Bottom Bracket Tool

—$62.95

Tools designed by Park Tool to service Bottom Brackets. Removes and installs the bearings and bearing units used in BB86, BB90, BB92, Shimano, SRAM, GXP, Race Face and other press fit bottom bracket systems using a 24mm spindle Includes: bearing removal tool and two installation bushings (#669) Park Tool BBT PressFit Bottom Bracket Tool UPC: 763477000644 MPN: BBT-90.3

by Park Tool

—$38.95

Tools designed by Park Tool to service Bottom Brackets. For removing and installing Shimano, Race Face, FSA, Truvativ, Sram, Campagnolo and similar bottom bracket cups with 16 external notches Also works with Shimano to remove and install 8-point Shimano Hollowtech II crank arm adjusting caps Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477000491 MPN: BBT-9

by Park Tool

—$26.95

Tools designed by Park Tool to service Bottom Brackets. Used to remove and install all Shimano Octalink and ISIS Drive Splined 20-tooth bottom bracket cups 3/8" drive with 1" wrench flats Park Tool BBT Series Bottom Bracket Tool UPC: 763477000385 MPN: BBT-22

by Park Tool

—$10.99

Bottom Bracket Lock Ring ToolAdaptor to allow 8mm hex tool to be used on 16mm CINCH bolt and puller cap RaceFace Bottom Bracket Bottom Bracket Tool UPC: 895428019181 MPN: D30351

by RaceFace

—$31.99

This tool is made specifically and only for RaceFace BSA30 Bottom Brackets. RaceFace made a proprietary tool to install that BB and this is it. You only need one tool to install the BB. RaceFace Bottom Bracket Bottom Bracket Tool UPC: 895428013622 MPN: D30146

by RaceFace

—$35

The SRAM DUB Bottom Bracket Wrench is designed for use with SRAM DUB threaded bottom brackets.3/8" ratchet compatible allows you to torque your bottom bracket to spec SRAM DUB Bottom Bracket Wrench Bottom Bracket Tool UPC: 710845827037 MPN: 00.6418.029.000

by SRAM

—$29.95

Park Tool bottom bracket tools for installation and removal of 16 notch bottom brackets. Fits 16-notch tool fittings with a major diameter (outside of notches) of 44 45 mm and a minor diameter (inside of notches) of 42.7 mm, including: Shimano BB80, BB5700, XT BB70, BB51, and previous external bearing threaded bottom bracket cups Threaded bottom bracket cups from Campagnolo , Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels, Fulcrum, and others Center lock disc brake rotor lockrings Bafang BBSH, BBS02 mid-drive motor lockrings Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477001658 MPN: BBT-69.4

by Park Tool

—$30.95

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM BSA DUB, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45-47 mm and a minor diameter (inside of notches) of 44 mm, including: SRAM BSA DUB, Race Face Cinch, Rotor BSA30, Zipp Vuma, Hawk Racing BB3086, and more 3/8" drive fitting Park Tool BBT-79.3 Bottom Bracket Tool - 12-Notch Bottom Bracket Tool UPC: 763477001641 MPN: BBT-79.3

by Park Tool

—$43.50

Double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. Machined aluminum Anodized red Wheels Manufacturing Bottom Bracket Wrench Bottom Bracket Tool UPC: 811079023759 MPN: WRENCH-BB48-44

by Wheels Manufacturing

—$22.95

Park Tool bottom bracket tools for installation and removal of 16 notch bottom brackets. Made from high precision, hardened chromoly steel the BBT-19.2 can be turned with a 3/8" drive wrench, 1" wrench or Park Tool FRW-1 Freewheel Remover Wrench For installing & Removing Shimano, Truvativ, Race Face, FSA, Sram & Campagnolo 16-notch external bearing 44mm OD bottom bracket cups Fits most thru-axle Centerlock lock rings Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477000521 MPN: BBT-19.2

