—$39.99

Cane Creek 40-Series ZS(Zero Stack) assemblies feature press-in cups with bearings inside the frame. The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Item Specifications Color Black Weight 53g Material AL-6061 Stack Height 15mm Bearing Type Black Oxide Sealed S.H.I.S Upper ZS44 S.H.I.S. Clamp Diameter 28.6 Cane Creek 40-Series ZS - Zero Stack Headset Headset Upper UPC: 840226094946

by Cane Creek

—$17.99

Headset cup installation adapters allow for precise installation of Cane Creek headsets and prevent damage to both the cups and press. Precision engineered in Fletcher, NC in that one side can be used with cups featuring non-removable bearings (pressure is applied precisely on the outer race, preserving the integrity of the bearing itself), while the other is used for cups featuring removable bearings (pressure is applied to the cup race via a chamfered surface, reducing the risk of slippage) Hard anodized AL7075 to reduce wear Intended to be used in concert with a headset press tool to install any press-fit headset configuration Cane Creek Install Adaptors Headset Tool UPC: 840226084985

by Cane Creek

—$33.99

40-Series Zero Stack headsets set the standard for performance, durability and value. Drawing from the premium 110-Series design, the 40-Series includes all the features necessary for a durable, lightweight, long-lasting headset. Compatible with straight 1-1/8" steerer tubes Sealed ZN40 cartridge bearings 6000 series alloy cups and materials Steel crown race with integrated seals Interlok spacer compatible Item Specifications Bearing Type Cartridge Color Black Crown Race 30 Lower Stack Height 4 S.H.I.S Lower ZS44 Cane Creek 40-Series ZS - Zero Stack Headset Headset Lower UPC: 840226077406

by Cane Creek

—$30.99

Cane Creek 40 IS Bottom Assemblies IS52/30 Conversion Bottom fits 1-1/8" straight steerer tubes to tapered 52mm 1.5" IS bottom head-tubes Integrated (IS) assemblies feature chamfers molded inside the head-tube with no press-in cups Consistent stack heights across 10, 40 and 110 Series Internal parts are cross-compatible across 10, 40 and 110 series Durable steel crown race with low-friction face-seals Item Specifications Color Black Weight 72g Material AL-6061 Crown Race 30.0 Stack Height 1mm Bearing Type Black Oxide Sealed S.H.I.S Lower IS52 Cane Creek 40-Series IS - Integrated Headset Headset Lower UPC: 840226095226

by Cane Creek

—$119.99

Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing.Designed to bridge the gap between the 40-series and 110-series headsets Item Specifications Bearing Type Cartridge Color Black Crown Race 40 S.H.I.S Lower EC44 S.H.I.S Upper ZS44 S.H.I.S. Stem Clamp Diameter 28.6 Threadless Cane Creek Hellbender Headset Headsets UPC: 840226078540

by Cane Creek

—$99.99

Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. Springs feature the progressiveness and ramp-up that hard-charging riders demand Designed for use with Cane Creek Coil shocks Progression begins at 50% into the stroke of the spring Crafted from high-performance spring steel Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks Item Specifications I.D. (mm) 36.5 Material Steel Spring Weight 450-550 Stroke (ins) 2.56 Cane Creek Progressive VALT Spring Rear Shock Spring UPC: 840226083414

by Cane Creek

—$21.99

Replacement chainring bolts for Cane Creek eeWings. Cane Creek Chainring Bolts Chainring Bolt UPC: 840226078847

