Components

—$55

200 Hour Service Kit for the repair and maintenance of RockShox forks. Performing yearly maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. RockShox recommended 200hr/1 Year service kit for Reba RL/Gold (2026+) generation-B suspension forks Compatible with RockShox model: FS-REBA-GLD-B1 RockShox 200 Hour Fork Service Kit Service Kit UPC: 710845923906

by RockShox

—$90

Isolator's shim-based, spring-backed Internal Floating Piston (IFP) is designed to give riders a consistent and predictable feel throughout travel. Isolator offers a three-position Compression damping adjustment: a plush Open to absorb big impacts, a supportive Pedal without harshness on successive hits, and a watt-saving Firm for the maximum damping force to calm bobbing for the most efficient ride. Includes full right-side internals and controls Compatible Reba RL B1 (2026+) 3-Position remote type (Remote sold separately) For use with RockShox model: FS-REBA-GLD-B1 RockShox Isolator RL Damper Upgrade Kit Damper, Compression UPC: 710845923722

by RockShox

—$55

RockShox Motion Control Compression DampersCompatible with RockShox model: FS-REBA-GLD-B1 RockShox Motion Control Compression Damper Damper, Compression UPC: 710845923753

by RockShox

—$65

RockShox Motion Control For Remote Compression Dampers For use with 10mm cable pull remote (remote sold separately) Compatible with RockShox model: FS-REBA-GLD-B1 RockShox Motion Control Compression Damper for Remote Damper, Compression UPC: 710845923760

by RockShox

—$90

Isolator's shim-based, spring-backed Internal Floating Piston (IFP) is designed to give riders a consistent and predictable feel throughout travel. Isolator offers a three-position Compression damping adjustment: a plush Open to absorb big impacts, a supportive Pedal without harshness on successive hits, and a watt-saving Firm for the maximum damping force to calm bobbing for the most efficient ride. Includes full right-side internals and controls Compatible Reba RL B1 (2026+) 3-Position crown type For use with RockShox model: FS-REBA-GLD-B1 RockShox Isolator RL Damper Upgrade Kit Damper, Compression UPC: 710845923715

by RockShox

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$2,250

The Push Industries Nine One Fork is a special order item. When checking out, please leave a note with the following: Rider weight w/ gear Riding style Any additional comments The Push Industries Nine One V2 Fork is a premium inverted, coil-sprung suspension fork built for riders who want unbeatable traction, control, and consistency on demanding trail, enduro, and e-MTB terrain. Hand-assembled in Colorado, it combines a stout upper structure with a floating axle and refined damper to deliver a uniquely planted, confidence-inspiring front end. At its core is a true coil spring backed by a dedicated hydraulic bottom-out circuit and Push’s Sub Chamber system. The coil delivers friction-free small-bump sensitivity, while the Sub Chamber lets you add mid-stroke support on the fly without sacrificing initial suppleness. When the hits get big, the decoupled hydraulic bottom-out ramps up smoothly in the last portion of travel, keeping you off the stops and in control. Internally adjustable travel from 140–170mm means one fork can cover multiple bikes and setups, while modular axle lugs simplify switching wheel sizes or offsets. Whether you’re upgrading a favorite rig or building a new long-travel machine from scratch, the Nine One V2 delivers the sensitivity, composure, and tunability you expect from top-tier suspension. FEATURES Inverted coil-sprung chassis with 44mm uppers and 36mm stanchions 140–170mm travel, internally adjustable in 10mm increments Sub Chamber switch for on-the-fly mid-stroke support adjustment Decoupled hydraulic bottom-out for controlled end-stroke ramp-up External high- and low-speed compression plus rebound adjustments Floating 15×110mm Boost axle; standard and Torque Cap hub compatible Modular axle lugs for 27.5" or 29" wheels and 37/44mm offsets Oil-bathed bushings and low-friction seals for smooth small-bump response 180–203mm direct brake mount; 220–223mm rotors with adapter Approx. 2,800g with full steerer, axle, guards, and hose guide PUSH Industries Nine One V2 Suspension Fork

by PUSH Industries

—$381

The Arch MK4 LTD wheels combine Stan's flagship MK4 rim design with the robust E-Sync hub. For a limited time, the MK4 LTD is a performance wheelset at an incredible price point! Laced with premium Sapim Race spokes and brass nipples laced to the extra-durable E-sync hub. Featuring chromoly steel axles and double row Enduro bearings, special heat treated steel ratchet rings, and a pawl design that reduces stress on freehub and bearings, making it the perfect choice for traditional and e-bike use. 32 Spokes 28mm rim width optimized for Trail and XC tires up to 2.5 Light and durable 6069 aluminum with welded joint and reinforced spoke bed BST Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel build E-sync hubs offer fast 8.18 engagement with reinforced pawls Enduro bearings with double-row freehub bearing and chromoly axle offer 47% increase in max torque capacity over Neo hubs Includes Tubeless Tape and Valve 3-year rim warranty with 1-year crash replacement Item Specifications Cassette Body Type Shimano HG Color Black Defined Color Black Designed for ebike Yes Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 142mm Rim Material Alloy Rim Width (Internal) 28 Tire Type Tubeless Ready Valve Presta Wheel Size 29" Stan's No Tubes Arch MK4 LTD Rear Wheel Rear Wheel UPC: 708752545403