by Park Tool

—$58.95

BBT PressFit Bottom Bracket Tool Set Designed and built to install and remove of the bearings used in bearings used in BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems BBT-30.4 features a bushing set used in conjunction with a head cup press to quickly and precisely press the BB30 and PF30 bearings in the bottom bracket shell The included BB30 bearing remover works from inside the shell to easily push out bearing Park Tool BBT PressFit Bottom Bracket Tool UPC: 763477000958 MPN: BBT-30.4

by Park Tool

—$69

Double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. Double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups Compatible with all Wheels Manufacturing bottom brackets Socket is machined for 1/2" drive, but a 3/8" to 1/2" adaptor is included so you can use it with 3/8" drive torque wrenches 48.5mm, 16-notch pattern matches up with Wheels Mfg bottom brackets, along with some FSA MegaEVO bottom brackets 44mm, 16-notch side matches up with Wheels Manufacturing bottom brackets, along with many other outboard bearing bottom brackets including Shimano, FSA MegaEXO and SRAM/Truvativ Machined aluminum Anodized red Wheels Manufacturing Bottom Bracket Wrench Bottom Bracket Tool UPC: 811079024558 MPN: BBTOOL-48-44

by Wheels Manufacturing

—$32.95

Tools designed by Park Tool to service Bottom Brackets. Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477000583 MPN: BBT-29

by Park Tool

—$13.95

Tools designed by Park Tool to service Bottom Brackets. Fits adjusting cup on many adjustable type bottom brackets Round pin ends have a diameter of 2.9mm Park Tool SPA Series Bottom Bracket Tool UPC: 763477006738 MPN: SPA-1

by Park Tool

—$19.99

Tools designed by Shimano to service Bottom Brackets.Fits all Shimano Hollowtech II bottom bracket cups except Dura-Ace BB9000 & Ultegra BBR60 Shimano Bottom Bracket Tool Bottom Bracket Tool UPC: 689228097421 MPN: Y13009210

by Shimano

—$29.99

Bottom Bracket Lock Ring Tool1.2" drive RaceFace Bottom Bracket Bottom Bracket Tool UPC: 821973010069 MPN: D30020

by RaceFace

—$34.95

Tools designed by Park Tool to service Bottom Brackets. Designed for heavy duty use, the distance between the pins is adjustable, allowing use on virtually all hanger cups using pin holes Uses hardened, replaceable pins approximately 2.2mm in diameter Park Tool SPA Series Bottom Bracket Tool UPC: 763477006837 MPN: SPA-6

by Park Tool

—$17.08

Tools designed by Park Tool to service Bottom Brackets. For installation & removal of Shimano & ISIS drive splined 20-tooth bottom bracket cups 32mm Wrench flats Park Tool BBT Series Bottom Bracket Tool UPC: 763477000590 MPN: BBT-32

by Park Tool

—$27.95

Tools designed by Park Tool to service Bottom Brackets. Used to remove and install all Shimano ISIS Drive and ISIS Overdrive eight-notch bottom bracket cups 36mm wrench flats Park Tool BBT Series Bottom Bracket Tool UPC: 763477000514 MPN: BBT-18

by Park Tool

—$29.95

Park Tool bottom bracket tools for installation and removal of 16 notch bottom brackets. Fits 16-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 41 42 mm and a minor diameter (inside of notches) of 39 mm Fits Shimano Ultegra BBR60, and Deore XT MT-800 Item Specifications keyword search Deore XT MT-800 keyword search Ultegra BBR60 Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477001627 MPN: BBT-59.3

by Park Tool

—$30.95

12-Notch external bearing bottom bracket tool. Ratchet/torque wrench-compatible 3/8" drive Fits: BBInfinite T47, Chris King ThreadFit T47, Chris King ThreadFit 30, Enduro BBRight Torqtite, Hambini T47, Rotor T47 External 30mm, Rotor BBright, BB30, BB386EVO, and PF30 thread-together Park Tool BBT 12 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477001399 MPN: BBT-47-12