by Cane Creek

—$124.99

Offering the best in both value and performance, the Cane Creek Hellbender 70 Bottom Bracket will be an impactful and lasting upgrade to any bike. It features 440C stainless steel bearings to provide exceptional ride quality and reliability. Designed for use with 30mm spindles 440C stainless steel bearings with a dual lip seal and marine grease, offer durability and corrosion resistance 6061 T6 machined aluminum cups are lightweight and durable Item Specifications BB Shell Width (mm) 121 BB Shell Width (mm) 132 BB Shell Width (mm) 86 BB Shell Width (mm) 89.5 BB Shell Width (mm) 92 BB/Frame Interface PF41 Bottom Bracket Shell I.D. 41 Defined Color Silver keyword search Hellbender Spindle Interface Type 386 EVO Spindle Interface Type e*Thirteen P3 Connect Spindle Interface Type RaceFace/Easton CINCH Spindle Interface Type Rotor 3D+ Spindle Interface Type Zipp Vuma Weight 78 Cane Creek Hellbender 70 Bottom Bracket Bottom Brackets UPC: 840226079424

by Cane Creek

—$99.99

Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. Springs feature the progressiveness and ramp-up that hard-charging riders demand Designed for use with Cane Creek Coil shocks Progression begins at 50% into the stroke of the spring Crafted from high-performance spring steel Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks Item Specifications I.D. (mm) 36.5 Material Steel Spring Weight 450-550 Stroke (ins) 2.17 Cane Creek Progressive VALT Spring Rear Shock Spring UPC: 840226083063

by Cane Creek

—$13.40

ZN40-Series bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of your headset.Compatible with 110-, 40-, and 10-Series headsets Item Specifications Bearing I.D. (mm) 30.3 Bearing O.D. (mm) 41.8 Bearing Type Cartridge Cartridge Bearing Angle 45x45 Thickness 7 Cane Creek ZN40-Series Bearing Headset Bearing UPC: 840226152172

by Cane Creek

—$19.28

Headset cup installation adapters allow for precise installation of Cane Creek headsets and prevent damage to both the cups and press. Precision engineered in Fletcher, NC in that one side can be used with cups featuring non-removable bearings (pressure is applied precisely on the outer race, preserving the integrity of the bearing itself), while the other is used for cups featuring removable bearings (pressure is applied to the cup race via a chamfered surface, reducing the risk of slippage) Hard anodized AL7075 to reduce wear Intended to be used in concert with a headset press tool to install any press-fit headset configuration Cane Creek Install Adaptors Headset Tool UPC: 840226084978

by Cane Creek

—$24.99

The Ancora Expansion Plug is designed for use with carbon steerer tubes. Machined Aluminum expansion wedges paired with a knurled sleeve ensure a secure fit with the correct preload amount. Accepts any standard preload bolt and top cap (sold separately) Compatible with steerer tube inner diameter of 22.75 mm to 24.6 mm Insertion length: 46mm Contact surface length: 38mm Item Specifications Color Gold Cane Creek Ancora Expansion Plug Compression Plug UPC: 840226091341

by Cane Creek

—$99.99

Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. Springs feature the progressiveness and ramp-up that hard-charging riders demand Designed for use with Cane Creek Coil shocks Progression begins at 50% into the stroke of the spring Crafted from high-performance spring steel Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks Item Specifications I.D. (mm) 36.5 Material Steel Spring Weight 500-610 Stroke (ins) 2.17 Cane Creek Progressive VALT Spring Rear Shock Spring UPC: 840226083131

by Cane Creek

—$21.99

ZN40-Series bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of your headset.Compatible with 110-, 40-, and 10-Series headsets Item Specifications Bearing I.D. (mm) 34.25 Bearing O.D. (mm) 47 Bearing Type Cartridge Cartridge Bearing Angle 45x45 Thickness 7 Cane Creek ZN40-Series Bearing Headset Bearing UPC: 840226078373

by Cane Creek

—$12.99

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series Integral mold seals keep out the elements Item Specifications Crown Race 33 Cane Creek Crown Races Crown Race UPC: 840226077918

by Cane Creek

—$52.99

Cane Creek 40-Series. The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Replaces Cane Creek IS-3 headset 41mm angular contact bearings feature 36degree inner chamfer, 45degree outer (36/45) Directly compatible with 41mm head-tube and fits 42mm (Italian) head-tube with supplied 0.25mm shim Integrated (IS) assemblies feature chamfers molded inside the head-tube with no press-in cups 9mm stack height (short) top cover Item Specifications Color Black Weight 71g Material AL-6061 Crown Race 30.0 Stack Height 9mm Bearing Type Black Oxide Sealed Defined Color Black S.H.I.S Upper IS41 S.H.I.S Lower IS41 S.H.I.S. Clamp Diameter 28.6 Cane Creek 40-Series IS - Integrated Headset Headsets UPC: 840226095042