by Stan's No Tubes

—$47.99

Designed for riders who prioritize minimal padding and maximum responsiveness, the 1.9mm DSP Ultra tape offers a sleek, low-profile feel. Ideal for road cyclists seeking direct bar feedback, this version features the updated polymer blend and refined texture for enhanced grip and durability. Lightweight and easy to install with premium adhesive backing, it's a top choice for performance-focused setups. Premium 3M adhesive for secure, hassle-free installation Next-generation polymer enhances performance and responsiveness Improved formulation boosts long-term durability and tactile feel Updated texture increases surface area for better grip Package includes: 2 rolls, 2 screw-in plugs, 2 clamp covers, 2 finish strips Item Specifications Adhesive No Color Jet Black Defined Color Black Length 216cm Material DuraSoft Polymer Thickness 1.9 Weight 77 Lizard Skins DSP Ultra 1.9mm Bar Tape Bar Tape UPC: 696260023028

by Lizard Skins

—$54.99

The Terreno T10 Hardpack Gravel Endurance tire is the most road-efficient model in the Vittoria Gravel Endurance range, engineered for speed and control on compact surfaces. The heart of the T10 is Vittoria's Endurance Formulation powered by Graphene, delivering proven durability, weather resistance, and consistent performance across seasons and surfaces. A Corsa-inspired and fast rolling slick center strip is paired with revolutionary fish scale shoulders, adapted from the Terreno T30, for added cornering grip and navigating wet or variable terrain. Built with Endurance Casing, the T10 offers high adaptability and structural strength for long-distance riding, reinforced with a nylon sidewall protection layer and an anti-puncture belt to ensure maximum reliability and peace of mind. Nylon Sport Casing Approved for use with hookless rims Designed for riders who prioritize speed on fine gravel yet demand dependable handling and versatility when conditions become more technical. Ideal for riders who spend most of their time on pavement or hardpacked gravel but want a tire that can handle occasional detours with confidence Made for maximum efficiency on firm terrain, the T10 rolls effortlessly while maintaining essential grip for real-world gravel riding making it the go-to choice for events with mixed sections or fast endurance rides Endurance Casing + Sidewall Protection offers high adaptability and strength, combined with reinforced nylon sidewall protection for increased puncture resistance and stability Endurance Formulation Compound with Graphene provides dependability, durability, and performance, made for the long haul, no matter the weather Anti-Puncture Belt Casing adds extra puncture resistance Foldable Kevlar aramid bead with added Bead Shield provides extra reinforced protection throughout the bead Item Specifications Color Black Defined Color Black Flat Protection Tread ISO Diameter 622 / Road / 29" ISO Width (mm) 37 Labeled Size 700 x 35 Tire Bead Folding Tire Diameter 700c Tire Intended Use Cyclocross Tire Intended Use Gravel Tire Type Clincher Weight 710 Vittoria Terreno T10 Hardpack Tires EAN: 8022530039468

by Vittoria

—$54.99

The Terreno T30 Fine Loose Gravel Endurance tire strikes the perfect balance between speed and control on fast-rolling gravel. The T30 features a unique fish scale center strip and is optimized for low rolling resistance while maintaining braking traction and stability in demanding conditions. The siped shoulder knobs are engineered to dig into off-camber sections, offering enhanced grip when cornering, while a gradual ramp-up tread design ensures a smooth, confident transition as you lean into turns. All made from the Endurance Formulation powered by Graphene. Nylon Sport Casing Approved for use with hookless rims Built for fast gravel, offering a race-ready feel with the confidence to handle off-camber turns, tricky corners in the wet or dry, and shifting surfaces without hesitation Designed for riders who prioritize speed on fine gravel yet demand dependable handling and versatility when conditions become more technical Endurance Casing + Sidewall Protection offers high adaptability and strength, combined with reinforced nylon sidewall protection for increased puncture resistance and stability Endurance Formulation Compound with Graphene provides dependability, durability, and performance, made for the long haul, no matter the weather Anti-Puncture Belt Casing adds extra puncture resistance Foldable Kevlar aramid bead with added Bead Shield provides extra reinforced protection throughout the bead Item Specifications Color Black Defined Color Black Flat Protection Tread ISO Diameter 622 / Road / 29" ISO Width (mm) 37 Labeled Size 700 x 35 Tire Bead Folding Tire Diameter 700c Tire Intended Use Cyclocross Tire Intended Use Gravel Tire Type Clincher Weight 720 Vittoria Terreno T30 Fine Loose Tires EAN: 8022530039697

by Vittoria

—$50

Say goodbye to the hassle of traditional tubeless valves that clog up and require valve cores to be removed to fill sealant with sufficient air flow during set up. Big Bore Valves are engineered with precision and designed to deliver maximum air inflation simply and efficiently. Crafted from 7075 aircraft grade CNC machined aluminum construction with a stainless-steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions. This patent-pending design sets a new standard in high air flow tubeless tire systems with a revolutionary 'Straight through' internal design for maximum airflow fire power, allowing higher air volume per pump, reduced sealant clogging and easier tubeless setup. Big Bore Lite valves feature a standard Presta valve head design, while offering up to 230% higher air flow than traditional Presta valves Coreless, ball valve construction and integrated lever allows you to quickly open and close the valve for effortless airflow control, and even fine tune your pressure along the ride Stainless steel ball valve with seals and O-rings Serviceable design with spanner flats on the head, lever and body 4-way tire insert air flow base is compatible with most tubeless inserts 4mm machined hex key slot for easy installation and removal Supplied with various rubber bases to optimize fit and seal with multiple rim types Muc-Off Big Bore Lite Tubeless Valve Stems Tubeless Valves EAN: 5037835219890

