Components

—$21.25

9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 8 Frame Mount Width 35.56 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973391045

by FOX

—$15.86

Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 10 Frame Mount Width 18.5 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868627

by RockShox

—$19.99

Air Spring Volume Reduction Kit Cane Creek Air Spring Volume Reduction Kit Rear Shock Part UPC: 840226076980

by Cane Creek

—$37

Standard Steel Springs in a wide variety of spring weights and travel. The 35 mm/1.385" Internal diameter also fits DVO, MRP and X-Fusion shocks.Spring markings: 500 lbs x 3.64" Item Specifications I.D. (mm) 36.5 Material Steel Spring Weight 500 Stroke (ins) 3.5 FOX Steel Coil Spring Rear Shock Spring

by FOX

—$149.98

Super Alloy Racing Springs are availible in 25lb increments and dyno tested. All springs are shipped with a dyno graph for proof of accuracy. Super Alloy Racing springs help to maximise suspension performance as well as reducing weight and increasing traction and sensitivity. Manufactured by Eibach to our Specifications Enduro spring stroke length: Designed for shocks with less than 65mm Material: Silicone Chrome Vanadium steel POM Bearings are required to fit your shock and are sold separately. The Super Alloy Racing POM Bearing system allows your SAR spring to fit any shock on the market. In addition to universal compatibility, these adapters reduce spring bind-up and reduce weight by enabling the use of the shortest possible spring. POM (polyoxymethylene) is a CNC grade polymer, allowing machining to precision tolerances whilst also preventing spring binding during use. *** Super Alloy Racing Springs NEED the POM Spacer Kit to convert to your shock, make sure to get the POM Spacer Kit that matches your shock.Spring markings: 650 lbs x 65mm Item Specifications I.D. (mm) 36.5 Material Steel Spring Weight 650 Stroke (ins) 2.5 Super Alloy Racing SAR Enduro Rear Shock Spring UPC: 5060719340359

by Super Alloy Racing

—$149.98

Super Alloy Racing Springs are availible in 25lb increments and dyno tested. All springs are shipped with a dyno graph for proof of accuracy. Super Alloy Racing springs help to maximise suspension performance as well as reducing weight and increasing traction and sensitivity. Manufactured by Eibach to our Specifications Enduro spring stroke length: Designed for shocks with less than 65mm Material: Silicone Chrome Vanadium steel POM Bearings are required to fit your shock and are sold separately. The Super Alloy Racing POM Bearing system allows your SAR spring to fit any shock on the market. In addition to universal compatibility, these adapters reduce spring bind-up and reduce weight by enabling the use of the shortest possible spring. POM (polyoxymethylene) is a CNC grade polymer, allowing machining to precision tolerances whilst also preventing spring binding during use. *** Super Alloy Racing Springs NEED the POM Spacer Kit to convert to your shock, make sure to get the POM Spacer Kit that matches your shock.Spring markings: 550 lbs x 65mm Item Specifications I.D. (mm) 36.5 Material Steel Spring Weight 550 Stroke (ins) 2.5 Super Alloy Racing SAR Enduro Rear Shock Spring UPC: 5060719340076

by Super Alloy Racing

—$115.69

Ohlin's latest generation spring series combines race-ready weights with big mountain strength. Cutting edge heat treatments and advanced materials enable us to stress our spring coils harder without damage, meaning we can build them stronger and lighter than before. All spring series come with as little as 4 Nm/23 lbs increments enabling you to find the perfect spring for your bike and riding style. If you need more than two turns of preload, we recommend switching to a stiffer spring in order to get the best performance. If you have any questions regarding this item please reach out to our educated customer service staff. 805-375-4525. Ohlins Coil Rear Shock Spring

by Ohlins

—$115.69

Ohlin's latest generation spring series combines race-ready weights with big mountain strength. Cutting edge heat treatments and advanced materials enable us to stress our spring coils harder without damage, meaning we can build them stronger and lighter than before. All spring series come with as little as 4 Nm/23 lbs increments enabling you to find the perfect spring for your bike and riding style. If you need more than two turns of preload, we recommend switching to a stiffer spring in order to get the best performance. If you have any questions regarding this item please reach out to our educated customer service staff. 805-375-4525. Ohlins Coil Rear Shock Spring