by Cane Creek

—$79.99

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP Compatible with Fox coil shocks with required spring clip adaptor Item Specifications Material Steel Spring Weight 550 Stroke (ins) 2.25 Cane Creek VALT Spring Rear Shock Spring UPC: 840226134550

by Cane Creek

—$39.99

Cane Creek Headset Uppers Innovative Clip-Seal seals the top assembly and captures the compression ring Internal parts are cross-compatible across 10, 40 and 110 series Consistent stack heights across 10, 40 and 110 series Item Specifications Color Black Weight 34g Material AL-6061 Stack Height 9mm Bearing Type Black Oxide Sealed S.H.I.S Upper IS42 S.H.I.S. Clamp Diameter 28.6 Cane Creek 40-Series IS - Integrated Headset Headset Upper UPC: 840226095189

by Cane Creek

—$36.99

Cane Creek Headset Uppers Innovative Clip-Seal seals the top assembly and captures the compression ring Internal parts are cross-compatible across 10, 40 and 110 series Consistent stack heights across 10, 40 and 110 series Item Specifications Color Black Weight 37g Material AL-6061 Stack Height 9mm Bearing Type Black Oxide Sealed S.H.I.S Upper IS41 S.H.I.S. Clamp Diameter 28.6 Cane Creek 40-Series IS - Integrated Headset Headset Upper UPC: 840226095127

by Cane Creek

—$44.99

Cane Creek 40-Series ZS(Zero Stack) assemblies feature press-in cups with bearings inside the frame. The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Item Specifications Color Black Weight 86g Material AL-6061 Crown Race 39.7 Stack Height 4mm Bearing Type Black Oxide Sealed S.H.I.S Lower ZS55 Cane Creek 40-Series ZS - Zero Stack Headset Headset Lower UPC: 840226077642

by Cane Creek

—$99.99

Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. Springs feature the progressiveness and ramp-up that hard-charging riders demand Designed for use with Cane Creek Coil shocks Progression begins at 50% into the stroke of the spring Crafted from high-performance spring steel Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks Item Specifications I.D. (mm) 36.5 Material Steel Spring Weight 400-488 Stroke (ins) 2.56 Cane Creek Progressive VALT Spring Rear Shock Spring UPC: 840226083377

by Cane Creek

—$8.95

Replacement bushings for Cane Creek shocks. Cane Creek Bushing Rear Shock Part UPC: 840226071534

by Cane Creek

—$99.99

Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. Springs feature the progressiveness and ramp-up that hard-charging riders demand Designed for use with Cane Creek Coil shocks Progression begins at 50% into the stroke of the spring Crafted from high-performance spring steel Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks Item Specifications I.D. (mm) 36.5 Material Steel Spring Weight 500-610 Stroke (ins) 2.56 Cane Creek Progressive VALT Spring Rear Shock Spring UPC: 840226083421

by Cane Creek

—$11.99

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight. Item Specifications Color Black Cane Creek Thudbuster G3 Elastomer Seatpost Part UPC: 840226085913

by Cane Creek

—$79.99

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP Compatible with Fox coil shocks with required spring clip adaptor Item Specifications Material Steel Spring Weight 500 Stroke (ins) 2.5 Cane Creek VALT Spring Rear Shock Spring UPC: 840226134451

by Cane Creek

—$79.99

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP Compatible with Fox coil shocks with required spring clip adaptor Item Specifications Material Steel Spring Weight 450 Stroke (ins) 2.25 Cane Creek VALT Spring Rear Shock Spring UPC: 840226134413