by Muc-Off

—$50

Say goodbye to the hassle of traditional tubeless valves that clog up and require valve cores to be removed to fill sealant with sufficient air flow during set up. Big Bore Valves are engineered with precision and designed to deliver maximum air inflation simply and efficiently. Crafted from 7075 aircraft grade CNC machined aluminum construction with a stainless-steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions. This patent-pending design sets a new standard in high air flow tubeless tire systems with a revolutionary 'Straight through' internal design for maximum airflow fire power, allowing higher air volume per pump, reduced sealant clogging and easier tubeless setup. Big Bore Lite valves feature a standard Presta valve head design, while offering up to 230% higher air flow than traditional Presta valves Coreless, ball valve construction and integrated lever allows you to quickly open and close the valve for effortless airflow control, and even fine tune your pressure along the ride Stainless steel ball valve with seals and O-rings Serviceable design with spanner flats on the head, lever and body 4-way tire insert air flow base is compatible with most tubeless inserts 4mm machined hex key slot for easy installation and removal Supplied with various rubber bases to optimize fit and seal with multiple rim types Muc-Off Big Bore Lite Tubeless Valve Stems Tubeless Valves EAN: 5037835220223

by Muc-Off

—$50

Say goodbye to the hassle of traditional tubeless valves that clog up and require valve cores to be removed to fill sealant with sufficient air flow during set up. Big Bore Valves are engineered with precision and designed to deliver maximum air inflation simply and efficiently. Crafted from 7075 aircraft grade CNC machined aluminum construction with a stainless-steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions. This patent-pending design sets a new standard in high air flow tubeless tire systems with a revolutionary 'Straight through' internal design for maximum airflow fire power, allowing higher air volume per pump, reduced sealant clogging and easier tubeless setup. Big Bore Lite valves feature a standard Presta valve head design, while offering up to 230% higher air flow than traditional Presta valves Coreless, ball valve construction and integrated lever allows you to quickly open and close the valve for effortless airflow control, and even fine tune your pressure along the ride Stainless steel ball valve with seals and O-rings Serviceable design with spanner flats on the head, lever and body 4-way tire insert air flow base is compatible with most tubeless inserts 4mm machined hex key slot for easy installation and removal Supplied with various rubber bases to optimize fit and seal with multiple rim types Muc-Off Big Bore Lite Tubeless Valve Stems Tubeless Valves EAN: 5037835220230

by Muc-Off

—$50

Say goodbye to the hassle of traditional tubeless valves that clog up and require valve cores to be removed to fill sealant with sufficient air flow during set up. Big Bore Valves are engineered with precision and designed to deliver maximum air inflation simply and efficiently. Crafted from 7075 aircraft grade CNC machined aluminum construction with a stainless-steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions. This patent-pending design sets a new standard in high air flow tubeless tire systems with a revolutionary 'Straight through' internal design for maximum airflow fire power, allowing higher air volume per pump, reduced sealant clogging and easier tubeless setup. Big Bore Hybrid valves feature a universal, Schrader style valve head that s compatible with most screw on and push fit pumps, while offering up to 245% higher air flow than traditional Presta valves Coreless, ball valve construction and integrated lever allows you to quickly open and close the valve for effortless airflow control, and even fine tune your pressure along the ride Stainless steel ball valve with seals and O-rings Serviceable design with spanner flats on the head, lever and body 4-way tire insert air flow base is compatible with most tubeless inserts 4mm machined hex key slot for easy installation and removal Supplied with various rubber bases to optimize fit and seal with multiple rim types Hybrid valves include rubber tubing adapter for Muc-Off sealant pouches Muc-Off Big Bore Hybrid Tubeless Valve Stems Tubeless Valves EAN: 5037835219920

by Muc-Off

—$50

Say goodbye to the hassle of traditional tubeless valves that clog up and require valve cores to be removed to fill sealant with sufficient air flow during set up. Big Bore Valves are engineered with precision and designed to deliver maximum air inflation simply and efficiently. Crafted from 7075 aircraft grade CNC machined aluminum construction with a stainless-steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions. This patent-pending design sets a new standard in high air flow tubeless tire systems with a revolutionary 'Straight through' internal design for maximum airflow fire power, allowing higher air volume per pump, reduced sealant clogging and easier tubeless setup. Big Bore Hybrid valves feature a universal, Schrader style valve head that s compatible with most screw on and push fit pumps, while offering up to 245% higher air flow than traditional Presta valves Coreless, ball valve construction and integrated lever allows you to quickly open and close the valve for effortless airflow control, and even fine tune your pressure along the ride Stainless steel ball valve with seals and O-rings Serviceable design with spanner flats on the head, lever and body 4-way tire insert air flow base is compatible with most tubeless inserts 4mm machined hex key slot for easy installation and removal Supplied with various rubber bases to optimize fit and seal with multiple rim types Hybrid valves include rubber tubing adapter for Muc-Off sealant pouches Muc-Off Big Bore Hybrid Tubeless Valve Stems Tubeless Valves EAN: 5037835219913

