—$76.95

Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. Made from 7075 Aluminum for long life Not compatible with 9 speed chains Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Optimized for use with 10, 11, and 12 speed chains Chainline is 49mm Item Specifications Material Aluminum Offset 6 Defined Color Black Ring Position/TYPE Chain Retaining Single Ring Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Tooth Count 30 Direct Mount Type Direct Mount CINCH Round or Oval Round Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainline/Hub Compatibility 170/177 Hubs Chainline/Hub Compatibility 190/197 Hubs Wolf Tooth RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719020916

by Wolf Tooth

—$64.99

Cinch Oval rings help you put down the watts in the best part of our pedal stroke, on your 10, 11 or 12 speed drivetrains. Ovals provide enhanced traction control when compared to conventional round rings, particularly in high torque, low cadence riding scenarios. We ve got your timing clocked to improve on that grueling climb. Or simply make your personal pedal-shuttle a little more bearable. And by simply flipping the ring, it becomes Super Boost compatible without losing the same excellent timing to help you maintain traction during the toughest part of your push Optimized pedal stroke 1x drivetrain variable width tooth profile stops dropped chains Super Boost compatible Wear resistant 7075 Aluminium Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 141/148 Boost Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainline/Hub Compatibility 170/177 Hubs Chainline/Hub Compatibility 190/197 Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 28 RaceFace Narrow Wide Oval Direct Mount Chainring Direct Mount Chainrings UPC: 821973339351

by RaceFace

—$81.95

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 3mm offset is designed for Boost 52mm chainline Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 3 Round or Oval Oval Tooth Count 30 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006808117

by Wolf Tooth

—$44.99

RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH and everything in-between. Non-threaded bolt holes 7075-T6 aluminum, aerospace grade strength Compatible with 9, 10, 11 and 12 speed Stiff 4mm plate thickness and I-beam construction transfer loads without flexing Reversible laser etched graphics Item Specifications Chainring BCD 104 Color Red Defined Color Red Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Ring Position/Type Chain Retaining Single Ring Tooth Count 32 RaceFace Narrow Wide Chainring Chainring UPC: 821973330662

by RaceFace

—$107

Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. Fully CNC Aluminum ring construction Eagle technology provides an expanded, optimum, gear range for 1x drivetrains X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise Designed to be used with Eagle 12-speed chains SRAM Direct Mount Compatibility Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Material Aluminum Offset 3 Round or Oval Round Tooth Count 34 SRAM X-Sync 2 Eagle Direct Mount Chainring Direct Mount Chainrings UPC: 710845787591

by SRAM

—$44.99

RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH and everything in-between. Non-threaded bolt holes 7075-T6 aluminum, aerospace grade strength Compatible with 9, 10, 11 and 12 speed Stiff 4mm plate thickness and I-beam construction transfer loads without flexing Reversible laser etched graphics Item Specifications Chainring BCD 104 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Ring Position/Type Chain Retaining Single Ring Tooth Count 36 RaceFace Narrow Wide Chainring Chainring UPC: 821973330730

by RaceFace

—$91.39

Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. Fully CNC Aluminum ring construction Eagle technology provides an expanded, optimum, gear range for 1x drivetrains X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise Designed to be used with Eagle 12-speed chains SRAM Direct Mount Compatibility Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Material Aluminum Offset 3 Round or Oval Round Tooth Count 34 SRAM X-Sync 2 Eagle Direct Mount Chainring Direct Mount Chainrings UPC: 710845787492

by SRAM

—$79.95

absoluteBLACK Oval 104/64 BCD Chainrings greatly improve traction and climbing abilities. They are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, RaceFace, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum, and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2 - 14.4%, with timing of 110.5-116.3 after TDC (top dead center). For 48.5mm chainlines 32T chainring has built-in 2mm spacers and threaded holes (M8x0.75) to accommodate this size on a spider Use with absoluteBLACK long chainring bolts 41g Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding The unique patent-pending narrow-wide tooth profile keeps the chain in place Teeth have been 3D-machined for ultimate mud shedding and quieter operation Provides excellent weight to strength ratio 9, 10, 11 and 12-speed Eagle compatible 32T oval ring will suit best someone who uses 31 or 32T chainring currently. While pedalling, you will feel similar effort to the one riding round 31T ring, but you will gain the speed similar to riding 34T chainring. Item Specifications Chainring BCD 104 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Material Aluminum Ring Position/Type Chain Retaining Single Ring Tooth Count 32 absoluteBLACK Oval 104/64 BCD 4-Bolt Chainring Chainring EAN: 5110846000920