by Park Tool

—$239.99

The Park Tool BBP-1.2 Bottom Bracket Bearing Press Set quickly and accurately installs bottom bracket bearings, cups and adaptors into press fit bottom bracket shells. The complete set of precision-machined bushings match up with most common bottom bracket cup dimensions The press assembly features a comfortable handle, oversized shaft, and magnetic back plate for quick and easy assembly Magnetic quick-release design allows for fast installation and removal of tool Organized in a convenient storage case 6 sets of precision-machined bushings (in 9 sizes) to fit these bottom bracket configurations: 386EVO, BB30, BB86, BB90, BB92, BB95, BB121, BMX Mid, BMX Spanish, OSBB, PF41, Press Fit 24, PressFit GXP , BBright Direct Fit, PF30 BBright Press Fit, Shimano Press Fit, and All Press Fit DUB Compatible with bottom bracket shell widths from 68mm to 150mm Park Tool BBP Series Bottom Bracket Bearing Press Bottom Bracket Tool UPC: 763477000880 MPN: BBP-1.2

by Park Tool

—$30.95

Park Tool bottom bracket tools for installation and removal of 16 notch bottom brackets. Ratchet/torque wrench-compatible 3/8" drive Fits: CeramicSpeed T47/86, Enduro T47 (30mm and DUB spindles), Enduro BB30/30a TorqTite (30mm and DUB spindles), Kogel T47, SRAM T47 DUB, White Industries T47, and White Industries PF30 Thread-Together Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477001405 MPN: BBT-47-16

by Park Tool

—$26.95

Park Tool bottom bracket tools for installation and removal of 16 notch bottom brackets. 16 notch 39mm OD cups Fits: Shimano XTR BB93, Dura-Ace BB9000, Token Added depth to fit Shimano STEPS square drive motor Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477000828 MPN: BBT-49.2

by Park Tool

—$36.95

Tools designed by Park Tool to service Bottom Brackets. Features a proven Y-head design for leverage 36mm box-end and bottom bracket pin spanner Center to center measurment between pins is 29mm and pin diameter is nominally 2.3mm Park Tool HCW Series Bottom Bracket Tool UPC: 763477004031 MPN: HCW-4

by Park Tool

—$47.95

Bottom brackets have some of the highest torque specs of any component found on a bicycle. Despite this, some bottom bracket cups feature tool fittings that allow mere millimeters of engagement, which can be a problem when attempting removal or installation. Solution: the Park Tool Bottom Bracket Tool Retaining System. Used in conjunction with nearly any Park Tool bottom bracket tool, the BBT-RS uses a spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. The BBT-RS can be configured for use with the vast majority of threaded and thread-together bottom bracket standards. The BBT-RS features an M8 threaded rod and a double-sided adapter nut with M12 and M15 threads, allowing it to thread directly into any compatible cartridge bottom bracket. The M15 adapter can also be used to install any of Park Tool's nine aluminum bottom bracket tools, all of which feature integrated threading for use with the BBT-RS. Washer diameter: 57 mm (2.25") Rod length: 175 mm (6.9") Rod threading: M8 x 1.0 Adapter nut threading: M12 x 1.0 & M15 x 1.0 Park Tool BBT-RS Bottom Bracket Tool Retaining System Bottom Bracket Tool UPC: 763477001603 MPN: BBT-RS

by Park Tool

—$11.95

Tools designed by Park Tool to service Bottom Brackets. Uses a 1" hex shape Fits the splined 12-tooth Campagnolo bottom bracket cups found on the square type spindle systems (Record, Chorus, Centaur and Athena) Removes and installs Campagnolo cassette lockrings including 11 speed Park Tool BBT Series Bottom Bracket Tool UPC: 763477003515 MPN: BBT-5/FR-11

by Park Tool

—$29.95

Park Tool bottom bracket tools for installation and removal of 16 notch bottom brackets. Fits 16-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 39-40 mm and a minor diameter (inside of notches) of 37.6 mm Fits Shimano XTR BB93, Dura-Ace BB9000, and Token Also fits Shimano STEPS square spindle e-bike systems including: E6000, E6002, E6050 Replacement for Shimano TL-FC38 tool Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477001610 MPN: BBT-49.3