by Cane Creek

—$329.99

The Hellbender 110 Bottom Bracket provides an incredible mix of performance and longevity through the inclusion of Enduro XD-15 ceramic bearings. These bearings feature nitrogen infused stainless steel races that will not rust or corrode paired with Silicon Nitride ceramic balls. Enduro XD-15 ceramic ball bearings are made from pure silicone nitride material with extreme high density and uniform compaction The race material is an advanced stainless alloy that is nitrogen infused and will not rust or corrode Dual stage anodize black and gold machined aluminum bottom bracket cups Kluber NBU52 grease runs better and smoother with time, and is highly resistant to being washed out Designed for use with 30mm spindles Item Specifications BB Shell Width (mm) 68 BB Shell Width (mm) 73 BB/Frame Interface English Bottom Bracket Shell I.D. 1.37 Defined Color Black Spindle Interface Type e*Thirteen P3 Connect Spindle Interface Type RaceFace/Easton CINCH Spindle Interface Type Rotor 3D+ Spindle Interface Type Zipp Vuma Weight 80 Cane Creek Hellbender 110 Bottom Bracket Bottom Brackets UPC: 840226086903

by Cane Creek

—$10

Air Spring Volume Reduction Kit 1 x 5000 cubic mm spacer 2 x inner air can o-rings Cane Creek Air Spring Volume Reduction Kit Rear Shock Part UPC: 840226142623

by Cane Creek

—$1,099.99

The eeWings Mountain titanium cranks were designed to keep up with the rigorous demands of the most aggressive trail and enduro mountain bikers - though they will benefit any rider who puts a premium on durability, stiffness and weight. Ultimate in stiffness and durability while only weighing a mere 400 grams - in the same weight range as premium carbon cranks, but 20% to 30% stiffer Butted titanium arms with CNC titanium spindle and hirth joint CNC 7075-T6 aluminum BB preload adjustment ring included Compatible with SRAM 3-Bolt Direct Mount Chainring Interface 30mm spindle Fitment compatibility across multiple frame standards, bottom bracket sold separately 52mm chainline achieved with 3mm offset chainring (sold separately) 176mm Q-Factor Backed with a 10-year limited warranty. PLEASE NOTE: Use of a standard BB30 or PF30 bottom bracket with inboard bearings will void eeWings warranty. Using a PF30 or BB30 bottom bracket with outboard bearings is REQUIRED. See Tech Documents for additional information. Item Specifications BB Included No Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 141/148 Boost Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainring BCD Direct Mount SRAM Color Brushed Titanium Crank Intended Use Mountain Crank Length (mm) 175 Defined Color Gray Number of Chainrings No Rings, No Spider Included Pedal Spindle 9/16" Rings Sold Separately Spindle Interface Type 392 EVO Spindle Interface Type BB30/PF30 Spindle Interface Type RaceFace/Easton CINCH Weight 400 Cane Creek eeWings Mountain Crankset Crankset UPC: 840226078854

by Cane Creek

—$63.99

40-Series Integrated headsets set the standard for performance, durability and value. Drawing from the premium 110-Series design, the 40-Series includes all the features necessary for a durable, lightweight, long-lasting headset. Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately) Sealed ZN40 cartridge bearings 6000 series alloy cups and materials Steel crown race with integrated seals Interlok spacer compatible Item Specifications Bearing Type Cartridge Color Black Crown Race 40 Lower Stack Height 1 S.H.I.S Lower IS52 S.H.I.S Upper IS41 S.H.I.S. Stem Clamp Diameter 28.6 Threadless Upper Stack Height 15 Cane Creek 40-Series IS - Integrated Headset Headsets UPC: 840226077741

by Cane Creek

—$175.99

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately) Sealed stainless steel bearings Carbon-friendy compression ring captured in top cover, keeping shims in place 7075 T-6 aluminum cups machined in Fletcher, NC Aluminum dual seal crown race protects lower bearing Interlok spacer compatible 110 year warrranty Item Specifications Bearing Type Cartridge Color Black Crown Race 40 Defined Color Black Lower Stack Height 12 S.H.I.S Lower EC49 S.H.I.S Upper ZS44 S.H.I.S. Stem Clamp Diameter 28.6 Threadless Upper Stack Height 8 Cane Creek 110-Series ZS - Zero Stack Headset Headsets UPC: 840226077772