by Muc-Off

—$50

Say goodbye to the hassle of traditional tubeless valves that clog up and require valve cores to be removed to fill sealant with sufficient air flow during set up. Big Bore Valves are engineered with precision and designed to deliver maximum air inflation simply and efficiently. Crafted from 7075 aircraft grade CNC machined aluminum construction with a stainless-steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions. This patent-pending design sets a new standard in high air flow tubeless tire systems with a revolutionary 'Straight through' internal design for maximum airflow fire power, allowing higher air volume per pump, reduced sealant clogging and easier tubeless setup. Big Bore Hybrid valves feature a universal, Schrader style valve head that s compatible with most screw on and push fit pumps, while offering up to 245% higher air flow than traditional Presta valves Coreless, ball valve construction and integrated lever allows you to quickly open and close the valve for effortless airflow control, and even fine tune your pressure along the ride Stainless steel ball valve with seals and O-rings Serviceable design with spanner flats on the head, lever and body 4-way tire insert air flow base is compatible with most tubeless inserts 4mm machined hex key slot for easy installation and removal Supplied with various rubber bases to optimize fit and seal with multiple rim types Hybrid valves include rubber tubing adapter for Muc-Off sealant pouches Muc-Off Big Bore Hybrid Tubeless Valve Stems Tubeless Valves EAN: 5037835219937

by Muc-Off

—$50

Say goodbye to the hassle of traditional tubeless valves that clog up and require valve cores to be removed to fill sealant with sufficient air flow during set up. Big Bore Valves are engineered with precision and designed to deliver maximum air inflation simply and efficiently. Crafted from 7075 aircraft grade CNC machined aluminum construction with a stainless-steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions. This patent-pending design sets a new standard in high air flow tubeless tire systems with a revolutionary 'Straight through' internal design for maximum airflow fire power, allowing higher air volume per pump, reduced sealant clogging and easier tubeless setup. Big Bore Hybrid valves feature a universal, Schrader style valve head that s compatible with most screw on and push fit pumps, while offering up to 245% higher air flow than traditional Presta valves Coreless, ball valve construction and integrated lever allows you to quickly open and close the valve for effortless airflow control, and even fine tune your pressure along the ride Stainless steel ball valve with seals and O-rings Serviceable design with spanner flats on the head, lever and body 4-way tire insert air flow base is compatible with most tubeless inserts 4mm machined hex key slot for easy installation and removal Supplied with various rubber bases to optimize fit and seal with multiple rim types Hybrid valves include rubber tubing adapter for Muc-Off sealant pouches Muc-Off Big Bore Hybrid Tubeless Valve Stems Tubeless Valves EAN: 5037835219951

by Muc-Off

—$50

Say goodbye to the hassle of traditional tubeless valves that clog up and require valve cores to be removed to fill sealant with sufficient air flow during set up. Big Bore Valves are engineered with precision and designed to deliver maximum air inflation simply and efficiently. Crafted from 7075 aircraft grade CNC machined aluminum construction with a stainless-steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions. This patent-pending design sets a new standard in high air flow tubeless tire systems with a revolutionary 'Straight through' internal design for maximum airflow fire power, allowing higher air volume per pump, reduced sealant clogging and easier tubeless setup. Big Bore Hybrid valves feature a universal, Schrader style valve head that s compatible with most screw on and push fit pumps, while offering up to 245% higher air flow than traditional Presta valves Coreless, ball valve construction and integrated lever allows you to quickly open and close the valve for effortless airflow control, and even fine tune your pressure along the ride Stainless steel ball valve with seals and O-rings Serviceable design with spanner flats on the head, lever and body 4-way tire insert air flow base is compatible with most tubeless inserts 4mm machined hex key slot for easy installation and removal Supplied with various rubber bases to optimize fit and seal with multiple rim types Hybrid valves include rubber tubing adapter for Muc-Off sealant pouches Muc-Off Big Bore Hybrid Tubeless Valve Stems Tubeless Valves EAN: 5037835219944

by Muc-Off

—$50

Say goodbye to the hassle of traditional tubeless valves that clog up and require valve cores to be removed to fill sealant with sufficient air flow during set up. Big Bore Valves are engineered with precision and designed to deliver maximum air inflation simply and efficiently. Crafted from 7075 aircraft grade CNC machined aluminum construction with a stainless-steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions. This patent-pending design sets a new standard in high air flow tubeless tire systems with a revolutionary 'Straight through' internal design for maximum airflow fire power, allowing higher air volume per pump, reduced sealant clogging and easier tubeless setup. Big Bore Hybrid valves feature a universal, Schrader style valve head that s compatible with most screw on and push fit pumps, while offering up to 245% higher air flow than traditional Presta valves Coreless, ball valve construction and integrated lever allows you to quickly open and close the valve for effortless airflow control, and even fine tune your pressure along the ride Stainless steel ball valve with seals and O-rings Serviceable design with spanner flats on the head, lever and body 4-way tire insert air flow base is compatible with most tubeless inserts 4mm machined hex key slot for easy installation and removal Supplied with various rubber bases to optimize fit and seal with multiple rim types Hybrid valves include rubber tubing adapter for Muc-Off sealant pouches Muc-Off Big Bore Hybrid Tubeless Valve Stems Tubeless Valves EAN: 5037835220179