by Park Tool

—$32

Enduro calls it a TorqTite wrench but it actually does a lot more than that. This Tool allows you to tighten and loosen TorqTite bottom bracket cups for BB86/92, BB386 and PF30 BB shells, as well as, outboard BSA/ITA cups for 24mm spindles and all T47 cups. The BB86/92 side also works for centerlock disc brake lock-rings. Allows you to tighten and loosen TorqTite bottom bracket cups for BB86/92, BB386 and PF30 BB shells, as well as, outboard BSA/ITA cups for 24mm spindles and all T47 cups BB86/92 side also works for centerlock disc brake lock-rings This item is a single wrench, though Enduro recommends two for proper TorqTite BB installation, or a single wrench can be used in conjunction with BBT-001, BBT-015, BBT-029 or BBT-025 on the opposite side Constructed from rugged steel featuring a corrosion-resistant black finish that is designed to provide high strength for precise torque application, preventing slippage during the installation and removal of TorqTite bottom bracket cups Item Specifications keyword search spanner Enduro Torqtite Flat Wrench Bottom Bracket Tool Bottom Bracket Tool UPC: 811780020757 MPN: BBT-010

by Enduro

—$30.95

Park Tool BBT Series Bottom Bracket Tools. Fits 16-notch bottom bracket tool fittings with a major diameter of 48 50 mm and a minor diameter of 46.4 mm, including:FSA MegaEvo, and Wheels Mfg Thread Together Does not fit Hope BSA30 Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive Item Specifications keyword search FSA MegaEvo keyword search Wheels Mfg Thread Together Park Tool BBT Series Bottom Bracket Tool UPC: 763477001368 MPN: BBT-27.3

by Park Tool

—$48.50

Thin Flange Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. Compatible with all Wheels Manufacturing (Some FSA MegaEVO) bottom brackets that have the following spline patterns: 48.5mm, 16-notch, 1/2 UNC threaded Press Rod 3/8" drive can be used to allow torque wrench Machined 6061 Aluminum Wheels Manufacturing Thin Flange Bottom Bracket Socket Bottom Bracket Tool UPC: 811079027221 MPN: BP0018

by Wheels Manufacturing

—$28.95

Park Tool BBT Series Bottom Bracket Tools. Fits 12-notch bottom bracket tool fittings with a major diameter of 48 50 mm and a minor diameter of 46.3 mm, including:Praxis Works M30 Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive Item Specifications keyword search Praxis Works M30 Park Tool BBT Series Bottom Bracket Tool UPC: 763477001375 MPN: BBT-35-12

by Park Tool

—$36

Tools designed by Shimano to service Bottom Brackets. Fits Ultegra SM-BBR60 bottom bracket cups Does not fit standard size Shimano Hollowtech II bottom bracket cups 1/2' socket drive Shimano Bottom Bracket Tool Bottom Bracket Tool UPC: 689228395428 MPN: Y13009270

by Shimano

—$6.75

Tools designed by Shimano to service Bottom Brackets. Plastic bottom bracket tool adaptor to fit SM-BB9000 cups Designed for use with Shimano TL-FC24, TL-FC32 (TL6137) or similar bottom bracket tool Included in initial shipment of Dura-Ace BB9000 bottom brackets Shimano Bottom Bracket Tool Bottom Bracket Tool UPC: 689228945623 MPN: Y13009240

by Shimano

—$24

Tools designed by Shimano to service Bottom Brackets.Fits BB-7700, BB-6500, BB-5500, BB-ES70, BB-ES50 and BB-ES25 bottom brackets Shimano Bottom Bracket Tool Bottom Bracket Tool UPC: 689228000353 MPN: Y13009073