by absoluteBLACK

—$77.99

Narrow Wide Direct Mount CINCH Hyperglide+ Chainring Only compatible with Hyperglide + chains Designed for use with 12-speed Shimano drivetrains Narrow Wide tooth profiling ensures consistent chain retention Item Specifications Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 12 Material Aluminum Round or Oval Round Tooth Count 32 RaceFace Narrow Wide Direct Mount CINCH Hyperglide+ Direct Mount Chainrings UPC: 821973358079

by RaceFace

—$69.99

Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders. Compatible with 9, 10, 11 and 12-speed (excluding Shimano 12-speed chains) Narrow Wide tooth profiling ensures consistent chain retention Lockring installed/removed with ISIS BB tool Stiff 4mm plate thickness to transfer loads without flexing Item Specifications Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Round or Oval Round Tooth Count 26 RaceFace Narrow Wide Direct Mount CINCH Chainring Direct Mount Chainrings UPC: 821973329741

by RaceFace

—$64.95

Designed to fit 94 BCD 4-Bolt cranks such as the SRAM X1 crank, these rings will provide maximal chain retention and minimal noise. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life 49mm chainline Use of a clutch-style rear derailleur is recommended Item Specifications Chainring BCD 94 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Ring Position/Type Chain Retaining Single Ring Tooth Count 32 Wolf Tooth 94 BCD 4-Bolt Chainrings Chainring UPC: 810006800333

by Wolf Tooth

—$42

Designed for use with a 104 BCD interface of any 104 BCD spider, This chainring utilizes SRAM's T-TYPE design and is backwards compatible with Eagle technology (X-SYNC II). SRAM drivetrain engineers optimized this ring to combat the high-torque, high-wear situations e-bike riders face. The aggressive tooth design provides better chain retention for a smoother, more efficient pedal feel with a focus on long wear-life. High durability steel construction Backwards compatible with other Eagle Technology AeroGuard compatible with steel rings that Fufills EN 15194:2017 standard Item Specifications Chainring BCD 104 Color Black Defined Color Black Drivetrain Speeds 12 Material Steel Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 34 SRAM Eagle T-Type 104BCD Chainring Chainring UPC: 710845888380

by SRAM

—$79.95

These Wolf Tooth Elliptical Direct Mount Chainrings are designed to work with Cane Creek eeWings cranksets and SRAM direct mount cranksets with a 3-bolt interface. The proprietary Powertrac design has an ovality of 10% and a timing of 112 degrees after top dead center, providing benefits such as greater rear wheel traction. The tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain. Nickel plated chainrings are designed to be compatible with Cane Creek eeWings cranksets Compatible with Shimano 12-speed Hyperglide+ chains on bikes with boost and non-boost spacing Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Silver Direct Mount Type Direct Mount SRAM Drivetrain Speeds 12 Material Aluminum Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 32 Wolf Tooth Elliptical 3-Bolt Direct Mount Chainring for Hyperglide+ Chain Direct Mount Chainrings UPC: 810006801774

by Wolf Tooth

—$74.99

Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders. Compatible with 9, 10, 11 and 12-speed (excluding Shimano 12-speed chains) Narrow Wide tooth profiling ensures consistent chain retention Lockring installed/removed with ISIS BB tool Stiff 4mm plate thickness to transfer loads without flexing Item Specifications Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Round or Oval Round Tooth Count 34 RaceFace Narrow Wide Direct Mount CINCH Chainring Direct Mount Chainrings UPC: 821973329987