by Ohlins

—$115.69

Ohlin's latest generation spring series combines race-ready weights with big mountain strength. Cutting edge heat treatments and advanced materials enable us to stress our spring coils harder without damage, meaning we can build them stronger and lighter than before. All spring series come with as little as 4 Nm/23 lbs increments enabling you to find the perfect spring for your bike and riding style. If you need more than two turns of preload, we recommend switching to a stiffer spring in order to get the best performance. If you have any questions regarding this item please reach out to our educated customer service staff. 805-375-4525. Ohlins Coil Rear Shock Spring

by Ohlins

—$115.69

Ohlin's latest generation spring series combines race-ready weights with big mountain strength. Cutting edge heat treatments and advanced materials enable us to stress our spring coils harder without damage, meaning we can build them stronger and lighter than before. All spring series come with as little as 4 Nm/23 lbs increments enabling you to find the perfect spring for your bike and riding style. If you need more than two turns of preload, we recommend switching to a stiffer spring in order to get the best performance. If you have any questions regarding this item please reach out to our educated customer service staff. 805-375-4525. Ohlins Coil Rear Shock Spring

by Ohlins

—$25

5-Piece Stainless Steel Mounting Hardware The new resin hardware reduces friction by nearly 50% compared to traditional mounting hardware O-rings and the flanged bushing design blocks out dirt and mud Item Specifications Bolt Mount Diameter 8 Frame Mount Width 35.5 FOX 5-Piece Stainless Steel Rear Shock Mount Kit UPC: 821973371177

by FOX

—$24.60

5-Piece Stainless Steel Mounting Hardware The new resin hardware reduces friction by nearly 50% compared to traditional mounting hardware O-rings and the flanged bushing design blocks out dirt and mud Item Specifications Bolt Mount Diameter 8 Frame Mount Width 25.1 FOX 5-Piece Stainless Steel Rear Shock Mount Kit UPC: 821973371146

by FOX

—$10.38

RockShox Volume Reducer Kits RockShox Volume Reducer Rear Shock Part UPC: 710845849374

by RockShox

—$26

Stainless Steel Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 10 Frame Mount Width 33.53 FOX Stainless Steel Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973392844

by FOX

—$21.50

9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 8 Frame Mount Width 42.19 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973391106

by FOX

—$21.50

9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 6 Frame Mount Width 32.05 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973390413

by FOX

—$15.92

Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 9.5 Frame Mount Width 22.2 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868573

by RockShox

—$15.92

Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 10 Frame Mount Width 17.4 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868610

by RockShox

—$15.86

Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 8 Frame Mount Width 57 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868535

by RockShox

—$17.44

Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 8 Frame Mount Width 42 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868399

by RockShox

—$17.44

Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 8 Frame Mount Width 60 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868559

by RockShox

—$15.86

Rear Shock Mounting Hardware Designed to fit RockShox rear shocks, except the BAR (contact SRAM for 12mm BAR hardware) Compatible with most 1/2"x1/2" rear shock eyelets. Consult manufacturer for compatibility 1 kit required per eyelet (2 kits required per rear shock) Item Specifications Bolt Mount Diameter 8 Frame Mount Width 41 RockShox Rear shock mounting hardware Rear Shock Mount Kit UPC: 710845868375

by RockShox

—$11.79

Replacement parts for Fox rear shock service and repair. FOX Rear Shock Parts Rear Shock Part UPC: 611056177075

by FOX

—$40

Thru-axles engineered for a better ride! Designed and tested in the rugged conditions of Colorado, these thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look. A unique captive rotating thru-axle washer reduces friction on dropouts during installation, allowing for a precise fit and prevents damage when torquing. Whether you are looking to upgrade or replace an existing factory axle, these thru-axles will fit a wide variety of bike and fork models. Designed, machined and tested in Colorado, USA 5mm hex on both ends of the axle for easy installation and removal 7075 aluminum with hard anodized finish for extra durability Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage Axle length is compatible +/- 2mm An ideal replacement for OEM thru-axles Item Specifications Axle Diameter (mm) 15 Color Black Front Axle Type 15mm Thru Axle Length 158 Overall Length (mm) 158 Thread Length (mm) 9 Thread Pitch 1.5 Wheels Manufacturing Front Thru Axle Thru Axle UPC: 811079029492