by Muc-Off

—$50

Say goodbye to the hassle of traditional tubeless valves that clog up and require valve cores to be removed to fill sealant with sufficient air flow during set up. Big Bore Valves are engineered with precision and designed to deliver maximum air inflation simply and efficiently. Crafted from 7075 aircraft grade CNC machined aluminum construction with a stainless-steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions. This patent-pending design sets a new standard in high air flow tubeless tire systems with a revolutionary 'Straight through' internal design for maximum airflow fire power, allowing higher air volume per pump, reduced sealant clogging and easier tubeless setup. Big Bore Hybrid valves feature a universal, Schrader style valve head that s compatible with most screw on and push fit pumps, while offering up to 245% higher air flow than traditional Presta valves Coreless, ball valve construction and integrated lever allows you to quickly open and close the valve for effortless airflow control, and even fine tune your pressure along the ride Stainless steel ball valve with seals and O-rings Serviceable design with spanner flats on the head, lever and body 4-way tire insert air flow base is compatible with most tubeless inserts 4mm machined hex key slot for easy installation and removal Supplied with various rubber bases to optimize fit and seal with multiple rim types Hybrid valves include rubber tubing adapter for Muc-Off sealant pouches Muc-Off Big Bore Hybrid Tubeless Valve Stems Tubeless Valves EAN: 5037835220193

by Muc-Off

—$50

Say goodbye to the hassle of traditional tubeless valves that clog up and require valve cores to be removed to fill sealant with sufficient air flow during set up. Big Bore Valves are engineered with precision and designed to deliver maximum air inflation simply and efficiently. Crafted from 7075 aircraft grade CNC machined aluminum construction with a stainless-steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions. This patent-pending design sets a new standard in high air flow tubeless tire systems with a revolutionary 'Straight through' internal design for maximum airflow fire power, allowing higher air volume per pump, reduced sealant clogging and easier tubeless setup. Big Bore Hybrid valves feature a universal, Schrader style valve head that s compatible with most screw on and push fit pumps, while offering up to 245% higher air flow than traditional Presta valves Coreless, ball valve construction and integrated lever allows you to quickly open and close the valve for effortless airflow control, and even fine tune your pressure along the ride Stainless steel ball valve with seals and O-rings Serviceable design with spanner flats on the head, lever and body 4-way tire insert air flow base is compatible with most tubeless inserts 4mm machined hex key slot for easy installation and removal Supplied with various rubber bases to optimize fit and seal with multiple rim types Hybrid valves include rubber tubing adapter for Muc-Off sealant pouches Muc-Off Big Bore Hybrid Tubeless Valve Stems Tubeless Valves EAN: 5037835220285

by Muc-Off

—$50

Say goodbye to the hassle of traditional tubeless valves that clog up and require valve cores to be removed to fill sealant with sufficient air flow during set up. Big Bore Valves are engineered with precision and designed to deliver maximum air inflation simply and efficiently. Crafted from 7075 aircraft grade CNC machined aluminum construction with a stainless-steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions. This patent-pending design sets a new standard in high air flow tubeless tire systems with a revolutionary 'Straight through' internal design for maximum airflow fire power, allowing higher air volume per pump, reduced sealant clogging and easier tubeless setup. Big Bore Hybrid valves feature a universal, Schrader style valve head that s compatible with most screw on and push fit pumps, while offering up to 245% higher air flow than traditional Presta valves Coreless, ball valve construction and integrated lever allows you to quickly open and close the valve for effortless airflow control, and even fine tune your pressure along the ride Stainless steel ball valve with seals and O-rings Serviceable design with spanner flats on the head, lever and body 4-way tire insert air flow base is compatible with most tubeless inserts 4mm machined hex key slot for easy installation and removal Supplied with various rubber bases to optimize fit and seal with multiple rim types Hybrid valves include rubber tubing adapter for Muc-Off sealant pouches Muc-Off Big Bore Hybrid Tubeless Valve Stems Tubeless Valves EAN: 5037835220278

by Muc-Off

—$50

Say goodbye to the hassle of traditional tubeless valves that clog up and require valve cores to be removed to fill sealant with sufficient air flow during set up. Big Bore Valves are engineered with precision and designed to deliver maximum air inflation simply and efficiently. Crafted from 7075 aircraft grade CNC machined aluminum construction with a stainless-steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions. This patent-pending design sets a new standard in high air flow tubeless tire systems with a revolutionary 'Straight through' internal design for maximum airflow fire power, allowing higher air volume per pump, reduced sealant clogging and easier tubeless setup. Big Bore Hybrid valves feature a universal, Schrader style valve head that s compatible with most screw on and push fit pumps, while offering up to 245% higher air flow than traditional Presta valves Coreless, ball valve construction and integrated lever allows you to quickly open and close the valve for effortless airflow control, and even fine tune your pressure along the ride Stainless steel ball valve with seals and O-rings Serviceable design with spanner flats on the head, lever and body 4-way tire insert air flow base is compatible with most tubeless inserts 4mm machined hex key slot for easy installation and removal Supplied with various rubber bases to optimize fit and seal with multiple rim types Hybrid valves include rubber tubing adapter for Muc-Off sealant pouches Muc-Off Big Bore Hybrid Tubeless Valve Stems Tubeless Valves EAN: 5037835220292