by RaceFace

—$44.99

RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH and everything in-between. Non-threaded bolt holes 7075-T6 aluminum, aerospace grade strength Compatible with 9, 10, 11 and 12 speed Stiff 4mm plate thickness and I-beam construction transfer loads without flexing Reversible laser etched graphics Item Specifications Chainring BCD 104 Color Blue Defined Color Blue Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Ring Position/Type Chain Retaining Single Ring Tooth Count 32 RaceFace Narrow Wide Chainring Chainring UPC: 821973330624

by RaceFace

—$81.95

Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 49mm chainline / 6mm offset for standard spacing Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainline/Hub Compatibility 170/177 Hubs Chainline/Hub Compatibility 190/197 Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 30 Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719021814

by Wolf Tooth

—$44.99

RaceFace Narrow Wide Hyperglide+ 1x chainrings are made of 4mm thick 7075-T6 alloy plate for stiffness and strength. Only compatible with Hyperglide + chains Designed for use with 12-speed Shimano drivetrains Narrow Wide tooth profiling ensures consistent chain retention Item Specifications Chainring BCD 104 Color Black Defined Color Black Drivetrain Speeds 12 Material Aluminum Ring Position/Type Single Tooth Count 34 RaceFace Narrow Wide Hyperglide+ Chainring Chainring UPC: 821973359779

by RaceFace

—$79.95

This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. Compatible only with Hyperglide+ chains For use with Shimano XTR M9100 series cranksets Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention Prevents premature ring and chain wear that can come from non-optimized profiles Item Specifications Defined Color Black Direct Mount Type Direct Mount Shimano Drivetrain Speeds 12 Material Alloy Offset 3 Round or Oval Round Tooth Count 30 Wolf Tooth Shimano Hyperglide+ Direct Mount Chainrings Direct Mount Chainrings UPC: 810006800692

by Wolf Tooth

—$72.40

SRAM X-SYNC 2 Eagle 1x chainrings provide a high level of performance and durability. The aggressive tooth design provides better chain retention for a smoother, more efficient pedal feel. With a focus on long wear-life, the design reduces friction and the accumulation of mud, grit and grime.The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain Item Specifications Chainring BCD 94 Color Black Defined Color Black Drivetrain Speeds 11 Ring Position/Type Chain Retaining Single Ring Tooth Count 30 SRAM X-SYNC 2 Chainring Chainring UPC: 710845827075

by SRAM

—$42

Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. Cold forged Aluminum ring Eagle Technology tooth profile Approximate +10g in weight compared to the fully CNC version Item Specifications Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Material Aluminum Offset 6 Tooth Count 34 SRAM X-Sync 2 Eagle Cold Forged Direct Mount Chainring Direct Mount Chainrings UPC: 710845808562

by SRAM

—$71.95

Designed for 104 BCD Mountain Cranksets. The proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the benefits of an oval ring without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life These rings are threaded, use with 10mm chainring bolts 48mm - 50mm chainline depending on the crankset Item Specifications Chainring BCD 104 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 32 Wolf Tooth Elliptical 104 BCD Chainrings Chainring UPC: 812719021548

by Wolf Tooth

—$74.99

Narrow Wide Direct Mount CINCH Hyperglide+ Chainring Only compatible with Hyperglide + chains Designed for use with 12-speed Shimano drivetrains Narrow Wide tooth profiling ensures consistent chain retention Item Specifications Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 12 Material Aluminum Round or Oval Round Tooth Count 30 RaceFace Narrow Wide Direct Mount CINCH Hyperglide+ Direct Mount Chainrings UPC: 821973356563

by RaceFace

—$74.99

Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders. Compatible with 9, 10, 11 and 12-speed (excluding Shimano 12-speed chains) Narrow Wide tooth profiling ensures consistent chain retention Lockring installed/removed with ISIS BB tool Stiff 4mm plate thickness to transfer loads without flexing Item Specifications Defined Color Red Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Round or Oval Round Tooth Count 32 RaceFace Narrow Wide Direct Mount CINCH Chainring Direct Mount Chainrings UPC: 821973330495