by Wheels Manufacturing

—$929

Gravel riders who want to get wild choose the RockShox Rudy XPLR. It's efficient for days of triple-digit mileage while delivering control and comfort when things get rough. Rudy rides on the superlight Charger Race Day 2 damper with 2-position Compression adjustment: Open and a rock-solid, sprint-ready Lock. Rudy offers precise steering with its 30mm chassis and compatibility for full or short fenders. Gravel riding keeps evolving-isn't it time to ride a fork that's on the cutting edge? Charger Race Day 2 Damper every detail perfected, every extra ounce shaved away, is RockShox's lightest performance-driven damper and features 2 Compression positions: Open or a rock-solid Lock Solo Air spring is specifically tuned for short travel Machined and anodized aluminum crown is exceptionally lightweight and durable Maxima Plush Dynamic Lower Leg Lube reduces friction and enhances fork performance ride after ride 3-bolt mounts to fit a short fender (RockShox fender included) Full fender compatibility using custom stealth stay bosses (sold separately) Maxima Plush damping fluid reduces friction and silences damper noise Fits up to 700x50 tires Item Specifications Axle to Crown Length 435 Brake Type Flat Mount Color Gloss Black Crown Race 40 Defined Color Black Designed for ebike Yes External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 12mm Thru x 100mm keyword search RockShox Model Year 25 keyword search RockShox MY25 Lockout Switch Crown Maximum Tire Width 50 Negative Spring Air Offset 45 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 30 Steerer Type Tapered Travel (mm) 40 Wheel Size 700c RockShox RUDY Ultimate XPLR Race Day 2 Suspension Fork Suspension Fork UPC: 710845904097

by RockShox

—$45

DebonAir+ Air Shaft Assembly for RockShox suspension forks. RockShox DebonAir+ Air Shaft Assembly Upgrade Air Springs & Parts UPC: 710845878763

by RockShox

—$68

200 Hour Service Kit for the repair and maintenance of RockShox forks. Performing yearly maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. RockShox 200 Hour Fork Service Kit Service Kit UPC: 710845877995

by RockShox

—$42

Thru-axles engineered for a better ride! Designed and tested in the rugged conditions of Colorado, these thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look. A unique captive rotating thru-axle washer reduces friction on dropouts during installation, allowing for a precise fit and prevents damage when torquing. Whether you are looking to upgrade or replace an existing factory axle, these thru-axles will fit a wide variety of bike and fork models. Designed, machined and tested in Colorado, USA 5mm hex on both ends of the axle for easy installation and removal 7075 aluminum with hard anodized finish for extra durability Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage Axle length is compatible +/- 2mm An ideal replacement for OEM thru-axles Item Specifications Axle Diameter (mm) 12 Color Black Length 164 Overall Length (mm) 164 Rear Axle Type 12mm Thru-axle Thread Length (mm) 10 Thread Pitch 1.5 Wheels Manufacturing Rear Thru Axle Thru Axle UPC: 811079029393

by Wheels Manufacturing

—$6.99

Top Caps for Fox suspension fork service and repair. FOX Top Caps Adjuster Knob & External Hardware UPC: 611056171158

by FOX

—$310

RockShox Fork Compression Dampers RockShox Fork Compression Dampers Damper, Compression UPC: 710845836886

by RockShox

—$43.99

MTB fork seals are a vital protective part of the overall front suspension system, with a crucial impact on riding comfort and trouble-free operation in the harshest environments. This completely redesigned fork seal - adding on to SKF's well established fork seals range that has already been available on the market for more than 10 years - consists of newly developed rubber compounds and new geometries for both the scraper lip and the sealing lip. The co-molded combination of compounds, together with improved sealing lip properties, offers enhanced followability on the shaft. In addition, there is a new metal insert and an open wound spring on the dirt scraper lip, effectively preventing the ingress of contaminants. Fits FOX Air 32mm, All Models Extended sealing capability Improved contamination exclusion Reliable protection of the interior fork mechanism Minimum friction for enhanced control SKF Dual Compound Seal Kit Seal Kit EAN: 8050616066008

by SKF

—$307

RockShox 32mm Crown/Steerer/Uppertube Assemblies Item Specifications keyword search 11.4018.008.344 keyword search 114018008344 RockShox 32mm Crown/Steerer/Upper Tube Assembly Crown/Steerer/Uppertube Assembly UPC: 710845751851