by Cane Creek

—$29.99

ZN40-Series bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of your headset.Compatible with 110-, 40-, and 10-Series headsets Item Specifications Bearing I.D. (mm) 42 Bearing O.D. (mm) 52 Bearing Type Cartridge Cartridge Bearing Angle 36x45 Thickness 6.5 Cane Creek ZN40-Series Bearing Headset Bearing UPC: 840226078458

by Cane Creek

—$63.99

Cane Creek 40-Series. The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Item Specifications Color Black Weight 143g Material AL-6061 Crown Race 30.0 Stack Height 19mm Bearing Type Black Oxide Sealed Defined Color Black S.H.I.S Upper ZS44 S.H.I.S Lower ZS44 S.H.I.S. Clamp Diameter 28.6 Cane Creek 40-Series ZS - Zero Stack Headset Headsets UPC: 840226094878

by Cane Creek

—$84.99

Cane Creek 110 ZS Headset Lowers 110 version of former Cane Creek XXII ZS bottoms Zero Stack (ZS) assemblies feature press-in cups with bearings inside the frame Item Specifications Color Black Weight 53.7g Material AL-7075 Crown Race 39.7 Stack Height 4mm Bearing Type Stainless Steel S.H.I.S Lower ZS56 Cane Creek 110-Series ZS - Zero Stack Headset Headset Lower UPC: 840226096117

by Cane Creek

—$79.99

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP Compatible with Fox coil shocks with required spring clip adaptor Item Specifications Material Steel Spring Weight 400 Stroke (ins) 2.5 Cane Creek VALT Spring Rear Shock Spring UPC: 840226134437

by Cane Creek

—$10.99

Replacement seals for servicing Cane Creek rear shocks. Cane Creek Seal Kit Rear Shock Part UPC: 840226071527

by Cane Creek

—$14.99

ZN40-Series bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of your headset.Compatible with 110-, 40-, and 10-Series headsets Item Specifications Bearing I.D. (mm) 30.3 Bearing O.D. (mm) 41.8 Bearing Type Cartridge Cartridge Bearing Angle 36x45 Thickness 6.5 Cane Creek ZN40-Series Bearing Headset Bearing UPC: 840226078311

by Cane Creek

—$90

40-Series Zero Stack headsets set the standard for performance, durability and value. Drawing from the premium 110-Series design, the 40-Series includes all the features necessary for a durable, lightweight, long-lasting headset. Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately) Sealed ZN40 cartridge bearings 6000 series alloy cups and materials Steel crown race with integrated seals Interlok spacer compatible Item Specifications Bearing Type Cartridge Color Black Crown Race 40 Defined Color Black Lower Stack Height 12 S.H.I.S Lower EC49 S.H.I.S Upper EC49 S.H.I.S. Stem Clamp Diameter 28.6 Threadless Upper Stack Height 8 Cane Creek 40-Series ZS - Zero Stack Headset Headsets UPC: 840226077444

by Cane Creek

—$94.99

Cane Creek Headset Uppers Replaces 110 ZS headset top ZS44/28.6 fits 1-1/8" steerer tube tops (28.6mm stem clamp diameter) to 44mm (1-1/8") head tube tops Zero Stack (ZS) assemblies feature press-in cups with bearings inside the frame 8mm stack height (short) top cover Internally contoured and relieved cups and covers minimize weight and maximize strength Top-quality polishing, anodizing and laser etching Low-friction top cover seal completely seals cup from solid and liquid contaminants Fully captured top cover - no loose parts Updated compression ring design further enhances "carbon friendly" uses by evenly distributing clamping forces on the steerer Interlok spacer compatible Item Specifications Color Black Weight 52.8g Material AL-7075 Stack Height 8mm Bearing Type Stainless Steel S.H.I.S Upper ZS44 S.H.I.S. Clamp Diameter 28.6 Cane Creek 110 ZS Headset Headset Upper UPC: 840226096056