by RaceFace

—$115.28

Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. Oval ring shape for riders that want to adjust the power profile of their pedal stroke.The only oval rings with X-Sync 2 tooth design Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 34 SRAM X-Sync 2 Eagle Oval Direct Mount Chainring Direct Mount Chainrings UPC: 710845804687

by SRAM

—$19.99

Narrow Wide Direct Mount CINCH Hyperglide+ Chainring Only compatible with Hyperglide + chains Designed for use with 12-speed Shimano drivetrains Narrow Wide tooth profiling ensures consistent chain retention Item Specifications Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 12 Material Steel Round or Oval Round Tooth Count 32 RaceFace Narrow Wide Direct Mount CINCH Hyperglide+ Direct Mount Chainrings UPC: 821973391489

by RaceFace

—$95.95

absoluteBLACK 1x Oval Direct Mount Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider, and will only work with 12-speed Hyperglide+ chains. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum, and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2 - 14.4%, with timing of 110.5-116.3 after TDC (top dead center). 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/Long Spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks 55g This chainring will only work with Shimano Hyperglide+ CN-M9100, 8100 & 7100 chains due to different thickness of the teeth Teeth have been 3D-machined for ultimate mud shedding and quieter operation 3mm offset converts any SRAM crank into Boost setup needed in Boost equipped bikes Designed for GXP, DUB and long-spindle BB30 cranks Provides excellent weight to strength ratio 30T Oval chainring has an ovality of 28/32T and is best for someone who uses currently 29 or 30T round ring. Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 12 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 30 absoluteBLACK Oval Direct Mount Chainring for SRAM and Hyperglide+ Direct Mount Chainrings EAN: 5110846004447

by absoluteBLACK

—$35.06

SRAM 11-Speed Chainrings Item Specifications Color Black Material Aluminum Teeth 34teeth Chainring BCD 110mm Ring Position Inner Chain Compatibility SRAM 11 Defined Color Black SRAM Road 22 Chainring Chainring UPC: 710845729942

by SRAM

—$81.95

Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 49mm chainline / 6mm offset for standard spacing Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainline/Hub Compatibility 170/177 Hubs Chainline/Hub Compatibility 190/197 Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 32 Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719021821

by Wolf Tooth

—$64.99

Narrow Wide Direct Mount 3-Bolt Chainring 7075-T6 aluminum, aerospace grade strength Stiff 4mm plate thickness to transfer loads without flexing Item Specifications Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Round or Oval Round Tooth Count 26 RaceFace Narrow Wide Direct Mount 3-Bolt Direct Mount Chainrings UPC: 821973330914

by RaceFace

—$81.95

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 6mm offset designed for use with cyclocross and road cranksets (47mm chainline) or GXP and long spindle BB30 cranksets (49mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 170/177 Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 28 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719022231

by Wolf Tooth

—$99.99

RaceFace Turbine Chainrings are designed for optimal shifting performance and minimal weight, in 11-speed off-road applications. Sold as a set Asymmetrical tooth profiling and up-shift/down-shift zones create smooth and quiet shifting under load Three times stiffer than Race Face Team chainrings without additional weight gain CNC-machined from 7075 aluminum Item Specifications Chainring BCD 104 Chainring BCD 64 Color Black Defined Color Black Drivetrain Speeds 11 Ring Position/Type Inner Ring Position/Type Outer Tooth Count 26 Tooth Count 36 RaceFace Turbine 11-Speed Chainrings Chainring UPC: 821973286938

by RaceFace

—$79.95

This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. Compatible only with Hyperglide+ chains For use with Shimano XTR M9100 series cranksets Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention Prevents premature ring and chain wear that can come from non-optimized profiles Item Specifications Defined Color Black Direct Mount Type Direct Mount Shimano Drivetrain Speeds 12 Material Alloy Offset 3 Round or Oval Round Tooth Count 32 Wolf Tooth Shimano Hyperglide+ Direct Mount Chainrings Direct Mount Chainrings UPC: 810006800708