by RockShox

—$395

RockShox 35mm Crown/Steerer/Uppertube Assemblies RockShox 35mm Crown/Steerer/Upper Tube Assembly Crown/Steerer/Uppertube Assembly UPC: 710845769696

by RockShox

—$125

Make a good fork a great fork. Introducing the Luftkappe air piston kit for Fox Float forks. The Luftkappe is available for: 34 Float NA2 (2016-17) Performance & Factory Series (130mm + only - 120mm and lower need the 2018 Evol air shaft before a Luftkappe can be fitted) 34 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA (2015-17) Performance & Factory Series (max 180mm travel, min 120mm travel) Pinkbike: "The Luftkappe's change to the feel of the Lyrik was immediately noticeable on the trail. Traction was increased across chatter and the fork remained higher in its travel and more stable, improving the dynamic ride height without sacrificing the top end. My confidence soared when hitting sections with a lot of chatter and mid to large-sized hits, and the result meant more comfort and speed through such sections." Taking everything we learned with the Corset air sleeves and the Luftkappe we developed for the Pike, Yari & Lyrik, this second generation Luftkappe is a new air piston assembly for Fox's 34 NA2/Evol and 36 Evol forks. User installable and simple to set up, the Luftkappe transforms a good fork into a great fork. Softer initial stroke Larger negative air chamber Increased sag without the associated diving Coil-like initial & mid-stroke spring rate without excessive bottoming Increased sensitivity Improved mid stroke support & control Superior bump compliance and traction Reduced hand fatigue Reduces required compression damping Retains volume spacer compatibility Optional tools available for self-install What's included in the kit: 34 Evol: Upgrade low friction air piston assembly. 34 NA2: Upgrade low friction air piston assembly & upgrade low friction, low profile sealhead 36 Evol: Upgrade low friction air piston assembly. 36 NA: Upgrade low friction air piston assembly & upgrade topout spacer ring Note: If your 36 Evol tops out noticeably, you will need to replace your air shaft assembly before purchasing the Luftkappe. Fox have updated this part due to the topout issues that many of the 2018 36 Evol forks had. 34 forks do not have this issue. Relevant Fox part numbers for the new air shaft assemblies, by travel: 180mm: 820-02-534-KIT 170mm: 820-02-535-KIT 160mm: 820-02-536-KIT 150mm: 820-02-537-KIT 140mm: 820-02-538-KIT 100mm (36 831): 820-02-539-KIT If your fork does not have noticeable top-out issues, you don't need to replace the shaft before installing the Luftkappe. FAQ: 1. Can I install it myself? Yes, provided you have access to the supplies and tools listed in the installation instructions above. If you're really crafty (and EXTREMELY careful) it is possible to install the Luftkappes (all Evol variants) without the installation tools, however the risk of damaging things is much higher and we really don't recommend trying. If you choose to take this route and damage your air shaft (or anything else), we cannot be held responsible - we make the tools available for a reason. It is not possible to install the 34 NA2 Luftkappe kit without 10mm shaft clamps and the bullet tool - you'll damage the shaft AND damage the seals on the new sealhead. 2. Does it work with TALAS forks? No, sorry. 3. Does it work with versions of the 36 prior to 2015? No, sorry! 4. Does it work with 32s or 40s? No, sorry. 5. How does it actually work? It enlarges the negative air chamber to reduce the initial spring rate. This lets you run higher air pressure for more support in the middle and end of the stroke with improved sensitivity in the start of the stroke. 6. Is it compatible with MRP's Ramp Control cartridge? Generally speaking no. If you are running your fork at least 30mm shorter than its maximum available travel, then yes. 7. Shouldn't I just buy a new fork instead? Sure, they're about the same price as the Luftkappe. 8. What parts does it actually replace in the air spring? It replaces the plastic piston itself, and the rubber topout bumper in the 34s is removed but not replaced (36 topout assembly is unchanged). You reuse your air shaft, though the 34NA2 kit comes with a replacement low friction, low profile sealhead comparable in size to the stock 2018 Evol sealhead. This is also why the NA2 kit is more expensive than the other two - it's basically a 2018 Factory update on top of a Luftkappe. 9. Who is this NOT suited for? The Luftkappe is outright superior to the stock air spring for nearly everyone, however there are a few cases where it might not be for you: - If you run your 36 at 180mm, it will be quite progressive. You may like it, but you may also find it hard to use the last 5-10mm of travel - if this would bother you then have a think about it first. At 170mm and below it will be fine. - If you like running really low sag for some reason. The Luftkappe runs more sag than the stock fork, but is firmer in the mid stroke - similar to a coil fork, but with ending-stroke ramp up to prevent harsh bottoming. If you're the kind of person who wants the fork to run 5% sag, this isn't for you. We could point out that a setup like that probably just means your handlebars are set too low and you're compensating with oversprung suspension, but we aren't here to judge you, so maybe just don't buy it. - If you're anal about your fork having an exact (but rounded-to-the-nearest-10mm) amount of travel. Because the Luftkappe balances forces at a pneumatic topout, the force right around topout is very low (literally zero other than friction), meaning the weight of the bike alone will cause it to sag a few millimetres. Your car's suspension sags under the vehicle's own weight, so should your bike - unless it was so sticky, overly stiff or over-preloaded that 10kg of bike weight wasn't enough to cause your suspension to move at all, of course. If only having an apparent 148mm out of a 150mm fork is a big deal for you, stick with the stock fork. (in)Compatibility Information: Luftkappe IS available for: 34 Float NA2 (Performance, Performance Elite and Factory Series, 2016-17), 130mm and higher travel 34 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA1 (NA) Not compatible with: Rhythm-series forks E-bike specific forks Non-Evol (pre-2018) 36 forks 34mm forks for 29" wheels with 150mm or more travel Pre-2016 34 forks Pre-2016 34 forks that were later updated with the factory NA air system update Any TALAS forks Any 32mm forks Any 40mm forks Vorsprung Luftkappe Air Springs & Parts