by Shimano

—$65

Tools designed by Shimano to service Bottom Brackets. 2nd version of TL-BB12 tool For installing/removing BB86/BB92 press-fit bottom bracket bearing cups Shimano Bottom Bracket Tool Bottom Bracket Tool UPC: 689228580923 MPN: Y13098255

by Shimano

—$89.84

Tools designed by Shimano to service Bottom Brackets. Shimano Bottom Bracket Tool Bottom Bracket Tool UPC: 689228949218 MPN: Y13098262

by Shimano

—$43.50

Individual extractor for removing 6806 sealed bearings with 29mm inside diameter. Wheels Manufacturing 29mm-EXT Sealed Bearing Extractor Bottom Bracket Tool UPC: 811079027610 MPN: 29MM-EXT

by Wheels Manufacturing

—$48.50

Thin Flange Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. Compatible with all Wheels Manufacturing (SRAM T47) bottom brackets that have the following spline patterns: 52mm, 16-notch 1/2 UNC threaded Press Rod Machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached Locks onto 1/2 inch UNC press rod Machined 6061 aluminum Anodized red Wheels Manufacturing Thin Flange Bottom Bracket Socket Bottom Bracket Tool UPC: 811079027252 MPN: BP0019

by Wheels Manufacturing

—$29.95

Park Tool BBT Series Bottom Bracket Tools. Fits 36-notch bottom bracket tool fittings with a major diameter of 51 53 mm and a minor diameter of 50.7 mm, including: Box Two Oversized M35, and Praxis Works M35 Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive Item Specifications keyword search Box Two Oversized M35 keyword search Praxis Works M35 Park Tool BBT Series Bottom Bracket Tool UPC: 763477001382 MPN: BBT-35-36

by Park Tool

—$48

Thin Flange Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. Single-sided socket is used for installing and removing 44mm, 16-notch bottom bracket cups Allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch UNC press rod 6061 Aluminum, anodized red Wheels Manufacturing Thin Flange Bottom Bracket Socket Bottom Bracket Tool UPC: 810124711306 MPN: BP0023

by Wheels Manufacturing

—$9.95

Tools designed by Park Tool to service Bottom Brackets. Fits one-key release retaining rings on Shimano and Campagnolo cranksets and the adjusting cone on most freewheel clusters (not freehubs) Pin diameter is nominally 0.090" (2.3mm) Park Tool SPA Series Bottom Bracket Tool UPC: 763477006752 MPN: SPA-2

by Park Tool

—$48

Thin Flange Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. This single-sided socket is used for installing and removing 44mm, 12/24-notch bottom bracket cups. The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 Aluminum Anodized Red Creates a secure grip on thin flange bottom brackets to prevent slipping during installation Compatible with 44mm, 12/24-notch bottom bracket cups and 3/8" drive torque wrenches Made from machined 6061 aluminum and anodized red for durability and visibility Wheels Manufacturing Thin Flange BB Socket for 44mm Bottom Bracket Tool UPC: 810124713256 MPN: BP0025

by Wheels Manufacturing

—$48.50

Thin Flange Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. Compatible with all Wheels Manufacturing (Praxis T47) bottom brackets that have the following spline patterns: 50mm, 12-notch 1/2 UNC threaded Press Rod Machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached Locks onto 1/2 inch UNC press rod Machined 6061 aluminum Anodized red Wheels Manufacturing Thin Flange Bottom Bracket Socket Bottom Bracket Tool UPC: 811079027269 MPN: BP0020

by Wheels Manufacturing

—$250

Thin Flange Bottom Bracket Socket Pro Kit These sockets are designed to create a tight grip on thin flange bottom brackets to avoid slipping while torquing cups into bike frames. These single-sided sockets are used for installing and removing 48.5mm 16-notch, 52mm 16-notch and 50mm 12-notch bottom bracket cups. Machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and threaded onto 1/2 inch UNC press rod Machined 6061 aluminum Anodized red Wheels Manufacturing Thin Flange Bottom Bracket Socket - Pro Kit Bottom Bracket Tool UPC: 811079027276 MPN: BP0021

by Wheels Manufacturing