by Wolf Tooth

—$49.99

RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH and everything in-between. 30t Narrow-Wide single rings are threaded with a standard M8 x 0.75 chainring bolt thread 7075-T6 aluminum, aerospace grade strength Compatible with 9, 10, 11 and 12 speed Stiff 4mm plate thickness and I-beam construction transfer loads without flexing Reversible laser etched graphics Item Specifications Chainring BCD 104 Color Blue Defined Color Blue Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Ring Position/Type Chain Retaining Single Ring Tooth Count 30 RaceFace Narrow Wide Chainring Chainring UPC: 821973329864

by RaceFace

—$69.99

Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders. Compatible with 9, 10, 11 and 12-speed (excluding Shimano 12-speed chains) Narrow Wide tooth profiling ensures consistent chain retention Lockring installed/removed with ISIS BB tool Stiff 4mm plate thickness to transfer loads without flexing Item Specifications Defined Color Blue Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Round or Oval Round Tooth Count 30 RaceFace Narrow Wide Direct Mount CINCH Chainring Direct Mount Chainrings UPC: 821973329925

by RaceFace

—$81.95

Designed to fit 4-arm 96 Asymmetric BCD XT M8000 Cranks. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. Not compatible with XTR9000 series cranksets The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075 Aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainring BCD 96 Shimano Asymmetric Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Ring Position/Type Chain Retaining Single Ring Tooth Count 32 Wolf Tooth Elliptical 96 Asymmetrical BCD Chainrings for Shimano XT M8000/SLX M7000 Chainring UPC: 812719022415

by Wolf Tooth

—$76.95

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 3mm offset is designed for boost cranksets (52mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 34 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719026192

by Wolf Tooth

—$88.86

Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. Fully CNC Aluminum ring construction Eagle technology provides an expanded, optimum, gear range for 1x drivetrains X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise Designed to be used with Eagle 12-speed chains SRAM Direct Mount Compatibility Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Material Aluminum Offset 6 Round or Oval Round Tooth Count 32 SRAM X-Sync 2 Eagle Direct Mount Chainring Direct Mount Chainrings UPC: 710845787430

by SRAM

—$53

SRAM X-Sync chainrings feature tall teeth with alternating tooth profiles that hold the chain amazingly well and still provide space for mud to clear.Full CNC AL rings Item Specifications Chainring BCD 110 SRAM Asymmetric Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Ring Position/Type Chain Retaining Single Ring Tooth Count 44 SRAM X-Sync Chainring Chainring UPC: 710845804519

by SRAM

—$84.95

Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Round or Oval Round Tooth Count 40 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006801156

by Wolf Tooth

—$19.95

This Shimano chainring allows you to update your Ultegra FC-R8000 11-speed crankset with a chainring configuration to best fit your riding style. Integrates Shimano Hollowglide Technology: the high rigidity hollow structure cuts down on weight, yet maintains strength to provide better power transfer and quicker, more precise front shifting Features a weight saving 4-bolt design with a BCD of 110 mm Item Specifications Chainring BCD 110 Shimano Asymmetric Color Black Defined Color Black Drivetrain Speeds 11 keyword search CR8172 keyword search Y1P434000 Ring Position/Type Inner Tooth Count 34 Shimano Ultegra R8000 11-Speed Chainring UPC: 689228744608

by Shimano

—$64.95

Designed to fit 94 BCD 4-Bolt cranks such as the SRAM X1 crank, these rings will provide maximal chain retention and minimal noise. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life 49mm chainline Use of a clutch-style rear derailleur is recommended Item Specifications Chainring BCD 94 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Ring Position/Type Chain Retaining Single Ring Tooth Count 30 Wolf Tooth 94 BCD 4-Bolt Chainrings Chainring UPC: 810006800340