by Vorsprung

—$115

Make a good fork a great fork. Introducing the Luftkappe air piston kit for Fox Float forks. The Luftkappe is available for: 34 Float NA2 (2016-17) Performance & Factory Series (130mm + only - 120mm and lower need the 2018 Evol air shaft before a Luftkappe can be fitted) 34 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA2 Evol (2018+) Performance & Factory Series 36 Float NA (2015-17) Performance & Factory Series (max 180mm travel, min 120mm travel) Pinkbike: "The Luftkappe's change to the feel of the Lyrik was immediately noticeable on the trail. Traction was increased across chatter and the fork remained higher in its travel and more stable, improving the dynamic ride height without sacrificing the top end. My confidence soared when hitting sections with a lot of chatter and mid to large-sized hits, and the result meant more comfort and speed through such sections." Taking everything we learned with the Corset air sleeves and the Luftkappe we developed for the Pike, Yari & Lyrik, this second generation Luftkappe is a new air piston assembly for Fox's 34 NA2/Evol and 36 Evol forks. User installable and simple to set up, the Luftkappe transforms a good fork into a great fork. Softer initial stroke Larger negative air chamber Increased sag without the associated diving Coil-like initial & mid-stroke spring rate without excessive bottoming Increased sensitivity Improved mid stroke support & control Superior bump compliance and traction Reduced hand fatigue Reduces required compression damping Retains volume spacer compatibility Optional tools available for self-install What's included in the kit: 34 Evol: Upgrade low friction air piston assembly. 34 NA2: Upgrade low friction air piston assembly & upgrade low friction, low profile sealhead 36 Evol: Upgrade low friction air piston assembly. 36 NA: Upgrade low friction air piston assembly & upgrade topout spacer ring Note: If your 36 Evol tops out noticeably, you will need to replace your air shaft assembly before purchasing the Luftkappe. Fox have updated this part due to the topout issues that many of the 2018 36 Evol forks had. 34 forks do not have this issue. Relevant Fox part numbers for the new air shaft assemblies, by travel: 180mm: 820-02-534-KIT 170mm: 820-02-535-KIT 160mm: 820-02-536-KIT 150mm: 820-02-537-KIT 140mm: 820-02-538-KIT 100mm (36 831): 820-02-539-KIT If your fork does not have noticeable top-out issues, you don't need to replace the shaft before installing the Luftkappe. FAQ: 1. Can I install it myself? Yes, provided you have access to the supplies and tools listed in the installation instructions above. If you're really crafty (and EXTREMELY careful) it is possible to install the Luftkappes (all Evol variants) without the installation tools, however the risk of damaging things is much higher and we really don't recommend trying. If you choose to take this route and damage your air shaft (or anything else), we cannot be held responsible - we make the tools available for a reason. It is not possible to install the 34 NA2 Luftkappe kit without 10mm shaft clamps and the bullet tool - you'll damage the shaft AND damage the seals on the new sealhead. 2. Does it work with TALAS forks? No, sorry. 3. Does it work with versions of the 36 prior to 2015? No, sorry! 4. Does it work with 32s or 40s? No, sorry. 5. How does it actually work? It enlarges the negative air chamber to reduce the initial spring rate. This lets you run higher air pressure for more support in the middle and end of the stroke with improved sensitivity in the start of the stroke. 6. Is it compatible with MRP's Ramp Control cartridge? Generally speaking no. If you are running your fork at least 30mm shorter than its maximum available travel, then yes. 7. Shouldn't I just buy a new fork instead? Sure, they're about the same price as the Luftkappe. 