by Muc-Off

—$50

Say goodbye to the hassle of traditional tubeless valves that clog up and require valve cores to be removed to fill sealant with sufficient air flow during set up. Big Bore Valves are engineered with precision and designed to deliver maximum air inflation simply and efficiently. Crafted from 7075 aircraft grade CNC machined aluminum construction with a stainless-steel ball valve, this fully serviceable valve is built to withstand the toughest rides, whatever the conditions. This patent-pending design sets a new standard in high air flow tubeless tire systems with a revolutionary 'Straight through' internal design for maximum airflow fire power, allowing higher air volume per pump, reduced sealant clogging and easier tubeless setup. Big Bore Hybrid valves feature a universal, Schrader style valve head that s compatible with most screw on and push fit pumps, while offering up to 245% higher air flow than traditional Presta valves Coreless, ball valve construction and integrated lever allows you to quickly open and close the valve for effortless airflow control, and even fine tune your pressure along the ride Stainless steel ball valve with seals and O-rings Serviceable design with spanner flats on the head, lever and body 4-way tire insert air flow base is compatible with most tubeless inserts 4mm machined hex key slot for easy installation and removal Supplied with various rubber bases to optimize fit and seal with multiple rim types Hybrid valves include rubber tubing adapter for Muc-Off sealant pouches Muc-Off Big Bore Hybrid Tubeless Valve Stems Tubeless Valves EAN: 5037835220315

by Muc-Off

—$381

The Arch MK4 LTD wheels combine Stan's flagship MK4 rim design with the robust E-Sync hub. For a limited time, the MK4 LTD is a performance wheelset at an incredible price point! Laced with premium Sapim Race spokes and brass nipples laced to the extra-durable E-sync hub. Featuring chromoly steel axles and double row Enduro bearings, special heat treated steel ratchet rings, and a pawl design that reduces stress on freehub and bearings, making it the perfect choice for traditional and e-bike use. 32 Spokes 28mm rim width optimized for Trail and XC tires up to 2.5 Light and durable 6069 aluminum with welded joint and reinforced spoke bed BST Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel build E-sync hubs offer fast 8.18 engagement with reinforced pawls Enduro bearings with double-row freehub bearing and chromoly axle offer 47% increase in max torque capacity over Neo hubs Includes Tubeless Tape and Valve 3-year rim warranty with 1-year crash replacement Item Specifications Cassette Body Type Shimano HG Color Black Defined Color Black Designed for ebike Yes Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 142mm Rim Material Alloy Rim Width (Internal) 28 Tire Type Tubeless Ready Valve Presta Wheel Size 29" Stan's No Tubes Arch MK4 LTD Rear Wheel Rear Wheel UPC: 708752545366

by Stan's No Tubes

—$381

The Flow MK4 LTD wheels combine Stan's flagship MK4 rim design with the robust E-Sync hub. For a limited time, the MK4 LTD is a performance wheelset at an incredible price point! Laced with premium Sapim Race spokes and brass nipples laced to the extra-durable E-sync hub. Featuring chromoly steel axles and double row Enduro bearings, special heat treated steel ratchet rings, and a pawl design that reduces stress on freehub and bearings, making it the perfect choice for traditional and e-bike use. 32 Spokes Low-profile 30mm internal width opitimizes tire shape, traction , and control for 2.3-2.6" tires Light and durable 6069 aluminum with welded joint and reinforced spoke bed BST Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel build E-sync hubs offer fast 8.18 engagement with reinforced pawls Enduro bearings with double-row freehub bearing and chromoly axle offer 47% increase in max torque capacity over Neo hubs Includes Tubeless Tape and Valve 3-year rim warranty with 1-year crash replacement Item Specifications Cassette Body Type SRAM XDR Color Black Defined Color Black Designed for ebike Yes Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 148mm Rim Material Alloy Rim Width (Internal) 30 Tire Type Tubeless Ready Valve Presta Wheel Size 29" Stan's No Tubes Flow MK4 LTD Rear Wheel Rear Wheel UPC: 708752545502

by Stan's No Tubes

—$381

The Arch MK4 LTD wheels combine Stan's flagship MK4 rim design with the robust E-Sync hub. For a limited time, the MK4 LTD is a performance wheelset at an incredible price point! Laced with premium Sapim Race spokes and brass nipples laced to the extra-durable E-sync hub. Featuring chromoly steel axles and double row Enduro bearings, special heat treated steel ratchet rings, and a pawl design that reduces stress on freehub and bearings, making it the perfect choice for traditional and e-bike use. 32 Spokes 28mm rim width optimized for Trail and XC tires up to 2.5 Light and durable 6069 aluminum with welded joint and reinforced spoke bed BST Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel build E-sync hubs offer fast 8.18 engagement with reinforced pawls Enduro bearings with double-row freehub bearing and chromoly axle offer 47% increase in max torque capacity over Neo hubs Includes Tubeless Tape and Valve 3-year rim warranty with 1-year crash replacement Item Specifications Cassette Body Type Shimano Micro Spline Color Black Defined Color Black Designed for ebike Yes Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 148mm Rim Material Alloy Rim Width (Internal) 28 Tire Type Tubeless Ready Valve Presta Wheel Size 29" Stan's No Tubes Arch MK4 LTD Rear Wheel Rear Wheel UPC: 708752545441