by Wolf Tooth

—$85.95

absoluteBLACK Oval 94 BCD 1x Chainrings greatly improve traction and climbing abilities. They are designed for SRAM X01, X1, GX, NX and GX Eagle cranks. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum, and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2 - 14.4%, with timing of 110.5-116.3 after TDC (top dead center). 43g Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding The unique patent-pending narrow-wide tooth profile keeps the chain in place Teeth have been 3D-machined for ultimate mud shedding and quieter operation Provides excellent weight to strength ratio For 48mm chainline Rings have built-in threads for easy of mounting and reduction in weight Chainring bolts are included 30T Oval chainring has an ovality of 28/32T and is best for someone who uses currently 29 or 30T round ring. Item Specifications Chainring BCD 94 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Material Aluminum Ring Position/Type Chain Retaining Single Ring Tooth Count 30 absoluteBLACK Oval 94 BCD 4-Bolt Chainring Chainring EAN: 5110846001057

by absoluteBLACK

—$95.97

Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. Fully CNC Aluminum ring construction Eagle technology provides an expanded, optimum, gear range for 1x drivetrains X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise Designed to be used with Eagle 12-speed chains SRAM Direct Mount Compatibility Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Material Aluminum Offset 6 Round or Oval Round Tooth Count 30 SRAM X-Sync 2 Eagle Direct Mount Chainring Direct Mount Chainrings UPC: 710845787423

by SRAM

—$69.95

The Wolf Tooth 76 BCD chainrings fit any SRAM 76 BCD spider or Specialized Stout crankset. Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Item Specifications Chainring BCD 76 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Ring Position/Type Chain Retaining Single Ring Tooth Count 32 Wolf Tooth 76 BCD Chainrings Chainring UPC: 812719025447

by Wolf Tooth

—$81.95

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 6mm offset designed for use with cyclocross and road cranksets (47mm chainline) or GXP and long spindle BB30 cranksets (49mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 170/177 Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 32 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719021524

by Wolf Tooth

—$69.95

The Wolf Tooth 76 BCD chainrings fit any SRAM 76 BCD spider or Specialized Stout crankset. Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Item Specifications Chainring BCD 76 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Ring Position/Type Chain Retaining Single Ring Tooth Count 30 Wolf Tooth 76 BCD Chainrings Chainring UPC: 812719025430

by Wolf Tooth

—$17.96

XT 10-Speed M785 ChainringsFor use with 38t AM-type outer ring Item Specifications Material Aluminum Teeth 24teeth Chainring BCD 64mm Ring Position Inner Chain Compatibility Shimano 10 Shimano XT M785 10-Speed Chainring UPC: 689228931640

by Shimano

—$81.95

Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 3mm offset is designed for boost cranksets (52mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search SRAM T-Type keyword search SRAM Transmission Material Aluminum Offset 3 Round or Oval Oval Tooth Count 32 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006808124

by Wolf Tooth

—$89.95

absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum, and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2 - 14.4%, with timing of 110.5-116.3 after TDC (top dead center). 6mm offset is designed for 135/142 spacing on standard DUB/GXP/Long Spindle BB30, as well as 170/177 spacing on fatbike cranks Designed for GXP, DUB and long-spindle BB30 cranks 55g Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding The unique patent-pending narrow-wide tooth profile keeps the chain in place Teeth have been 3D-machined for ultimate mud shedding and quieter operation Provides excellent weight to strength ratio 30T Oval chainring has an ovality of 28/32T and is best for someone who uses currently 29 or 30T round ring. Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 170/177 Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 30 absoluteBLACK Oval Direct Mount Chainring for SRAM 3-Bolt Cranks Direct Mount Chainrings EAN: 5110846000326

by absoluteBLACK

—$49.99

RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH and everything in-between. 30t Narrow-Wide single rings are threaded with a standard M8 x 0.75 chainring bolt thread 7075-T6 aluminum, aerospace grade strength Compatible with 9, 10, 11 and 12 speed Stiff 4mm plate thickness and I-beam construction transfer loads without flexing Reversible laser etched graphics Item Specifications Chainring BCD 104 Color Red Defined Color Red Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Ring Position/Type Chain Retaining Single Ring Tooth Count 30 RaceFace Narrow Wide Chainring Chainring UPC: 821973330341

by RaceFace