8. What parts does it actually replace in the air spring? It replaces the plastic piston itself, and the rubber topout bumper in the 34s is removed but not replaced (36 topout assembly is unchanged). You reuse your air shaft, though the 34NA2 kit comes with a replacement low friction, low profile sealhead comparable in size to the stock 2018 Evol sealhead. This is also why the NA2 kit is more expensive than the other two - it's basically a 2018 Factory update on top of a Luftkappe. 9. Who is this NOT suited for? The Luftkappe is outright superior to the stock air spring for nearly everyone, however there are a few cases where it might not be for you: - If you run your 36 at 180mm, it will be quite progressive. You may like it, but you may also find it hard to use the last 5-10mm of travel - if this would bother you then have a think about it first. At 170mm and below it will be fine. - If you like running really low sag for some reason. The Luftkappe runs more sag than the stock fork, but is firmer in the mid stroke - similar to a coil fork, but with ending-stroke ramp up to prevent harsh bottoming. If you're the kind of person who wants the fork to run 5% sag, this isn't for you. We could point out that a setup like that probably just means your handlebars are set too low and you're compensating with oversprung suspension, but we aren't here to judge you, so maybe just don't buy it. - If you're anal about your fork having an exact (but rounded-to-the-nearest-10mm) amount of travel. Because the Luftkappe balances forces at a pneumatic topout, the force right around topout is very low (literally zero other than friction), meaning the weight of the bike alone will cause it to sag a few millimetres. Your car's suspension sags under the vehicle's own weight, so should your bike - unless it was so sticky, overly stiff or over-preloaded that 10kg of bike weight wasn't enough to cause your suspension to move at all, of course. If only having an apparent 148mm out of a 150mm fork is a big deal for you, stick with the stock fork. (in)Compatibility Information: Luftkappe IS available for: 34 Float NA2 (Performance, Performance Elite and Factory Series, 2016-17), 130mm and higher travel 34 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA2 Evol (Performance, Performance Elite and Factory Series, 2018+) 36 Float NA1 (NA) Not compatible with: Rhythm-series forks E-bike specific forks Non-Evol (pre-2018) 36 forks 34mm forks for 29" wheels with 150mm or more travel Pre-2016 34 forks Pre-2016 34 forks that were later updated with the factory NA air system update Any TALAS forks Any 32mm forks Any 40mm forks Vorsprung Luftkappe Air Springs & Parts

by Vorsprung

—$325

Transform your existing RockShox Pike, Lyrik or Yari suspension fork into the ultimate trail fork. The ACS3 coil conversion kit combines small bump sensitivity, traction, and mid stroke support of a coil with the big hit performance of an air spring. By using coil springs, you can eliminate the constant maintenance required to keep your fork running optimally! Fits 2014-2017 RockShox Boost 27.5 Pike/2018-Current 27.5 and 29 Pike Includes Air Bump Stop, Spring Assembly, Lower Plunger Rod, retaining ring and travel indicator adapter Reduced friction for smoother overall fork performance Air Bump Stop cartridge technology to control the bigger hits towards the end of the travel PUSH Industries ACS3 Coil Component Kit RockShox Coil Springs & Parts UPC: 840031600103

by PUSH Industries

—$27

Top Caps for Fox suspension fork service and repair. FOX Top Caps Adjuster Knob & External Hardware UPC: 611056146941

by FOX

—$50

RockShox Seal Head Assemblies RockShox Fork Seal Head Air Springs & Parts UPC: 710845862922

