brake Rotors feature an integrated magnet for use with E-bike speed sensors. 2.0mm rotor thickness Includes T25 mounting hardware for installation on ISO 6-bolt hubs 2-piece design features an aluminum spider and a separate stainless steel brake track Stainless steel machined braking surface resists corrosion and is tuned to reduce braking noise Aluminum spider features an integrated concentric ring and reinforced rivet joints to resist warping and improve durability For rear wheel use on E-bikes with dropout-mounted speed sensors Compatible with all popular disc brake pad compounds (organic/resin, metallic, and semi-metallic) NOTE: LR2-E rotors are NOT compatible with brakes with pads that extend below the caliper body. Examples include Avid BB7, Avid Juicy, Hayes HFX, and Hayes MX1 Item Specifications Hub/Disc Compatibility 6-Bolt Pad Compatibility All Pad Compounds Rotor Size (mm) 220 Rotor Type Two Piece Weight 209 Jagwire Pro LR2-E Ebike Disc Brake Rotor Disc Rotor EAN: 4715910042595

by Jagwire

—$27.99

These disc brake pads fit a variety of Shimano brakes and offer industry-leading brake compounds for consistent, confident performance. Jagwire Pro E-Bike pads feature a friction compound developed specifically for the unique needs of pedal-assist E-bikes Tuned to provide more stopping power and durability than typical pads, with consistent modulation and little braking noise Steel backing plate Compatible with Shimano XTR M9100; Dura Ace R9270, R9170; Ultegra R8170, R8070; 105 R7070; Tiagra 4770; GRX RX810, RX400; Road/CX RS805, RS505, RS405, RS305; Metrea U5000 Compatible with Rever Attack-S Flat-Mount, Attack-U Flat-Mount, MCX1 Flat-Mount, MCX2 Flat-Mount Compatible with TRP Hylex Flat-Mount, Hylex RS Flat-Mount, HD-T910/912 / Tektro HD-R310, HD-R510 Item Specifications Backing Plate Material Steel Compound Semi-Metallic Designed for ebike Yes Pad Shape Number 59 Jagwire Shimano Compatible Disc Brake Pads Disc Brake Pad EAN: 4715910042656

by Jagwire