by Stan's No Tubes

—$2,599

Reserve Infinity Disc wheels are your weapon of choice against the clock and the wind. Blending uncompromising aerodynamics to provide stability combined with speed, the Infinity Disc was raced by Team Visma's Wout van Aert to Olympic Silver at the Paris Games. With an updated internal profile to accommodate wider tires and optimize airflow, the shaped carbon surface creates a powerful "sail effect" at key yaw angles, turning crosswinds into forward momentum. When every watt counts and every second matters, trust the proven speed and absolute confidence of the Infinity Disc. The Infinity Disc is designed with Turbulent Aero technology, which provides the perfect balance between stability and aerodynamics, reducing reaction to cross winds, while also minimizing drag Designed to be tested at the highest levels of competition in Time Trials, Triathons or Track Racing, the Reserve Infinity Disc wheels are pivotal in delivering the best athletes in the world the advantage they need Full carbon construction, Tubeless Ready Clincher rim with wider profile to accommodate and maximize tire widths 28-35mm Bonded-in hubs to ensure maximum strength and stiffness Rear wheel includes both the XDR and HG-EV driver bodies Item Specifications Color Carbon Defined Color Black Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 142mm Rim Material Carbon Rim Width (Internal) 24.5 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 700c Reserve Wheels Reserve Infinity Disc Rear Wheel Rear Wheel UPC: 192219494043

by Reserve Wheels

—$2,499

Building on the award-winning 52/63, the Reserve 57/64 TA is over 8% faster in wind tunnel testing, without adding a single gram of rim weight. Designed with Reserve's latest Turbulent Aero refinements, it's the ultimate wheelset for breakaways, sprints, and all-out speed. The 57mm front ensures confident handling in crosswinds, while the 64mm rear delivers relentless aero gains. Updated with sleek new graphics, it's fast-redefined. Built with DT Swiss Hubs Engineered for pure speed when every second counts, these wheels deliver pro-level performance whether you're racing for the podium or chasing personal bests on your home roads CFD (Computational Fluid Dynamics) provides testing data that is focused on simulating real-world air flow, allowing for Reserve to continuously build upon their Turbulent Aero technology Precise carbon layups and proprietary testing to maximize strength, stiffness, and durability Tubeless Ready Clincher rim accmodates tire widths 29-40mm Item Specifications Cassette Body Type Shimano HG 11/12-Speed Road Cassette Body Type SRAM XDR Color Carbon Defined Color Black Front Axle 12mm Thru x 100mm Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 142mm Rim Material Carbon Rim Width (Internal) 24.4 Rim Width (Internal) 25.4 Tire Type Tubeless Ready Valve Presta Wheel Size 700c Reserve Wheels Reserve 57/64 Turbulent Aero Wheelset Wheelset UPC: 192219495446

by Reserve Wheels

—$2,199

Whether you are planning to leave it all out there on Queen Ka'ahumanu Highway or just strutting your stuff at a local time trial, the Reserve 77/88 not only looks the part but delivers the speed. Developed using Turbulent Aero technology, the mixed profile front and rear setup of the 77|88 provides for maximum stability, lowest weight and optimized aerodynamics. Built with DT Swiss Hubs The 77/88 marks a milestone in the evolution of road wheel aerodynamics, where real world data and Turbulent Aero technology is used to design the fastest, most stable wheelset for real riders in real world conditions The mixed profile front and rear setup of the 77/88 provides for maximum stability, lowest weight and optimized aerodynamics. The rear wheel is asymmetrical, which creates a stronger, stiffer and more durable wheel Reserve has traveled the US, mapping different types of wind conditions, and then used this data to replicate real world conditions in the wind tunnel. All this work culminated in the creation of the first wheelset designed with Turbulent Aero technology Tubeless Ready Clincher rim accmodates tire widths 25-30mm Item Specifications Cassette Body Type Shimano HG 11/12-Speed Road Color Carbon Defined Color Black Front Axle 12mm Thru x 100mm Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 142mm Rim Material Carbon Rim Width (Internal) 24 Rim Width (Internal) 25 Tire Type Tubeless Ready Valve Presta Wheel Size 700c Reserve Wheels Reserve 77/88 Turbulent Aero Wheelset Wheelset UPC: 192219464374

by Reserve Wheels

—$2,299

Reserve Infinity Disc wheels are your weapon of choice against the clock and the wind. Blending uncompromising aerodynamics to provide stability combined with speed, the Infinity Disc was raced by Team Visma's Wout van Aert to Olympic Silver at the Paris Games. With an updated internal profile to accommodate wider tires and optimize airflow, the shaped carbon surface creates a powerful "sail effect" at key yaw angles, turning crosswinds into forward momentum. When every watt counts and every second matters, trust the proven speed and absolute confidence of the Infinity Disc. The Infinity Disc is designed with Turbulent Aero technology, which provides the perfect balance between stability and aerodynamics, reducing reaction to cross winds, while also minimizing drag Designed to be tested at the highest levels of competition in Time Trials, Triathons or Track Racing, the Reserve Infinity Disc wheels are pivotal in delivering the best athletes in the world the advantage they need Full carbon construction, Tubeless Ready Clincher rim with wider profile to accommodate and maximize tire widths 28-35mm Bonded-in hubs to ensure maximum strength and stiffness Item Specifications Color Black Defined Color Carbon Front Axle 12mm Thru x 100mm Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rim Material Carbon Rim Width (Internal) 25.2 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 700c Reserve Wheels Reserve Infinity Disc Front Wheel Front Wheel UPC: 192219494821