by RockShox

—$349

FOX 36 Crown/Steerer/Uppertube Assembies for service and repair. FOX 36 Crown/Steerer/Uppertube Assemblies Crown/Steerer/Uppertube Assembly

by FOX

—$166

32 Grip Damper Assembly for FOX suspension fork service and repair. FOX 32 Grip Damper Damper, Compression UPC: 611056149157

by FOX

—$429

FOX 36 Crown/Steerer/Uppertube Assembies for service and repair. FOX 36 Crown/Steerer/Uppertube Assemblies Crown/Steerer/Uppertube Assembly UPC: 821973456058

by FOX

—$245

RockShox 35mm Crown/Steerer/Uppertube Assemblies RockShox 35mm Crown/Steerer/Upper Tube Assembly Crown/Steerer/Uppertube Assembly UPC: 710845838385

by RockShox

—$45

Rudy XPLR Debonair shaft for repair and maintenance of Rockshox suspension. RockShox Rudy XPLR Debonair Shaft Air Springs & Parts UPC: 710845871757

by RockShox

—$74

Dropper post levers are something a lot of us overlook, we want our dropper to work but don't think about the button that makes the magic happen. After testing a bunch of levers, from the plastic ones to the ergonomically weird, even the best in class, PNW decided they could do EVEN better. So they made the Loam Lever V2. It's the most adjustable lever around, ensuring you can modify it to fit your exact ergonomic specifications. The levers grippy injection molded pad has got your back in sloppy weather conditions. And speaking of weather, we made sure the whole thing was as weather proof as possible, meaning your lever won't squeak, bind up or fail after being in the rain. The changes in Loam Lever Gen 2 stemmed directly from customer feedback for those looking for a wider range of adjustment and a larger contact patch on the thumb pad. PNW focused on these two areas while keeping all of the great features that have made their Loam Lever one of the best dropper post levers available - high-end construction, smooth lever action and feel, and ride-or-die reliability in all weather conditions. **Product image is shown without mount and may not match title. Please confirm your fitment matches the title before purchase** THE LOAM LEVER HAS 5 KEY CHARACTERISTICS: Adjustability - We believe precision matters, this lever provides two forms of adjustment so you can dial in your perfect placement. Weather Proof - Oversized high quality sealed bearing paired with an additional seal and all stainless hardware for longevity and durability. No Slip Grip - Speaking of weather, the Loam Lever features a grippy injection molded thumb pad to keep your paws in place in even the sloppiest of conditions. Techy AF - Custom CNC machining throughout the whole design of the Loam Lever for precision and weight reduction. Direct Mount - Available in SRAM's MatchMaker X, Shimano's I-Spec II and I-Spec EV ***Inner cable no longer included in the packaging. Package includes the lever, selected clamp and mounting hardware*** TECH SPECS: Clamp Styles: Standard 22.2mm Hinge Clamp 31.8mm Hinge Clamp for road bars SRAM MatchMaker X (Code, Guide, excluding Level T versions) Shimano I-Spec II (XTR M9000, XT M8000, SLX M7000, DEORE M6000) Shimano I-Spec EV (Shimano I-SPEC EV XTR M9100/M9120, XT M8100/M8120, SLX M7100/M7120, Deore M6100/M6120) Weight: 36g w/o clamp Works with just about all dropper posts with cable routing from either direction 1x Shifter Style We don't believe in waste: 100% recyclable packaging PNW Loam V2 Dropper Remote Dropper Seatpost Remote UPC: 810035874657

by PNW

—$259

The Transfer rises again with a full redesign, making it smoother and more robust than ever before. With easier actuation, enhanced serviceability and greater tunability, the 2025 Transfer gets an overall edge over the competition. Now travel adjustable in 5mm increments and available up to 240mm of drop. Performance Elite Transfer Posts retain the same internals as the Factory Series but have a black anodized upper. Fully redesigned hydraulics of the 2025 Transfer feature an entirely new sealing system for enhanced durability. The full-service interval is now at 300 hours, which most riders can do with the tools in their garage Metal-backed EKONOL (PTFE/Teflon) bushings to achieve tight tolerances and the lowest possible friction to allow easier actuation The placement of the new air chamber allows riders to recharge and adjust air pressure through a Schrader valve under the seat clamps. Tune to your preferred return speed or adjust for environmental factors such as altitude or ambient air temperature. A metal valve cap with O-ring (the same we use on FOX suspension) ensures zero air leaks through the valve Low stack height and 2-bolt clamp design that riders loved from the previous Transfer, while improving aesthetics and keeping weight to a minimum Wider range of options, with up to 240mm of drop, and adjustable travel (up to 25mm in 5mm increments) Cable actuated with tool-free quick disconnect for easier installation Item Specifications Actuation Cable Remote Adjustment Infinite Cable Routing Internal Clamp Style Standard Rails Color Black Anodized Defined Color Black Diameter 31.6 Length 541 Material Aluminum Max Height 246 Min Height 331 Offset (mm) 0 Travel (mm) 210 Weight 667 FOX Transfer Performance Elite Dropper Seatpost Dropper Seatpost UPC: 821973488875