by Cane Creek

—$12.99

Cane Creek Crown Races Compatible across 10, 40 and 110 Series headsets and backwards compatible with S and XX Series All crown races feature integral molded seals Cane Creek Crown Races Crown Race UPC: 840226077536

by Cane Creek

—$79.99

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP Compatible with Fox coil shocks with required spring clip adaptor Item Specifications Material Steel Spring Weight 450 Stroke (ins) 2.5 Cane Creek VALT Spring Rear Shock Spring UPC: 840226134444

by Cane Creek

—$79.99

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP Compatible with Fox coil shocks with required spring clip adaptor Item Specifications Material Steel Spring Weight 350 Stroke (ins) 2.25 Cane Creek VALT Spring Rear Shock Spring UPC: 840226134840

by Cane Creek

—$39.99

Cane Creek Headset Uppers Innovative Clip-Seal seals the top assembly and captures the compression ring Internal parts are cross-compatible across 10, 40 and 110 series Consistent stack heights across 10, 40 and 110 series Item Specifications Color Black Weight 42g Material AL-6061 Stack Height 15mm Bearing Type Black Oxide Sealed S.H.I.S Upper IS42 S.H.I.S. Clamp Diameter 28.6 Cane Creek 40-Series IS - Integrated Headset Headset Upper UPC: 840226095172

by Cane Creek

—$99.99

Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. Springs feature the progressiveness and ramp-up that hard-charging riders demand Designed for use with Cane Creek Coil shocks Progression begins at 50% into the stroke of the spring Crafted from high-performance spring steel Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks Item Specifications I.D. (mm) 36.5 Material Steel Spring Weight 400-488 Stroke (ins) 2.17 Cane Creek Progressive VALT Spring Rear Shock Spring UPC: 840226083032

by Cane Creek

—$44.99

Cane Creek 40-Series EC(External Cups) assemblies feature press-in cups with bearings outside the frame. The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Item Specifications Color Black Weight 76g Material AL-6061 Crown Race 39.7 Stack Height 12mm Bearing Type Black Oxide Sealed S.H.I.S Lower EC49 Cane Creek 40-Series EC - External Cup Headset Headset Lower UPC: 840226094830

by Cane Creek

—$79.99

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP Compatible with Fox coil shocks with required spring clip adaptor Item Specifications Material Steel Spring Weight 400 Stroke (ins) 2.25 Cane Creek VALT Spring Rear Shock Spring UPC: 840226134406

by Cane Creek

—$79.99

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP Compatible with Fox coil shocks with required spring clip adaptor Item Specifications Material Steel Spring Weight 500 Stroke (ins) 2.25 Cane Creek VALT Spring Rear Shock Spring UPC: 840226134420

by Cane Creek

—$13.40

ZN40-Series bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of your headset.Compatible with 110-, 40-, and 10-Series headsets Item Specifications Bearing I.D. (mm) 27.25 Bearing O.D. (mm) 38 Bearing Type Cartridge Cartridge Bearing Angle 36x45 Thickness 6.5 Cane Creek ZN40-Series Bearing Headset Bearing UPC: 840226078366

by Cane Creek

—$19.99

Preload assembly from Cane Creek. Cane Creek Preload Assembly Headset Top Cap UPC: 840226090603

by Cane Creek

—$94.99

110 IS Headset Upper Sealed stainless steel bearings Carbon-friendy compression ring captured in top cover, keeping shims in place 7075 T-6 aluminum cups machined in Fletcher, NC Interlok spacer compatible 110 year warrranty Item Specifications Bearing Type Cartridge Color Black S.H.I.S Upper IS42 S.H.I.S. Stem Clamp Diameter 28.6 Threadless Upper Stack Height 15 Cane Creek 110 IS Headset Upper UPC: 840226077499

by Cane Creek