by Reserve Wheels

—$2,199

Whether you are planning to leave it all out there on Queen Ka'ahumanu Highway or just strutting your stuff at a local time trial, the Reserve 77/88 not only looks the part but delivers the speed. Developed using Turbulent Aero technology, the mixed profile front and rear setup of the 77|88 provides for maximum stability, lowest weight and optimized aerodynamics. Built with DT Swiss Hubs The 77/88 marks a milestone in the evolution of road wheel aerodynamics, where real world data and Turbulent Aero technology is used to design the fastest, most stable wheelset for real riders in real world conditions The mixed profile front and rear setup of the 77/88 provides for maximum stability, lowest weight and optimized aerodynamics. The rear wheel is asymmetrical, which creates a stronger, stiffer and more durable wheel Reserve has traveled the US, mapping different types of wind conditions, and then used this data to replicate real world conditions in the wind tunnel. All this work culminated in the creation of the first wheelset designed with Turbulent Aero technology Tubeless Ready Clincher rim accmodates tire widths 25-30mm Item Specifications Cassette Body Type SRAM XDR Color Carbon Defined Color Black Front Axle 12mm Thru x 100mm Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 142mm Rim Material Carbon Rim Width (Internal) 24 Rim Width (Internal) 25 Tire Type Tubeless Ready Valve Presta Wheel Size 700c Reserve Wheels Reserve 77/88 Turbulent Aero Wheelset Wheelset UPC: 192219464381

by Reserve Wheels

—$892.99

Ride Light. Log Miles. Get Loose. The Era SL wheel was designed to bridge two riding disciplines with the goal of excelling at both ends of the spectrum. Not your typical XC race wheel, nor a strength-forward Enduro wheel. A happy medium, designed specifically for the mass of riders who sit happily in between. At 385 grams, the Era SL rim is the lightest ever produced by Race Face. That low rotational mass allows quick acceleration and maintains momentum on climbs. The complete wheel is light enough for the weekend XC racer who wants to push their bike well beyond the demands of your typical XC course Era SL uses a 22mm rim depth to keep strength up so you can throw your little bike head-first into the rough stuff without remorse or hesitation. The 29mm internal width allows up to 2.6-inch tires for all your low-pressure, low rolling resistance, high traction needs Laced to the proven and reliable Vault Hub, Era SL is made to be laterally compliant, smoothing out the small bumps and lowering rider fatigue, all while keeping that XC pedal efficiency. With 3-degrees of engagement and large-diameter bearings, Vault keeps spinning for years of daily punishment Carbon fiber rim construction, tubeless ready with tape and valves included Item Specifications Cassette Body Type Shimano Micro Spline Color Carbon Black Defined Color Carbon Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 148mm Rim Width (Internal) 29 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 29" RaceFace Era SL Rear Wheel Rear Wheel UPC: 821973509952

by RaceFace

—$2,499

Reserve returns with the ultimate climbing wheelset; the 34/37 Turbulent Aero. Developed using Turbulent Aero data and technology, the 34/37 TA is designed to help get you up those mountain passes as fast as possible. Comparted to the original 34/37, the revised TA set is 30 grams lighter per rim, and 4 grams faster in the wind tunnel. And in keeping with Reserve workmanlike ways, you'll find external nipples, standard spokes, no tire limitations with a semi-hooked design and no rider weight limits. Carbon SL Rim for additional weight savings Built with DT Swiss Hubs Includes XDR and HG11 freehub bodies Designed to be your no fuss climbing wheelset. There are no weight limits, no tire limitations, and can be set up tubeless or with tubes Mixed profile front and rear rims provide maximum stability, lowest weight and optimized aerodynamics Internally reinforced spoke holes to strengthen the area where the rim sees the most force, around the spoke nipple. This provides for improved strength without adding unnecessary weight Lifetime warranty supported by a no-fault crash replacement Item Specifications Cassette Body Type Shimano HG 11/12-Speed Road Cassette Body Type SRAM XDR Color Carbon Defined Color Black Front Axle 12mm Thru x 100mm Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 142mm Rim Material Carbon Rim Width (Internal) 22 Rim Width (Internal) 22.8 Tire Type Tubeless Ready Valve Presta Wheel Size 700c Reserve Wheels Reserve 34/37 Turbulent Aero Wheelset Wheelset UPC: 192219510101

by Reserve Wheels

—$2,199

Developed and tested using Turbulent Aero technology, the 42/49 is designed for everything you do, providing all-day capability with aerodynamic sensibilities. Raced at events as varied as the Paris-Roubaix and the Giro D'Italia, the 42/49 wheels have a lifetime warranty supported by a no-fault crash replacement. And in keeping with Reserve workmanlike ways, you'll find external nipples, standard spokes, no tire limitations with a semi-hooked design and no rider weight limits. Built with DT Swiss Hubs Wind tunnel tested using Computational Fluid Dynamics (CFD), with the goal of maximizing aerodynamics while enhancing stability Optimized carbon fiber rim construction allows Reserve to define the exact fiber orientation for each rim model, to maximize stiffness and strength without sacrificing weight Item Specifications Cassette Body Type SRAM XDR Color Carbon Defined Color Black Front Axle 12mm Thru x 100mm Hub/Brake Compatibility Center-Lock Disc ISO Diameter 622 / Road / 29" Rear Axle 12mm Thru x 142mm Rim Material Carbon Rim Width (Internal) 24.8 Rim Width (Internal) 25.4 Tire Type Tubeless Ready Valve Presta Wheel Size 700c Reserve Wheels Reserve 42/49 Turbulent Aero Wheelset Wheelset UPC: 192219464213

by Reserve Wheels