by FOX

—$350

Mechanical Ain't Dead Dropper Remote Sold Separately The new REVIVE 3.0 is the latest evolution of our flagship model, benefitting from already very successful 10 years of experience with its predecessors. We didn't touch anything proven, and so the famed reliable and buttery smooth hydraulic system remains untouched, yet we have succeeded in making our multiple award-winner even better. The most important features and highlights of REVIVE 3.0 include: new saddle clamps for a 5mm lower stack height a new 360° rotatable foot unit shortens the overall length of the seat post by further 10 mm new slide-on cable barrel for easier installation new BikeYoke cables (3mm housing + 0.9mm polished and coated stainless wire) travel reduction in 5mm increments (4x5mm spacer included) 3D-forged, one-piece upper tube for increased stiffness and strength redesigned actuation linkage for imprived feel and feedback two-piece saddle bolts with integrated conical washers for easier saddle mounting The Revive 3.0 is available in four different lengths, all of which allowing for infinitely adjustable drop. Its extremely short stack height helps to maximize the drop on your bike. The low overall weight and the unrivaled smoothness, even under cold temperatures, should also be highlighted. If you are right in between two sizes, you may opt for the longer one, as the drop, and thus the overall length of the post can be reduced using 5mm spacers. This allows you to get the most of the available drop without the need to opt for a shorter version. Although all our remotes will work with the REVIVE THREE, we recommend our Triggy Alpha long for light and defined, actuation due to its longer paddle. REVIVE 3.0 includes 1x REVIVE THREE seatpost 1x cable housing 1600mm 1x inner wire 1800mm 1x cable barrel 2x housing endcap 1x cable crimp 1x air valve adapter 1x Quick-Reset-Lever 4x 5mm travel adjust spacer 1x remote (optional) Dropper Remote Sold Separately Bike Yoke Revive 3 Dropper Seatpost Dropper Seatpost UPC: 4713291522750

by Bike Yoke

—$56

FOX Transfer Neo remote provides easy actuation via wireless communication to the Neo Transfer dropper post. FOX Transfer Neo Dropper Post Remote Dropper Seatpost Part UPC: 821973491745

by FOX

—$56

FOX Transfer Neo remote provides easy actuation via wireless communication to the Neo Transfer dropper post. FOX Transfer Neo Dropper Post Remote Dropper Seatpost Part UPC: 821973491875

by FOX

—$48

Chris King riders have, for years, paired their headsets, bottom brackets and hubs together to provide a few, classy pops of color to their bikes. The King Seatpost Clamp adds that simple visual cue at the top of your bike to compliment the rest of your Chris King components. Aluminum collar with stainless steel bolt, washer, and barrel nut Available in multiple color options to match other King components Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm Made in the USA with a Lifetime Warranty Item Specifications Color Black Defined Color Black Diameter 31.8 Material Aluminum Type Bolt-On Chris King King Seatpost Clamp Seatpost Clamp UPC: 841529258509

by Chris King

—$219.99

The Easton EC90 SL ISA Seatpost combines Easton's superlight unidirectional carbon with their patent-pending saddle adjustment functionality, allowing for perfect fitment. Easton's ISA technology allows you to refine your positioning without needing to undo your rail clamps for each minute tweak Saddle angle is then locked in place so you have the confidence your saddle will stay put after you find your fit Item Specifications Clamp Style Standard Rails Color Black Defined Color Black Diameter 27.2 Length 350 Material Carbon Offset (mm) 20 Easton EC90 SL Carbon Seatpost Seatpost UPC: 821973354996

by Easton